When I enable bootsplash, boot more than doubles.
Computer : Intel Core 2 Duo, G965 Chipset on Dell XPS 200
This is my log :
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009e400 end: 000000000009e400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f551c00 end: 000000003f651c00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f651c00 size: 0000000000002000 end: 000000003f653c00 type: 4
[ 0.000000] copy_e820_map() start: 000000003f655c00 size: 0000000000002000 end: 000000003f657c00 type: 3
[ 0.000000] copy_e820_map() start: 000000003f657c00 size: 00000000009a8400 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000100400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f651c00 (usable)
[ 0.000000] BIOS-e820: 000000003f651c00 - 000000003f653c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f655c00 - 000000003f657c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f657c00 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe710
[ 0.000000] Entering add_active_range(0, 0, 259665) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259665
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259665
[ 0.000000] On node 0 totalpages: 259665
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 236 pages used for memmap
[ 0.000000] HighMem zone: 30053 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v002 DELL ) @ 0x000febf0
[ 0.000000] ACPI: XSDT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd08b
[ 0.000000] ACPI: FADT (v003 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd1ab
[ 0.000000] ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050624) @ 0xfffdb1d0
[ 0.000000] ACPI: MADT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd29f
[ 0.000000] ACPI: BOOT (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd331
[ 0.000000] ACPI: MCFG (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd359
[ 0.000000] ACPI: HPET (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd397
[ 0.000000] ACPI: DUMY (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x3f655c00
[ 0.000000] ACPI: SLIC (v001 DELL B8K 0x00000014 ASL 0x00000061) @ 0x000fd3cf
[ 0.000000] ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050624) @ 0x3f651c40
[ 0.000000] ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050624) @ 0x3f652049
[ 0.000000] ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050624) @ 0x3f652452
[ 0.000000] ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 2128.158 MHz processor.
[ 61.442833] Built 1 zonelists. Total pages: 257637
[ 61.442836] Kernel command line: root=UUID=54fd549b-1fc2-4407-994c-58ad95843e42 ro splash bootchart
[ 61.442957] mapped APIC to ffffd000 (fee00000)
[ 61.442959] mapped IOAPIC to ffffc000 (fec00000)
[ 61.442961] Enabling fast FPU save and restore... done.
[ 61.442963] Enabling unmasked SIMD FPU exception support... done.
[ 61.442970] Initializing CPU#0
[ 61.443015] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 61.444218] Console: colour VGA+ 80x25
[ 61.447759] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 61.448098] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 61.464003] Memory: 1018484k/1038660k available (1992k kernel code, 19404k reserved, 893k data, 328k init, 121156k highmem)
[ 61.464087] virtual kernel memory layout:
[ 61.464088] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 61.464089] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 61.464090] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 61.464091] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 61.464092] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 61.464092] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 61.464093] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 61.464472] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 61.464667] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 61.464792] hpet0: 3 64-bit timers, 14318180 Hz
[ 61.465839] Using HPET for base-timer
[ 61.544637] Calibrating delay using timer specific routine.. 4259.11 BogoMIPS (lpj=8518236)
[ 61.544755] Security Framework v1.0.0 initialized
[ 61.544804] SELinux: Disabled at boot.
[ 61.544858] Mount-cache hash table entries: 512
[ 61.544995] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 61.545001] monitor/mwait feature present.
[ 61.545047] using mwait in idle threads.
[ 61.545093] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 61.545159] CPU: L2 cache: 2048K
[ 61.545202] CPU: Physical Processor ID: 0
[ 61.545247] CPU: Processor Core ID: 0
[ 61.545291] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 61.545298] Compat vDSO mapped to ffffe000.
[ 61.545344] Remapping vsyscall page to ffffe000
[ 61.545398] Checking 'hlt' instruction... OK.
[ 61.560752] SMP alternatives: switching to UP code
[ 61.561062] Early unpacking initramfs... done
[ 61.808480] ACPI: Core revision 20060707
[ 61.826642] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 61.925950] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 61.926052] SMP alternatives: switching to SMP code
[ 61.926155] Booting processor 1/1 eip 3000
[ 61.936538] Initializing CPU#1
[ 62.016438] Calibrating delay using timer specific routine.. 4256.09 BogoMIPS (lpj=8512191)
[ 62.016443] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 62.016447] monitor/mwait feature present.
