[ 0.000000] microcode: microcode updated early to revision 0xde, date = 2020-05-26 [ 0.000000] Linux version 5.4.0-59-generic (buildd@lcy01-amd64-028) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #65-Ubuntu SMP Thu Dec 10 12:01:51 UTC 2020 (Ubuntu 5.4.0-59.65-generic 5.4.78) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=242a08b2-ff20-4e23-b764-50e33def3c1b ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000093ffafff] usable [ 0.000000] BIOS-e820: [mem 0x0000000093ffb000-0x0000000093ffbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000093ffc000-0x0000000093ffcfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000093ffd000-0x000000009ccc5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ccc6000-0x000000009e578fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009e579000-0x000000009e5befff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009e5bf000-0x000000009e9b0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009e9b1000-0x000000009fba1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009fba2000-0x000000009fbfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x000000009fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000085effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x937b2018-0x937d1857] usable ==> usable [ 0.000000] e820: update [mem 0x937b2018-0x937d1857] usable ==> usable [ 0.000000] e820: update [mem 0x93794018-0x937b1a57] usable ==> usable [ 0.000000] e820: update [mem 0x93794018-0x937b1a57] usable ==> usable [ 0.000000] e820: update [mem 0x93783018-0x93793e57] usable ==> usable [ 0.000000] e820: update [mem 0x93783018-0x93793e57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093783017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093783018-0x0000000093793e57] usable [ 0.000000] reserve setup_data: [mem 0x0000000093793e58-0x0000000093794017] usable [ 0.000000] reserve setup_data: [mem 0x0000000093794018-0x00000000937b1a57] usable [ 0.000000] reserve setup_data: [mem 0x00000000937b1a58-0x00000000937b2017] usable [ 0.000000] reserve setup_data: [mem 0x00000000937b2018-0x00000000937d1857] usable [ 0.000000] reserve setup_data: [mem 0x00000000937d1858-0x0000000093ffafff] usable [ 0.000000] reserve setup_data: [mem 0x0000000093ffb000-0x0000000093ffbfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000093ffc000-0x0000000093ffcfff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000093ffd000-0x000000009ccc5fff] usable [ 0.000000] reserve setup_data: [mem 0x000000009ccc6000-0x000000009e578fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009e579000-0x000000009e5befff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009e5bf000-0x000000009e9b0fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009e9b1000-0x000000009fba1fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009fba2000-0x000000009fbfffff] usable [ 0.000000] reserve setup_data: [mem 0x000000009fc00000-0x000000009fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000085effffff] usable [ 0.000000] efi: EFI v2.60 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x9e587000 ACPI=0x9e587000 SMBIOS=0x9fa32000 SMBIOS 3.0=0x9fa31000 MPS=0xfc9f0 ESRT=0x9b38f818 MEMATTR=0x9954c018 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: System manufacturer System Product Name/MAXIMUS IX HERO, BIOS 1301 03/14/2018 [ 0.000000] tsc: Detected 3600.000 MHz processor [ 0.002021] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002022] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002027] last_pfn = 0x85f000 max_arch_pfn = 0x400000000 [ 0.002030] MTRR default type: write-back [ 0.002030] MTRR fixed ranges enabled: [ 0.002031] 00000-9FFFF write-back [ 0.002032] A0000-BFFFF uncachable [ 0.002032] C0000-FFFFF write-protect [ 0.002033] MTRR variable ranges enabled: [ 0.002034] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.002035] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.002035] 2 base 2000000000 mask 7000000000 uncachable [ 0.002036] 3 disabled [ 0.002036] 4 disabled [ 0.002036] 5 disabled [ 0.002036] 6 disabled [ 0.002037] 7 disabled [ 0.002037] 8 disabled [ 0.002037] 9 disabled [ 0.002400] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002535] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000 [ 0.007956] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] [ 0.007964] esrt: Reserving ESRT space from 0x000000009b38f818 to 0x000000009b38f850. [ 0.007967] e820: update [mem 0x9b38f000-0x9b38ffff] usable ==> reserved [ 0.007977] check: Scanning 1 areas for low memory corruption [ 0.007982] Using GB pages for direct mapping [ 0.008571] secureboot: Secure boot disabled [ 0.008571] RAMDISK: [mem 0x3d01a000-0x3fffdfff] [ 0.008577] ACPI: Early table checksum verification disabled [ 0.008579] ACPI: RSDP 0x000000009E587000 000024 (v02 ALASKA) [ 0.008581] ACPI: XSDT 0x000000009E5870B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008585] ACPI: FACP 0x000000009E5B35A0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.008588] ACPI: DSDT 0x000000009E587228 02C378 (v02 ALASKA A M I 01072009 INTL 20160422) [ 0.008590] ACPI: FACS 0x000000009E9B0F00 000040 [ 0.008591] ACPI: APIC 0x000000009E5B36B8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.008593] ACPI: FPDT 0x000000009E5B3778 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008595] ACPI: FIDT 0x000000009E5B37C0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008596] ACPI: WSMT 0x000000009E5BE940 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008598] ACPI: MCFG 0x000000009E5B38B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.008600] ACPI: SSDT 0x000000009E5B38F8 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.008602] ACPI: SSDT 0x000000009E5B3CA0 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.008603] ACPI: SSDT 0x000000009E5B6E18 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.008605] ACPI: HPET 0x000000009E5B93C0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) [ 0.008607] ACPI: SSDT 0x000000009E5B93F8 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422) [ 0.008608] ACPI: SSDT 0x000000009E5B9420 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422) [ 0.008610] ACPI: UEFI 0x000000009E5B9F38 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.008612] ACPI: SSDT 0x000000009E5B9F80 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.008614] ACPI: LPIT 0x000000009E5BAE60 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.008615] ACPI: SSDT 0x000000009E5BAEF8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.008617] ACPI: SSDT 0x000000009E5BB040 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.008619] ACPI: SSDT 0x000000009E5BB2E0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.008620] ACPI: SSDT 0x000000009E5BE2E8 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.008622] ACPI: DBGP 0x000000009E5BE7F8 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.008624] ACPI: DBG2 0x000000009E5BE830 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.008625] ACPI: DMAR 0x000000009E5BE888 000080 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.008627] ACPI: BGRT 0x000000009E5BE908 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008633] ACPI: Local APIC address 0xfee00000 [ 0.008767] No NUMA configuration found [ 0.008768] Faking a node at [mem 0x0000000000000000-0x000000085effffff] [ 0.008773] NODE_DATA(0) allocated [mem 0x85efd5000-0x85effffff] [ 0.008946] Zone ranges: [ 0.008947] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008948] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008948] Normal [mem 0x0000000100000000-0x000000085effffff] [ 0.008949] Device empty [ 0.008949] Movable zone start for each node [ 0.008952] Early memory node ranges [ 0.008952] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.008953] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.008953] node 0: [mem 0x0000000000100000-0x0000000093ffafff] [ 0.008954] node 0: [mem 0x0000000093ffd000-0x000000009ccc5fff] [ 0.008954] node 0: [mem 0x000000009fba2000-0x000000009fbfffff] [ 0.008955] node 0: [mem 0x0000000100000000-0x000000085effffff] [ 0.009034] Zeroed struct page in unavailable ranges: 17217 pages [ 0.009034] Initmem setup node 0 [mem 0x0000000000001000-0x000000085effffff] [ 0.009036] On node 0 totalpages: 8371391 [ 0.009036] DMA zone: 64 pages used for memmap [ 0.009037] DMA zone: 54 pages reserved [ 0.009037] DMA zone: 3997 pages, LIFO batch:0 [ 0.009070] DMA32 zone: 9973 pages used for memmap [ 0.009071] DMA32 zone: 638242 pages, LIFO batch:63 [ 0.015182] Normal zone: 120768 pages used for memmap [ 0.015182] Normal zone: 7729152 pages, LIFO batch:63 [ 0.073348] ACPI: PM-Timer IO Port: 0x1808 [ 0.073349] ACPI: Local APIC address 0xfee00000 [ 0.073353] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.073354] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.073354] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.073355] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.073355] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.073355] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.073356] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.073356] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.073381] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.073383] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.073384] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.073385] ACPI: IRQ0 used by override. [ 0.073385] ACPI: IRQ9 used by override. [ 0.073386] Using ACPI (MADT) for SMP configuration information [ 0.073387] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.073391] e820: update [mem 0x99de7000-0x99e2cfff] usable ==> reserved [ 0.073398] TSC deadline timer available [ 0.073399] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.073412] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.073413] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.073414] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.073415] PM: Registered nosave memory: [mem 0x93783000-0x93783fff] [ 0.073416] PM: Registered nosave memory: [mem 0x93793000-0x93793fff] [ 0.073417] PM: Registered nosave memory: [mem 0x93794000-0x93794fff] [ 0.073418] PM: Registered nosave memory: [mem 0x937b1000-0x937b1fff] [ 0.073418] PM: Registered nosave memory: [mem 0x937b2000-0x937b2fff] [ 0.073419] PM: Registered nosave memory: [mem 0x937d1000-0x937d1fff] [ 0.073420] PM: Registered nosave memory: [mem 0x93ffb000-0x93ffbfff] [ 0.073421] PM: Registered nosave memory: [mem 0x93ffc000-0x93ffcfff] [ 0.073422] PM: Registered nosave memory: [mem 0x99de7000-0x99e2cfff] [ 0.073423] PM: Registered nosave memory: [mem 0x9b38f000-0x9b38ffff] [ 0.073424] PM: Registered nosave memory: [mem 0x9ccc6000-0x9e578fff] [ 0.073424] PM: Registered nosave memory: [mem 0x9e579000-0x9e5befff] [ 0.073424] PM: Registered nosave memory: [mem 0x9e5bf000-0x9e9b0fff] [ 0.073425] PM: Registered nosave memory: [mem 0x9e9b1000-0x9fba1fff] [ 0.073426] PM: Registered nosave memory: [mem 0x9fc00000-0x9fffffff] [ 0.073426] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff] [ 0.073426] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.073427] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.073427] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.073427] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.073428] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.073428] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.073428] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.073429] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff] [ 0.073429] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.073429] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.073430] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.073431] [mem 0xa0000000-0xdfffffff] available for PCI devices [ 0.073432] Booting paravirtualized kernel on bare hardware [ 0.073434] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.073437] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.073555] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.073560] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.073560] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.073580] Built 1 zonelists, mobility grouping on. Total pages: 8240532 [ 0.073580] Policy zone: Normal [ 0.073581] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-59-generic root=UUID=242a08b2-ff20-4e23-b764-50e33def3c1b ro quiet splash vt.handoff=7 [ 0.074696] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.075233] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.075285] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.077454] Calgary: detecting Calgary via BIOS EBDA area [ 0.077455] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.123710] Memory: 32733008K/33485564K available (14339K kernel code, 2399K rwdata, 4960K rodata, 2724K init, 4980K bss, 752556K reserved, 0K cma-reserved) [ 0.123714] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.123810] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.123820] Kernel/User page tables isolation: enabled [ 0.123828] ftrace: allocating 44555 entries in 175 pages [ 0.135802] rcu: Hierarchical RCU implementation. [ 0.135803] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.135804] Tasks RCU enabled. [ 0.135804] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.135804] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.137646] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.138070] random: crng done (trusting CPU's manufacturer) [ 0.138084] vt handoff: transparent VT on vt#7 [ 0.138089] Console: colour dummy device 80x25 [ 0.138092] printk: console [tty0] enabled [ 0.138105] ACPI: Core revision 20190816 [ 0.138356] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.138420] APIC: Switch to symmetric I/O mode setup [ 0.138421] DMAR: Host address width 39 [ 0.138422] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.138426] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.138427] DMAR: RMRR base: 0x0000009d4e1000 end: 0x0000009d500fff [ 0.138428] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 0.138429] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.138429] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.139720] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.139720] x2apic enabled [ 0.139732] Switched APIC routing to cluster x2apic. [ 0.143607] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.162394] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns [ 0.162397] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=14400000) [ 0.162398] pid_max: default: 32768 minimum: 301 [ 0.163740] LSM: Security Framework initializing [ 0.163746] Yama: becoming mindful. [ 0.163772] AppArmor: AppArmor initialized [ 0.163825] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.163858] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.163869] *** VALIDATE tmpfs *** [ 0.163964] *** VALIDATE proc *** [ 0.163996] *** VALIDATE cgroup1 *** [ 0.163996] *** VALIDATE cgroup2 *** [ 0.164041] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.164056] process: using mwait in idle threads [ 0.164058] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.164058] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.164060] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.164060] Spectre V2 : Mitigation: Full generic retpoline [ 0.164061] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.164061] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.164062] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.164062] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.164063] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.164065] TAA: Mitigation: Clear CPU buffers [ 0.164068] SRBDS: Mitigation: Microcode [ 0.164068] MDS: Mitigation: Clear CPU buffers [ 0.164242] Freeing SMP alternatives memory: 40K [ 0.166450] smpboot: CPU0: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0x9) [ 0.166545] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.166549] ... version: 4 [ 0.166549] ... bit width: 48 [ 0.166550] ... generic registers: 4 [ 0.166550] ... value mask: 0000ffffffffffff [ 0.166551] ... max period: 00007fffffffffff [ 0.166551] ... fixed-purpose events: 3 [ 0.166551] ... event mask: 000000070000000f [ 0.166577] rcu: Hierarchical SRCU implementation. [ 0.167295] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.167347] smp: Bringing up secondary CPUs ... [ 0.167402] x86: Booting SMP configuration: [ 0.167403] .... node #0, CPUs: #1 #2 #3 #4 [ 0.172075] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.172075] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.172075] #5 #6 #7 [ 0.174711] smp: Brought up 1 node, 8 CPUs [ 0.174711] smpboot: Max logical packages: 1 [ 0.174711] smpboot: Total of 8 processors activated (57600.00 BogoMIPS) [ 0.176456] devtmpfs: initialized [ 0.176456] x86/mm: Memory block size: 128MB [ 0.180022] PM: Registering ACPI NVS region [mem 0x93ffb000-0x93ffbfff] (4096 bytes) [ 0.180022] PM: Registering ACPI NVS region [mem 0x9e5bf000-0x9e9b0fff] (4136960 bytes) [ 0.180022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.180022] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.180022] pinctrl core: initialized pinctrl subsystem [ 0.180022] PM: RTC time: 08:03:36, date: 2021-01-07 [ 0.180022] NET: Registered protocol family 16 [ 0.180022] audit: initializing netlink subsys (disabled) [ 0.180022] audit: type=2000 audit(1610006615.040:1): state=initialized audit_enabled=0 res=1 [ 0.180022] EISA bus registered [ 0.180022] cpuidle: using governor ladder [ 0.180022] cpuidle: using governor menu [ 0.180022] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.180022] ACPI: bus type PCI registered [ 0.180022] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.180022] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.180022] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.180022] PCI: Using configuration type 1 for base access [ 0.180022] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.183162] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.183162] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.183162] ACPI: Added _OSI(Module Device) [ 0.183162] ACPI: Added _OSI(Processor Device) [ 0.183162] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.183162] ACPI: Added _OSI(Processor Aggregator Device) [ 0.183162] ACPI: Added _OSI(Linux-Dell-Video) [ 0.183162] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.183162] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.217853] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.226621] ACPI: Dynamic OEM Table Load: [ 0.226625] ACPI: SSDT 0xFFFF98A73AFF1800 000759 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.227977] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.227977] ACPI: Dynamic OEM Table Load: [ 0.227977] ACPI: SSDT 0xFFFF98A73A67B800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.227977] ACPI: Dynamic OEM Table Load: [ 0.227977] ACPI: SSDT 0xFFFF98A73A680A00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.228840] ACPI: Dynamic OEM Table Load: [ 0.228843] ACPI: SSDT 0xFFFF98A73A681E00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.230730] ACPI: Dynamic OEM Table Load: [ 0.230735] ACPI: SSDT 0xFFFF98A73A8A7000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.234525] ACPI: Dynamic OEM Table Load: [ 0.234528] ACPI: SSDT 0xFFFF98A73A40CC00 000197 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.235773] ACPI: Dynamic OEM Table Load: [ 0.235776] ACPI: SSDT 0xFFFF98A73A40E600 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.237377] ACPI: EC: EC started [ 0.237378] ACPI: EC: interrupt blocked [ 