80 4294892641
[331247.296028] 12 80 4294900772
[331247.296030]  0 90 4294900772
[331247.296031] 13 90 4294900772
[331247.296033]  0 90 4294900772
[331247.296035] 1a 90 4294900772
[331247.296036]  0 90 4294900772
[331247.296038]  3 90 4294900772
[331247.296040] c1 90 4294900772
[331247.296041] 10 90 4294900772
[331247.296043]  7 80 4294900772
[331247.296044]  0 90 4294900772
[331247.296046]  8 81 4294900853
[331247.296048] last result at 4294900853
[331247.296049] last redo_fd_request at 78039339
[331247.296051] 70  0 
[331247.296062] status=19
[331247.296063] fdc_busy=1
[331247.296064] do_floppy=f8092770
[331247.296066] cont=f809b904
[331247.296067] current_req=(null)
[331247.296069] command_status=-1
[331247.296070] 
[331247.296073] floppy0: floppy timeout called
[331247.556008] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[331247.972007] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[331248.138882] usblp 3-2:1.0: no reset_resume for driver usblp?
[331248.138957] usblp0: removed
[331248.141923] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[331248.141995] PM: resume devices took 10.892 seconds
[331248.141997] ------------[ cut here ]------------
[331248.142006] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[331248.142008] Hardware name: System Product Name
[331248.142010] Component: resume devices, time: 10892
[331248.142012] Modules linked in: nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[331248.142041] Pid: 22211, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[331248.142043] Call Trace:
[331248.142050]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[331248.142054]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[331248.142058]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[331248.142062]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[331248.142065]  [<c0174e34>] suspend_test_finish+0x84/0x90
[331248.142069]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[331248.142073]  [<c056e92c>] ? printk+0x18/0x1c
[331248.142077]  [<c0174d09>] enter_state+0xb9/0xf0
[331248.142080]  [<c01743fd>] state_store+0x6d/0xb0
[331248.142083]  [<c0174390>] ? state_store+0x0/0xb0
[331248.142088]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[331248.142093]  [<c0239790>] sysfs_write_file+0x90/0x100
[331248.142097]  [<c01e792a>] vfs_write+0x9a/0x190
[331248.142101]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[331248.142105]  [<c057325b>] ? do_page_fault+0x19b/0x380
[331248.142109]  [<c01e83ed>] sys_write+0x3d/0x70
[331248.142112]  [<c010336c>] syscall_call+0x7/0xb
[331248.142115] ---[ end trace 9a0c1914c1210409 ]---
[331248.142152] PM: Finishing wakeup.
[331248.142154] Restarting tasks ... done.
[331250.081829] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[331250.081850] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[331250.081922] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[331250.081933] [drm] Loading R200 Microcode
[331250.216488] skge eth0: enabling interface
[331250.219822] ADDRCONF(NETDEV_UP): eth0: link is not ready
[331252.023241] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[331252.023460] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[331262.952008] eth0: no IPv6 routers present
[348420.786814] skge eth0: disabling interface
[348423.525576] PM: Syncing filesystems ... done.
[348423.532078] PM: Preparing system for mem sleep
[348423.532083] Freezing user space processes ... (elapsed 0.00 seconds) done.
[348423.534106] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[348423.534195] PM: Entering mem sleep
[348423.534210] Suspending console(s) (use no_console_suspend to debug)
[348423.564016] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[348423.564105] sd 0:0:1:0: [sdb] Stopping disk
[348423.688954] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[348423.689013] sd 0:0:0:0: [sda] Stopping disk
[348424.320387] serial 00:0a: disabled
[348424.320410] pci 0000:01:00.0: PCI INT A disabled
[348424.320991] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[348424.336010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[348424.336016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[348424.336021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[348424.336026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[348424.336031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[348424.336106] pata_via 0000:00:0f.1: PCI INT A disabled
[348424.336161] sata_via 0000:00:0f.0: PCI INT B disabled
[348424.352703] skge 0000:00:0a.0: PME# enabled
[348424.384020] PM: suspend devices took 0.852 seconds
[348424.384157] ehci_hcd 0000:00:10.4: PME# disabled
[348424.400031] uhci_hcd 0000:00:10.3: PME# disabled
[348424.416030] uhci_hcd 0000:00:10.2: PME# disabled
[348424.432030] uhci_hcd 0000:00:10.1: PME# disabled
[348424.448030] uhci_hcd 0000:00:10.0: PME# disabled
[348424.464235] ACPI: Preparing to enter system sleep state S3
[348424.464753] Disabling non-boot CPUs ...
[348424.464814] Extended CMOS year: 2000
[348424.464814] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[348424.464814] Back to C!
[348424.464814] Extended CMOS year: 2000
[348424.464814] ACPI: Waking up from system sleep state S3
[348424.464814] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[348424.464814] uhci_hcd 0000:00:10.0: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[348424.464814] uhci_hcd 0000:00:10.1: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[348424.464814] uhci_hcd 0000:00:10.2: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[348424.464814] uhci_hcd 0000:00:10.3: PME# disabled
[348424.464814] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[348424.464814] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[348424.464814] ehci_hcd 0000:00:10.4: PME# disabled
[348424.464814] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[348424.464814] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[348424.464814] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[348424.464814] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[348424.464814] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[348424.464814] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[348424.464814] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[348424.464814] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[348424.464814] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[348424.464814] pci 0000:00:01.0: setting latency timer to 64
[348424.464814] skge 0000:00:0a.0: PME# disabled
[348424.464814] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[348424.464814] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[348424.464814] uhci_hcd 0000:00:10.0: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[348424.464814] usb usb2: root hub lost power or was reset
[348424.464814] uhci_hcd 0000:00:10.1: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[348424.464814] usb usb3: root hub lost power or was reset
[348424.464814] uhci_hcd 0000:00:10.2: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[348424.464814] usb usb4: root hub lost power or was reset
[348424.464814] uhci_hcd 0000:00:10.3: PME# disabled
[348424.464814] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[348424.464814] usb usb5: root hub lost power or was reset
[348424.464814] ehci_hcd 0000:00:10.4: PME# disabled
[348424.464814] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[348424.464814] pci 0000:00:11.0: PME# disabled
[348424.464814] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[348424.464814] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[348424.474549] pci 0000:00:11.6: PME# disabled
[348424.474554] pci 0000:01:00.0: PME# disabled
[348424.474560] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[348424.474565] pci 0000:01:00.1: PME# disabled
[348424.475216] serial 00:0a: activated
[348424.635166] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[348424.646237] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[348424.646241] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[348424.660228] ata2.00: configured for UDMA/33
[348424.676263] ata2.01: configured for UDMA/33
[348425.116072] sd 0:0:0:0: [sda] Starting disk
[348429.516006] ata1: link is slow to respond, please be patient (ready=0)
[348431.304335] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[348431.304339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[348431.305859] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[348431.320335] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[348431.320339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[348431.321876] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[348431.345761] ata1.00: configured for UDMA/133
[348431.361770] ata1.01: configured for UDMA/133
[348431.393770] ata1.00: configured for UDMA/133
[348431.409766] ata1.01: configured for UDMA/133
[348431.409768] ata1: EH complete
[348431.427704] sd 0:0:1:0: [sdb] Starting disk
[348434.444003] 
[348434.444004] floppy driver state
[348434.444006] -------------------
[348434.444009] now=87033611 last interrupt=4294900853 diff=87100054 last called handler=f8096500
[348434.444011] timeout_message=lock fdc
[348434.444012] last output bytes:
[348434.444014] 12 90 4294892640
[348434.444016]  0 90 4294892640
[348434.444018] 14 90 4294892640
[348434.444020] 18 80 4294892641
[348434.444022]  8 80 4294892641
[348434.444023]  8 80 4294892641
[348434.444025]  8 80 4294892641
[348434.444027]  8 80 4294892641
[348434.444028] 12 80 4294900772
[348434.444030]  0 90 4294900772
[348434.444032] 13 90 4294900772
[348434.444034]  0 90 4294900772
[348434.444035] 1a 90 4294900772
[348434.444037]  0 90 4294900772
[348434.444039]  3 90 4294900772
[348434.444040] c1 90 4294900772
[348434.444042] 10 90 4294900772
[348434.444044]  7 80 4294900772
[348434.444046]  0 90 4294900772
[348434.444047]  8 81 4294900853
[348434.444049] last result at 4294900853
[348434.444050] last redo_fd_request at 82736824
[348434.444052] 70  0 
[348434.444063] status=19
[348434.444064] fdc_busy=1
[348434.444066] do_floppy=f8092770
[348434.444067] cont=f809b904
[348434.444069] current_req=(null)
[348434.444070] command_status=-1
[348434.444072] 
[348434.444075] floppy0: floppy timeout called
[348434.704008] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[348435.120007] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[348435.286915] usblp 3-2:1.0: no reset_resume for driver usblp?
[348435.286992] usblp0: removed
[348435.289956] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[348435.290027] PM: resume devices took 10.824 seconds
[348435.290029] ------------[ cut here ]------------
[348435.290038] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[348435.290040] Hardware name: System Product Name
[348435.290042] Component: resume devices, time: 10824
[348435.290044] Modules linked in: nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[348435.290073] Pid: 23447, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[348435.290075] Call Trace:
[348435.290082]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[348435.290086]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[348435.290090]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[348435.290094]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[348435.290097]  [<c0174e34>] suspend_test_finish+0x84/0x90
[348435.290101]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[348435.290105]  [<c056e92c>] ? printk+0x18/0x1c
[348435.290109]  [<c0174d09>] enter_state+0xb9/0xf0
[348435.290112]  [<c01743fd>] state_store+0x6d/0xb0
[348435.290116]  [<c0174390>] ? state_store+0x0/0xb0
[348435.290120]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[348435.290125]  [<c0239790>] sysfs_write_file+0x90/0x100
[348435.290130]  [<c01e792a>] vfs_write+0x9a/0x190
[348435.290133]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[348435.290138]  [<c057325b>] ? do_page_fault+0x19b/0x380
[348435.290141]  [<c01e83ed>] sys_write+0x3d/0x70
[348435.290145]  [<c010336c>] syscall_call+0x7/0xb
[348435.290147] ---[ end trace 9a0c1914c121040a ]---
[348435.290184] PM: Finishing wakeup.
[348435.290186] Restarting tasks ... 
[348435.291089] hub 1-0:1.0: over-current change on port 1
[348435.312664] done.
[348435.392019] hub 1-0:1.0: over-current change on port 2
[348435.496415] hub 1-0:1.0: over-current change on port 3
[348435.600020] hub 1-0:1.0: over-current change on port 4
[348435.704032] hub 1-0:1.0: over-current change on port 5
[348435.812006] hub 1-0:1.0: over-current change on port 6
[348435.920017] hub 1-0:1.0: over-current change on port 7
[348436.024020] hub 1-0:1.0: over-current change on port 8
[348437.541880] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[348437.541901] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[348437.541972] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[348437.541983] [drm] Loading R200 Microcode
[348438.648052] skge eth0: enabling interface
[348438.651395] ADDRCONF(NETDEV_UP): eth0: link is not ready
[348440.628501] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[348440.628721] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[348450.672006] eth0: no IPv6 routers present
[352529.736026] usb 1-8: new high speed USB device using ehci_hcd and address 4
[352529.869193] usb 1-8: configuration #1 chosen from 1 choice
[352530.188241] Initializing USB Mass Storage driver...
[352530.191433] scsi4 : SCSI emulation for USB Mass Storage devices
[352530.191634] usbcore: registered new interface driver usb-storage
[352530.191639] USB Mass Storage support registered.