[ 62.016449] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 62.016451] CPU: L2 cache: 2048K
[ 62.016452] CPU: Physical Processor ID: 0
[ 62.016453] CPU: Processor Core ID: 1
[ 62.016454] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 62.016793] CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 62.017224] Total of 2 processors activated (8515.21 BogoMIPS).
[ 62.017411] ENABLING IO-APIC IRQs
[ 62.017615] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 62.164377] checking TSC synchronization across 2 CPUs: passed.
[ 0.003967] Brought up 2 CPUs
[ 0.038616] migration_cost=23
[ 0.038910] Booting paravirtualized kernel on bare hardware
[ 0.039019] Time: 15:10:41 Date: 05/03/107
[ 0.039084] NET: Registered protocol family 16
[ 0.039193] EISA bus registered
[ 0.039240] ACPI: bus type pci registered
[ 0.073329] PCI: PCI BIOS revision 2.10 entry at 0xfb7f8, last bus=3
[ 0.073380] PCI: Using configuration type 1
[ 0.073425] Setting up standard PCI resources
[ 0.155045] ACPI: Interpreter enabled
[ 0.155091] ACPI: Using IOAPIC for interrupt routing
[ 0.160620] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.160673] PCI: Probing PCI hardware (bus 00)
[ 0.160686] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.170540] Boot video device is 0000:00:02.0
[ 0.171048] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.171101] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.171453] PCI: Transparent bridge - 0000:00:1e.0
[ 0.171535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.900556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 1.911469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 1.932517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 2.013011] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.015002] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.017002] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.019017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.021091] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.023068] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.025063] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.027055] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 2.029718] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 2.029775] pnp: PnP ACPI init
[ 2.086569] pnp: PnP ACPI: found 9 devices
[ 2.086617] PnPBIOS: Disabled by ACPI PNP
[ 2.086693] PCI: Using ACPI for IRQ routing
[ 2.086739] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 2.095598] NET: Registered protocol family 8
[ 2.095644] NET: Registered protocol family 20
[ 2.114035] pnp: 00:01: ioport range 0x800-0x85f could not be reserved
[ 2.114087] pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
[ 2.114138] pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
[ 2.114195] pnp: 00:07: ioport range 0x100-0x1fe has been reserved
[ 2.114245] pnp: 00:07: ioport range 0x200-0x277 has been reserved
[ 2.114296] pnp: 00:07: ioport range 0x280-0x2e7 has been reserved
[ 2.114346] pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved
[ 2.114397] pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved
[ 2.114447] pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved
[ 2.114498] pnp: 00:07: ioport range 0x300-0x377 has been reserved
[ 2.114548] pnp: 00:07: ioport range 0x380-0x3bb has been reserved
[ 2.114815] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 2.114866] PCI: Bridge: 0000:00:01.0
[ 2.114910] IO window: disabled.
[ 2.114956] MEM window: dfc00000-dfcfffff
[ 2.115002] PREFETCH window: disabled.
[ 2.115048] PCI: Bridge: 0000:00:1c.0
[ 2.115097] IO window: disabled.
[ 2.115143] MEM window: dfb00000-dfbfffff
[ 2.115189] PREFETCH window: disabled.
[ 2.115237] PCI: Bridge: 0000:00:1e.0
[ 2.115280] IO window: disabled.
[ 2.115327] MEM window: dfa00000-dfafffff
[ 2.115374] PREFETCH window: disabled.
