[111320.083939] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[111320.100275] [drm] ring test on 0 succeeded in 1 usecs
[111320.100330] [drm] ring test on 3 succeeded in 1 usecs
[111320.100356] [drm] ib test on ring 0 succeeded in 0 usecs
[111320.100380] [drm] ib test on ring 3 succeeded in 1 usecs
[111320.225380] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[111320.225387] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[111320.225417] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[111320.241224] ata5.00: configured for UDMA/33
[111320.268686] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[111320.528124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[111320.536221] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[111320.564951] ata1.00: configured for UDMA/133
[111320.565077] sd 0:0:0:0: [sda] Starting disk
[111320.583943] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[111320.622324] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[111320.622329] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[111320.793732] ata3: SATA link down (SStatus 0 SControl 300)
[111320.793734] ata2: SATA link down (SStatus 0 SControl 300)
[111320.803977] ata4: SATA link down (SStatus 0 SControl 300)
[111320.808632] PM: resume of devices complete after 748.851 msecs
[111320.808763] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input19
[111321.809303] 4:3:2: cannot set freq 24000 to ep 0x86
[111321.965972] set resolution quirk: cval->res = 384
[111321.973197] Restarting tasks ... done.
[111322.259539] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[111322.259603] forcedeth 0000:00:07.0 eth0: MSI enabled
[114916.072149] PM: Syncing filesystems ... done.
[114916.315665] Freezing user space processes ... (elapsed 0.01 seconds) done.
[114916.330203] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[114916.346177] Suspending console(s) (use no_console_suspend to debug)
[114916.346788] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[114916.346960] sd 0:0:0:0: [sda] Stopping disk
[114916.349662] serial 00:07: disabled
[114916.349666] serial 00:07: System wakeup disabled by ACPI
[114916.349771] parport_pc 00:04: disabled
[114916.797067] PM: suspend of devices complete after 451.770 msecs
[114916.797327] PM: late suspend of devices complete after 0.257 msecs
[114916.812958] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[114916.828895] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[114916.844970] PM: noirq suspend of devices complete after 47.745 msecs
[114916.846256] ACPI: Preparing to enter system sleep state S3
[114917.244399] PM: Saving platform NVS memory
[114917.244690] Disabling non-boot CPUs ...
[114917.246089] smpboot: CPU 1 is now offline
[114917.246695] Broke affinity for irq 23
[114917.247706] smpboot: CPU 2 is now offline
[114917.248328] Broke affinity for irq 21
[114917.351656] smpboot: CPU 3 is now offline
[114917.353802] ACPI: Low-level resume complete
[114917.353866] PM: Restoring platform NVS memory
[114917.353942] PCI-DMA: Resuming GART IOMMU
[114917.353942] PCI-DMA: Restoring GART aperture settings
[114917.354771] LVT offset 0 assigned for vector 0xf9
[114917.354777] microcode: CPU0: new patch_level=0x010000dc
[114917.354799] Enabling non-boot CPUs ...
[114917.354860] smpboot: Booting Node 0 Processor 1 APIC 0x1
[114917.365784] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[114917.365785] perf: IBS APIC setup failed on cpu #1
[114917.368088] microcode: CPU1: new patch_level=0x010000dc
[114917.368091] CPU1 is up
[114917.368152] smpboot: Booting Node 0 Processor 2 APIC 0x2
[114917.379077] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[114917.379078] perf: IBS APIC setup failed on cpu #2
[114917.381395] microcode: CPU2: new patch_level=0x010000dc
[114917.381398] CPU2 is up
[114917.381483] smpboot: Booting Node 0 Processor 3 APIC 0x3
[114917.392405] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[114917.392407] perf: IBS APIC setup failed on cpu #3
[114917.394673] microcode: CPU3: new patch_level=0x010000dc
[114917.394675] CPU3 is up
[114917.399878] ACPI: Waking up from system sleep state S3
[114917.413691] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[114917.429656] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[114917.429739] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.445659] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.477593] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.493558] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.509521] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.509639] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.509708] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.509779] pci 0000:00:00.0: Found enabled HT MSI Mapping
[114917.541558] PM: noirq resume of devices complete after 141.537 msecs
[114917.541708] PM: early resume of devices complete after 0.101 msecs
[114917.541856] pci 0000:00:04.0: setting latency timer to 64
[114917.541871] pata_amd 0000:00:06.0: setting latency timer to 64
[114917.541878] ehci-pci 0000:00:02.1: setting latency timer to 64
[114917.541941] ohci_hcd 0000:00:02.0: setting latency timer to 64
[114917.542106] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[114917.542577] sata_nv 0000:00:08.0: setting latency timer to 64
[114917.542594] sata_nv 0000:00:08.1: setting latency timer to 64
[114917.542643] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[114917.543251] parport_pc 00:04: activated
[114917.543852] serial 00:07: activated
[114917.545373] ata6: port disabled--ignoring
[114917.561754] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[114917.564133] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[114917.564248] radeon 0000:02:00.0: WB enabled
[114917.564250] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[114917.564252] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[114917.580222] [drm] ring test on 0 succeeded in 1 usecs
[114917.580278] [drm] ring test on 3 succeeded in 1 usecs
[114917.580304] [drm] ib test on ring 0 succeeded in 0 usecs
[114917.580328] [drm] ib test on ring 3 succeeded in 1 usecs
[114917.705612] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[114917.705619] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[114917.705649] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[114917.721526] ata5.00: configured for UDMA/33
[114917.748913] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[114918.008334] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[114918.016454] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[114918.052492] ata1.00: configured for UDMA/133
[114918.052528] sd 0:0:0:0: [sda] Starting disk
[114918.064196] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[114918.102578] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[114918.102583] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[114918.273955] ata3: SATA link down (SStatus 0 SControl 300)
[114918.273960] ata2: SATA link down (SStatus 0 SControl 300)
[114918.284237] ata4: SATA link down (SStatus 0 SControl 300)
[114918.284380] PM: resume of devices complete after 744.378 msecs
[114918.284465] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input20
[114919.281558] 4:3:1: cannot get freq at ep 0x86
[114919.444351] set resolution quirk: cval->res = 384
[114919.449901] Restarting tasks ... done.
[114919.749483] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[114919.749543] forcedeth 0000:00:07.0 eth0: MSI enabled
[118513.164037] PM: Syncing filesystems ... done.
[118513.489099] Freezing user space processes ... (elapsed 0.01 seconds) done.
[118513.504195] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[118513.520178] Suspending console(s) (use no_console_suspend to debug)
[118513.520710] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[118513.520982] sd 0:0:0:0: [sda] Stopping disk
[118513.523570] serial 00:07: disabled
[118513.523574] serial 00:07: System wakeup disabled by ACPI
[118513.523666] parport_pc 00:04: disabled
[118513.971005] PM: suspend of devices complete after 451.717 msecs
[118513.971289] PM: late suspend of devices complete after 0.280 msecs
[118513.986956] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[118514.002892] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[118514.018969] PM: noirq suspend of devices complete after 47.782 msecs
[118514.020258] ACPI: Preparing to enter system sleep state S3
[118514.418415] PM: Saving platform NVS memory
[118514.418705] Disabling non-boot CPUs ...
[118514.521673] smpboot: CPU 1 is now offline
[118514.522409] Broke affinity for irq 23
[118514.625422] smpboot: CPU 2 is now offline
[118514.626052] Broke affinity for irq 21
[118514.627073] smpboot: CPU 3 is now offline
[118514.629059] ACPI: Low-level resume complete
[118514.629123] PM: Restoring platform NVS memory
[118514.629201] PCI-DMA: Resuming GART IOMMU
[118514.629201] PCI-DMA: Restoring GART aperture settings
[118514.630031] LVT offset 0 assigned for vector 0xf9
[118514.630036] microcode: CPU0: new patch_level=0x010000dc
[118514.630059] Enabling non-boot CPUs ...
