[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-31-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #61-Ubuntu SMP Fri Apr 8 18:24:35 UTC 2011 (Ubuntu 2.6.32-31.61-generic 2.6.32.32+drm33.14) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b727c000 (usable) [ 0.000000] BIOS-e820: 00000000b727c000 - 00000000b7282000 (reserved) [ 0.000000] BIOS-e820: 00000000b7282000 - 00000000b73ee000 (usable) [ 0.000000] BIOS-e820: 00000000b73ee000 - 00000000b740f000 (reserved) [ 0.000000] BIOS-e820: 00000000b740f000 - 00000000b746f000 (usable) [ 0.000000] BIOS-e820: 00000000b746f000 - 00000000b7470000 (reserved) [ 0.000000] BIOS-e820: 00000000b7470000 - 00000000b74f1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b74f1000 - 00000000b770f000 (reserved) [ 0.000000] BIOS-e820: 00000000b770f000 - 00000000b7717000 (usable) [ 0.000000] BIOS-e820: 00000000b7717000 - 00000000b771f000 (reserved) [ 0.000000] BIOS-e820: 00000000b771f000 - 00000000b7780000 (usable) [ 0.000000] BIOS-e820: 00000000b7780000 - 00000000b779f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b779f000 - 00000000b77e2000 (usable) [ 0.000000] BIOS-e820: 00000000b77e2000 - 00000000b77ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b77ff000 - 00000000b7800000 (usable) [ 0.000000] BIOS-e820: 00000000b7800000 - 00000000bc000000 (reserved) [ 0.000000] BIOS-e820: 00000000f7fff000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fc804000 - 00000000fc805000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb7800 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable) [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b727c000 (usable) [ 0.000000] modified: 00000000b727c000 - 00000000b7282000 (reserved) [ 0.000000] modified: 00000000b7282000 - 00000000b73ee000 (usable) [ 0.000000] modified: 00000000b73ee000 - 00000000b740f000 (reserved) [ 0.000000] modified: 00000000b740f000 - 00000000b746f000 (usable) [ 0.000000] modified: 00000000b746f000 - 00000000b7470000 (reserved) [ 0.000000] modified: 00000000b7470000 - 00000000b74f1000 (ACPI NVS) [ 0.000000] modified: 00000000b74f1000 - 00000000b770f000 (reserved) [ 0.000000] modified: 00000000b770f000 - 00000000b7717000 (usable) [ 0.000000] modified: 00000000b7717000 - 00000000b771f000 (reserved) [ 0.000000] modified: 00000000b771f000 - 00000000b7780000 (usable) [ 0.000000] modified: 00000000b7780000 - 00000000b779f000 (ACPI NVS) [ 0.000000] modified: 00000000b779f000 - 00000000b77e2000 (usable) [ 0.000000] modified: 00000000b77e2000 - 00000000b77ff000 (ACPI data) [ 0.000000] modified: 00000000b77ff000 - 00000000b7800000 (usable) [ 0.000000] modified: 00000000b7800000 - 00000000bc000000 (reserved) [ 0.000000] modified: 00000000f7fff000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fc804000 - 00000000fc805000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37857000 - 37fefa33 [ 0.000000] Allocated new RAMDISK: 008e6000 - 0107ea33 [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fefa32 to 008e6000 - 0107ea32 [ 0.000000] ACPI: RSDP 000f65b0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT b77f42f6 0005C (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP b77e4000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001) [ 0.000000] ACPI: DSDT b77e5000 0A894 (v02 Intel CALPELLA 06040000 INTL 20060912) [ 0.000000] ACPI: FACS b779bfc0 00040 [ 0.000000] ACPI: HPET b77fed86 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001) [ 0.000000] ACPI: MCFG b77fedbe 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001) [ 0.000000] ACPI: SLIC b77fedfa 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: APIC b77fef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT b77fefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT b77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2048MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e1ed8] TEXT DATA BSS ==> [0000100000 - 00008e1ed8] [ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] [ 0.000000] #5 [00008e2000 - 00008e51dc] BRK ==> [00008e2000 - 00008e51dc] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e6000 - 000107ea33] NEW RAMDISK ==> [00008e6000 - 000107ea33] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f6670] f6670 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000b7800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000b727c [ 0.000000] 0: 0x000b7282 -> 0x000b73ee [ 0.000000] 0: 0x000b740f -> 0x000b746f [ 0.000000] 0: 0x000b770f -> 0x000b7717 [ 0.000000] 0: 0x000b771f -> 0x000b7780 [ 0.000000] 0: 0x000b779f -> 0x000b77e2 [ 0.000000] 0: 0x000b77ff -> 0x000b7800 [ 0.000000] On node 0 totalpages: 750721 [ 0.000000] free_area_init_node: node 0, pgdat c079c940, node_mem_map c1080200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3948 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4097 pages used for memmap [ 0.000000] HighMem zone: 519414 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:3bfff000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 744848 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-31-generic root=UUID=b2eaf1c2-10d7-457e-8b00-235397dce05e ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15032000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000b7800) [ 0.000000] Memory: 2946900k/3006464k available (4689k kernel code, 55008k reserved, 2121k data, 664k init, 2094044k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084d000 ( 664 kB) [ 0.000000] .data : 0xc05947c7 - 0xc07a6f08 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc05947c7 (4689 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2128.278 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.55 BogoMIPS (lpj=8513112) [ 0.000018] Security Framework initialized [ 0.000033] AppArmor: AppArmor initialized [ 0.000038] Mount-cache hash table entries: 512 [ 0.000132] Initializing cgroup subsys ns [ 0.000135] Initializing cgroup subsys cpuacct [ 0.000138] Initializing cgroup subsys memory [ 0.000143] Initializing cgroup subsys devices [ 0.000145] Initializing cgroup subsys freezer [ 0.000147] Initializing cgroup subsys net_cls [ 0.000163] CPU: Physical Processor ID: 0 [ 0.000165] CPU: Processor Core ID: 0 [ 0.000169] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000170] CPU: L2 cache: 256K [ 0.000172] CPU: L3 cache: 3072K [ 0.000175] mce: CPU supports 9 MCE banks [ 0.000185] CPU0: