[ 0.000000] Linux version 4.10.0-28-generic (buildd@lgw01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 (Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.10.0-28-generic root=UUID=5260b277-c508-4e97-8417-b432a7c6d909 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P5KPL/EPU, BIOS 0403 06/17/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff96d9400ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff96d940099000] 99000 size 24576 [ 0.000000] BRK [0x09a28000, 0x09a28fff] PGTABLE [ 0.000000] BRK [0x09a29000, 0x09a29fff] PGTABLE [ 0.000000] BRK [0x09a2a000, 0x09a2afff] PGTABLE [ 0.000000] BRK [0x09a2b000, 0x09a2bfff] PGTABLE [ 0.000000] BRK [0x09a2c000, 0x09a2cfff] PGTABLE [ 0.000000] BRK [0x09a2d000, 0x09a2dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32e80000-0x35737fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB810 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000007FF90000 000038 (v01 061709 RSDT1538 20090617 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007FF90200 000084 (v02 061709 FACP1538 20090617 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007FF905C0 006611 (v01 A1189 A1189000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000007FF9E000 000040 [ 0.000000] ACPI: APIC 0x000000007FF90390 00006C (v01 061709 APIC1538 20090617 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007FF90400 00003C (v01 061709 OEMMCFG 20090617 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007FF9E040 000061 (v01 061709 OEMB1538 20090617 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007FF96BE0 000038 (v01 061709 OEMHPET 20090617 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7ff65000-0x7ff8ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ff8ffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff8ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff] [ 0.000000] On node 0 totalpages: 524078 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8127 pages used for memmap [ 0.000000] DMA32 zone: 520080 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff96d9bfc00000 s107992 r8192 d31272 u524288 [ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.10.0-28-generic root=UUID=5260b277-c508-4e97-8417-b432a7c6d909 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2000268K/2096312K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 96044K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:456 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2600.119 MHz processor [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.23 BogoMIPS (lpj=10400476) [ 0.004018] pid_max: default: 32768 minimum: 301 [ 0.004030] ACPI: Core revision 20160930 [ 0.011217] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.011255] Security Framework initialized [ 0.011257] Yama: becoming mindful. [ 0.011282] AppArmor: AppArmor initialized [ 0.011453] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012739] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013677] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.013680] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.014127] CPU: Physical Processor ID: 0 [ 0.014128] CPU: Processor Core ID: 0 [ 0.014131] mce: CPU supports 6 MCE banks [ 0.014140] CPU0: Thermal monitoring enabled (TM2) [ 0.014143] process: using mwait in idle threads [ 0.014149] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.014150] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.014321] Freeing SMP alternatives memory: 32K [ 0.016014] ftrace: allocating 34206 entries in 134 pages [ 0.028200] smpboot: Max logical packages: 2 [ 0.028593] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.072000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072000] smp: Bringing up secondary CPUs ... [ 0.072000] x86: Booting SMP configuration: [ 0.072000] .... node #0, CPUs: #1 [ 0.072000] smp: Brought up 1 node, 2 CPUs [ 0.072000] smpboot: Total of 2 processors activated (10400.47 BogoMIPS) [ 0.072265] devtmpfs: initialized [ 0.072265] x86/mm: Memory block size: 128MB [ 0.072546] evm: security.selinux [ 0.072546] evm: security.SMACK64 [ 0.072547] evm: security.SMACK64EXEC [ 0.072548] evm: security.SMACK64TRANSMUTE [ 0.072548] evm: security.SMACK64MMAP [ 0.072549] evm: security.ima [ 0.072549] evm: security.capability [ 0.076033] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes) [ 0.076092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.076101] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.076153] pinctrl core: initialized pinctrl subsystem [ 0.076286] RTC time: 19:04:37, date: 07/29/17 [ 0.076397] NET: Registered protocol family 16 [ 0.084008] cpuidle: using governor ladder [ 0.100006] cpuidle: using governor menu [ 0.100010] PCCT header not found. [ 0.100079] ACPI: bus type PCI registered [ 0.100082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.100204] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.100207] PCI: not using MMCONFIG [ 0.100208] PCI: Using configuration type 1 for base access [ 0.104108] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.104109] mtrr: probably your BIOS does not setup all CPUs. [ 0.104109] mtrr: corrected configuration. [ 0.120025] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.120082] ACPI: Added _OSI(Module Device) [ 0.120082] ACPI: Added _OSI(Processor Device) [ 0.120083] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.120084] ACPI: Added _OSI(Processor Aggregator Device) [ 0.120271] ACPI: Executed 1 blocks of module-level executable AML code [ 0.122723] ACPI: Dynamic OEM Table Load: [ 0.122729] ACPI: SSDT 0xFFFF96D9BCACE400 000256 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.122932] ACPI: Dynamic OEM Table Load: [ 0.122935] ACPI: SSDT 0xFFFF96D9BD09A400 000143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.123346] ACPI: Interpreter enabled [ 0.123366] ACPI: (supports S0 S1 S3 S4 S5) [ 0.123367] ACPI: Using IOAPIC for interrupt routing [ 0.123394] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.124495] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.124504] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.129267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.129273] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.129277] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.129285] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.129475] PCI host bridge to bus 0000:00 [ 0.129478] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.129479] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.129480] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.129482] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.129483] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window] [ 