[   35.978823] vboxdrv: Found 2 processor cores.
[   35.980458] vboxdrv: fAsync=0 offMin=0x1ce offMax=0x17ad
[   35.980601] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   35.980604] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[   36.037561] vboxpci: IOMMU not found (not registered)
[   39.165354] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.167814] init: smbd main process (913) killed by HUP signal
[   39.167884] init: smbd main process ended, respawning
[   39.175474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.192535] 8139too 0000:05:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   47.828443] usb 2-4.3: device descriptor read/64, error -110
[   63.004455] usb 2-4.3: device descriptor read/64, error -110
[   63.180460] usb 2-4.3: new full-speed USB device number 7 using ehci-pci
[   73.588047] usb 2-4.3: device not accepting address 7, error -110
[   73.660328] usb 2-4.3: new full-speed USB device number 8 using ehci-pci
[   84.068065] usb 2-4.3: device not accepting address 8, error -110
[   84.068451] hub 2-4:1.0: unable to enumerate USB device on port 3
[   84.140453] usb 2-4.4: new high-speed USB device number 9 using ehci-pci
[   84.233695] usb 2-4.4: New USB device found, idVendor=05e3, idProduct=0608
[   84.233702] usb 2-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   84.233707] usb 2-4.4: Product: USB2.0 Hub
[   84.234267] hub 2-4.4:1.0: USB hub found
[   84.234698] hub 2-4.4:1.0: 4 ports detected
[   84.508320] usb 2-4.4.1: new high-speed USB device number 10 using ehci-pci
[   84.738329] usb 2-4.4.1: New USB device found, idVendor=046d, idProduct=0802
[   84.738336] usb 2-4.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[   84.738341] usb 2-4.4.1: SerialNumber: 132A4290
[   84.786771] Linux video capture interface: v2.00
[   84.804245] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
[   84.818188] input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.4/2-4.4.1/2-4.4.1:1.0/input/input12
[   84.818405] usbcore: registered new interface driver uvcvideo
[   84.818410] USB Video Class driver (1.1.1)
[   84.839706] usbcore: registered new interface driver snd-usb-audio
[  442.841026] PM: Syncing filesystems ... done.
[  443.036668] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  443.052298] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  443.068321] Suspending console(s) (use no_console_suspend to debug)
[  443.069232] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  443.069461] sd 2:0:0:0: [sda] Stopping disk
[  443.123684] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[  443.184055] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[  443.968122] PM: suspend of devices complete after 899.322 msecs
[  443.968606] PM: late suspend of devices complete after 0.479 msecs
[  443.969017] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[  443.984090] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[  443.984142] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[  443.984193] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[  443.984282] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[  444.000086] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[  444.000137] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[  444.000228] PM: noirq suspend of devices complete after 31.618 msecs
[  444.000381] ACPI: Preparing to enter system sleep state S3
[  444.005506] PM: Saving platform NVS memory
[  444.005907] Disabling non-boot CPUs ...
[  444.108023] smpboot: CPU 1 is now offline
[  444.108599] Extended CMOS year: 2000
[  444.108599] ACPI: Low-level resume complete
[  444.108599] PM: Restoring platform NVS memory
[  444.108599] Extended CMOS year: 2000
[  444.108599] CPU0: Thermal monitoring handled by SMI
[  444.108599] Enabling non-boot CPUs ...