[352530.192402] usb-storage: device found at 4
[352530.192405] usb-storage: waiting for device to settle before scanning
[352535.192147] usb-storage: device scan complete
[352535.193006] scsi 4:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[352535.193412] sd 4:0:0:0: Attached scsi generic sg4 type 0
[352535.209786] sd 4:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[352535.210605] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
[352535.210609] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[352535.212230] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
[352535.212233] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[352535.212236]  sdc: sdc1
[352535.227854] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
[352535.227859] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[352535.227864] sd 4:0:0:0: [sdc] Attached SCSI disk
[352732.982036] type=1505 audit(1288960492.674:17): operation="profile_replace" pid=25667 name=/usr/lib/cups/backend/cups-pdf
[352732.982378] type=1505 audit(1288960492.674:18): operation="profile_replace" pid=25667 name=/usr/sbin/cupsd
[355640.116022] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[359240.112028] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[362840.112027] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[366440.112025] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[370040.112023] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[373640.112024] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[377240.112078] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[380840.112022] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[384440.112023] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[388040.112024] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[391640.112025] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[391821.600840] skge eth0: disabling interface
[391824.155769] PM: Syncing filesystems ... done.
[391824.162059] PM: Preparing system for mem sleep
[391824.162064] Freezing user space processes ... (elapsed 0.00 seconds) done.
[391824.164157] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[391824.164249] PM: Entering mem sleep
[391824.164264] Suspending console(s) (use no_console_suspend to debug)
[391824.212014] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[391824.212104] sd 0:0:1:0: [sdb] Stopping disk
[391824.333163] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[391824.456677] sd 0:0:0:0: [sda] Stopping disk
[391825.092387] serial 00:0a: disabled
[391825.092410] pci 0000:01:00.0: PCI INT A disabled
[391825.092987] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[391825.108011] ehci_hcd 0000:00:10.4: PCI INT C disabled
[391825.108016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[391825.108021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[391825.108026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[391825.108031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[391825.108107] pata_via 0000:00:0f.1: PCI INT A disabled
[391825.108163] sata_via 0000:00:0f.0: PCI INT B disabled
[391825.124702] skge 0000:00:0a.0: PME# enabled
[391825.156020] PM: suspend devices took 0.992 seconds
[391825.156157] ehci_hcd 0000:00:10.4: PME# disabled
[391825.172031] uhci_hcd 0000:00:10.3: PME# disabled
[391825.188030] uhci_hcd 0000:00:10.2: PME# disabled
[391825.204030] uhci_hcd 0000:00:10.1: PME# disabled
[391825.220030] uhci_hcd 0000:00:10.0: PME# disabled
[391825.236234] ACPI: Preparing to enter system sleep state S3
[391825.236743] Disabling non-boot CPUs ...
[391825.236804] Extended CMOS year: 2000
[391825.236804] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[391825.236804] Back to C!
[391825.236804] Extended CMOS year: 2000
[391825.236804] ACPI: Waking up from system sleep state S3
[391825.236804] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[391825.236804] uhci_hcd 0000:00:10.0: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[391825.236804] uhci_hcd 0000:00:10.1: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[391825.236804] uhci_hcd 0000:00:10.2: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[391825.236804] uhci_hcd 0000:00:10.3: PME# disabled
[391825.236804] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[391825.236804] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[391825.236804] ehci_hcd 0000:00:10.4: PME# disabled
[391825.236804] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[391825.236804] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[391825.236804] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[391825.236804] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[391825.236804] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[391825.236804] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[391825.236804] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[391825.236804] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[391825.236804] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[391825.236804] pci 0000:00:01.0: setting latency timer to 64
[391825.236804] skge 0000:00:0a.0: PME# disabled
[391825.236804] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[391825.236804] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[391825.236804] uhci_hcd 0000:00:10.0: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[391825.236804] usb usb2: root hub lost power or was reset
[391825.236804] uhci_hcd 0000:00:10.1: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[391825.236804] usb usb3: root hub lost power or was reset
[391825.236804] uhci_hcd 0000:00:10.2: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[391825.236804] usb usb4: root hub lost power or was reset
[391825.236804] uhci_hcd 0000:00:10.3: PME# disabled
[391825.236804] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[391825.236804] usb usb5: root hub lost power or was reset
[391825.236804] ehci_hcd 0000:00:10.4: PME# disabled
[391825.236804] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[391825.236804] pci 0000:00:11.0: PME# disabled
[391825.236804] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[391825.236804] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[391825.246581] pci 0000:00:11.6: PME# disabled
[391825.246586] pci 0000:01:00.0: PME# disabled
[391825.246591] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[391825.246597] pci 0000:01:00.1: PME# disabled
[391825.247253] serial 00:0a: activated
[391825.407202] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[391825.418261] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[391825.418264] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[391825.432223] ata2.00: configured for UDMA/33
[391825.448263] ata2.01: configured for UDMA/33
[391825.992071] sd 0:0:0:0: [sda] Starting disk
[391830.288006] ata1: link is slow to respond, please be patient (ready=0)
[391832.300335] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[391832.300339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[391832.301876] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[391832.316335] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[391832.316339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[391832.317860] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[391832.341768] ata1.00: configured for UDMA/133
[391832.357753] ata1.01: configured for UDMA/133
[391832.389753] ata1.00: configured for UDMA/133
[391832.405749] ata1.01: configured for UDMA/133
[391832.405752] ata1: EH complete
[391832.424330] sd 0:0:1:0: [sdb] Starting disk
[391835.444003] 
[391835.444004] floppy driver state
[391835.444006] -------------------
[391835.444009] now=97883861 last interrupt=4294900853 diff=97950304 last called handler=f8096500
[391835.444011] timeout_message=lock fdc
[391835.444012] last output bytes:
[391835.444014] 12 90 4294892640
[391835.444016]  0 90 4294892640
[391835.444018] 14 90 4294892640
[391835.444019] 18 80 4294892641
[391835.444021]  8 80 4294892641
[391835.444023]  8 80 4294892641
[391835.444024]  8 80 4294892641
[391835.444026]  8 80 4294892641
[391835.444028] 12 80 4294900772
[391835.444029]  0 90 4294900772
[391835.444031] 13 90 4294900772
[391835.444033]  0 90 4294900772
[391835.444034] 1a 90 4294900772
[391835.444036]  0 90 4294900772
[391835.444038]  3 90 4294900772
[391835.444039] c1 90 4294900772
[391835.444041] 10 90 4294900772
[391835.444043]  7 80 4294900772
[391835.444044]  0 90 4294900772
[391835.444046]  8 81 4294900853
[391835.444047] last result at 4294900853
[391835.444049] last redo_fd_request at 87033611
[391835.444050] 70  0 
[391835.444062] status=19
[391835.444063] fdc_busy=1
[391835.444064] do_floppy=f8092770
[391835.444066] cont=f809b904
[391835.444067] current_req=(null)
[391835.444069] command_status=-1
[391835.444070] 
[391835.444073] floppy0: floppy timeout called
[391835.704016] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[391836.120007] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[391836.286891] usblp 3-2:1.0: no reset_resume for driver usblp?
[391836.286964] usblp0: removed
[391836.289929] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[391836.290002] PM: resume devices took 11.052 seconds
[391836.290004] ------------[ cut here ]------------
[391836.290012] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[391836.290015] Hardware name: System Product Name
[391836.290016] Component: resume devices, time: 11052
[391836.290018] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[391836.290048] Pid: 26225, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[391836.290050] Call Trace:
[391836.290057]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[391836.290061]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[391836.290065]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[391836.290069]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[391836.290072]  [<c0174e34>] suspend_test_finish+0x84/0x90
[391836.290076]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[391836.290080]  [<c056e92c>] ? printk+0x18/0x1c
[391836.290084]  [<c0174d09>] enter_state+0xb9/0xf0
[391836.290087]  [<c01743fd>] state_store+0x6d/0xb0
[391836.290090]  [<c0174390>] ? state_store+0x0/0xb0
[391836.290095]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[391836.290100]  [<c0239790>] sysfs_write_file+0x90/0x100
[391836.290105]  [<c01e792a>] vfs_write+0x9a/0x190
[391836.290108]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[391836.290113]  [<c057325b>] ? do_page_fault+0x19b/0x380
[391836.290116]  [<c01e83ed>] sys_write+0x3d/0x70
[391836.290120]  [<c010336c>] syscall_call+0x7/0xb
[391836.290122] ---[ end trace 9a0c1914c121040b ]---
[391836.290159] PM: Finishing wakeup.
[391836.290161] Restarting tasks ... 
[391836.291088] hub 1-0:1.0: over-current change on port 1
[391836.311846] done.
[391836.392016] hub 1-0:1.0: over-current change on port 2
[391836.496009] hub 1-0:1.0: over-current change on port 3
[391836.604055] hub 1-0:1.0: over-current change on port 4
[391836.712019] hub 1-0:1.0: over-current change on port 5
[391836.820017] hub 1-0:1.0: over-current change on port 6
[391836.924022] hub 1-0:1.0: over-current change on port 7
[391837.028709] usb 1-8: USB disconnect, address 4
[391837.560016] usb 1-8: new high speed USB device using ehci_hcd and address 5
[391837.697189] usb 1-8: configuration #1 chosen from 1 choice
[391837.697896] scsi5 : SCSI emulation for USB Mass Storage devices
[391837.697997] usb-storage: device found at 5
[391837.698000] usb-storage: waiting for device to settle before scanning
[391839.149994] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[391839.150014] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[391839.150085] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[391839.150096] [drm] Loading R200 Microcode
[391840.288658] skge eth0: enabling interface
[391840.292037] ADDRCONF(NETDEV_UP): eth0: link is not ready
[391842.324160] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[391842.324375] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[391842.696168] usb-storage: device scan complete
[391842.697026] scsi 5:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[391842.697444] sd 5:0:0:0: Attached scsi generic sg4 type 0
[391842.713541] sd 5:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[391842.714370] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[391842.714373] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[391842.715868] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[391842.715871] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[391842.715875]  sdc: sdc1
[391842.732747] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[391842.732751] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[391842.732756] sd 5:0:0:0: [sdc] Attached SCSI disk
[391852.408010] eth0: no IPv6 routers present
[395442.112021] usb 1-8: reset high speed USB device using ehci_hcd and address 5
[402642.112016] usb 1-8: reset high speed USB device using ehci_hcd and address 5
[409842.120032] usb 1-8: reset high speed USB device using ehci_hcd and address 5
[419617.651139] skge eth0: disabling interface
[419620.035670] PM: Syncing filesystems ... done.
[419620.041996] PM: Preparing system for mem sleep
[419620.042001] Freezing user space processes ... (elapsed 0.01 seconds) done.
[419620.053125] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[419620.053213] PM: Entering mem sleep
[419620.053225] Suspending console(s) (use no_console_suspend to debug)
[419620.100013] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[419620.100081] sd 0:0:1:0: [sdb] Stopping disk
[419620.218513] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[419620.223006] sd 0:0:0:0: [sda] Stopping disk
[419620.892401] serial 00:0a: disabled
[419620.892424] pci 0000:01:00.0: PCI INT A disabled
[419620.893007] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[419620.908010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[419620.908016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[419620.908021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[419620.908026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[419620.908031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[419620.908097] pata_via 0000:00:0f.1: PCI INT A disabled
[419620.908153] sata_via 0000:00:0f.0: PCI INT B disabled
[419620.924701] skge 0000:00:0a.0: PME# enabled
[419620.956020] PM: suspend devices took 0.904 seconds
[419620.956157] ehci_hcd 0000:00:10.4: PME# disabled
[419620.972030] uhci_hcd 0000:00:10.3: PME# disabled
[419620.988029] uhci_hcd 0000:00:10.2: PME# disabled
[419621.004030] uhci_hcd 0000:00:10.1: PME# disabled
[419621.020030] uhci_hcd 0000:00:10.0: PME# disabled
[419621.036237] ACPI: Preparing to enter system sleep state S3
[419621.036752] Disabling non-boot CPUs ...
