[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-37-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #81-Ubuntu SMP Fri Dec 2 20:35:14 UTC 2011 (Ubuntu 2.6.32-37.81-generic 2.6.32.49+drm33.21) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009fff0000 (usable) [ 0.000000] BIOS-e820: 000000009fff0000 - 000000009fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009fff3000 - 00000000a0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x9fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FFE000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000009fff0000 (usable) [ 0.000000] modified: 000000009fff0000 - 000000009fff3000 (ACPI NVS) [ 0.000000] modified: 000000009fff3000 - 00000000a0000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3784e000 - 37fefaa6 [ 0.000000] Allocated new RAMDISK: 008e5000 - 01086aa6 [ 0.000000] Move RAMDISK from 000000003784e000 - 0000000037fefaa5 to 008e5000 - 01086aa5 [ 0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 9fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 9fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 9fff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 9fff0000 00040 [ 0.000000] ACPI: APIC 9fff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1671MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0f18] TEXT DATA BSS ==> [0000100000 - 00008e0f18] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008e1000 - 00008e4119] BRK ==> [00008e1000 - 00008e4119] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e5000 - 0001086aa6] NEW RAMDISK ==> [00008e5000 - 0001086aa6] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0009fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0009fff0 [ 0.000000] On node 0 totalpages: 655231 [ 0.000000] free_area_init_node: node 0, pgdat c079a800, node_mem_map c1088200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3344 pages used for memmap [ 0.000000] HighMem zone: 424674 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36312 r0 d21032 u4194304 [ 0.000000] pcpu-alloc: s36312 r0 d21032 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650111 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-37-generic root=UUID=eb012ed8-7d0d-46db-bd96-c1c32c062298 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 13106560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fff0) [ 0.000000] Memory: 2569984k/2621376k available (4680k kernel code, 50096k reserved, 2122k data, 668k init, 1712072k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB) [ 0.000000] .data : 0xc0592207 - 0xc07a4dc8 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0592207 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1921.363 MHz processor. [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3842.72 BogoMIPS (lpj=7685452) [ 0.008031] Security Framework initialized [ 0.008065] AppArmor: AppArmor initialized [ 0.008074] Mount-cache hash table entries: 512 [ 0.008248] Initializing cgroup subsys ns [ 0.008253] Initializing cgroup subsys cpuacct [ 0.008258] Initializing cgroup subsys memory [ 0.008271] Initializing cgroup subsys devices [ 0.008274] Initializing cgroup subsys freezer [ 0.008277] Initializing cgroup subsys net_cls [ 0.008303] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008307] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008312] mce: CPU supports 4 MCE banks [ 0.008333] Performance Events: AMD PMU driver. [ 0.008341] ... version: 0 [ 0.008344] ... bit width: 48 [ 0.008346] ... generic registers: 4 [ 0.008348] ... value mask: 0000ffffffffffff [ 0.008351] ... max period: 00007fffffffffff [ 0.008353] ... fixed-purpose events: 0 [ 0.008355] ... event mask: 000000000000000f [ 0.008360] Checking 'hlt' instruction... OK. [ 0.024567] SMP alternatives: switching to UP code [ 0.030816] Freeing SMP alternatives: 19k freed [ 0.030842] ACPI: Core revision 20090903 [ 0.038444] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.038453] ftrace: allocating 21734 entries in 43 pages [ 0.040147] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040535] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.080914] CPU0: AMD Athlon(tm) XP 2600+ stepping 00 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3842.72 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 1:08:53 Date: 01/20/12 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.113329] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 [ 0.113332] PCI: Using configuration type 1 for base access [ 0.114471] bio: create slab at 0 [ 0.115374] ACPI: EC: Look up EC in DSDT [ 0.122030] ACPI: Interpreter enabled [ 0.122035] ACPI: (supports S0 S1 S4 S5) [ 0.122061] ACPI: Using IOAPIC for interrupt routing [ 0.130480] ACPI: No dock devices found. [ 0.130597] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.130647] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe1ffffff] [ 0.130665] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.130879] pci 0000:00:01.1: reg 10 io port: [0xe000-0xe01f] [ 0.130915] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.130920] pci 0000:00:01.1: PME# disabled [ 0.130953] pci 0000:00:02.0: reg 10 32bit mmio: [0xe8087000-0xe8087fff] [ 