[  444.108599] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  444.007295] CPU1: Thermal monitoring handled by SMI
[  444.120267] CPU1 is up
[  444.121445] ACPI: Waking up from system sleep state S3
[  444.304238] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[  444.304293] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[  444.320186] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[  444.336379] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[  444.336433] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[  444.336485] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[  444.352175] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[  444.368446] PM: noirq resume of devices complete after 78.443 msecs
[  444.368749] PM: early resume of devices complete after 0.261 msecs
[  444.368834] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[  444.368862] usb usb3: root hub lost power or was reset
[  444.368880] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[  444.368904] usb usb4: root hub lost power or was reset
[  444.368923] ehci-pci 0000:00:1a.7: setting latency timer to 64
[  444.369008] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[  444.369077] i915 0000:00:02.0: setting latency timer to 64
[  444.369146] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[  444.369170] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  444.369195] usb usb5: root hub lost power or was reset
[  444.369211] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  444.369235] usb usb6: root hub lost power or was reset
[  444.369251] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  444.369275] usb usb7: root hub lost power or was reset
[  444.369292] ehci-pci 0000:00:1d.7: setting latency timer to 64
[  444.369315] pci 0000:00:1e.0: setting latency timer to 64
[  444.369330] ata_piix 0000:00:1f.1: setting latency timer to 64
[  444.369343] ahci 0000:00:1f.2: setting latency timer to 64
[  444.371765] ata2: port disabled--ignoring
[  444.584103] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[  444.588373] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[  444.588376] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[  444.604268] ata1.00: configured for UDMA/33
[  444.700050] ata4: SATA link down (SStatus 0 SControl 300)
[  444.708058] ata5: SATA link down (SStatus 0 SControl 300)
[  444.714559] Extended CMOS year: 2000
[  444.788440] usb 2-4.4.1: reset high-speed USB device number 10 using ehci-pci
[  445.019437] snd-usb-audio 2-4.4.1:1.2: no reset_resume for driver snd-usb-audio?
[  445.019440] snd-usb-audio 2-4.4.1:1.3: no reset_resume for driver snd-usb-audio?
[  445.868098] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  445.869051] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  445.869230] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[  445.869233] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  445.871225] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  445.871393] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[  445.871396] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[  445.872330] ata3.00: configured for UDMA/100
[  445.888157] sd 2:0:0:0: [sda] Starting disk
[  445.981212] PM: resume of devices complete after 1612.457 msecs
[  446.511815] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  446.512194] ieee80211 phy1: hwaddr 00:16:44:72:a3:1e, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[  446.533737] rtl8187: Customer ID is 0x04
[  446.534600] rtl8187: wireless switch is on
[  446.535174] Restarting tasks ... done.
[  446.563611] video LNXVIDEO:00: Restoring backlight state
[  446.620476] usb 2-4.3: new full-speed USB device number 11 using ehci-pci
[  447.257160] 8139too 0000:05:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  451.097502] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  451.098666] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  461.692470] usb 2-4.3: device descriptor read/64, error -110
[  476.868472] usb 2-4.3: device descriptor read/64, error -110
[  477.044472] usb 2-4.3: new full-speed USB device number 12 using ehci-pci
[  492.116474] usb 2-4.3: device descriptor read/64, error -110
[  507.292354] usb 2-4.3: device descriptor read/64, error -110
[  507.468473] usb 2-4.3: new full-speed USB device number 13 using ehci-pci
[  517.876090] usb 2-4.3: device not accepting address 13, error -110
[  517.948368] usb 2-4.3: new full-speed USB device number 14 using ehci-pci
[  528.356095] usb 2-4.3: device not accepting address 14, error -110
[  528.356489] hub 2-4:1.0: unable to enumerate USB device on port 3
[ 1831.200231] PM: Syncing filesystems ... done.
[ 1831.420608] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1831.436277] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1831.452300] Suspending console(s) (use no_console_suspend to debug)
[ 1831.453191] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1831.453382] sd 2:0:0:0: [sda] Stopping disk
[ 1831.507594] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[ 1831.576064] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[ 1832.428108] PM: suspend of devices complete after 975.327 msecs
[ 1832.428592] PM: late suspend of devices complete after 0.479 msecs
[ 1832.429004] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 1832.444083] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 1832.444135] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 1832.444186] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 1832.444388] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 1832.460076] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 1832.460127] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 1832.460217] PM: noirq suspend of devices complete after 31.620 msecs
[ 1832.460369] ACPI: Preparing to enter system sleep state S3
[ 1832.467775] PM: Saving platform NVS memory
[ 1832.468201] Disabling non-boot CPUs ...
[ 1832.572037] smpboot: CPU 1 is now offline
[ 1832.572576] Extended CMOS year: 2000
[ 1832.572576] ACPI: Low-level resume complete
[ 1832.572576] PM: Restoring platform NVS memory
[ 1832.572576] Extended CMOS year: 2000
[ 1832.572576] CPU0: Thermal monitoring handled by SMI
[ 1832.572576] Enabling non-boot CPUs ...
