[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-41-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #89-Ubuntu SMP Fri Apr 27 22:22:09 UTC 2012 (Ubuntu 2.6.32-41.89-generic 2.6.32.59+drm33.24) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097000 (usable) [ 0.000000] BIOS-e820: 0000000000097000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6b0000 (usable) [ 0.000000] BIOS-e820: 000000003f6b0000 - 000000003f6c0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f6c0000 - 000000003f6c3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6c3000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3f6b0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000097000 (usable) [ 0.000000] modified: 0000000000097000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f6b0000 (usable) [ 0.000000] modified: 000000003f6b0000 - 000000003f6c0000 (ACPI data) [ 0.000000] modified: 000000003f6c0000 - 000000003f6c3000 (ACPI NVS) [ 0.000000] modified: 000000003f6c3000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 8ea000-9cb000 [ 0.000000] RAMDISK: 2f1a4000 - 2f943e56 [ 0.000000] ACPI: RSDP 000f7d60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 3f6bb480 00074 (v01 DELL M09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3f6bfbca 000F4 (v03 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: DSDT 3f6bc36b 037EB (v01 INTEL POULSBO 06040000 INTL 20060608) [ 0.000000] ACPI: FACS 3f6c2fc0 00040 [ 0.000000] ACPI: HPET 3f6bfcbe 00038 (v01 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: MCFG 3f6bfcf6 0003C (v01 INTEL POULSBO 06040000 INTC 00000032) [ 0.000000] ACPI: TCPA 3f6bfd32 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) [ 0.000000] ACPI: TMOR 3f6bfd64 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: OSFR 3f6bfd8a 00070 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: APIC 3f6bfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 3f6bfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 3f6bfe8a 00176 (v01 DELL M09 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 3f6bb4f4 004DC (v02 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00007000 - 0000df00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e5f18] TEXT DATA BSS ==> [0000100000 - 00008e5f18] [ 0.000000] #4 [002f1a4000 - 002f943e56] RAMDISK ==> [002f1a4000 - 002f943e56] [ 0.000000] #5 [0000097000 - 0000100000] BIOS reserved ==> [0000097000 - 0000100000] [ 0.000000] #6 [00008e6000 - 00008e910c] BRK ==> [00008e6000 - 00008e910c] [ 0.000000] #7 [00008ea000 - 00009c5000] PGTABLE ==> [00008ea000 - 00009c5000] [ 0.000000] #8 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000] [ 0.000000] found SMP MP-table at [c00f7df0] f7df0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f6b0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000097 [ 0.000000] 0: 0x00000100 -> 0x0003f6b0 [ 0.000000] On node 0 totalpages: 259651 [ 0.000000] free_area_init_node: node 0, pgdat c07a0a20, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3955 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 254 pages used for memmap [ 0.000000] HighMem zone: 32180 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257621 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=3f69b313-c90f-4099-9c3f-6776979f5deb ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5195200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6b0) [ 0.000000] Memory: 1007180k/1039040k available (4698k kernel code, 30944k reserved, 2129k data, 664k init, 129736k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07ab000 - 0xc0851000 ( 664 kB) [ 0.000000] .data : 0xc0596b07 - 0xc07aafc8 (2129 kB) [ 0.000000] .text : 0xc0100000 - 0xc0596b07 (4698 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1330.235 MHz processor. [ 0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.47 BogoMIPS (lpj=5320940) [ 0.008059] Security Framework initialized [ 0.008113] AppArmor: AppArmor initialized [ 0.008134] Mount-cache hash table entries: 512 [ 0.008441] Initializing cgroup subsys ns [ 0.008453] Initializing cgroup subsys cpuacct [ 0.008465] Initializing cgroup subsys memory [ 0.008483] Initializing cgroup subsys devices [ 0.008490] Initializing cgroup subsys freezer [ 0.008497] Initializing cgroup subsys net_cls [ 0.008542] Atom PSE erratum detected, BIOS microcode update recommended [ 0.008554] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.008562] CPU: L2 cache: 512K [ 0.008569] CPU: Physical Processor ID: 0 [ 0.008575] CPU: Processor Core ID: 0 [ 0.008584] mce: CPU supports 5 MCE banks [ 0.008605] CPU0: Thermal monitoring enabled (TM1) [ 0.008615] using mwait in idle threads. [ 0.008631] Performance Events: Atom events, Intel PMU driver. [ 0.008651] ... version: 3 [ 0.008656] ... bit width: 40 [ 0.008662] ... generic registers: 2 [ 0.008668] ... value mask: 000000ffffffffff [ 0.008674] ... max period: 000000007fffffff [ 0.008680] ... fixed-purpose events: 3 [ 0.008686] ... event mask: 0000000700000003 [ 0.008698] Checking 'hlt' instruction... OK. [ 0.024017] Disabling 4MB page tables to avoid TLB bug [ 0.029403] ACPI: Core revision 20090903 [ 0.040022] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040036] ftrace: allocating 21839 entries in 43 pages [ 