Thermal monitoring handled by SMI [ 0.000189] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [ 0.000196] using mwait in idle threads. [ 0.000201] Performance Events: Westmere events, Intel PMU driver. [ 0.000208] ... version: 3 [ 0.000209] ... bit width: 48 [ 0.000210] ... generic registers: 4 [ 0.000212] ... value mask: 0000ffffffffffff [ 0.000213] ... max period: 000000007fffffff [ 0.000214] ... fixed-purpose events: 3 [ 0.000216] ... event mask: 000000070000000f [ 0.000219] Checking 'hlt' instruction... OK. [ 0.018240] ACPI: Core revision 20090903 [ 0.049533] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.049536] ftrace: allocating 21804 entries in 43 pages [ 0.056854] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.057258] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096931] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05 [ 0.203677] Booting processor 1 APIC 0x4 ip 0x6000 [ 0.213995] Initializing CPU#1 [ 0.291535] CPU: Physical Processor ID: 0 [ 0.291537] CPU: Processor Core ID: 2 [ 0.291540] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.291541] CPU: L2 cache: 256K [ 0.291542] CPU: L3 cache: 3072K [ 0.291553] CPU1: Thermal monitoring handled by SMI [ 0.291557] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [ 0.291595] CPU1: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05 [ 0.291603] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.311622] Brought up 2 CPUs [ 0.311624] Total of 2 processors activated (8512.45 BogoMIPS). [ 0.312118] CPU0 attaching sched-domain: [ 0.312122] domain 0: span 0-1 level MC [ 0.312124] groups: 0 1 [ 0.312131] CPU1 attaching sched-domain: [ 0.312132] domain 0: span 0-1 level MC [ 0.312134] groups: 1 0 [ 0.312337] devtmpfs: initialized [ 0.312675] regulator: core version 0.5 [ 0.312706] Time: 14:12:47 Date: 04/30/11 [ 0.312744] NET: Registered protocol family 16 [ 0.312819] Trying to unpack rootfs image as initramfs... [ 0.312850] EISA bus registered [ 0.312857] ACPI: bus type pci registered [ 0.312919] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 255 [ 0.312923] PCI: MCFG area at f8000000 reserved in E820 [ 0.312925] PCI: updated MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.312926] PCI: Using MMCONFIG for extended config space [ 0.312928] PCI: Using configuration type 1 for base access [ 0.315603] bio: create slab at 0 [ 0.316784] ACPI: EC: Look up EC in DSDT [ 0.324092] ACPI: BIOS _OSI(Linux) query ignored [ 0.328884] ACPI: Interpreter enabled [ 0.328890] ACPI: (supports S0 S3 S4 S5) [ 0.328913] ACPI: Using IOAPIC for interrupt routing [ 0.329327] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.329516] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.338986] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.339070] ACPI: Power Resource [FN00] (off) [ 0.339123] ACPI: Power Resource [FN01] (off) [ 0.339440] ACPI: No dock devices found. [ 0.340403] _OSC invalid UUID [ 0.340405] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.340486] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc3fffff] [ 0.340492] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.340497] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.340592] pci 0000:00:16.0: reg 10 64bit mmio: [0xfc805800-0xfc80580f] [ 0.340652] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.340658] pci 0000:00:16.0: PME# disabled [ 0.340731] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfc806000-0xfc8063ff] [ 0.340799] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.340804] pci 0000:00:1a.0: PME# disabled [ 0.340859] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc800000-0xfc803fff] [ 0.340919] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.340924] pci 0000:00:1b.0: PME# disabled [ 0.341015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.341020] pci 0000:00:1c.0: PME# disabled [ 0.341115] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.341120] pci 0000:00:1c.3: PME# disabled [ 0.341191] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfc806400-0xfc8067ff] [ 0.341257] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.341262] pci 0000:00:1d.0: PME# disabled [ 0.341488] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.341497] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.341504] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.341512] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.341520] pci 0000:00:1f.2: reg 20 io port: [0x1820-0x183f] [ 0.341528] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc805000-0xfc8057ff] [ 0.341574] pci 0000:00:1f.2: PME# supported from D3hot [ 0.341578] pci 0000:00:1f.2: PME# disabled [ 0.341618] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc806800-0xfc8068ff] [ 0.341638] pci 0000:00:1f.3: reg 20 io port: [0x1840-0x185f] [ 0.341710] pci 0000:00:1f.6: reg 10 64bit mmio: [0xfc804000-0xfc804fff] [ 0.341885] pci 0000:02:00.0: reg 10 64bit mmio: [0xfc500000-0xfc503fff] [ 0.341981] pci 0000:02:00.0: supports D1 D2 [ 0.341983] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.341990] pci 0000:02:00.0: PME# disabled [ 0.342073] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.342078] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc500000-0xfc5fffff] [ 0.342086] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfcc00000-0xfcdfffff] [ 0.342138] pci 0000:04:00.0: reg 10 io port: [0x3000-0x30ff] [ 0.342158] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xfc900000-0xfc900fff] [ 0.342173] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xfca04000-0xfca07fff] [ 0.342219] pci 0000:04:00.0: supports D1 D2 [ 0.342221] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342226] pci 0000:04:00.0: PME# disabled [ 0.342299] pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff] [ 0.342303] pci 0000:00:1c.3: bridge 32bit mmio: [0xfc400000-0xfc4fffff] [ 0.342311] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfc900000-0xfcbfffff] [ 0.342366] pci 0000:00:1e.0: transparent bridge [ 0.342398] pci_bus 0000:00: on NUMA node 0 [ 0.342404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.342750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.343023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.343190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.343495] _OSC invalid UUID [ 0.356637] ACPI: PCI Root Bridge [CPBG] (0000:3f) [ 