[ 2.115430] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.116209] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.116222] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.116312] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.116321] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 2.116340] NET: Registered protocol family 2
[ 2.167349] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.167484] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.167907] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.168137] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.168189] TCP reno registered
[ 2.183511] checking if image is initramfs... it is
[ 2.673814] Freeing initrd memory: 6750k freed
[ 2.674007] Simple Boot Flag at 0x7a set to 0x1
[ 2.674422] audit: initializing netlink socket (disabled)
[ 2.674483] audit(1180883444.456:1): initialized
[ 2.674605] highmem bounce pool size: 64 pages
[ 2.674716] VFS: Disk quotas dquot_6.5.1
[ 2.674775] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.674870] io scheduler noop registered
[ 2.674934] io scheduler anticipatory registered
[ 2.674999] io scheduler deadline registered
[ 2.675070] io scheduler cfq registered (default)
[ 2.691464] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.691498] assign_interrupt_mode Found MSI capability
[ 2.691551] Allocate Port Service[0000:00:01.0:pcie00]
[ 2.691638] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.691672] assign_interrupt_mode Found MSI capability
[ 2.691720] Allocate Port Service[0000:00:1c.0:pcie00]
[ 2.691746] Allocate Port Service[0000:00:1c.0:pcie02]
[ 2.691863] isapnp: Scanning for PnP cards...
[ 3.044572] isapnp: No Plug & Play device found
[ 3.060926] Real Time Clock Driver v1.12ac
[ 3.061280] hpet_resources: 0xfed00000 is busy
[ 3.061287] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 3.061802] mice: PS/2 mouse device common for all mice
[ 3.062290] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3.062476] input: Macintosh mouse button emulation as /class/input/input0
[ 3.062554] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.062606] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.062872] PNP: No PS/2 controller found. Probing ports directly.
[ 3.065516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.065565] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.065689] EISA: Probing bus 0 at eisa.0
[ 3.065741] Cannot allocate resource for EISA slot 2
[ 3.065794] Cannot allocate resource for EISA slot 5
[ 3.065842] Cannot allocate resource for EISA slot 6
[ 3.065895] EISA: Detected 0 cards.
[ 3.095996] TCP cubic registered
[ 3.096044] NET: Registered protocol family 1
[ 3.096105] Starting balanced_irq
[ 3.096152] Using IPI No-Shortcut mode
[ 3.096267] ACPI: (supports S0 S1 S3 S4 S5)
[ 3.096455] Magic number: 11:430:183
[ 3.096517] hash matches device ttyr9
[ 3.096776] Freeing unused kernel memory: 328k freed
[ 3.098674] Time: tsc clocksource has been installed.
[ 4.285065] Capability LSM initialized
[ 4.326492] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 4.326499] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 4.587237] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 4.587241] Copyright (c) 1999-2006 Intel Corporation.
[ 4.587276] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 4.587287] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 4.599292] usbcore: registered new interface driver usbfs
[ 4.599310] usbcore: registered new interface driver hub
[ 4.599328] usbcore: registered new device driver usb
[ 4.599913] USB Universal Host Controller Interface driver v3.0
[ 4.627803] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:0c:b1:01
[ 4.658562] SCSI subsystem initialized
[ 4.681657] libata version 2.20 loaded.
[ 4.682582] ieee1394: Initialized config rom entry `ip1394'
[ 4.682623] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 4.683560] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.690931] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
[ 4.690943] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 4.690946] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.691111] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.691138] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.691143] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 4.691151] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdfddac00
[ 4.695043] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.695367] usb usb1: configuration #1 chosen from 1 choice
[ 4.695473] hub 1-0:1.0: USB hub found
[ 4.695478] hub 1-0:1.0: 4 ports detected
[ 4.733510] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[dfafb800-dfafbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.799913] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 4.799923] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.799927] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.800009] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.800035] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.800040] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.800047] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xff980800