[ 1832.572576] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1832.469575] CPU1: Thermal monitoring handled by SMI
[ 1832.584232] CPU1 is up
[ 1832.585417] ACPI: Waking up from system sleep state S3
[ 1832.768222] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 1832.768277] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 1832.784185] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 1832.800381] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 1832.800434] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 1832.800486] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 1832.816179] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1832.832444] PM: noirq resume of devices complete after 78.445 msecs
[ 1832.832746] PM: early resume of devices complete after 0.260 msecs
[ 1832.832816] i915 0000:00:02.0: setting latency timer to 64
[ 1832.832901] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1832.832928] usb usb3: root hub lost power or was reset
[ 1832.832945] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1832.832969] usb usb4: root hub lost power or was reset
[ 1832.832987] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 1832.833070] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 1832.833168] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[ 1832.833189] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1832.833214] usb usb5: root hub lost power or was reset
[ 1832.833229] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1832.833253] usb usb6: root hub lost power or was reset
[ 1832.833268] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1832.833292] usb usb7: root hub lost power or was reset
[ 1832.833309] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1832.833330] pci 0000:00:1e.0: setting latency timer to 64
[ 1832.833345] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1832.833359] ahci 0000:00:1f.2: setting latency timer to 64
[ 1832.834223] ata2: port disabled--ignoring
[ 1833.048109] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[ 1833.056365] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 1833.056368] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1833.072278] ata1.00: configured for UDMA/33
[ 1833.156088] ata4: SATA link down (SStatus 0 SControl 300)
[ 1833.164060] ata5: SATA link down (SStatus 0 SControl 300)
[ 1833.252417] usb 2-4.4.1: reset high-speed USB device number 10 using ehci-pci
[ 1833.478037] restoring control 00000000-0000-0000-0000-000000000001/2/3
[ 1833.489790] snd-usb-audio 2-4.4.1:1.2: no reset_resume for driver snd-usb-audio?
[ 1833.489793] snd-usb-audio 2-4.4.1:1.3: no reset_resume for driver snd-usb-audio?
[ 1834.392099] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1834.393002] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1834.430474] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1834.430477] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1834.432444] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1834.432635] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1834.432638] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1834.433574] ata3.00: configured for UDMA/100
[ 1834.448160] sd 2:0:0:0: [sda] Starting disk
[ 1834.549159] PM: resume of devices complete after 1716.407 msecs
[ 1835.080919] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 1835.081263] ieee80211 phy2: hwaddr 00:16:44:72:a3:1e, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 1835.102709] rtl8187: Customer ID is 0x04
[ 1835.103573] rtl8187: wireless switch is on
[ 1835.104195] Restarting tasks ... done.
[ 1835.122512] video LNXVIDEO:00: Restoring backlight state
[ 1835.184431] usb 2-4.3: new full-speed USB device number 15 using ehci-pci
[ 1836.074312] 8139too 0000:05:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 1839.973437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1839.974035] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1850.256427] usb 2-4.3: device descriptor read/64, error -110
[ 1865.432454] usb 2-4.3: device descriptor read/64, error -110
[ 1865.608451] usb 2-4.3: new full-speed USB device number 16 using ehci-pci
[ 1880.680437] usb 2-4.3: device descriptor read/64, error -110
[ 1895.856307] usb 2-4.3: device descriptor read/64, error -110
[ 1896.032428] usb 2-4.3: new full-speed USB device number 17 using ehci-pci
[ 1906.440046] usb 2-4.3: device not accepting address 17, error -110
[ 1906.512440] usb 2-4.3: new full-speed USB device number 18 using ehci-pci
[ 1916.920055] usb 2-4.3: device not accepting address 18, error -110
[ 1916.920448] hub 2-4:1.0: unable to enumerate USB device on port 3
[18304.925903] PM: Syncing filesystems ... done.
[18305.668678] Freezing user space processes ... (elapsed 0.09 seconds) done.