[419621.036812] Extended CMOS year: 2000
[419621.036812] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[419621.036812] Back to C!
[419621.036812] Extended CMOS year: 2000
[419621.036812] ACPI: Waking up from system sleep state S3
[419621.036812] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[419621.036812] uhci_hcd 0000:00:10.0: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[419621.036812] uhci_hcd 0000:00:10.1: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[419621.036812] uhci_hcd 0000:00:10.2: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[419621.036812] uhci_hcd 0000:00:10.3: PME# disabled
[419621.036812] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[419621.036812] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[419621.036812] ehci_hcd 0000:00:10.4: PME# disabled
[419621.036812] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[419621.036812] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[419621.036812] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[419621.036812] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[419621.036812] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[419621.036812] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[419621.036812] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[419621.036812] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[419621.036812] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[419621.036812] pci 0000:00:01.0: setting latency timer to 64
[419621.036812] skge 0000:00:0a.0: PME# disabled
[419621.036812] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[419621.036812] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[419621.036812] uhci_hcd 0000:00:10.0: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[419621.036812] usb usb2: root hub lost power or was reset
[419621.036812] uhci_hcd 0000:00:10.1: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[419621.036812] usb usb3: root hub lost power or was reset
[419621.036812] uhci_hcd 0000:00:10.2: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[419621.036812] usb usb4: root hub lost power or was reset
[419621.036812] uhci_hcd 0000:00:10.3: PME# disabled
[419621.036812] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[419621.036812] usb usb5: root hub lost power or was reset
[419621.036812] ehci_hcd 0000:00:10.4: PME# disabled
[419621.036812] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[419621.036812] pci 0000:00:11.0: PME# disabled
[419621.036812] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[419621.036812] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[419621.046640] pci 0000:00:11.6: PME# disabled
[419621.046646] pci 0000:01:00.0: PME# disabled
[419621.046651] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[419621.046656] pci 0000:01:00.1: PME# disabled
[419621.047301] serial 00:0a: activated
[419621.207159] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[419621.218218] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[419621.218222] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[419621.232223] ata2.00: configured for UDMA/33
[419621.248264] ata2.01: configured for UDMA/33
[419621.792071] sd 0:0:0:0: [sda] Starting disk
[419626.088015] ata1: link is slow to respond, please be patient (ready=0)
[419627.876336] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[419627.876339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[419627.877866] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[419627.892336] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[419627.892339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[419627.893871] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[419627.917756] ata1.00: configured for UDMA/133
[419627.933776] ata1.01: configured for UDMA/133
[419627.965765] ata1.00: configured for UDMA/133
[419627.981771] ata1.01: configured for UDMA/133
[419627.981774] ata1: EH complete
[419628.003472] sd 0:0:1:0: [sdb] Starting disk
[419631.024003] 
[419631.024005] floppy driver state
[419631.024006] -------------------
[419631.024009] now=104832756 last interrupt=4294900853 diff=104899199 last called handler=f8096500
[419631.024011] timeout_message=lock fdc
[419631.024012] last output bytes:
[419631.024014] 12 90 4294892640
[419631.024016]  0 90 4294892640
[419631.024018] 14 90 4294892640
[419631.024019] 18 80 4294892641
[419631.024021]  8 80 4294892641
[419631.024023]  8 80 4294892641
[419631.024024]  8 80 4294892641
[419631.024026]  8 80 4294892641
[419631.024028] 12 80 4294900772
[419631.024029]  0 90 4294900772
[419631.024031] 13 90 4294900772
[419631.024033]  0 90 4294900772
[419631.024034] 1a 90 4294900772
[419631.024036]  0 90 4294900772
[419631.024038]  3 90 4294900772
[419631.024039] c1 90 4294900772
[419631.024041] 10 90 4294900772
[419631.024043]  7 80 4294900772
[419631.024044]  0 90 4294900772
[419631.024046]  8 81 4294900853
[419631.024047] last result at 4294900853
[419631.024049] last redo_fd_request at 97883861
[419631.024050] 70  0 
[419631.024061] status=19
[419631.024063] fdc_busy=1
[419631.024064] do_floppy=f8092770
[419631.024065] cont=f809b904
[419631.024067] current_req=(null)
[419631.024068] command_status=-1
[419631.024070] 
[419631.024073] floppy0: floppy timeout called
[419631.284007] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[419631.700006] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[419631.866935] usblp 3-2:1.0: no reset_resume for driver usblp?
[419631.867009] usblp0: removed
[419631.869974] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[419631.870046] PM: resume devices took 10.832 seconds
[419631.870048] ------------[ cut here ]------------
[419631.870056] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[419631.870058] Hardware name: System Product Name
[419631.870060] Component: resume devices, time: 10832
[419631.870062] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[419631.870092] Pid: 28262, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[419631.870094] Call Trace:
[419631.870101]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[419631.870105]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[419631.870109]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[419631.870113]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[419631.870117]  [<c0174e34>] suspend_test_finish+0x84/0x90
[419631.870120]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[419631.870124]  [<c056e92c>] ? printk+0x18/0x1c
[419631.870128]  [<c0174d09>] enter_state+0xb9/0xf0
[419631.870131]  [<c01743fd>] state_store+0x6d/0xb0
[419631.870135]  [<c0174390>] ? state_store+0x0/0xb0
[419631.870139]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[419631.870144]  [<c0239790>] sysfs_write_file+0x90/0x100
[419631.870149]  [<c01e792a>] vfs_write+0x9a/0x190
[419631.870152]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[419631.870157]  [<c057325b>] ? do_page_fault+0x19b/0x380
[419631.870160]  [<c01e83ed>] sys_write+0x3d/0x70
[419631.870163]  [<c010336c>] syscall_call+0x7/0xb
[419631.870166] ---[ end trace 9a0c1914c121040c ]---
[419631.870203] PM: Finishing wakeup.
[419631.870204] Restarting tasks ... 
[419631.871165] hub 1-0:1.0: over-current change on port 1
[419631.892932] done.
[419631.976044] hub 1-0:1.0: over-current change on port 2
[419632.084047] hub 1-0:1.0: over-current change on port 3
[419632.188023] hub 1-0:1.0: over-current change on port 4
[419632.296018] hub 1-0:1.0: over-current change on port 5
[419632.400007] hub 1-0:1.0: over-current change on port 6
[419632.508010] hub 1-0:1.0: over-current change on port 7
[419632.616024] usb 1-8: USB disconnect, address 5
[419633.986197] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[419633.986217] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[419633.986284] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[419633.986295] [drm] Loading R200 Microcode
[419634.172465] skge eth0: enabling interface
[419634.175817] ADDRCONF(NETDEV_UP): eth0: link is not ready
[419636.079506] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[419636.079724] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[419646.976007] eth0: no IPv6 routers present
[453330.849670] skge eth0: disabling interface
[453333.052180] PM: Syncing filesystems ... done.
[453333.059389] PM: Preparing system for mem sleep
[453333.059393] Freezing user space processes ... (elapsed 0.00 seconds) done.
[453333.061449] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[453333.061540] PM: Entering mem sleep
[453333.061555] Suspending console(s) (use no_console_suspend to debug)
[453333.092016] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[453333.092105] sd 0:0:1:0: [sdb] Stopping disk
[453333.217255] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[453333.342627] sd 0:0:0:0: [sda] Stopping disk
[453333.980385] serial 00:0a: disabled
[453333.980408] pci 0000:01:00.0: PCI INT A disabled
[453333.980991] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[453333.996011] ehci_hcd 0000:00:10.4: PCI INT C disabled
[453333.996016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[453333.996021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[453333.996026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[453333.996031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[453333.996104] pata_via 0000:00:0f.1: PCI INT A disabled
[453333.996158] sata_via 0000:00:0f.0: PCI INT B disabled
[453334.012699] skge 0000:00:0a.0: PME# enabled
[453334.044021] PM: suspend devices took 0.984 seconds
[453334.044149] ehci_hcd 0000:00:10.4: PME# disabled
[453334.060027] uhci_hcd 0000:00:10.3: PME# disabled
[453334.076027] uhci_hcd 0000:00:10.2: PME# disabled
[453334.092027] uhci_hcd 0000:00:10.1: PME# disabled
[453334.108027] uhci_hcd 0000:00:10.0: PME# disabled
[453334.124225] ACPI: Preparing to enter system sleep state S3
[453334.124746] Disabling non-boot CPUs ...
[453334.124807] Extended CMOS year: 2000
[453334.124807] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[453334.124807] Back to C!
[453334.124807] Extended CMOS year: 2000
[453334.124807] ACPI: Waking up from system sleep state S3
[453334.124807] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[453334.124807] uhci_hcd 0000:00:10.0: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[453334.124807] uhci_hcd 0000:00:10.1: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[453334.124807] uhci_hcd 0000:00:10.2: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[453334.124807] uhci_hcd 0000:00:10.3: PME# disabled
[453334.124807] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[453334.124807] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[453334.124807] ehci_hcd 0000:00:10.4: PME# disabled
[453334.124807] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[453334.124807] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[453334.124807] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[453334.124807] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[453334.124807] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[453334.124807] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[453334.124807] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[453334.124807] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[453334.124807] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[453334.124807] pci 0000:00:01.0: setting latency timer to 64
[453334.124807] skge 0000:00:0a.0: PME# disabled
[453334.124807] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[453334.124807] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[453334.124807] uhci_hcd 0000:00:10.0: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[453334.124807] usb usb2: root hub lost power or was reset
[453334.124807] uhci_hcd 0000:00:10.1: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[453334.124807] usb usb3: root hub lost power or was reset
[453334.124807] uhci_hcd 0000:00:10.2: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[453334.124807] usb usb4: root hub lost power or was reset
[453334.124807] uhci_hcd 0000:00:10.3: PME# disabled
[453334.124807] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[453334.124807] usb usb5: root hub lost power or was reset
[453334.124807] ehci_hcd 0000:00:10.4: PME# disabled
[453334.124807] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[453334.124807] pci 0000:00:11.0: PME# disabled
[453334.124807] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[453334.124807] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[453334.134290] pci 0000:00:11.6: PME# disabled
[453334.134295] pci 0000:01:00.0: PME# disabled
[453334.134300] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[453334.134306] pci 0000:01:00.1: PME# disabled
[453334.134951] serial 00:0a: activated
[453334.295160] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[453334.306219] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[453334.306223] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[453334.320223] ata2.00: configured for UDMA/33
[453334.336264] ata2.01: configured for UDMA/33
[453334.680074] sd 0:0:0:0: [sda] Starting disk
[453339.176006] ata1: link is slow to respond, please be patient (ready=0)
[453341.188335] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[453341.188339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[453341.189866] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[453341.204336] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[453341.204339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[453341.205887] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[453341.229779] ata1.00: configured for UDMA/133
[453341.245766] ata1.01: configured for UDMA/133
[453341.277787] ata1.00: configured for UDMA/133
[453341.293773] ata1.01: configured for UDMA/133
[453341.293775] ata1: EH complete
[453341.312635] sd 0:0:1:0: [sdb] Starting disk
[453344.332003] 
[453344.332004] floppy driver state
[453344.332006] -------------------
[453344.332009] now=113261083 last interrupt=4294900853 diff=113327526 last called handler=f8096500
[453344.332011] timeout_message=lock fdc
[453344.332012] last output bytes:
[453344.332014] 12 90 4294892640
[453344.332016]  0 90 4294892640
[453344.332018] 14 90 4294892640
[453344.332019] 18 80 4294892641
[453344.332021]  8 80 4294892641
[453344.332023]  8 80 4294892641
[453344.332024]  8 80 4294892641
[453344.332026]  8 80 4294892641
[453344.332028] 12 80 4294900772
[453344.332029]  0 90 4294900772
[453344.332031] 13 90 4294900772
[453344.332033]  0 90 4294900772
[453344.332034] 1a 90 4294900772
[453344.332036]  0 90 4294900772
[453344.332038]  3 90 4294900772
[453344.332039] c1 90 4294900772
[453344.332041] 10 90 4294900772
[453344.332043]  7 80 4294900772
[453344.332044]  0 90 4294900772
[453344.332046]  8 81 4294900853
[453344.332047] last result at 4294900853
[453344.332049] last redo_fd_request at 104832756
[453344.332050] 70  0 
[453344.332061] status=19
[453344.332063] fdc_busy=1
[453344.332064] do_floppy=f8092770
[453344.332065] cont=f809b904
[453344.332067] current_req=(null)
[453344.332068] command_status=-1
[453344.332070] 
[453344.332073] floppy0: floppy timeout called
[453344.592007] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[453345.008006] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[453345.174850] usblp 3-2:1.0: no reset_resume for driver usblp?