[ 4.803916] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.804215] usb usb2: configuration #1 chosen from 1 choice
[ 4.804320] hub 2-0:1.0: USB hub found
[ 4.804325] hub 2-0:1.0: 6 ports detected
[ 4.909345] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.909357] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 4.909360] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.909379] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.909403] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 4.909471] usb usb3: configuration #1 chosen from 1 choice
[ 4.909490] hub 3-0:1.0: USB hub found
[ 4.909496] hub 3-0:1.0: 2 ports detected
[ 5.013419] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 21
[ 5.013431] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 5.013435] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.013458] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.013484] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000ff00
[ 5.013567] usb usb4: configuration #1 chosen from 1 choice
[ 5.013600] hub 4-0:1.0: USB hub found
[ 5.013605] hub 4-0:1.0: 2 ports detected
[ 5.117923] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 5.117935] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.117939] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.117962] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.117985] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ff80
[ 5.118068] usb usb5: configuration #1 chosen from 1 choice
[ 5.118098] hub 5-0:1.0: USB hub found
[ 5.118102] hub 5-0:1.0: 2 ports detected
[ 5.149989] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 5.222493] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
[ 5.222502] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.222506] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.222526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.222547] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ff60
[ 5.222632] usb usb6: configuration #1 chosen from 1 choice
[ 5.222658] hub 6-0:1.0: USB hub found
[ 5.222674] hub 6-0:1.0: 2 ports detected
[ 5.327576] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.327587] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.327591] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.327613] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.327636] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 5.327723] usb usb7: configuration #1 chosen from 1 choice
[ 5.327754] hub 7-0:1.0: USB hub found
[ 5.327758] hub 7-0:1.0: 2 ports detected
[ 5.356773] usb 2-2: configuration #1 chosen from 1 choice
[ 5.432584] ahci 0000:00:1f.2: version 2.1
[ 5.432605] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 6.004833] ieee1394: Host added: ID:BUS[0-00:1023] GUID[80d1190001b10c00]
[ 6.278321] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 6.435984] ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0x3) don't match
[ 6.435997] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 6.436002] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 6.436006] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 6.436098] ata1: SATA max UDMA/133 cmd 0xf895c100 ctl 0x00000000 bmdma 0x00000000 irq 22
[ 6.436166] ata2: SATA max UDMA/133 cmd 0xf895c180 ctl 0x00000000 bmdma 0x00000000 irq 22
[ 6.436175] scsi0 : ahci
[ 6.454119] usb 6-1: configuration #1 chosen from 1 choice
[ 6.693590] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 6.871952] usb 6-2: configuration #1 chosen from 1 choice
[ 6.919898] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.920447] ata1.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250
[ 6.920452] ata1.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133
[ 6.920455] ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.921045] ata1.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250
[ 6.921048] ata1.00: configured for UDMA/133
[ 6.921057] scsi1 : ahci
[ 7.113100] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 7.286919] usb 7-2: configuration #1 chosen from 1 choice
[ 7.289977] usbcore: registered new interface driver libusual
[ 7.292578] Initializing USB Mass Storage driver...
[ 7.292636] usbcore: registered new interface driver hiddev
[ 7.292642] scsi2 : SCSI emulation for USB Mass Storage devices
[ 7.292680] usb-storage: device found at 2
[ 7.292682] usb-storage: waiting for device to settle before scanning
[ 7.292690] usbcore: registered new interface driver usb-storage
[ 7.292692] USB Mass Storage support registered.
[ 7.307826] input: Dell Dell USB Keyboard as /class/input/input1
[ 7.307837] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1
[ 7.320753] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 7.320774] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 7.320788] usbcore: registered new interface driver usbhid
[ 7.320792] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 7.407684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.581807] ata2.00: ATAPI, max UDMA/33
[ 7.581810] ata2.00: applying bridge limits
[ 7.648513] ata2.00: failed to set xfermode (err_mask=0x101)