[18305.764260] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18305.780295] Suspending console(s) (use no_console_suspend to debug)
[18305.781142] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[18305.835573] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[18305.896058] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[18305.900331] sd 2:0:0:0: [sda] Stopping disk
[18306.808108] PM: suspend of devices complete after 1027.332 msecs
[18306.808590] PM: late suspend of devices complete after 0.478 msecs
[18306.809001] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[18306.824103] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[18306.824156] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[18306.824208] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[18306.824412] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[18306.840079] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[18306.840130] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[18306.840222] PM: noirq suspend of devices complete after 31.627 msecs
[18306.840373] ACPI: Preparing to enter system sleep state S3
[18306.845342] PM: Saving platform NVS memory
[18306.845728] Disabling non-boot CPUs ...
[18306.948027] smpboot: CPU 1 is now offline
[18306.948560] Extended CMOS year: 2000
[18306.948560] ACPI: Low-level resume complete
[18306.948560] PM: Restoring platform NVS memory
[18306.948560] Extended CMOS year: 2000
[18306.948560] CPU0: Thermal monitoring handled by SMI
[18306.948560] Enabling non-boot CPUs ...
[18306.948560] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18306.847037] CPU1: Thermal monitoring handled by SMI
[18306.960213] CPU1 is up
[18306.961378] ACPI: Waking up from system sleep state S3
[18307.144227] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[18307.144282] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[18307.160182] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[18307.176383] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[18307.176436] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[18307.176489] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[18307.192179] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[18307.208444] PM: noirq resume of devices complete after 78.438 msecs
[18307.208749] PM: early resume of devices complete after 0.261 msecs
[18307.208816] i915 0000:00:02.0: setting latency timer to 64
[18307.209147] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[18307.209173] usb usb3: root hub lost power or was reset
[18307.209191] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[18307.209215] usb usb4: root hub lost power or was reset
[18307.209233] ehci-pci 0000:00:1a.7: setting latency timer to 64
[18307.209319] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[18307.209416] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[18307.209438] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[18307.209462] usb usb5: root hub lost power or was reset
[18307.209477] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[18307.209502] usb usb6: root hub lost power or was reset
[18307.209517] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[18307.209541] usb usb7: root hub lost power or was reset
[18307.209559] ehci-pci 0000:00:1d.7: setting latency timer to 64
[18307.209580] pci 0000:00:1e.0: setting latency timer to 64
[18307.209595] ata_piix 0000:00:1f.1: setting latency timer to 64
[18307.209608] ahci 0000:00:1f.2: setting latency timer to 64
[18307.212074] ata2: port disabled--ignoring
[18307.428059] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[18307.428416] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[18307.428419] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[18307.444259] ata1.00: configured for UDMA/33
[18307.532062] ata4: SATA link down (SStatus 0 SControl 300)
[18307.540069] ata5: SATA link down (SStatus 0 SControl 300)
[18307.632416] usb 2-4.4.1: reset high-speed USB device number 10 using ehci-pci
[18307.858287] restoring control 00000000-0000-0000-0000-000000000001/2/3
[18307.869663] snd-usb-audio 2-4.4.1:1.2: no reset_resume for driver snd-usb-audio?
[18307.869666] snd-usb-audio 2-4.4.1:1.3: no reset_resume for driver snd-usb-audio?
[18308.764097] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18308.765006] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18308.806002] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[18308.806005] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18308.880145] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18308.880266] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[18308.880269] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18308.880847] ata3.00: configured for UDMA/100
[18308.896158] sd 2:0:0:0: [sda] Starting disk
[18308.913452] PM: resume of devices complete after 1704.697 msecs
[18309.210676] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[18309.211031] ieee80211 phy3: hwaddr 00:16:44:72:a3:1e, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[18309.232461] rtl8187: Customer ID is 0x04
[18309.233325] rtl8187: wireless switch is on
[18309.233902] Restarting tasks ... done.