0.044150] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084462] CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.012000] CPU: L2 cache: 512K [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 0 [ 0.012000] CPU1: Thermal monitoring enabled (TM1) [ 0.172088] CPU1: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02 [ 0.172106] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176052] Brought up 2 CPUs [ 0.176062] Total of 2 processors activated (5320.42 BogoMIPS). [ 0.176516] CPU0 attaching sched-domain: [ 0.176526] domain 0: span 0-1 level SIBLING [ 0.176533] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.176548] domain 1: span 0-1 level MC [ 0.176555] groups: 0-1 (cpu_power = 1178) [ 0.176569] CPU1 attaching sched-domain: [ 0.176575] domain 0: span 0-1 level SIBLING [ 0.176581] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.176595] domain 1: span 0-1 level MC [ 0.176601] groups: 0-1 (cpu_power = 1178) [ 0.176815] devtmpfs: initialized [ 0.176815] regulator: core version 0.5 [ 0.176815] Time: 21:30:27 Date: 05/24/12 [ 0.176815] NET: Registered protocol family 16 [ 0.176815] Trying to unpack rootfs image as initramfs... [ 0.176815] EISA bus registered [ 0.176815] ACPI: bus type pci registered [ 0.176937] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176949] PCI: MCFG area at e0000000 reserved in E820 [ 0.176956] PCI: Using MMCONFIG for extended config space [ 0.176964] PCI: Using configuration type 1 for base access [ 0.183469] bio: create slab at 0 [ 0.185838] ACPI: EC: Look up EC in DSDT [ 0.192153] ACPI: BIOS _OSI(Linux) query ignored [ 0.193437] ACPI: Interpreter enabled [ 0.193437] ACPI: (supports S0 S3 S4 S5) [ 0.193437] ACPI: Using IOAPIC for interrupt routing [ 0.245675] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62 [ 0.246402] ACPI: No dock devices found. [ 0.247175] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.247447] pci 0000:00:02.0: reg 10 32bit mmio: [0xd8100000-0xd817ffff] [ 0.247465] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.247481] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.247498] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd8380000-0xd839ffff] [ 0.247676] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd83a0000-0xd83a3fff] [ 0.247760] pci 0000:00:1b.0: PME# supported from D0 D3hot [ 0.247771] pci 0000:00:1b.0: PME# disabled [ 0.247893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.247904] pci 0000:00:1c.0: PME# disabled [ 0.248064] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.248076] pci 0000:00:1c.1: PME# disabled [ 0.248157] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.248244] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.248339] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.248446] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd83a4000-0xd83a43ff] [ 0.248566] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.248579] pci 0000:00:1d.7: PME# disabled [ 0.248722] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.248842] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.248877] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xd8410000-0xd8410fff] [ 0.248905] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xd8400000-0xd840ffff] [ 0.248924] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.249021] pci 0000:02:00.0: supports D1 D2 [ 0.249029] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249042] pci 0000:02:00.0: PME# disabled [ 0.249137] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.249152] pci 0000:00:1c.0: bridge 32bit mmio pref: [0xd8400000-0xd84fffff] [ 0.249253] pci 0000:03:00.0: reg 10 64bit mmio: [0xd8000000-0xd8003fff] [ 0.249402] pci 0000:03:00.0: supports D1 D2 [ 0.249411] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.249424] pci 0000:03:00.0: PME# disabled [ 0.249523] pci 0000:00:1c.1: bridge 32bit mmio: [0xd8000000-0xd80fffff] [ 0.249551] pci_bus 0000:00: on NUMA node 0 [ 0.249571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.250085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.250338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.264156] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 5 6 *7 10 12 14 15) [ 0.264466] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 5 6 7 11 12 14 15) *10 [ 0.264789] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 5 6 7 10 12 14 15) [ 0.265082] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 *5 6 7 11 12 14 15) [ 0.265373] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 5 6 7 10 12 14 15) *0, disabled. [ 0.265687] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 5 6 7 *11 12 14 15) [ 0.265982] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 5 6 7 10 12 14 15) *11 [ 0.266275] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 5 6 7 11 12 14 15) *10 [ 0.266684] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.266714] vgaarb: loaded [ 0.267131] SCSI subsystem initialized [ 0.267438] libata version 3.00 loaded. [ 0.267753] usbcore: registered new interface driver usbfs [ 0.267809] usbcore: registered new interface driver hub [ 0.267936] usbcore: registered new device driver usb [ 0.268569] ACPI: WMI: Mapper loaded [ 0.268578] PCI: Using ACPI for IRQ routing [ 0.269014] NetLabel: Initializing [ 0.269022] NetLabel: domain hash size = 128 [ 