0.356784] pci_bus 0000:3f: on NUMA node 0 [ 0.357055] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.357185] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.357313] ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *10 [ 0.357443] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.357571] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [ 0.357700] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [ 0.357831] ACPI: PCI Interrupt Link [LNKG] (IRQs 5) *7 [ 0.357960] ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *11 [ 0.358075] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.358084] vgaarb: loaded [ 0.358182] SCSI subsystem initialized [ 0.358261] libata version 3.00 loaded. [ 0.358318] usbcore: registered new interface driver usbfs [ 0.358327] usbcore: registered new interface driver hub [ 0.358346] usbcore: registered new device driver usb [ 0.358452] ACPI: WMI: Mapper loaded [ 0.358453] PCI: Using ACPI for IRQ routing [ 0.358636] NetLabel: Initializing [ 0.358638] NetLabel: domain hash size = 128 [ 0.358639] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.358651] NetLabel: unlabeled traffic allowed by default [ 0.358687] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.358694] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.360719] Switching to clocksource tsc [ 0.362505] AppArmor: AppArmor Filesystem Enabled [ 0.362516] pnp: PnP ACPI init [ 0.362528] ACPI: bus type pnp registered [ 0.365972] pnp: PnP ACPI: found 12 devices [ 0.365975] ACPI: ACPI bus type pnp unregistered [ 0.365978] PnPBIOS: Disabled by ACPI PNP [ 0.365989] system 00:05: ioport range 0x680-0x69f has been reserved [ 0.365991] system 00:05: ioport range 0x500-0x50f has been reserved [ 0.365994] system 00:05: ioport range 0x600-0x603 has been reserved [ 0.365996] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.365998] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.366001] system 00:05: ioport range 0x1180-0x11ff has been reserved [ 0.366003] system 00:05: ioport range 0x164e-0x164f has been reserved [ 0.366005] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 0.366010] system 00:06: ioport range 0x6a0-0x6af has been reserved [ 0.366012] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 0.366018] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.366020] system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.366023] system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.366027] system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.366030] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.366032] system 00:0a: iomem range 0xf7fff000-0xf7ffffff has been reserved [ 0.366034] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.366037] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.366039] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.366042] system 00:0a: iomem range 0xff000000-0xffffffff has been reserved [ 0.366044] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.400724] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.400729] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.400735] pci 0000:00:1c.0: MEM window: 0xfc500000-0xfc5fffff [ 0.400740] pci 0000:00:1c.0: PREFETCH window: 0x000000fcc00000-0x000000fcdfffff [ 0.400749] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 0.400752] pci 0000:00:1c.3: IO window: 0x3000-0x3fff [ 0.400758] pci 0000:00:1c.3: MEM window: 0xfc400000-0xfc4fffff [ 0.400763] pci 0000:00:1c.3: PREFETCH window: 0x000000fc900000-0x000000fcbfffff [ 0.400771] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.400773] pci 0000:00:1e.0: IO window: disabled [ 0.400779] pci 0000:00:1e.0: MEM window: disabled [ 0.400783] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.400806] alloc irq_desc for 16 on node -1 [ 0.400808] alloc kstat_irqs on node -1 [ 0.400814] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.400820] pci 0000:00:1c.0: setting latency timer to 64 [ 0.400831] alloc irq_desc for 19 on node -1 [ 0.400832] alloc kstat_irqs on node -1 [ 0.400835] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.400840] pci 0000:00:1c.3: setting latency timer to 64 [ 0.400849] pci 0000:00:1e.0: setting latency timer to 64 [ 0.400855] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.400857] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.400859] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.400861] pci_bus 0000:02: resource 1 mem: [0xfc500000-0xfc5fffff] [ 0.400863] pci_bus 0000:02: resource 2 pref mem [0xfcc00000-0xfcdfffff] [ 0.400866] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] [ 0.400868] pci_bus 0000:04: resource 1 mem: [0xfc400000-0xfc4fffff] [ 0.400870] pci_bus 0000:04: resource 2 pref mem [0xfc900000-0xfcbfffff] [ 0.400872] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.400874] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.400876] pci_bus 0000:3f: resource 0 io: [0x00-0xffff] [ 0.400878] pci_bus 0000:3f: resource 1 mem: [0x000000-0xffffffff] [ 0.400912] NET: Registered protocol family 2 [ 0.400993] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.401231] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.401503] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.401627] TCP: Hash tables configured (established 131072 bind 65536) [ 0.401629] TCP reno registered [ 0.401685] NET: Registered protocol family 1 [ 0.401698] pci 0000:00:02.0: Boot video device [ 0.401769] Simple Boot Flag at 0x37 set to 0x1 [ 0.401917] cpufreq-nforce2: No nForce2 chipset. [ 0.401939] Scanning for low memory corruption every 60 seconds [ 0.402025] audit: initializing netlink socket (disabled) [ 0.402033] type=2000 audit(1304172767.262:1): initialized [ 0.415783] highmem bounce pool size: 64 pages [ 0.415788] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.417024] VFS: Disk quotas dquot_6.5.2 [ 0.417069] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.417541] fuse init (API version 7.13) [ 0.417611] msgmni has been set to 1667 [ 0.417782] alg: No test for stdrng (krng) [ 0.417828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.417830] io scheduler noop registered [ 0.417832] io scheduler anticipatory registered [ 0.417833] io scheduler deadline registered [ 0.417866] io scheduler cfq registered (default) [ 0.418011] alloc irq_desc for 24 on node -1 [ 0.418013] alloc kstat_irqs on node -1 [ 0.418024] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.418036] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.418173] alloc irq_desc for 25 on node -1 [ 0.418175] alloc kstat_irqs on node -1 [ 0.418183] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X [ 0.418193] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.418278] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.418423] _OSC invalid UUID [ 0.418533] _OSC invalid UUID [ 0.418652] _OSC invalid UUID [ 0.418757] _OSC invalid UUID [ 0.418777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.419768] ACPI: AC Adapter [ADP1] (on-line) [ 0.419832] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.419885] ACPI: Lid Switch [LID0] [ 0.419919] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.419925] ACPI: Power Button [PWRB] [ 0.419962] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.419964] ACPI: Sleep Button [SLPB] [ 0.419995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.419997] ACPI: Power Button [PWRF] [ 0.420133] fan PNP0C0B:00: registered as cooling_device0 [ 0.420137] ACPI: Fan [FAN0] (off) [ 0.420241] fan PNP0C0B:01: registered as cooling_device1 [ 0.420245] ACPI: Fan [FAN1] (off) [ 0.421382] ACPI: SSDT b771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.421969] ACPI: SSDT b7718698 005D9 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.422564] Monitor-Mwait will be used to enter C-1 state [ 0.422586] Monitor-Mwait will be used to enter C-2 state [ 0.422613] processor LNXCPU:00: registered as cooling_device2 [ 0.423147] ACPI: SSDT b7719a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.423646] ACPI: SSDT b7717d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.427661] processor LNXCPU:01: registered as cooling_device3 [ 0.433222] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.433229] ACPI: Thermal Zone [TZ00] (58 C) [ 0.434480] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.434486] ACPI: Thermal Zone [TZ01] (58 C) [ 0.435771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.436848] brd: module loaded [ 0.437199] loop: module loaded [ 0.437271] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.437583] Fixed MDIO Bus: probed [ 0.437610] PPP generic driver version 2.4.2 [ 0.437639] tun: Universal TUN/TAP device driver, 1.6 [ 0.437641] tun: (C) 1999-2004 Max Krasnyansky [ 0.437706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.437728] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.437740] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.437744] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.437768] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.437801] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.441765] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 0.441782] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfc806000 [ 0.445804] isapnp: Scanning for PnP cards... [ 0.495019] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.495132] usb usb1: configuration #1 chosen from 1 choice [ 0.495197] hub 1-0:1.0: USB hub found [ 0.495205] hub 1-0:1.0: 3 ports detected [ 0.495266] alloc irq_desc for 23 on node -1 [ 0.495268] alloc kstat_irqs on node -1 [ 0.495275] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.495295] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.495299] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.495330] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.495362] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.499348] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 0.499379] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfc806400 [ 0.514618] Freeing initrd memory: 7778k freed [ 0.547071] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.547242] usb usb2: configuration #1 chosen from 1 choice [ 0.547269] hub 2-0:1.0: USB hub found [ 0.547277] hub 2-0:1.0: 3 ports detected [ 0.547375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.547388] uhci_hcd: USB Universal Host Controller Interface driver [ 0.547520] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12 [ 0.552085] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.552090] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.552195] mice: PS/2 mouse device common for all mice [ 0.552331] rtc_cmos 00:07: RTC can wake from S4 [ 0.552364] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.552395] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.552473] device-mapper: uevent: version 1.0.3 [ 0.552561] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.552608] device-mapper: multipath: version 1.1.0 loaded [ 0.552610] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.552694] EISA: Probing bus 0 at eisa.0 [ 0.552701] Cannot allocate resource for EISA slot 1 [ 0.552703] Cannot allocate resource for EISA slot 2 [ 0.552705] Cannot allocate resource for EISA slot 3 [ 0.552725] EISA: Detected 0 cards. [ 0.552818] cpuidle: using governor ladder [ 0.552882] cpuidle: using governor menu [ 0.553204] TCP cubic registered [ 0.553326] NET: Registered protocol family 10 [ 0.553678] lo: Disabled Privacy Extensions [ 0.553922] NET: Registered protocol family 17 [ 0.554684] Using IPI No-Shortcut mode [ 0.554745] PM: Resume from disk failed. [ 0.554756] registered taskstats version 1 [ 0.555176] Magic number: 7:893:233 [ 0.555228] acpi device:4d: hash matches [ 0.555274] rtc_cmos 00:07: setting system clock to 2011-04-30 14:12:47 UTC (1304172767) [ 0.555277] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.555278] EDD information not available. [ 0.558668] ACPI: Battery Slot [BAT1] (battery present) [ 0.585023] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.809107] isapnp: No Plug & Play device found [ 0.809119] Freeing unused kernel memory: 664k freed [ 0.809359] Write protecting the kernel text: 4692k [ 0.809386] Write protecting the kernel read-only data: 1844k [ 0.821926] udev: starting version 151 [ 0.843328] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.879316] ahci 0000:00:1f.2: version 3.0 [ 0.879338] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.882666] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.882689] r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.882728] r8169 0000:04:00.0: setting latency timer to 64 [ 0.882734] r8169 0000:04:00.0: unknown MAC, using family default [ 0.882777] alloc