[ 0.000000] microcode: microcode updated early to revision 0x2a, date = 2018-01-18 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e9 with crng_init=0 [ 0.000000] Linux version 4.13.0-41-generic (buildd@lcy01-amd64-012) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #46-Ubuntu SMP Wed May 2 13:38:30 UTC 2018 (Ubuntu 4.13.0-41.46-generic 4.13.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-41-generic root=UUID=94718cde-02bd-40cb-baab-db57e87057a5 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ab7efff] usable [ 0.000000] BIOS-e820: [mem 0x000000008ab7f000-0x000000008be7efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008be7f000-0x000000008bf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008bf7f000-0x000000008bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008bfff000-0x000000008bffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008c000000-0x00000000ae7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004507fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 430 G2/2246, BIOS M73 Ver. 01.42 09/26/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x450800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0088000000 mask 7FFC000000 write-back [ 0.000000] 4 base 008C000000 mask 7FFE000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back [ 0.000000] 7 base 0400000000 mask 7FC0000000 write-back [ 0.000000] 8 base 0440000000 mask 7FF0000000 write-back [ 0.000000] 9 base 0450000000 mask 7FFF800000 write-back [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x8c000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff966440097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1032e000, 0x1032efff] PGTABLE [ 0.000000] BRK [0x1032f000, 0x1032ffff] PGTABLE [ 0.000000] BRK [0x10330000, 0x10330fff] PGTABLE [ 0.000000] BRK [0x10331000, 0x10331fff] PGTABLE [ 0.000000] BRK [0x10332000, 0x10332fff] PGTABLE [ 0.000000] BRK [0x10333000, 0x10333fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31ea3000-0x34f48fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FC2A0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x000000008BFFD0E8 00009C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000008BFFB000 00010C (v05 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: DSDT 0x000000008BFD0000 025642 (v02 HPQOEM 2246 00000001 INTL 20130927) [ 0.000000] ACPI: FACS 0x000000008BF76000 000040 [ 0.000000] ACPI: HPET 0x000000008BFFA000 000038 (v01 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x000000008BFF9000 0000BC (v01 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x000000008BFF8000 00003C (v01 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 0x000000008BFF7000 0000A5 (v32 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x000000008BFF6000 000032 (v02 HPQOEM 2246 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x000000008BFCD000 0003D4 (v01 HPQOEM SataAhci 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x000000008BFCC000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: FPDT 0x000000008BFCA000 000044 (v01 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x000000008BFC9000 000038 (v00 HPQOEM 2246 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x000000008BFC5000 00041E (v01 Isct IsctAsl 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x000000008BFC4000 000544 (v02 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x000000008BFC3000 000B8F (v02 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x000000008BFC2000 0001D5 (v02 PmRef LakeTiny 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x000000008BFC1000 00092C (v02 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004507fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4507d3000-0x4507fdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000004507fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000008ab7efff] [ 0.000000] node 0: [mem 0x000000008bfff000-0x000000008bffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000004507fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004507fffff] [ 0.000000] On node 0 totalpages: 4043548 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8814 pages used for memmap [ 0.000000] DMA32 zone: 564096 pages, LIFO batch:31 [ 0.000000] Normal zone: 54304 pages used for memmap [ 0.000000] Normal zone: 3475456 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000008e800000-0x00000000ae7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8ab7f000-0x8be7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x8be7f000-0x8bf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x8bf7f000-0x8bffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0xae7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xae800000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff966890400000 s146584 r8192 d29544 u262144 [ 0.000000] pcpu-alloc: s146584 r8192 d29544 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3980345 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-41-generic root=UUID=94718cde-02bd-40cb-baab-db57e87057a5 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 15774780K/16174192K available (12300K kernel code, 2482K rwdata, 4000K rodata, 2376K init, 2372K bss, 399412K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37850 