[118514.630118] smpboot: Booting Node 0 Processor 1 APIC 0x1
[118514.641042] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[118514.641043] perf: IBS APIC setup failed on cpu #1
[118514.643342] microcode: CPU1: new patch_level=0x010000dc
[118514.643345] CPU1 is up
[118514.643396] smpboot: Booting Node 0 Processor 2 APIC 0x2
[118514.654320] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[118514.654321] perf: IBS APIC setup failed on cpu #2
[118514.656581] microcode: CPU2: new patch_level=0x010000dc
[118514.656584] CPU2 is up
[118514.656659] smpboot: Booting Node 0 Processor 3 APIC 0x3
[118514.667583] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[118514.667585] perf: IBS APIC setup failed on cpu #3
[118514.669812] microcode: CPU3: new patch_level=0x010000dc
[118514.669814] CPU3 is up
[118514.675046] ACPI: Waking up from system sleep state S3
[118514.691449] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[118514.707409] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[118514.707492] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.723413] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.755356] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.771320] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.787284] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.787399] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.787467] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.787538] pci 0000:00:00.0: Found enabled HT MSI Mapping
[118514.819316] PM: noirq resume of devices complete after 144.134 msecs
[118514.819467] PM: early resume of devices complete after 0.103 msecs
[118514.819611] ohci_hcd 0000:00:02.0: setting latency timer to 64
[118514.819616] pci 0000:00:04.0: setting latency timer to 64
[118514.819625] ehci-pci 0000:00:02.1: setting latency timer to 64
[118514.819636] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[118514.819670] pata_amd 0000:00:06.0: setting latency timer to 64
[118514.819827] sata_nv 0000:00:08.0: setting latency timer to 64
[118514.819846] sata_nv 0000:00:08.1: setting latency timer to 64
[118514.819929] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[118514.820954] parport_pc 00:04: activated
[118514.822375] serial 00:07: activated
[118514.822962] ata6: port disabled--ignoring
[118514.839492] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[118514.841876] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[118514.841989] radeon 0000:02:00.0: WB enabled
[118514.841991] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[118514.841992] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[118514.858315] [drm] ring test on 0 succeeded in 1 usecs
[118514.858371] [drm] ring test on 3 succeeded in 1 usecs
[118514.858396] [drm] ib test on ring 0 succeeded in 0 usecs
[118514.858421] [drm] ib test on ring 3 succeeded in 1 usecs
[118514.983322] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[118514.983324] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[118514.983336] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[118514.999323] ata5.00: configured for UDMA/33
[118515.026668] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[118515.286142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[118515.294209] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[118515.330854] ata1.00: configured for UDMA/133
[118515.330976] sd 0:0:0:0: [sda] Starting disk
[118515.341883] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[118515.380236] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[118515.380241] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[118515.551701] ata2: SATA link down (SStatus 0 SControl 300)
[118515.551717] ata3: SATA link down (SStatus 0 SControl 300)
[118515.562001] ata4: SATA link down (SStatus 0 SControl 300)
[118515.562142] PM: resume of devices complete after 744.382 msecs
[118515.562232] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input21
[118516.559349] 4:3:1: cannot set freq 16000 to ep 0x86
[118516.722264] set resolution quirk: cval->res = 384
[118516.729213] Restarting tasks ... done.
[118516.991539] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[118516.991601] forcedeth 0000:00:07.0 eth0: MSI enabled
[122110.705795] PM: Syncing filesystems ... done.
[122111.019115] Freezing user space processes ... (elapsed 0.01 seconds) done.
[122111.034194] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[122111.050179] Suspending console(s) (use no_console_suspend to debug)
[122111.050722] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[122111.050982] sd 0:0:0:0: [sda] Stopping disk
[122111.053539] serial 00:07: disabled
[122111.053543] serial 00:07: System wakeup disabled by ACPI
[122111.053635] parport_pc 00:04: disabled
[122111.501040] PM: suspend of devices complete after 451.739 msecs
[122111.501310] PM: late suspend of devices complete after 0.267 msecs
[122111.516961] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[122111.532898] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[122111.548972] PM: noirq suspend of devices complete after 47.765 msecs
[122111.550264] ACPI: Preparing to enter system sleep state S3
[122111.948401] PM: Saving platform NVS memory
[122111.948698] Disabling non-boot CPUs ...
[122111.949096] Broke affinity for irq 21
[122111.950110] smpboot: CPU 1 is now offline
[122111.950759] Broke affinity for irq 23
[122111.951769] smpboot: CPU 2 is now offline
[122111.953474] smpboot: CPU 3 is now offline
[122111.955457] ACPI: Low-level resume complete
[122111.955521] PM: Restoring platform NVS memory
[122111.955600] PCI-DMA: Resuming GART IOMMU
[122111.955601] PCI-DMA: Restoring GART aperture settings
[122111.956432] LVT offset 0 assigned for vector 0xf9
[122111.956438] microcode: CPU0: new patch_level=0x010000dc
[122111.956446] Enabling non-boot CPUs ...
[122111.956519] smpboot: Booting Node 0 Processor 1 APIC 0x1
[122111.967442] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[122111.967443] perf: IBS APIC setup failed on cpu #1
[122111.969742] microcode: CPU1: new patch_level=0x010000dc
[122111.969744] CPU1 is up
[122111.969815] smpboot: Booting Node 0 Processor 2 APIC 0x2
[122111.980739] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[122111.980740] perf: IBS APIC setup failed on cpu #2
[122111.982999] microcode: CPU2: new patch_level=0x010000dc
[122111.983002] CPU2 is up
[122111.983073] smpboot: Booting Node 0 Processor 3 APIC 0x3
[122111.993998] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[122111.994000] perf: IBS APIC setup failed on cpu #3
[122111.996227] microcode: CPU3: new patch_level=0x010000dc
[122111.996228] CPU3 is up
[122112.001467] ACPI: Waking up from system sleep state S3
[122112.017935] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[122112.033897] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[122112.033978] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.049900] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.081834] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.097800] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.113762] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.113880] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.113948] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.114019] pci 0000:00:00.0: Found enabled HT MSI Mapping
[122112.145821] PM: noirq resume of devices complete after 144.223 msecs
[122112.145965] PM: early resume of devices complete after 0.103 msecs
[122112.146050] ohci_hcd 0000:00:02.0: setting latency timer to 64
[122112.146100] ehci-pci 0000:00:02.1: setting latency timer to 64
[122112.146115] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[122112.146120] pci 0000:00:04.0: setting latency timer to 64
[122112.146142] pata_amd 0000:00:06.0: setting latency timer to 64
[122112.146264] sata_nv 0000:00:08.0: setting latency timer to 64
[122112.146268] sata_nv 0000:00:08.1: setting latency timer to 64
[122112.146411] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[122112.147356] parport_pc 00:04: activated
[122112.148504] serial 00:07: activated
[122112.149089] ata6: port disabled--ignoring
[122112.165990] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[122112.168357] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[122112.168456] radeon 0000:02:00.0: WB enabled
[122112.168458] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[122112.168460] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[122112.184425] [drm] ring test on 0 succeeded in 1 usecs
[122112.184481] [drm] ring test on 3 succeeded in 1 usecs
[122112.184507] [drm] ib test on ring 0 succeeded in 0 usecs
[122112.184531] [drm] ib test on ring 3 succeeded in 1 usecs
[122112.309850] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[122112.309857] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[122112.309887] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[122112.325723] ata5.00: configured for UDMA/33
[122112.353167] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[122112.612598] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[122112.620692] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[122112.653038] ata1.00: configured for UDMA/133
[122112.653137] sd 0:0:0:0: [sda] Starting disk
[122112.668383] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[122112.706551] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[122112.706556] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[122112.878196] ata2: SATA link down (SStatus 0 SControl 300)
[122112.878202] ata3: SATA link down (SStatus 0 SControl 300)
[122112.888452] ata4: SATA link down (SStatus 0 SControl 300)
[122112.896089] PM: resume of devices complete after 751.844 msecs
[122112.896222] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input22
[122113.893774] 4:3:1: cannot set freq 16000 to ep 0x86
[122114.056181] set resolution quirk: cval->res = 384
[122114.063074] Restarting tasks ... done.
[122114.443701] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[122114.443763] forcedeth 0000:00:07.0 eth0: MSI enabled
[125707.707516] PM: Syncing filesystems ... done.
[125708.047853] Freezing user space processes ... (elapsed 0.01 seconds) done.
[125708.063097] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[125708.079069] Suspending console(s) (use no_console_suspend to debug)
[125708.079608] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[125708.082147] sd 0:0:0:0: [sda] Stopping disk
[125708.082511] serial 00:07: disabled
[125708.082515] serial 00:07: System wakeup disabled by ACPI
[125708.082616] parport_pc 00:04: disabled
[125708.533909] PM: suspend of devices complete after 455.720 msecs
[125708.534178] PM: late suspend of devices complete after 0.267 msecs
[125708.549859] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[125708.565796] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[125708.581899] PM: noirq suspend of devices complete after 47.822 msecs
[125708.583182] ACPI: Preparing to enter system sleep state S3
[125708.981293] PM: Saving platform NVS memory
[125708.981583] Disabling non-boot CPUs ...
[125708.983030] smpboot: CPU 1 is now offline
[125708.983699] Broke affinity for irq 23
[125709.084564] smpboot: CPU 2 is now offline
[125709.085197] Broke affinity for irq 21
[125709.188318] smpboot: CPU 3 is now offline
[125709.190465] ACPI: Low-level resume complete
[125709.190529] PM: Restoring platform NVS memory
[125709.190605] PCI-DMA: Resuming GART IOMMU
[125709.190606] PCI-DMA: Restoring GART aperture settings
[125709.191433] LVT offset 0 assigned for vector 0xf9
[125709.191438] microcode: CPU0: new patch_level=0x010000dc
[125709.191462] Enabling non-boot CPUs ...