irq_desc for 26 on node -1 [ 0.882779] alloc kstat_irqs on node -1 [ 0.882792] r8169 0000:04:00.0: irq 26 for MSI/MSI-X [ 0.883279] eth0: RTL8168b/8111b at 0xf8030000, e8:11:32:0f:e8:6c, XID 0c200000 IRQ 26 [ 0.884349] alloc irq_desc for 27 on node -1 [ 0.884350] alloc kstat_irqs on node -1 [ 0.884359] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 0.884400] ahci: SSS flag set, parallel bus scan disabled [ 0.884438] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 0.884441] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 0.884447] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.916063] scsi0 : ahci [ 0.931079] scsi1 : ahci [ 0.940313] scsi2 : ahci [ 0.949176] scsi3 : ahci [ 0.949238] ata1: SATA max UDMA/133 abar m2048@0xfc805000 port 0xfc805100 irq 27 [ 0.949242] ata2: SATA max UDMA/133 abar m2048@0xfc805000 port 0xfc805180 irq 27 [ 0.949244] ata3: DUMMY [ 0.949245] ata4: DUMMY [ 0.975729] usb 1-1: configuration #1 chosen from 1 choice [ 0.975823] hub 1-1:1.0: USB hub found [ 0.975912] hub 1-1:1.0: 6 ports detected [ 1.087272] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.221084] usb 2-1: configuration #1 chosen from 1 choice [ 1.221316] hub 2-1:1.0: USB hub found [ 1.221434] hub 2-1:1.0: 8 ports detected [ 1.269567] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.270718] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC66G, max UDMA/133 [ 1.270725] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.272204] ata1.00: configured for UDMA/133 [ 1.284870] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 [ 1.285072] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.285157] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.285226] sd 0:0:0:0: [sda] Write Protect is off [ 1.285229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.285262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.285448] sda: [ 1.296719] usb 1-1.4: new high speed USB device using ehci_hcd and address 3 [ 1.308305] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 [ 1.365465] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.390015] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.492643] usb 2-1.3: new full speed USB device using ehci_hcd and address 3 [ 1.589471] usb 2-1.3: configuration #1 chosen from 1 choice [ 1.661555] usb 2-1.5: new high speed USB device using ehci_hcd and address 4 [ 1.754135] usb 2-1.5: configuration #1 chosen from 1 choice [ 1.761207] Initializing USB Mass Storage driver... [ 1.761300] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.761361] usbcore: registered new interface driver usb-storage [ 1.761364] USB Mass Storage support registered. [ 1.761368] usb-storage: device found at 4 [ 1.761369] usb-storage: waiting for device to settle before scanning [ 2.008354] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.010223] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100 [ 2.013317] ata2.00: configured for UDMA/100 [ 2.030874] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633J SC01 PQ: 0 ANSI: 5 [ 2.041766] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.041773] Uniform CD-ROM driver Revision: 3.20 [ 2.041906] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.041948] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.731910] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 6.759416] usb-storage: device scan complete [ 6.759904] scsi 4:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4 [ 6.760459] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.761000] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.761616] sd 4:0:0:0: [sdb] Write Protect is off [ 6.761621] sd 4:0:0:0: [sdb] Mode Sense: 2f 08 00 00 [ 6.761626] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.762989] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.762995] sdb: sdb1 [ 6.833335] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.833342] sd 4:0:0:0: [sdb] Attached SCSI disk [ 11.539408] udev: starting version 151 [ 11.603247] Adding 2610168k swap on /dev/sda8. Priority:-1 extents:1 across:2610168k [ 11.633417] lp: driver loaded but no devices found [ 11.676453] Linux agpgart interface v0.103 [ 11.727452] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset [ 11.727911] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 11.867301] [drm] Initialized drm 1.1.0 20060810 [ 11.871557] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 11.875104] Linux video capture interface: v2.00 [ 11.875991] type=1505 audit(1304152978.822:2): operation="profile_load" pid=803 name="/sbin/dhclient3" [ 11.876517] type=1505 audit(1304152978.822:3): operation="profile_load" pid=803 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.876811] type=1505 audit(1304152978.822:4): operation="profile_load" pid=803 name="/usr/lib/connman/scripts/dhclient-script" [ 11.878759] type=1505 audit(1304152978.826:5): operation="profile_replace" pid=797 name="/sbin/dhclient3" [ 11.879286] type=1505 audit(1304152978.826:6): operation="profile_replace" pid=797 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.879581] type=1505 audit(1304152978.826:7): operation="profile_replace" pid=797 name="/usr/lib/connman/scripts/dhclient-script" [ 11.882888] Bluetooth: Core ver 2.15 [ 11.886248] NET: Registered protocol family 31 [ 11.886250] Bluetooth: HCI device and connection manager initialized [ 11.886253] Bluetooth: HCI socket layer initialized [ 11.887840] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 11.887935] usbcore: registered new interface driver btusb [ 11.899653] uvcvideo: Found UVC 1.00 device WebCam SCB-0385N (2232:1005) [ 11.900769] input: WebCam SCB-0385N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 11.900815] usbcore: registered new interface driver uvcvideo [ 11.900818] USB Video Class driver (v0.1.0) [ 11.921343] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.921349] i915 0000:00:02.0: setting latency timer to 64 [ 11.927871] alloc irq_desc for 28 on node -1 [ 11.927874] alloc kstat_irqs on node -1 [ 11.927883] i915 0000:00:02.0: irq 28 for MSI/MSI-X [ 11.927889] [drm] set up 31M of stolen space [ 12.107055] psmouse serio1: ID: 10 00 64 [ 12.471358] fb0: inteldrmfb frame buffer device [ 12.471361] registered panic notifier [ 12.472610] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 12.477173] acpi device:0b: registered as cooling_device4 [ 12.478549] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input7 [ 12.478704] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 12.478831] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 12.478874] alloc irq_desc for 22 on node -1 [ 12.478876] alloc kstat_irqs on node -1 [ 12.478882] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.478922] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.482647] vga16fb: initializing [ 12.482650] vga16fb: mapped to 0xc00a0000 [ 12.482654] vga16fb: not registering due to another framebuffer present [ 12.511003] r8169: eth0: link up [ 12.511010] r8169: eth0: link up [ 12.549398] type=1505 audit(1304152979.494:8): operation="profile_replace" pid=985 name="/sbin/dhclient3" [ 12.549923] type=1505 audit(1304152979.494:9): operation="profile_replace" pid=985 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.550218] type=1505 audit(1304152979.494:10): operation="profile_replace" pid=985 name="/usr/lib/connman/scripts/dhclient-script" [ 12.551155] type=1505 audit(1304152979.498:11): operation="profile_load" pid=984 name="/usr/share/gdm/guest-session/Xsession" [ 12.606027] hda_codec: ALC269: BIOS auto-probing. [ 12.606509] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 12.771646] Console: switching to colour frame buffer device 170x48 [ 12.922962] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input9 [ 13.015091] Bluetooth: L2CAP ver 2.14 [ 13.015094] Bluetooth: L2CAP socket layer initialized [ 13.019793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.019796] Bluetooth: BNEP filters: protocol multicast [ 13.026123] Bridge firewalling registered [ 13.030658] Bluetooth: SCO (Voice Link) ver 0.6 [ 13.030661] Bluetooth: SCO socket layer initialized [ 13.101634] Bluetooth: RFCOMM TTY layer initialized [ 13.101638] Bluetooth: RFCOMM socket layer initialized [ 13.101639] Bluetooth: RFCOMM ver 1.11 [ 13.162653] ppdev: user-space parallel port driver [ 23.382086] eth0: no IPv6 routers present [ 27.573034] usb 2-1.1: new high speed USB device using ehci_hcd and address 5 [ 27.671092] usb 2-1.1: configuration #1 chosen from 1 choice [ 27.671281] scsi5 : SCSI emulation for USB Mass Storage devices [ 27.671393] usb-storage: device found at 5 [ 27.671395] usb-storage: waiting for device to settle before scanning [ 32.668191] usb-storage: device scan complete [ 32.693913] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [ 32.694889] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 33.594385] sd 5:0:0:0: [sdc] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 33.596192] sd 5:0:0:0: [sdc] Write Protect is off [ 33.596198] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 33.596202] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 33.600579] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 33.600586] sdc: sdc1 [ 33.619019] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 33.619024] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 5312.248766] r8169: eth0: link down [13187.644118] usb 2-1.1: USB disconnect, address 5 [17051.045347] usb 2-1.1: new high speed USB device using ehci_hcd and address 6 [17051.141397] usb 2-1.1: configuration #1 chosen from 1 choice [17051.141818] scsi6 : SCSI emulation for USB Mass Storage devices [17051.142089] usb-storage: device found at 6 [17051.142092] usb-storage: waiting for device to settle before scanning [17056.141927] usb-storage: device scan complete [17056.142471] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 120 1.00 PQ: 0 ANSI: 2 [17056.143321] sd 6:0:0:0: Attached scsi generic sg3 type 0 [17056.147302] sd 6:0:0:0: [sdc] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB) [17056.148709] sd 6:0:0:0: [sdc] Write Protect is off [17056.148716] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00 [17056.148720] sd 6:0:0:0: [sdc] Assuming drive cache: write through [17056.151492] sd 6:0:0:0: [sdc] Assuming drive cache: write through [17056.151500] sdc: sdc1 [17056.154247] sd 6:0:0:0: [sdc] Assuming drive cache: write through [17056.154254] sd 6:0:0:0: [sdc] Attached SCSI removable disk [17057.436688] lo: Disabled Privacy Extensions [17086.896007] r8169: eth0: link up [18486.536722] r8169: eth0: link down [18920.198612] r8169: eth0: link up [19264.311442] usb 2-1.5: USB disconnect, address 4 [19267.582361] usb 2-1.5: new high speed USB device using ehci_hcd and address 7 [19267.680177] usb 2-1.5: configuration #1 chosen from 1 choice [19267.680404] scsi7 : SCSI emulation for USB Mass Storage devices [19267.680595] usb-storage: device found at 7 [19267.680598] usb-storage: waiting for device to settle before scanning [19272.677112] usb-storage: device scan complete [19272.700471] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 120 PMAP PQ: 0 ANSI: 0 CCS [19272.701360] sd 7:0:0:0: Attached scsi generic sg2 type 0 [19273.201002] sd 7:0:0:0: [sdb] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) [19273.202706] sd 7:0:0:0: [sdb] Write Protect is off [19273.202712] sd 7:0:0:0: [sdb] Mode Sense: 03 41 00 00 [19273.202716] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19273.207031] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19273.207039] sdb: sdb1 [19273.226676] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19273.226685] sd 7:0:0:0: [sdb] Attached SCSI removable disk [19465.888946] lo: Disabled Privacy Extensions [19481.909599] lo: Disabled Privacy Extensions [19849.536693] usb 2-1.1: USB disconnect, address 6 [19859.772371] usb 2-1.5: USB disconnect, address 7 [20485.964216] lo: Disabled Privacy Extensions [20970.542243] usb 2-1.5: new high speed USB device using ehci_hcd and address 8 [20970.639928] usb 2-1.5: configuration #1 chosen from 1 choice [20970.640128] scsi8 : SCSI emulation for USB Mass Storage devices [20970.640333] usb-storage: device found at 8 [20970.640337] usb-storage: waiting for device to settle before scanning [20975.637704] usb-storage: device scan complete [20975.660951] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 120 PMAP PQ: 0 ANSI: 0 CCS [20975.662215] sd 8:0:0:0: Attached scsi generic sg2 type 0 [20976.104112] sd 8:0:0:0: [sdb] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) [20976.105863] sd 8:0:0:0: [sdb] Write Protect is off [20976.105869] sd 8:0:0:0: [sdb] Mode Sense: 03 41 00 00 [20976.105874] sd 8:0:0:0: [sdb] Assuming