[ 0.000000] Bootdata ok (command line is root=/dev/sda5 ro quiet splash) [ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f6dc0 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff3000 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff3040 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff7bc0 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000003fff7b40 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000 [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] On node 0 totalpages: 257097 [ 0.000000] DMA zone: 2592 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 48000000 (gap: 40000000:80000000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ e460000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda5 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 0.000000] time.c: Detected 1809.292 MHz processor. [ 21.378652] Console: colour VGA+ 80x25 [ 21.379264] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.380197] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 21.390017] Memory: 1021068k/1048512k available (2129k kernel code, 27056k reserved, 1424k data, 188k init) [ 21.467791] Calibrating delay using timer specific routine.. 3620.79 BogoMIPS (lpj=7241598) [ 21.467847] Security Framework v1.0.0 initialized [ 21.467853] SELinux: Disabled at boot. [ 21.467874] Mount-cache hash table entries: 256 [ 21.468010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.468013] CPU: L2 Cache: 512K (64 bytes/line) [ 21.468017] CPU 0/0(1) -> Node 0 -> Core 0 [ 21.468030] SMP alternatives: switching to UP code [ 21.468139] Freeing SMP alternatives: 20k freed [ 21.468269] checking if image is initramfs... it is [ 22.002916] Freeing initrd memory: 5659k freed [ 22.006232] ACPI: Core revision 20060707 [ 22.008562] ACPI: Looking for DSDT ... not found! [ 22.051780] Using local APIC timer interrupts. [ 22.106958] result 12564536 [ 22.106960] Detected 12.564 MHz APIC timer. [ 22.110766] Brought up 1 CPUs [ 22.110788] testing NMI watchdog ... OK. [ 22.150788] migration_cost=0 [ 22.151024] NET: Registered protocol family 16 [ 22.151050] ACPI: bus type pci registered [ 22.154702] PCI: Using MMCONFIG at c0000000 [ 22.154722] PCI: No mmconfig possible on device 0:18 [ 22.161167] ACPI: Interpreter enabled [ 22.161170] ACPI: Using IOAPIC for interrupt routing [ 22.161703] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.161706] PCI: Probing PCI hardware (bus 00) [ 22.165256] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0 [ 22.165538] PCI: Transparent bridge - 0000:00:09.0 [ 22.165728] Boot video device is 0000:05:00.0 [ 22.165817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.233085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 22.234984] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.235301] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.235611] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 22.235921] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 22.236232] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.236542] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 22.236853] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.237165] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 22.237479] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.237791] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.238101] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 22.238411] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 22.238726] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.239047] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 22.239373] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 22.239699] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 22.240059] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 22.240413] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 22.240766] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 22.241121] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 22.241388] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 22.241758] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 22.242131] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 22.242525] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 22.242893] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 22.243261] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 22.243628] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 22.243995] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 22.244363] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 22.244744] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 22.245121] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 22.245499] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 22.248321] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.248330] pnp: PnP ACPI init [ 22.253570] pnp: PnP ACPI: found 13 devices [ 22.253617] PCI: Using ACPI for IRQ routing [ 22.253622] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.253747] PCI-DMA: Disabling IOMMU. [ 22.254131] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved [ 22.254135] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved [ 22.254139] pnp: 00:00: ioport range 0x1400-0x147f has been reserved [ 22.254143] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved [ 22.254146] pnp: 00:00: ioport range 0x1800-0x187f has been reserved [ 22.254150] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved [ 22.254329] PCI: Bridge: 0000:00:09.0 [ 22.254332] IO window: 9000-9fff [ 22.254335] MEM window: f0000000-f00fffff [ 22.254337] PREFETCH window: disabled. [ 22.254340] PCI: Bridge: 0000:00:0b.0 [ 22.254343] IO window: 6000-6fff [ 22.254345] MEM window: disabled. [ 22.254347] PREFETCH window: disabled. [ 22.254350] PCI: Bridge: 0000:00:0c.0 [ 22.254352] IO window: 8000-8fff [ 22.254354] MEM window: disabled. [ 22.254356] PREFETCH window: disabled. [ 22.254359] PCI: Bridge: 0000:00:0d.0 [ 22.254361] IO window: 7000-7fff [ 22.254363] MEM window: disabled. [ 22.254365] PREFETCH window: disabled. [ 22.254369] PCI: Bridge: 0000:00:0e.0 [ 22.254371] IO window: a000-afff [ 22.254375] MEM window: d0000000-efffffff [ 22.254378] PREFETCH window: 48000000-480fffff [ 22.254384] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 22.254391] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 22.254396] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 22.254401] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 22.254406] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 22.254471] NET: Registered protocol family 2 [ 22.290475] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 22.290692] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 22.291953] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 22.292584] TCP: Hash tables configured (established 131072 bind 65536) [ 22.292587] TCP reno registered [ 22.292913] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 22.293244] audit: initializing netlink socket (disabled) [ 22.293253] audit(1161516628.920:1): initialized [ 22.293394] VFS: Disk quotas dquot_6.5.1 [ 22.293413] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 22.293457] Initializing Cryptographic API [ 22.293461] io scheduler noop registered [ 22.293468] io scheduler anticipatory registered [ 22.293475] io scheduler deadline registered [ 22.293491] io scheduler cfq registered (default) [ 22.293904] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 22.293908] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 22.293922] assign_interrupt_mode Found MSI capability [ 22.293953] Allocate Port Service[0000:00:0b.0:pcie00] [ 22.293988] Allocate Port Service[0000:00:0b.0:pcie03] [ 22.294018] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 22.294021] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 22.294034] assign_interrupt_mode Found MSI capability [ 22.294050] Allocate Port Service[0000:00:0c.0:pcie00] [ 22.294077] Allocate Port Service[0000:00:0c.0:pcie03] [ 22.294106] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 22.294109] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 22.294122] assign_interrupt_mode Found MSI capability [ 22.294138] Allocate Port Service[0000:00:0d.0:pcie00] [ 22.294166] Allocate Port Service[0000:00:0d.0:pcie03] [ 22.294196] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 22.294199] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 22.294211] assign_interrupt_mode Found MSI capability [ 22.294226] Allocate Port Service[0000:00:0e.0:pcie00] [ 22.294252] Allocate Port Service[0000:00:0e.0:pcie03] [ 22.313793] Real Time Clock Driver v1.12ac [ 22.313831] Linux agpgart interface v0.101 (c) Dave Jones [ 22.313834] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.313941] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.314055] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 22.314496] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.314663] mice: PS/2 mouse device common for all mice [ 22.315136] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.315320] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 22.315324] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 22.315507] PNP: No PS/2 controller found. Probing ports directly. [ 22.848463] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.848736] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.848952] TCP bic registered [ 22.848961] NET: Registered protocol family 1 [ 22.848967] NET: Registered protocol family 8 [ 22.848969] NET: Registered protocol family 20 [ 22.849611] ACPI: (supports S0 S3 S4 S5) [ 22.849657] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.849678] Freeing unused kernel memory: 188k freed [ 23.494758] input: AT Translated Set 2 keyboard as /class/input/input0 [ 23.527770] vga16fb: initializing [ 23.527776] vga16fb: mapped to 0xffff8100000a0000 [ 23.632561] Console: switching to colour frame buffer device 80x25 [ 23.632566] fb0: VGA16 VGA frame buffer device [ 24.704459] Capability LSM