[125709.191521] smpboot: Booting Node 0 Processor 1 APIC 0x1
[125709.202444] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[125709.202445] perf: IBS APIC setup failed on cpu #1
[125709.204744] microcode: CPU1: new patch_level=0x010000dc
[125709.204747] CPU1 is up
[125709.204809] smpboot: Booting Node 0 Processor 2 APIC 0x2
[125709.215734] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[125709.215735] perf: IBS APIC setup failed on cpu #2
[125709.218049] microcode: CPU2: new patch_level=0x010000dc
[125709.218052] CPU2 is up
[125709.218140] smpboot: Booting Node 0 Processor 3 APIC 0x3
[125709.229063] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[125709.229064] perf: IBS APIC setup failed on cpu #3
[125709.231329] microcode: CPU3: new patch_level=0x010000dc
[125709.231332] CPU3 is up
[125709.235799] ACPI: Waking up from system sleep state S3
[125709.250358] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[125709.266319] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[125709.266400] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.282320] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.314254] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.330219] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.346182] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.346301] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.346369] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.346440] pci 0000:00:00.0: Found enabled HT MSI Mapping
[125709.378220] PM: noirq resume of devices complete after 142.296 msecs
[125709.378344] PM: early resume of devices complete after 0.081 msecs
[125709.378418] ohci_hcd 0000:00:02.0: setting latency timer to 64
[125709.378467] ehci-pci 0000:00:02.1: setting latency timer to 64
[125709.378484] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[125709.378491] pci 0000:00:04.0: setting latency timer to 64
[125709.378527] pata_amd 0000:00:06.0: setting latency timer to 64
[125709.378648] sata_nv 0000:00:08.0: setting latency timer to 64
[125709.378665] sata_nv 0000:00:08.1: setting latency timer to 64
[125709.378791] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[125709.379600] parport_pc 00:04: activated
[125709.380734] serial 00:07: activated
[125709.381477] ata6: port disabled--ignoring
[125709.398413] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[125709.400785] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[125709.400897] radeon 0000:02:00.0: WB enabled
[125709.400899] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[125709.400900] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[125709.416872] [drm] ring test on 0 succeeded in 1 usecs
[125709.416927] [drm] ring test on 3 succeeded in 1 usecs
[125709.416952] [drm] ib test on ring 0 succeeded in 0 usecs
[125709.416977] [drm] ib test on ring 3 succeeded in 1 usecs
[125709.542262] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[125709.542269] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[125709.542299] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[125709.558182] ata5.00: configured for UDMA/33
[125709.585565] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[125709.845027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[125709.853117] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[125709.885704] ata1.00: configured for UDMA/133
[125709.885833] sd 0:0:0:0: [sda] Starting disk
[125709.900855] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[125709.939124] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[125709.939129] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[125710.110617] ata3: SATA link down (SStatus 0 SControl 300)
[125710.110622] ata2: SATA link down (SStatus 0 SControl 300)
[125710.120862] ata4: SATA link down (SStatus 0 SControl 300)
[125710.128522] PM: resume of devices complete after 751.898 msecs
[125710.128657] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input23
[125711.126212] 4:3:1: cannot set freq 16000 to ep 0x86
[125711.288880] set resolution quirk: cval->res = 384
[125711.295790] Restarting tasks ... done.
[125711.664675] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[125711.664768] forcedeth 0000:00:07.0 eth0: MSI enabled
[129305.189028] PM: Syncing filesystems ... done.
[129305.425734] Freezing user space processes ... (elapsed 0.01 seconds) done.
[129305.440198] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[129305.456172] Suspending console(s) (use no_console_suspend to debug)
[129305.456704] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[129305.456864] sd 0:0:0:0: [sda] Stopping disk
[129305.459580] serial 00:07: disabled
[129305.459584] serial 00:07: System wakeup disabled by ACPI
[129305.459676] parport_pc 00:04: disabled
[129305.907010] PM: suspend of devices complete after 451.715 msecs
[129305.907294] PM: late suspend of devices complete after 0.281 msecs
[129305.922966] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[129305.938902] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[129305.954979] PM: noirq suspend of devices complete after 47.787 msecs
[129305.956270] ACPI: Preparing to enter system sleep state S3
[129306.354420] PM: Saving platform NVS memory
[129306.354713] Disabling non-boot CPUs ...
[129306.356084] smpboot: CPU 1 is now offline
[129306.356758] Broke affinity for irq 23
[129306.357772] smpboot: CPU 2 is now offline
[129306.358275] Broke affinity for irq 21
[129306.461651] smpboot: CPU 3 is now offline
[129306.463796] ACPI: Low-level resume complete
[129306.463860] PM: Restoring platform NVS memory
[129306.463938] PCI-DMA: Resuming GART IOMMU
[129306.463938] PCI-DMA: Restoring GART aperture settings
[129306.464765] LVT offset 0 assigned for vector 0xf9
[129306.464771] microcode: CPU0: new patch_level=0x010000dc
[129306.464794] Enabling non-boot CPUs ...
[129306.464855] smpboot: Booting Node 0 Processor 1 APIC 0x1
[129306.475779] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[129306.475780] perf: IBS APIC setup failed on cpu #1
[129306.478079] microcode: CPU1: new patch_level=0x010000dc
[129306.478082] CPU1 is up
[129306.478144] smpboot: Booting Node 0 Processor 2 APIC 0x2
[129306.489069] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[129306.489070] perf: IBS APIC setup failed on cpu #2
[129306.491383] microcode: CPU2: new patch_level=0x010000dc
[129306.491387] CPU2 is up
[129306.491474] smpboot: Booting Node 0 Processor 3 APIC 0x3
[129306.502397] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[129306.502398] perf: IBS APIC setup failed on cpu #3
[129306.504667] microcode: CPU3: new patch_level=0x010000dc
[129306.504669] CPU3 is up
[129306.509140] ACPI: Waking up from system sleep state S3
[129306.523707] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[129306.539668] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[129306.539750] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.555669] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.587603] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.603568] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.619530] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.619644] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.619712] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.619783] pci 0000:00:00.0: Found enabled HT MSI Mapping
[129306.651562] PM: noirq resume of devices complete after 142.286 msecs
[129306.651710] PM: early resume of devices complete after 0.099 msecs
[129306.651783] ohci_hcd 0000:00:02.0: setting latency timer to 64
[129306.651835] ehci-pci 0000:00:02.1: setting latency timer to 64
[129306.651854] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[129306.651863] pci 0000:00:04.0: setting latency timer to 64
[129306.651900] pata_amd 0000:00:06.0: setting latency timer to 64
[129306.651991] sata_nv 0000:00:08.0: setting latency timer to 64
[129306.652022] sata_nv 0000:00:08.1: setting latency timer to 64
[129306.652191] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[129306.652763] parport_pc 00:04: activated
[129306.653409] serial 00:07: activated
[129306.654731] ata6: port disabled--ignoring
[129306.671745] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[129306.674120] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[129306.674229] radeon 0000:02:00.0: WB enabled
[129306.674231] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[129306.674232] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[129306.690197] [drm] ring test on 0 succeeded in 1 usecs
[129306.690253] [drm] ring test on 3 succeeded in 1 usecs
[129306.690278] [drm] ib test on ring 0 succeeded in 0 usecs
[129306.690303] [drm] ib test on ring 3 succeeded in 1 usecs
[129306.815572] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[129306.815574] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[129306.815585] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[129306.831515] ata5.00: configured for UDMA/33
[129307.018559] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[129307.118378] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[129307.126440] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[129307.163252] ata1.00: configured for UDMA/133
[129307.163379] sd 0:0:0:0: [sda] Starting disk
[129307.325829] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[129307.383963] ata2: SATA link down (SStatus 0 SControl 300)
[129307.383965] ata3: SATA link down (SStatus 0 SControl 300)
[129307.394227] ata4: SATA link down (SStatus 0 SControl 300)
[129307.679395] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[129307.679400] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[129307.679843] PM: resume of devices complete after 1030.481 msecs
[129307.679940] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input24
[129308.674924] 4:3:1: cannot set freq 16000 to ep 0x86
[129308.840089] set resolution quirk: cval->res = 384
[129308.846929] Restarting tasks ... done.
[129309.225163] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[129309.225225] forcedeth 0000:00:07.0 eth0: MSI enabled
[129310.111398] usb 2-1: USB disconnect, device number 2
[129310.314911] usb 2-1: new low-speed USB device number 5 using ohci_hcd
[129310.528502] usb 2-1: New USB device found, idVendor=046d, idProduct=c31c
[129310.528513] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[129310.528525] usb 2-1: Product: USB Keyboard
[129310.528531] usb 2-1: Manufacturer: Logitech
[129310.545110] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input25
[129310.545363] hid-generic 0003:046D:C31C.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:02.0-1/input0
[129310.563565] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input26
[129310.565128] hid-generic 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:02.0-1/input1
[129310.578275] usb 2-2: USB disconnect, device number 3
[129310.777811] usb 2-2: new low-speed USB device number 6 using ohci_hcd
[129310.988443] usb 2-2: New USB device found, idVendor=413c, idProduct=3016
[129310.988456] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[129310.988464] usb 2-2: Product: Dell Premium USB Optical Mouse
[129311.001048] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input27
[129311.001411] hid-generic 0003:413C:3016.0006: input,hidraw2: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:02.0-2/input0
[132902.983077] PM: Syncing filesystems ... done.
[132903.227076] Freezing user space processes ... (elapsed 0.01 seconds) done.
[132903.241548] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[132903.257551] Suspending console(s) (use no_console_suspend to debug)
[132903.258052] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[132903.258218] sd 0:0:0:0: [sda] Stopping disk
[132903.260917] serial 00:07: disabled
[132903.260921] serial 00:07: System wakeup disabled by ACPI
[132903.261013] parport_pc 00:04: disabled
[132903.708381] PM: suspend of devices complete after 451.732 msecs
[132903.708652] PM: late suspend of devices complete after 0.267 msecs
[132903.724329] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[132903.740269] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[132903.756345] PM: noirq suspend of devices complete after 47.796 msecs
[132903.757636] ACPI: Preparing to enter system sleep state S3
[132904.155770] PM: Saving platform NVS memory
[132904.156065] Disabling non-boot CPUs ...