0.129485] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.129493] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.129597] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.129636] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.129674] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.129741] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.129756] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ffc000-0xf9ffffff 64bit] [ 0.129821] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.129899] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.129958] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.130000] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.130047] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.130110] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.130152] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.130195] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.130231] pci 0000:00:1d.0: reg 0x20: [io 0xb480-0xb49f] [ 0.130299] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.130340] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.130376] pci 0000:00:1d.1: reg 0x20: [io 0xb800-0xb81f] [ 0.130443] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.130487] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.130523] pci 0000:00:1d.2: reg 0x20: [io 0xb880-0xb89f] [ 0.130590] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.130631] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.130666] pci 0000:00:1d.3: reg 0x20: [io 0xbc00-0xbc1f] [ 0.130733] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.130780] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.130795] pci 0000:00:1d.7: reg 0x10: [mem 0xf9ffbc00-0xf9ffbfff] [ 0.130868] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.130905] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.130949] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.131024] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.131068] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.131141] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.131144] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.131147] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.131240] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.131252] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.131260] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.131267] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] [ 0.131275] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] [ 0.131283] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.131300] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.131301] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.131302] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.131304] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.131379] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.131390] pci 0000:00:1f.2: reg 0x10: [io 0xb400-0xb407] [ 0.131396] pci 0000:00:1f.2: reg 0x14: [io 0xb080-0xb083] [ 0.131403] pci 0000:00:1f.2: reg 0x18: [io 0xb000-0xb007] [ 0.131410] pci 0000:00:1f.2: reg 0x1c: [io 0xac00-0xac03] [ 0.131416] pci 0000:00:1f.2: reg 0x20: [io 0xa880-0xa88f] [ 0.131449] pci 0000:00:1f.2: PME# supported from D3hot [ 0.131525] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.131571] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.131700] pci 0000:01:00.0: [10de:0641] type 00 class 0x030000 [ 0.131711] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.131720] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.131730] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.131736] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.131742] pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref] [ 0.131837] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.131839] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.131841] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.131844] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.131889] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.131949] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.131967] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.131993] pci 0000:02:00.0: reg 0x18: [mem 0xf8fff000-0xf8ffffff 64bit pref] [ 0.132012] pci 0000:02:00.0: reg 0x20: [mem 0xf8fe0000-0xf8feffff 64bit pref] [ 0.132023] pci 0000:02:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref] [ 0.132097] pci 0000:02:00.0: supports D1 D2 [ 0.132098] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144016] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.144019] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.144022] pci 0000:00:1c.3: bridge window [mem 0xfea00000-0xfeafffff] [ 0.144026] pci 0000:00:1c.3: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.144065] pci 0000:04:00.0: [14f1:1056] type 00 class 0x078000 [ 0.144079] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff] [ 0.144087] pci 0000:04:00.0: reg 0x14: [io 0xec00-0xec07] [ 0.144149] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.144227] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.144230] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.144233] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.144238] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.144239] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.144241] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.144242] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.144244] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff window] (subtractive decode) [ 0.144902] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.144953] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.145004] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.145055] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.145104] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.145154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.145204] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.145255] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.145308] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.145637] SCSI subsystem initialized [ 0.145649] libata version 3.00 loaded. [ 0.145649] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.145649] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.145649] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.145649] vgaarb: loaded [ 