initialized [ 24.735192] ACPI: Processor [CPU0] (supports 8 throttling states) [ 25.063419] SCSI subsystem initialized [ 25.067105] libata version 1.20 loaded. [ 25.068187] sata_nv 0000:00:07.0: version 0.8 [ 25.068673] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 25.068679] GSI 16 sharing vector 0xD9 and IRQ 16 [ 25.068683] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217 [ 25.068776] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 25.068842] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 217 [ 25.068859] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 217 [ 25.273308] ata1: SATA link down (SStatus 0) [ 25.273313] scsi0 : sata_nv [ 25.480950] ata2: SATA link down (SStatus 0) [ 25.480954] scsi1 : sata_nv [ 25.481910] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 25.481916] GSI 17 sharing vector 0xE1 and IRQ 17 [ 25.481919] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225 [ 25.482021] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 25.482069] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE000 irq 225 [ 25.482087] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE008 irq 225 [ 25.688595] ata3: SATA link up 1.5 Gbps (SStatus 113) [ 25.852416] ata3: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f [ 25.852420] ata3: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA [ 25.852573] nv_sata: Primary device added [ 25.852576] nv_sata: Primary device removed [ 25.852577] nv_sata: Secondary device added [ 25.852579] nv_sata: Secondary device removed [ 25.864386] ata3: dev 0 configured for UDMA/133 [ 25.864389] scsi2 : sata_nv [ 26.071939] ata4: SATA link down (SStatus 0) [ 26.071943] scsi3 : sata_nv [ 26.072495] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 [ 26.072503] Type: Direct-Access ANSI SCSI revision: 05 [ 26.074186] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 26.074204] NFORCE-CK804: chipset revision 162 [ 26.074207] NFORCE-CK804: not 100% native mode: will probe irqs later [ 26.074211] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller [ 26.074220] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 26.074228] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 26.074235] Probing IDE interface ide0... [ 26.089014] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [ 26.089025] sda: Write Protect is off [ 26.089028] sda: Mode Sense: 00 3a 00 00 [ 26.089040] SCSI device sda: drive cache: write back [ 26.089085] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) [ 26.089093] sda: Write Protect is off [ 26.089095] sda: Mode Sense: 00 3a 00 00 [ 26.089107] SCSI device sda: drive cache: write back [ 26.089112] sda: sda1 < sda5 sda6 sda7 > [ 26.136078] sd 2:0:0:0: Attached scsi disk sda [ 26.810756] hda: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive [ 27.481731] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 27.483069] Probing IDE interface ide1... [ 28.220333] hdc: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive [ 28.903960] ide1 at 0x170-0x177,0x376 on irq 15 [ 28.923941] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 28.923950] Uniform CD-ROM driver Revision: 3.20 [ 28.926864] hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33) [ 29.131153] usbcore: registered new driver usbfs [ 29.131175] usbcore: registered new driver hub [ 29.131975] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 29.132387] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 29.132393] GSI 18 sharing vector 0xE9 and IRQ 18 [ 29.132396] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233 [ 29.132483] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 29.132488] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 29.132605] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 29.191988] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. [ 29.192513] ohci_hcd 0000:00:02.0: irq 233, io mem 0xf0103000 [ 29.209337] ieee1394: Initialized config rom entry `ip1394' [ 29.252662] usb usb1: configuration #1 chosen from 1 choice [ 29.252767] hub 1-0:1.0: USB hub found [ 29.252778] hub 1-0:1.0: 10 ports detected [ 29.358835] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 29.358840] GSI 19 sharing vector 0x32 and IRQ 19 [ 29.358843] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50 [ 29.358935] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 29.358940] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 29.359135] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 29.359162] ehci_hcd 0000:00:02.1: debug port 1 [ 29.359165] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 29.359176] ehci_hcd 0000:00:02.1: irq 50, io mem 0xf0105000 [ 29.359181] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.359310] usb usb2: configuration #1 chosen from 1 choice [ 29.359408] hub 2-0:1.0: USB hub found [ 29.359416] hub 2-0:1.0: 10 ports detected [ 29.474816] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 29.474821] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217 [ 