[132904.259044] smpboot: CPU 1 is now offline
[132904.259740] Broke affinity for irq 21
[132904.259751] Broke affinity for irq 23
[132904.260760] smpboot: CPU 2 is now offline
[132904.262443] smpboot: CPU 3 is now offline
[132904.264444] ACPI: Low-level resume complete
[132904.264508] PM: Restoring platform NVS memory
[132904.264583] PCI-DMA: Resuming GART IOMMU
[132904.264584] PCI-DMA: Restoring GART aperture settings
[132904.265416] LVT offset 0 assigned for vector 0xf9
[132904.265422] microcode: CPU0: new patch_level=0x010000dc
[132904.265456] Enabling non-boot CPUs ...
[132904.265516] smpboot: Booting Node 0 Processor 1 APIC 0x1
[132904.276440] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[132904.276441] perf: IBS APIC setup failed on cpu #1
[132904.278742] microcode: CPU1: new patch_level=0x010000dc
[132904.278745] CPU1 is up
[132904.278806] smpboot: Booting Node 0 Processor 2 APIC 0x2
[132904.289731] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[132904.289732] perf: IBS APIC setup failed on cpu #2
[132904.292050] microcode: CPU2: new patch_level=0x010000dc
[132904.292052] CPU2 is up
[132904.292140] smpboot: Booting Node 0 Processor 3 APIC 0x3
[132904.303064] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[132904.303065] perf: IBS APIC setup failed on cpu #3
[132904.305329] microcode: CPU3: new patch_level=0x010000dc
[132904.305332] CPU3 is up
[132904.310534] ACPI: Waking up from system sleep state S3
[132904.325062] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[132904.341028] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[132904.341110] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.357030] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.388965] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.404930] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.420893] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.421011] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.421080] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.421151] pci 0000:00:00.0: Found enabled HT MSI Mapping
[132904.452930] PM: noirq resume of devices complete after 142.262 msecs
[132904.453077] PM: early resume of devices complete after 0.099 msecs
[132904.453148] ohci_hcd 0000:00:02.0: setting latency timer to 64
[132904.453201] ehci-pci 0000:00:02.1: setting latency timer to 64
[132904.453225] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[132904.453234] pci 0000:00:04.0: setting latency timer to 64
[132904.453259] pata_amd 0000:00:06.0: setting latency timer to 64
[132904.453328] sata_nv 0000:00:08.0: setting latency timer to 64
[132904.453542] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[132904.453958] sata_nv 0000:00:08.1: setting latency timer to 64
[132904.454600] parport_pc 00:04: activated
[132904.455782] serial 00:07: activated
[132904.456583] ata6: port disabled--ignoring
[132904.473118] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[132904.475490] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[132904.475601] radeon 0000:02:00.0: WB enabled
[132904.475603] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[132904.475605] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[132904.491571] [drm] ring test on 0 succeeded in 1 usecs
[132904.491626] [drm] ring test on 3 succeeded in 1 usecs
[132904.491652] [drm] ib test on ring 0 succeeded in 0 usecs
[132904.491677] [drm] ib test on ring 3 succeeded in 1 usecs
[132904.616938] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[132904.616940] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[132904.616952] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[132904.632884] ata5.00: configured for UDMA/33
[132904.660282] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[132904.919752] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[132904.927830] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[132904.956135] ata1.00: configured for UDMA/133
[132904.956228] sd 0:0:0:0: [sda] Starting disk
[132904.975510] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[132905.013839] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[132905.013844] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[132905.185344] ata4: SATA link down (SStatus 0 SControl 300)
[132905.185347] ata2: SATA link down (SStatus 0 SControl 300)
[132905.195590] ata3: SATA link down (SStatus 0 SControl 300)
[132905.200191] PM: resume of devices complete after 748.826 msecs
[132905.200358] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input28
[132906.196936] 4:3:1: cannot set freq 16000 to ep 0x86
[132906.360355] set resolution quirk: cval->res = 384
[132906.367300] Restarting tasks ... done.
[132906.728113] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[132906.728174] forcedeth 0000:00:07.0 eth0: MSI enabled
[136499.851451] PM: Syncing filesystems ... done.
[136500.173125] Freezing user space processes ... (elapsed 0.01 seconds) done.
[136500.188194] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[136500.204200] Suspending console(s) (use no_console_suspend to debug)
[136500.204705] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[136500.204966] sd 0:0:0:0: [sda] Stopping disk
[136500.207476] serial 00:07: disabled
[136500.207479] serial 00:07: System wakeup disabled by ACPI
[136500.207572] parport_pc 00:04: disabled
[136500.655025] PM: suspend of devices complete after 451.725 msecs
[136500.655305] PM: late suspend of devices complete after 0.277 msecs
[136500.670994] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[136500.686927] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[136500.703017] PM: noirq suspend of devices complete after 47.814 msecs
[136500.704306] ACPI: Preparing to enter system sleep state S3
[136501.102419] PM: Saving platform NVS memory
[136501.102714] Disabling non-boot CPUs ...
[136501.104127] smpboot: CPU 1 is now offline
[136501.104846] Broke affinity for irq 23
[136501.105885] smpboot: CPU 2 is now offline
[136501.107480] smpboot: CPU 3 is now offline
[136501.109514] ACPI: Low-level resume complete
[136501.109578] PM: Restoring platform NVS memory
[136501.109652] PCI-DMA: Resuming GART IOMMU
[136501.109652] PCI-DMA: Restoring GART aperture settings
[136501.110479] LVT offset 0 assigned for vector 0xf9
[136501.110485] microcode: CPU0: new patch_level=0x010000dc
[136501.110509] Enabling non-boot CPUs ...
[136501.110567] smpboot: Booting Node 0 Processor 1 APIC 0x1
[136501.121492] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[136501.121493] perf: IBS APIC setup failed on cpu #1
[136501.123796] microcode: CPU1: new patch_level=0x010000dc
[136501.123798] CPU1 is up
[136501.123860] smpboot: Booting Node 0 Processor 2 APIC 0x2
[136501.134784] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[136501.134785] perf: IBS APIC setup failed on cpu #2
[136501.137122] microcode: CPU2: new patch_level=0x010000dc
[136501.137125] CPU2 is up
[136501.137207] smpboot: Booting Node 0 Processor 3 APIC 0x3
[136501.148130] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[136501.148131] perf: IBS APIC setup failed on cpu #3
[136501.150359] microcode: CPU3: new patch_level=0x010000dc
[136501.150361] CPU3 is up
[136501.155583] ACPI: Waking up from system sleep state S3
[136501.171927] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[136501.187892] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[136501.187975] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.203895] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.235829] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.251794] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.267758] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.267876] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.267945] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.268016] pci 0000:00:00.0: Found enabled HT MSI Mapping
[136501.299793] PM: noirq resume of devices complete after 144.066 msecs
[136501.299945] PM: early resume of devices complete after 0.102 msecs
[136501.300092] ehci-pci 0000:00:02.1: setting latency timer to 64
[136501.300099] ohci_hcd 0000:00:02.0: setting latency timer to 64
[136501.300105] pci 0000:00:04.0: setting latency timer to 64
[136501.300136] pata_amd 0000:00:06.0: setting latency timer to 64
[136501.300151] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[136501.300288] sata_nv 0000:00:08.0: setting latency timer to 64
[136501.300363] sata_nv 0000:00:08.1: setting latency timer to 64
[136501.300440] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[136501.301265] parport_pc 00:04: activated
[136501.302496] serial 00:07: activated
[136501.303084] ata6: port disabled--ignoring
[136501.319958] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[136501.322329] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[136501.322417] radeon 0000:02:00.0: WB enabled
[136501.322419] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[136501.322420] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[136501.338755] [drm] ring test on 0 succeeded in 1 usecs
[136501.338811] [drm] ring test on 3 succeeded in 1 usecs
[136501.338837] [drm] ib test on ring 0 succeeded in 0 usecs
[136501.338861] [drm] ib test on ring 3 succeeded in 1 usecs
[136501.463837] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[136501.463843] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[136501.463873] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[136501.479682] ata5.00: configured for UDMA/33
[136501.507141] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[136501.766595] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[136501.774678] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[136501.807068] ata1.00: configured for UDMA/133
[136501.807164] sd 0:0:0:0: [sda] Starting disk
[136501.822374] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[136501.860458] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[136501.860463] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[136502.032191] ata3: SATA link down (SStatus 0 SControl 300)
[136502.032194] ata2: SATA link down (SStatus 0 SControl 300)
[136502.042435] ata4: SATA link down (SStatus 0 SControl 300)
[136502.047093] PM: resume of devices complete after 748.861 msecs
[136502.047244] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input29
[136503.047801] 4:3:2: cannot set freq 24000 to ep 0x86
[136503.204482] set resolution quirk: cval->res = 384
[136503.211325] Restarting tasks ... done.