[453345.174923] usblp0: removed
[453345.177890] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[453345.177962] PM: resume devices took 11.052 seconds
[453345.177964] ------------[ cut here ]------------
[453345.177973] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[453345.177975] Hardware name: System Product Name
[453345.177977] Component: resume devices, time: 11052
[453345.177979] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[453345.178009] Pid: 29794, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[453345.178011] Call Trace:
[453345.178018]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[453345.178022]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[453345.178025]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[453345.178029]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[453345.178033]  [<c0174e34>] suspend_test_finish+0x84/0x90
[453345.178037]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[453345.178041]  [<c056e92c>] ? printk+0x18/0x1c
[453345.178044]  [<c0174d09>] enter_state+0xb9/0xf0
[453345.178048]  [<c01743fd>] state_store+0x6d/0xb0
[453345.178051]  [<c0174390>] ? state_store+0x0/0xb0
[453345.178056]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[453345.178061]  [<c0239790>] sysfs_write_file+0x90/0x100
[453345.178065]  [<c01e792a>] vfs_write+0x9a/0x190
[453345.178069]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[453345.178073]  [<c057325b>] ? do_page_fault+0x19b/0x380
[453345.178077]  [<c01e83ed>] sys_write+0x3d/0x70
[453345.178080]  [<c010336c>] syscall_call+0x7/0xb
[453345.178083] ---[ end trace 9a0c1914c121040d ]---
[453345.178119] PM: Finishing wakeup.
[453345.178121] Restarting tasks ... done.
[453347.122716] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[453347.122735] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[453347.122805] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[453347.122816] [drm] Loading R200 Microcode
[453347.173007] skge eth0: enabling interface
[453347.176353] ADDRCONF(NETDEV_UP): eth0: link is not ready
[453349.208489] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[453349.208715] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[453360.192010] eth0: no IPv6 routers present
[459879.436055] usb 1-8: new high speed USB device using ehci_hcd and address 6
[459879.569162] usb 1-8: configuration #1 chosen from 1 choice
[459879.569920] scsi6 : SCSI emulation for USB Mass Storage devices
[459879.570026] usb-storage: device found at 6
[459879.570028] usb-storage: waiting for device to settle before scanning
[459884.568151] usb-storage: device scan complete
[459884.569004] scsi 6:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[459884.569423] sd 6:0:0:0: Attached scsi generic sg4 type 0
[459884.586220] sd 6:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[459884.589120] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
[459884.589127] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[459884.590723] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
[459884.590726] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[459884.590730]  sdc: sdc1
[459884.606850] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
[459884.606855] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[459884.606859] sd 6:0:0:0: [sdc] Attached SCSI disk
[462351.112016] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[465951.112022] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[469551.112021] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[473151.112018] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[476751.121184] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[480351.112022] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[483951.112021] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[487551.120023] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[491151.112019] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[494751.112015] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[498351.112020] usb 1-8: reset high speed USB device using ehci_hcd and address 6
[498956.866973] skge eth0: disabling interface
[498959.589766] PM: Syncing filesystems ... done.
[498959.592287] PM: Preparing system for mem sleep
[498959.592291] Freezing user space processes ... (elapsed 0.00 seconds) done.
[498959.594380] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[498959.594473] PM: Entering mem sleep
[498959.594488] Suspending console(s) (use no_console_suspend to debug)
[498959.640014] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[498959.640105] sd 0:0:1:0: [sdb] Stopping disk
[498959.762304] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[498959.762363] sd 0:0:0:0: [sda] Stopping disk
[498960.432428] serial 00:0a: disabled
[498960.432451] pci 0000:01:00.0: PCI INT A disabled
[498960.433045] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[498960.448010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[498960.448016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[498960.448021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[498960.448026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[498960.448031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[498960.448107] pata_via 0000:00:0f.1: PCI INT A disabled
[498960.448163] sata_via 0000:00:0f.0: PCI INT B disabled
[498960.464703] skge 0000:00:0a.0: PME# enabled
[498960.496021] PM: suspend devices took 0.904 seconds
[498960.496159] ehci_hcd 0000:00:10.4: PME# disabled
[498960.512030] uhci_hcd 0000:00:10.3: PME# disabled
[498960.528030] uhci_hcd 0000:00:10.2: PME# disabled
[498960.544031] uhci_hcd 0000:00:10.1: PME# disabled
[498960.560030] uhci_hcd 0000:00:10.0: PME# disabled
[498960.576235] ACPI: Preparing to enter system sleep state S3
[498960.576767] Disabling non-boot CPUs ...
[498960.576828] Extended CMOS year: 2000
[498960.576828] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[498960.576828] Back to C!
[498960.576828] Extended CMOS year: 2000
[498960.576828] ACPI: Waking up from system sleep state S3
[498960.576828] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[498960.576828] uhci_hcd 0000:00:10.0: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[498960.576828] uhci_hcd 0000:00:10.1: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[498960.576828] uhci_hcd 0000:00:10.2: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[498960.576828] uhci_hcd 0000:00:10.3: PME# disabled
[498960.576828] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[498960.576828] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[498960.576828] ehci_hcd 0000:00:10.4: PME# disabled
[498960.576828] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[498960.576828] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[498960.576828] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[498960.576828] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[498960.576828] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[498960.576828] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[498960.576828] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[498960.576828] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[498960.576828] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[498960.576828] pci 0000:00:01.0: setting latency timer to 64
[498960.576828] skge 0000:00:0a.0: PME# disabled
[498960.576828] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[498960.576828] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[498960.576828] uhci_hcd 0000:00:10.0: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[498960.576828] usb usb2: root hub lost power or was reset
[498960.576828] uhci_hcd 0000:00:10.1: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[498960.576828] usb usb3: root hub lost power or was reset
[498960.576828] uhci_hcd 0000:00:10.2: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[498960.576828] usb usb4: root hub lost power or was reset
[498960.576828] uhci_hcd 0000:00:10.3: PME# disabled
[498960.576828] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[498960.576828] usb usb5: root hub lost power or was reset
[498960.576828] ehci_hcd 0000:00:10.4: PME# disabled
[498960.576828] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[498960.576828] pci 0000:00:11.0: PME# disabled
[498960.576828] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[498960.576828] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[498960.587151] pci 0000:00:11.6: PME# disabled
[498960.587156] pci 0000:01:00.0: PME# disabled
[498960.587161] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[498960.587167] pci 0000:01:00.1: PME# disabled
[498960.587869] serial 00:0a: activated
[498960.747161] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[498960.758222] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[498960.758225] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[498960.772223] ata2.00: configured for UDMA/33
[498960.788264] ata2.01: configured for UDMA/33
[498961.332073] sd 0:0:0:0: [sda] Starting disk
[498965.628007] ata1: link is slow to respond, please be patient (ready=0)
[498967.472337] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[498967.472340] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[498967.473885] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[498967.488345] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[498967.488348] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[498967.489866] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[498967.513751] ata1.00: configured for UDMA/133
[498967.529762] ata1.01: configured for UDMA/133
[498967.561768] ata1.00: configured for UDMA/133
[498967.577757] ata1.01: configured for UDMA/133
[498967.577760] ata1: EH complete
[498967.595651] sd 0:0:1:0: [sdb] Starting disk
[498970.616003] 
[498970.616005] floppy driver state
[498970.616006] -------------------
[498970.616009] now=124667654 last interrupt=4294900853 diff=124734097 last called handler=f8096500
[498970.616011] timeout_message=lock fdc
[498970.616012] last output bytes:
[498970.616014] 12 90 4294892640
[498970.616016]  0 90 4294892640
[498970.616018] 14 90 4294892640
[498970.616020] 18 80 4294892641
[498970.616021]  8 80 4294892641
[498970.616023]  8 80 4294892641
[498970.616025]  8 80 4294892641
[498970.616026]  8 80 4294892641
[498970.616028] 12 80 4294900772
[498970.616030]  0 90 4294900772
[498970.616031] 13 90 4294900772
[498970.616033]  0 90 4294900772
[498970.616035] 1a 90 4294900772
[498970.616036]  0 90 4294900772
[498970.616038]  3 90 4294900772
[498970.616040] c1 90 4294900772
[498970.616041] 10 90 4294900772
[498970.616043]  7 80 4294900772
[498970.616044]  0 90 4294900772
[498970.616046]  8 81 4294900853
[498970.616048] last result at 4294900853
[498970.616049] last redo_fd_request at 113261083
[498970.616051] 70  0 
[498970.616061] status=19
[498970.616063] fdc_busy=1
[498970.616064] do_floppy=f8092770
[498970.616066] cont=f809b904
[498970.616067] current_req=(null)
[498970.616069] command_status=-1
[498970.616070] 
[498970.616073] floppy0: floppy timeout called
[498970.876008] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[498971.292006] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[498971.457924] usblp 3-2:1.0: no reset_resume for driver usblp?
[498971.457996] usblp0: removed
[498971.460964] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[498971.461039] PM: resume devices took 10.884 seconds
[498971.461041] ------------[ cut here ]------------
[498971.461049] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[498971.461052] Hardware name: System Product Name
[498971.461054] Component: resume devices, time: 10884
[498971.461055] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[498971.461085] Pid: 31737, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[498971.461087] Call Trace:
[498971.461094]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[498971.461098]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[498971.461102]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[498971.461106]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[498971.461109]  [<c0174e34>] suspend_test_finish+0x84/0x90
[498971.461113]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[498971.461117]  [<c056e92c>] ? printk+0x18/0x1c
[498971.461121]  [<c0174d09>] enter_state+0xb9/0xf0
[498971.461124]  [<c01743fd>] state_store+0x6d/0xb0
[498971.461128]  [<c0174390>] ? state_store+0x0/0xb0
[498971.461133]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[498971.461137]  [<c0239790>] sysfs_write_file+0x90/0x100
[498971.461142]  [<c01e792a>] vfs_write+0x9a/0x190
[498971.461145]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[498971.461150]  [<c057325b>] ? do_page_fault+0x19b/0x380
[498971.461153]  [<c01e83ed>] sys_write+0x3d/0x70
[498971.461157]  [<c010336c>] syscall_call+0x7/0xb
[498971.461159] ---[ end trace 9a0c1914c121040e ]---
[498971.461196] PM: Finishing wakeup.