0.237393] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.237394] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.237395] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.237395] ACPI: Interpreter enabled [ 0.237428] ACPI: (supports S0 S3 S4 S5) [ 0.237429] ACPI: Using IOAPIC for interrupt routing [ 0.237458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.238482] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.241233] ACPI: Power Resource [PG00] (on) [ 0.241547] ACPI: Power Resource [PG01] (on) [ 0.241857] ACPI: Power Resource [PG02] (on) [ 0.243819] ACPI: Power Resource [WRST] (on) [ 0.244184] ACPI: Power Resource [WRST] (on) [ 0.244548] ACPI: Power Resource [WRST] (on) [ 0.244908] ACPI: Power Resource [WRST] (on) [ 0.245271] ACPI: Power Resource [WRST] (on) [ 0.245638] ACPI: Power Resource [WRST] (on) [ 0.246001] ACPI: Power Resource [WRST] (on) [ 0.246362] ACPI: Power Resource [WRST] (on) [ 0.246724] ACPI: Power Resource [WRST] (on) [ 0.247189] ACPI: Power Resource [WRST] (on) [ 0.247553] ACPI: Power Resource [WRST] (on) [ 0.248012] ACPI: Power Resource [WRST] (on) [ 0.248376] ACPI: Power Resource [WRST] (on) [ 0.248748] ACPI: Power Resource [WRST] (on) [ 0.249111] ACPI: Power Resource [WRST] (on) [ 0.249476] ACPI: Power Resource [WRST] (on) [ 0.249836] ACPI: Power Resource [WRST] (on) [ 0.251274] ACPI: Power Resource [WRST] (on) [ 0.251637] ACPI: Power Resource [WRST] (on) [ 0.252003] ACPI: Power Resource [WRST] (on) [ 0.266380] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.266385] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.266577] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.266758] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.266759] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.267797] PCI host bridge to bus 0000:00 [ 0.267799] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.267800] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.267800] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.267801] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window] [ 0.267802] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window] [ 0.267802] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.267803] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.267810] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000 [ 0.268124] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.268160] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.268402] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 [ 0.268421] pci 0000:00:14.0: reg 0x10: [mem 0x2ffff10000-0x2ffff1ffff 64bit] [ 0.268477] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.268692] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 [ 0.268714] pci 0000:00:16.0: reg 0x10: [mem 0x2ffff25000-0x2ffff25fff 64bit] [ 0.268770] pci 0000:00:16.0: PME# supported from D3hot [ 0.268954] pci 0000:00:17.0: [8086:2822] type 00 class 0x010400 [ 0.268967] pci 0000:00:17.0: reg 0x10: [mem 0xdf424000-0xdf425fff] [ 0.268973] pci 0000:00:17.0: reg 0x14: [mem 0xdf427000-0xdf4270ff] [ 0.268978] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] [ 0.268984] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] [ 0.268989] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] [ 0.268994] pci 0000:00:17.0: reg 0x24: [mem 0xdf426000-0xdf4267ff] [ 0.269027] pci 0000:00:17.0: PME# supported from D3hot [ 0.269169] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400 [ 0.269236] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.269424] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400 [ 0.269487] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.269658] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400 [ 0.269719] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.269893] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400 [ 0.269953] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.270124] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 [ 0.270185] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.270379] pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100 [ 0.270606] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 [ 0.270620] pci 0000:00:1f.2: reg 0x10: [mem 0xdf420000-0xdf423fff] [ 0.270792] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 [ 0.270816] pci 0000:00:1f.3: reg 0x10: [mem 0x2ffff20000-0x2ffff23fff 64bit] [ 0.270844] pci 0000:00:1f.3: reg 0x20: [mem 0x2ffff00000-0x2ffff0ffff 64bit] [ 0.270887] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.271117] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 [ 0.271176] pci 0000:00:1f.4: reg 0x10: [mem 0x2ffff24000-0x2ffff240ff 64bit] [ 0.271245] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] [ 0.271454] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.271478] pci 0000:00:1f.6: reg 0x10: [mem 0xdf400000-0xdf41ffff] [ 0.271579] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.271746] pci 0000:01:00.0: [10de:1004] type 00 class 0x030000 [ 0.271765] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] [ 0.271774] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.271784] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref] [ 0.271790] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.271796] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref] [ 0.271811] pci 0000:01:00.0: BAR 3: assigned to efifb [ 0.271868] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.271910] pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300 [ 0.271924] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff] [ 0.272039] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring [ 0.286441] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.286447] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.286453] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.286460] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] [ 0.286550] pci 0000:00:1b.0: PCI bridge to [bus 02] [ 0.286617] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.286693] pci 0000:04:00.0: [1b21:2142] type 00 class 0x0c0330 [ 0.286719] pci 0000:04:00.0: reg 0x10: [mem 0xdf300000-0xdf307fff 64bit] [ 0.286761] pci 0000:04:00.0: enabling Extended Tags [ 0.286823] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.286946] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.286949] pci 0000:00:1c.4: bridge window [mem 0xdf300000-0xdf3fffff] [ 0.287025] pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330 [ 0.287050] pci 0000:05:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit] [ 0.287093] pci 0000:05:00.0: enabling Extended Tags [ 0.287154] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.287275] pci 0000:00:1c.6: PCI bridge to [bus 05] [ 0.287278] pci 0000:00:1c.6: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.287350] pci 0000:06:00.0: [144d:a808] type 00 class 0x010802 [ 0.287375] pci 0000:06:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit] [ 0.287585] pci 0000:00:1d.0: PCI bridge to [bus 06] [ 0.287588] pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.289526] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.289576] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.289625] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.289673] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.289721] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.289769] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.289817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.289865] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.290397] ACPI: EC: interrupt unblocked [ 0.290397] ACPI: EC: event unblocked [ 0.290397] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.290397] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.290404] iommu: Default domain type: Translated [ 0.290406] SCSI subsystem initialized [ 0.290414] libata version 3.00 loaded. [ 0.290414] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.290414] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.290414] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.290414] vgaarb: loaded [ 0.290420] ACPI: bus type USB registered [ 0.290428] usbcore: registered new interface driver usbfs [ 0.290433] usbcore: registered new interface driver hub [ 0.290446] usbcore: registered new device driver usb [ 0.290462] pps_core: LinuxPPS API ver. 1 registered [ 0.290463] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.290464] PTP clock support registered [ 0.290476] EDAC MC: Ver: 3.0.0 [ 0.290476] Registered efivars operations [ 0.290476] PCI: Using ACPI for IRQ routing [ 0.317792] PCI: pci_cache_line_size set to 64 bytes [ 0.317841] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.317841] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.317842] e820: reserve RAM buffer [mem 0x93783018-0x93ffffff] [ 0.317843] e820: reserve RAM buffer [mem 0x93794018-0x93ffffff] [ 0.317843] e820: reserve RAM buffer [mem 0x937b2018-0x93ffffff] [ 0.317844] e820: reserve RAM buffer [mem 0x93ffb000-0x93ffffff] [ 0.317844] e820: reserve RAM buffer [mem 0x99de7000-0x9bffffff] [ 0.317845] e820: reserve RAM buffer [mem 0x9b38f000-0x9bffffff] [ 0.317845] e820: reserve RAM buffer [mem 0x9ccc6000-0x9fffffff] [ 0.317846] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff] [ 0.317847] e820: reserve RAM buffer [mem 0x85f000000-0x85fffffff] [ 0.317908] NetLabel: Initializing [ 0.317909] NetLabel: domain hash size = 128 [ 0.317909] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.317918] NetLabel: unlabeled traffic allowed by default [ 0.318461] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.318463] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.322396] clocksource: Switched to clocksource tsc-early [ 0.330189] *** VALIDATE bpf *** [ 0.330235] VFS: Disk quotas dquot_6.6.0 [ 0.330244] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.330259] *** VALIDATE ramfs *** [ 0.330261] *** VALIDATE hugetlbfs *** [ 0.330315] AppArmor: AppArmor Filesystem