[136503.611494] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[136503.611557] forcedeth 0000:00:07.0 eth0: MSI enabled
[140097.470091] PM: Syncing filesystems ... done.
[140097.786822] Freezing user space processes ... (elapsed 0.01 seconds) done.
[140097.802077] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[140097.818080] Suspending console(s) (use no_console_suspend to debug)
[140097.818601] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[140097.819033] sd 0:0:0:0: [sda] Stopping disk
[140097.821404] serial 00:07: disabled
[140097.821408] serial 00:07: System wakeup disabled by ACPI
[140097.821509] parport_pc 00:04: disabled
[140098.268902] PM: suspend of devices complete after 451.724 msecs
[140098.269182] PM: late suspend of devices complete after 0.277 msecs
[140098.284858] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[140098.300793] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[140098.316869] PM: noirq suspend of devices complete after 47.789 msecs
[140098.318154] ACPI: Preparing to enter system sleep state S3
[140098.716289] PM: Saving platform NVS memory
[140098.716580] Disabling non-boot CPUs ...
[140098.717991] smpboot: CPU 1 is now offline
[140098.718701] Broke affinity for irq 21
[140098.718712] Broke affinity for irq 23
[140098.819560] smpboot: CPU 2 is now offline
[140098.821249] smpboot: CPU 3 is now offline
[140098.823236] ACPI: Low-level resume complete
[140098.823301] PM: Restoring platform NVS memory
[140098.823376] PCI-DMA: Resuming GART IOMMU
[140098.823376] PCI-DMA: Restoring GART aperture settings
[140098.824213] LVT offset 0 assigned for vector 0xf9
[140098.824218] microcode: CPU0: new patch_level=0x010000dc
[140098.824240] Enabling non-boot CPUs ...
[140098.824300] smpboot: Booting Node 0 Processor 1 APIC 0x1
[140098.835224] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[140098.835225] perf: IBS APIC setup failed on cpu #1
[140098.837531] microcode: CPU1: new patch_level=0x010000dc
[140098.837534] CPU1 is up
[140098.837585] smpboot: Booting Node 0 Processor 2 APIC 0x2
[140098.848512] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[140098.848513] perf: IBS APIC setup failed on cpu #2
[140098.850774] microcode: CPU2: new patch_level=0x010000dc
[140098.850777] CPU2 is up
[140098.850849] smpboot: Booting Node 0 Processor 3 APIC 0x3
[140098.861780] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[140098.861781] perf: IBS APIC setup failed on cpu #3
[140098.864005] microcode: CPU3: new patch_level=0x010000dc
[140098.864007] CPU3 is up
[140098.868502] ACPI: Waking up from system sleep state S3
[140098.881589] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[140098.897552] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[140098.897633] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.913554] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.945489] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.961462] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.977425] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.977543] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.977612] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140098.977683] pci 0000:00:00.0: Found enabled HT MSI Mapping
[140099.009462] PM: noirq resume of devices complete after 140.817 msecs
[140099.009587] PM: early resume of devices complete after 0.081 msecs
[140099.009662] ohci_hcd 0000:00:02.0: setting latency timer to 64
[140099.009713] ehci-pci 0000:00:02.1: setting latency timer to 64
[140099.009734] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[140099.009741] pci 0000:00:04.0: setting latency timer to 64
[140099.009760] pata_amd 0000:00:06.0: setting latency timer to 64
[140099.009881] sata_nv 0000:00:08.0: setting latency timer to 64
[140099.009951] sata_nv 0000:00:08.1: setting latency timer to 64
[140099.010032] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[140099.011014] parport_pc 00:04: activated
[140099.012148] serial 00:07: activated
[140099.012810] ata6: port disabled--ignoring
[140099.029663] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[140099.032033] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[140099.032130] radeon 0000:02:00.0: WB enabled
[140099.032132] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[140099.032133] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[140099.048101] [drm] ring test on 0 succeeded in 1 usecs
[140099.048157] [drm] ring test on 3 succeeded in 1 usecs
[140099.048183] [drm] ib test on ring 0 succeeded in 0 usecs
[140099.048207] [drm] ib test on ring 3 succeeded in 1 usecs
[140099.173467] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[140099.173469] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[140099.173480] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[140099.189373] ata5.00: configured for UDMA/33
[140099.216830] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[140099.476248] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[140099.484351] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[140099.520362] ata1.00: configured for UDMA/133
[140099.520404] sd 0:0:0:0: [sda] Starting disk
[140099.532024] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[140099.570392] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[140099.570397] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[140099.741866] ata4: SATA link down (SStatus 0 SControl 300)
[140099.741885] ata2: SATA link down (SStatus 0 SControl 300)
[140099.752149] ata3: SATA link down (SStatus 0 SControl 300)
[140099.752792] PM: resume of devices complete after 744.911 msecs
[140099.752912] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input30
[140100.749499] 4:3:1: cannot set freq 16000 to ep 0x86
[140100.912918] set resolution quirk: cval->res = 384
[140100.920106] Restarting tasks ... done.
[140101.297652] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[140101.297713] forcedeth 0000:00:07.0 eth0: MSI enabled
[146464.052834] friends-dispatc[13656]: segfault at 7f07cfb30e00 ip 00007f07cfab6490 sp 00007fff05efcef8 error 7 in libglib-2.0.so.0.3600.0[7f07cfa53000+f9000]
[146590.606302] usb 1-6: new high-speed USB device number 8 using ehci-pci
[146590.744303] usb 1-6: New USB device found, idVendor=04e8, idProduct=663e
[146590.744315] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[146590.744323] usb 1-6: Product: SAMSUNG Mobile Device
[146590.744329] usb 1-6: Manufacturer: Samsung
[146590.744334] usb 1-6: SerialNumber: 000000-00-0000000
[146591.629089] cdc_acm 1-6:3.1: ttyACM0: USB ACM device
[146591.631463] usbcore: registered new interface driver cdc_acm
[146591.631472] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[156622.807921] usb 1-6: USB disconnect, device number 8
[156630.350701] usb 1-6: new high-speed USB device number 9 using ehci-pci
[156630.483426] usb 1-6: New USB device found, idVendor=04e8, idProduct=685b
[156630.483439] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[156630.483446] usb 1-6: Product: SAMSUNG_Android
[156630.483452] usb 1-6: Manufacturer: SAMSUNG
[156630.483458] usb 1-6: SerialNumber: 016A0002FFFC0000
[156630.484485] scsi8 : usb-storage 1-6:1.0
[156631.480823] scsi 8:0:0:0: Direct-Access     Samsung  YP-GS1           0001 PQ: 0 ANSI: 2
[156631.481426] scsi 8:0:0:1: Direct-Access     Samsung  YP-GS1 Card      0001 PQ: 0 ANSI: 2
[156631.482764] sd 8:0:0:0: Attached scsi generic sg3 type 0
[156631.483133] sd 8:0:0:1: Attached scsi generic sg4 type 0
[156631.494980] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[156631.495606] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[159521.488048] usb 1-6: USB disconnect, device number 9
[162184.501964] PM: Syncing filesystems ... done.
[162184.751803] Freezing user space processes ... (elapsed 0.01 seconds) done.
[162184.766327] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[162184.782306] Suspending console(s) (use no_console_suspend to debug)
[162184.782838] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[162184.782998] sd 0:0:0:0: [sda] Stopping disk
[162184.785739] serial 00:07: disabled
[162184.785743] serial 00:07: System wakeup disabled by ACPI
[162184.785846] parport_pc 00:04: disabled
[162185.233151] PM: suspend of devices complete after 451.731 msecs
[162185.233426] PM: late suspend of devices complete after 0.272 msecs
[162185.249085] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[162185.265019] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[162185.281093] PM: noirq suspend of devices complete after 47.769 msecs
[162185.282381] ACPI: Preparing to enter system sleep state S3
[162185.680505] PM: Saving platform NVS memory
[162185.680801] Disabling non-boot CPUs ...
[162185.682205] smpboot: CPU 1 is now offline
[162185.682834] Broke affinity for irq 23
[162185.683845] smpboot: CPU 2 is now offline
[162185.684553] Broke affinity for irq 21
[162185.787771] smpboot: CPU 3 is now offline
[162185.789934] ACPI: Low-level resume complete
[162185.789997] PM: Restoring platform NVS memory
[162185.790074] PCI-DMA: Resuming GART IOMMU
[162185.790074] PCI-DMA: Restoring GART aperture settings
[162185.790900] LVT offset 0 assigned for vector 0xf9
[162185.790906] microcode: CPU0: new patch_level=0x010000dc
[162185.790928] Enabling non-boot CPUs ...