[498971.461198] Restarting tasks ... 
[498971.462121] hub 1-0:1.0: over-current change on port 1
[498971.495852] done.
[498971.564020] hub 1-0:1.0: over-current change on port 2
[498971.668018] hub 1-0:1.0: over-current change on port 3
[498971.772023] hub 1-0:1.0: over-current change on port 4
[498971.880019] hub 1-0:1.0: over-current change on port 5
[498971.984008] hub 1-0:1.0: over-current change on port 6
[498972.088024] hub 1-0:1.0: over-current change on port 7
[498972.192031] usb 1-8: USB disconnect, address 6
[498973.721721] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[498973.721741] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[498973.721811] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[498973.721822] [drm] Loading R200 Microcode
[498974.407102] skge eth0: enabling interface
[498974.410461] ADDRCONF(NETDEV_UP): eth0: link is not ready
[498976.332417] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[498976.332635] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[498986.692006] eth0: no IPv6 routers present
[508538.049271] usblp0: removed
[510360.360043] usb 3-2: USB disconnect, address 2
[510367.952092] usb 3-2: new full speed USB device using uhci_hcd and address 3
[510368.162378] usb 3-2: configuration #1 chosen from 1 choice
[510368.169187] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[510369.499388] usb 3-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[539009.268329] skge eth0: disabling interface
[539011.570123] PM: Syncing filesystems ... done.
[539011.572642] PM: Preparing system for mem sleep
[539011.572645] Freezing user space processes ... (elapsed 0.00 seconds) done.
[539011.574710] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[539011.574802] PM: Entering mem sleep
[539011.574816] Suspending console(s) (use no_console_suspend to debug)
[539011.604016] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[539011.604104] sd 0:0:1:0: [sdb] Stopping disk
[539011.721883] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[539011.817245] sd 0:0:0:0: [sda] Stopping disk
[539012.452387] serial 00:0a: disabled
[539012.452410] pci 0000:01:00.0: PCI INT A disabled
[539012.452996] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[539012.468010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[539012.468016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[539012.468021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[539012.468026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[539012.468031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[539012.468104] pata_via 0000:00:0f.1: PCI INT A disabled
[539012.468158] sata_via 0000:00:0f.0: PCI INT B disabled
[539012.484698] skge 0000:00:0a.0: PME# enabled
[539012.516021] PM: suspend devices took 0.944 seconds
[539012.516149] ehci_hcd 0000:00:10.4: PME# disabled
[539012.532028] uhci_hcd 0000:00:10.3: PME# disabled
[539012.548027] uhci_hcd 0000:00:10.2: PME# disabled
[539012.564027] uhci_hcd 0000:00:10.1: PME# disabled
[539012.580026] uhci_hcd 0000:00:10.0: PME# disabled
[539012.596224] ACPI: Preparing to enter system sleep state S3
[539012.596740] Disabling non-boot CPUs ...
[539012.596800] Extended CMOS year: 2000
[539012.596800] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[539012.596800] Back to C!
[539012.596800] Extended CMOS year: 2000
[539012.596800] ACPI: Waking up from system sleep state S3
[539012.596800] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[539012.596800] uhci_hcd 0000:00:10.0: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[539012.596800] uhci_hcd 0000:00:10.1: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[539012.596800] uhci_hcd 0000:00:10.2: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[539012.596800] uhci_hcd 0000:00:10.3: PME# disabled
[539012.596800] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[539012.596800] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[539012.596800] ehci_hcd 0000:00:10.4: PME# disabled
[539012.596800] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[539012.596800] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[539012.596800] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[539012.596800] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[539012.596800] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[539012.596800] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[539012.596800] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[539012.596800] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[539012.596800] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[539012.596800] pci 0000:00:01.0: setting latency timer to 64
[539012.596800] skge 0000:00:0a.0: PME# disabled
[539012.596800] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[539012.596800] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[539012.596800] uhci_hcd 0000:00:10.0: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[539012.596800] usb usb2: root hub lost power or was reset
[539012.596800] uhci_hcd 0000:00:10.1: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[539012.596800] usb usb3: root hub lost power or was reset
[539012.596800] uhci_hcd 0000:00:10.2: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[539012.596800] usb usb4: root hub lost power or was reset
[539012.596800] uhci_hcd 0000:00:10.3: PME# disabled
[539012.596800] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[539012.596800] usb usb5: root hub lost power or was reset
[539012.596800] ehci_hcd 0000:00:10.4: PME# disabled
[539012.596800] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[539012.596800] pci 0000:00:11.0: PME# disabled
[539012.596800] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[539012.596800] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[539012.606184] pci 0000:00:11.6: PME# disabled
[539012.606189] pci 0000:01:00.0: PME# disabled
[539012.606194] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[539012.606200] pci 0000:01:00.1: PME# disabled
[539012.606854] serial 00:0a: activated
[539012.767205] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[539012.778264] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[539012.778267] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[539012.792226] ata2.00: configured for UDMA/33
[539012.808264] ata2.01: configured for UDMA/33
[539013.152071] sd 0:0:0:0: [sda] Starting disk
[539017.648006] ata1: link is slow to respond, please be patient (ready=0)
[539019.492336] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[539019.492339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[539019.493876] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[539019.508335] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[539019.508339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[539019.509863] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[539019.533771] ata1.00: configured for UDMA/133
[539019.549752] ata1.01: configured for UDMA/133
[539019.581758] ata1.00: configured for UDMA/133
[539019.597749] ata1.01: configured for UDMA/133
[539019.597751] ata1: EH complete
[539019.616334] sd 0:0:1:0: [sdb] Starting disk
[539022.632002] 
[539022.632004] floppy driver state
[539022.632005] -------------------
[539022.632008] now=134680658 last interrupt=4294900853 diff=134747101 last called handler=f8096500
[539022.632010] timeout_message=lock fdc
[539022.632012] last output bytes:
[539022.632014] 12 90 4294892640
[539022.632015]  0 90 4294892640
[539022.632017] 14 90 4294892640
[539022.632019] 18 80 4294892641
[539022.632021]  8 80 4294892641
[539022.632022]  8 80 4294892641
[539022.632024]  8 80 4294892641
[539022.632026]  8 80 4294892641
[539022.632027] 12 80 4294900772
[539022.632029]  0 90 4294900772
[539022.632031] 13 90 4294900772
[539022.632032]  0 90 4294900772
[539022.632034] 1a 90 4294900772
[539022.632035]  0 90 4294900772
[539022.632037]  3 90 4294900772
[539022.632039] c1 90 4294900772
[539022.632040] 10 90 4294900772
[539022.632042]  7 80 4294900772
[539022.632044]  0 90 4294900772
[539022.632045]  8 81 4294900853
[539022.632047] last result at 4294900853
[539022.632048] last redo_fd_request at 124667654
[539022.632050] 70  0 
[539022.632061] status=19
[539022.632062] fdc_busy=1
[539022.632063] do_floppy=f8092770
[539022.632065] cont=f809b904
[539022.632067] current_req=(null)
[539022.632068] command_status=-1
[539022.632069] 
[539022.632073] floppy0: floppy timeout called
[539022.892007] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[539023.308007] usb 3-2: reset full speed USB device using uhci_hcd and address 3
[539023.474885] usblp 3-2:1.0: no reset_resume for driver usblp?
[539023.474966] usblp0: removed
[539023.477924] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[539023.478001] PM: resume devices took 10.880 seconds
[539023.478003] ------------[ cut here ]------------
[539023.478011] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[539023.478014] Hardware name: System Product Name
[539023.478016] Component: resume devices, time: 10880
[539023.478018] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[539023.478048] Pid: 1536, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[539023.478050] Call Trace:
[539023.478057]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[539023.478061]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[539023.478065]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[539023.478069]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[539023.478072]  [<c0174e34>] suspend_test_finish+0x84/0x90
[539023.478076]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[539023.478080]  [<c056e92c>] ? printk+0x18/0x1c
[539023.478084]  [<c0174d09>] enter_state+0xb9/0xf0
[539023.478087]  [<c01743fd>] state_store+0x6d/0xb0
[539023.478090]  [<c0174390>] ? state_store+0x0/0xb0
[539023.478095]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[539023.478100]  [<c0239790>] sysfs_write_file+0x90/0x100
[539023.478105]  [<c01e792a>] vfs_write+0x9a/0x190
[539023.478108]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[539023.478113]  [<c057325b>] ? do_page_fault+0x19b/0x380
[539023.478116]  [<c01e83ed>] sys_write+0x3d/0x70
[539023.478120]  [<c010336c>] syscall_call+0x7/0xb
[539023.478122] ---[ end trace 9a0c1914c121040f ]---
[539023.478159] PM: Finishing wakeup.
[539023.478160] Restarting tasks ... done.
[539025.668206] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[539025.668227] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[539025.668299] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[539025.668310] [drm] Loading R200 Microcode
[539026.799132] skge eth0: enabling interface
[539026.802490] ADDRCONF(NETDEV_UP): eth0: link is not ready
[539028.724450] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[539028.724667] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[539039.280007] eth0: no IPv6 routers present
[539778.608024] usb 1-8: new high speed USB device using ehci_hcd and address 7
[539778.741124] usb 1-8: configuration #1 chosen from 1 choice
[539778.741991] scsi7 : SCSI emulation for USB Mass Storage devices
[539778.742095] usb-storage: device found at 7
[539778.742097] usb-storage: waiting for device to settle before scanning
[539783.740229] usb-storage: device scan complete
[539783.741085] scsi 7:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[539783.741491] sd 7:0:0:0: Attached scsi generic sg4 type 0
[539783.758959] sd 7:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[539783.759811] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled
[539783.759814] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[539783.761340] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled
[539783.761343] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[539783.761346]  sdc: sdc1
[539783.778858] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled
[539783.778864] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[539783.778869] sd 7:0:0:0: [sdc] Attached SCSI disk
[540021.514133] type=1503 audit(1289506293.937:19): operation="open" pid=2536 parent=2533 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/Elements/SteveBackup/home/steve/Documents/0212049"
[540021.526769] type=1503 audit(1289506293.949:20): operation="open" pid=2536 parent=2533 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/Elements/SteveBackup/home/steve/Documents/0212049"
[541168.393380] udev: starting version 151
[542628.112023] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[546228.112022] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[549828.112031] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[553428.112027] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[557028.112022] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[560628.112018] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[564228.112018] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[567828.112015] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[571428.112020] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[575028.112064] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[578628.112017] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[582228.112025] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[585828.112016] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[589428.112016] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[593028.112028] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[596628.112026] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[600228.112025] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[603828.112019] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[607428.112020] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[612388.178797] skge eth0: Link is down.
[612389.915392] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[612393.947966] skge eth0: Link is down.
[612395.746618] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[616428.116027] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[620028.112026] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[623628.112023] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[627228.112026] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[630828.112042] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[634428.120028] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[638028.116030] usb 1-8: reset high speed USB device using ehci_hcd and address 7
[638214.616773] skge eth0: disabling interface
[638218.041936] PM: Syncing filesystems ... done.