0.145649] ACPI: bus type USB registered [ 0.145649] usbcore: registered new interface driver usbfs [ 0.145649] usbcore: registered new interface driver hub [ 0.145649] usbcore: registered new device driver usb [ 0.145649] PCI: Using ACPI for IRQ routing [ 0.145649] PCI: pci_cache_line_size set to 64 bytes [ 0.145649] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.145649] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff] [ 0.145649] NetLabel: Initializing [ 0.145649] NetLabel: domain hash size = 128 [ 0.145649] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.145649] NetLabel: unlabeled traffic allowed by default [ 0.145649] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.145649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.145649] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.149018] clocksource: Switched to clocksource hpet [ 0.160663] VFS: Disk quotas dquot_6.6.0 [ 0.160701] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.160870] AppArmor: AppArmor Filesystem Enabled [ 0.160956] pnp: PnP ACPI init [ 0.161097] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.161102] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.161192] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.161478] pnp 00:02: [dma 3] [ 0.161583] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.161646] system 00:03: [io 0x0290-0x0297] has been reserved [ 0.161649] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.161762] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.161764] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.161766] system 00:04: [io 0x0480-0x04bf] has been reserved [ 0.161768] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.161769] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.161772] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.161875] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.161878] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.161949] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.161951] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.161953] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.162033] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.162215] pnp 00:08: [dma 0 disabled] [ 0.162275] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.162337] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.162340] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.162504] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.162506] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.162507] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.162509] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.162512] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.162625] pnp: PnP ACPI: found 11 devices [ 0.169271] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.169292] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.169295] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.169297] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.169312] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.169314] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.169316] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.169318] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.169319] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.169321] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.169327] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff] [ 0.169331] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.169333] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.169336] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.169338] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.169341] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.169343] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.169347] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.169349] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.169353] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 0.169355] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.169361] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.169363] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.169366] pci 0000:00:1c.3: bridge window [mem 0xfea00000-0xfeafffff] [ 0.169369] pci 0000:00:1c.3: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.169374] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.169376] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.169380] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.169387] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.169389] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.169390] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.169391] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.169393] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window] [ 0.169394] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.169396] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff] [ 0.169397] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.169398] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.169400] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff] [ 0.169401] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.169402] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.169404] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.169405] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.169406] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.169408] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.169409] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.169410] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.169412] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.169413] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.169414] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff window] [ 0.169483] NET: Registered protocol family 2 [ 0.169767] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.169852] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.169999] TCP: Hash tables configured (established 16384 bind 16384) [ 0.170063] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.170083] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.170141] NET: Registered protocol family 1 [ 0.170742] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.170748] PCI: CLS 32 bytes, default 64 [ 0.170818] Unpacking initramfs... [ 0.898684] Freeing initrd memory: 41696K [ 0.899068] Scanning for low memory corruption every 60 seconds [ 0.899541] audit: initializing netlink subsys (disabled) [ 0.899667] audit: type=2000 