0.269028] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.269068] NetLabel: unlabeled traffic allowed by default [ 0.269200] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.269214] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.269232] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.272359] Switching to clocksource tsc [ 0.278171] AppArmor: AppArmor Filesystem Enabled [ 0.278224] pnp: PnP ACPI init [ 0.278278] ACPI: bus type pnp registered [ 0.299118] pnp: PnP ACPI: found 10 devices [ 0.299128] ACPI: ACPI bus type pnp unregistered [ 0.299141] PnPBIOS: Disabled by ACPI PNP [ 0.299183] system 00:01: iomem range 0xfd000000-0xfd003fff has been reserved [ 0.299196] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.299208] system 00:01: iomem range 0xfed00000-0xfed3ffff could not be reserved [ 0.299220] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.299231] system 00:01: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.299264] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.299295] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.299309] system 00:06: ioport range 0x8080-0x8080 has been reserved [ 0.299321] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.299332] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.299344] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.299357] system 00:06: ioport range 0x374-0x375 has been reserved [ 0.299368] system 00:06: ioport range 0x3f4-0x3f5 has been reserved [ 0.334635] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.334651] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.334666] pci 0000:00:1c.0: MEM window: 0x40000000-0x403fffff [ 0.334679] pci 0000:00:1c.0: PREFETCH window: 0xd8400000-0xd84fffff [ 0.334698] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.334711] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.334726] pci 0000:00:1c.1: MEM window: 0xd8000000-0xd80fffff [ 0.334740] pci 0000:00:1c.1: PREFETCH window: 0x40400000-0x405fffff [ 0.334785] alloc irq_desc for 17 on node -1 [ 0.334794] alloc kstat_irqs on node -1 [ 0.334815] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.334830] pci 0000:00:1c.0: setting latency timer to 64 [ 0.334852] alloc irq_desc for 16 on node -1 [ 0.334859] alloc kstat_irqs on node -1 [ 0.334872] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.334885] pci 0000:00:1c.1: setting latency timer to 64 [ 0.334899] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.334909] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.334919] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.334930] pci_bus 0000:02: resource 1 mem: [0x40000000-0x403fffff] [ 0.334940] pci_bus 0000:02: resource 2 pref mem [0xd8400000-0xd84fffff] [ 0.334951] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.334961] pci_bus 0000:03: resource 1 mem: [0xd8000000-0xd80fffff] [ 0.334972] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff] [ 0.335095] NET: Registered protocol family 2 [ 0.335431] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.336604] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.338183] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.339061] TCP: Hash tables configured (established 131072 bind 65536) [ 0.339079] TCP reno registered [ 0.339473] NET: Registered protocol family 1 [ 0.339541] pci 0000:00:02.0: Boot video device [ 0.339591] alloc irq_desc for 23 on node -1 [ 0.339600] alloc kstat_irqs on node -1 [ 0.339622] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.339651] pci 0000:00:1d.0: PCI INT A disabled [ 0.339673] alloc irq_desc for 19 on node -1 [ 0.339680] alloc kstat_irqs on node -1 [ 0.339694] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.339721] pci 0000:00:1d.1: PCI INT B disabled [ 0.339741] alloc irq_desc for 18 on node -1 [ 0.339748] alloc kstat_irqs on node -1 [ 0.339761] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.339787] pci 0000:00:1d.2: PCI INT C disabled [ 0.339816] alloc irq_desc for 21 on node -1 [ 0.339823] alloc kstat_irqs on node -1 [ 0.339837] pci 0000:00:1d.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.339897] pci 0000:00:1d.7: PCI INT D disabled [ 0.339989] Simple Boot Flag at 0x36 set to 0x1 [ 0.340628] cpufreq-nforce2: No nForce2 chipset. [ 0.340729] Scanning for low memory corruption every 60 seconds [ 0.341133] audit: initializing netlink socket (disabled) [ 0.341166] type=2000 audit(1337895027.338:1): initialized [ 0.367250] highmem bounce pool size: 64 pages [ 0.367270] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.373874] VFS: Disk quotas dquot_6.5.2 [ 0.374112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.376705] fuse init (API version 7.13) [ 0.377088] msgmni has been set to 1714 [ 0.377980] alg: No test for stdrng (krng) [ 0.378220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.378232] io scheduler noop registered [ 0.378239] io scheduler anticipatory registered [ 0.378247] io scheduler deadline registered [ 0.378414] io scheduler cfq registered (default) [ 0.378803] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.379023] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.379233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.379484] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.380161] ACPI: AC Adapter [ACAD] (off-line) [ 