[ 0.000000] Linux version 2.6.22-10-generic (buildd@palmer) (gcc version 4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 SMP Wed Aug 22 08:11:52 GMT 2007 (Ubuntu 2.6.22-10.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002be80000 (usable) [ 0.000000] BIOS-e820: 000000002be80000 - 000000002be93000 (ACPI data) [ 0.000000] BIOS-e820: 000000002be93000 - 000000002bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002bf00000 - 000000002c000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 702MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6a80 [ 0.000000] Entering add_active_range(0, 0, 179840) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 179840 [ 0.000000] HighMem 179840 -> 179840 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 179840 [ 0.000000] On node 0 totalpages: 179840 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1373 pages used for memmap [ 0.000000] Normal zone: 174371 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F69F0, 0014 (r0 TOSCPL) [ 0.000000] ACPI: RSDT 2BE8D997, 0038 (r1 TOSCPL RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 2BE92F00, 0074 (r1 TOSCPL SB450 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 2BE8E0F4, 4E0C (r1 TOSCPL SB450 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 2BE93FC0, 0040 [ 0.000000] ACPI: APIC 2BE92F74, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 2BE92FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: SSDT 2BE8DF04, 01F0 (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 0.000000] ACPI: SSDT 2BE8D9CF, 0535 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2c000000:b4000000) [ 0.000000] Built 1 zonelists. Total pages: 178435 [ 0.000000] Kernel command line: root=UUID=be6ae358-c99d-448a-9653-d5c78530275c ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1600.170 MHz processor. [ 19.477888] Console: colour VGA+ 80x25 [ 19.478910] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.479674] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.502201] Memory: 701452k/719360k available (2010k kernel code, 17344k reserved, 917k data, 364k init, 0k highmem) [ 19.502211] virtual kernel memory layout: [ 19.502212] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 19.502214] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.502215] vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB) [ 19.502217] lowmem : 0xc0000000 - 0xebe80000 ( 702 MB) [ 19.502218] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 19.502219] .data : 0xc02f69c6 - 0xc03dbe64 ( 917 kB) [ 19.502221] .text : 0xc0100000 - 0xc02f69c6 (2010 kB) [ 19.502225] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.502267] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 19.582183] Calibrating delay using timer specific routine.. 3205.01 BogoMIPS (lpj=6410030) [ 19.582212] Security Framework v1.0.0 initialized [ 19.582222] SELinux: Disabled at boot. [ 19.582237] Mount-cache hash table entries: 512 [ 19.582374] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 0000c109 00000000 00000000 [ 19.582385] monitor/mwait feature present. [ 19.582387] using mwait in idle threads. [ 19.582392] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.582395] CPU: L2 cache: 1024K [ 19.582398] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002940 0000c109 00000000 00000000 [ 19.582409] Compat vDSO mapped to ffffe000. [ 19.582423] Checking 'hlt' instruction... OK. [ 19.598277] SMP alternatives: switching to UP code [ 19.598476] Freeing SMP alternatives: 11k freed [ 19.598764] Early unpacking initramfs... done [ 19.958756] ACPI: Core revision 20070126 [ 19.958836] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.611795] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 [ 20.611826] Total of 1 processors activated (3205.01 BogoMIPS). [ 20.612004] ENABLING IO-APIC IRQs [ 20.612210] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 20.756515] Brought up 1 CPUs [ 20.756638] Booting paravirtualized kernel on bare hardware [ 20.756727] Time: 17:29:11 Date: 07/26/107 [ 20.756753] NET: Registered protocol family 16 [ 20.756846] EISA bus registered [ 20.756867] ACPI: bus type pci registered [ 20.774666] PCI: PCI BIOS revision 2.10 entry at 0xfd5b4, last bus=14 [ 20.774668] PCI: Using configuration type 1 [ 20.774671] Setting up standard PCI resources [ 20.779125] ACPI: EC: Look up EC in DSDT [ 20.779916] ACPI: EC: GPE=0x13, ports=0x66, 0x62 [ 20.781028] ACPI: System BIOS is requesting _OSI(Linux) [ 20.781031] ACPI: Please test with "acpi_osi=!Linux" [ 20.781033] Please send dmidecode to linux-acpi@vger.kernel.org [ 20.788026] ACPI: Interpreter enabled [ 20.788030] ACPI: (supports S0 S3 S4 S5) [ 20.788046] ACPI: Using IOAPIC for interrupt routing [ 20.833251] ACPI: EC: GPE=0x13, ports=0x66, 0x62 [ 20.833302] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.833312] PCI: Probing PCI hardware (bus 00) [ 20.834722] PCI: Transparent bridge - 0000:00:14.4 [ 20.834843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.835083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 20.835229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 20.835378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 