[ 7.648516] ata2: failed to recover some devices, retrying in 5 secs
[ 12.294675] usb-storage: device scan complete
[ 12.299062] scsi 2:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0
[ 12.302429] scsi 2:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
[ 12.306427] scsi 2:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
[ 12.309676] scsi 2:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
[ 12.319823] sd 2:0:0:0: Attached scsi removable disk sda
[ 12.324563] sd 2:0:0:1: Attached scsi removable disk sdb
[ 12.329056] sd 2:0:0:2: Attached scsi removable disk sdc
[ 12.378798] sd 2:0:0:3: Attached scsi removable disk sdd
[ 12.381571] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 12.381587] sd 2:0:0:1: Attached scsi generic sg1 type 0
[ 12.381601] sd 2:0:0:2: Attached scsi generic sg2 type 0
[ 12.381617] sd 2:0:0:3: Attached scsi generic sg3 type 0
[ 20.128569] ata2: port is slow to respond, please be patient (Status 0x80)
[ 43.152805] ata2: port failed to respond (30 secs, Status 0x80)
[ 43.152809] ata2: COMRESET failed (device not ready)
[ 43.152813] ata2: hardreset failed, retrying in 5 secs
[ 48.747447] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 48.901162] ata2.00: failed to set xfermode (err_mask=0x101)
[ 48.901167] ata2.00: limiting speed to UDMA/33:PIO3
[ 48.901168] ata2: failed to recover some devices, retrying in 5 secs
[ 61.392035] ata2: port is slow to respond, please be patient (Status 0x80)
[ 84.412348] ata2: port failed to respond (30 secs, Status 0x80)
[ 84.412352] ata2: COMRESET failed (device not ready)
[ 84.412356] ata2: hardreset failed, retrying in 5 secs
[ 90.002642] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 90.160911] ata2.00: failed to set xfermode (err_mask=0x101)
[ 90.160914] ata2.00: disabled
[ 90.663908] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
[ 90.664173] SCSI device sde: 488281250 512-byte hdwr sectors (250000 MB)
[ 90.664182] sde: Write Protect is off
[ 90.664183] sde: Mode Sense: 00 3a 00 00
[ 90.664194] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 90.664228] SCSI device sde: 488281250 512-byte hdwr sectors (250000 MB)
[ 90.664235] sde: Write Protect is off
[ 90.664237] sde: Mode Sense: 00 3a 00 00
[ 90.664247] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 90.664250] sde: sde1 sde2 sde3 < sde5 sde6 sde7 > sde4
[ 90.724313] sd 0:0:0:0: Attached scsi disk sde
[ 90.724473] sd 0:0:0:0: Attached scsi generic sg4 type 0
[ 91.052168] Attempting manual resume
[ 91.052171] swsusp: Resume From Partition 8:70
[ 91.052172] PM: Checking swsusp image.
[ 91.052276] PM: Resume from disk failed.
[ 91.090185] kjournald starting. Commit interval 5 seconds
[ 91.090209] EXT3-fs: mounted filesystem with ordered data mode.
[ 97.055136] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[ 97.055921] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 97.055924] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 97.845841] Linux agpgart interface v0.102 (c) Dave Jones
[ 97.911359] agpgart: Detected an Intel 965G Chipset.
[ 97.911789] agpgart: Unknown page table size, assuming 512KB
[ 97.911793] agpgart: Detected 7676K stolen memory.
[ 97.923452] agpgart: AGP aperture is 256M @ 0xc0000000
[ 97.959383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 97.996097] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 98.008124] input: PC Speaker as /class/input/input3
[ 98.110056] iTCO_vendor_support: vendor-support=0
[ 98.134346] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 98.134908] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 98.134915] iTCO_wdt: No card detected
[ 98.223309] NET: Registered protocol family 17
[ 98.280013] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 98.280028] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 98.937448] lp: driver loaded but no devices found
[ 98.986289] fuse init (API version 7.8)
[ 99.063244] Adding 524236k swap on /dev/disk/by-uuid/0447d996-ba41-4845-9d72-1c515ed47375. Priority:-1 extents:1 across:524236k
[ 99.239896] EXT3 FS on sde7, internal journal
[ 101.185459] input: Power Button (FF) as /class/input/input4
[ 101.185488] ACPI: Power Button (FF) [PWRF]
[ 101.185520] input: Power Button (CM) as /class/input/input5
[ 101.185538] ACPI: Power Button (CM) [VBTN]
[ 101.215192] Using specific hotkey driver
[ 101.248619] No dock devices found.
[ 101.305280] ibm_acpi: ec object not found
[ 101.406421] pcc_acpi: loading...
[ 102.363666] NET: Registered protocol family 10
[ 102.363748] lo: Disabled Privacy Extensions
[ 105.145375] [drm] Initialized drm 1.1.0 20060810
[ 105.147515] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 105.147912] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 105.152672] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 105.838053] ppdev: user-space parallel port driver
[ 110.157365] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 110.157368] apm: disabled - APM is not SMP safe.
[ 117.577620] eth0: no IPv6 routers present
usplash spending a lot of CPU
the time taken for booting with splash is 03.20 minutes
without splash it takes just 00.40 minutes