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2194.676 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.35 BogoMIPS (lpj=8778704) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.017551] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.017577] Security Framework initialized [ 0.017578] Yama: becoming mindful. [ 0.017599] AppArmor: AppArmor initialized [ 0.020276] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.021618] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.021669] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021713] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021924] CPU: Physical Processor ID: 0 [ 0.021925] CPU: Processor Core ID: 0 [ 0.021930] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.021931] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.021932] FEATURE SPEC_CTRL Present [ 0.021936] mce: CPU supports 7 MCE banks [ 0.021945] CPU0: Thermal monitoring enabled (TM1) [ 0.021957] process: using mwait in idle threads [ 0.021959] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.021960] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.021962] Spectre V2 mitigation: Mitigation: Full generic retpoline [ 0.021962] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported [ 0.021963] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled [ 0.022074] Freeing SMP alternatives memory: 36K [ 0.023428] smpboot: Max logical packages: 4 [ 0.023555] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.024202] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063897] TSC deadline timer enabled [ 0.063899] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.063967] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.064000] ... version: 3 [ 0.064000] ... bit width: 48 [ 0.064000] ... generic registers: 4 [ 0.064000] ... value mask: 0000ffffffffffff [ 0.064000] ... max period: 00007fffffffffff [ 0.064000] ... fixed-purpose events: 3 [ 0.064000] ... event mask: 000000070000000f [ 0.064000] Hierarchical SRCU implementation. [ 0.064000] smp: Bringing up secondary CPUs ... [ 0.064000] x86: Booting SMP configuration: [ 0.064000] .... node #0, CPUs: #1 [ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.064000] #2 #3 [ 0.064948] smp: Brought up 1 node, 4 CPUs [ 0.064948] smpboot: Total of 4 processors activated (17557.40 BogoMIPS) [ 0.068421] devtmpfs: initialized [ 0.068421] x86/mm: Memory block size: 128MB [ 0.069255] evm: security.selinux [ 0.069256] evm: security.SMACK64 [ 0.069257] evm: security.SMACK64EXEC [ 0.069257] evm: security.SMACK64TRANSMUTE [ 0.069258] evm: security.SMACK64MMAP [ 0.069259] evm: security.ima [ 0.069259] evm: security.capability [ 0.069273] PM: Registering ACPI NVS region [mem 0x8be7f000-0x8bf7efff] (1048576 bytes) [ 0.069273] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.069273] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.069273] pinctrl core: initialized pinctrl subsystem [ 0.069273] RTC time: 13:15:43, date: 05/27/18 [ 0.069477] NET: Registered protocol family 16 [ 0.069657] cpuidle: using governor ladder [ 0.069657] cpuidle: using governor menu [ 0.069657] PCCT header not found. [ 0.069657] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.069657] ACPI: bus type PCI registered [ 0.069657] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.069657] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.069657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.069657] PCI: Using configuration type 1 for base access [ 0.072013] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.072013] mtrr: probably your BIOS does not setup all CPUs. [ 0.072014] mtrr: corrected configuration. [ 0.073012] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.073012] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.073012] ACPI: Added _OSI(Module Device) [ 0.073012] ACPI: Added _OSI(Processor Device) [ 0.073012] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073012] ACPI: Added _OSI(Processor Aggregator Device) [ 0.080019] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.084000] ACPI: Dynamic OEM Table Load: [ 0.084000] ACPI: SSDT 0xFFFF96687E2D3000 0003F3 (v02 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.084010] ACPI: Dynamic OEM Table Load: [ 0.084016] ACPI: SSDT 0xFFFF96687E0BE000 0005DB (v02 PmRef ApIst 00003000 INTL 20130927) [ 0.084463] ACPI: Dynamic OEM Table Load: [ 0.084468] ACPI: SSDT 0xFFFF96687E297400 000119 (v02 PmRef ApCst 00003000 INTL 20130927) [ 0.085436] ACPI: EC: EC started [ 0.085436] ACPI: EC: interrupt blocked [ 3.233153] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 3.233155] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.233157] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 3.233157] ACPI: Interpreter enabled [ 3.233188] ACPI: (supports S0 S3 S4 S5) [ 3.233189] ACPI: Using IOAPIC for interrupt routing [ 3.233210] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.233500] ACPI: Enabled 7 GPEs in block 00 to 7F [ 3.235386] ACPI: Power Resource [APPR] (off) [ 3.237741] ACPI: Power Resource [COMP] (on) [ 3.238025] ACPI: Power Resource [LPP] (on) [ 3.238703] ACPI: Power Resource [PXP2] (on) [ 3.356396] ACPI: Power Resource [WRST] (on) [ 3.359330] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 