==> dmesg.txt <== [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe6d800 (usable) [ 0.000000] BIOS-e820: 00000000bfe6d800 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0xbfe6d max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37821000 - 37fefd34 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FBC00, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT BFE6F200, 005C (r1 DELL M08 27D80A16 ASL 61) [ 0.000000] ACPI: FACP BFE6F09C, 00F4 (r4 DELL M08 27D80A16 ASL 61) [ 0.000000] ACPI: DSDT BFE6F800, 5733 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS BFE7E000, 0040 [ 0.000000] ACPI: HPET BFE6F300, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC BFE6F400, 0068 (r1 DELL M08 27D80A16 ASL 47) [ 0.000000] ACPI: MCFG BFE6F3C0, 003E (r16 DELL M08 27D80A16 ASL 61) [ 0.000000] ACPI: SLIC BFE6F49C, 0176 (r1 DELL M08 27D80A16 ASL 61) [ 0.000000] ACPI: BOOT BFE6EFC0, 0028 (r1 DELL M08 27D80A16 ASL 61) [ 0.000000] ACPI: SSDT BFE6D9BC, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0037821000 - 0037fefd34] RAMDISK ==> [0037821000 - 0037fefd34] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x000bfe6d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfe6d [ 0.000000] On node 0 totalpages: 785932 [ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 551760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779023 [ 0.000000] Kernel command line: root=UUID=16fbde5a-6487-4d1f-b816-18697ce8bf5b ro splash quiet [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PMTIMER calibration value [ 0.000000] Detected 2194.499 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 3101388k/3144116k available (2572k kernel code, 41496k reserved, 1160k data, 424k init, 2226612k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.99 BogoMIPS (lpj=8777996) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.017697] ACPI: Core revision 20080609 [ 0.019545] ACPI: Checking initramfs for custom DSDT [ 0.324258] ENABLING IO-APIC IRQs [ 0.324446] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.365274] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.368023] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4388.96 BogoMIPS (lpj=8777925) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.452589] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.452605] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.456046] Brought up 2 CPUs [ 0.456049] Total of 2 processors activated (8777.96 BogoMIPS). [ 0.456069] CPU0 attaching sched-domain: [ 0.456071] domain 0: span 0-1 level MC [ 0.456074] groups: 0 1 [ 0.456079] CPU1 attaching sched-domain: [ 0.456081] domain 0: span 0-1 level MC [ 0.456083] groups: 1 0 [ 0.456151] net_namespace: 840 bytes [ 0.456151] Booting paravirtualized kernel on bare hardware [ 0.456268] Time: 10:48:37 Date: 12/06/08 [ 0.456291] NET: Registered protocol family 16 [ 0.456308] EISA bus registered [ 0.456308] ACPI: bus type pci registered [ 0.456308] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.456308] PCI: MCFG area at f8000000 reserved in E820 [ 0.456308] PCI: Using MMCONFIG for extended config space [ 0.456308] PCI: Using configuration type 1 for base access [ 0.456851] ACPI: EC: Look up EC in DSDT [ 0.471472] ACPI: SSDT BFE7E080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 0.488403] ACPI: Interpreter enabled [ 0.488406] ACPI: (supports S0 S3 S4 S5) [ 0.490244] ACPI: Using IOAPIC for interrupt routing [ 0.534241] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.534241] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.534241] pci 0000:00:01.0: PME# disabled [ 0.534241] PCI: 0000:00:1a.0 reg 20 io port: [6f20, 6f3f] [ 0.534241] PCI: 0000:00:1a.1 reg 20 io port: [6f00, 6f1f] [ 0.534241] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff] [ 0.534241] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.534241] pci 0000:00:1a.7: PME# disabled [ 0.534241] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f6ffc000, f6ffffff] [ 0.534241] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.534241] pci 0000:00:1b.0: PME# disabled [ 0.534241] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.534241] pci 0000:00:1c.0: PME# disabled [ 0.534241] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.534241] pci 0000:00:1c.1: PME# disabled [ 0.536055] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.536060] pci 0000:00:1c.3: PME# disabled [ 0.536134] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.536139] pci 0000:00:1c.5: PME# disabled [ 0.536187] PCI: 0000:00:1d.0 reg 20 io port: [6f80, 6f9f] [ 0.536252] PCI: 0000:00:1d.1 reg 20 io port: [6f60, 6f7f] [ 0.536317] PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f] [ 0.536387] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff] [ 0.536445] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.536451] pci 0000:00:1d.7: PME# disabled [ 0.536612] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.536617] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.536646] PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7] [ 0.536655] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7] [ 0.536662] PCI: 0000:00:1f.1 reg 18 io port: [170, 177] [ 0.536670] PCI: 0000:00:1f.1 reg 1c io port: [374, 377] [ 0.536678] PCI: 0000:00:1f.1 reg 20 io port: [6fa0, 6faf] [ 0.536752] PCI: 0000:00:1f.2 reg 10 io port: [6eb0, 6eb7] [ 0.536761] PCI: 0000:00:1f.2 reg 14 io port: [6eb8, 6ebb] [ 0.536768] PCI: 0000:00:1f.2 reg 18 io port: [6ec0, 6ec7] [ 0.536776] PCI: 0000:00:1f.2 reg 1c io port: [6ec8, 6ecb] [ 0.536784] PCI: 0000:00:1f.2 reg 20 io port: [6ee0, 6eff] [ 0.536792] PCI: 0000:00:1f.2 reg 24 32bit mmio: [f6ffb800, f6ffbfff] [ 0.536826] pci 0000:00:1f.2: PME# supported from D3hot [ 0.536831] pci 0000:00:1f.2: PME# disabled [ 0.536852] PCI: 0000:00:1f.3 reg 10 32bit mmio: [f6ffb700, f6ffb7ff] [ 0.536879] PCI: 0000:00:1f.3 reg 20 io port: [10c0, 10df] [ 0.536955] PCI: 0000:01:00.0 reg 10 32bit mmio: [f5000000, f5ffffff] [ 0.536964] PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, efffffff] [ 0.536988] PCI: 0000:01:00.0 reg 1c 64bit mmio: [f2000000, f3ffffff] [ 0.536997] PCI: 0000:01:00.0 reg 24 io port: [ef00, ef7f] [ 0.537006] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.537083] PCI: bridge 0000:00:01.0 io port: [e000, efff] [ 0.537086] PCI: bridge 0000:00:01.0 32bit mmio: [f2000000, f6efffff] [ 0.537091] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff] [ 0.537276] PCI: 0000:0c:00.0 reg 10 64bit mmio: [f1ffe000, f1ffffff] [ 0.537384] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.537402] pci 0000:0c:00.0: PME# disabled [ 0.537458] PCI: bridge 0000:00:1c.1 32bit mmio: [f1f00000, f1ffffff] [ 0.537525] PCI: bridge 0000:00:1c.3 io port: [d000, dfff] [ 0.537530] PCI: bridge 0000:00:1c.3 32bit mmio: [f1c00000, f1efffff] [ 0.537538] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff] [ 0.537729] PCI: 0000:09:00.0 reg 10 64bit mmio: [f1bf0000, f1bfffff] [ 0.537884] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.537896] pci 0000:09:00.0: PME# disabled [ 0.537952] PCI: bridge 0000:00:1c.5 32bit mmio: [f1b00000, f1bfffff] [ 0.538004] PCI: 0000:03:01.0 reg 10 32bit mmio: [f1aff800, f1afffff] [ 0.538060] pci 0000:03:01.0: supports D1 [ 0.538062] pci 0000:03:01.0: supports D2 [ 0.538064] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538069] pci 0000:03:01.0: PME# disabled [ 0.538105] PCI: 0000:03:01.1 reg 10 32bit mmio: [f1aff400, f1aff4ff] [ 0.538162] pci 0000:03:01.1: supports D1 [ 0.538164] pci 0000:03:01.1: supports D2 [ 0.538165] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538170] pci 0000:03:01.1: PME# disabled [ 0.538206] PCI: 0000:03:01.2 reg 10 32bit mmio: [f1aff500, f1aff5ff] [ 0.538264] pci 0000:03:01.2: supports D1 [ 0.538266] pci 0000:03:01.2: supports D2 [ 0.538268] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538272] pci 0000:03:01.2: PME# disabled [ 0.538311] PCI: 0000:03:01.3 reg 10 32bit mmio: [f1aff600, f1aff6ff] [ 0.538366] pci 0000:03:01.3: supports D1 [ 0.538368] pci 0000:03:01.3: supports D2 [ 0.538370] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538375] pci 0000:03:01.3: PME# disabled [ 0.538411] PCI: 0000:03:01.4 reg 10 32bit mmio: [f1aff700, f1aff7ff] [ 0.538466] pci 0000:03:01.4: supports D1 [ 0.538468] pci 0000:03:01.4: supports D2 [ 0.538470] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.538475] pci 0000:03:01.4: PME# disabled [ 0.538538] pci 0000:00:1e.0: transparent bridge [ 0.538546] PCI: bridge 0000:00:1e.0 32bit mmio: [f1a00000, f1afffff] [ 0.538589] bus 00 -> node 0 [ 0.538595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.539070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.539233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.539345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.539480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.539614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.539747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.552160] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 0.552298] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.552432] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 0.552566] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 0.552699] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.552839] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.552976] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.553099] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.553172] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.553172] pnp: PnP ACPI init [ 0.553172] ACPI: bus type pnp registered [ 