audit(1501355077.896:1): initialized [ 0.900053] Initialise system trusted keyrings [ 0.900157] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 0.902114] zbud: loaded [ 0.902637] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.902885] fuse init (API version 7.26) [ 0.904207] Key type asymmetric registered [ 0.904208] Asymmetric key parser 'x509' registered [ 0.904257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.904288] io scheduler noop registered [ 0.904289] io scheduler deadline registered [ 0.904299] io scheduler cfq registered (default) [ 0.904629] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.904948] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.904949] vesafb: scrolling: redraw [ 0.904950] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.904965] vesafb: framebuffer at 0xfb000000, mapped to 0xffffb86ac0800000, using 1216k, total 1216k [ 0.905077] Console: switching to colour frame buffer device 80x30 [ 0.905089] fb0: VESA VGA frame buffer device [ 0.905103] intel_idle: does not run on family 6 model 23 [ 0.905201] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.905205] ACPI: Power Button [PWRB] [ 0.905249] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.905250] ACPI: Power Button [PWRF] [ 0.905426] GHES: HEST is not enabled! [ 0.905509] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.925931] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.927477] Linux agpgart interface v0.103 [ 0.929352] loop: module loaded [ 0.929509] ata_piix 0000:00:1f.1: version 2.13 [ 0.930560] scsi host0: ata_piix [ 0.930664] scsi host1: ata_piix [ 0.930710] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.930712] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.930781] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.931746] scsi host2: ata_piix [ 0.931827] scsi host3: ata_piix [ 0.931869] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 18 [ 0.931870] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 18 [ 0.931983] libphy: Fixed MDIO Bus: probed [ 0.931984] tun: Universal TUN/TAP device driver, 1.6 [ 0.931984] tun: (C) 1999-2004 Max Krasnyansky [ 0.932154] PPP generic driver version 2.4.2 [ 0.932209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.932214] ehci-pci: EHCI PCI platform driver [ 0.932325] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.932332] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.932344] ehci-pci 0000:00:1d.7: debug port 1 [ 0.936243] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.936255] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9ffbc00 [ 0.952019] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.952096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.952099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952102] usb usb1: Product: EHCI Host Controller [ 0.952105] usb usb1: Manufacturer: Linux 4.10.0-28-generic ehci_hcd [ 0.952108] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.952270] hub 1-0:1.0: USB hub found [ 0.952278] hub 1-0:1.0: 8 ports detected [ 0.952481] ehci-platform: EHCI generic platform driver [ 0.952495] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.952498] ohci-pci: OHCI PCI platform driver [ 0.952508] ohci-platform: OHCI generic platform driver [ 0.952517] uhci_hcd: USB Universal Host Controller Interface driver [ 0.952584] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.952589] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.952595] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.952612] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 0.952653] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.952655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952656] usb usb2: Product: UHCI Host Controller [ 0.952657] usb usb2: Manufacturer: Linux 4.10.0-28-generic uhci_hcd [ 0.952659] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.952756] hub 2-0:1.0: USB hub found [ 0.952762] hub 2-0:1.0: 2 ports detected [ 0.952899] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.952904] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.952909] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.952930] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800 [ 0.952972] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.952974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952975] usb usb3: Product: UHCI Host Controller [ 0.952976] usb usb3: Manufacturer: Linux 4.10.0-28-generic uhci_hcd [ 0.952978] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.953073] hub 3-0:1.0: USB hub found [ 0.953078] hub 3-0:1.0: 2 ports detected [ 0.953214] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.953218] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.953224] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.953239] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880 [ 0.953278] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.953280] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.953281] usb usb4: Product: UHCI Host Controller [ 0.953282] usb usb4: Manufacturer: Linux 4.10.0-28-generic uhci_hcd [ 0.953283] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.953381] hub 4-0:1.0: USB hub found [ 0.953387] hub 4-0:1.0: 2 ports detected [ 0.953522] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.953529] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.953534] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.953555] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 [ 0.953606] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.953607] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.953609] usb usb5: Product: UHCI Host Controller [ 0.953610] usb usb5: Manufacturer: Linux 4.10.0-28-generic uhci_hcd [ 0.953611] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.953708] hub 5-0:1.0: USB hub found [ 0.953713] hub 5-0:1.0: 2 ports detected [ 0.953860] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 0.953861] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.956654] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.956658] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.956813] mousedev: PS/2 mouse device common for all mice [ 0.956991] rtc_cmos 00:01: RTC can wake from S4 [ 0.957104] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.957126] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.957133] i2c /dev entries driver [ 0.957204] device-mapper: uevent: version 1.0.3 [ 0.957280] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 0.957304] ledtrig-cpu: registered to indicate activity on CPUs [ 0.957632] NET: Registered