3.359336] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.361207] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.361208] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.361740] PCI host bridge to bus 0000:00 [ 3.361743] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.361744] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.361746] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.361747] pci_bus 0000:00: root bus resource [mem 0xae800000-0xdfffffff window] [ 3.361749] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window] [ 3.361750] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window] [ 3.361752] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 3.361754] pci_bus 0000:00: root bus resource [bus 00-fe] [ 3.361763] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 3.361892] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 3.361905] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 3.361912] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 3.361916] pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f] [ 3.362051] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 3.362062] pci 0000:00:03.0: reg 0x10: [mem 0xc1410000-0xc1413fff 64bit] [ 3.362209] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 3.362226] pci 0000:00:14.0: reg 0x10: [mem 0xc1400000-0xc140ffff 64bit] [ 3.362279] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.362379] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 3.362401] pci 0000:00:16.0: reg 0x10: [mem 0xc141b000-0xc141b01f 64bit] [ 3.362473] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 3.362577] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 3.362596] pci 0000:00:1b.0: reg 0x10: [mem 0xc1414000-0xc1417fff 64bit] [ 3.362656] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 3.362755] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 3.362827] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.362961] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400 [ 3.363036] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 3.363168] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 3.363242] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 3.363374] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 3.363449] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 3.363585] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 3.363606] pci 0000:00:1d.0: reg 0x10: [mem 0xc1419000-0xc14193ff] [ 3.363695] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 3.363799] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 3.364014] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 3.364030] pci 0000:00:1f.2: reg 0x10: [io 0x7088-0x708f] [ 3.364037] pci 0000:00:1f.2: reg 0x14: [io 0x7094-0x7097] [ 3.364043] pci 0000:00:1f.2: reg 0x18: [io 0x7080-0x7087] [ 3.364050] pci 0000:00:1f.2: reg 0x1c: [io 0x7090-0x7093] [ 3.364057] pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f] [ 3.364063] pci 0000:00:1f.2: reg 0x24: [mem 0xc1418000-0xc14187ff] [ 3.364102] pci 0000:00:1f.2: PME# supported from D3hot [ 3.364234] pci 0000:00:1c.0: PCI bridge to [bus 01-06] [ 3.364238] pci 0000:00:1c.0: bridge window [mem 0xc1300000-0xc13fffff] [ 3.364291] pci 0000:07:00.0: [10ec:5227] type 00 class 0xff0000 [ 3.364320] pci 0000:07:00.0: reg 0x10: [mem 0xc1200000-0xc1200fff] [ 3.364460] pci 0000:07:00.0: supports D1 D2 [ 3.364461] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.376027] pci 0000:00:1c.1: PCI bridge to [bus 07] [ 3.376030] pci 0000:00:1c.1: bridge window [io 0x5000-0x6fff] [ 3.376033] pci 0000:00:1c.1: bridge window [mem 0xc1200000-0xc12fffff] [ 3.376097] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000 [ 3.376127] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff] [ 3.376155] pci 0000:08:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit] [ 3.376172] pci 0000:08:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit] [ 3.376276] pci 0000:08:00.0: supports D1 D2 [ 3.376278] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.388026] pci 0000:00:1c.2: PCI bridge to [bus 08] [ 3.388029] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 3.388032] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff] [ 3.388142] pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000 [ 3.388175] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff] [ 3.388206] pci 0000:09:00.0: reg 0x18: [mem 0xc1000000-0xc1003fff 64bit] [ 3.388328] pci 0000:09:00.0: supports D1 D2 [ 3.388330] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.400072] pci 0000:00:1c.3: PCI bridge to [bus 09] [ 3.400075] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 3.400078] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff] [ 3.401042] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 3.401090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 3.401135] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 3.401180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 3.401225] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 3.401272] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 3.401317] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.401362] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 