0.380395] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.380499] ACPI: Lid Switch [LID0] [ 0.380663] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.380680] ACPI: Power Button [PWRB] [ 0.380887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.380899] ACPI: Power Button [PWRF] [ 0.380916] ACPI Error: Could not enable PowerButton event (20090903/evxfevnt-193) [ 0.380934] ACPI Warning: Could not enable fixed event 2 (20090903/evxface-146) [ 0.381086] button: probe of LNXPWRBN:00 failed with error -22 [ 0.382904] ACPI: SSDT 3f6bc094 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.384264] ACPI: SSDT 3f6bb9d0 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.385756] Monitor-Mwait will be used to enter C-1 state [ 0.385881] Monitor-Mwait will be used to enter C-2 state [ 0.385987] Monitor-Mwait will be used to enter C-3 state [ 0.386092] Monitor-Mwait will be used to enter C-3 state [ 0.386117] Marking TSC unstable due to TSC halts in idle [ 0.386291] processor LNXCPU:00: registered as cooling_device0 [ 0.386458] ACPI: SSDT 3f6bc297 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.386458] ACPI: SSDT 3f6bc00f 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.387465] Switching to clocksource hpet [ 0.400854] processor LNXCPU:01: registered as cooling_device1 [ 0.432245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.437510] brd: module loaded [ 0.439525] loop: module loaded [ 0.439890] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.440192] isapnp: Scanning for PnP cards... [ 0.440516] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 0.441717] Fixed MDIO Bus: probed [ 0.441850] PPP generic driver version 2.4.2 [ 0.441995] tun: Universal TUN/TAP device driver, 1.6 [ 0.442003] tun: (C) 1999-2004 Max Krasnyansky [ 0.442297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.442347] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.442390] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.442401] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.442533] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.442611] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.446515] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.446558] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd83a4000 [ 0.461256] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.461626] usb usb1: configuration #1 chosen from 1 choice [ 0.461755] hub 1-0:1.0: USB hub found [ 0.461783] hub 1-0:1.0: 8 ports detected [ 0.461982] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.462039] uhci_hcd: USB Universal Host Controller Interface driver [ 0.462146] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.462168] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.462178] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.462325] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.462393] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 0.462700] usb usb2: configuration #1 chosen from 1 choice [ 0.462798] hub 2-0:1.0: USB hub found [ 0.462823] hub 2-0:1.0: 2 ports detected [ 0.462975] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.462994] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.463003] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.463116] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.463172] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 0.463468] usb usb3: configuration #1 chosen from 1 choice [ 0.463566] hub 3-0:1.0: USB hub found [ 0.463589] hub 3-0:1.0: 2 ports detected [ 0.463726] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.463743] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.463753] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.463879] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.463934] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 0.464235] usb usb4: configuration #1 chosen from 1 choice [ 0.464333] hub 4-0:1.0: USB hub found [ 0.464356] hub 4-0:1.0: 2 ports detected [ 0.464650] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.501319] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.501356] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.501729] mice: PS/2 mouse device common for all mice [ 0.502106] rtc_cmos 00:07: RTC can wake from S4 [ 0.502256] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.502301] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.502710] device-mapper: uevent: version 1.0.3 [ 0.509692] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.541186] device-mapper: multipath: version 1.1.0 loaded [ 0.541199] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.549497] EISA: Probing bus 0 at eisa.0 [ 0.549516] Cannot allocate resource for EISA slot 1 [ 0.549526] Cannot allocate resource for EISA slot 2 [ 0.549533] Cannot allocate resource for EISA slot 3 [ 0.549566] Cannot allocate resource for EISA slot 8 [ 0.549573] EISA: Detected 0 cards. [ 0.556011] cpuidle: using governor ladder [ 0.556518] cpuidle: using governor menu [ 0.558014] TCP cubic registered [ 0.558629] NET: Registered protocol family 10 [ 0.561736] NET: Registered protocol family 17 [ 0.565697] Using IPI No-Shortcut mode [ 0.566009] PM: Resume from disk failed. [ 0.566045] registered taskstats version 1 [ 0.570261] Magic number: 12:503:551 [ 0.570353] pci_link