protocol family 10 [ 0.961937] Segment Routing with IPv6 [ 0.961961] NET: Registered protocol family 17 [ 0.961976] Key type dns_resolver registered [ 0.962233] microcode: sig=0x1067a, pf=0x1, revision=0xa07 [ 0.962270] microcode: Microcode Update Driver: v2.2. [ 0.962396] registered taskstats version 1 [ 0.962411] Loading compiled-in X.509 certificates [ 0.965331] Loaded X.509 cert 'Build time autogenerated kernel key: 1dbff672f4e4d459849c8aa71c01089bd04bfcdd' [ 0.965362] zswap: loaded using pool lzo/zbud [ 0.977684] Key type big_key registered [ 0.977688] Key type trusted registered [ 0.979959] Key type encrypted registered [ 0.979963] AppArmor: AppArmor sha1 policy hashing enabled [ 0.979967] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.979995] evm: HMAC attrs: 0x1 [ 0.980264] Magic number: 9:714:92 [ 0.980389] container: hash matches [ 0.980438] rtc_cmos 00:01: setting system clock to 2017-07-29 19:04:38 UTC (1501355078) [ 0.980763] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.980764] EDD information not available. [ 0.980804] PM: Hibernation image not present or could not be loaded. [ 1.098583] ata4.00: ATA-8: STM3500418AS, CC38, max UDMA/133 [ 1.098585] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.098589] ata4.01: ATAPI: ASUS DRW-24B1ST, 1.01, max UDMA/100 [ 1.111756] ata4.00: configured for UDMA/133 [ 1.116250] ata4.01: configured for UDMA/100 [ 1.117176] scsi 3:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5 [ 1.148275] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.148284] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.148298] sd 3:0:0:0: [sda] Write Protect is off [ 1.148300] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.148332] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.153155] scsi 3:0:1:0: CD-ROM ASUS DRW-24B1ST 1.01 PQ: 0 ANSI: 5 [ 1.191759] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.191762] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.191969] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 1.192042] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 1.221711] sda: sda1 sda2 < sda5 sda6 sda7 > [ 1.222226] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.224796] Freeing unused kernel memory: 2228K [ 1.224801] Write protecting the kernel read-only data: 14336k [ 1.225693] Freeing unused kernel memory: 1164K [ 1.226517] Freeing unused kernel memory: 272K [ 1.234980] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.247886] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.247988] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.248028] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.248894] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.248936] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.250247] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.250315] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.250708] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.250787] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.250857] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.299082] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.299096] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.299548] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffb86ac0329000, 90:e6:ba:b7:c3:9a, XID 1c4000c0 IRQ 27 [ 1.299549] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 1.304350] [drm] Initialized [ 1.308841] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.328138] wmi: Mapper loaded [ 1.361073] checking generic (fb000000 130000) vs hw (e0000000 10000000) [ 1.361076] checking generic (fb000000 130000) vs hw (fa000000 2000000) [ 1.361077] fb: switching to nouveaufb from VESA VGA [ 1.361123] Console: switching to colour dummy device 80x25 [ 1.361301] nouveau 0000:01:00.0: NVIDIA G96 (096080c1) [ 1.401316] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.480224] nouveau 0000:01:00.0: bios: version 62.94.36.00.00 [ 1.480252] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 1.501331] nouveau 0000:01:00.0: bios: M0203T not found [ 1.501333] nouveau 0000:01:00.0: bios: M0203E not matched! [ 1.501335] nouveau 0000:01:00.0: fb: 1024 MiB DDR2 [ 1.716333] usb 2-1: New USB device found, idVendor=1a2c, idProduct=0c21 [ 1.716335] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.716337] usb 2-1: Product: USB Keyboard [ 1.716339] usb 2-1: Manufacturer: USB [ 1.725029] random: fast init done [ 1.730150] hidraw: raw HID events driver (C) Jiri Kosina [ 1.769062] usbcore: registered new interface driver usbhid [ 1.769065] usbhid: USB HID core driver [ 1.772703] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:1A2C:0C21.0001/input/input5 [ 1.781495] [TTM] Zone kernel: Available graphics memory: 1022830 kiB [ 1.781495] [TTM] Initializing pool allocator [ 1.781501] [TTM] Initializing DMA pool allocator [ 1.781527] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 1.781529] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.781534] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.781535] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.781538] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028 [ 1.781539] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 [ 1.781541] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 [ 1.781542] nouveau 0000:01:00.0: DRM: DCB outp 03: 010223f1 00c0c080 [ 1.781544] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 1.781545] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130 [ 1.781547] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000210 [ 1.781548] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211 [ 1.781549] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213 [ 1.787736] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 1.787738] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 1.787776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.787777] [drm] Driver supports precise vblank timestamp query. [ 1.797939] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.832425] hid-generic 0003:1A2C:0C21.