[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-41-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #90-Ubuntu SMP Tue May 22 11:31:25 UTC 2012 (Ubuntu 2.6.32-41.90-generic 2.6.32.59+drm33.24) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb8000 (usable) [ 0.000000] BIOS-e820: 00000000bffb8000 - 00000000bffc0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000c0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffb8 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffb8000 (usable) [ 0.000000] modified: 00000000bffb8000 - 00000000bffc0000 (ACPI NVS) [ 0.000000] modified: 00000000bffc0000 - 00000000bffce000 (ACPI data) [ 0.000000] modified: 00000000bffce000 - 00000000c0000000 (ACPI NVS) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3784e000 - 37fefee6 [ 0.000000] Allocated new RAMDISK: 008ea000 - 0108bee6 [ 0.000000] Move RAMDISK from 000000003784e000 - 0000000037fefee5 to 008ea000 - 0108bee5 [ 0.000000] ACPI: RSDP 000f98b0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT bffc0000 0004C (v01 _ASUS_ Notebook 20081105 MSFT 00000097) [ 0.000000] ACPI: FACP bffc0200 00084 (v01 110508 FACP1304 20081105 MSFT 00000097) [ 0.000000] ACPI: DSDT bffc0680 094F1 (v01 X71SL X71SL001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS bffce000 00040 [ 0.000000] ACPI: APIC bffc0390 0005C (v01 110508 APIC1304 20081105 MSFT 00000097) [ 0.000000] ACPI: MCFG bffc0430 0003C (v01 110508 OEMMCFG 20081105 MSFT 00000097) [ 0.000000] ACPI: SLIC bffc0470 00176 (v01 _ASUS_ Notebook 20081105 MSFT 00000097) [ 0.000000] ACPI: ECDT bffc0620 00055 (v01 110508 OEMECDT 20081105 MSFT 00000097) [ 0.000000] ACPI: DBGP bffc03f0 00034 (v01 110508 DBGP1304 20081105 MSFT 00000097) [ 0.000000] ACPI: BOOT bffc05f0 00028 (v01 110508 BOOT1304 20081105 MSFT 00000097) [ 0.000000] ACPI: OEMB bffce040 00071 (v01 110508 OEMB1304 20081105 MSFT 00000097) [ 0.000000] ACPI: HPET bffc9b80 00038 (v01 110508 OEMHPET 20081105 MSFT 00000097) [ 0.000000] ACPI: SSDT bffced10 004E6 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e5f18] TEXT DATA BSS ==> [0000100000 - 00008e5f18] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008e6000 - 00008e915d] BRK ==> [00008e6000 - 00008e915d] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008ea000 - 000108bee6] NEW RAMDISK ==> [00008ea000 - 000108bee6] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bffb8 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb8 [ 0.000000] On node 0 totalpages: 786247 [ 0.000000] free_area_init_node: node 0, pgdat c07a0a20, node_mem_map c108d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554666 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780103 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=403b9a24-f8bf-4ff1-b505-c63bc1e35079 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15726880 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bffb8) [ 0.000000] Memory: 3087096k/3145440k available (4699k kernel code, 56852k reserved, 2128k data, 664k init, 2236136k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07ab000 - 0xc0851000 ( 664 kB) [ 0.000000] .data : 0xc0596c47 - 0xc07aafc8 (2128 kB) [ 0.000000] .text : 0xc0100000 - 0xc0596c47 (4699 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2265.958 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4531.91 BogoMIPS (lpj=9063832) [ 0.004031] Security Framework initialized [ 0.004070] AppArmor: AppArmor initialized [ 0.004079] Mount-cache hash table entries: 512 [ 0.004287] Initializing cgroup subsys ns [ 0.004294] Initializing cgroup subsys cpuacct [ 0.004298] Initializing cgroup subsys memory [ 0.004308] Initializing cgroup subsys devices [ 0.004311] Initializing cgroup subsys freezer [ 0.004314] Initializing cgroup subsys net_cls [ 0.004348] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004350] CPU: L2 cache: 3072K [ 0.004354] CPU: Physical Processor ID: 0 [ 0.004356] CPU: Processor Core ID: 0 [ 0.004362] mce: CPU supports 6 MCE banks [ 0.004375] CPU0: Thermal monitoring handled by SMI [ 0.004380] using mwait in idle threads. [ 0.004393] Performance Events: Core2 events, Intel PMU driver. [ 0.004403] ... version: 2 [ 0.004404] ... bit width: 40 [ 0.004406] ... generic registers: 2 [ 0.004408] ... value mask: 000000ffffffffff [ 0.004410] ... max period: 000000007fffffff [ 0.004412] ... fixed-purpose events: 3 [ 0.004413] ... event mask: 0000000700000003 [ 0.004420] Checking 'hlt' instruction... OK. [ 0.023150] ACPI: Core revision 20090903 [ 0.040008] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040014] ftrace: allocating 21840 entries in 43 pages [ 0.044076] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044322] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086092] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.172045] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 [ 0.172052] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176028] Brought up 2 CPUs [ 0.176030] Total of 2 processors activated (9063.87 BogoMIPS). [ 0.177359] CPU0 attaching sched-domain: [ 0.177364] domain 0: span 0-1 level MC [ 0.177366] groups: 0 1 [ 0.177372] CPU1 attaching sched-domain: [ 0.177374] domain 0: span 0-1 level MC [ 0.177376] groups: 1 0 [ 0.177442] devtmpfs: initialized [ 0.177442] regulator: core version 0.5 [ 0.177442] Time: 15:11:05 Date: 06/03/12 [ 0.177442] NET: Registered protocol family 16 [ 0.177442] Trying to unpack rootfs image as initramfs... [ 0.177442] EISA bus registered [ 0.177442] ACPI: bus type pci registered [ 0.177442] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.177442] PCI: Not using MMCONFIG. [ 0.177442] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 [ 0.177442] PCI: Using configuration type 1 for base access [ 0.184088] bio: create slab at 0 [ 0.185176] ACPI: EC: EC description table is found, configuring boot EC [ 0.186382] ACPI: Executed 1 blocks of module-level executable AML code [ 0.194794] ACPI: Interpreter enabled [ 0.194801] ACPI: (supports S0 S3 S4 S5) [ 0.194826] ACPI: Using IOAPIC for interrupt routing [ 0.194907] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.198209] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.198212] PCI: Using MMCONFIG for extended config space [ 0.203819] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.204141] ACPI: No dock devices found. [ 0.204485] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.204645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.204650] pci 0000:00:01.0: PME# disabled [ 0.204761] pci 0000:00:02.5: reg 20 io port: [0xffe0-0xffef] [ 0.204799] pci 0000:00:02.5: PME# supported from D3cold [ 0.204803] pci 0000:00:02.5: PME# disabled [ 0.204828] pci 0000:00:03.0: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff] [ 0.204880] pci 0000:00:03.1: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff] [ 0.204942] pci 0000:00:03.3: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff] [ 0.205002] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.205006] pci 0000:00:03.3: PME# disabled [ 0.205042] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9ffcc00-0xf9ffcc7f] [ 0.205049] pci 0000:00:04.0: reg 14 io port: [0xcc00-0xcc7f] [ 0.205096] pci 0000:00:04.0: supports D1 D2 [ 0.205098] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205102] pci 0000:00:04.0: PME# disabled [ 0.205134] pci 0000:00:05.0: reg 10 io port: [0xc800-0xc807] [ 0.205140] pci 0000:00:05.0: reg 14 io port: [0xc400-0xc403] [ 0.205147] pci 0000:00:05.0: reg 18 io port: [0xc000-0xc007] [ 0.205154] pci 0000:00:05.0: reg 1c io port: [0xbc00-0xbc03] [ 0.205160] pci 0000:00:05.0: reg 20 io port: [0xb800-0xb80f] [ 0.205167] pci 0000:00:05.0: reg 24 io port: [0xb400-0xb47f] [ 0.205199] pci 0000:00:05.0: PME# supported from D3cold [ 0.205203] pci 0000:00:05.0: PME# disabled [ 0.205308] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.205312] pci 0000:00:06.0: PME# disabled [ 0.205430] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.205434] pci 0000:00:07.0: PME# disabled [ 0.205480] pci 0000:00:0d.0: reg 10 32bit mmio: [0xf9ffc000-0xf9ffc7ff] [ 0.205532] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 0.205536] pci 0000:00:0d.0: PME# disabled [ 0.205569] pci 0000:00:0d.1: reg 10 32bit mmio: [0xf9ffc800-0xf9ffc8ff] [ 0.205621] pci 0000:00:0d.1: supports D1 D2 [ 0.205623] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205627] pci 0000:00:0d.1: PME# disabled [ 0.205662] pci 0000:00:0d.2: reg 10 32bit mmio: [0xf9ff7c00-0xf9ff7cff] [ 0.205724] pci 0000:00:0d.2: supports D1 D2 [ 0.205726] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205730] pci 0000:00:0d.2: PME# disabled [ 0.205762] pci 0000:00:0d.3: reg 10 32bit mmio: [0xf9ff7800-0xf9ff78ff] [ 0.205814] pci 0000:00:0d.3: supports D1 D2 [ 0.205816] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205821] pci 0000:00:0d.3: PME# disabled [ 0.205859] pci 0000:00:0f.0: reg 10 32bit mmio: [0xf9ff0000-0xf9ff3fff] [ 0.205911] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 0.205915] pci 0000:00:0f.0: PME# disabled [ 0.205993] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.206008] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.206024] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.206034] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.206042] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfdee0000-0xfdefffff] [ 0.206171] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.206175] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfdefffff] [ 0.206181] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.206249] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.206372] pci 0000:02:00.0: supports D1 [ 0.206374] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.206380] pci 0000:02:00.0: PME# disabled [ 0.206466] pci 0000:00:06.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.206525] pci 0000:00:07.0: bridge io port: [0xe000-0xefff] [ 0.206529] pci 0000:00:07.