Enabled [ 0.330330] pnp: PnP ACPI init [ 0.330564] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.330567] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330774] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.330775] system 00:01: [io 0xffff] has been reserved [ 0.330776] system 00:01: [io 0xffff] has been reserved [ 0.330777] system 00:01: [io 0xffff] has been reserved [ 0.330778] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.330778] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.330780] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330857] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.330859] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330873] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.330900] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.330902] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.331126] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.331127] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.331128] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.331128] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.331129] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.331130] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.331131] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.331132] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.331132] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.331133] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.331135] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.331169] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.331170] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.331170] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.331171] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.331172] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.331173] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.331174] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.331175] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.331176] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.331176] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.331178] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.331447] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.331449] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332549] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.332550] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.332551] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.332553] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.333378] pnp: PnP ACPI: found 9 devices [ 0.334133] thermal_sys: Registered thermal governor 'fair_share' [ 0.334133] thermal_sys: Registered thermal governor 'bang_bang' [ 0.334134] thermal_sys: Registered thermal governor 'step_wise' [ 0.334134] thermal_sys: Registered thermal governor 'user_space' [ 0.334135] thermal_sys: Registered thermal governor 'power_allocator' [ 0.338621] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.338641] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.338643] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.338644] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.338645] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.338645] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.338646] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.338651] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff] [ 0.338653] pci 0000:00:1b.0: BAR 15: assigned [mem 0x2000000000-0x20001fffff 64bit pref] [ 0.338654] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0200000-0xa03fffff] [ 0.338656] pci 0000:00:1c.0: BAR 15: assigned [mem 0x2000200000-0x20003fffff 64bit pref] [ 0.338657] pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.338658] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.338660] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.338661] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.338663] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.338664] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] [ 0.338666] pci 0000:00:1b.0: PCI bridge to [bus 02] [ 0.338669] pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff] [ 0.338672] pci 0000:00:1b.0: bridge window [mem 0xa0000000-0xa01fffff] [ 0.338674] pci 0000:00:1b.0: bridge window [mem 0x2000000000-0x20001fffff 64bit pref] [ 0.338677] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.338678] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.338681] pci 0000:00:1c.0: bridge window [mem 0xa0200000-0xa03fffff] [ 0.338682] pci 0000:00:1c.0: bridge window [mem 0x2000200000-0x20003fffff 64bit pref] [ 0.338686] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.338688] pci 0000:00:1c.4: bridge window [mem 0xdf300000-0xdf3fffff] [ 0.338692] pci 0000:00:1c.6: PCI bridge to [bus 05] [ 0.338695] pci 0000:00:1c.6: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.338698] pci 0000:00:1d.0: PCI bridge to [bus 06] [ 0.338701] pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.338705] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.338706] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.338707] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.338707] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window] [ 0.338708] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x2fffffffff window] [ 0.338709] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window] [ 0.338709] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.338710] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff] [ 0.338711] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref] [ 0.338711] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.338712] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xa01fffff] [ 0.338713] pci_bus 0000:02: resource 2 [mem 0x2000000000-0x20001fffff 64bit pref] [ 0.338713] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.338714] pci_bus 0000:03: resource 1 [mem 0xa0200000-0xa03fffff] [ 0.338715] pci_bus 0000:03: resource 2 [mem 0x2000200000-0x20003fffff 64bit pref] [ 0.338715] pci_bus 0000:04: resource 1 [mem 0xdf300000-0xdf3fffff] [ 0.338716] pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff] [ 0.338717] pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff] [ 0.338853] NET: Registered protocol family 2 [ 0.338960] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.339060] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.339252] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.339308] TCP: Hash tables configured (established 262144 bind 65536) [ 0.339345] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.339401] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.339460] NET: Registered protocol family 1 [ 0.339462] NET: Registered protocol family 44 [ 0.339659] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.339668] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.339671] pci 0000:04:00.0: PME# does not work under D0, disabling it [ 0.339843] pci 0000:05:00.0: PME# does not work under D0, disabling it [ 0.339984] PCI: CLS 64 bytes, default 64 [ 0.340007] Trying to unpack rootfs image as initramfs... [ 0.415979] Initramfs unpacking failed: Decoding failed [ 0.418871] Freeing initrd memory: 49040K [ 0.418911] DMAR: [Firmware Bug]: RMRR entry for device 04:00.0 is broken - applying workaround [ 0.418912] DMAR: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround [ 0.438451] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.438456] software IO TLB: mapped [mem 0x9554c000-0x9954c000] (64MB) [ 0.438647] check: Scanning for low memory corruption every 60 seconds [ 0.438933] Initialise system trusted keyrings [ 0.438947] Key type blacklist registered [ 0.438963] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.439774] zbud: loaded [ 0.440010] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440100] fuse: init (API version 7.31) [ 0.440109] *** VALIDATE fuse *** [ 0.440110] *** VALIDATE fuse *** [ 0.440169] Platform Keyring initialized [ 0.442382] Key type asymmetric registered [ 0.442383] Asymmetric key parser 'x509' registered [ 0.442387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.442413] io scheduler mq-deadline registered [ 0.442923] pcieport 0000:00:1c.4: AER: enabled with IRQ 124 [ 0.443002] pcieport 0000:00:1c.6: AER: enabled with IRQ 125 [ 0.443143] pcieport 0000:00:1d.0: AER: enabled with IRQ 126 [ 0.443184] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.443216] efifb: probing for efifb [ 0.443228] efifb: showing boot graphics [ 0.451530] efifb: framebuffer at 0xd9000000, using 3072k, total 3072k [ 0.451530] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.451531] efifb: scrolling: redraw [ 0.451531] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.451553] fbcon: Deferring console take-over [ 0.451554] fb0: EFI VGA frame buffer device [ 0.451558] intel_idle: MWAIT substates: 0x142120 [ 0.451559] intel_idle: v0.4.1 model 0x9E [ 0.451784] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.451908] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.451921] ACPI: Sleep Button [SLPB] [ 0.451939] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.451947] ACPI: Power Button [PWRB] [ 0.451964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.451982] ACPI: Power Button [PWRF] [ 0.452947] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.473716] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.474835] Linux agpgart interface v0.103 [ 0.476475] loop: module loaded [ 0.476582] libphy: Fixed MDIO Bus: probed [ 0.476583] tun: Universal TUN/TAP device driver, 1.6 [ 0.476597] PPP generic driver version 2.4.2 [ 0.476622] VFIO - User Level meta-driver version: 0.3 [ 0.476656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.476657] ehci-pci: EHCI PCI platform driver [ 0.476662] ehci-platform: EHCI generic