[18309.249909] video LNXVIDEO:00: Restoring backlight state
[18309.312417] usb 2-4.3: new full-speed USB device number 19 using ehci-pci
[18311.344058] 8139too 0000:05:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[18315.217446] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18315.218054] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18324.384434] usb 2-4.3: device descriptor read/64, error -110
[18339.560434] usb 2-4.3: device descriptor read/64, error -110
[18339.736429] usb 2-4.3: new full-speed USB device number 20 using ehci-pci
[18354.808451] usb 2-4.3: device descriptor read/64, error -110
[18369.984430] usb 2-4.3: device descriptor read/64, error -110
[18370.160457] usb 2-4.3: new full-speed USB device number 21 using ehci-pci
[18380.568082] usb 2-4.3: device not accepting address 21, error -110
[18380.640441] usb 2-4.3: new full-speed USB device number 22 using ehci-pci
[18391.048090] usb 2-4.3: device not accepting address 22, error -110
[18391.048457] hub 2-4:1.0: unable to enumerate USB device on port 3
[40116.523050] 8139too 0000:05:07.0 eth0: link down
[40116.551901] usb 2-4: USB disconnect, device number 2
[40116.551913] usb 2-4.1: USB disconnect, device number 3
[40116.557488] usb 2-4.2: USB disconnect, device number 4
[40116.584132] usb 2-4.4: USB disconnect, device number 9
[40116.584141] usb 2-4.4.1: USB disconnect, device number 10
[40118.087686] 8139too 0000:05:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[40127.536734] 8139too 0000:05:07.0 eth0: link down
[40980.611289] asus_laptop: Unknown key 57 pressed
[41030.741213] wlan0: authenticate with c8:64:c7:0f:3e:9e
[41030.816199] wlan0: send auth to c8:64:c7:0f:3e:9e (try 1/3)
[41030.820166] wlan0: authenticated
[41030.824203] wlan0: associate with c8:64:c7:0f:3e:9e (try 1/3)
[41030.834429] wlan0: RX AssocResp from c8:64:c7:0f:3e:9e (capab=0x431 status=0 aid=2)
[41030.838203] wlan0: associated
[41030.838283] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[41030.838517] cfg80211: Calling CRDA for country: GR
[41031.315797] cfg80211: Regulatory domain changed to country: GR
[41031.315805] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[41031.315809] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41031.315812] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41031.315815] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41031.315818] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[41040.867442] wlan0: disassociating from c8:64:c7:0f:3e:9e by local choice (reason=3)
[41040.949826] cfg80211: Calling CRDA to update world regulatory domain
[41040.950226] wlan0: deauthenticating from c8:64:c7:0f:3e:9e by local choice (reason=3)
[41040.966980] cfg80211: World regulatory domain updated:
[41040.966991] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[41040.966998] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[41040.967005] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[41040.967011] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[41040.967018] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[41040.967024] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[41355.913029] wlan0: authenticate with c8:64:c7:0f:3e:9e
[41355.983375] wlan0: send auth to c8:64:c7:0f:3e:9e (try 1/3)
[41355.989621] wlan0: authenticated
[41355.992095] wlan0: associate with c8:64:c7:0f:3e:9e (try 1/3)
[41356.002011] wlan0: RX AssocResp from c8:64:c7:0f:3e:9e (capab=0x431 status=0 aid=2)
[41356.006006] wlan0: associated
[41356.006193] cfg80211: Calling CRDA for country: GR
[41356.017585] cfg80211: Regulatory domain changed to country: GR
[41356.017591] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[41356.017595] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41356.017598] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41356.017601] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41356.017604] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[41366.019749] wlan0: disassociating from c8:64:c7:0f:3e:9e by local choice (reason=3)
[41366.097669] cfg80211: Calling CRDA to update world regulatory domain
[41366.098045] wlan0: deauthenticating from c8:64:c7:0f:3e:9e by local choice (reason=3)
[41366.111541] cfg80211: World regulatory domain updated:
[41366.111550] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[41366.111554] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[41366.111557] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[41366.111561] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[41366.111564] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[41366.111567] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[41375.953072] wlan0: authenticate with c8:64:c7:0f:3e:9e
[41376.023379] wlan0: send auth to c8:64:c7:0f:3e:9e (try 1/3)
[41376.027371] wlan0: authenticated
[41376.028203] wlan0: associate with c8:64:c7:0f:3e:9e (try 1/3)
[41376.037429] wlan0: RX AssocResp from c8:64:c7:0f:3e:9e (capab=0x431 status=0 aid=2)
[41376.041280] wlan0: associated
[41376.041479] cfg80211: Calling CRDA for country: GR
[41376.051319] cfg80211: Regulatory domain changed to country: GR
[41376.051326] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[41376.051330] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41376.051334] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41376.051337] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[41376.051340] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[44443.213127] asus_laptop: Unknown key 58 pressed