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.206536] pci 0000:00:07.0: bridge 64bit mmio pref: [0xf6000000-0xf8ffffff] [ 0.206552] pci_bus 0000:00: on NUMA node 0 [ 0.206558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.206776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.216285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.216428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.216559] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15) [ 0.216692] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 12 14 15) [ 0.216826] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.216957] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 *15) [ 0.217089] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15) [ 0.217221] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.217363] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.217366] vgaarb: loaded [ 0.217521] SCSI subsystem initialized [ 0.217653] libata version 3.00 loaded. [ 0.217726] usbcore: registered new interface driver usbfs [ 0.217738] usbcore: registered new interface driver hub [ 0.217769] usbcore: registered new device driver usb [ 0.217909] ACPI: WMI: Mapper loaded [ 0.217911] PCI: Using ACPI for IRQ routing [ 0.218198] NetLabel: Initializing [ 0.218200] NetLabel: domain hash size = 128 [ 0.218202] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218217] NetLabel: unlabeled traffic allowed by default [ 0.218247] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.218253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.218257] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.224161] Switching to clocksource tsc [ 0.226314] AppArmor: AppArmor Filesystem Enabled [ 0.226332] pnp: PnP ACPI init [ 0.226353] ACPI: bus type pnp registered [ 0.228535] pnp: PnP ACPI: found 12 devices [ 0.228537] ACPI: ACPI bus type pnp unregistered [ 0.228542] PnPBIOS: Disabled by ACPI PNP [ 0.228557] system 00:06: ioport range 0x290-0x297 has been reserved [ 0.228560] system 00:06: ioport range 0xc00-0xc05 has been reserved [ 0.228562] system 00:06: ioport range 0xd00-0xd05 has been reserved [ 0.228565] system 00:06: ioport range 0x480-0x48f has been reserved [ 0.228568] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.228570] system 00:06: ioport range 0x800-0x87f has been reserved [ 0.228573] system 00:06: ioport range 0x880-0x8ff has been reserved [ 0.228576] system 00:06: ioport range 0xc00-0xc7f could not be reserved [ 0.228579] system 00:06: ioport range 0x2000-0x20fe has been reserved [ 0.228582] system 00:06: iomem range 0xfff80000-0xffffffff has been reserved [ 0.228585] system 00:06: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.228588] system 00:06: iomem range 0xffee0000-0xffefffff has been reserved [ 0.228591] system 00:06: iomem range 0xfed10000-0xfed3ffff has been reserved [ 0.228597] system 00:09: ioport range 0x250-0x253 has been reserved [ 0.228599] system 00:09: ioport range 0x256-0x25f has been reserved [ 0.228602] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.228605] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.228611] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.228616] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.228619] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 0.228622] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.228625] system 00:0b: iomem range 0x100000-0xbfffffff could not be reserved [ 0.228628] system 00:0b: iomem range 0xe0000000-0xffffffff could not be reserved [ 0.263375] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.263381] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.263387] pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff [ 0.263392] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.263398] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.263400] pci 0000:00:06.0: IO window: disabled [ 0.263405] pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff [ 0.263409] pci 0000:00:06.0: PREFETCH window: disabled [ 0.263416] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 0.263419] pci 0000:00:07.0: IO window: 0xe000-0xefff [ 0.263424] pci 0000:00:07.0: MEM window: 0xfe000000-0xfebfffff [ 0.263429] pci 0000:00:07.0: PREFETCH window: 0x000000f6000000-0x000000f8ffffff [ 0.263451] pci 0000:00:01.0: setting latency timer to 64 [ 0.263462] pci 0000:00:06.0: setting latency timer to 64 [ 0.263501] pci 0000:00:07.0: setting latency timer to 64 [ 0.263506] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.263509] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.263511] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.263514] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfdefffff] [ 0.263516] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.263519] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.263522] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.263524] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff] [ 0.263527] pci_bus 0000:03: resource 2 pref mem [0xf6000000-0xf8ffffff] [ 0.263587] NET: Registered protocol family 2 [ 0.263727] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.264123] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.265261] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.265851] TCP: Hash tables configured (established 131072 bind 65536) [ 0.265854] TCP reno registered [ 0.265949] NET: Registered protocol family 1 [ 0.265986] alloc irq_desc for 20 on node -1 [ 0.265989] alloc kstat_irqs on node -1 [ 