[638218.043546] PM: Preparing system for mem sleep
[638218.043549] Freezing user space processes ... (elapsed 0.26 seconds) done.
[638218.305481] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[638218.305572] PM: Entering mem sleep
[638218.305586] Suspending console(s) (use no_console_suspend to debug)
[638218.352013] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[638218.352081] sd 0:0:1:0: [sdb] Stopping disk
[638218.473279] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[638218.473338] sd 0:0:0:0: [sda] Stopping disk
[638219.140404] serial 00:0a: disabled
[638219.140427] pci 0000:01:00.0: PCI INT A disabled
[638219.141010] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[638219.156010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[638219.156016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[638219.156021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[638219.156026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[638219.156031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[638219.156105] pata_via 0000:00:0f.1: PCI INT A disabled
[638219.156161] sata_via 0000:00:0f.0: PCI INT B disabled
[638219.172702] skge 0000:00:0a.0: PME# enabled
[638219.204020] PM: suspend devices took 0.900 seconds
[638219.204157] ehci_hcd 0000:00:10.4: PME# disabled
[638219.220030] uhci_hcd 0000:00:10.3: PME# disabled
[638219.236030] uhci_hcd 0000:00:10.2: PME# disabled
[638219.252030] uhci_hcd 0000:00:10.1: PME# disabled
[638219.268030] uhci_hcd 0000:00:10.0: PME# disabled
[638219.284235] ACPI: Preparing to enter system sleep state S3
[638219.284748] Disabling non-boot CPUs ...
[638219.284808] Extended CMOS year: 2000
[638219.284808] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[638219.284808] Back to C!
[638219.284808] Extended CMOS year: 2000
[638219.284808] ACPI: Waking up from system sleep state S3
[638219.284808] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[638219.284808] uhci_hcd 0000:00:10.0: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[638219.284808] uhci_hcd 0000:00:10.1: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[638219.284808] uhci_hcd 0000:00:10.2: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[638219.284808] uhci_hcd 0000:00:10.3: PME# disabled
[638219.284808] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[638219.284808] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[638219.284808] ehci_hcd 0000:00:10.4: PME# disabled
[638219.284808] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[638219.284808] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[638219.284808] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[638219.284808] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[638219.284808] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[638219.284808] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[638219.284808] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[638219.284808] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[638219.284808] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[638219.284808] pci 0000:00:01.0: setting latency timer to 64
[638219.284808] skge 0000:00:0a.0: PME# disabled
[638219.284808] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[638219.284808] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[638219.284808] uhci_hcd 0000:00:10.0: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[638219.284808] usb usb2: root hub lost power or was reset
[638219.284808] uhci_hcd 0000:00:10.1: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[638219.284808] usb usb3: root hub lost power or was reset
[638219.284808] uhci_hcd 0000:00:10.2: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[638219.284808] usb usb4: root hub lost power or was reset
[638219.284808] uhci_hcd 0000:00:10.3: PME# disabled
[638219.284808] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[638219.284808] usb usb5: root hub lost power or was reset
[638219.284808] ehci_hcd 0000:00:10.4: PME# disabled
[638219.284808] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[638219.284808] pci 0000:00:11.0: PME# disabled
[638219.284808] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[638219.284808] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[638219.294724] pci 0000:00:11.6: PME# disabled
[638219.294730] pci 0000:01:00.0: PME# disabled
[638219.294735] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[638219.294740] pci 0000:01:00.1: PME# disabled
[638219.295420] serial 00:0a: activated
[638219.455161] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[638219.466222] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[638219.466225] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[638219.480223] ata2.00: configured for UDMA/33
[638219.496264] ata2.01: configured for UDMA/33
[638219.960073] sd 0:0:0:0: [sda] Starting disk
[638224.336006] ata1: link is slow to respond, please be patient (ready=0)
[638226.124336] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[638226.124339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[638226.125862] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[638226.140336] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[638226.140340] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[638226.141885] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[638226.165767] ata1.00: configured for UDMA/133
[638226.181777] ata1.01: configured for UDMA/133
[638226.214901] ata1.00: configured for UDMA/133
[638226.229779] ata1.01: configured for UDMA/133
[638226.229782] ata1: EH complete
[638226.255040] sd 0:0:1:0: [sdb] Starting disk
[638229.280003] 
[638229.280004] floppy driver state
[638229.280005] -------------------
[638229.280009] now=159482320 last interrupt=4294900853 diff=159548763 last called handler=f8096500
[638229.280011] timeout_message=lock fdc
[638229.280012] last output bytes:
[638229.280014] 12 90 4294892640
[638229.280016]  0 90 4294892640
[638229.280018] 14 90 4294892640
[638229.280019] 18 80 4294892641
[638229.280021]  8 80 4294892641
[638229.280023]  8 80 4294892641
[638229.280025]  8 80 4294892641
[638229.280026]  8 80 4294892641
[638229.280028] 12 80 4294900772
[638229.280030]  0 90 4294900772
[638229.280031] 13 90 4294900772
[638229.280033]  0 90 4294900772
[638229.280035] 1a 90 4294900772
[638229.280037]  0 90 4294900772
[638229.280038]  3 90 4294900772
[638229.280040] c1 90 4294900772
[638229.280042] 10 90 4294900772
[638229.280043]  7 80 4294900772
[638229.280045]  0 90 4294900772
[638229.280047]  8 81 4294900853
[638229.280048] last result at 4294900853
[638229.280050] last redo_fd_request at 134680658
[638229.280051] 70  0 
[638229.280062] status=19
[638229.280064] fdc_busy=1
[638229.280065] do_floppy=f8092770
[638229.280066] cont=f809b904
[638229.280068] current_req=(null)
[638229.280070] command_status=-1
[638229.280071] 
[638229.280074] floppy0: floppy timeout called
[638229.540007] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[638229.956007] usb 3-2: reset full speed USB device using uhci_hcd and address 3
[638230.122921] usblp 3-2:1.0: no reset_resume for driver usblp?
[638230.122994] usblp0: removed
[638230.125963] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[638230.126042] PM: resume devices took 10.840 seconds
[638230.126044] ------------[ cut here ]------------
[638230.126053] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[638230.126056] Hardware name: System Product Name
[638230.126058] Component: resume devices, time: 10840
[638230.126059] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[638230.126089] Pid: 10852, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[638230.126092] Call Trace:
[638230.126099]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[638230.126103]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[638230.126107]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[638230.126111]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[638230.126115]  [<c0174e34>] suspend_test_finish+0x84/0x90
[638230.126119]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[638230.126123]  [<c056e92c>] ? printk+0x18/0x1c
[638230.126126]  [<c0174d09>] enter_state+0xb9/0xf0
[638230.126130]  [<c01743fd>] state_store+0x6d/0xb0
[638230.126133]  [<c0174390>] ? state_store+0x0/0xb0
[638230.126138]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[638230.126143]  [<c0239790>] sysfs_write_file+0x90/0x100
[638230.126148]  [<c01e792a>] vfs_write+0x9a/0x190
[638230.126152]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[638230.126156]  [<c057325b>] ? do_page_fault+0x19b/0x380
[638230.126160]  [<c01e83ed>] sys_write+0x3d/0x70
[638230.126163]  [<c010336c>] syscall_call+0x7/0xb
[638230.126166] ---[ end trace 9a0c1914c1210410 ]---
[638230.126203] PM: Finishing wakeup.
[638230.126205] Restarting tasks ... done.
[638230.127791] usb 1-8: USB disconnect, address 7
[638231.556047] usb 1-8: new high speed USB device using ehci_hcd and address 8
[638231.755483] usb 1-8: configuration #1 chosen from 1 choice
[638231.756448] scsi8 : SCSI emulation for USB Mass Storage devices
[638231.756592] usb-storage: device found at 8
[638231.756594] usb-storage: waiting for device to settle before scanning
[638232.714055] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[638232.714074] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[638232.714145] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[638232.714156] [drm] Loading R200 Microcode
[638233.830374] skge eth0: enabling interface
[638233.833732] ADDRCONF(NETDEV_UP): eth0: link is not ready
[638235.726615] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[638235.726831] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[638236.756203] usb-storage: device scan complete
[638236.757061] scsi 8:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[638236.757474] sd 8:0:0:0: Attached scsi generic sg4 type 0
[638236.779438] sd 8:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[638236.780288] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
[638236.780292] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[638236.794557] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
[638236.794563] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[638236.794569]  sdc: sdc1
[638236.809035] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
[638236.809040] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[638236.809044] sd 8:0:0:0: [sdc] Attached SCSI disk
[638245.872008] eth0: no IPv6 routers present
[652634.112023] usb 1-8: reset high speed USB device using ehci_hcd and address 8
[676725.346422] skge eth0: disabling interface
[676728.544013] PM: Syncing filesystems ... done.
[676728.549474] PM: Preparing system for mem sleep
[676728.549478] Freezing user space processes ... (elapsed 0.00 seconds) done.
[676728.551555] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[676728.551646] PM: Entering mem sleep
[676728.551661] Suspending console(s) (use no_console_suspend to debug)
[676728.596014] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[676728.596104] sd 0:0:1:0: [sdb] Stopping disk
[676728.711421] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[676728.711481] sd 0:0:0:0: [sda] Stopping disk
[676729.384398] serial 00:0a: disabled
[676729.384420] pci 0000:01:00.0: PCI INT A disabled
[676729.384998] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[676729.400010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[676729.400016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[676729.400021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[676729.400026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[676729.400031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[676729.400107] pata_via 0000:00:0f.1: PCI INT A disabled
[676729.400163] sata_via 0000:00:0f.0: PCI INT B disabled
[676729.416703] skge 0000:00:0a.0: PME# enabled
[676729.448021] PM: suspend devices took 0.900 seconds
[676729.448159] ehci_hcd 0000:00:10.4: PME# disabled
[676729.464031] uhci_hcd 0000:00:10.3: PME# disabled
[676729.480030] uhci_hcd 0000:00:10.2: PME# disabled
[676729.496030] uhci_hcd 0000:00:10.1: PME# disabled
[676729.512030] uhci_hcd 0000:00:10.0: PME# disabled
[676729.528236] ACPI: Preparing to enter system sleep state S3
[676729.528745] Disabling non-boot CPUs ...
[676729.528805] Extended CMOS year: 2000
[676729.528805] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[676729.528805] Back to C!