platform driver [ 0.476667] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.476668] ohci-pci: OHCI PCI platform driver [ 0.476672] ohci-platform: OHCI generic platform driver [ 0.476676] uhci_hcd: USB Universal Host Controller Interface driver [ 0.476773] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.476777] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.477825] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.477828] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.477948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.477949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.477950] usb usb1: Product: xHCI Host Controller [ 0.477951] usb usb1: Manufacturer: Linux 5.4.0-59-generic xhci-hcd [ 0.477951] usb usb1: SerialNumber: 0000:00:14.0 [ 0.478004] hub 1-0:1.0: USB hub found [ 0.478018] hub 1-0:1.0: 16 ports detected [ 0.479564] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.479566] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.479567] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.479587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.479588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.479588] usb usb2: Product: xHCI Host Controller [ 0.479589] usb usb2: Manufacturer: Linux 5.4.0-59-generic xhci-hcd [ 0.479589] usb usb2: SerialNumber: 0000:00:14.0 [ 0.479670] hub 2-0:1.0: USB hub found [ 0.479680] hub 2-0:1.0: 10 ports detected [ 0.480732] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.480735] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 0.535529] xhci_hcd 0000:04:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010 [ 0.535708] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.535709] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.535710] usb usb3: Product: xHCI Host Controller [ 0.535710] usb usb3: Manufacturer: Linux 5.4.0-59-generic xhci-hcd [ 0.535711] usb usb3: SerialNumber: 0000:04:00.0 [ 0.535791] hub 3-0:1.0: USB hub found [ 0.535796] hub 3-0:1.0: 2 ports detected [ 0.535910] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.535912] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 0.535913] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.535936] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.535947] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.535947] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.535948] usb usb4: Product: xHCI Host Controller [ 0.535948] usb usb4: Manufacturer: Linux 5.4.0-59-generic xhci-hcd [ 0.535949] usb usb4: SerialNumber: 0000:04:00.0 [ 0.536027] hub 4-0:1.0: USB hub found [ 0.536031] hub 4-0:1.0: 2 ports detected [ 0.536175] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 0.536177] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5 [ 0.590971] xhci_hcd 0000:05:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010 [ 0.591141] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.591141] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.591142] usb usb5: Product: xHCI Host Controller [ 0.591143] usb usb5: Manufacturer: Linux 5.4.0-59-generic xhci-hcd [ 0.591143] usb usb5: SerialNumber: 0000:05:00.0 [ 0.591195] hub 5-0:1.0: USB hub found [ 0.591199] hub 5-0:1.0: 2 ports detected [ 0.591315] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 0.591317] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6 [ 0.591319] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.591341] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.591351] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.591352] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.591353] usb usb6: Product: xHCI Host Controller [ 0.591353] usb usb6: Manufacturer: Linux 5.4.0-59-generic xhci-hcd [ 0.591354] usb usb6: SerialNumber: 0000:05:00.0 [ 0.591401] hub 6-0:1.0: USB hub found [ 0.591405] hub 6-0:1.0: 2 ports detected [ 0.591466] usb: port power management may be unreliable [ 0.591511] i8042: PNP: No PS/2 controller found. [ 0.591539] mousedev: PS/2 mouse device common for all mice [ 0.591608] rtc_cmos 00:03: RTC can wake from S4 [ 0.592055] rtc_cmos 00:03: registered as rtc0 [ 0.592063] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.592067] i2c /dev entries driver [ 0.592089] device-mapper: uevent: version 1.0.3 [ 0.592116] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.592128] platform eisa.0: Probing EISA bus 0 [ 0.592129] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.592130] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.592130] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.592131] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.592131] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.592132] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.592132] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.592133] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.592133] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.592134] platform eisa.0: EISA: Detected 0 cards [ 0.592136] intel_pstate: Intel P-state driver initializing [ 0.592486] intel_pstate: HWP enabled [ 0.592566] ledtrig-cpu: registered to indicate activity on CPUs [ 0.592568] EFI Variables Facility v0.08 2004-May-17 [ 0.627173] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff] [ 0.627176] caller pmc_core_probe+0x7f/0x17f mapping multiple BARs [ 0.627184] intel_pmc_core INT33A1:00: initialized [ 0.627224] drop_monitor: Initializing network drop monitor service [ 0.627354] NET: Registered protocol family 10 [ 0.631145] Segment Routing with IPv6 [ 0.631156] NET: Registered protocol family 17 [ 0.631174] Key type dns_resolver registered [ 0.631589] RAS: Correctable Errors collector initialized. [ 0.631633] microcode: sig=0x906e9, pf=0x2, revision=0xde [ 0.631791] microcode: Microcode Update Driver: v2.2. [ 0.631793] IPI shorthand broadcast: enabled [ 0.631797] sched_clock: Marking stable (631306123, 483141)->(663333613, -31544349) [ 0.631922] registered taskstats version 1 [ 0.631927] Loading compiled-in X.509 certificates [ 0.632446] Loaded X.509 cert 'Build time autogenerated kernel key: 3b1b1587024ec1c28fc0d8dc673bb261cd57ce3d' [ 0.632469] zswap: loaded using pool lzo/zbud [ 0.632555] Key type ._fscrypt registered [ 0.632556] Key type .fscrypt registered [ 0.635899] Key type big_key registered [ 0.637471] Key type encrypted registered [ 0.637473] AppArmor: AppArmor sha1 policy hashing enabled [ 0.638618] integrity: Loading X.509 certificate: UEFI:db [ 0.638972] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' [ 0.638973] integrity: Loading X.509 certificate: UEFI:db [ 0.639088] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' [ 0.639089] integrity: Loading X.509 certificate: UEFI:db [ 0.639103] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.639103] integrity: Loading X.509 certificate: UEFI:db [ 0.639117] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.639117] integrity: Loading X.509 certificate: UEFI:db [ 0.639233] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.639965] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.639988] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 0.639988] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.640108] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.641763] ima: No TPM chip found, activating TPM-bypass! [ 0.641767] ima: Allocated hash algorithm: sha1 [ 0.641770] ima: No architecture policies found [ 0.641776] evm: Initialising EVM extended attributes: [ 0.641777] evm: security.selinux [ 0.641777] evm: security.SMACK64 [ 0.641777] evm: security.SMACK64EXEC [ 0.641777] evm: security.SMACK64TRANSMUTE [ 0.641778] evm: security.SMACK64MMAP [ 0.641778] evm: security.apparmor [ 0.641778] evm: security.ima [ 0.641778] evm: security.capability [ 0.641779] evm: HMAC attrs: 0x1 [ 0.642913] PM: Magic number: 5:852:67 [ 0.642955] memory memory228: hash matches [ 0.642965] memory memory95: hash matches [ 0.643106] rtc_cmos 00:03: setting system clock to 2021-01-07T08:03:36 UTC (1610006616) [ 0.643914] Freeing unused decrypted memory: 2040K [ 0.644220] Freeing unused kernel image memory: 2724K [ 0.678586] Write protecting the kernel read-only data: 22528k [ 0.679080] Freeing unused kernel image memory: 2008K [ 0.679260] Freeing unused kernel image memory: 1184K [ 0.685657] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.685658] x86/mm: Checking user space page tables [ 0.691898] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.691899] Run /init as init process [ 0.770172] ahci 0000:00:17.0: version 3.0 [ 0.770357] ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF [ 0.770616] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.770653] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.772984] nvme nvme0: pci function 0000:06:00.0 [ 0.773622] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.773622] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.773777] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.782427] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl RAID mode [ 0.782430] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part ems deso sadm sds apst [ 0.819111] scsi host0: ahci [ 0.819272] scsi host1: ahci [ 0.819531] scsi host2: ahci [ 0.819640] scsi host3: ahci [ 0.819690] ata1: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426100 irq 144 [ 0.819692] ata2: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426180 irq 144 [ 0.819693] ata3: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426200 irq 144 [ 0.819694] ata4: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426280 irq 144 [ 0.826403] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 0.870441] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 0.987203] nvme nvme0: missing or invalid SUBNQN field. [ 0.987230] nvme nvme0: Shutdown timeout set to 8 seconds [ 0.996348] usb 1-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 