0.266001] pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.303503] pci 0000:00:03.0: PCI INT A disabled [ 0.303521] alloc irq_desc for 21 on node -1 [ 0.303523] alloc kstat_irqs on node -1 [ 0.303529] pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.327496] pci 0000:00:03.1: PCI INT B disabled [ 0.327515] alloc irq_desc for 22 on node -1 [ 0.327516] alloc kstat_irqs on node -1 [ 0.327523] pci 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.327541] pci 0000:00:03.3: PCI INT C disabled [ 0.327572] pci 0000:01:00.0: Boot video device [ 0.327619] Simple Boot Flag at 0x71 set to 0x1 [ 0.327823] cpufreq-nforce2: No nForce2 chipset. [ 0.327854] Scanning for low memory corruption every 60 seconds [ 0.327986] audit: initializing netlink socket (disabled) [ 0.328013] type=2000 audit(1338736265.327:1): initialized [ 0.337604] highmem bounce pool size: 64 pages [ 0.337610] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.339155] VFS: Disk quotas dquot_6.5.2 [ 0.339221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.339834] fuse init (API version 7.13) [ 0.339918] msgmni has been set to 1664 [ 0.340159] alg: No test for stdrng (krng) [ 0.340219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.340223] io scheduler noop registered [ 0.340225] io scheduler anticipatory registered [ 0.340227] io scheduler deadline registered [ 0.340263] io scheduler cfq registered (default) [ 0.340410] alloc irq_desc for 24 on node -1 [ 0.340413] alloc kstat_irqs on node -1 [ 0.340424] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.340433] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.340558] alloc irq_desc for 25 on node -1 [ 0.340560] alloc kstat_irqs on node -1 [ 0.340568] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X [ 0.340577] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.340701] alloc irq_desc for 26 on node -1 [ 0.340703] alloc kstat_irqs on node -1 [ 0.340711] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X [ 0.340720] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.340800] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.340845] Firmware did not grant requested _OSC control [ 0.340883] Firmware did not grant requested _OSC control [ 0.340900] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.341066] ACPI: AC Adapter [AC0] (on-line) [ 0.341142] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.341146] ACPI: Power Button [PWRB] [ 0.341191] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.341202] ACPI: Sleep Button [SLPB] [ 0.341245] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.342497] ACPI: Lid Switch [LID] [ 0.342540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.342542] ACPI: Power Button [PWRF] [ 0.343252] ACPI: SSDT bffce390 00202 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.343904] ACPI: SSDT bffce630 006D9 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.344373] Monitor-Mwait will be used to enter C-1 state [ 0.344400] Monitor-Mwait will be used to enter C-2 state [ 0.344406] Marking TSC unstable due to TSC halts in idle [ 0.344457] processor LNXCPU:00: registered as cooling_device0 [ 0.344828] ACPI: SSDT bffce2c0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.345200] ACPI: SSDT bffce5a0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.345511] Switching to clocksource hpet [ 0.347766] processor LNXCPU:01: registered as cooling_device1 [ 0.352290] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.352298] ACPI: Thermal Zone [THRM] (48 C) [ 0.353835] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.355220] brd: module loaded [ 0.355677] loop: module loaded [ 0.355753] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.355884] pata_sis 0000:00:02.5: version 0.5.2 [ 0.356053] scsi0 : pata_sis [ 0.356125] scsi1 : pata_sis [ 0.356724] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffe0 irq 14 [ 0.356727] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffe8 irq 15 [ 0.356764] alloc irq_desc for 17 on node -1 [ 0.356766] alloc kstat_irqs on node -1 [ 0.356773] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.356809] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.357095] Fixed MDIO Bus: probed [ 0.357132] PPP generic driver version 2.4.2 [ 0.357169] tun: Universal TUN/TAP device driver, 1.6 [ 0.357170] tun: (C) 1999-2004 Max Krasnyansky [ 0.357255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.357268] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.357282] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.357322] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.357378] ehci_hcd 0000:00:03.3: irq 22, io mem 0xf9ffd000 [ 0.357616] isapnp: Scanning for PnP cards... [ 0.407040] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.407298] usb usb1: configuration #1 chosen from 1 choice [ 0.407330] hub 1-0:1.0: USB hub found [ 0.407348] hub 1-0:1.0: 8 ports detected [ 0.407425] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.407456] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.407503] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.407551] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.407583] ohci_hcd 