drive cache: write through [20976.110732] sd 8:0:0:0: [sdb] Assuming drive cache: write through [20976.110740] sdb: sdb1 [20976.129811] sd 8:0:0:0: [sdb] Assuming drive cache: write through [20976.129819] sd 8:0:0:0: [sdb] Attached SCSI removable disk [21099.768603] usb 2-1.1: new high speed USB device using ehci_hcd and address 9 [21099.956377] usb 2-1.1: configuration #1 chosen from 1 choice [21099.956890] scsi9 : SCSI emulation for USB Mass Storage devices [21099.957158] usb-storage: device found at 9 [21099.957162] usb-storage: waiting for device to settle before scanning [21104.957074] usb-storage: device scan complete [21104.958037] scsi 9:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2 [21104.958864] sd 9:0:0:0: Attached scsi generic sg3 type 0 [21104.962505] sd 9:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB) [21104.963400] sd 9:0:0:0: [sdc] Write Protect is off [21104.963406] sd 9:0:0:0: [sdc] Mode Sense: 03 00 00 00 [21104.963411] sd 9:0:0:0: [sdc] Assuming drive cache: write through [21104.967178] sd 9:0:0:0: [sdc] Assuming drive cache: write through [21104.967185] sdc: sdc1 [21104.970303] sd 9:0:0:0: [sdc] Assuming drive cache: write through [21104.970311] sd 9:0:0:0: [sdc] Attached SCSI removable disk [21113.305535] lo: Disabled Privacy Extensions [21265.483074] lo: Disabled Privacy Extensions [21424.807723] usb 2-1.5: USB disconnect, address 8 [21427.309086] usb 2-1.5: new high speed USB device using ehci_hcd and address 10 [21427.406912] usb 2-1.5: configuration #1 chosen from 1 choice [21427.407722] scsi10 : SCSI emulation for USB Mass Storage devices [21427.407906] usb-storage: device found at 10 [21427.407910] usb-storage: waiting for device to settle before scanning [21427.878179] usb 2-1.1: USB disconnect, address 9 [21432.404047] usb-storage: device scan complete [21432.427450] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 120 PMAP PQ: 0 ANSI: 0 CCS [21432.428976] sd 10:0:0:0: Attached scsi generic sg2 type 0 [21432.875596] sd 10:0:0:0: [sdb] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) [21432.877208] sd 10:0:0:0: [sdb] Write Protect is off [21432.877215] sd 10:0:0:0: [sdb] Mode Sense: 03 41 00 00 [21432.877219] sd 10:0:0:0: [sdb] Assuming drive cache: write through [21432.881408] sd 10:0:0:0: [sdb] Assuming drive cache: write through [21432.881415] sdb: sdb1 [21432.900287] sd 10:0:0:0: [sdb] Assuming drive cache: write through [21432.900297] sd 10:0:0:0: [sdb] Attached SCSI removable disk [21484.584074] lo: Disabled Privacy Extensions [21879.603770] lo: Disabled Privacy Extensions [25193.272874] usb 2-1.2: new high speed USB device using ehci_hcd and address 11 [25193.471179] usb 2-1.2: configuration #1 chosen from 1 choice [25193.471740] scsi11 : SCSI emulation for USB Mass Storage devices [25193.472006] usb-storage: device found at 11 [25193.472010] usb-storage: waiting for device to settle before scanning [25198.471180] usb-storage: device scan complete [25199.111128] scsi 11:0:0:0: Direct-Access HP v165w 3000 PQ: 0 ANSI: 0 CCS [25199.112464] sd 11:0:0:0: Attached scsi generic sg3 type 0 [25199.113743] sd 11:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB) [25199.115023] sd 11:0:0:0: [sdc] Write Protect is off [25199.115030] sd 11:0:0:0: [sdc] Mode Sense: 43 00 00 00 [25199.115035] sd 11:0:0:0: [sdc] Assuming drive cache: write through [25199.118784] sd 11:0:0:0: [sdc] Assuming drive cache: write through [25199.118794] sdc: sdc1 [25199.122321] sd 11:0:0:0: [sdc] Assuming drive cache: write through [25199.122329] sd 11:0:0:0: [sdc] Attached SCSI removable disk [25232.480432] usb 2-1.5: USB disconnect, address 10 [25243.938148] usb 2-1.5: new high speed USB device using ehci_hcd and address 12 [25244.031095] usb 2-1.5: configuration #1 chosen from 1 choice [25244.033460] scsi12 : SCSI emulation for USB Mass Storage devices [25244.033757] usb-storage: device found at 12 [25244.033761] usb-storage: waiting for device to settle before scanning [25249.032943] usb-storage: device scan complete [25249.033522] scsi 12:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4 [25249.034549] sd 12:0:0:0: Attached scsi generic sg2 type 0 [25249.038087] sd 12:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [25249.039668] sd 12:0:0:0: [sdb] Write Protect is off [25249.039675] sd 12:0:0:0: [sdb] Mode Sense: 2f 08 00 00 [25249.039679] sd 12:0:0:0: [sdb] Assuming drive cache: write through [25249.041042] sd 12:0:0:0: [sdb] Assuming drive cache: write through [25249.041049] sdb: sdb1 [25249.108392] sd 12:0:0:0: [sdb] Assuming drive cache: write through [25249.108400] sd 12:0:0:0: [sdb] Attached SCSI disk [25477.566079] usb 2-1.1: new high speed USB device using ehci_hcd and address 13 [25477.760907] usb 2-1.1: configuration #1 chosen from 1 choice [25477.761648] scsi13 : SCSI emulation for USB Mass Storage devices [25477.761808] usb-storage: device found at 13 [25477.761813] usb-storage: waiting for device to settle before scanning [25482.756710] usb-storage: device scan complete [25483.265969] scsi 13:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS [25483.266742] sd 13:0:0:0: Attached scsi generic sg4 type 0 [25483.275566] sd 13:0:0:0: [sdd] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB) [25483.276464] sd 13:0:0:0: [sdd] Write Protect is off [25483.276467] sd 13:0:0:0: [sdd] Mode Sense: 43 00 00 00 [25483.276469] sd 13:0:0:0: [sdd] Assuming drive cache: write through [25483.278929] sd 13:0:0:0: [sdd] Assuming drive cache: write through [25483.278937] sdd: sdd1 [25483.282412] sd 13:0:0:0: [sdd] Assuming drive cache: write through [25483.282415] sd 13:0:0:0: [sdd] Attached SCSI removable disk [25644.210535] usb 2-1.1: USB disconnect, address 13 [25667.497078] usb 2-1.2: USB disconnect, address 11 [26435.277929] lo: Disabled Privacy Extensions [27037.743559] usb 2-1.1: new high speed USB device using ehci_hcd and address 14 [27037.840255] usb 2-1.1: configuration #1 chosen from 1 choice [27037.840621] scsi14 : SCSI emulation for USB Mass Storage devices [27037.840886] usb-storage: device found at 14 [27037.840890] usb-storage: waiting for device to settle before scanning [27042.838101] usb-storage: device scan complete [27042.861429] scsi 14:0:0:0: Direct-Access Kingston DataTraveler 120 PMAP PQ: 0 ANSI: 0 CCS [27042.862354] sd 14:0:0:0: Attached scsi