0.584639] pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.584639] pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.584639] pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.584639] pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.584639] pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.584639] pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.609954] pnp: PnP ACPI: found 12 devices [ 0.609954] ACPI: ACPI bus type pnp unregistered [ 0.609954] PnPBIOS: Disabled by ACPI PNP [ 0.609954] PCI: Using ACPI for IRQ routing [ 0.616039] NET: Registered protocol family 8 [ 0.616041] NET: Registered protocol family 20 [ 0.616055] NetLabel: Initializing [ 0.616055] NetLabel: domain hash size = 128 [ 0.616055] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.616061] NetLabel: unlabeled traffic allowed by default [ 0.616068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.616072] hpet0: 3 64-bit timers, 14318180 Hz [ 0.617492] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.617494] actual entries 65620 [ 0.617568] AppArmor: AppArmor Filesystem Enabled [ 0.617593] ACPI: RTC can wake from S4 [ 0.620038] Switched to high resolution mode on CPU 0 [ 0.620624] Switched to high resolution mode on CPU 1 [ 0.624021] system 00:05: ioport range 0xc80-0xcff could not be reserved [ 0.624028] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.624033] system 00:09: ioport range 0x900-0x97f has been reserved [ 0.624036] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.624042] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 0.624045] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 0.624047] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 0.624050] system 00:0a: ioport range 0x809-0x809 has been reserved [ 0.624056] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 0.624059] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 0.624061] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 0.624064] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.624067] system 00:0b: iomem range 0x100000-0xbfe6d7ff could not be reserved [ 0.624069] system 00:0b: iomem range 0xbfe6d800-0xbfefffff could not be reserved [ 0.624072] system 00:0b: iomem range 0xbff00000-0xbfffffff could not be reserved [ 0.624075] system 00:0b: iomem range 0xbff00000-0xc06fffff could not be reserved [ 0.624078] system 00:0b: iomem range 0xffe00000-0xffffffff could not be reserved [ 0.624081] system 00:0b: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.624083] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.624086] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 0.624089] system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 0.624091] system 00:0b: iomem range 0xfeda0000-0xfeda3fff could not be reserved [ 0.624094] system 00:0b: iomem range 0xfeda4000-0xfeda4fff could not be reserved [ 0.624097] system 00:0b: iomem range 0xfeda5000-0xfeda5fff could not be reserved [ 0.624099] system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.624102] system 00:0b: iomem range 0xfed18000-0xfed1bfff could not be reserved [ 0.624105] system 00:0b: iomem range 0xf8000000-0xfbffffff could not be reserved [ 0.659146] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.659149] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.659153] pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff [ 0.659156] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.659161] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.659163] pci 0000:00:1c.0: IO window: disabled [ 0.659169] pci 0000:00:1c.0: MEM window: disabled [ 0.659174] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.659182] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c [ 0.659184] pci 0000:00:1c.1: IO window: disabled [ 0.659190] pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff [ 0.659195] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.659202] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d [ 0.659206] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.659212] pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff [ 0.659217] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.659225] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 [ 0.659227] pci 0000:00:1c.5: IO window: disabled [ 0.659234] pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff [ 0.659238] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.659246] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.659248] pci 0000:00:1e.0: IO window: disabled [ 0.659254] pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff [ 0.659259] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.659274] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.659277] pci 0000:00:01.0: setting latency timer to 64 [ 0.659286] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.659291] pci 0000:00:1c.0: setting latency timer to 64 [ 0.659300] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.659305] pci 