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.0-1/input0 [ 1.832909] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:1A2C:0C21.0002/input/input6 [ 1.892250] hid-generic 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:1d.0-1/input1 [ 1.916021] tsc: Refined TSC clocksource calibration: 2599.999 MHz [ 1.916028] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3b2ad7e, max_idle_ns: 440795282337 ns [ 2.060696] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 2.103200] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x70000, bo ffff96d975358400 [ 2.115506] fbcon: nouveaufb (fb0) is primary device [ 2.115598] Console: switching to colour frame buffer device 128x48 [ 2.115622] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 2.148024] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.267942] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 2.408023] usb 2-2: new full-speed USB device number 3 using uhci_hcd [ 2.581044] usb 2-2: New USB device found, idVendor=0c45, idProduct=608f [ 2.581048] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.581051] usb 2-2: Product: USB camera [ 2.916021] usb 1-5: new high-speed USB device number 4 using ehci-pci [ 2.940100] clocksource: Switched to clocksource tsc [ 3.066299] usb 1-5: New USB device found, idVendor=058f, idProduct=6362 [ 3.066303] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.066306] usb 1-5: Product: Mass Storage Device [ 3.066308] usb 1-5: Manufacturer: Generic [ 3.066311] usb 1-5: SerialNumber: 058F312D81B [ 3.184015] usb 1-8: new high-speed USB device number 5 using ehci-pci [ 3.332923] usb 1-8: New USB device found, idVendor=12d1, idProduct=256a [ 3.332927] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 3.332930] usb 1-8: Product: Y360-U03 [ 3.332932] usb 1-8: Manufacturer: Huawei Incorporated [ 3.332935] usb 1-8: SerialNumber: QSPJ7THQQGFYHEBU [ 3.624096] usb-storage 1-5:1.0: USB Mass Storage device detected [ 3.624256] scsi host4: usb-storage 1-5:1.0 [ 3.624348] usb-storage 1-8:1.0: USB Mass Storage device detected [ 3.624409] scsi host5: usb-storage 1-8:1.0 [ 3.624477] usbcore: registered new interface driver usb-storage [ 3.625971] usbcore: registered new interface driver uas [ 4.636963] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 4.636965] scsi 5:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [ 4.637564] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 4.638187] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 4.638816] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 4.639170] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.639345] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 4.641108] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 4.641320] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 4.641862] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 4.644830] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4.644934] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 4.650209] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 4.650956] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 4.651716] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 8.944003] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.679613] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 9.679746] systemd[1]: Detected architecture x86-64. [ 9.710151] systemd[1]: Set hostname to . [ 10.448922] random: crng init done [ 10.860867] systemd[1]: Reached target Encrypted Volumes. [ 10.861088] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.861209] systemd[1]: Created slice System Slice. [ 10.861297] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 10.861391] systemd[1]: Listening on Journal Audit Socket. [ 10.861426] systemd[1]: Listening on Syslog Socket. [ 10.861437] systemd[1]: Reached target Remote File Systems (Pre). [ 11.695573] lp: driver loaded but no devices found [ 11.804624] ppdev: user-space parallel port driver [ 11.832880] parport_pc 00:02: reported by Plug and Play ACPI [ 11.832974] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 11.932175] lp0: using parport0 (interrupt-driven). [ 12.243480] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.340276] systemd-journald[317]: Received request to flush runtime journal from PID 1 [ 12.601226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.635688] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 12.679769] intel_rng: FWH not detected [ 12.872270] leds_ss4200: no LED devices found [ 13.452519] intel_powerclamp: No package C-state available [ 13.506250] intel_powerclamp: No package C-state available [ 14.049339] media: Linux media interface: v0.10 [ 14.065417] Linux video capture interface: v2.00 [ 14.102730] gspca_main: v2.14.0 registered [ 14.113239] gspca_main: sonixb-2.14.0 probing 0c45:608f [ 14.116170] input: sonixb as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/input/input7 [ 14.116334] usbcore: registered new interface driver sonixb [ 14.146334] usbcore: registered new interface driver snd-usb-audio [ 14.271620] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 14.271623] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.271624] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.271626] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.271627] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 14.271628] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.271630] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 14.271632] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 14.271633] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 14.286224] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.286304] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.286366] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.286434] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.286497] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.286561] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 14.286624] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 14.286688] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 14.882352] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 15.524030] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 15.731645] Adding 4095996k swap on /dev/sda5. Priority:-1 extents:1 across:4095996k FS [ 16.228201] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 17.621410] audit: type=1400 audit(1501355095.135:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=864 comm="apparmor_parser" [ 17.622084] audit: type=1400 audit(1501355095.135:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser" [ 17.622706] audit: type=1400 audit(1501355095.135:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=864 comm="apparmor_parser" [ 17.623266] audit: type=1400 audit(1501355095.135:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser" [ 17.684801] audit: type=1400 audit(1501355095.199:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=863 comm="apparmor_parser" [ 17.685622] audit: type=1400 audit(1501355095.199:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=863 