0.996349] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 0.996349] usb 1-3: Product: CSR8510 A10 [ 0.999343] nvme nvme0: 8/0/0 default/read/poll queues [ 1.004765] nvme0n1: p1 p2 [ 1.040084] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.105145] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=62.05 [ 1.105146] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.105147] usb 3-2: Product: USB2.1 Hub [ 1.105147] usb 3-2: Manufacturer: GenesysLogic [ 1.112075] hub 3-2:1.0: USB hub found [ 1.117131] hub 3-2:1.0: 4 ports detected [ 1.118712] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 2c:4d:54:63:6e:82 [ 1.118713] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.118769] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.122511] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 1.130521] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.133576] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.133577] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.133578] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.133924] ata1.00: supports DRM functions and may not be fully accessible [ 1.135065] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133 [ 1.135066] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.138023] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.138024] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.138025] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.138317] ata1.00: supports DRM functions and may not be fully accessible [ 1.138426] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.138451] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.138463] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.139302] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.139303] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.139304] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.139376] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.139377] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.139378] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.139531] ata4.00: supports DRM functions and may not be fully accessible [ 1.139610] ata3.00: supports DRM functions and may not be fully accessible [ 1.140387] ata4.00: NCQ Send/Recv Log not supported [ 1.140388] ata4.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 1.140389] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.140724] ata3.00: ATA-10: Crucial_CT525MX300SSD1, M0CR031, max UDMA/133 [ 1.140725] ata3.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.141849] ata1.00: configured for UDMA/133 [ 1.141902] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.141904] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.141905] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.141988] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 1.142115] ata4.00: supports DRM functions and may not be fully accessible [ 1.142181] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.142190] ata1.00: Enabling discard_zeroes_data [ 1.142228] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.142235] sd 0:0:0:0: [sda] Write Protect is off [ 1.142236] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.142245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.142511] ata4.00: NCQ Send/Recv Log not supported [ 1.143484] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.143485] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.143486] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.143722] ata3.00: supports DRM functions and may not be fully accessible [ 1.143864] ata4.00: configured for UDMA/133 [ 1.146736] ata3.00: configured for UDMA/133 [ 1.147139] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.150088] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.150089] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.150090] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.166683] ata1.00: Enabling discard_zeroes_data [ 1.168564] sda: sda1 [ 1.168676] ata1.00: Enabling discard_zeroes_data [ 1.170014] sd 0:0:0:0: [sda] supports TCG Opal [ 1.170015] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.179262] ata2.00: ATA-8: ST31000340NS, SN16, max UDMA/133 [ 1.179263] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.204259] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.204261] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.204262] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.211563] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.233411] ata2.00: configured for UDMA/133 [ 1.233579] scsi 1:0:0:0: Direct-Access ATA ST31000340NS SN16 PQ: 0 ANSI: 5 [ 1.233693] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.233856] scsi 2:0:0:0: Direct-Access ATA Crucial_CT525MX3 R031 PQ: 0 ANSI: 5 [ 1.233916] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.233923] sd 1:0:0:0: [sdb] Write Protect is off [ 1.233924] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.233938] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.233980] ata3.00: Enabling discard_zeroes_data [ 1.234029] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.234038] sd 2:0:0:0: [sdc] 1025610768 512-byte logical blocks: (525 GB/489 GiB) [ 1.234044] sd 2:0:0:0: [sdc] Write Protect is off [ 1.234044] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.234056] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.234091] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.234163] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.234195] sd 3:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.234201] sd 3:0:0:0: [sdd] Write Protect is off [ 1.234202] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.234212] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.248640] usb 4-2: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice=62.05 [ 1.248641] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.248642] usb 4-2: Product: USB3.1 Hub [ 1.248654] usb 4-2: Manufacturer: GenesysLogic [ 1.256305] hub 4-2:1.0: USB hub found [ 1.258558] ata3.00: Enabling discard_zeroes_data [ 1.258559] hub 4-2:1.0: 4 ports detected [ 1.258961] sdd: sdd1 [ 1.259753] sd 3:0:0:0: [sdd] supports TCG Opal [ 1.259754] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.260013] sdc: sdc1 [ 1.260192] ata3.00: Enabling discard_zeroes_data [ 1.260471] sd 2:0:0:0: [sdc] supports TCG Opal [ 1.260472] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.270867] sdb: sdb1 [ 1.270990] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 1.270991] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.270992] usb 1-6: Product: USB2.0 Hub [ 1.270992] usb 1-6: Manufacturer: GenesysLogic [ 1.271496] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.272052] hub 1-6:1.0: USB hub found [ 1.272587] hub 1-6:1.0: 4 ports detected [ 1.402501] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 1.446525] tsc: Refined TSC clocksource calibration: 3600.000 MHz [ 1.446528] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns [ 1.446569] clocksource: Switched to clocksource tsc [ 1.490500] usb 3-2.4: new high-speed USB device number 3 using xhci_hcd [ 1.553683] usb 1-8: New USB device found, idVendor=03f0, idProduct=b402, bcdDevice= 1.00 [ 1.553684] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.553697] usb 1-8: Product: photosmart 7700 series [ 1.553698] usb 1-8: Manufacturer: hp [ 1.553698] usb 1-8: SerialNumber: MY3C6220WFP9 [ 1.630503] usb 1-6.4: new high-speed USB device number 5 using xhci_hcd [ 1.671157] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=62.05 [ 1.671158] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.671159] usb 3-2.4: Product: USB2.1 Hub [ 1.671159] usb 3-2.4: Manufacturer: GenesysLogic [ 1.679187] hub 3-2.4:1.0: USB hub found [ 1.684157] hub 3-2.4:1.0: 4 ports detected [ 1.731624] usb 4-2.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 1.735309] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 1.735310] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.735311] usb 1-6.4: Product: USB2.0 Hub [ 1.735311] usb 1-6.4: Manufacturer: GenesysLogic [ 1.736594] hub 1-6.4:1.0: USB hub found [ 1.737146] hub 1-6.4:1.0: 4 ports detected [ 1.768137] usb 4-2.4: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice=62.05 [ 1.768138] usb 4-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.768151] usb 4-2.4: Product: USB3.1 Hub [ 1.768152] usb 4-2.4: Manufacturer: GenesysLogic [ 1.776434] hub 4-2.4:1.0: USB hub found [ 1.778664] hub 4-2.4:1.0: 4 ports detected [ 1.858500] usb 1-10: new full-speed USB device number 6 using xhci_hcd [ 2.009113] usb 1-10: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00 [ 2.009114] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.009115] usb 1-10: Product: USB Receiver [ 2.009128] usb 1-10: Manufacturer: Logitech [ 2.014266] hidraw: raw HID events driver (C) Jiri Kosina [ 2.014956] usb-storage 1-8:1.2: USB Mass Storage device detected [ 2.015016] scsi host4: usb-storage 1-8:1.2 [ 2.015066] usbcore: registered new interface driver usb-storage [ 2.015804] usbcore: registered new interface driver uas [ 2.017669] usbcore: registered new interface driver usbhid [ 2.017669] usbhid: USB HID core driver [ 2.019277] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C52E.0001/input/input3 [ 2.078694] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10/input0 [ 2.078832] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52E.0002/input/input4 [ 2.078969] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52E.0002/input/input5 [ 2.086441] usb 1-6.4.4: new high-speed USB device number 7 using xhci_hcd [ 2.138635] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52E.0002/input/input6 [ 2.138695] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10/input1 [ 2.191062] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 2.191062] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 