3.401781] ACPI: EC: interrupt unblocked [ 3.401789] ACPI: EC: event unblocked [ 3.401795] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.401797] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 3.402020] SCSI subsystem initialized [ 3.402032] libata version 3.00 loaded. [ 3.402032] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 3.402032] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.402032] pci 0000:00:02.0: vgaarb: bridge control possible [ 3.402032] vgaarb: loaded [ 3.402032] ACPI: bus type USB registered [ 3.402032] usbcore: registered new interface driver usbfs [ 3.402032] usbcore: registered new interface driver hub [ 3.402032] usbcore: registered new device driver usb [ 3.402032] EDAC MC: Ver: 3.0.0 [ 3.402032] PCI: Using ACPI for IRQ routing [ 3.407818] PCI: pci_cache_line_size set to 64 bytes [ 3.407948] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 3.407949] e820: reserve RAM buffer [mem 0x8ab7f000-0x8bffffff] [ 3.407950] e820: reserve RAM buffer [mem 0x450800000-0x453ffffff] [ 3.408039] NetLabel: Initializing [ 3.408039] NetLabel: domain hash size = 128 [ 3.408040] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.408056] NetLabel: unlabeled traffic allowed by default [ 3.408070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.408070] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.410074] clocksource: Switched to clocksource hpet [ 3.418491] VFS: Disk quotas dquot_6.6.0 [ 3.418510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.418613] AppArmor: AppArmor Filesystem Enabled [ 3.418659] pnp: PnP ACPI init [ 3.418886] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.418888] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 3.418890] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 3.418892] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 3.418893] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved [ 3.418895] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 3.418897] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.418899] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 3.418900] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.418902] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 3.418904] system 00:00: [mem 0xae810000-0xae81ffff] has been reserved [ 3.418905] system 00:00: [mem 0xae800000-0xae80ffff] has been reserved [ 3.418910] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.419107] system 00:01: [io 0x0200-0x020f] has been reserved [ 3.419109] system 00:01: [io 0x0220-0x027f] has been reserved [ 3.419111] system 00:01: [io 0xffff] has been reserved [ 3.419115] system 00:01: [io 0xffff] has been reserved [ 3.419117] system 00:01: [io 0xffff] has been reserved [ 3.419118] system 00:01: [io 0x1800-0x18fe] has been reserved [ 3.419120] system 00:01: [io 0xef80-0xef9f] has been reserved [ 3.419124] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.419171] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.419303] pnp 00:03: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 3.419325] pnp 00:04: Plug and Play ACPI device, IDs SYN3020 SYN0100 SYN0002 PNP0f13 (active) [ 3.419847] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 3.419893] pnp: PnP ACPI: found 6 devices [ 3.425969] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.425988] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 3.426008] pci 0000:00:1c.1: BAR 15: assigned [mem 0xae900000-0xaeafffff 64bit pref] [ 3.426011] pci 0000:00:1c.0: PCI bridge to [bus 01-06] [ 3.426015] pci 0000:00:1c.0: bridge window [mem 0xc1300000-0xc13fffff] [ 3.426022] pci 0000:00:1c.1: PCI bridge to [bus 07] [ 3.426024] pci 0000:00:1c.1: bridge window [io 0x5000-0x6fff] [ 3.426028] pci 0000:00:1c.1: bridge window [mem 0xc1200000-0xc12fffff] [ 3.426031] pci 0000:00:1c.1: bridge window [mem 0xae900000-0xaeafffff 64bit pref] [ 3.426037] pci 0000:00:1c.2: PCI bridge to [bus 08] [ 3.426039] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 3.426043] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff] [ 3.426049] pci 0000:00:1c.3: PCI bridge to [bus 09] [ 3.426051] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 3.426055] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff] [ 3.426063] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.426065] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.426066] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.426068] pci_bus 0000:00: resource 7 [mem 0xae800000-0xdfffffff window] [ 3.426069] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window] [ 3.426071] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window] [ 3.426073] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window] [ 3.426074] pci_bus 0000:01: resource 1 [mem 0xc1300000-0xc13fffff] [ 3.426076] pci_bus 0000:07: resource 0 [io 0x5000-0x6fff] [ 3.426077] pci_bus 0000:07: resource 1 [mem 0xc1200000-0xc12fffff] [ 3.426079] pci_bus 0000:07: resource 2 [mem 0xae900000-0xaeafffff 64bit pref] [ 3.426081] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff] [ 3.426082] pci_bus 0000:08: resource 1 [mem 0xc1100000-0xc11fffff] [ 3.426084] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff] [ 3.426085] pci_bus 0000:09: resource 1 [mem 