0.130989] pci 0000:00:02.0: supports D1 D2 [ 0.130992] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130996] pci 0000:00:02.0: PME# disabled [ 0.131024] pci 0000:00:02.1: reg 10 32bit mmio: [0xe8082000-0xe8082fff] [ 0.131059] pci 0000:00:02.1: supports D1 D2 [ 0.131062] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131066] pci 0000:00:02.1: PME# disabled [ 0.131100] pci 0000:00:02.2: reg 10 32bit mmio: [0xe8083000-0xe80830ff] [ 0.131142] pci 0000:00:02.2: supports D1 D2 [ 0.131145] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131150] pci 0000:00:02.2: PME# disabled [ 0.131184] pci 0000:00:04.0: reg 10 32bit mmio: [0xe8086000-0xe8086fff] [ 0.131191] pci 0000:00:04.0: reg 14 io port: [0xe400-0xe407] [ 0.131223] pci 0000:00:04.0: supports D1 D2 [ 0.131226] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131230] pci 0000:00:04.0: PME# disabled [ 0.131258] pci 0000:00:05.0: reg 10 32bit mmio: [0xe8000000-0xe807ffff] [ 0.131293] pci 0000:00:05.0: supports D1 D2 [ 0.131321] pci 0000:00:06.0: reg 10 io port: [0xd000-0xd0ff] [ 0.131327] pci 0000:00:06.0: reg 14 io port: [0xd400-0xd47f] [ 0.131334] pci 0000:00:06.0: reg 18 32bit mmio: [0xe8080000-0xe8080fff] [ 0.131363] pci 0000:00:06.0: supports D1 D2 [ 0.131430] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] [ 0.131481] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe8084000-0xe80847ff] [ 0.131487] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe8085000-0xe808503f] [ 0.131520] pci 0000:00:0d.0: supports D1 D2 [ 0.131523] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131527] pci 0000:00:0d.0: PME# disabled [ 0.131617] pci 0000:01:04.0: reg 10 32bit mmio: [0xe7000000-0xe7003fff] [ 0.131626] pci 0000:01:04.0: reg 14 io port: [0xa000-0xa0ff] [ 0.131655] pci 0000:01:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.131680] pci 0000:01:04.0: supports D1 D2 [ 0.131683] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131688] pci 0000:01:04.0: PME# disabled [ 0.131719] pci 0000:01:08.0: reg 10 32bit mmio: [0xe7004000-0xe7007fff] [ 0.131791] pci 0000:01:0b.0: reg 10 io port: [0xa400-0xa407] [ 0.131800] pci 0000:01:0b.0: reg 14 io port: [0xa800-0xa803] [ 0.131808] pci 0000:01:0b.0: reg 18 io port: [0xac00-0xac07] [ 0.131816] pci 0000:01:0b.0: reg 1c io port: [0xb000-0xb003] [ 0.131824] pci 0000:01:0b.0: reg 20 io port: [0xb400-0xb40f] [ 0.131832] pci 0000:01:0b.0: reg 24 32bit mmio: [0xe7008000-0xe70081ff] [ 0.131841] pci 0000:01:0b.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.131861] pci 0000:01:0b.0: supports D1 D2 [ 0.131897] pci 0000:00:08.0: bridge io port: [0xa000-0xbfff] [ 0.131902] pci 0000:00:08.0: bridge 32bit mmio: [0xe6000000-0xe7ffffff] [ 0.131938] pci 0000:03:00.0: reg 10 32bit mmio: [0xe3000000-0xe3ffffff] [ 0.131945] pci 0000:03:00.0: reg 14 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.131951] pci 0000:03:00.0: reg 18 32bit mmio: [0xe4000000-0xe4ffffff] [ 0.131968] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.132036] pci 0000:00:1e.0: bridge 32bit mmio: [0xe3000000-0xe5ffffff] [ 0.132041] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.132052] pci_bus 0000:00: on NUMA node 0 [ 0.132058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.132195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.132483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.189579] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.189735] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.189883] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.190029] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.190174] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.190321] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.190473] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.190619] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.190765] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.190911] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.191055] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.191202] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.191347] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.191498] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.191642] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.191788] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.191923] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.192055] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 0.192172] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 0.192289] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.192406] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.192579] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.192753] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 0.192926] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.193105] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 0.193279] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 0.193452] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.193572] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.193743] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.193916] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 