2.191063] usb 1-6.4.4: Product: USB Storage [ 2.191064] usb 1-6.4.4: Manufacturer: Generic [ 2.191064] usb 1-6.4.4: SerialNumber: 000000000250 [ 2.192991] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 2.193295] scsi host5: usb-storage 1-6.4.4:1.0 [ 2.233824] fbcon: Taking over console [ 2.233851] Console: switching to colour frame buffer device 128x48 [ 2.239885] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.533673] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro [ 2.535594] lp: driver loaded but no devices found [ 2.544307] ppdev: user-space parallel port driver [ 2.645494] systemd-journald[324]: Received client request to flush runtime journal. [ 2.670546] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 2.869786] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.052936] scsi 4:0:0:0: Direct-Access HP photosmart 7700 1.00 PQ: 0 ANSI: 2 [ 3.053078] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.064635] asus_wmi: ASUS WMI generic driver loaded [ 3.067010] Bluetooth: Core ver 2.22 [ 3.067019] NET: Registered protocol family 31 [ 3.067020] Bluetooth: HCI device and connection manager initialized [ 3.067023] Bluetooth: HCI socket layer initialized [ 3.067024] Bluetooth: L2CAP socket layer initialized [ 3.067026] Bluetooth: SCO socket layer initialized [ 3.067704] asus_wmi: Initialization: 0x0 [ 3.067739] asus_wmi: BIOS WMI version: 0.9 [ 3.067807] asus_wmi: SFUN value: 0x0 [ 3.067809] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 3.068793] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 3.073325] usbcore: registered new interface driver btusb [ 3.131376] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 3.131378] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.131379] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.131380] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.131381] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 3.131382] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.131383] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 3.131384] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 3.131385] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 3.144007] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 3.144055] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 3.144100] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 3.144144] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 3.144188] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 3.144235] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 3.144281] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 3.149088] usblp 1-8:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB402 [ 3.149111] usbcore: registered new interface driver usblp [ 3.215790] nvidia: loading out-of-tree module taints kernel. [ 3.215798] nvidia: module license 'NVIDIA' taints kernel. [ 3.215799] Disabling lock debugging due to kernel taint [ 3.219686] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 3.219846] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 3.221945] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3.226140] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 3.226141] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.226142] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.226142] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.228826] nvidia-nvlink: Nvlink Core is being initialized, major device number 234 [ 3.232678] cryptd: max_cpu_qlen set to 1000 [ 3.248228] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 3.266950] sd 4:0:0:0: [sde] Attached SCSI removable disk [ 3.278693] AVX2 version of gcm_enc/dec engaged. [ 3.278694] AES CTR mode by8 optimization enabled [ 3.376393] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 3.461564] intel_rapl_common: Found RAPL domain package [ 3.461565] intel_rapl_common: Found RAPL domain core [ 3.461566] intel_rapl_common: Found RAPL domain dram [ 4.262733] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 4.262778] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.262781] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.378436] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 455.45.01 Thu Nov 5 23:03:56 UTC 2020 [ 4.391893] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 455.45.01 Thu Nov 5 22:55:44 UTC 2020 [ 4.393774] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 4.393776] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 4.408010] nvidia-uvm: Loaded the UVM driver, major device number 510. [ 4.542193] audit: type=1400 audit(1610006620.391:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=903 comm="apparmor_parser" [ 4.542196] audit: type=1400 audit(1610006620.391:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=903 comm="apparmor_parser" [ 4.542546] audit: type=1400 audit(1610006620.395:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=908 comm="apparmor_parser" [ 4.542549] audit: type=1400 audit(1610006620.395:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=908 comm="apparmor_parser" [ 4.543084] audit: type=1400 audit(1610006620.395:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=907 comm="apparmor_parser" [ 4.544473] audit: type=1400 audit(1610006620.395:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=912 comm="apparmor_parser" [ 4.544475] audit: type=1400 audit(1610006620.395:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=912 comm="apparmor_parser" [ 4.544476] audit: type=1400 audit(1610006620.395:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=912 comm="apparmor_parser" [ 4.544835] audit: type=1400 audit(1610006620.395:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=913 comm="apparmor_parser" [ 4.831009] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.831010] Bluetooth: BNEP filters: protocol multicast [ 4.831013] Bluetooth: BNEP socket layer initialized [ 4.840380] NET: Registered protocol family 38 [ 4.940765] ata1.00: supports DRM functions and may not be fully accessible [ 4.943881] ata1.00: supports DRM functions and may not be fully accessible [ 4.946634] ata1.00: Enabling discard_zeroes_data [ 4.946699] ata1.00: Enabling discard_zeroes_data [ 4.947836] sda: sda1 [ 5.046728] ata3.00: supports DRM functions and may not be fully accessible [ 5.049509] ata3.00: supports DRM functions and may not be fully accessible [ 5.052283] ata3.00: Enabling discard_zeroes_data [ 5.053308] sdc: sdc1 [ 5.054539] ata3.00: Enabling discard_zeroes_data [ 5.082912] ata4.00: supports DRM functions and may not be fully accessible [ 5.083274] ata4.00: NCQ Send/Recv Log not supported [ 5.084244] ata4.00: supports DRM functions and may not be fully accessible [ 5.087553] ata4.00: NCQ Send/Recv Log not supported [ 5.089427] sdd: sdd1 [ 5.183878] kauditd_printk_skb: 47 callbacks suppressed [ 5.183879] audit: type=1400 audit(1610006621.035:58): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1106 comm="cups-browsed" capability=23 capname="sys_nice" [ 6.044904] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 6.045193] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 6.048024] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 6.048112] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 6.048175] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 6.048241] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 [ 6.048315] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 [ 7.828540] rfkill: input handler disabled [ 9.817148] usblp1: removed [ 9.820239] usblp 1-8:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB402 [ 10.150892] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 10.150965] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 17.498945] usb 1-6: USB disconnect, device number 3 [ 17.498946] usb 1-6.4: USB disconnect, device number 5 [ 17.498948] usb 1-6.4.4: USB disconnect, device number 7 [ 17.854477] usb 1-6: new high-speed USB device number 8 using xhci_hcd [ 18.006900] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 18.006905] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.006909] usb 1-6: Product: USB2.0 Hub [ 18.006911] usb 1-6: Manufacturer: GenesysLogic [ 18.008171] hub 1-6:1.0: USB hub found [ 18.008547] hub 1-6:1.0: 4 ports detected [ 18.298478] usb 1-6.4: new high-speed USB device number 9 using xhci_hcd [ 18.403400] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 18.403406] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.403409] usb 1-6.4: Product: USB2.0 Hub [ 18.403412] usb 1-6.4: Manufacturer: GenesysLogic [ 18.404831] hub 1-6.4:1.0: USB hub found [ 18.405295] hub 1-6.4:1.0: 4 ports detected [ 18.694529] usb 1-6.4.4: new high-speed USB device number 10 using xhci_hcd [ 18.799076] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 18.799082] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 18.799085] usb 1-6.4.4: Product: USB Storage [ 18.799088] usb 1-6.4.4: Manufacturer: Generic [ 18.799090] usb 1-6.4.4: SerialNumber: 000000000250 [ 18.801029] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 18.801349] scsi host5: usb-storage 1-6.4.4:1.0 [ 19.815733] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 19.816408] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 19.834969] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 25.436060] Bluetooth: RFCOMM TTY layer initialized [ 25.436063] Bluetooth: RFCOMM socket layer initialized [ 25.436066] Bluetooth: RFCOMM ver 1.11 [ 27.147506] rfkill: input handler enabled [ 29.081975] rfkill: input handler disabled [ 178.976215] usb 1-6: USB disconnect, device number 8 [ 178.976221] usb 1-6.4: USB disconnect, device number 9 [ 178.976224] usb 1-6.4.4: USB disconnect, device number 10 [ 179.338991] usb 1-6: new high-speed USB device number 11 using xhci_hcd [ 179.491385] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 