[162185.790989] smpboot: Booting Node 0 Processor 1 APIC 0x1
[162185.801913] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[162185.801914] perf: IBS APIC setup failed on cpu #1
[162185.804214] microcode: CPU1: new patch_level=0x010000dc
[162185.804217] CPU1 is up
[162185.804280] smpboot: Booting Node 0 Processor 2 APIC 0x2
[162185.815205] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[162185.815206] perf: IBS APIC setup failed on cpu #2
[162185.817522] microcode: CPU2: new patch_level=0x010000dc
[162185.817525] CPU2 is up
[162185.817612] smpboot: Booting Node 0 Processor 3 APIC 0x3
[162185.828534] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[162185.828535] perf: IBS APIC setup failed on cpu #3
[162185.830799] microcode: CPU3: new patch_level=0x010000dc
[162185.830801] CPU3 is up
[162185.836023] ACPI: Waking up from system sleep state S3
[162185.849826] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[162185.865786] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[162185.865868] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.881788] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.913722] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.929688] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.945650] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.945764] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.945832] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.945903] pci 0000:00:00.0: Found enabled HT MSI Mapping
[162185.977680] PM: noirq resume of devices complete after 141.522 msecs
[162185.977830] PM: early resume of devices complete after 0.100 msecs
[162185.977952] ohci_hcd 0000:00:02.0: setting latency timer to 64
[162185.977973] ehci-pci 0000:00:02.1: setting latency timer to 64
[162185.977983] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[162185.977993] pci 0000:00:04.0: setting latency timer to 64
[162185.978036] pata_amd 0000:00:06.0: setting latency timer to 64
[162185.978145] sata_nv 0000:00:08.0: setting latency timer to 64
[162185.978319] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[162185.978879] parport_pc 00:04: activated
[162185.978979] sata_nv 0000:00:08.1: setting latency timer to 64
[162185.979410] serial 00:07: activated
[162185.980725] ata6: port disabled--ignoring
[162185.997868] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[162186.000225] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[162186.000335] radeon 0000:02:00.0: WB enabled
[162186.000337] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[162186.000339] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[162186.016306] [drm] ring test on 0 succeeded in 1 usecs
[162186.016361] [drm] ring test on 3 succeeded in 1 usecs
[162186.016387] [drm] ib test on ring 0 succeeded in 0 usecs
[162186.016411] [drm] ib test on ring 3 succeeded in 1 usecs
[162186.141730] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[162186.141737] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[162186.141767] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[162186.157609] ata5.00: configured for UDMA/33
[162186.185026] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[162186.444431] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[162186.452577] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[162186.480652] ata1.00: configured for UDMA/133
[162186.480698] sd 0:0:0:0: [sda] Starting disk
[162186.500316] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[162186.538697] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[162186.538702] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[162186.710091] ata4: SATA link down (SStatus 0 SControl 300)
[162186.710099] ata2: SATA link down (SStatus 0 SControl 300)
[162186.720366] ata3: SATA link down (SStatus 0 SControl 300)
[162186.722986] PM: resume of devices complete after 746.865 msecs
[162186.723134] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input31
[162187.717678] 4:3:1: cannot set freq 16000 to ep 0x86
[162187.882844] set resolution quirk: cval->res = 384
[162187.889992] Restarting tasks ... done.
[162188.343863] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[162188.343897] forcedeth 0000:00:07.0 eth0: MSI enabled
[165782.159869] PM: Syncing filesystems ... done.
[165782.471903] Freezing user space processes ... (elapsed 0.01 seconds) done.
[165782.487116] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[165782.503101] Suspending console(s) (use no_console_suspend to debug)
[165782.503650] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[165782.506568] serial 00:07: disabled
[165782.506571] serial 00:07: System wakeup disabled by ACPI
[165782.506672] parport_pc 00:04: disabled
[165782.529412] sd 0:0:0:0: [sda] Stopping disk
[165782.981877] PM: suspend of devices complete after 479.731 msecs
[165782.982159] PM: late suspend of devices complete after 0.279 msecs
[165782.997840] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[165783.013757] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[165783.029840] PM: noirq suspend of devices complete after 47.783 msecs
[165783.031130] ACPI: Preparing to enter system sleep state S3
[165783.429253] PM: Saving platform NVS memory
[165783.429550] Disabling non-boot CPUs ...
[165783.532532] smpboot: CPU 1 is now offline
[165783.533413] Broke affinity for irq 23
[165783.636274] smpboot: CPU 2 is now offline
[165783.636941] Broke affinity for irq 21
[165783.637962] smpboot: CPU 3 is now offline
[165783.639918] ACPI: Low-level resume complete
[165783.639981] PM: Restoring platform NVS memory
[165783.640060] PCI-DMA: Resuming GART IOMMU
[165783.640061] PCI-DMA: Restoring GART aperture settings
[165783.640893] LVT offset 0 assigned for vector 0xf9
[165783.640898] microcode: CPU0: new patch_level=0x010000dc
[165783.640921] Enabling non-boot CPUs ...
[165783.640981] smpboot: Booting Node 0 Processor 1 APIC 0x1
[165783.651905] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[165783.651906] perf: IBS APIC setup failed on cpu #1
[165783.654205] microcode: CPU1: new patch_level=0x010000dc
[165783.654208] CPU1 is up
[165783.654271] smpboot: Booting Node 0 Processor 2 APIC 0x2
[165783.665196] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[165783.665197] perf: IBS APIC setup failed on cpu #2
[165783.667534] microcode: CPU2: new patch_level=0x010000dc
[165783.667537] CPU2 is up
[165783.667619] smpboot: Booting Node 0 Processor 3 APIC 0x3
[165783.678543] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[165783.678544] perf: IBS APIC setup failed on cpu #3
[165783.680776] microcode: CPU3: new patch_level=0x010000dc
[165783.680778] CPU3 is up
[165783.685980] ACPI: Waking up from system sleep state S3
[165783.702308] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[165783.718273] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[165783.718356] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.734276] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.766210] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.782175] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.798139] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.798256] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.798325] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.798397] pci 0000:00:00.0: Found enabled HT MSI Mapping
[165783.830174] PM: noirq resume of devices complete after 144.038 msecs
[165783.830323] PM: early resume of devices complete after 0.100 msecs
[165783.830437] ohci_hcd 0000:00:02.0: setting latency timer to 64
[165783.830457] ehci-pci 0000:00:02.1: setting latency timer to 64
[165783.830476] pci 0000:00:04.0: setting latency timer to 64
[165783.830494] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[165783.830521] pata_amd 0000:00:06.0: setting latency timer to 64
[165783.830645] sata_nv 0000:00:08.0: setting latency timer to 64
[165783.830646] sata_nv 0000:00:08.1: setting latency timer to 64
[165783.830796] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[165783.831923] parport_pc 00:04: activated
[165783.833083] serial 00:07: activated
[165783.833549] ata6: port disabled--ignoring
[165783.850351] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[165783.852721] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[165783.852828] radeon 0000:02:00.0: WB enabled
[165783.852830] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[165783.852831] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[165783.868797] [drm] ring test on 0 succeeded in 1 usecs
[165783.868852] [drm] ring test on 3 succeeded in 1 usecs
[165783.868878] [drm] ib test on ring 0 succeeded in 0 usecs
[165783.868903] [drm] ib test on ring 3 succeeded in 1 usecs
[165783.994185] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[165783.994187] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[165783.994198] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[165784.010135] ata5.00: configured for UDMA/33
[165784.037527] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[165784.296951] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[165784.305071] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[165784.333661] ata1.00: configured for UDMA/133
[165784.333806] sd 0:0:0:0: [sda] Starting disk
[165784.352792] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[165784.390944] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[165784.390949] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[165784.562581] ata4: SATA link down (SStatus 0 SControl 300)
[165784.562584] ata2: SATA link down (SStatus 0 SControl 300)
[165784.572813] ata3: SATA link down (SStatus 0 SControl 300)
[165784.575469] PM: resume of devices complete after 746.854 msecs
[165784.575621] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input32
[165785.570177] 4:3:1: cannot set freq 16000 to ep 0x86
[165785.736335] set resolution quirk: cval->res = 384
[165785.743547] Restarting tasks ... done.
[165786.048027] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[165786.048057] forcedeth 0000:00:07.0 eth0: MSI enabled
[169379.010570] PM: Syncing filesystems ... done.
[169379.277975] Freezing user space processes ... (elapsed 0.01 seconds) done.
[169379.292651] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[169379.308644] Suspending console(s) (use no_console_suspend to debug)
[169379.309171] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[169379.309330] sd 0:0:0:0: [sda] Stopping disk
[169379.312070] serial 00:07: disabled
[169379.312078] serial 00:07: System wakeup disabled by ACPI
[169379.312182] parport_pc 00:04: disabled
[169379.759473] PM: suspend of devices complete after 451.719 msecs
[169379.759751] PM: late suspend of devices complete after 0.275 msecs
[169379.775424] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[169379.791360] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[169379.807437] PM: noirq suspend of devices complete after 47.788 msecs
[169379.808723] ACPI: Preparing to enter system sleep state S3
[169380.206879] PM: Saving platform NVS memory
[169380.207170] Disabling non-boot CPUs ...
[169380.310133] smpboot: CPU 1 is now offline
[169380.310844] Broke affinity for irq 21
[169380.310855] Broke affinity for irq 23
[169380.311868] smpboot: CPU 2 is now offline
[169380.413880] smpboot: CPU 3 is now offline
[169380.415984] ACPI: Low-level resume complete
[169380.416048] PM: Restoring platform NVS memory
[169380.416124] PCI-DMA: Resuming GART IOMMU
[169380.416125] PCI-DMA: Restoring GART aperture settings
[169380.416951] LVT offset 0 assigned for vector 0xf9
[169380.416957] microcode: CPU0: new patch_level=0x010000dc
[169380.416979] Enabling non-boot CPUs ...