20.837571] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 20.837699] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 20.837825] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 20.837946] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 20.838067] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 20.838196] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 20.838322] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 20.838443] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 20.838565] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 20.838655] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.838665] pnp: PnP ACPI init [ 20.838679] ACPI: bus type pnp registered [ 20.860426] pnp: PnP ACPI: found 10 devices [ 20.860429] ACPI: ACPI bus type pnp unregistered [ 20.860434] PnPBIOS: Disabled by ACPI PNP [ 20.860482] PCI: Using ACPI for IRQ routing [ 20.860485] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.892654] NET: Registered protocol family 8 [ 20.892656] NET: Registered protocol family 20 [ 20.892721] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.892730] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 20.892733] pnp: 00:08: ioport range 0x220-0x22f has been reserved [ 20.892736] pnp: 00:08: ioport range 0x40b-0x40b has been reserved [ 20.892739] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 20.892745] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 20.892748] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 20.892752] pnp: 00:09: iomem range 0x0-0xfff could not be reserved [ 20.896269] Time: tsc clocksource has been installed. [ 20.923037] PCI: Bridge: 0000:00:01.0 [ 20.923040] IO window: 9000-9fff [ 20.923044] MEM window: d0000000-d00fffff [ 20.923048] PREFETCH window: d8000000-dfffffff [ 20.923052] PCI: Bridge: 0000:00:06.0 [ 20.923053] IO window: disabled. [ 20.923057] MEM window: d0100000-d01fffff [ 20.923060] PREFETCH window: disabled. [ 20.923072] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 20.923074] IO window: 0000a400-0000a4ff [ 20.923081] IO window: 0000a800-0000a8ff [ 20.923088] PREFETCH window: 30000000-33ffffff [ 20.923095] MEM window: 38000000-3bffffff [ 20.923101] PCI: Bridge: 0000:00:14.4 [ 20.923105] IO window: a000-afff [ 20.923112] MEM window: d0200000-d02fffff [ 20.923118] PREFETCH window: 30000000-33ffffff [ 20.923144] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 20.923177] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 20.923196] NET: Registered protocol family 2 [ 20.960232] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.960390] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 20.963001] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.964131] TCP: Hash tables configured (established 131072 bind 65536) [ 20.964136] TCP reno registered [ 20.972385] checking if image is initramfs... it is [ 21.423515] Switched to high resolution mode on CPU 0 [ 21.695746] Freeing initrd memory: 7047k freed [ 21.696310] audit: initializing netlink socket (disabled) [ 21.696329] audit(1188149351.144:1): initialized [ 21.698357] VFS: Disk quotas dquot_6.5.1 [ 21.698409] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.698518] io scheduler noop registered [ 21.698521] io scheduler anticipatory registered [ 21.698523] io scheduler deadline registered [ 21.698539] io scheduler cfq registered (default) [ 21.698597] Boot video device is 0000:01:05.0 [ 21.698695] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 21.698733] assign_interrupt_mode Found MSI capability [ 21.698776] Allocate Port Service[0000:00:06.0:pcie00] [ 21.698969] isapnp: Scanning for PnP cards... [ 22.055712] isapnp: No Plug & Play device found [ 22.084035] Real Time Clock Driver v1.12ac [ 22.084165] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.085417] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.085669] input: Macintosh mouse button emulation as /class/input/input0 [ 22.085754] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 22.086118] i8042.c: Detected active multiplexing controller, rev 1.1. [ 22.086198] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.086204] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 22.086207] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 22.086210] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 22.086212] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 22.086398] mice: PS/2 mouse device common for all mice [ 22.086740] EISA: Probing bus 0 at eisa.0 [ 22.086752] Cannot allocate resource for EISA slot 1 [ 22.086782] Cannot allocate resource for EISA slot 8 [ 22.086784] EISA: Detected 0 cards. [ 22.086999] TCP cubic registered [ 22.087024] NET: Registered protocol family 1 [ 22.087056] Using IPI No-Shortcut mode [ 22.087247] Magic number: 3:695:492 [ 22.087872] Freeing unused kernel memory: 364k freed [ 22.130485] input: AT Translated Set 2 keyboard as /class/input/input1 [ 23.286902] AppArmor: AppArmor initialized [ 23.286912] audit(1188149352.644:2): AppArmor initialized [ 23.286913] [ 23.291778] AppArmor: Registered secondary security module: capability. [ 23.291783] Capability LSM initialized as secondary [ 23.301299] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 