29.474827] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 29.474836] forcedeth: using HIGHDMA [ 29.997738] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 [ 29.998495] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 29.998501] GSI 20 sharing vector 0x3A and IRQ 20 [ 29.998505] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58 [ 30.048877] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[f0004000-f00047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 30.113555] Attempting manual resume [ 30.142125] kjournald starting. Commit interval 5 seconds [ 30.142135] EXT3-fs: mounted filesystem with ordered data mode. [ 30.352613] usb 1-8: new low speed USB device using ohci_hcd and address 2 [ 30.590254] usb 1-8: configuration #1 chosen from 1 choice [ 30.899677] usb 1-10: new low speed USB device using ohci_hcd and address 3 [ 31.106365] usb 1-10: configuration #1 chosen from 1 choice [ 31.319135] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea560076344c] [ 38.473439] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.476147] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.718085] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 38.718114] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 38.726849] input: PC Speaker as /class/input/input1 [ 39.644187] gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0x9400, speed 1200kHz [ 39.771762] parport: PnPBIOS parport detected. [ 39.771802] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 39.872676] Floppy drive(s): fd0 is 1.44M [ 39.895886] FDC 0 is a post-1991 82077 [ 39.903580] usbcore: registered new driver hiddev [ 39.919239] input: USB Keyboard as /class/input/input2 [ 39.919264] input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:02.0-8 [ 39.946184] input: USB Keyboard as /class/input/input3 [ 39.946210] input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:02.0-8 [ 39.954175] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4 [ 39.954210] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-10 [ 39.954224] usbcore: registered new driver usbhid [ 39.954228] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 40.039729] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 40.230703] irda_init() [ 40.230721] NET: Registered protocol family 23 [ 40.261643] ts: Compaq touchscreen protocol output [ 40.375447] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 40.375453] GSI 21 sharing vector 0x42 and IRQ 21 [ 40.375457] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 66 [ 40.655881] lp0: using parport0 (interrupt-driven). [ 40.697897] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 40.697901] ieee1394: sbp2: Try serialize_io=0 for better performance [ 40.732401] Adding 3381640k swap on /dev/disk/by-uuid/d9aab1d3-4ac4-427f-99bf-fbdb99c19932. Priority:-1 extents:1 across:3381640k [ 40.813100] EXT3 FS on sda5, internal journal [ 41.016262] kjournald starting. Commit interval 5 seconds [ 41.026539] EXT3 FS on sda6, internal journal [ 41.026543] EXT3-fs: mounted filesystem with ordered data mode. [ 42.277665] NET: Registered protocol family 17 [ 47.949409] ACPI: Power Button (FF) [PWRF] [ 47.949419] ACPI: Power Button (CM) [PWRB] [ 48.042662] ibm_acpi: ec object not found [ 48.072734] pcc_acpi: loading... [ 48.329489] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) [ 48.329596] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) [ 48.329599] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) [ 48.329604] cpu_init done, current fid 0xa, vid 0x6 [ 50.232392] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 50.237177] [fglrx] Maximum main memory to use for locked dma buffers: 920 MBytes. [ 50.237412] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0 [ 50.359927] NET: Registered protocol family 10 [ 50.360025] lo: Disabled Privacy Extensions [ 50.360373] IPv6 over IPv4 tunneling driver [ 50.385225] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58 [ 51.918496] [fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option [ 51.918505] [fglrx] Maximum main memory to use for locked dma buffers: 920 MBytes. [ 51.928407] [fglrx] total GART = 134217728 [ 51.928412] [fglrx] free GART = 118226944 [ 51.928415] [fglrx] max single GART = 118226944 [ 51.928418] [fglrx] total LFB = 260960256 [ 51.928420] [fglrx] free LFB = 250474496 [ 51.928422] [fglrx] max single LFB = 250474496 [ 51.928424] [fglrx] total Inv = 0 [ 51.928426] [fglrx] free Inv = 0 [ 51.928428] [fglrx] max single Inv = 0 [ 51.928429] [fglrx] total TIM = 0 [ 56.527014] Bluetooth: Core ver 2.8 [ 56.527019] NET: Registered protocol family 31 [ 56.527021] Bluetooth: HCI device and connection manager initialized [ 56.527035] Bluetooth: HCI socket layer initialized [ 56.559213] Bluetooth: L2CAP ver 2.8 [ 56.559217] Bluetooth: L2CAP socket layer initialized [ 56.563309] Bluetooth: RFCOMM socket layer initialized [ 56.563323] Bluetooth: RFCOMM TTY layer initialized [ 56.563326] Bluetooth: RFCOMM ver 1.7 [ 59.431290] eth0: no IPv6 routers present