[169380.417041] smpboot: Booting Node 0 Processor 1 APIC 0x1
[169380.427964] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[169380.427966] perf: IBS APIC setup failed on cpu #1
[169380.430261] microcode: CPU1: new patch_level=0x010000dc
[169380.430264] CPU1 is up
[169380.430327] smpboot: Booting Node 0 Processor 2 APIC 0x2
[169380.441252] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[169380.441253] perf: IBS APIC setup failed on cpu #2
[169380.443570] microcode: CPU2: new patch_level=0x010000dc
[169380.443573] CPU2 is up
[169380.443662] smpboot: Booting Node 0 Processor 3 APIC 0x3
[169380.454584] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[169380.454585] perf: IBS APIC setup failed on cpu #3
[169380.456851] microcode: CPU3: new patch_level=0x010000dc
[169380.456853] CPU3 is up
[169380.462062] ACPI: Waking up from system sleep state S3
[169380.475921] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[169380.491879] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[169380.491961] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.507881] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.539815] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.555780] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.571744] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.571861] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.571930] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.572001] pci 0000:00:00.0: Found enabled HT MSI Mapping
[169380.603778] PM: noirq resume of devices complete after 141.588 msecs
[169380.603904] PM: early resume of devices complete after 0.082 msecs
[169380.603978] ohci_hcd 0000:00:02.0: setting latency timer to 64
[169380.604028] ehci-pci 0000:00:02.1: setting latency timer to 64
[169380.604047] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[169380.604055] pci 0000:00:04.0: setting latency timer to 64
[169380.604071] pata_amd 0000:00:06.0: setting latency timer to 64
[169380.604187] sata_nv 0000:00:08.1: setting latency timer to 64
[169380.604206] sata_nv 0000:00:08.0: setting latency timer to 64
[169380.604338] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[169380.605034] parport_pc 00:04: activated
[169380.605632] serial 00:07: activated
[169380.607051] ata6: port disabled--ignoring
[169380.623980] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[169380.626342] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[169380.626448] radeon 0000:02:00.0: WB enabled
[169380.626450] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[169380.626451] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[169380.642417] [drm] ring test on 0 succeeded in 1 usecs
[169380.642472] [drm] ring test on 3 succeeded in 1 usecs
[169380.642498] [drm] ib test on ring 0 succeeded in 0 usecs
[169380.642522] [drm] ib test on ring 3 succeeded in 1 usecs
[169380.767797] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[169380.767799] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[169380.767809] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[169380.783687] ata5.00: configured for UDMA/33
[169380.811134] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[169381.070592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[169381.078677] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[169381.114788] ata1.00: configured for UDMA/133
[169381.114867] sd 0:0:0:0: [sda] Starting disk
[169381.126419] usb 2-5: reset full-speed USB device number 4 using ohci_hcd
[169381.164658] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[169381.164663] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[169381.336179] ata4: SATA link down (SStatus 0 SControl 300)
[169381.336184] ata2: SATA link down (SStatus 0 SControl 300)
[169381.346448] ata3: SATA link down (SStatus 0 SControl 300)
[169381.347118] PM: resume of devices complete after 744.923 msecs
[169381.347202] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input33
[169382.343770] 4:3:1: cannot get freq at ep 0x86
[169382.508182] set resolution quirk: cval->res = 384
[169382.513739] Restarting tasks ... done.
[169382.814884] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[169382.814944] forcedeth 0000:00:07.0 eth0: MSI enabled
[173145.343089] PM: Syncing filesystems ... done.
[173145.405189] Freezing user space processes ... (elapsed 0.01 seconds) done.
[173145.419519] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[173145.435486] Suspending console(s) (use no_console_suspend to debug)
[173145.436033] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[173145.438784] serial 00:07: disabled
[173145.438788] serial 00:07: System wakeup disabled by ACPI
[173145.438882] parport_pc 00:04: disabled
[173145.556756] sd 0:0:0:0: [sda] Stopping disk
[173146.006041] PM: suspend of devices complete after 571.713 msecs
[173146.006328] PM: late suspend of devices complete after 0.284 msecs
[173146.021975] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[173146.037913] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[173146.053990] PM: noirq suspend of devices complete after 47.764 msecs
[173146.055275] ACPI: Preparing to enter system sleep state S3
[173146.453412] PM: Saving platform NVS memory
[173146.453708] Disabling non-boot CPUs ...
[173146.455156] smpboot: CPU 1 is now offline
[173146.455863] Broke affinity for irq 21
[173146.455874] Broke affinity for irq 23
[173146.456914] smpboot: CPU 2 is now offline
[173146.458520] smpboot: CPU 3 is now offline
[173146.460588] ACPI: Low-level resume complete
[173146.460652] PM: Restoring platform NVS memory
[173146.460729] PCI-DMA: Resuming GART IOMMU
[173146.460730] PCI-DMA: Restoring GART aperture settings
[173146.461555] LVT offset 0 assigned for vector 0xf9
[173146.461561] microcode: CPU0: new patch_level=0x010000dc
[173146.461584] Enabling non-boot CPUs ...
[173146.461643] smpboot: Booting Node 0 Processor 1 APIC 0x1
[173146.472567] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[173146.472568] perf: IBS APIC setup failed on cpu #1
[173146.474874] microcode: CPU1: new patch_level=0x010000dc
[173146.474877] CPU1 is up
[173146.474949] smpboot: Booting Node 0 Processor 2 APIC 0x2
[173146.485874] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[173146.485875] perf: IBS APIC setup failed on cpu #2
[173146.488212] microcode: CPU2: new patch_level=0x010000dc
[173146.488214] CPU2 is up
[173146.488297] smpboot: Booting Node 0 Processor 3 APIC 0x3
[173146.499220] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[173146.499221] perf: IBS APIC setup failed on cpu #3
[173146.501454] microcode: CPU3: new patch_level=0x010000dc
[173146.501456] CPU3 is up
[173146.506672] ACPI: Waking up from system sleep state S3
[173146.522933] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[173146.538898] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[173146.538981] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.554901] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.586835] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.602800] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.618765] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.618882] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.618951] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.619022] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173146.650800] PM: noirq resume of devices complete after 143.988 msecs
[173146.650948] PM: early resume of devices complete after 0.099 msecs
[173146.651097] ehci-pci 0000:00:02.1: setting latency timer to 64
[173146.651106] ohci_hcd 0000:00:02.0: setting latency timer to 64
[173146.651112] pci 0000:00:04.0: setting latency timer to 64
[173146.651115] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[173146.651124] pata_amd 0000:00:06.0: setting latency timer to 64
[173146.651211] sata_nv 0000:00:08.0: setting latency timer to 64
[173146.651258] sata_nv 0000:00:08.1: setting latency timer to 64
[173146.651429] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[173146.652002] parport_pc 00:04: activated
[173146.652472] serial 00:07: activated
[173146.653981] ata6: port disabled--ignoring
[173146.670993] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[173146.673346] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[173146.673452] radeon 0000:02:00.0: WB enabled
[173146.673454] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[173146.673455] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[173146.689420] [drm] ring test on 0 succeeded in 1 usecs
[173146.689476] [drm] ring test on 3 succeeded in 1 usecs
[173146.689501] [drm] ib test on ring 0 succeeded in 0 usecs
[173146.689526] [drm] ib test on ring 3 succeeded in 1 usecs
[173146.814809] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[173146.814811] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[173146.814822] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[173146.830764] ata5.00: configured for UDMA/33
[173146.953928] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[173147.117587] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[173147.125712] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[173147.157747] ata1.00: configured for UDMA/133
[173147.157798] sd 0:0:0:0: [sda] Starting disk
[173147.307479] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[173147.307484] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[173147.383185] ata4: SATA link down (SStatus 0 SControl 300)
[173147.383192] ata2: SATA link down (SStatus 0 SControl 300)
[173147.393468] ata3: SATA link down (SStatus 0 SControl 300)
[173147.394155] PM: resume of devices complete after 744.916 msecs
[173148.390805] 4:3:1: cannot set freq 16000 to ep 0x86
[173148.553971] set resolution quirk: cval->res = 384
[173148.561040] usb 2-5: USB disconnect, device number 4
[173148.560929] Restarting tasks ... done.
[173148.844683] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[173148.844743] forcedeth 0000:00:07.0 eth0: MSI enabled
[173150.244073] traps: pool[18333] general protection ip:7fbb1f9fdd3c sp:7fbb13ffe678 error:0 in libdbus-1.so.3.7.2[7fbb1f9d7000+43000]
[173192.432080] PM: Syncing filesystems ... done.
[173192.476812] Freezing user space processes ... (elapsed 0.01 seconds) done.
[173192.491223] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[173192.507192] Suspending console(s) (use no_console_suspend to debug)
[173192.507554] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[173192.510786] serial 00:07: disabled
[173192.510790] serial 00:07: System wakeup disabled by ACPI
[173192.510890] parport_pc 00:04: disabled
[173192.590797] sd 0:0:0:0: [sda] Stopping disk
[173193.042105] PM: suspend of devices complete after 535.727 msecs
[173193.042377] PM: late suspend of devices complete after 0.269 msecs
[173193.058032] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[173193.073975] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[173193.090059] PM: noirq suspend of devices complete after 47.760 msecs
[173193.091348] ACPI: Preparing to enter system sleep state S3
[173193.489615] PM: Saving platform NVS memory
[173193.489908] Disabling non-boot CPUs ...