23.301315] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 23.767113] SCSI subsystem initialized [ 23.772873] libata version 2.21 loaded. [ 23.774244] sata_sil 0000:00:12.0: version 2.2 [ 23.774306] PCI: Enabling device 0000:00:12.0 (0005 -> 0007) [ 23.774320] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 23.774414] scsi0 : sata_sil [ 23.774463] scsi1 : sata_sil [ 23.774491] ata1: SATA max UDMA/100 cmd 0xec83a080 ctl 0xec83a08a bmdma 0xec83a000 irq 17 [ 23.774496] ata2: SATA max UDMA/100 cmd 0xec83a0c0 ctl 0xec83a0ca bmdma 0xec83a008 irq 17 [ 23.784582] usbcore: registered new interface driver usbfs [ 23.784608] usbcore: registered new interface driver hub [ 23.784630] usbcore: registered new device driver usb [ 23.803247] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.947609] 8139too Fast Ethernet driver 0.9.28 [ 3.924000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.948000] Time: acpi_pm clocksource has been installed. [ 3.992000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.000000] ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101A, max UDMA/100 [ 4.000000] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.008000] ata1.00: configured for UDMA/100 [ 4.320000] ata2: SATA link down (SStatus 0 SControl 300) [ 4.320000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5 [ 4.320000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 4.320000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 4.320000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 4.320000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0504000 [ 4.376000] usb usb1: configuration #1 chosen from 1 choice [ 4.376000] hub 1-0:1.0: USB hub found [ 4.376000] hub 1-0:1.0: 4 ports detected [ 4.480000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 4.480000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 4.480000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 4.480000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0505000 [ 4.536000] usb usb2: configuration #1 chosen from 1 choice [ 4.536000] hub 2-0:1.0: USB hub found [ 4.536000] hub 2-0:1.0: 4 ports detected [ 4.640000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18 [ 4.640000] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 4.640000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 4.640000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xd0506000 [ 4.640000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.640000] usb usb3: configuration #1 chosen from 1 choice [ 4.640000] hub 3-0:1.0: USB hub found [ 4.640000] hub 3-0:1.0: 8 ports detected [ 4.748000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 4.748000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 4.748000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 4.748000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 [ 4.748000] ATIIXP: chipset revision 128 [ 4.748000] ATIIXP: not 100% native mode: will probe irqs later [ 4.748000] ide1: BM-DMA at 0x8468-0x846f, BIOS settings: hdc:DMA, hdd:pio [ 4.748000] Probing IDE interface ide1... [ 4.764000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.764000] sd 0:0:0:0: [sda] Write Protect is off [ 4.764000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.764000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.764000] sd 0:0:0:0: [sda] Write Protect is off [ 4.764000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.764000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.764000] sda: sda1 sda2 sda3 sda4 [ 4.816000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.820000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.112000] Attempting manual resume [ 5.112000] swsusp: Resume From Partition 8:4 [ 5.112000] PM: Checking swsusp image. [ 5.112000] PM: Resume from disk failed. [ 5.156000] kjournald starting. Commit interval 5 seconds [ 5.156000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.328000] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 5.488000] hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive [ 5.528000] usb 1-1: configuration #1 chosen from 1 choice [ 5.824000] hdc: selected mode 0x42 [ 5.824000] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.824000] ACPI: PCI Interrupt 0000:09:06.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 5.824000] eth0: RealTek RTL8139 at 0xec83e000, 00:0f:b0:e4:8e:03, IRQ 17 [ 5.824000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 14.128000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 15.576000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.580000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.752000] Linux agpgart interface v0.102 (c) Dave Jones [ 15.764000] NET: Registered protocol family 17 [ 15.840000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 15.888000] ath_hal: module license 'Proprietary' taints kernel. [ 15.892000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 16.896000] wlan: 0.8.4.2 (0.9.3.2) [ 16.968000] Yenta: CardBus bridge found at 0000:09:04.0 [1179:ff00] [ 16.968000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 16.968000] Yenta: Routing CardBus interrupts to PCI [ 16.968000] Yenta TI: socket 0000:09:04.0, mfunc 