0000:00:1c.1: setting latency timer to 64 [ 0.659315] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.659320] pci 0000:00:1c.3: setting latency timer to 64 [ 0.659329] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.659334] pci 0000:00:1c.5: setting latency timer to 64 [ 0.659342] pci 0000:00:1e.0: setting latency timer to 64 [ 0.659346] bus: 00 index 0 io port: [0, ffff] [ 0.659348] bus: 00 index 1 mmio: [0, ffffffff] [ 0.659350] bus: 01 index 0 io port: [e000, efff] [ 0.659352] bus: 01 index 1 mmio: [f2000000, f6efffff] [ 0.659354] bus: 01 index 2 mmio: [e0000000, efffffff] [ 0.659355] bus: 01 index 3 mmio: [0, 0] [ 0.659357] bus: 0b index 0 mmio: [0, 0] [ 0.659359] bus: 0b index 1 mmio: [0, 0] [ 0.659360] bus: 0b index 2 mmio: [0, 0] [ 0.659362] bus: 0b index 3 mmio: [0, 0] [ 0.659364] bus: 0c index 0 mmio: [0, 0] [ 0.659366] bus: 0c index 1 mmio: [f1f00000, f1ffffff] [ 0.659368] bus: 0c index 2 mmio: [0, 0] [ 0.659369] bus: 0c index 3 mmio: [0, 0] [ 0.659371] bus: 0d index 0 io port: [d000, dfff] [ 0.659373] bus: 0d index 1 mmio: [f1c00000, f1efffff] [ 0.659375] bus: 0d index 2 mmio: [f0000000, f01fffff] [ 0.659377] bus: 0d index 3 mmio: [0, 0] [ 0.659378] bus: 09 index 0 mmio: [0, 0] [ 0.659380] bus: 09 index 1 mmio: [f1b00000, f1bfffff] [ 0.659382] bus: 09 index 2 mmio: [0, 0] [ 0.659384] bus: 09 index 3 mmio: [0, 0] [ 0.659385] bus: 03 index 0 mmio: [0, 0] [ 0.659387] bus: 03 index 1 mmio: [f1a00000, f1afffff] [ 0.659389] bus: 03 index 2 mmio: [0, 0] [ 0.659391] bus: 03 index 3 io port: [0, ffff] [ 0.659392] bus: 03 index 4 mmio: [0, ffffffff] [ 0.659399] NET: Registered protocol family 2 [ 0.672042] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.672238] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.672528] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.672671] TCP: Hash tables configured (established 131072 bind 65536) [ 0.672674] TCP reno registered [ 0.676057] NET: Registered protocol family 1 [ 0.676148] checking if image is initramfs... it is [ 1.297303] Freeing initrd memory: 7995k freed [ 1.297469] Simple Boot Flag at 0x79 set to 0x1 [ 1.298298] audit: initializing netlink socket (disabled) [ 1.298320] type=2000 audit(1228560517.297:1): initialized [ 1.303679] highmem bounce pool size: 64 pages [ 1.303684] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.305750] VFS: Disk quotas dquot_6.5.1 [ 1.305825] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.305913] msgmni has been set to 1725 [ 1.306015] io scheduler noop registered [ 1.306017] io scheduler anticipatory registered [ 1.306020] io scheduler deadline registered [ 1.306030] io scheduler cfq registered (default) [ 1.306192] pci 0000:01:00.0: Boot video device [ 1.306305] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.306340] pcieport-driver 0000:00:01.0: found MSI capability [ 1.306370] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.306404] pci_express 0000:00:01.0:pcie02: allocate port service [ 1.306436] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.306518] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.306568] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.306616] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.306649] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.306682] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.306785] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.306835] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.306883] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.306918] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.306953] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.307058] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.307108] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.307156] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.307189] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.307223] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.307327] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.307377] pcieport-driver 0000:00:1c.5: found MSI capability [ 1.307424] pci_express 0000:00:1c.5:pcie00: allocate port service [ 1.307460] pci_express 0000:00:1c.5:pcie02: allocate port service [ 1.307495] pci_express 0000:00:1c.5:pcie03: allocate port service [ 1.307806] isapnp: Scanning for PnP cards... [ 1.661826] isapnp: No Plug & Play device found [ 1.690442] hpet_resources: 0xfed00000 is busy [ 1.690539] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.692408] brd: module loaded [ 1.692467] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.692571] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.695852] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.695857] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.696073] mice: PS/2 mouse device common for all mice [ 