comm="apparmor_parser" [ 18.955898] audit: type=1400 audit(1501355096.467:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=870 comm="apparmor_parser" [ 18.957482] audit: type=1400 audit(1501355096.471:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=870 comm="apparmor_parser" [ 19.185472] audit: type=1400 audit(1501355096.699:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=872 comm="apparmor_parser" [ 19.185902] audit: type=1400 audit(1501355096.699:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=872 comm="apparmor_parser" [ 27.880822] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 27.897341] r8169 0000:02:00.0 enp2s0: link down [ 27.897391] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 29.540327] r8169 0000:02:00.0 enp2s0: link up [ 29.540343] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 35.168350] vboxdrv: loading out-of-tree module taints kernel. [ 35.168692] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 35.174170] vboxdrv: Found 2 processor cores [ 35.181522] vboxdrv: fAsync=0 offMin=0x1ba offMax=0x777 [ 35.281811] vboxdrv: TSC mode is Synchronous, tentative frequency 2599998960 Hz [ 35.281814] vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000) [ 35.425286] VBoxNetFlt: Successfully started. [ 35.456442] VBoxNetAdp: Successfully started. [ 35.464764] VBoxPciLinuxInit [ 35.486156] vboxpci: IOMMU not found (not registered) [ 123.224265] perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 146.618117] perf: interrupt took too long (3177 > 3153), lowering kernel.perf_event_max_sample_rate to 62750 [ 183.227391] perf: interrupt took too long (3983 > 3971), lowering kernel.perf_event_max_sample_rate to 50000 [ 287.112029] usb 1-3: new high-speed USB device number 6 using ehci-pci [ 287.272168] usb 1-3: New USB device found, idVendor=13fe, idProduct=4200 [ 287.272172] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 287.272176] usb 1-3: Product: USB Flash Drive [ 287.272178] usb 1-3: Manufacturer: Philips [ 287.272181] usb 1-3: SerialNumber: 07086279941B9728 [ 287.272582] usb-storage 1-3:1.0: USB Mass Storage device detected [ 287.272733] scsi host6: usb-storage 1-3:1.0 [ 288.287203] scsi 6:0:0:0: Direct-Access Philips USB Flash Drive PMAP PQ: 0 ANSI: 6 [ 288.292811] sd 6:0:0:0: Attached scsi generic sg7 type 0 [ 288.293067] sd 6:0:0:0: [sdg] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 288.293674] sd 6:0:0:0: [sdg] Write Protect is off [ 288.293678] sd 6:0:0:0: [sdg] Mode Sense: 45 00 00 00 [ 288.294332] sd 6:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 292.054128] sdg: sdg1 sdg2 sdg3 [ 292.069696] sd 6:0:0:0: [sdg] Attached SCSI removable disk [ 296.239819] EXT4-fs (sdg2): mounting ext2 file system using the ext4 subsystem [ 296.260932] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 296.337267] EXT4-fs (sdg2): mounted filesystem without journal. Opts: (null) [ 296.381194] perf: interrupt took too long (4981 > 4978), lowering kernel.perf_event_max_sample_rate to 40000 [ 542.050982] usb 1-3: USB disconnect, device number 6 [ 542.140169] FAT-fs (sdg3): unable to read boot sector to mark fs as dirty [ 1191.196036] usb 1-4: new high-speed USB device number 7 using ehci-pci [ 1191.345660] usb 1-4: New USB device found, idVendor=0480, idProduct=0100 [ 1191.345665] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1191.345668] usb 1-4: Product: External USB 3.0 [ 1191.345671] usb 1-4: Manufacturer: TOSHIBA [ 1191.345673] usb 1-4: SerialNumber: 20130908007599F [ 1191.346208] usb-storage 1-4:1.0: USB Mass Storage device detected [ 1191.346413] scsi host6: usb-storage 1-4:1.0 [ 1191.539705] usb 1-4: USB disconnect, device number 7 [ 1191.812035] usb 1-4: new high-speed USB device number 8 using ehci-pci [ 1191.961657] usb 1-4: New USB device found, idVendor=0480, idProduct=0100 [ 1191.961661] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1191.961664] usb 1-4: Product: External USB 3.0 [ 1191.961667] usb 1-4: Manufacturer: TOSHIBA [ 1191.961669] usb 1-4: SerialNumber: 20130908007599F [ 1191.962112] usb-storage 1-4:1.0: USB Mass Storage device detected [ 1191.963730] scsi host6: usb-storage 1-4:1.0 [ 1192.988946] scsi 6:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6 [ 1192.989804] sd 6:0:0:0: Attached scsi generic sg7 type 0 [ 1194.504552] sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1194.505666] sd 6:0:0:0: [sdg] Write Protect is off [ 1194.505670] sd 6:0:0:0: [sdg] Mode Sense: 43 00 00 00 [ 1194.506790] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1194.522682] sdg: sdg1 [ 1194.527920] sd 6:0:0:0: [sdg] Attached SCSI disk [ 1266.843258] perf: interrupt took too long (6239 > 6226), lowering kernel.perf_event_max_sample_rate to 32000 [ 2396.213801] sd 6:0:0:0: [sdg] Synchronizing SCSI cache [ 2396.278336] usb 1-4: USB disconnect, device number 8 [ 3443.991867] usb 1-8: USB disconnect, device number 5 [ 4288.066682] vboxdrv: 0000000000000000 VMMR0.r0 [ 4288.476434] vboxdrv: 0000000000000000 VBoxDDR0.r0 [ 4288.483488] vboxdrv: 0000000000000000 VBoxDD2R0.r0 [ 5443.708977] r8169 0000:02:00.0 enp2s0: link down [ 5759.373845] r8169 0000:02:00.0 enp2s0: link up [ 5771.517971] r8169 0000:02:00.0 enp2s0: link down [ 5773.130578] r8169 0000:02:00.0 enp2s0: link up [ 6104.371446] vboxdrv: 0000000000000000 VMMR0.r0 [ 6104.891861] vboxdrv: 0000000000000000 VBoxDDR0.r0 [ 6104.900851] vboxdrv: 0000000000000000 VBoxDD2R0.r0 [ 8274.516069] usb 1-3: new high-speed USB device number 9 using ehci-pci [ 8274.666061] usb 1-3: New USB device found, idVendor=090c, idProduct=1000 [ 8274.666065] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8274.666066] usb 1-3: Product: Silicon-Power8G [ 8274.666067] usb 1-3: Manufacturer: UFD 2.0 [ 8274.666069] usb 1-3: SerialNumber: 201302SP010907051107 [ 8274.666442] usb-storage 1-3:1.0: USB Mass Storage device detected [ 8274.667166] scsi host5: usb-storage 1-3:1.0 [ 8276.158584] scsi 5:0:0:0: Direct-Access UFD 2.0 Silicon-Power8G 1100 PQ: 0 ANSI: 4 [ 8276.159055] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 8276.161535] sd 5:0:0:0: [sdf] 15455232 512-byte logical blocks: (7.91 GB/7.37 GiB) [ 8276.162284] sd 5:0:0:0: [sdf] Write Protect is off [ 8276.162286] sd 5:0:0:0: [sdf] Mode Sense: 43 00 00 00 [ 8276.164889] sd 5:0:0:0: [sdf] No Caching mode page found [ 8276.164895] sd 5:0:0:0: [sdf] Assuming drive cache: write through [ 8276.174437] sdf: sdf1 [ 8276.177682] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 8293.135358] usb 1-3: USB disconnect, device number 9 [ 8293.244126] FAT-fs (sdf1): unable to read boot sector to mark fs as dirty [ 8302.020030] usb 1-3: new high-speed USB device number 10 using ehci-pci [ 8302.180173] usb 1-3: New USB device found, idVendor=13fe, idProduct=4200 [ 8302.180177] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8302.180179] usb 1-3: Product: USB Flash Drive [ 8302.180181] usb 1-3: Manufacturer: Philips [ 8302.180183] usb 1-3: SerialNumber: 07086279941B9728 [ 8302.181100] usb-storage 1-3:1.0: USB Mass Storage device detected [ 8302.181832] scsi host5: usb-storage 1-3:1.0 [ 8303.203213] scsi 5:0:0:0: Direct-Access Philips USB Flash Drive PMAP PQ: 0 ANSI: 6 [ 8303.203855] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 8303.208825] sd 5:0:0:0: [sdf] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 8303.210566] sd 5:0:0:0: [sdf] Write Protect is off [ 8303.210569] sd 5:0:0:0: [sdf] Mode Sense: 45 00 00 00 [ 8303.213254] sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8303.408964] sdf: sdf1 sdf2 sdf3 [ 8303.415298] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 8303.915707] EXT4-fs (sdf2): mounting ext2 file system using the ext4 subsystem [ 8303.925236] EXT4-fs (sdf2): warning: mounting unchecked fs, running e2fsck is recommended [ 8303.943035] EXT4-fs (sdf2): mounted filesystem without journal. Opts: (null) [ 8307.524198] FAT-fs (sdf3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8307.796957] FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8748.437672] vboxdrv: 0000000000000000 VMMR0.r0 [ 8809.008672] vboxdrv: 0000000000000000 VMMR0.r0 [ 8824.405701] vboxdrv: 0000000000000000 VMMR0.r0 [ 8824.753238] vboxdrv: 0000000000000000 VBoxDDR0.r0 [ 8824.759013] vboxdrv: 0000000000000000 VBoxDD2R0.r0 [ 9072.224092] usb 1-3: USB disconnect, device number 10 [ 9073.816058] usb 1-3: new high-speed USB device number 11 using ehci-pci [ 9073.976359] usb 1-3: New USB device found, idVendor=13fe, idProduct=4200 [ 9073.976364] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9073.976367] usb 1-3: Product: USB Flash Drive [ 9073.976370] usb 1-3: Manufacturer: Philips [ 9073.976373] usb 1-3: SerialNumber: 07086279941B9728 [ 9073.976791] usb-storage 1-3:1.0: USB Mass Storage device detected [ 9073.977018] scsi host5: usb-storage 1-3:1.0 [ 9075.008532] scsi 5:0:0:0: Direct-Access Philips USB Flash Drive PMAP PQ: 0 ANSI: 6 [ 9075.010627] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 9075.012279] sd 5:0:0:0: [sdf] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 9075.014070] sd 5:0:0:0: [sdf] Write Protect is off [ 9075.014074] sd 5:0:0:0: [sdf] Mode Sense: 45 00 00 00 [ 9075.014877] sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9075.221150] sdf: sdf1 sdf2 sdf3 [ 9075.226236] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 9077.649721] FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9077.720890] EXT4-fs (sdf2): mounting ext2 file system using the ext4 subsystem [ 9077.727759] EXT4-fs (sdf2): warning: mounting unchecked fs, running e2fsck is recommended [ 9077.742833] EXT4-fs (sdf2): mounted filesystem without journal. Opts: (null) [ 9081.292075] FAT-fs (sdf3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9112.791693] usb 1-3: USB disconnect, device number 11 [ 9112.808109] sd 5:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 9112.808116] sd 5:0:0:0: [sdf] tag#0 CDB: Write(10) 2a 00 00 03 28 00 00 00 08 00 [ 9112.808120] blk_update_request: I/O error, dev sdf, sector 206848 [ 9112.808128] Buffer I/O error on dev sdf2, logical block 0, lost sync page write [ 9112.808249] VFS: Dirty inode writeback failed for block device sdf2 (err=-5). [ 9189.405126] UDF-fs: INFO Mounting volume 'hendese tahlil', timestamp 2015/09/16 07:59 (1000) [ 9371.252087] usb 1-3: new high-speed USB device number 12 using ehci-pci [ 9371.412375] usb 1-3: New USB device found, idVendor=13fe, idProduct=4200 [ 9371.412378] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9371.412380] usb 1-3: Product: USB Flash Drive [ 9371.412382] usb 1-3: Manufacturer: Philips [ 9371.412383] usb 1-3: SerialNumber: 07086279941B9728 [ 9371.412769] usb-storage 1-3:1.0: USB Mass Storage device detected [ 9371.412955] scsi host5: usb-storage 1-3:1.0 [ 9372.447252] scsi 5:0:0:0: Direct-Access Philips USB Flash Drive PMAP PQ: 0 ANSI: 6 [ 9372.448754] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 9372.452215] sd 5:0:0:0: [sdf] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 9372.453329] sd 5:0:0:0: [sdf] Write Protect is off [ 9372.453332] sd 5:0:0:0: [sdf] Mode Sense: 45 00 00 00 [ 9372.455011] sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9375.454555] sdf: sdf1 sdf2 sdf3 [ 9375.459037] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 9456.780566] usb 1-3: USB disconnect, device number 12 [ 9458.544035] usb 1-8: new high-speed USB device number 13 using ehci-pci [ 9458.708264] usb 1-8: New USB device found, idVendor=13fe, idProduct=4200 [ 9458.708268] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9458.708271] usb 1-8: Product: USB Flash Drive [ 9458.708274] usb 1-8: Manufacturer: Philips [ 9458.708277] usb 1-8: SerialNumber: 07086279941B9728 [ 9458.708689] usb-storage 1-8:1.0: USB Mass Storage device detected [ 9458.710004] scsi host5: usb-storage 1-8:1.0 [ 9459.743161] scsi 5:0:0:0: Direct-Access Philips USB Flash Drive PMAP PQ: 0 ANSI: 6 [ 9459.745438] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 9459.750404] sd 5:0:0:0: [sdf] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 9459.751890] sd 5:0:0:0: [sdf] Write Protect is off [ 9459.751895] sd 5:0:0:0: [sdf] Mode Sense: 45 00 00 00 [ 9459.753653] sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9459.963816] sdf: sdf1 sdf2 sdf3 [ 9459.971800] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 9460.604517] EXT4-fs (sdf2): mounting ext2 file system using the ext4 subsystem [ 9460.608670] EXT4-fs (sdf2): warning: mounting unchecked fs, running e2fsck is recommended [ 9460.626272] FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9460.640783] FAT-fs (sdf3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9460.653599] EXT4-fs (sdf2): mounted filesystem without journal. Opts: (null) [ 9740.014325] usb 1-8: USB disconnect, device number 13 [10109.721408] vboxdrv: 0000000000000000 VMMR0.r0 [10110.169390] vboxdrv: 0000000000000000 VBoxDDR0.r0 [10110.180203] vboxdrv: 0000000000000000 VBoxDD2R0.r0 [10271.063651] vboxdrv: 0000000000000000 VMMR0.r0 [10298.430983] vboxdrv: 0000000000000000 VMMR0.r0 [10332.965718] vboxdrv: 0000000000000000 VMMR0.r0 [10341.524908] vboxdrv: 0000000000000000 VMMR0.r0