179.491390] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 179.491393] usb 1-6: Product: USB2.0 Hub [ 179.491396] usb 1-6: Manufacturer: GenesysLogic [ 179.492620] hub 1-6:1.0: USB hub found [ 179.493000] hub 1-6:1.0: 4 ports detected [ 179.782999] usb 1-6.4: new high-speed USB device number 12 using xhci_hcd [ 179.887706] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 179.887712] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 179.887715] usb 1-6.4: Product: USB2.0 Hub [ 179.887718] usb 1-6.4: Manufacturer: GenesysLogic [ 179.889061] hub 1-6.4:1.0: USB hub found [ 179.889530] hub 1-6.4:1.0: 4 ports detected [ 180.178991] usb 1-6.4.4: new high-speed USB device number 13 using xhci_hcd [ 180.283551] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 180.283556] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 180.283560] usb 1-6.4.4: Product: USB Storage [ 180.283562] usb 1-6.4.4: Manufacturer: Generic [ 180.283565] usb 1-6.4.4: SerialNumber: 000000000250 [ 180.285408] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 180.285677] scsi host5: usb-storage 1-6.4.4:1.0 [ 181.288492] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 181.289222] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 181.312181] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 196.529803] audit: type=1400 audit(1610006811.701:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/10583/usr/lib/snapd/snap-confine" pid=6149 comm="apparmor_parser" [ 196.529939] audit: type=1400 audit(1610006811.701:60): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/10583/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6149 comm="apparmor_parser" [ 196.698295] audit: type=1400 audit(1610006811.869:61): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.okular" pid=6155 comm="apparmor_parser" [ 196.750458] audit: type=1400 audit(1610006811.921:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=6151 comm="apparmor_parser" [ 197.094266] audit: type=1400 audit(1610006812.265:63): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.filezilla" pid=6152 comm="apparmor_parser" [ 197.179608] audit: type=1400 audit(1610006812.353:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gimp" pid=6153 comm="apparmor_parser" [ 197.270548] audit: type=1400 audit(1610006812.441:65): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=6154 comm="apparmor_parser" [ 197.272949] audit: type=1400 audit(1610006812.445:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.xournalpp" pid=6157 comm="apparmor_parser" [ 197.291932] audit: type=1400 audit(1610006812.465:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.snap-store" pid=6156 comm="apparmor_parser" [ 197.295665] audit: type=1400 audit(1610006812.469:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=6159 comm="apparmor_parser" [ 221.838328] usb 1-6: USB disconnect, device number 11 [ 221.838333] usb 1-6.4: USB disconnect, device number 12 [ 221.838336] usb 1-6.4.4: USB disconnect, device number 13 [ 222.211418] usb 1-6: new high-speed USB device number 14 using xhci_hcd [ 222.363966] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 222.363972] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 222.363975] usb 1-6: Product: USB2.0 Hub [ 222.363978] usb 1-6: Manufacturer: GenesysLogic [ 222.365203] hub 1-6:1.0: USB hub found [ 222.365627] hub 1-6:1.0: 4 ports detected [ 222.655423] usb 1-6.4: new high-speed USB device number 15 using xhci_hcd [ 222.760248] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 222.760253] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 222.760257] usb 1-6.4: Product: USB2.0 Hub [ 222.760260] usb 1-6.4: Manufacturer: GenesysLogic [ 222.761634] hub 1-6.4:1.0: USB hub found [ 222.762049] hub 1-6.4:1.0: 4 ports detected [ 223.051425] usb 1-6.4.4: new high-speed USB device number 16 using xhci_hcd [ 223.156034] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 223.156039] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 223.156042] usb 1-6.4.4: Product: USB Storage [ 223.156045] usb 1-6.4.4: Manufacturer: Generic [ 223.156048] usb 1-6.4.4: SerialNumber: 000000000250 [ 223.158103] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 223.158544] scsi host5: usb-storage 1-6.4.4:1.0 [ 224.168388] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 224.168672] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 224.192062] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 4442.088197] usb 1-6: USB disconnect, device number 14 [ 4442.088203] usb 1-6.4: USB disconnect, device number 15 [ 4442.088206] usb 1-6.4.4: USB disconnect, device number 16 [ 4442.425600] usb 1-6: new high-speed USB device number 17 using xhci_hcd [ 4442.578002] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 4442.578007] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4442.578010] usb 1-6: Product: USB2.0 Hub [ 4442.578013] usb 1-6: Manufacturer: GenesysLogic [ 4442.579248] hub 1-6:1.0: USB hub found [ 4442.579663] hub 1-6:1.0: 4 ports detected [ 4442.869545] usb 1-6.4: new high-speed USB device number 18 using xhci_hcd [ 4442.978282] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 4442.978284] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4442.978284] usb 1-6.4: Product: USB2.0 Hub [ 4442.978285] usb 1-6.4: Manufacturer: GenesysLogic [ 4442.979153] hub 1-6.4:1.0: USB hub found [ 4442.979738] hub 1-6.4:1.0: 4 ports detected [ 4443.269566] usb 1-6.4.4: new high-speed USB device number 19 using xhci_hcd [ 4443.374158] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 4443.374164] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 4443.374167] usb 1-6.4.4: Product: USB Storage [ 4443.374170] usb 1-6.4.4: Manufacturer: Generic [ 4443.374172] usb 1-6.4.4: SerialNumber: 000000000250 [ 4443.376389] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 4443.376889] scsi host5: usb-storage 1-6.4.4:1.0 [ 4444.406907] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 4444.407572] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 4444.426721] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 7753.484192] usb 1-6: USB disconnect, device number 17 [ 7753.484198] usb 1-6.4: USB disconnect, device number 18 [ 7753.484201] usb 1-6.4.4: USB disconnect, device number 19 [ 7753.843734] usb 1-6: new high-speed USB device number 20 using xhci_hcd [ 7753.996333] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 7753.996338] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7753.996341] usb 1-6: Product: USB2.0 Hub [ 7753.996344] usb 1-6: Manufacturer: GenesysLogic [ 7753.997596] hub 1-6:1.0: USB hub found [ 7753.997995] hub 1-6:1.0: 4 ports detected [ 7754.291708] usb 1-6.4: new high-speed USB device number 21 using xhci_hcd [ 7754.396473] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 7754.396478] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7754.396481] usb 1-6.4: Product: USB2.0 Hub [ 7754.396484] usb 1-6.4: Manufacturer: GenesysLogic [ 7754.397857] hub 1-6.4:1.0: USB hub found [ 7754.398270] hub 1-6.4:1.0: 4 ports detected [ 7754.687696] usb 1-6.4.4: new high-speed USB device number 22 using xhci_hcd [ 7754.792278] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 7754.792283] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 7754.792286] usb 1-6.4.4: Product: USB Storage [ 7754.792289] usb 1-6.4.4: Manufacturer: Generic [ 7754.792292] usb 1-6.4.4: SerialNumber: 000000000250 [ 7754.794273] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 7754.794754] scsi host5: usb-storage 1-6.4.4:1.0 [ 7755.808989] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 7755.810595] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 7755.844481] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 8401.176195] usb 1-6: USB disconnect, device number 20 [ 8401.176200] usb 1-6.4: USB disconnect, device number 21 [ 8401.176203] usb 1-6.4.4: USB disconnect, device number 22 [ 8401.527531] usb 1-6: new high-speed USB device number 23 using xhci_hcd [ 8401.679813] usb 1-6: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 8401.679819] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8401.679822] usb 1-6: Product: USB2.0 Hub [ 8401.679825] usb 1-6: Manufacturer: GenesysLogic [ 8401.681082] hub 1-6:1.0: USB hub found [ 8401.681444] hub 1-6:1.0: 4 ports detected [ 8401.975523] usb 1-6.4: new high-speed USB device number 24 using xhci_hcd [ 8402.080239] usb 1-6.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.16 [ 8402.080245] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8402.080248] usb 1-6.4: Product: USB2.0 Hub [ 8402.080251] usb 1-6.4: Manufacturer: GenesysLogic [ 8402.081575] hub 1-6.4:1.0: USB hub found [ 8402.082037] hub 1-6.4:1.0: 4 ports detected [ 8402.371496] usb 1-6.4.4: new high-speed USB device number 25 using xhci_hcd [ 8402.476103] usb 1-6.4.4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.50 [ 8402.476108] usb 1-6.4.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 8402.476111] usb 1-6.4.4: Product: USB Storage [ 8402.476114] usb 1-6.4.4: Manufacturer: Generic [ 8402.476117] usb 1-6.4.4: SerialNumber: 000000000250 [ 8402.478101] usb-storage 1-6.4.4:1.0: USB Mass Storage device detected [ 8402.478642] scsi host5: usb-storage 1-6.4.4:1.0 [ 8403.498036] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0 [ 8403.498675] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 8403.512937] sd 5:0:0:0: [sdf] Attached SCSI removable disk [26570.109841] kauditd_printk_skb: 46 callbacks suppressed [26570.109842] audit: type=1400 audit(1610033186.181:115): apparmor="DENIED" operation="capable" profile="/snap/core/10583/usr/lib/snapd/snap-confine" pid=36203 comm="snap-confine" capability=4 capname="fsetid" [26571.857296] audit: type=1400 audit(1610033187.925:116): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/run/mount/utab" pid=36203 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0