0000:00:03.0: irq 20, io mem 0xf9fff000 [ 0.411006] Freeing initrd memory: 7815k freed [ 0.466285] usb usb2: configuration #1 chosen from 1 choice [ 0.466322] hub 2-0:1.0: USB hub found [ 0.466344] hub 2-0:1.0: 4 ports detected [ 0.466444] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.466487] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.466531] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.466573] ohci_hcd 0000:00:03.1: irq 21, io mem 0xf9ffe000 [ 0.482804] ACPI: Battery Slot [BAT0] (battery present) [ 0.523065] usb usb3: configuration #1 chosen from 1 choice [ 0.523090] hub 3-0:1.0: USB hub found [ 0.523101] hub 3-0:1.0: 4 ports detected [ 0.523162] uhci_hcd: USB Universal Host Controller Interface driver [ 0.523325] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.525550] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.526831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.526838] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.526865] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.526886] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.526906] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.527036] mice: PS/2 mouse device common for all mice [ 0.527214] rtc_cmos 00:08: RTC can wake from S4 [ 0.527268] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.527289] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs [ 0.527391] device-mapper: uevent: version 1.0.3 [ 0.527543] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.527621] device-mapper: multipath: version 1.1.0 loaded [ 0.527624] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.527738] EISA: Probing bus 0 at eisa.0 [ 0.527748] Cannot allocate resource for EISA slot 2 [ 0.527770] EISA: Detected 0 cards. [ 0.527922] cpuidle: using governor ladder [ 0.528023] cpuidle: using governor menu [ 0.528472] TCP cubic registered [ 0.528633] NET: Registered protocol family 10 [ 0.529455] NET: Registered protocol family 17 [ 0.529921] Using IPI No-Shortcut mode [ 0.529997] PM: Resume from disk failed. [ 0.530020] registered taskstats version 1 [ 0.530378] Magic number: 0:431:183 [ 0.530498] rtc_cmos 00:08: setting system clock to 2012-06-03 15:11:05 UTC (1338736265) [ 0.530501] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.530503] EDD information not available. [ 0.564263] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.572408] ata1.00: ATA-8: WDC WD5000BEKT-22KA9T0, 01.01A01, max UDMA/133 [ 0.572412] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.625808] ata1.00: configured for UDMA/133 [ 0.712387] isapnp: No Plug & Play device found [ 0.712585] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEKT-2 01.0 PQ: 0 ANSI: 5 [ 0.712713] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.712716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.712800] ata2: port disabled. ignoring. [ 0.712808] sd 0:0:0:0: [sda] Write Protect is off [ 0.712811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.712847] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.713027] sda: [ 0.736022] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 0.769763] sda1 sda2 < sda5 > [ 0.797250] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.797274] Freeing unused kernel memory: 664k freed [ 0.797861] Write protecting the kernel text: 4700k [ 0.797898] Write protecting the kernel read-only data: 1848k [ 0.812601] udev: starting version 151 [ 0.872868] sata_sis 0000:00:05.0: version 1.0 [ 0.872890] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.872895] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode [ 0.877779] usb 1-5: configuration #1 chosen from 1 choice [ 0.899433] scsi2 : sata_sis [ 0.904659] scsi3 : sata_sis [ 0.905408] ata3: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17 [ 0.905411] ata4: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17 [ 1.068489] ata3.00: ATA-8: Hitachi HTS545050KTA300, BKFOC60G, max UDMA/133 [ 1.068494] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.088424] ata3.00: configured for UDMA/133 [ 1.088532] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54505 BKFO PQ: 0 ANSI: 5 [ 1.088661] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.088696] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.088707] sd 2:0:0:0: [sdb] Write Protect is off [ 1.088709] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.088733] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.088875] sdb: [ 1.105811] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 1.256245] ata4.00: ATAPI: MATSHITADVD-RAM UJ870BJ, 1.02, max UDMA/33 [ 1.272256] ata4.00: configured for UDMA/33 [ 1.275718] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870BJ 1.02 PQ: 0 ANSI: 5 [ 1.279516] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.279521] Uniform CD-ROM driver Revision: 3.20 [ 1.279658] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.279720] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1.428779] sdb1 sdb2 < sdb5 sdb6 > sdb3 sdb4 [ 1.476029] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.648348] Adding 9069560k swap on /dev/sda5. Priority:-1 extents:1 across:9069560k [ 3.056967] udev: starting version 151 [ 3.700079] type=1505 audit(1338736268.669:2): operation="profile_load" pid=473 name="/sbin/dhclient3" [ 3.700711] type=1505 audit(1338736268.669:3): operation="profile_load" pid=473 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 3.701063] type=1505 audit(1338736268.669:4): operation="profile_load" pid=473 name="/usr/lib/connman/scripts/dhclient-script" [ 3.713811] lp: driver loaded but no devices found [ 3.836979] alloc irq_desc for 16 on node -1 [ 3.836982] alloc kstat_irqs on node -1 [ 3.836990] ohci1394 0000:00:0d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.894031] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9ffc000-f9ffc7ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.898166] sis190 Gigabit Ethernet driver 1.3 loaded. [ 3.898183] alloc irq_desc for 19 on node -1 [ 3.898185] alloc kstat_irqs on node -1 [ 3.898190] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.898199] sis190 0000:00:04.0: setting latency timer to 64 [ 3.898210] 0000:00:04.0: Read MAC address from EEPROM [ 3.898212] 0000:00:04.0: Error EEPROM read 0. [ 3.898215] 0000:00:04.0: Read MAC address from APC. [ 3.945046] 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1 [ 3.995278] sdhci: Secure Digital Host Controller Interface driver [ 3.995281] sdhci: Copyright(c) Pierre Ossman [ 3.995937] cfg80211: Calling CRDA to update world regulatory domain [ 4.002316] acpi device:17: registered as cooling_device2 [ 4.002538] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:14/LNXVIDEO:00/input/input6 [ 4.002656] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4.088034] Linux agpgart interface v0.103 [ 4.092740] vga16fb: initializing [ 4.092743] vga16fb: mapped to 0xc00a0000 [ 4.092885] fb0: VGA16 VGA frame buffer device [ 4.281900] cfg80211: World regulatory domain updated: [ 4.281903] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.281906] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.281909] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.281911] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.281913] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.281916] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.457029] 0000:00:04.0: Using transceiver at address 1 as default. [ 4.489716] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f860ac00 (IRQ: 19), 00:23:54:f6:85:68 [ 4.489719] eth0: RGMII mode. [ 4.489725] eth0: Enabling Auto-negotiation. [ 4.521127] sdhci-pci 0000:00:0d.1: SDHCI controller found [1180:0822] (rev 22) [ 4.521245] sdhci-pci 0000:00:0d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.522344] sdhci-pci 0000:00:0d.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 4.523395] Registered led device: mmc0:: [ 4.524454] mmc0: SDHCI controller on PCI [0000:00:0d.1] using DMA [ 4.561054] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0 [ 4.603901] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 4.611879] nvidia: module license 'NVIDIA' taints kernel. [ 4.611884] Disabling lock debugging due to kernel taint [ 4.907658] Linux video capture interface: v2.00 [ 4.909715] asus_laptop: Asus Laptop Support version 0.42 [ 4.917042] asus_laptop: X71SL model detected [ 4.923133] input: Asus Laptop extra buttons as /devices/virtual/input/input8 [ 4.923834] Registered led device: asus::mail [ 4.923903] Registered led device: asus::touchpad [ 4.923934] asus_laptop: Brightness ignored, must be controlled by ACPI video driver [ 5.032984] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.032998] ath9k 0000:02:00.0: setting latency timer to 64 [ 5.149646] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.149653] nvidia 0000:01:00.0: setting latency timer to 64 [ 5.150072] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 5.285121] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001b29b81] [ 5.467890] ath: EEPROM regdomain: 0x60 [ 5.467892] ath: EEPROM indicates we should expect a direct regpair map [ 5.467896] ath: Country alpha2 being used: 00 [ 5.467897] ath: Regpair used: 0x60 [ 5.535159] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a111) [ 5.537865] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input9 [ 5.537947] usbcore: registered new interface driver uvcvideo [ 5.537984] USB Video Class driver (v0.1.0) [ 5.875969] Console: switching to colour frame buffer device 80x30 [ 5.986515] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 5.987227] Registered led device: ath9k-phy0::radio [ 5.987243] Registered led device: ath9k-phy0::assoc [ 5.987259] Registered led device: ath9k-phy0::tx [ 5.987273] Registered led device: ath9k-phy0::rx [ 5.987286] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf97a0000, irq=16 [ 6.367618] alloc irq_desc for 18 on node -1 [ 6.367621] alloc kstat_irqs on node -1 [ 6.367629] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.367671] HDA Intel 0000:00:0f.0: setting latency timer to 64 [ 6.602756] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input10 [ 9.164394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.260894] type=1505 audit(1338736274.229:5): operation="profile_replace" pid=819 