1.696179] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.696209] rtc0: alarms up to one month, y3k, hpet irqs [ 1.696320] EISA: Probing bus 0 at eisa.0 [ 1.696328] Cannot allocate resource for EISA slot 1 [ 1.696358] EISA: Detected 0 cards. [ 1.696361] cpuidle: using governor ladder [ 1.696363] cpuidle: using governor menu [ 1.696813] TCP cubic registered [ 1.696838] Using IPI No-Shortcut mode [ 1.696988] registered taskstats version 1 [ 1.697119] Magic number: 4:334:830 [ 1.697148] tty ptyqd: hash matches [ 1.697163] acpi PNP0C32:00: hash matches [ 1.697203] rtc_cmos 00:03: setting system clock to 2008-12-06 10:48:38 UTC (1228560518) [ 1.697206] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.697208] EDD information not available. [ 1.697415] Freeing unused kernel memory: 424k freed [ 1.697448] Write protecting the kernel text: 2576k [ 1.697471] Write protecting the kernel read-only data: 936k [ 1.698885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.841043] fuse init (API version 7.9) [ 1.985415] ACPI: SSDT BFE6E4F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 1.985760] ACPI: SSDT BFE6DE88, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 2.040475] Monitor-Mwait will be used to enter C-1 state [ 2.040478] Monitor-Mwait will be used to enter C-2 state [ 2.040480] Monitor-Mwait will be used to enter C-3 state [ 2.040647] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.040695] processor ACPI0007:00: registered as cooling_device0 [ 2.040699] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.041005] ACPI: SSDT BFE6E778, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 2.041311] ACPI: SSDT BFE6E46D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 2.041880] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.041923] processor ACPI0007:01: registered as cooling_device1 [ 2.041927] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.047602] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.051353] ACPI: Thermal Zone [THM] (71 C) [ 2.059191] Marking TSC unstable due to TSC halts in idle [ 2.400343] usbcore: registered new interface driver usbfs [ 2.400362] usbcore: registered new interface driver hub [ 2.400424] usbcore: registered new device driver usb [ 2.402843] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.402859] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.402864] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.402898] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.406839] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.406852] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.406864] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 2.412935] USB Universal Host Controller Interface driver v3.0 [ 2.421019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.421131] usb usb1: configuration #1 chosen from 1 choice [ 2.421155] hub 1-0:1.0: USB hub found [ 2.421162] hub 1-0:1.0: 4 ports detected [ 2.468047] No dock devices found. [ 2.481378] SCSI subsystem initialized [ 2.512281] libata version 3.00 loaded. [ 2.525234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.525243] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.525247] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.525268] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 2.525303] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 2.525389] usb usb2: configuration #1 chosen from 1 choice [ 2.525412] hub 2-0:1.0: USB hub found [ 2.525419] hub 2-0:1.0: 2 ports detected [ 2.629274] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.629283] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.629287] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.629309] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 2.629344] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 2.629428] usb usb3: configuration #1 chosen from 1 choice [ 2.629451] hub 3-0:1.0: USB hub found [ 2.629457] hub 3-0:1.0: 2 ports detected [ 2.733461] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.733477] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.733481] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.733502] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 2.737400] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.737407] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.737414] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 2.753019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.753118] usb usb4: configuration #1 chosen from 1 choice [ 2.753142] hub 4-0:1.0: USB hub found [ 2.753149] hub 4-0:1.0: 6 ports detected [ 2.960991] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.961017] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.961022] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.961048] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.961077] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 