0xc1000000-0xc10fffff] [ 3.426189] NET: Registered protocol family 2 [ 3.426377] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.426572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.426685] TCP: Hash tables configured (established 131072 bind 65536) [ 3.426730] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 3.426773] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 3.426849] NET: Registered protocol family 1 [ 3.426865] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.426872] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 3.427392] PCI: CLS 64 bytes, default 64 [ 3.427429] Unpacking initramfs... [ 4.255934] Freeing initrd memory: 49816K [ 4.255940] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.255943] software IO TLB [mem 0x86b7f000-0x8ab7f000] (64MB) mapped at [ffff9664c6b7f000-ffff9664cab7efff] [ 4.256036] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than Reserved [mem 0xfed10000-0xfed13fff] [ 4.256041] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs [ 4.256182] Scanning for low memory corruption every 60 seconds [ 4.256472] audit: initializing netlink subsys (disabled) [ 4.256511] audit: type=2000 audit(1527426947.256:1): state=initialized audit_enabled=0 res=1 [ 4.256879] Initialise system trusted keyrings [ 4.256888] Key type blacklist registered [ 4.256921] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 4.258068] zbud: loaded [ 4.258596] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.258720] fuse init (API version 7.26) [ 4.259979] Key type asymmetric registered [ 4.259980] Asymmetric key parser 'x509' registered [ 4.260029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 4.260062] io scheduler noop registered [ 4.260063] io scheduler deadline registered [ 4.260089] io scheduler cfq registered (default) [ 4.260943] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 4.260966] pcieport 0000:00:1c.1: Signaling PME with IRQ 41 [ 4.260981] pcieport 0000:00:1c.2: Signaling PME with IRQ 42 [ 4.260997] pcieport 0000:00:1c.3: Signaling PME with IRQ 43 [ 4.261014] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 4.261096] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 4.261096] vesafb: scrolling: redraw [ 4.261098] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.261107] vesafb: framebuffer at 0xb0000000, mapped to 0xffffbd8b42800000, using 4160k, total 4160k [ 4.261183] Console: switching to colour frame buffer device 170x48 [ 4.261201] fb0: VESA VGA frame buffer device [ 4.261215] intel_idle: MWAIT substates: 0x11142120 [ 4.261216] intel_idle: v0.4.1 model 0x3D [ 4.261392] intel_idle: lapic_timer_reliable_states 0xffffffff [ 4.261573] ACPI: AC Adapter [AC] (on-line) [ 4.261632] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 4.261640] ACPI: Sleep Button [SLPB] [ 4.261696] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 4.261721] ACPI: Lid Switch [LID] [ 4.261753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.261773] ACPI: Power Button [PWRF] [ 4.280935] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.285979] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.285981] ACPI: Thermal Zone [CPUZ] (47 C) [ 4.310357] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.310359] ACPI: Thermal Zone [GFXZ] (0 C) [ 4.325574] thermal LNXTHERM:02: registered as thermal_zone2 [ 4.325575] ACPI: Thermal Zone [EXTZ] (0 C) [ 4.340846] thermal LNXTHERM:03: registered as thermal_zone3 [ 4.340848] ACPI: Thermal Zone [LOCZ] (0 C) [ 4.356132] thermal LNXTHERM:04: registered as thermal_zone4 [ 4.356134] ACPI: Thermal Zone [BATZ] (28 C) [ 4.356461] thermal LNXTHERM:05: registered as thermal_zone5 [ 4.356462] ACPI: Thermal Zone [PCHZ] (84 C) [ 4.356510] GHES: HEST is not enabled! [ 4.356625] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.357995] Linux agpgart interface v0.103 [ 4.375662] ACPI: Battery Slot [BAT0] (battery present) [ 4.436099] tpm_tis 00:05: 1.2 TPM (device-id 0x1A, rev-id 16) [ 4.804101] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 4.804106] tpm tpm0: TPM is disabled/deactivated (0x7) [ 4.806561] loop: module loaded [ 4.806729] libphy: Fixed MDIO Bus: probed [ 4.806730] tun: Universal TUN/TAP device driver, 1.6 [ 4.806763] PPP generic driver version 2.4.2 [ 4.806801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.806803] ehci-pci: EHCI PCI platform driver [ 4.806955] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.806961] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.806972] ehci-pci 0000:00:1d.0: debug port 2 [ 4.810867] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.810880] ehci-pci 0000:00:1d.0: irq 17, io mem 0xc1419000 [ 4.824015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.824055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.824057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.824058] usb usb1: Product: EHCI Host Controller [ 4.824060] usb usb1: Manufacturer: Linux 4.13.0-41-generic ehci_hcd [ 4.824061] usb usb1: SerialNumber: 0000:00:1d.0 [ 4.824163] hub 1-0:1.0: USB hub found [ 4.824167] hub 1-0:1.0: 2 ports detected [ 4.824289] ehci-platform: EHCI generic platform driver [ 4.824298] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.824301] ohci-pci: OHCI PCI platform driver [ 