[676729.528805] Extended CMOS year: 2000
[676729.528805] ACPI: Waking up from system sleep state S3
[676729.528805] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[676729.528805] uhci_hcd 0000:00:10.0: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[676729.528805] uhci_hcd 0000:00:10.1: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[676729.528805] uhci_hcd 0000:00:10.2: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[676729.528805] uhci_hcd 0000:00:10.3: PME# disabled
[676729.528805] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[676729.528805] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[676729.528805] ehci_hcd 0000:00:10.4: PME# disabled
[676729.528805] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[676729.528805] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[676729.528805] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[676729.528805] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[676729.528805] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[676729.528805] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[676729.528805] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[676729.528805] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[676729.528805] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[676729.528805] pci 0000:00:01.0: setting latency timer to 64
[676729.528805] skge 0000:00:0a.0: PME# disabled
[676729.528805] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[676729.528805] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[676729.528805] uhci_hcd 0000:00:10.0: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[676729.528805] usb usb2: root hub lost power or was reset
[676729.528805] uhci_hcd 0000:00:10.1: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[676729.528805] usb usb3: root hub lost power or was reset
[676729.528805] uhci_hcd 0000:00:10.2: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[676729.528805] usb usb4: root hub lost power or was reset
[676729.528805] uhci_hcd 0000:00:10.3: PME# disabled
[676729.528805] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[676729.528805] usb usb5: root hub lost power or was reset
[676729.528805] ehci_hcd 0000:00:10.4: PME# disabled
[676729.528805] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[676729.528805] pci 0000:00:11.0: PME# disabled
[676729.528805] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[676729.528805] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[676729.538233] pci 0000:00:11.6: PME# disabled
[676729.538238] pci 0000:01:00.0: PME# disabled
[676729.538243] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[676729.538249] pci 0000:01:00.1: PME# disabled
[676729.538897] serial 00:0a: activated
[676729.699157] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[676729.710215] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[676729.710218] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[676729.724223] ata2.00: configured for UDMA/33
[676729.740263] ata2.01: configured for UDMA/33
[676730.204072] sd 0:0:0:0: [sda] Starting disk
[676734.580006] ata1: link is slow to respond, please be patient (ready=0)
[676736.424336] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[676736.424339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[676736.425872] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[676736.440336] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[676736.440339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[676736.441875] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[676736.465760] ata1.00: configured for UDMA/133
[676736.481748] ata1.01: configured for UDMA/133
[676736.513770] ata1.00: configured for UDMA/133
[676736.529778] ata1.01: configured for UDMA/133
[676736.529781] ata1: EH complete
[676736.548833] sd 0:0:1:0: [sdb] Starting disk
[676739.572003] 
[676739.572004] floppy driver state
[676739.572006] -------------------
[676739.572009] now=169109893 last interrupt=4294900853 diff=169176336 last called handler=f8096500
[676739.572011] timeout_message=lock fdc
[676739.572013] last output bytes:
[676739.572015] 12 90 4294892640
[676739.572016]  0 90 4294892640
[676739.572018] 14 90 4294892640
[676739.572020] 18 80 4294892641
[676739.572022]  8 80 4294892641
[676739.572023]  8 80 4294892641
[676739.572025]  8 80 4294892641
[676739.572027]  8 80 4294892641
[676739.572029] 12 80 4294900772
[676739.572030]  0 90 4294900772
[676739.572032] 13 90 4294900772
[676739.572034]  0 90 4294900772
[676739.572035] 1a 90 4294900772
[676739.572037]  0 90 4294900772
[676739.572039]  3 90 4294900772
[676739.572041] c1 90 4294900772
[676739.572042] 10 90 4294900772
[676739.572044]  7 80 4294900772
[676739.572046]  0 90 4294900772
[676739.572047]  8 81 4294900853
[676739.572049] last result at 4294900853
[676739.572051] last redo_fd_request at 159482320
[676739.572052] 70  0 
[676739.572063] status=19
[676739.572064] fdc_busy=1
[676739.572066] do_floppy=f8092770
[676739.572067] cont=f809b904
[676739.572069] current_req=(null)
[676739.572070] command_status=-1
[676739.572072] 
[676739.572075] floppy0: floppy timeout called
[676739.832008] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[676740.248007] usb 3-2: reset full speed USB device using uhci_hcd and address 3
[676740.414907] usblp 3-2:1.0: no reset_resume for driver usblp?
[676740.414983] usblp0: removed
[676740.417948] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[676740.418025] PM: resume devices took 10.888 seconds
[676740.418026] ------------[ cut here ]------------
[676740.418035] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[676740.418037] Hardware name: System Product Name
[676740.418039] Component: resume devices, time: 10888
[676740.418041] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[676740.418071] Pid: 12626, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[676740.418073] Call Trace:
[676740.418080]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[676740.418084]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[676740.418088]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[676740.418092]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[676740.418096]  [<c0174e34>] suspend_test_finish+0x84/0x90
[676740.418099]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[676740.418103]  [<c056e92c>] ? printk+0x18/0x1c
[676740.418107]  [<c0174d09>] enter_state+0xb9/0xf0
[676740.418110]  [<c01743fd>] state_store+0x6d/0xb0
[676740.418113]  [<c0174390>] ? state_store+0x0/0xb0
[676740.418118]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[676740.418123]  [<c0239790>] sysfs_write_file+0x90/0x100
[676740.418127]  [<c01e792a>] vfs_write+0x9a/0x190
[676740.418131]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[676740.418135]  [<c057325b>] ? do_page_fault+0x19b/0x380
[676740.418139]  [<c01e83ed>] sys_write+0x3d/0x70
[676740.418142]  [<c010336c>] syscall_call+0x7/0xb
[676740.418145] ---[ end trace 9a0c1914c1210411 ]---
[676740.418182] PM: Finishing wakeup.
[676740.418184] Restarting tasks ... 
[676740.419130] usb 1-8: USB disconnect, address 8
[676740.442733] done.
[676742.916481] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[676742.916501] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[676742.916572] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[676742.916583] [drm] Loading R200 Microcode
[676743.156466] skge eth0: enabling interface
[676743.159810] ADDRCONF(NETDEV_UP): eth0: link is not ready
[676745.089344] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[676745.089561] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[676755.556009] eth0: no IPv6 routers present
[715854.712589] skge eth0: disabling interface
[715857.284975] PM: Syncing filesystems ... done.
[715857.289237] PM: Preparing system for mem sleep
[715857.289242] Freezing user space processes ... (elapsed 0.00 seconds) done.
[715857.291279] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[715857.291369] PM: Entering mem sleep
[715857.291384] Suspending console(s) (use no_console_suspend to debug)
[715857.320016] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[715857.320106] sd 0:0:1:0: [sdb] Stopping disk
[715857.442459] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[715857.546845] sd 0:0:0:0: [sda] Stopping disk
[715858.180382] serial 00:0a: disabled
[715858.180406] pci 0000:01:00.0: PCI INT A disabled
[715858.180996] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[715858.196010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[715858.196016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[715858.196021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[715858.196026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[715858.196031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[715858.196107] pata_via 0000:00:0f.1: PCI INT A disabled
[715858.196163] sata_via 0000:00:0f.0: PCI INT B disabled
[715858.212703] skge 0000:00:0a.0: PME# enabled
[715858.244021] PM: suspend devices took 0.956 seconds
[715858.244158] ehci_hcd 0000:00:10.4: PME# disabled
[715858.260030] uhci_hcd 0000:00:10.3: PME# disabled
[715858.276030] uhci_hcd 0000:00:10.2: PME# disabled
[715858.292030] uhci_hcd 0000:00:10.1: PME# disabled
[715858.308030] uhci_hcd 0000:00:10.0: PME# disabled
[715858.324232] ACPI: Preparing to enter system sleep state S3
[715858.324743] Disabling non-boot CPUs ...
[715858.324804] Extended CMOS year: 2000
[715858.324804] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[715858.324804] Back to C!
[715858.324804] Extended CMOS year: 2000
[715858.324804] ACPI: Waking up from system sleep state S3
[715858.324804] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[715858.324804] uhci_hcd 0000:00:10.0: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[715858.324804] uhci_hcd 0000:00:10.1: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[715858.324804] uhci_hcd 0000:00:10.2: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[715858.324804] uhci_hcd 0000:00:10.3: PME# disabled
[715858.324804] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[715858.324804] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[715858.324804] ehci_hcd 0000:00:10.4: PME# disabled
[715858.324804] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[715858.324804] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[715858.324804] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[715858.324804] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[715858.324804] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[715858.324804] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[715858.324804] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[715858.324804] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[715858.324804] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[715858.324804] pci 0000:00:01.0: setting latency timer to 64
[715858.324804] skge 0000:00:0a.0: PME# disabled
[715858.324804] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[715858.324804] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[715858.324804] uhci_hcd 0000:00:10.0: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[715858.324804] usb usb2: root hub lost power or was reset
[715858.324804] uhci_hcd 0000:00:10.1: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[715858.324804] usb usb3: root hub lost power or was reset
[715858.324804] uhci_hcd 0000:00:10.2: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[715858.324804] usb usb4: root hub lost power or was reset
[715858.324804] uhci_hcd 0000:00:10.3: PME# disabled
[715858.324804] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[715858.324804] usb usb5: root hub lost power or was reset
[715858.324804] ehci_hcd 0000:00:10.4: PME# disabled
[715858.324804] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[715858.324804] pci 0000:00:11.0: PME# disabled
[715858.324804] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[715858.324804] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[715858.334263] pci 0000:00:11.6: PME# disabled
[715858.334268] pci 0000:01:00.0: PME# disabled
[715858.334274] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[715858.334279] pci 0000:01:00.1: PME# disabled
[715858.334924] serial 00:0a: activated
[715858.495160] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[715858.506219] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[715858.506222] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[715858.520222] ata2.00: configured for UDMA/33
[715858.536264] ata2.01: configured for UDMA/33
[715858.880072] sd 0:0:0:0: [sda] Starting disk
[715863.376006] ata1: link is slow to respond, please be patient (ready=0)
[715865.332335] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[715865.332339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[715865.334322] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[715865.348336] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[715865.348339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[715865.349863] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[715865.374259] ata1.00: configured for UDMA/133
[715865.389764] ata1.01: configured for UDMA/133
[715865.421769] ata1.00: configured for UDMA/133
[715865.437760] ata1.01: configured for UDMA/133
[715865.437762] ata1: EH complete
[715865.457298] sd 0:0:1:0: [sdb] Starting disk
[715868.472003] 
[715868.472004] floppy driver state
[715868.472006] -------------------
[715868.472009] now=178892118 last interrupt=4294900853 diff=178958561 last called handler=f8096500
[715868.472011] timeout_message=lock fdc
[715868.472012] last output bytes:
[715868.472014] 12 90 4294892640
[715868.472016]  0 90 4294892640
[715868.472018] 14 90 4294892640
[715868.472019] 18 80 4294892641
[715868.472021]  8 80 4294892641
[715868.472023]  8 80 4294892641
[715868.472024]  8 80 4294892641
[715868.472026]  8 80 4294892641
[715868.472028] 12 80 4294900772
[715868.472029]  0 90 4294900772
[715868.472031] 13 90 4294900772
[715868.472033]  0 90 4294900772
[715868.472034] 1a 90 4294900772
[715868.472036]  0 90 4294900772
[715868.472038]  3 90 4294900772
[715868.472039] c1 90 4294900772
[715868.472041] 10 90 4294900772
[715868.472042]  7 80 4294900772
[715868.472044]  0 90 4294900772
[715868.472046]  8 81 4294900853
[715868.472047] last result at 4294900853
[715868.472049] last redo_fd_request at 169109893
[715868.472050] 70  0 
[715868.472061] status=19
[715868.472063] fdc_busy=1
[715868.472064] do_floppy=f8092770
[715868.472065] cont=f809b904
[715868.472067] current_req=(null)
[715868.472068] command_status=-1
[715868.472070] 
[715868.472073] floppy0: floppy timeout called
[715868.732007] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[715869.148006] usb 3-2: reset full speed USB device using uhci_hcd and address 3
[715869.314862] usblp 3-2:1.0: no reset_resume for driver usblp?