2.961160] usb usb5: configuration #1 chosen from 1 choice [ 2.961183] hub 5-0:1.0: USB hub found [ 2.961190] hub 5-0:1.0: 2 ports detected [ 3.001108] Clocksource tsc unstable (delta = -80892055 ns) [ 3.064647] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.064654] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.064657] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.064683] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.064710] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 3.064786] usb usb6: configuration #1 chosen from 1 choice [ 3.064808] hub 6-0:1.0: USB hub found [ 3.064814] hub 6-0:1.0: 2 ports detected [ 3.168635] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 3.168642] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.168646] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.168670] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 3.168697] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 3.168771] usb usb7: configuration #1 chosen from 1 choice [ 3.168794] hub 7-0:1.0: USB hub found [ 3.168800] hub 7-0:1.0: 2 ports detected [ 3.184130] usb 4-6: new high speed USB device using ehci_hcd and address 3 [ 3.321583] usb 4-6: configuration #1 chosen from 1 choice [ 3.378813] ahci 0000:00:1f.2: version 3.0 [ 3.378827] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.378939] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 3.378943] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems [ 3.378948] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.379113] scsi0 : ahci [ 3.379354] scsi1 : ahci [ 3.379453] scsi2 : ahci [ 3.379728] ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 218 [ 3.379730] ata2: DUMMY [ 3.379733] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 218 [ 3.488130] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 3.660132] usb 7-1: configuration #1 chosen from 1 choice [ 3.696161] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.757508] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010D, max UDMA/100 [ 3.757514] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 3.758498] ata1.00: configured for UDMA/100 [ 4.092156] ata3: SATA link down (SStatus 0 SControl 300) [ 4.108298] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 4.108418] ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.121097] tg3.c:v3.94 (August 14, 2008) [ 4.121118] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.121131] tg3 0000:09:00.0: setting latency timer to 64 [ 4.161124] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f1aff800-f1afffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.477469] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1d:09:35:c4:bc [ 4.477472] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0] [ 4.477475] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 4.477512] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.477539] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 4.477551] pata_acpi 0000:00:1f.1: PCI INT A disabled [ 4.480767] ata_piix 0000:00:1f.1: version 2.12 [ 4.480774] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.480801] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 4.481599] scsi3 : ata_piix [ 4.481878] scsi4 : ata_piix [ 4.482600] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 4.482603] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 4.487758] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.503852] Driver 'sd' needs updating - please use bus_type methods [ 4.503938] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 4.503955] sd 0:0:0:0: [sda] Write Protect is off [ 4.503958] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.503986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.504053] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 4.504069] sd 0:0:0:0: [sda] Write Protect is off [ 4.504071] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.504101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.504104] sda: sda1 sda2 < sda5 > sda3 [ 4.599236] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.648746] ata4.00: ATAPI: HL-DT-ST DVDRW GSA-S10N, A100, max UDMA/33 [ 4.664603] ata4.00: configured for UDMA/33 [ 4.664676] ata5: port disabled. ignoring. [ 4.667662] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRW GSA-S10N A100 PQ: 0 ANSI: 5 [ 4.667831] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 4.693038] Driver 'sr' needs updating - please use bus_type methods [ 4.701709] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy [ 4.701715] Uniform CD-ROM driver Revision: 3.20 [ 4.701832] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 4.925796] PM: Starting manual resume from disk [ 4.925799] PM: Resume from partition 8:5 [ 4.925800] PM: Checking hibernation image. [ 4.925981] PM: Resume from disk failed. [ 4.986639] kjournald