4.824308] ohci-platform: OHCI generic platform driver [ 4.824314] uhci_hcd: USB Universal Host Controller Interface driver [ 4.824449] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.824457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.825520] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 4.825524] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.825594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.825596] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.825597] usb usb2: Product: xHCI Host Controller [ 4.825599] usb usb2: Manufacturer: Linux 4.13.0-41-generic xhci-hcd [ 4.825600] usb usb2: SerialNumber: 0000:00:14.0 [ 4.825692] hub 2-0:1.0: USB hub found [ 4.825703] hub 2-0:1.0: 11 ports detected [ 4.826158] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.826162] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.826189] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.826190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.826192] usb usb3: Product: xHCI Host Controller [ 4.826193] usb usb3: Manufacturer: Linux 4.13.0-41-generic xhci-hcd [ 4.826195] usb usb3: SerialNumber: 0000:00:14.0 [ 4.826282] hub 3-0:1.0: USB hub found [ 4.826289] hub 3-0:1.0: 4 ports detected [ 4.826428] usb: port power management may be unreliable [ 4.826507] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.827691] i8042: Detected active multiplexing controller, rev 1.1 [ 4.828286] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.828290] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.828314] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.828333] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.828352] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.828452] mousedev: PS/2 mouse device common for all mice [ 4.828589] rtc_cmos 00:02: RTC can wake from S4 [ 4.828710] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.828734] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.828739] i2c /dev entries driver [ 4.828782] device-mapper: uevent: version 1.0.3 [ 4.828837] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 4.828845] intel_pstate: Intel P-state driver initializing [ 4.829071] ledtrig-cpu: registered to indicate activity on CPUs [ 4.829459] NET: Registered protocol family 10 [ 4.833223] Segment Routing with IPv6 [ 4.833249] NET: Registered protocol family 17 [ 4.833255] Key type dns_resolver registered [ 4.833538] RAS: Correctable Errors collector initialized. [ 4.833573] microcode: sig=0x306d4, pf=0x40, revision=0x2a [ 4.833643] microcode: Microcode Update Driver: v2.2. [ 4.833691] sched_clock: Marking stable (4833639880, 0)->(4839234365, -5594485) [ 4.833853] registered taskstats version 1 [ 4.833860] Loading compiled-in X.509 certificates [ 4.836085] Loaded X.509 cert 'Build time autogenerated kernel key: 893fe0185f98dff2b1f419f2de3271103f7b83c6' [ 4.836101] zswap: loaded using pool lzo/zbud [ 4.839225] Key type big_key registered [ 4.839228] Key type trusted registered [ 4.840826] Key type encrypted registered [ 4.840828] AppArmor: AppArmor sha1 policy hashing enabled [ 4.854053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.904102] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 4.904106] ima: No TPM chip found, activating TPM-bypass! (rc=7) [ 4.904134] evm: HMAC attrs: 0x1 [ 4.904639] Magic number: 2:122:282 [ 4.904681] tty tty19: hash matches [ 4.904779] rtc_cmos 00:02: setting system clock to 2018-05-27 13:15:48 UTC (1527426948) [ 4.904933] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.904934] EDD information not available. [ 4.904972] PM: Hibernation image not present or could not be loaded. [ 4.906896] Freeing unused kernel memory: 2376K [ 4.906897] Write protecting the kernel read-only data: 18432k [ 4.907357] Freeing unused kernel memory: 2024K [ 4.907557] Freeing unused kernel memory: 96K [ 4.908942] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.908942] x86/mm: Checking user space page tables [ 4.910194] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.022838] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.022848] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control [ 5.022909] ahci 0000:00:1f.2: version 3.0 [ 5.033023] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffbd8b40035000, 30:8d:99:6b:87:2e, XID 10900800 IRQ 47 [ 5.033026] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.033753] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 5.033757] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 5.033870] r8169 0000:08:00.0 enp8s0: renamed from eth0 [ 5.034277] scsi host0: ahci [ 5.034358] scsi host1: ahci [ 5.034432] scsi host2: ahci [ 5.034494] scsi host3: ahci [ 5.034524] ata1: SATA max UDMA/133 abar m2048@0xc1418000 port 0xc1418100 irq 45 [ 5.034525] ata2: DUMMY [ 5.034526] ata3: DUMMY [ 5.034526] ata4: DUMMY [ 5.059505] [drm] Memory usable by graphics device = 4096M [ 5.059507] checking generic (b0000000 410000) vs hw (b0000000 10000000) [ 5.059508] fb: switching to inteldrmfb from VESA VGA [ 5.059528] Console: switching to colour dummy device 80x25 [ 5.059603] [drm] Replacing VGA console driver [ 5.059632] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead [ 5.065643] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.065644] [drm] Driver supports precise vblank timestamp query. [ 5.068183] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.077986] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 5.079113] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.081366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 5.114555] fbcon: inteldrmfb (fb0) is primary device [ 5.114625] Console: switching to colour frame buffer device 170x48 [ 5.114650] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.152132] usb 2-1: new full-speed USB device number 2 using xhci_hcd [ 5.160132] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.276107] tsc: Refined TSC clocksource calibration: 2194.918 MHz [ 5.276118] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns [ 5.294475] usb 2-1: New USB device found, idVendor=046d, idProduct=c52f [ 5.294477] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.294478] usb 2-1: Product: USB Receiver [ 5.294480] usb 2-1: Manufacturer: Logitech [ 5.308524] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 5.308526] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.308886] hub 1-1:1.0: USB hub found [ 5.308972] hub 1-1:1.0: 8 ports detected [ 5.347735] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.348441] ata1.00: ATA-9: WDC WD5000LPVX-60V0TT0, 01.01A01, max UDMA/133 [ 5.348444] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.349214] ata1.00: configured for UDMA/133 [ 5.349464] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-6 1A01 PQ: 0 ANSI: 5 [ 5.388270] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.388343] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.388346] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 5.388363] sd 0:0:0:0: [sda] Write Protect is off [ 5.388367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.388423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.412067] usb 2-4: new full-speed USB device number 3 using xhci_hcd [ 5.427335] sda: sda1 sda2 < sda5 > [ 5.427954] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.553346] usb 2-4: New USB device found, idVendor=0bda, idProduct=b001 [ 5.553348] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.553350] usb 2-4: Product: Bluetooth Radio [ 5.553351] usb 2-4: Manufacturer: Realtek [ 5.553353] usb 2-4: SerialNumber: 00e04c000001 [ 5.672094] usb 2-5: new full-speed USB device number 4 using xhci_hcd [ 5.752191] psmouse serio3: synaptics: queried max coordinates: x [..5742], y [..5004] [ 5.784799] psmouse serio3: synaptics: queried min coordinates: x [1198..], y [972..] [ 5.813344] usb 2-5: New USB device found, idVendor=138a, idProduct=003f [ 5.813346] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 5.813348] usb 2-5: SerialNumber: 00a0d8f51180 [ 5.842755] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2653, fw id: 1481159 [ 5.879351] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10 [ 5.932147] usb 2-7: new high-speed USB device number 5 using xhci_hcd [ 6.111060] usb 2-7: New USB device found, idVendor=04f2, idProduct=b477 [ 6.111062] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 6.111064] usb 2-7: Product: HP HD Webcam [ 6.111065] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd. [ 6.111067] usb 2-7: SerialNumber: 200901010001 [ 6.115825] hidraw: raw HID events driver (C) Jiri Kosina [ 6.119097] usbcore: registered new interface driver usbhid [ 6.119099] usbhid: USB HID core driver [ 6.120727] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C52F.0001/input/input13 [ 6.120837] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0 [ 6.121014] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52F.0002/input/input14 [ 6.180438] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1 [ 6.300297] clocksource: Switched to clocksource tsc [ 6.360686] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.587084] random: crng init done [ 8.135297] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.248198] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 8.268182] systemd[1]: Detected architecture x86-64. [ 8.289670] systemd[1]: Set hostname to . [ 11.230492] systemd[1]: Configuration file /etc/systemd/system/digital-envoy.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.230495] systemd[1]: Configuration file /etc/systemd/system/digital-envoy.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 11.248896] systemd[1]: Listening on udev Kernel Socket. [ 11.248972] systemd[1]: Listening on fsck to fsckd communication Socket. [ 11.249006] systemd[1]: Listening on udev Control Socket. [ 11.249189] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.249226] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.887481] lp: driver loaded but no devices found [ 12.044100] ppdev: user-space parallel port driver [ 14.853590] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.386876] systemd-journald[257]: Received request to flush runtime journal from PID 1 [ 16.068231] input: HP Wireless hotkeys as /devices/virtual/input/input15 [ 16.311968] hp_accel: laptop model unknown, using default axes configuration [ 16.443724] lis3lv02d: 8 bits 3DC sensor found [ 17.030733] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.840117] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16 [ 19.146057] Bluetooth: Core ver 2.22 [ 19.146072] NET: Registered protocol family 31 [ 19.146073] Bluetooth: HCI device and connection manager initialized [ 19.146075] Bluetooth: HCI socket layer initialized [ 19.146077] Bluetooth: L2CAP socket layer initialized [ 19.146082] Bluetooth: SCO socket layer initialized [ 19.696184] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 20.474669] usbcore: registered new interface driver btusb [ 20.475625] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 20.475627] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 20.577571] media: Linux media interface: v0.10 [ 20.716711] Linux video capture interface: v2.00 [ 20.993890] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 20.993893] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 20.999653] Bluetooth: hci0: rom_version status=0 version=1 [ 20.999658] Bluetooth: cfg_sz 0, total size 22496 [ 21.105596] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 21.105597] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 21.105598] RAPL PMU: hw unit of domain package 2^-14 Joules [ 21.105599] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 21.105599] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 21.573455] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b477) [ 21.574513] uvcvideo 2-7:1.0: Entity type for entity Extension 5 was not initialized! [ 21.574515] uvcvideo 2-7:1.0: Entity type for entity Extension 2 was not initialized! [ 21.574516] uvcvideo 2-7:1.0: Entity type for entity Processing 3 was not initialized! [ 21.574517] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! [ 21.574578] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input18 [ 21.574622] usbcore: registered new interface driver uvcvideo [ 21.574623] USB Video Class driver (1.1.1) [ 21.718664] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin [ 22.191900] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 22.192182] rtlwifi: rtlwifi: wireless switch is on [ 22.507556] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 22.631113] audit: type=1400 audit(1527426966.226:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=468 comm="apparmor_parser" [ 22.631132] audit: type=1400 audit(1527426966.226:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=469 comm="apparmor_parser" [ 22.749660] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 22.749663] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.749666] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 22.749668] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 22.749669] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 22.749672] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 22.749674] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 22.758858] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 22.758901] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 22.815838] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 22.815882] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 22.815919] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23 [ 22.815956] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24 [ 22.815992] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25 [ 22.961576] audit: type=1400 audit(1527426966.556:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=487 comm="apparmor_parser" [ 23.214204] audit: type=1400 audit(1527426966.809:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=471 comm="apparmor_parser" [ 23.214208] audit: type=1400 audit(1527426966.809:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser" [ 23.214211] audit: type=1400 audit(1527426966.809:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=471 comm="apparmor_parser" [ 23.214214] audit: type=1400 audit(1527426966.809:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser" [ 23.225650] audit: type=1400 audit(1527426966.820:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=470 comm="apparmor_parser" [ 23.225652] audit: type=1400 audit(1527426966.820:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=470 comm="apparmor_parser" [ 23.277061] AVX2 version of gcm_enc/dec engaged. [ 23.277062] AES CTR mode by8 optimization enabled [ 23.337127] audit: type=1400 audit(1527426966.932:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=497 comm="apparmor_parser" [ 26.158741] rtl8723be 0000:09:00.0 wlo1: renamed from wlan0 [ 26.877174] intel_rapl: Found RAPL domain package [ 26.877176] intel_rapl: Found RAPL domain core [ 26.877177] intel_rapl: Found RAPL domain uncore [ 26.877177] intel_rapl: Found RAPL domain dram [ 28.545435] kauditd_printk_skb: 56 callbacks suppressed [ 28.545436] audit: type=1400 audit(1527426972.140:68): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=683 comm="apparmor_parser" [ 28.588566] audit: type=1400 audit(1527426972.183:69): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=682 comm="apparmor_parser" [ 36.924038] Adding 16173052k swap on /dev/sda5. Priority:-1 extents:1 across:16173052k FS [ 45.373024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 45.373026] Bluetooth: BNEP filters: protocol multicast [ 45.373029] Bluetooth: BNEP socket layer initialized