PNP0C0F:02: hash matches [ 0.570421] rtc_cmos 00:07: setting system clock to 2012-05-24 21:30:28 UTC (1337895028) [ 0.570432] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.570438] EDD information not available. [ 0.571950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.679189] ACPI: Battery Slot [BAT1] (battery present) [ 0.795309] Freeing initrd memory: 7807k freed [ 0.796723] isapnp: No Plug & Play device found [ 0.807202] Freeing unused kernel memory: 664k freed [ 0.808293] Write protecting the kernel text: 4700k [ 0.808399] Write protecting the kernel read-only data: 1848k [ 0.855840] udev: starting version 151 [ 1.028323] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.117653] pata_sch 0000:00:1f.1: version 0.2 [ 1.117758] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 1.144293] scsi0 : pata_sch [ 1.157185] scsi1 : pata_sch [ 1.158425] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.158439] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.180409] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.180463] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.180542] r8169 0000:02:00.0: setting latency timer to 64 [ 1.180614] alloc irq_desc for 24 on node -1 [ 1.180624] alloc kstat_irqs on node -1 [ 1.180656] r8169 0000:02:00.0: irq 24 for MSI/MSI-X [ 1.183105] eth0: RTL8102e at 0xf8050000, 00:21:70:f8:95:e7, XID 04a00000 IRQ 24 [ 1.206956] usb 1-6: configuration #1 chosen from 1 choice [ 1.320302] usb 1-7: new high speed USB device using ehci_hcd and address 4 [ 1.320989] ata1.00: ATA-7: SAMSUNG HS04THB, NK100-05, max UDMA/100 [ 1.321000] ata1.00: 78140160 sectors, multi 16: LBA [ 1.329042] ata1.00: configured for UDMA/100 [ 1.329382] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS04THB NK10 PQ: 0 ANSI: 5 [ 1.329973] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.330057] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.330522] sd 0:0:0:0: [sda] Write Protect is off [ 1.330533] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.330647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.331229] sda: [ 1.465278] usb 1-7: configuration #1 chosen from 1 choice [ 1.492387] Initializing USB Mass Storage driver... [ 1.492767] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.493363] usbcore: registered new interface driver usb-storage [ 1.493371] USB Mass Storage support registered. [ 1.493692] usb-storage: device found at 4 [ 1.493699] usb-storage: waiting for device to settle before scanning [ 1.499304] sda1 sda2 sda3 < sda5 > [ 1.534916] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.709128] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.878958] usb 3-1: configuration #1 chosen from 1 choice [ 2.049385] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 6.484515] usb-storage: device scan complete [ 6.486871] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6.488571] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.493081] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 25.219030] udev: starting version 151 [ 25.378914] lp: driver loaded but no devices found [ 25.609200] vga16fb: initializing [ 25.609215] vga16fb: mapped to 0xc00a0000 [ 25.609453] fb0: VGA16 VGA frame buffer device [ 25.742951] lib80211: common routines for IEEE802.11 drivers [ 25.742983] lib80211_crypt: registered algorithm 'NULL' [ 25.911228] wl: module license 'MIXED/Proprietary' taints kernel. [ 25.911239] Disabling lock debugging due to kernel taint [ 26.096389] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 26.096409] wl 0000:03:00.0: setting latency timer to 64 [ 26.185725] Linux video capture interface: v2.00 [ 26.271442] Bluetooth: Core ver 2.15 [ 26.275065] NET: Registered protocol family 31 [ 26.275075] Bluetooth: HCI device and connection manager initialized [ 26.275086] Bluetooth: HCI socket layer initialized [ 26.324418] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 26.328144] usbcore: registered new interface driver btusb [ 26.336299] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 26.356758] compal-laptop: Identified laptop model 'Dell Mini 12'. [ 26.360744] compal-laptop: driver 0.2.6 successfully loaded. [ 26.402801] lib80211_crypt: registered algorithm 'TKIP' [ 26.403104] uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e6) [ 26.416261] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 [ 26.417428] dell-laptop: Blacklisted hardware detected - not loading [ 26.421330] input: Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input5 [ 26.421598] usbcore: registered new interface driver uvcvideo [ 26.421610] USB Video Class driver (v0.1.0) [ 26.551772] dell-wmi: No known WMI GUID found [ 26.623682] Console: switching to colour frame buffer device 80x30 [ 26.714014] type=1505 audit(1337884254.642:2): operation="profile_load" pid=576 name="/sbin/dhclient3" [ 26.715045] type=1505 audit(1337884254.642:3): operation="profile_load" pid=576 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 26.715656] type=1505 audit(1337884254.642:4): operation="profile_load" pid=576 name="/usr/lib/connman/scripts/dhclient-script" [ 26.718071] type=1505 audit(1337884254.646:5): operation="profile_replace" pid=548 name="/sbin/dhclient3" [ 26.719137] type=1505 audit(1337884254.646:6): operation="profile_replace" pid=548 