starting. Commit interval 5 seconds [ 4.986660] EXT3-fs: mounted filesystem with ordered data mode. [ 5.436228] ieee1394: Host added: ID:BUS[0-00:1023] GUID[334fc000339f3870] [ 10.060440] udevd version 124 started [ 10.371094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.443350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.517859] ACPI: AC Adapter [AC] (on-line) [ 10.560393] Linux agpgart interface v0.103 [ 10.593638] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 10.594143] ACPI: Lid Switch [LID] [ 10.594190] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 10.617037] ACPI: Power Button (CM) [PBTN] [ 10.617096] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 10.653297] ACPI: Sleep Button (CM) [SBTN] [ 10.684857] ACPI: Battery Slot [BAT0] (battery present) [ 10.753247] ACPI: WMI: Mapper loaded [ 10.954202] acpi device:32: registered as cooling_device2 [ 10.955341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/device:2f/input/input5 [ 10.973031] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 10.982872] acpi device:37: registered as cooling_device3 [ 10.983641] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/input/input6 [ 11.000283] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 11.000444] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:39/input/input7 [ 11.025019] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 11.204512] nvidia: module license 'NVIDIA' taints kernel. [ 11.474814] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.474823] nvidia 0000:01:00.0: setting latency timer to 64 [ 11.475174] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 [ 11.504296] iTCO_vendor_support: vendor-support=0 [ 11.556033] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 11.556114] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 11.556215] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.598992] ricoh-mmc: Ricoh MMC Controller disabling driver [ 11.598995] ricoh-mmc: Copyright(c) Philip Langdale [ 11.599025] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) [ 11.599044] ricoh-mmc: Controller is now disabled. [ 11.696367] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 11.761025] sdhci: Secure Digital Host Controller Interface driver [ 11.761028] sdhci: Copyright(c) Pierre Ossman [ 11.780615] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) [ 11.780634] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 11.783681] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 11.831448] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 11.831471] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.864284] Linux video capture interface: v2.00 [ 11.883469] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:7670) [ 11.883843] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 11.942317] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-6/4-6:1.0/input/input9 [ 11.953861] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 11.953864] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 11.980979] usbcore: registered new interface driver uvcvideo [ 11.980983] USB Video Class driver (v0.1.0) [ 12.177467] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 12.177486] iwlagn 0000:0c:00.0: setting latency timer to 64 [ 12.177540] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 12.227548] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 12.229991] iwlagn 0000:0c:00.0: PCI INT A disabled [ 12.230360] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 12.402551] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000 [ 12.438562] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 12.495015] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 13.047657] lp: driver loaded but no devices found [ 13.164067] Adding 4000176k swap on /dev/sda5. Priority:-1 extents:1 across:4000176k [ 13.697623] EXT3 FS on sda1, internal journal [ 18.099711] kjournald starting. Commit interval 5 seconds [ 18.099724] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 18.099955] EXT3 FS on sda3, internal journal [ 18.099962] EXT3-fs: mounted filesystem with ordered data mode. [ 18.444312] type=1505 audit(1228560535.559:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4289 [ 18.590587] type=1505 audit(1228560535.703:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4294 [ 18.590755] type=1505 audit(1228560535.703:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4294 [ 18.704338] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.914881] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 20.111319] NET: Registered protocol family 10 [ 20.112529] lo: Disabled Privacy Extensions [ 20.416224] apm: BIOS not found. [ 20.650313] ppdev: user-space parallel port driver [ 21.944158] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 22.117192] usb 5-1: configuration #1 chosen from 1 