generic sg3 type 0 [27043.310023] sd 14:0:0:0: [sdc] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) [27043.311670] sd 14:0:0:0: [sdc] Write Protect is off [27043.311676] sd 14:0:0:0: [sdc] Mode Sense: 03 41 00 00 [27043.311680] sd 14:0:0:0: [sdc] Assuming drive cache: write through [27043.316378] sd 14:0:0:0: [sdc] Assuming drive cache: write through [27043.316386] sdc: sdc1 [27043.336257] sd 14:0:0:0: [sdc] Assuming drive cache: write through [27043.336266] sd 14:0:0:0: [sdc] Attached SCSI removable disk [27134.013997] usb 2-1.1: USB disconnect, address 14 [27140.864539] usb 2-1.1: new high speed USB device using ehci_hcd and address 15 [27140.962357] usb 2-1.1: configuration #1 chosen from 1 choice [27140.962553] scsi15 : SCSI emulation for USB Mass Storage devices [27140.962741] usb-storage: device found at 15 [27140.962745] usb-storage: waiting for device to settle before scanning [27145.960070] usb-storage: device scan complete [27145.985718] scsi 15:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [27145.988426] sd 15:0:0:0: Attached scsi generic sg3 type 0 [27146.768194] sd 15:0:0:0: [sdc] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB) [27146.770013] sd 15:0:0:0: [sdc] Write Protect is off [27146.770019] sd 15:0:0:0: [sdc] Mode Sense: 03 41 00 00 [27146.770024] sd 15:0:0:0: [sdc] Assuming drive cache: write through [27146.774599] sd 15:0:0:0: [sdc] Assuming drive cache: write through [27146.774606] sdc: sdc1 [27146.796841] sd 15:0:0:0: [sdc] Assuming drive cache: write through [27146.796849] sd 15:0:0:0: [sdc] Attached SCSI removable disk [28351.747749] usb 2-1.2: new high speed USB device using ehci_hcd and address 16 [28351.846225] usb 2-1.2: configuration #1 chosen from 1 choice [28351.846715] scsi16 : SCSI emulation for USB Mass Storage devices [28351.846845] usb-storage: device found at 16 [28351.846847] usb-storage: waiting for device to settle before scanning [28356.843218] usb-storage: device scan complete [28356.866474] scsi 16:0:0:0: Direct-Access Kingston DataTraveler 120 PMAP PQ: 0 ANSI: 0 CCS [28356.867382] sd 16:0:0:0: Attached scsi generic sg4 type 0 [28357.304864] sd 16:0:0:0: [sdd] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) [28357.306518] sd 16:0:0:0: [sdd] Write Protect is off [28357.306524] sd 16:0:0:0: [sdd] Mode Sense: 03 41 00 00 [28357.306529] sd 16:0:0:0: [sdd] Assuming drive cache: write through [28357.311188] sd 16:0:0:0: [sdd] Assuming drive cache: write through [28357.311195] sdd: sdd1 [28357.330100] sd 16:0:0:0: [sdd] Assuming drive cache: write through [28357.330107] sd 16:0:0:0: [sdd] Attached SCSI removable disk [28450.578349] usb 2-1.2: USB disconnect, address 16 [28707.577513] r8169: eth0: link down [29755.571744] usb 2-1.2: new high speed USB device using ehci_hcd and address 17 [29755.668438] usb 2-1.2: configuration #1 chosen from 1 choice [29755.668648] scsi17 : SCSI emulation for USB Mass Storage devices [29755.668784] usb-storage: device found at 17 [29755.668786] usb-storage: waiting for device to settle before scanning [29760.666461] usb-storage: device scan complete [29760.689737] scsi 17:0:0:0: Direct-Access Kingston DataTraveler 120 PMAP PQ: 0 ANSI: 0 CCS [29760.690856] sd 17:0:0:0: Attached scsi generic sg4 type 0 [29761.137871] sd 17:0:0:0: [sdd] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) [29761.139452] sd 17:0:0:0: [sdd] Write Protect is off [29761.139458] sd 17:0:0:0: [sdd] Mode Sense: 03 41 00 00 [29761.139463] sd 17:0:0:0: [sdd] Assuming drive cache: write through [29761.143936] sd 17:0:0:0: [sdd] Assuming drive cache: write through [29761.143943] sdd: sdd1 [29761.162871] sd 17:0:0:0: [sdd] Assuming drive cache: write through [29761.162879] sd 17:0:0:0: [sdd] Attached SCSI removable disk [29800.408779] usb 2-1.2: USB disconnect, address 17 [34067.519980] r8169: eth0: link up [34536.909766] usb 2-1.2: new high speed USB device using ehci_hcd and address 18 [34537.086551] usb 2-1.2: configuration #1 chosen from 1 choice [34537.087523] scsi18 : SCSI emulation for USB Mass Storage devices [34537.087791] usb-storage: device found at 18 [34537.087795] usb-storage: waiting for device to settle before scanning [34542.084301] usb-storage: device scan complete [34542.084886] scsi 18:0:0:0: Direct-Access Kingston DataTraveler 130 1.00 PQ: 0 ANSI: 2 [34542.085650] sd 18:0:0:0: Attached scsi generic sg4 type 0 [34542.086928] sd 18:0:0:0: [sdd] 7818184 512-byte logical blocks: (4.00 GB/3.72 GiB) [34542.088237] sd 18:0:0:0: [sdd] Write Protect is off [34542.088240] sd 18:0:0:0: [sdd] Mode Sense: 03 00 00 00 [34542.088243] sd 18:0:0:0: [sdd] Assuming drive cache: write through [34542.090985] sd 18:0:0:0: [sdd] Assuming drive cache: write through [34542.090990] sdd: sdd1 [34542.094359] sd 18:0:0:0: [sdd] Assuming drive cache: write through [34542.094363] sd 18:0:0:0: [sdd] Attached SCSI removable disk [34872.699497] usb 2-1.2: USB disconnect, address 18 [35367.850757] usb 2-1.1: USB disconnect, address 15 [35372.747969] r8169: eth0: link down [35977.482910] lo: Disabled Privacy Extensions [36283.601860] r8169: eth0: link up [36685.125903] usb 2-1.1: new high speed USB device using ehci_hcd and address 19 [36685.224024] usb 2-1.1: configuration #1 chosen from 1 choice [36685.224367] scsi19 : SCSI emulation for USB Mass Storage devices [36685.224647] usb-storage: device found at 19 [36685.224651] usb-storage: waiting for device to settle before scanning [36690.219599] usb-storage: device scan complete [36690.245268] scsi 19:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [36690.245765] sd 19:0:0:0: Attached scsi generic sg3 type 0 [36691.019261] sd 19:0:0:0: [sdc] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB) [36691.021366] sd 19:0:0:0: [sdc] Write Protect is off [36691.021372] sd 19:0:0:0: [sdc] Mode Sense: 03 41 00 00 [36691.021377] sd 19:0:0:0: [sdc] Assuming drive cache: write through [36691.026035] sd 19:0:0:0: [sdc] Assuming drive cache: write through [36691.026043] sdc: sdc1 [36691.044902] sd 19:0:0:0: [sdc] Assuming drive cache: write through [36691.044910] sd 19:0:0:0: [sdc] Attached SCSI removable disk [36725.869238] usb 2-1.1: USB disconnect, address 19 [37236.857524] __ratelimit: 18 callbacks suppressed [37236.857527] type=1505 audit(1304190219.501:18): operation="profile_load" pid=8668 name="/usr/bin/freshclam"