0x00111c12, devctl 0x44 [ 17.024000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 17.144000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 17.144000] Uniform CD-ROM driver Revision: 3.20 [ 17.160000] usbcore: registered new interface driver hiddev [ 17.200000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16 [ 17.200000] Socket status: 30000006 [ 17.200000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 17.200000] cs: IO port probe 0xa000-0xafff: clean. [ 17.200000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 17.200000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 17.216000] input: PC Speaker as /class/input/input2 [ 17.248000] ath_pci: 0.9.4.5 (0.9.3.2) [ 17.248000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 17.248000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 17.772000] input: HID 062a:0000 as /class/input/input3 [ 17.772000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:13.0-1 [ 17.772000] usbcore: registered new interface driver usbhid [ 17.772000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 17.904000] ath_rate_sample: 1.2 (0.9.3.2) [ 17.904000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 17.904000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 17.904000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 17.904000] wifi0: mac 10.0 phy 6.1 radio 10.2 [ 17.904000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 17.904000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 17.904000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 17.904000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 17.904000] wifi0: Use hw queue 8 for CAB traffic [ 17.904000] wifi0: Use hw queue 9 for beacons [ 17.936000] wifi0: Atheros 5424/2424: mem=0xd0100000, irq=20 [ 18.232000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19 [ 18.260000] cs: IO port probe 0x100-0x3af: clean. [ 18.264000] cs: IO port probe 0x3e0-0x4ff: clean. [ 18.264000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f [ 18.264000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [ 18.276000] cs: IO port probe 0xa00-0xaff: clean. [ 18.932000] input: PS/2 ALPS GlidePoint as /class/input/input4 [ 19.740000] fuse init (API version 7.8) [ 19.816000] lp: driver loaded but no devices found [ 19.880000] Adding 1317320k swap on /dev/sda4. Priority:-1 extents:1 across:1317320k [ 20.224000] EXT3 FS on sda2, internal journal [ 20.492000] NET: Registered protocol family 10 [ 20.492000] lo: Disabled Privacy Extensions [ 21.080000] kjournald starting. Commit interval 5 seconds [ 21.080000] EXT3 FS on sda3, internal journal [ 21.080000] EXT3-fs: mounted filesystem with ordered data mode. [ 21.396000] AppArmor: Unregistered secondary security module: capability [ 25.788000] input: Power Button (FF) as /class/input/input5 [ 25.792000] ACPI: Power Button (FF) [PWRF] [ 25.836000] input: Lid Switch as /class/input/input6 [ 25.840000] ACPI: Lid Switch [LID] [ 25.884000] input: Power Button (CM) as /class/input/input7 [ 25.888000] ACPI: Power Button (CM) [PWRB] [ 25.900000] No dock devices found. [ 25.952000] ACPI: AC Adapter [ACAD] (on-line) [ 26.040000] ACPI: Battery Slot [BAT1] (battery present) [ 26.064000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 28.752000] ppdev: user-space parallel port driver [ 29.428000] audit(1188142180.314:3): REJECTING m access to /etc/passwd (cupsd(4904) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 29.428000] audit(1188142180.314:4): REJECTING m access to /etc/group (cupsd(4904) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 29.428000] audit(1188142180.314:5): REJECTING m access to /etc/group (cupsd(4904) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 30.048000] [fglrx] Maximum main memory to use for locked dma buffers: 616 MBytes. [ 30.048000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0 [ 30.068000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 30.096000] audit(1188142181.314:6): REJECTING w access to /dev/tty (cupsd(4904) profile /usr/sbin/cupsd active /usr/sbin/cupsd) [ 30.880000] apm: BIOS not found. [ 31.380000] eth0: no IPv6 routers present [ 31.928000] [fglrx] total GART = 130023424 [ 31.928000] [fglrx] free GART = 114032640 [ 31.928000] [fglrx] max single GART = 114032640 [ 31.928000] [fglrx] total LFB = 67108864 [ 31.928000] [fglrx] free LFB = 52719616 [ 31.928000] [fglrx] max single LFB = 52719616 [ 31.928000] [fglrx] total Inv = 0 [ 31.928000] [fglrx] free Inv = 0 [ 31.928000] [fglrx] max single Inv = 0 [ 31.928000] [fglrx] total TIM = 0 [ 33.188000] AppArmor: Registered secondary security module: capability. [ 33.188000] Capability LSM initialized as secondary [ 33.548000] Bluetooth: Core ver 2.11 [ 33.548000] NET: Registered protocol family 31 [ 33.548000] Bluetooth: HCI device and connection manager initialized [ 33.548000] Bluetooth: HCI socket layer initialized [ 33.632000] Bluetooth: L2CAP ver 2.8 [ 33.632000] Bluetooth: L2CAP socket layer initialized [ 33.640000] Bluetooth: RFCOMM socket layer initialized [ 33.640000] Bluetooth: RFCOMM TTY layer initialized [ 33.640000] Bluetooth: RFCOMM ver 1.8 [ 89.740000] hda-intel: Invalid position buffer, using LPIB read method instead.