choice [ 22.302124] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 22.302477] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use [ 22.302484] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 22.302491] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.745819] usbcore: registered new interface driver hiddev [ 22.760767] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input11 [ 22.764298] input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1 [ 22.765659] usbcore: registered new interface driver usbhid [ 22.766083] usbhid: v2.6:USB HID core driver [ 23.093255] Netfilter messages via NETLINK v0.30. [ 23.128534] ctnetlink v0.93: registering with nfnetlink. [ 23.466731] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 29.828004] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.286797] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 30.286895] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [ 30.287933] firmware: requesting iwlwifi-4965-2.ucode [ 30.693588] iwlagn: Radio disabled by HW RF Kill switch [ 30.724543] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.502051] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 31.502058] tg3: eth0: Flow control is on for TX and on for RX. [ 31.502227] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.596965] NET: Registered protocol family 17 [ 41.824071] eth0: no IPv6 routers present [ 66.718286] CPU0 attaching NULL sched-domain. [ 66.718295] CPU1 attaching NULL sched-domain. [ 66.730319] CPU0 attaching sched-domain: [ 66.730325] domain 0: span 0-1 level MC [ 66.730327] groups: 0 1 [ 66.730333] CPU1 attaching sched-domain: [ 66.730335] domain 0: span 0-1 level MC [ 66.730337] groups: 1 0 ==> lspci-vvnn.txt <== 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Dell Device [1028:0209] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Dell Device [1028:0209] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41c1 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise- Slot # 1, PowerLimit 75.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) Subsystem: Dell Device [1028:0209] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41c9 Capabilities: [90] Subsystem: Dell Device [1028:0209] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41d1 Capabilities: [90] Subsystem: Dell Device [1028:0209] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 5, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41d9 Capabilities: [90] Subsystem: Dell Device [1028:0209] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 41e1 Capabilities: [90] Subsystem: Dell Device [1028:0209] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) Subsystem: Dell Device [1028:0209] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device [1028:0209] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) Subsystem: Dell Device [1028:0209] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel modules: iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:0209] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: Dell Device [1028:0209] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Capabilities: [128] Power Budgeting Capabilities: [600] Vendor Specific Information Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10) Subsystem: Dell Device [1028:0209] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 4152 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number bc-c4-35-fe-ff-09-1d-00 Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61) Subsystem: Intel Corporation Device [8086:1121] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [140] Device Serial Number d3-8d-5f-ff-ff-e0-1d-00 Kernel driver in use: iwlagn Kernel modules: iwlagn ==> menu.lst <== # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 2 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=16fbde5a-6487-4d1f-b816-18697ce8bf5b ro ## default grub root device ## e.g. groot=(hd0,0) # groot=16fbde5a-6487-4d1f-b816-18697ce8bf5b ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 8.10, kernel 2.6.27-9-generic uuid 16fbde5a-6487-4d1f-b816-18697ce8bf5b kernel /boot/vmlinuz-2.6.27-9-generic root=UUID=16fbde5a-6487-4d1f-b816-18697ce8bf5b ro splash initrd /boot/initrd.img-2.6.27-9-generic quiet title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) uuid 16fbde5a-6487-4d1f-b816-18697ce8bf5b kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=16fbde5a-6487-4d1f-b816-18697ce8bf5b ro single initrd /boot/initrd.img-2.6.27-7-generic title Ubuntu 8.10, memtest86+ uuid 16fbde5a-6487-4d1f-b816-18697ce8bf5b kernel /boot/memtest86+.bin quiet ### END DEBIAN AUTOMAGIC KERNELS LIST ==> uname-a.txt <== Linux m1330 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 GNU/Linux ==> usplash.conf <== # Usplash configuration file # These parameters will only apply after running update-initramfs. xres=1280 yres=800