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 26.719764] type=1505 audit(1337884254.646:7): operation="profile_replace" pid=548 name="/usr/lib/connman/scripts/dhclient-script" [ 27.287092] alloc irq_desc for 22 on node -1 [ 27.287103] alloc kstat_irqs on node -1 [ 27.287126] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 27.287954] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 27.309116] type=1505 audit(1337884255.238:8): operation="profile_load" pid=706 name="/usr/share/gdm/guest-session/Xsession" [ 27.318140] type=1505 audit(1337884255.246:9): operation="profile_replace" pid=707 name="/sbin/dhclient3" [ 27.321009] type=1505 audit(1337884255.246:10): operation="profile_replace" pid=707 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 27.321606] type=1505 audit(1337884255.250:11): operation="profile_replace" pid=707 name="/usr/lib/connman/scripts/dhclient-script" [ 27.512272] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000 [ 27.516187] r8169: eth0: link down [ 27.517103] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.561981] hda_codec: ALC269: BIOS auto-probing. [ 27.562632] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 27.598546] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 28.365906] Bluetooth: L2CAP ver 2.14 [ 28.365916] Bluetooth: L2CAP socket layer initialized [ 28.409890] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.409903] Bluetooth: BNEP filters: protocol multicast [ 28.458831] Bridge firewalling registered [ 28.495210] Bluetooth: SCO (Voice Link) ver 0.6 [ 28.495220] Bluetooth: SCO socket layer initialized [ 28.550710] ppdev: user-space parallel port driver [ 28.632763] Bluetooth: RFCOMM TTY layer initialized [ 28.632782] Bluetooth: RFCOMM socket layer initialized [ 28.632791] Bluetooth: RFCOMM ver 1.11 [ 30.594902] CPU0 attaching NULL sched-domain. [ 30.594922] CPU1 attaching NULL sched-domain. [ 30.625252] CPU0 attaching sched-domain: [ 30.625266] domain 0: span 0-1 level SIBLING [ 30.625276] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 30.625296] domain 1: span 0-1 level MC [ 30.625305] groups: 0-1 (cpu_power = 1178) [ 30.625324] CPU1 attaching sched-domain: [ 30.625332] domain 0: span 0-1 level SIBLING [ 30.625340] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 30.625361] domain 1: span 0-1 level MC [ 30.625369] groups: 0-1 (cpu_power = 1178) [ 31.067083] CPU0 attaching NULL sched-domain. [ 31.067101] CPU1 attaching NULL sched-domain. [ 31.088193] CPU0 attaching sched-domain: [ 31.088204] domain 0: span 0-1 level SIBLING [ 31.088212] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 31.088227] domain 1: span 0-1 level MC [ 31.088233] groups: 0-1 (cpu_power = 1178) [ 31.088248] CPU1 attaching sched-domain: [ 31.088253] domain 0: span 0-1 level SIBLING [ 31.088259] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 31.088273] domain 1: span 0-1 level MC [ 31.088279] groups: 0-1 (cpu_power = 1178) [ 32.080652] CPU0 attaching NULL sched-domain. [ 32.080671] CPU1 attaching NULL sched-domain. [ 32.101457] CPU0 attaching sched-domain: [ 32.101471] domain 0: span 0-1 level SIBLING [ 32.101483] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 32.101505] domain 1: span 0-1 level MC [ 32.101515] groups: 0-1 (cpu_power = 1178) [ 32.101536] CPU1 attaching sched-domain: [ 32.101545] domain 0: span 0-1 level SIBLING [ 32.101555] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 32.101577] domain 1: span 0-1 level MC [ 32.101586] groups: 0-1 (cpu_power = 1178) [ 35.643783] CPU0 attaching NULL sched-domain. [ 35.643803] CPU1 attaching NULL sched-domain. [ 35.665189] CPU0 attaching sched-domain: [ 35.665204] domain 0: span 0-1 level SIBLING [ 35.665214] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 35.665234] domain 1: span 0-1 level MC [ 35.665242] groups: 0-1 (cpu_power = 1178) [ 35.665262] CPU1 attaching sched-domain: [ 35.665271] domain 0: span 0-1 level SIBLING [ 35.665280] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 35.665298] domain 1: span 0-1 level MC [ 35.665305] groups: 0-1 (cpu_power = 1178) [ 35.856996] hda-intel: Invalid position buffer, using LPIB read method instead. [ 35.857048] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 38.209037] eth1: no IPv6 routers present [ 4128.845506] CPU0 attaching NULL sched-domain. [ 4128.845522] CPU1 attaching NULL sched-domain. [ 4128.868453] CPU0 attaching sched-domain: [ 4128.868473] domain 0: span 0-1 level SIBLING [ 4128.868486] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 4128.868512] domain 1: span 0-1 level MC [ 4128.868523] groups: 0-1 (cpu_power = 1178) [ 4128.868548] CPU1 attaching sched-domain: [ 4128.868558] domain 0: span 0-1 level SIBLING [ 4128.868568] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 4128.868591] domain 1: span 0-1 level MC [ 4128.868602] groups: 0-1 (cpu_power = 1178) [ 4133.065573] PM: Syncing filesystems ... done. [ 4133.078553] PM: Preparing system for mem sleep [ 4133.078564] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 4133.081294] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 4133.081567] PM: Entering mem sleep [ 4133.081593] Suspending console(s) (use no_console_suspend to debug) [ 4133.084051] btusb_intr_complete: hci0 urb f537ca80 failed to resubmit (1) [ 