name="/sbin/dhclient3" [ 9.261547] type=1505 audit(1338736274.229:6): operation="profile_replace" pid=819 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.261904] type=1505 audit(1338736274.229:7): operation="profile_replace" pid=819 name="/usr/lib/connman/scripts/dhclient-script" [ 9.514022] type=1505 audit(1338736274.482:8): operation="profile_load" pid=818 name="/usr/share/gdm/guest-session/Xsession" [ 9.556523] type=1505 audit(1338736274.525:9): operation="profile_load" pid=822 name="/usr/lib/cups/backend/cups-pdf" [ 9.557289] type=1505 audit(1338736274.525:10): operation="profile_load" pid=822 name="/usr/sbin/cupsd" [ 9.632094] type=1505 audit(1338736274.598:11): operation="profile_load" pid=820 name="/usr/bin/evince" [ 9.641433] type=1505 audit(1338736274.610:12): operation="profile_load" pid=820 name="/usr/bin/evince-previewer" [ 9.646237] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.647382] type=1505 audit(1338736274.614:13): operation="profile_load" pid=820 name="/usr/bin/evince-thumbnailer" [ 9.670865] type=1505 audit(1338736274.638:14): operation="profile_load" pid=826 name="/usr/sbin/tcpdump" [ 12.107270] ppdev: user-space parallel port driver [ 19.196025] eth0: mii ext = 0000. [ 19.220023] eth0: mii lpa=41e1 adv=01e1 exp=0007. [ 19.220027] eth0: link on 100 Mbps Full Duplex mode. [ 19.220232] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.696026] eth0: mii ext = 0000. [ 19.720025] eth0: mii lpa=41e1 adv=01e1 exp=0005. [ 19.720029] eth0: link on 100 Mbps Full Duplex mode. [ 23.888353] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 30.008022] eth0: no IPv6 routers present [ 50.125177] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 50.125201] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 50.125223] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 50.130432] wlan0: direct probe responded [ 50.130437] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 50.134347] wlan0: authenticated [ 50.134369] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 50.157811] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 50.157815] wlan0: associated [ 50.166453] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 60.196040] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 60.360017] wlan0: no IPv6 routers present [ 60.413097] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 60.612925] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 60.616518] wlan0: direct probe responded [ 60.616523] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 60.618509] wlan0: authenticated [ 60.618529] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 60.641958] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 60.641961] wlan0: associated [ 63.750547] wlan0: deauthenticated from f4:ca:e5:cc:fd:f0 (Reason: 2) [ 65.078788] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 65.082340] wlan0: direct probe responded [ 65.082344] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 65.084351] wlan0: authenticated [ 65.084367] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 65.107886] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 65.107891] wlan0: associated [ 75.141035] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 75.352980] ath9k: Two wiphys trying to scan at the same time [ 75.353069] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 75.544202] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 75.547788] wlan0: direct probe responded [ 75.547791] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 75.549785] wlan0: authenticated [ 75.549804] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 75.573365] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 75.573368] wlan0: associated [ 85.609032] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 85.820996] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 86.017050] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 86.020667] wlan0: direct probe responded [ 86.020671] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 86.022670] wlan0: authenticated [ 86.022692] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 86.046210] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 86.046213] wlan0: associated [ 96.084031] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 96.301041] ath9k: Two wiphys trying to scan at the same time [ 96.301135] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 96.500106] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 96.700033] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 2) [ 96.703575] wlan0: direct probe responded [ 96.703579] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 96.705603] wlan0: authenticated [ 96.705628] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 96.728884] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 96.728888] wlan0: associated [ 106.768036] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 106.984893] ath9k: Two wiphys trying to scan at the same time [ 106.984990] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 107.184193] wlan0: direct probe to AP f4:ca:e5:cc:fd:f0 (try 1) [ 107.187787] wlan0: direct probe