0.194094] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.194274] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.194432] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.194435] vgaarb: loaded [ 0.194584] SCSI subsystem initialized [ 0.194684] libata version 3.00 loaded. [ 0.194789] usbcore: registered new interface driver usbfs [ 0.194806] usbcore: registered new interface driver hub [ 0.194844] usbcore: registered new device driver usb [ 0.195018] ACPI: WMI: Mapper loaded [ 0.195021] PCI: Using ACPI for IRQ routing [ 0.195211] NetLabel: Initializing [ 0.195214] NetLabel: domain hash size = 128 [ 0.195216] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.195233] NetLabel: unlabeled traffic allowed by default [ 0.195282] Switching to clocksource tsc [ 0.195996] AppArmor: AppArmor Filesystem Enabled [ 0.195996] pnp: PnP ACPI init [ 0.195996] ACPI: bus type pnp registered [ 0.200096] pnp: PnP ACPI: found 17 devices [ 0.200099] ACPI: ACPI bus type pnp unregistered [ 0.200104] PnPBIOS: Disabled by ACPI PNP [ 0.200119] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.200123] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.200127] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.200130] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.200134] system 00:00: ioport range 0x4200-0x427f has been reserved [ 0.200137] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 0.200144] system 00:01: ioport range 0x5000-0x503f has been reserved [ 0.200148] system 00:01: ioport range 0x5500-0x553f has been reserved [ 0.200156] system 00:02: iomem range 0xf0000-0xf3fff could not be reserved [ 0.200160] system 00:02: iomem range 0xf4000-0xf7fff could not be reserved [ 0.200163] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 0.200167] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 0.200171] system 00:02: iomem range 0x9fff0000-0x9fffffff could not be reserved [ 0.200175] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved [ 0.200179] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 0.200183] system 00:02: iomem range 0x100000-0x9ffeffff could not be reserved [ 0.200187] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.200191] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.200198] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.234956] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.234960] pci 0000:00:08.0: IO window: 0xa000-0xbfff [ 0.234967] pci 0000:00:08.0: MEM window: 0xe6000000-0xe7ffffff [ 0.234972] pci 0000:00:08.0: PREFETCH window: 0xa0000000-0xa00fffff [ 0.234980] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.234983] pci 0000:00:1e.0: IO window: disabled [ 0.234988] pci 0000:00:1e.0: MEM window: 0xe3000000-0xe5ffffff [ 0.234993] pci 0000:00:1e.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.235006] pci 0000:00:08.0: setting latency timer to 64 [ 0.235015] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.235019] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.235022] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff] [ 0.235025] pci_bus 0000:01: resource 1 mem: [0xe6000000-0xe7ffffff] [ 0.235029] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xa00fffff] [ 0.235032] pci_bus 0000:03: resource 1 mem: [0xe3000000-0xe5ffffff] [ 0.235035] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.235078] NET: Registered protocol family 2 [ 0.235194] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.235641] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.237062] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.237682] TCP: Hash tables configured (established 131072 bind 65536) [ 0.237686] TCP reno registered [ 0.237808] NET: Registered protocol family 1 [ 0.348706] pci 0000:03:00.0: Boot video device [ 0.348933] cpufreq-nforce2: Detected nForce2 chipset revision C1 [ 0.348936] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 0.348945] cpufreq-nforce2: FSB currently at 167 MHz, FID 11.5 [ 0.349005] Scanning for low memory corruption every 60 seconds [ 0.349139] audit: initializing netlink socket (disabled) [ 0.349153] type=2000 audit(1327021733.348:1): initialized [ 0.359329] Trying to unpack rootfs image as initramfs... [ 0.372944] highmem bounce pool size: 64 pages [ 0.372957] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.374879] VFS: Disk quotas dquot_6.5.2 [ 0.374955] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.375653] fuse init (API version 7.13) [ 0.375758] msgmni has been set to 1677 [ 0.380849] alg: No test for stdrng (krng) [ 0.380924] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.380928] io scheduler noop registered [ 0.380931] io scheduler anticipatory registered [ 0.380933] io scheduler deadline registered [ 0.380996] io scheduler cfq registered (default) [ 0.381151] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.381180] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.381308] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.381314] ACPI: Power Button [PWRB] [ 0.381391] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.381394] ACPI: Power Button [PWRF] [ 0.381830] processor LNXCPU:00: registered as cooling_device0 [ 0.390612] isapnp: Scanning for PnP cards... [ 0.396400] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.396520] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.396651] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.396993] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.397139] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.398461] brd: module loaded [ 0.399029] loop: module loaded [ 0.399130] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.399361] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.399746] Fixed MDIO Bus: probed [ 0.399795] PPP generic driver version 2.4.2 [ 0.399843] tun: Universal TUN/TAP device driver, 1.6 [ 0.399845] tun: (C) 1999-2004 Max Krasnyansky [ 0.399944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.400292] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.400300] alloc irq_desc for 22 on node -1 [ 0.400302] alloc kstat_irqs on node -1 [ 0.400313] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22 [ 0.400334] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.400339] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.400382] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.400421] ehci_hcd 0000:00:02.2: debug port 1 [ 0.400430] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.400451] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe8083000 [ 0.448268] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.448448] usb usb1: configuration #1 chosen from 1 choice [ 0.448491] hub 1-0:1.0: USB hub found [ 0.448507] hub 1-0:1.0: 6 ports detected [ 0.448585] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.448957] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.448963] alloc irq_desc for 21 on node -1 [ 0.448966] alloc kstat_irqs on node -1 [ 0.448975] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21 [ 0.448996] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.449001] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.449049] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.449083] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe8087000 [ 0.538738] usb usb2: configuration #1 chosen from 1 choice [ 0.538778] hub 2-0:1.0: USB hub found [ 0.538799] hub 2-0:1.0: 3 ports detected [ 0.539225] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 0.539231] alloc irq_desc for 20 on node -1 [ 0.539234] alloc kstat_irqs on node -1 [ 0.539244] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20 [ 0.539265] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.539270] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.539321] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 0.539357] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe8082000 [ 0.630647] usb usb3: configuration #1 chosen from 1 choice [ 0.630690] hub 3-0:1.0: USB hub found [ 0.630706] hub 3-0:1.0: 3 ports detected [ 0.630782] uhci_hcd: USB Universal Host Controller Interface driver [ 0.630911] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.638525] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.638535] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.638769] mice: PS/2 mouse device common for all mice [ 0.638940] rtc_cmos 00:06: RTC can wake from S4 [ 0.638998] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.639026] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.639148] device-mapper: uevent: version 1.0.3 [ 0.643609] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.643710] device-mapper: multipath: version 1.1.0 loaded [ 0.643714] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.643879] EISA: Probing bus 0 at eisa.0 [ 0.643901] Cannot allocate resource for EISA slot 4 [ 0.643904] Cannot allocate resource for EISA slot 5 [ 0.643919] EISA: Detected 0 cards. [ 0.645896] cpuidle: using governor ladder [ 0.645900] cpuidle: using governor menu [ 0.646370] TCP cubic registered [ 0.646572] NET: Registered protocol family 10 [ 0.647422] NET: Registered protocol family 17 [ 0.647465] powernow-k8: Processor cpuid 6a0 not supported [ 0.647488] Using IPI No-Shortcut mode [ 0.647620] PM: Resume from disk failed. [ 0.647637] registered taskstats version 1 [ 0.647959] Magic number: 12:637:104 [ 0.647971] usbmon usbmon0: hash matches [ 0.648078] rtc_cmos 00:06: setting system clock to 2012-01-20 01:08:54 UTC (1327021734) [ 0.648082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.648084] EDD information not available. [ 0.664176] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.812264] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.902524] Freeing initrd memory: 7814k freed [ 0.998215] isapnp: No Plug & Play device found [ 0.998241] Freeing unused kernel memory: 668k freed [ 0.999073] Write protecting the kernel text: 4684k [ 0.999109] Write protecting the kernel read-only data: 1844k [ 1.014054] usb 1-2: configuration #1 chosen from 1 choice [ 1.024173] udev: starting version 151 [ 1.147990] Floppy drive(s): fd0 is 1.44M [ 1.259925] FDC 0 is a post-1991 82077 [ 1.296185] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.296532] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.296540] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22 [ 1.296547] forcedeth 0000:00:04.0: setting latency timer to 64 [ 1.296604] nv_probe: set workaround bit for reversed mac addr [ 1.332162] sata_sil 0000:01:0b.0: version 2.4 [ 1.332414] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.332422] alloc irq_desc for 18 on node -1 [ 1.332425] alloc kstat_irqs on node -1 [ 1.332434] sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 [ 1.332676] scsi0 : sata_sil [ 1.333682] scsi1 : sata_sil [ 1.333795] ata1: SATA max UDMA/100 mmio m512@0xe7008000 tf 0xe7008080 irq 18 [ 1.333801] ata2: SATA max UDMA/100 mmio m512@0xe7008000 tf 0xe70080c0 irq 18 [ 1.343982] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 1.343991] alloc irq_desc for 17 on node -1 [ 1.343993] alloc kstat_irqs on node -1 [ 1.344019] skge 0000:01:04.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17 [ 1.344074] skge 1.13 addr 0xe7000000 irq 17 chip Yukon-Lite rev 7 [ 1.344954] skge eth0: addr 00:11:2f:29:49:1b [ 1.345314] b43-pci-bridge 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 [ 1.349525] Initializing USB Mass Storage driver... [ 1.349672] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.349846] usbcore: registered new interface driver usb-storage [ 1.349850] USB Mass Storage support registered. [ 1.349954] usb-storage: device found at 2 [ 1.349956] usb-storage: waiting for device to settle before scanning [ 1.416102] ssb: Sonics Silicon Backplane found on PCI device 0000:01:08.0 [ 1.652043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.660633] ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133 [ 1.660637] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.676637] ata1.00: configured for UDMA/100 [ 1.676782] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5 [ 1.676977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.677270] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.677336] sd 0:0:0:0: [sda] Write Protect is off [ 1.677340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.677374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.677564] sda: sda1 sda2 < sda5 > [ 1.707929] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.817087] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:11:2f:29:53:45 [ 1.817092] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 1.817121] pata_amd 0000:00:09.0: version 0.4.1 [ 1.817190] pata_amd 0000:00:09.0: setting latency timer to 64 [ 1.817492] scsi3 : pata_amd [ 1.817626] scsi4 : pata_amd [ 1.818493] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.818497] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.818893] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 [ 1.818900] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21 [ 1.818906] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 1.874024] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[e8084000-e80847ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.992027] ata2: SATA link down (SStatus 0 SControl 310) [ 2.164338] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33 [ 2.164375] ata4.01: ATAPI: TSST CDW/DVD TS-H492A, TB02, max UDMA/33 [ 2.164403] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f) [ 2.164410] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f) [ 2.180274] ata4.00: configured for UDMA/33 [ 2.196271] ata4.01: configured for UDMA/33 [ 2.202711] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5 [ 2.215458] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.215463] Uniform CD-ROM driver Revision: 3.20 [ 2.215758] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.215919] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.216509] scsi 4:0:1:0: CD-ROM TSSTcorp CDW/DVD TS-H492A TB02 PQ: 0 ANSI: 5 [ 2.218492] sr1: scsi3-mmc drive: 5x/52x writer cd/rw xa/form2 cdda tray [ 2.218762] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 2.218914] sr 4:0:1:0: Attached scsi generic sg2 type 5 [ 2.581975] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.985470] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 3.256156] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000082cf92] [ 6.348192] usb-storage: device scan complete [ 6.349030] scsi 2:0:0:0: Direct-Access WD My Book 1110 1028 PQ: 0 ANSI: 4 [ 6.349820] scsi 2:0:0:1: CD-ROM WD Virtual CD 1110 1028 PQ: 0 ANSI: 4 [ 6.350513] scsi 2:0:0:2: Enclosure WD SES Device 1028 PQ: 0 ANSI: 4 [ 6.350553] scsi: killing requests for dead queue [ 6.350597] scsi: killing requests for dead queue [ 6.350643] scsi: killing requests for dead queue [ 6.350682] scsi: killing requests for dead queue [ 6.350721] scsi: killing requests for dead queue [ 6.350760] scsi: killing requests for dead queue [ 6.350798] scsi: killing requests for dead queue [ 6.350837] scsi: killing requests for dead queue [ 6.351104] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 6.353136] sr2: scsi3-mmc drive: 51x/51x caddy [ 6.353296] sr 2:0:0:1: Attached scsi CD-ROM sr2 [ 6.353352] sr 2:0:0:1: Attached scsi generic sg4 type 5 [ 6.353522] scsi 2:0:0:2: Attached scsi generic sg5 type 13 [ 6.353584] sd 2:0:0:0: [sdb] 1952151552 512-byte logical blocks: (999 GB/930 GiB) [ 6.355377] sd 2:0:0:0: [sdb] Write Protect is off [ 6.355381] sd 2:0:0:0: [sdb] Mode Sense: 23 00 10 00 [ 6.355385] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.357751] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.357756] sdb: [ 9.715795] Adding 48931832k swap on /dev/sda5. Priority:-1 extents:1 across:48931832k [ 9.721495] udev: starting version 151 [ 10.067561] i2c i2c-0: nForce2 SMBus adapter at 0x5000 [ 10.067591] i2c i2c-1: nForce2 SMBus adapter at 0x5500 [ 10.076245] Linux agpgart interface v0.103 [ 10.076324] parport_pc 00:0c: reported by Plug and Play ACPI [ 10.076395] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 10.125415] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.360589] ppdev: user-space parallel port driver [ 10.459367] type=1505 audit(1327021744.307:2): operation="profile_load" pid=594 name="/sbin/dhclient3" [ 10.459731] type=1505 audit(1327021744.307:3): operation="profile_load" pid=594 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.459940] type=1505 audit(1327021744.307:4): operation="profile_load" pid=594 name="/usr/lib/connman/scripts/dhclient-script" [ 10.740381] type=1505 audit(1327021744.591:5): operation="profile_load" pid=694 name="/usr/share/gdm/guest-session/Xsession" [ 10.743940] type=1505 audit(1327021744.591:6): operation="profile_replace" pid=695 name="/sbin/dhclient3" [ 10.744428] type=1505 audit(1327021744.595:7): operation="profile_replace" pid=695 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.744652] type=1505 audit(1327021744.595:8): operation="profile_replace" pid=695 name="/usr/lib/connman/scripts/dhclient-script" [ 10.775327] type=1505 audit(1327021744.623:9): operation="profile_load" pid=696 name="/usr/bin/evince" [ 10.784234] type=1505 audit(1327021744.635:10): operation="profile_load" pid=696 name="/usr/bin/evince-previewer" [ 10.794007] type=1505 audit(1327021744.643:11): operation="profile_load" pid=696 name="/usr/bin/evince-thumbnailer" [ 10.917771] eth1: no link during initialization. [ 10.920759] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.935853] skge eth0: enabling interface [ 10.945753] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.151225] lp0: using parport0 (interrupt-driven). [ 12.608713] skge eth0: Link is up at 100 Mbps, full duplex, flow control none [ 12.608957] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.895983] sdb1 < sdb5 > sdb2 [ 13.906734] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 13.906800] sd 2:0:0:0: [sdb] Attached SCSI disk [ 13.969454] ses 2:0:0:2: Attached Enclosure device [ 13.981095] agpgart: Detected NVIDIA nForce2 chipset [ 13.987814] cfg80211: Calling CRDA to update world regulatory domain [ 14.027775] agpgart-nvidia 0000:00:00.0: AGP aperture is 32M @ 0xe0000000 [ 14.046579] cfg80211: World regulatory domain updated: [ 14.046585] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.046589] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.046593] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.046596] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.046599] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.046602] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.080608] vga16fb: initializing [ 14.080624] vga16fb: mapped to 0xc00a0000 [ 14.080994] fb0: VGA16 VGA frame buffer device [ 14.092784] gameport: NS558 PnP Gameport is pnp00:10/gameport0, io 0x201, speed 59659kHz [ 14.174665] psmouse serio1: ID: 10 00 64 [ 14.202825] nvidia: module license 'NVIDIA' taints kernel. [ 14.202831] Disabling lock debugging due to kernel taint [ 14.795690] b43-phy0: Broadcom 4321 WLAN found (core revision 11) [ 15.012055] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 5, Type 4, Revision 1) [ 15.012090] b43: probe of ssb0:0 failed with error -95 [ 15.012142] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 15.175122] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [ 15.175130] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20 [ 15.175178] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 15.369030] Console: switching to colour frame buffer device 80x30 [ 15.380286] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 15.380295] alloc irq_desc for 19 on node -1 [ 15.380298] alloc kstat_irqs on node -1 [ 15.380308] nvidia 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [ 15.380319] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 15.381921] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010 [ 15.531541] input: PS/2 Logitech TrackMan as /devices/platform/i8042/serio1/input/input4 [ 15.552346] intel8x0_measure_ac97_clock: measured 54346 usecs (2640 samples) [ 15.552351] intel8x0: clocking to 47429 [ 16.626124] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge [ 16.626141] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode [ 16.626211] nvidia 0000:03:00.0: putting AGP V3 device into 8x mode [ 22.924023] eth0: no IPv6 routers present [ 23.824838] UDF-fs: Partition marked readonly; forcing readonly mount [ 23.840066] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/08/18 19:52 (1ed4) [ 75.922973] ondemand governor failed, too long transition latency of HW, fallback to performance governor