4133.085038] btusb_bulk_complete: hci0 urb f537c000 failed to resubmit (1) [ 4133.086050] btusb_bulk_complete: hci0 urb f537c680 failed to resubmit (1) [ 4133.116320] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4133.307510] sd 0:0:0:0: [sda] Stopping disk [ 4133.725878] PM: suspend of drv:sd dev:0:0:0:0 complete after 609.560 msecs [ 4134.169678] PM: suspend of drv:psmouse dev:serio1 complete after 429.355 msecs [ 4134.272287] PM: suspend of drv:atkbd dev:serio0 complete after 102.552 msecs [ 4134.276537] ACPI handle has no context! [ 4134.276666] wl 0000:03:00.0: PCI INT A disabled [ 4134.292869] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 4134.292889] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 4134.292903] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 4134.292916] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 4134.396361] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 4134.412297] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.343 msecs [ 4134.412557] PM: suspend of devices complete after 1330.641 msecs [ 4134.412567] PM: suspend devices took 1.332 seconds [ 4134.412940] r8169 0000:02:00.0: PME# enabled [ 4134.432126] r8169 0000:02:00.0: wake-up capability enabled by ACPI [ 4134.464234] PM: late suspend of devices complete after 51.656 msecs [ 4134.464305] ACPI: Preparing to enter system sleep state S3 [ 4134.465221] Disabling non-boot CPUs ... [ 4134.465270] CPU0 attaching NULL sched-domain. [ 4134.465280] CPU1 attaching NULL sched-domain. [ 4134.512035] CPU0 attaching NULL sched-domain. [ 4134.513303] Breaking affinity for irq 12 [ 4134.513321] Breaking affinity for irq 17 [ 4134.513335] Breaking affinity for irq 21 [ 4134.513343] Breaking affinity for irq 22 [ 4134.616035] CPU 1 is now offline [ 4134.616042] SMP alternatives: switching to UP code [ 4134.623587] Extended CMOS year: 2000 [ 4134.623587] Back to C! [ 4134.623587] CPU0: Thermal monitoring enabled (TM1) [ 4134.623587] Extended CMOS year: 2000 [ 4134.623587] Enabling non-boot CPUs ... [ 4134.624357] SMP alternatives: switching to SMP code [ 4134.630362] Booting processor 1 APIC 0x1 ip 0x6000 [ 4134.623479] Initializing CPU#1 [ 4134.623479] Atom PSE erratum detected, BIOS microcode update recommended [ 4134.623479] CPU: L1 I cache: 32K, L1 D cache: 24K [ 4134.623479] CPU: L2 cache: 512K [ 4134.623479] CPU: Physical Processor ID: 0 [ 4134.623479] CPU: Processor Core ID: 0 [ 4134.623479] CPU1: Thermal monitoring enabled (TM1) [ 4134.720086] CPU1: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02 [ 4134.720233] CPU0 attaching NULL sched-domain. [ 4134.748046] CPU0 attaching sched-domain: [ 4134.748056] domain 0: span 0-1 level SIBLING [ 4134.748065] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 4134.748082] domain 1: span 0-1 level MC [ 4134.748090] groups: 0-1 (cpu_power = 1178) [ 4134.748104] CPU1 attaching sched-domain: [ 4134.748111] domain 0: span 0-1 level SIBLING [ 4134.748119] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 4134.748135] domain 1: span 0-1 level MC [ 4134.748142] groups: 0-1 (cpu_power = 1178) [ 4134.753051] CPU1 is up [ 4134.753404] ACPI: Waking up from system sleep state S3 [ 4134.804831] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xfef00004, writing 0xd83a0004) [ 4134.804846] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4134.804861] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 4134.804908] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x0, writing 0xd840d840) [ 4134.804921] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x40304000) [ 4134.804934] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x2020) [ 4134.804951] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4134.804966] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4134.805015] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x0, writing 0x40504040) [ 4134.805028] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd800d800) [ 4134.805041] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) [ 4134.805058] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 4134.805073] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4134.805122] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x5, writing 0x1) [ 4134.805165] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x5, writing 0x1) [ 4134.805207] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x5, writing 0x1) [ 4134.805270] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 4134.805395] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 4134.805421] r8169 0000:02:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd840000c) [ 4134.805437] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd841000c) [ 4134.805453] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 4134.805467] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4134.805483] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 4134.805576] wl 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4134.805610] wl 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd8000004) [ 4134.805624] wl 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4134.805640] wl 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 4134.805948] PM: early resume of devices complete after 1.300 msecs [ 4134.937419] PM: resume of drv:battery dev:PNP0C0A:00 complete after 124.983 msecs [ 4134.937508] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4134.937537] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4134.937604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4134.937613] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4134.937640] usb usb2: root hub lost power or was reset [ 4134.937669] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4134.937678] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4134.937703] usb usb3: root hub lost power or was reset [ 4134.937744] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4134.937754] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4134.937778] usb usb4: root hub lost power or was reset [ 4134.937806] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 4134.937817] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4134.937865] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 4134.939182] r8169 0000:02:00.0: wake-up capability disabled by ACPI [ 4134.939198] r8169 0000:02:00.0: PME# disabled [ 4134.939230] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4134.939244] wl 0000:03:00.0: setting latency timer to 64 [ 4135.200298] PM: resume of drv:usb dev:usb1 complete after 249.043 msecs [ 4135.448299] PM: resume of drv:usb dev:usb3 complete after 247.941 msecs [ 4135.515482] sd 0:0:0:0: [sda] Starting disk [ 4135.661658] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 4135.661670] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 4135.678327] ata1.00: configured for UDMA/100 [ 4135.687398] PM: resume of drv:sd dev:0:0:0:0 complete after 171.913 msecs [ 4135.796307] usb 1-7: reset high speed USB device using ehci_hcd and address 4 [ 4135.937044] PM: resume of drv:usb dev:1-7 complete after 249.592 msecs [ 4136.048304] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 4136.200578] btusb 3-1:1.0: no reset_resume for driver btusb? [ 4136.200594] btusb 3-1:1.1: no reset_resume for driver btusb? [ 4136.452780] PM: resume of drv:usb dev:3-1 complete after 515.678 msecs [ 4136.455300] PM: resume of devices complete after 1649.294 msecs [ 4136.456094] PM: resume devices took 1.652 seconds [ 4136.456198] PM: Finishing wakeup. [ 4136.456203] Restarting tasks ... done. [ 4142.106551] r8169: eth0: link down [ 4142.107249] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4144.508429] CPU0 attaching NULL sched-domain. [ 4144.508447] CPU1 attaching NULL sched-domain. [ 4144.525973] CPU0 attaching sched-domain: [ 4144.526023] domain 0: span 0-1 level SIBLING [ 4144.526040] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 4144.526067] domain 1: span 0-1 level MC [ 4144.526078] groups: 0-1 (cpu_power = 1178) [ 4144.526128] CPU1 attaching sched-domain: [ 4144.526136] domain 0: span 0-1 level SIBLING [ 4144.526144] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 4144.526160] domain 1: span 0-1 level MC [ 4144.526168] groups: 0-1 (cpu_power = 1178) [ 4145.227024] CPU0 attaching NULL sched-domain. [ 4145.227042] CPU1 attaching NULL sched-domain. [ 4145.248218] CPU0 attaching sched-domain: [ 4145.248232] domain 0: span 0-1 level SIBLING [ 4145.248244] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 4145.248267] domain 1: span 0-1 level MC [ 4145.248276] groups: 0-1 (cpu_power = 1178) [ 4145.248297] CPU1 attaching sched-domain: [ 4145.248306] domain 0: span 0-1 level SIBLING [ 4145.248316] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 4145.248337] domain 1: span 0-1 level MC [ 4145.248347] groups: 0-1 (cpu_power = 1178) [ 4152.573039] eth1: no IPv6 routers present [ 4324.057186] usb 1-1: new high speed USB device using ehci_hcd and address 5 [ 4324.199017] usb 1-1: configuration #1 chosen from 1 choice [ 4324.216241] scsi3 : SCSI emulation for USB Mass Storage devices [ 4324.223098] usb-storage: device found at 5 [ 4324.223108] usb-storage: waiting for device to settle before scanning [ 4329.222095] usb-storage: device scan complete [ 4329.223707] scsi 3:0:0:0: Direct-Access Kingston DT 101 II PMAP PQ: 0 ANSI: 0 CCS [ 4329.227461] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 4330.576787] sd 3:0:0:0: [sdc] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4330.577408] sd 3:0:0:0: [sdc] Write Protect is off [ 4330.577422] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 4330.577431] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 4330.583043] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 4330.583066] sdc: sdc1 [ 4330.591263] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 4330.591282] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 4563.073819] usb 1-1: USB disconnect, address 5 [ 4971.414072] CPU0 attaching NULL sched-domain. [ 4971.414088] CPU1 attaching NULL sched-domain. [ 4971.436452] CPU0 attaching sched-domain: [ 4971.436471] domain 0: span 0-1 level SIBLING [ 4971.436485] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 4971.436511] domain 1: span 0-1 level MC [ 4971.436521] groups: 0-1 (cpu_power = 1178) [ 4971.436547] CPU1 attaching sched-domain: [ 4971.436556] domain 0: span 0-1 level SIBLING [ 4971.436567] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 4971.436590] domain 1: span 0-1 level MC [ 4971.436600] groups: 0-1 (cpu_power = 1178)