responded [ 107.187791] wlan0: authenticate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 107.191271] wlan0: authenticated [ 107.191289] wlan0: associate with AP f4:ca:e5:cc:fd:f0 (try 1) [ 107.214724] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f0 (capab=0x411 status=0 aid=1) [ 107.214727] wlan0: associated [ 109.048032] wlan0: deauthenticating from f4:ca:e5:cc:fd:f0 by local choice (reason=3) [ 119.273255] wlan0: deauthenticating from f4:ca:e5:cc:fd:f1 by local choice (reason=3) [ 119.473069] wlan0: direct probe to AP f4:ca:e5:cc:fd:f1 (try 1) [ 119.476288] wlan0: direct probe responded [ 119.476292] wlan0: authenticate with AP f4:ca:e5:cc:fd:f1 (try 1) [ 119.478281] wlan0: authenticated [ 119.478298] wlan0: associate with AP f4:ca:e5:cc:fd:f1 (try 1) [ 119.501412] wlan0: RX AssocResp from f4:ca:e5:cc:fd:f1 (capab=0x401 status=0 aid=1) [ 119.501415] wlan0: associated [ 165.264044] wlan0: deauthenticating from f4:ca:e5:cc:fd:f1 by local choice (reason=3) [ 320.477057] CE: hpet increasing min_delta_ns to 40226 nsec [33696.644030] eth0: auto-negotiating... [33706.668030] eth0: auto-negotiating... [33713.312026] eth0: mii ext = 0000. [33713.336024] eth0: mii lpa=41e1 adv=01e1 exp=0007. [33713.336029] eth0: link on 100 Mbps Full Duplex mode. [33716.700030] eth0: mii ext = 0000. [33716.724039] eth0: mii lpa=41e1 adv=01e1 exp=0005. [33716.724044] eth0: link on 100 Mbps Full Duplex mode. [45097.082246] grub-probe: sending ioctl 1261 to a partition! [45097.082251] grub-probe: sending ioctl 1261 to a partition! [45100.165479] grub-probe: sending ioctl 1261 to a partition! [45100.165484] grub-probe: sending ioctl 1261 to a partition! [45100.263941] grub-probe: sending ioctl 1261 to a partition! [45100.263946] grub-probe: sending ioctl 1261 to a partition! [45100.568305] grub-probe: sending ioctl 1261 to a partition! [45100.568309] grub-probe: sending ioctl 1261 to a partition! [45100.785068] grub-probe: sending ioctl 1261 to a partition! [45100.785074] grub-probe: sending ioctl 1261 to a partition! [45102.414730] __ratelimit: 30 callbacks suppressed [45102.414734] grub-probe: sending ioctl 1261 to a partition! [45102.414737] grub-probe: sending ioctl 1261 to a partition! [45102.623284] grub-probe: sending ioctl 1261 to a partition! [45102.623289] grub-probe: sending ioctl 1261 to a partition! [45102.623950] grub-probe: sending ioctl 1261 to a partition! [45102.623953] grub-probe: sending ioctl 1261 to a partition! [45102.624597] grub-probe: sending ioctl 1261 to a partition! [45102.624599] grub-probe: sending ioctl 1261 to a partition! [45102.624912] grub-probe: sending ioctl 1261 to a partition! [45102.624915] grub-probe: sending ioctl 1261 to a partition! [45104.969439] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [45104.971526] SGI XFS Quota Management subsystem [45105.034900] JFS: nTxBlock = 8192, nTxLock = 65536 [45105.076300] NTFS driver 2.1.29 [Flags: R/O MODULE]. [45105.099087] QNX4 filesystem 0.2.3 registered. [45105.189482] Btrfs loaded [45105.598532] EXT4-fs (sdb3): mounted filesystem with ordered data mode [45105.882734] EXT4-fs (sdb4): mounted filesystem with ordered data mode [45106.876312] EXT4-fs (sdb3): mounted filesystem with ordered data mode [45107.793709] __ratelimit: 108 callbacks suppressed [45107.793713] grub-probe: sending ioctl 1261 to a partition! [45107.793716] grub-probe: sending ioctl 1261 to a partition! [45107.820490] grub-probe: sending ioctl 1261 to a partition! [45107.820493] grub-probe: sending ioctl 1261 to a partition! [45107.821255] grub-probe: sending ioctl 1261 to a partition! [45107.821258] grub-probe: sending ioctl 1261 to a partition! [45107.847569] grub-probe: sending ioctl 1261 to a partition! [45107.847573] grub-probe: sending ioctl 1261 to a partition! [45107.861041] grub-probe: sending ioctl 1261 to a partition! [45107.861044] grub-probe: sending ioctl 1261 to a partition! [49612.107898] type=1505 audit(1338785866.164:15): operation="profile_replace" pid=21885 name="/usr/share/gdm/guest-session/Xsession" [49612.177297] type=1505 audit(1338785866.236:16): operation="profile_replace" pid=21886 name="/sbin/dhclient3" [49612.177430] type=1505 audit(1338785866.236:17): operation="profile_replace" pid=21886 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [49612.177509] type=1505 audit(1338785866.236:18): operation="profile_replace" pid=21886 name="/usr/lib/connman/scripts/dhclient-script" [49612.438273] type=1505 audit(1338785866.496:19): operation="profile_replace" pid=21898 name="/usr/lib/cups/backend/cups-pdf" [49612.438529] type=1505 audit(1338785866.496:20): operation="profile_replace" pid=21898 name="/usr/sbin/cupsd" [49612.510941] type=1505 audit(1338785866.568:21): operation="profile_load" pid=21899 name="/usr/sbin/mysqld-akonadi" [49612.582218] type=1505 audit(1338785866.640:22): operation="profile_replace" pid=21900 name="/usr/sbin/tcpdump" [49616.093484] type=1505 audit(1338785870.152:23): operation="profile_replace" pid=21896 name="/usr/bin/evince" [49616.095043] type=1505 audit(1338785870.152:24): operation="profile_replace" pid=21896 name="/usr/bin/evince-previewer"