[715869.314936] usblp0: removed
[715869.317902] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[715869.317980] PM: resume devices took 10.992 seconds
[715869.317982] ------------[ cut here ]------------
[715869.317990] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[715869.317993] Hardware name: System Product Name
[715869.317995] Component: resume devices, time: 10992
[715869.317996] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[715869.318026] Pid: 14901, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[715869.318029] Call Trace:
[715869.318035]  [<c0215b23>] ? inotify_remove_watch_locked+0x13/0x50
[715869.318041]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[715869.318045]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[715869.318049]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[715869.318052]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[715869.318056]  [<c0174e34>] suspend_test_finish+0x84/0x90
[715869.318060]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[715869.318064]  [<c056e92c>] ? printk+0x18/0x1c
[715869.318067]  [<c0174d09>] enter_state+0xb9/0xf0
[715869.318071]  [<c01743fd>] state_store+0x6d/0xb0
[715869.318074]  [<c0174390>] ? state_store+0x0/0xb0
[715869.318079]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[715869.318083]  [<c0239790>] sysfs_write_file+0x90/0x100
[715869.318088]  [<c01e792a>] vfs_write+0x9a/0x190
[715869.318091]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[715869.318096]  [<c057325b>] ? do_page_fault+0x19b/0x380
[715869.318099]  [<c01e83ed>] sys_write+0x3d/0x70
[715869.318103]  [<c010336c>] syscall_call+0x7/0xb
[715869.318105] ---[ end trace 9a0c1914c1210412 ]---
[715869.318142] PM: Finishing wakeup.
[715869.318144] Restarting tasks ... done.
[715872.075774] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[715872.075793] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[715872.075864] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[715872.075875] [drm] Loading R200 Microcode
[715873.218666] skge eth0: enabling interface
[715873.222000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[715875.169916] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[715875.170139] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[715885.540006] eth0: no IPv6 routers present
[743473.396117] skge eth0: disabling interface
[743476.767303] PM: Syncing filesystems ... done.
[743476.785047] PM: Preparing system for mem sleep
[743476.785052] Freezing user space processes ... (elapsed 0.00 seconds) done.
[743476.791599] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[743476.791689] PM: Entering mem sleep
[743476.791704] Suspending console(s) (use no_console_suspend to debug)
[743476.820016] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[743476.820102] sd 0:0:1:0: [sdb] Stopping disk
[743476.940157] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[743477.007195] sd 0:0:0:0: [sda] Stopping disk
[743477.644391] serial 00:0a: disabled
[743477.644414] pci 0000:01:00.0: PCI INT A disabled
[743477.644998] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[743477.660010] ehci_hcd 0000:00:10.4: PCI INT C disabled
[743477.660016] uhci_hcd 0000:00:10.3: PCI INT B disabled
[743477.660021] uhci_hcd 0000:00:10.2: PCI INT B disabled
[743477.660026] uhci_hcd 0000:00:10.1: PCI INT A disabled
[743477.660031] uhci_hcd 0000:00:10.0: PCI INT A disabled
[743477.660103] pata_via 0000:00:0f.1: PCI INT A disabled
[743477.660159] sata_via 0000:00:0f.0: PCI INT B disabled
[743477.676702] skge 0000:00:0a.0: PME# enabled
[743477.708020] PM: suspend devices took 0.920 seconds
[743477.708156] ehci_hcd 0000:00:10.4: PME# disabled
[743477.724030] uhci_hcd 0000:00:10.3: PME# disabled
[743477.740030] uhci_hcd 0000:00:10.2: PME# disabled
[743477.756030] uhci_hcd 0000:00:10.1: PME# disabled
[743477.772030] uhci_hcd 0000:00:10.0: PME# disabled
[743477.788235] ACPI: Preparing to enter system sleep state S3
[743477.788755] Disabling non-boot CPUs ...
[743477.788817] Extended CMOS year: 2000
[743477.788817] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[743477.788817] Back to C!
[743477.788817] Extended CMOS year: 2000
[743477.788817] ACPI: Waking up from system sleep state S3
[743477.788817] uhci_hcd 0000:00:10.0: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[743477.788817] uhci_hcd 0000:00:10.0: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.1: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[743477.788817] uhci_hcd 0000:00:10.1: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.2: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[743477.788817] uhci_hcd 0000:00:10.2: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.3: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[743477.788817] uhci_hcd 0000:00:10.3: PME# disabled
[743477.788817] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
[743477.788817] ehci_hcd 0000:00:10.4: restoring config space at offset 0x1 (was 0x2100017, writing 0x2100013)
[743477.788817] ehci_hcd 0000:00:10.4: PME# disabled
[743477.788817] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[743477.788817] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[743477.788817] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[743477.788817] pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
[743477.788817] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00107, writing 0x2b00103)
[743477.788817] pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfbf00000)
[743477.788817] pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xf0000008)
[743477.788817] pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[743477.788817] pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[743477.788817] pci 0000:00:01.0: setting latency timer to 64
[743477.788817] skge 0000:00:0a.0: PME# disabled
[743477.788817] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[743477.788817] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[743477.788817] uhci_hcd 0000:00:10.0: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[743477.788817] usb usb2: root hub lost power or was reset
[743477.788817] uhci_hcd 0000:00:10.1: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[743477.788817] usb usb3: root hub lost power or was reset
[743477.788817] uhci_hcd 0000:00:10.2: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[743477.788817] usb usb4: root hub lost power or was reset
[743477.788817] uhci_hcd 0000:00:10.3: PME# disabled
[743477.788817] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[743477.788817] usb usb5: root hub lost power or was reset
[743477.788817] ehci_hcd 0000:00:10.4: PME# disabled
[743477.788817] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[743477.788817] pci 0000:00:11.0: PME# disabled
[743477.788817] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[743477.788817] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[743477.798290] pci 0000:00:11.6: PME# disabled
[743477.798295] pci 0000:01:00.0: PME# disabled
[743477.798300] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[743477.798306] pci 0000:01:00.1: PME# disabled
[743477.798980] serial 00:0a: activated
[743477.959163] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
[743477.970236] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[743477.970239] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[743477.984228] ata2.00: configured for UDMA/33
[743478.000271] ata2.01: configured for UDMA/33
[743478.440073] sd 0:0:0:0: [sda] Starting disk
[743482.840014] ata1: link is slow to respond, please be patient (ready=0)
[743484.740336] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 filtered out
[743484.740339] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 filtered out
[743484.741870] ata1.01: ACPI cmd c6/00:10:00:00:00:b0 succeeded
[743484.756335] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[743484.756339] ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[743484.757871] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[743484.781756] ata1.00: configured for UDMA/133
[743484.797747] ata1.01: configured for UDMA/133
[743484.829766] ata1.00: configured for UDMA/133
[743484.845776] ata1.01: configured for UDMA/133
[743484.845779] ata1: EH complete
[743484.870426] sd 0:0:1:0: [sdb] Starting disk
[743487.888002] 
[743487.888003] floppy driver state
[743487.888005] -------------------
[743487.888008] now=185796972 last interrupt=4294900853 diff=185863415 last called handler=f8096500
[743487.888010] timeout_message=lock fdc
[743487.888011] last output bytes:
[743487.888013] 12 90 4294892640
[743487.888015]  0 90 4294892640
[743487.888017] 14 90 4294892640
[743487.888019] 18 80 4294892641
[743487.888020]  8 80 4294892641
[743487.888022]  8 80 4294892641
[743487.888024]  8 80 4294892641
[743487.888026]  8 80 4294892641
[743487.888027] 12 80 4294900772
[743487.888029]  0 90 4294900772
[743487.888031] 13 90 4294900772
[743487.888033]  0 90 4294900772
[743487.888034] 1a 90 4294900772
[743487.888036]  0 90 4294900772
[743487.888038]  3 90 4294900772
[743487.888039] c1 90 4294900772
[743487.888041] 10 90 4294900772
[743487.888043]  7 80 4294900772
[743487.888045]  0 90 4294900772
[743487.888046]  8 81 4294900853
[743487.888048] last result at 4294900853
[743487.888049] last redo_fd_request at 178892118
[743487.888051] 70  0 
[743487.888062] status=19
[743487.888063] fdc_busy=1
[743487.888065] do_floppy=f8092770
[743487.888066] cont=f809b904
[743487.888068] current_req=(null)
[743487.888069] command_status=-1
[743487.888071] 
[743487.888074] floppy0: floppy timeout called
[743488.148006] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[743488.564006] usb 3-2: reset full speed USB device using uhci_hcd and address 3
[743488.730891] usblp 3-2:1.0: no reset_resume for driver usblp?
[743488.730984] usblp0: removed
[743488.733930] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[743488.734007] PM: resume devices took 10.944 seconds
[743488.734009] ------------[ cut here ]------------
[743488.734017] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:53 suspend_test_finish+0x84/0x90()
[743488.734020] Hardware name: System Product Name
[743488.734022] Component: resume devices, time: 10944
[743488.734024] Modules linked in: usb_storage nls_utf8 isofs binfmt_misc ppdev snd_via82xx gameport snd_mpu401_uart snd_via82xx_modem snd_ac97_codec snd_seq_dummy snd_seq_oss lp ac97_bus parport snd_seq_midi snd_rawmidi snd_pcm_oss snd_seq_midi_event snd_mixer_oss snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device shpchp snd soundcore i2c_viapro usblp k8temp dm_raid45 xor radeon ttm drm amd64_agp hid_a4tech usbhid i2c_algo_bit floppy agpgart sata_via skge
[743488.734053] Pid: 16889, comm: pm-suspend Tainted: G        W  2.6.31-17-generic #54-Ubuntu
[743488.734056] Call Trace:
[743488.734063]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
[743488.734067]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[743488.734070]  [<c0174e34>] ? suspend_test_finish+0x84/0x90
[743488.734074]  [<c0145176>] warn_slowpath_fmt+0x26/0x30
[743488.734078]  [<c0174e34>] suspend_test_finish+0x84/0x90
[743488.734082]  [<c0174c1f>] suspend_devices_and_enter+0x9f/0xd0
[743488.734086]  [<c056e92c>] ? printk+0x18/0x1c
[743488.734089]  [<c0174d09>] enter_state+0xb9/0xf0
[743488.734093]  [<c01743fd>] state_store+0x6d/0xb0
[743488.734096]  [<c0174390>] ? state_store+0x0/0xb0
[743488.734101]  [<c0311fb0>] kobj_attr_store+0x20/0x30
[743488.734105]  [<c0239790>] sysfs_write_file+0x90/0x100
[743488.734110]  [<c01e792a>] vfs_write+0x9a/0x190
[743488.734113]  [<c0239700>] ? sysfs_write_file+0x0/0x100
[743488.734118]  [<c057325b>] ? do_page_fault+0x19b/0x380
[743488.734121]  [<c01e83ed>] sys_write+0x3d/0x70
[743488.734125]  [<c010336c>] syscall_call+0x7/0xb
[743488.734128] ---[ end trace 9a0c1914c1210413 ]---
[743488.734164] PM: Finishing wakeup.
[743488.734166] Restarting tasks ... 
[743488.735135] hub 1-0:1.0: over-current change on port 1
[743488.770409] done.
[743488.836097] hub 1-0:1.0: over-current change on port 2
[743488.940021] hub 1-0:1.0: over-current change on port 3
[743489.052050] hub 1-0:1.0: over-current change on port 4
[743489.156020] hub 1-0:1.0: over-current change on port 5
[743489.260021] hub 1-0:1.0: over-current change on port 6
[743489.364022] hub 1-0:1.0: over-current change on port 7
[743489.472022] hub 1-0:1.0: over-current change on port 8
[743492.094590] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[743492.094611] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[743492.094682] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[743492.094694] [drm] Loading R200 Microcode
[743492.259539] skge eth0: enabling interface
[743492.262872] ADDRCONF(NETDEV_UP): eth0: link is not ready
[743494.239979] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[743494.240200] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[743504.448006] eth0: no IPv6 routers present