[173193.491308] smpboot: CPU 1 is now offline
[173193.491919] Broke affinity for irq 21
[173193.491930] Broke affinity for irq 23
[173193.492941] smpboot: CPU 2 is now offline
[173193.596992] smpboot: CPU 3 is now offline
[173193.599107] ACPI: Low-level resume complete
[173193.599170] PM: Restoring platform NVS memory
[173193.599246] PCI-DMA: Resuming GART IOMMU
[173193.599246] PCI-DMA: Restoring GART aperture settings
[173193.600073] LVT offset 0 assigned for vector 0xf9
[173193.600079] microcode: CPU0: new patch_level=0x010000dc
[173193.600102] Enabling non-boot CPUs ...
[173193.600160] smpboot: Booting Node 0 Processor 1 APIC 0x1
[173193.611084] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[173193.611085] perf: IBS APIC setup failed on cpu #1
[173193.613388] microcode: CPU1: new patch_level=0x010000dc
[173193.613390] CPU1 is up
[173193.613453] smpboot: Booting Node 0 Processor 2 APIC 0x2
[173193.624378] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[173193.624379] perf: IBS APIC setup failed on cpu #2
[173193.626697] microcode: CPU2: new patch_level=0x010000dc
[173193.626700] CPU2 is up
[173193.626787] smpboot: Booting Node 0 Processor 3 APIC 0x3
[173193.637711] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[173193.637712] perf: IBS APIC setup failed on cpu #3
[173193.639982] microcode: CPU3: new patch_level=0x010000dc
[173193.639984] CPU3 is up
[173193.645201] ACPI: Waking up from system sleep state S3
[173193.659074] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[173193.675042] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[173193.675125] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.691053] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.723003] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.738976] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.754947] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.755061] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.755129] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.755200] pci 0000:00:00.0: Found enabled HT MSI Mapping
[173193.786990] PM: noirq resume of devices complete after 141.569 msecs
[173193.787135] PM: early resume of devices complete after 0.097 msecs
[173193.787257] ehci-pci 0000:00:02.1: setting latency timer to 64
[173193.787275] ohci_hcd 0000:00:02.0: setting latency timer to 64
[173193.787298] pci 0000:00:04.0: setting latency timer to 64
[173193.787302] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[173193.787317] pata_amd 0000:00:06.0: setting latency timer to 64
[173193.787440] sata_nv 0000:00:08.0: setting latency timer to 64
[173193.787516] sata_nv 0000:00:08.1: setting latency timer to 64
[173193.787597] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[173193.788392] parport_pc 00:04: activated
[173193.789807] serial 00:07: activated
[173193.790499] ata6: port disabled--ignoring
[173193.807167] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[173193.809537] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[173193.809621] radeon 0000:02:00.0: WB enabled
[173193.809623] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[173193.809624] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[173193.825607] [drm] ring test on 0 succeeded in 1 usecs
[173193.825663] [drm] ring test on 3 succeeded in 1 usecs
[173193.825689] [drm] ib test on ring 0 succeeded in 0 usecs
[173193.825713] [drm] ib test on ring 3 succeeded in 1 usecs
[173193.951125] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[173193.951133] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[173193.951162] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[173193.967111] ata5.00: configured for UDMA/33
[173193.994454] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[173194.254035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[173194.262115] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[173194.298983] ata1.00: configured for UDMA/133
[173194.299106] sd 0:0:0:0: [sda] Starting disk
[173194.348137] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[173194.348141] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[173194.519759] ata2: SATA link down (SStatus 0 SControl 300)
[173194.519762] ata3: SATA link down (SStatus 0 SControl 300)
[173194.530045] ata4: SATA link down (SStatus 0 SControl 300)
[173194.530702] PM: resume of devices complete after 744.903 msecs
[173195.527878] 4:3:1: cannot set freq 16000 to ep 0x86
[173195.690783] set resolution quirk: cval->res = 384
[173195.697741] Restarting tasks ... done.
[173196.010320] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[173196.010383] forcedeth 0000:00:07.0 eth0: MSI enabled
[173302.696596] telepathy-gabbl[19651]: segfault at 0 ip 00007f35bfb9ced7 sp 00007fffe0db31d8 error 6 in libdbus-1.so.3.7.2[7f35bfb76000+43000]
[177776.857893] PM: Syncing filesystems ... done.
[177777.174762] Freezing user space processes ... (elapsed 0.01 seconds) done.
[177777.189668] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[177777.205625] Suspending console(s) (use no_console_suspend to debug)
[177777.206109] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[177777.206533] sd 0:0:0:0: [sda] Stopping disk
[177777.209033] serial 00:07: disabled
[177777.209037] serial 00:07: System wakeup disabled by ACPI
[177777.209143] parport_pc 00:04: disabled
[177777.656451] PM: suspend of devices complete after 451.719 msecs
[177777.656738] PM: late suspend of devices complete after 0.285 msecs
[177777.672405] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[177777.688337] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[177777.704413] PM: noirq suspend of devices complete after 47.776 msecs
[177777.705704] ACPI: Preparing to enter system sleep state S3
[177778.103832] PM: Saving platform NVS memory
[177778.104126] Disabling non-boot CPUs ...
[177778.207135] smpboot: CPU 1 is now offline
[177778.207977] Broke affinity for irq 23
[177778.310868] smpboot: CPU 2 is now offline
[177778.311532] Broke affinity for irq 21
[177778.312550] smpboot: CPU 3 is now offline
[177778.314635] ACPI: Low-level resume complete
[177778.314699] PM: Restoring platform NVS memory
[177778.314775] PCI-DMA: Resuming GART IOMMU
[177778.314775] PCI-DMA: Restoring GART aperture settings
[177778.315612] LVT offset 0 assigned for vector 0xf9
[177778.315617] microcode: CPU0: new patch_level=0x010000dc
[177778.315640] Enabling non-boot CPUs ...
[177778.315700] smpboot: Booting Node 0 Processor 1 APIC 0x1
[177778.326623] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[177778.326624] perf: IBS APIC setup failed on cpu #1
[177778.328930] microcode: CPU1: new patch_level=0x010000dc
[177778.328933] CPU1 is up
[177778.328995] smpboot: Booting Node 0 Processor 2 APIC 0x2
[177778.339919] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[177778.339921] perf: IBS APIC setup failed on cpu #2
[177778.342256] microcode: CPU2: new patch_level=0x010000dc
[177778.342259] CPU2 is up
[177778.342339] smpboot: Booting Node 0 Processor 3 APIC 0x3
[177778.353263] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[177778.353265] perf: IBS APIC setup failed on cpu #3
[177778.355495] microcode: CPU3: new patch_level=0x010000dc
[177778.355497] CPU3 is up
[177778.360714] ACPI: Waking up from system sleep state S3
[177778.376890] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[177778.392855] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[177778.392938] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.408858] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.440792] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.456758] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.472720] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.472838] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.472907] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.472978] pci 0000:00:00.0: Found enabled HT MSI Mapping
[177778.504754] PM: noirq resume of devices complete after 143.894 msecs
[177778.504900] PM: early resume of devices complete after 0.097 msecs
[177778.505051] ehci-pci 0000:00:02.1: setting latency timer to 64
[177778.505059] ohci_hcd 0000:00:02.0: setting latency timer to 64
[177778.505064] pci 0000:00:04.0: setting latency timer to 64
[177778.505067] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[177778.505078] pata_amd 0000:00:06.0: setting latency timer to 64
[177778.505238] sata_nv 0000:00:08.0: setting latency timer to 64
[177778.505283] sata_nv 0000:00:08.1: setting latency timer to 64
[177778.505357] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[177778.506066] parport_pc 00:04: activated
[177778.506520] serial 00:07: activated
[177778.508120] ata6: port disabled--ignoring
[177778.524957] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[177778.527317] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[177778.527426] radeon 0000:02:00.0: WB enabled
[177778.527428] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[177778.527429] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[177778.543395] [drm] ring test on 0 succeeded in 1 usecs
[177778.543450] [drm] ring test on 3 succeeded in 1 usecs
[177778.543476] [drm] ib test on ring 0 succeeded in 0 usecs
[177778.543501] [drm] ib test on ring 3 succeeded in 1 usecs
[177778.668783] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[177778.668786] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[177778.668797] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[177778.684720] ata5.00: configured for UDMA/33
[177778.712114] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[177778.971557] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[177778.979670] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[177779.007891] ata1.00: configured for UDMA/133
[177779.008038] sd 0:0:0:0: [sda] Starting disk
[177779.065637] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[177779.065642] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[177779.237154] ata4: SATA link down (SStatus 0 SControl 300)
[177779.237183] ata2: SATA link down (SStatus 0 SControl 300)
[177779.247406] ata3: SATA link down (SStatus 0 SControl 300)
[177779.248074] PM: resume of devices complete after 744.882 msecs
[177780.244752] 4:3:1: cannot get freq at ep 0x86
[177780.408536] set resolution quirk: cval->res = 384
[177780.413877] Restarting tasks ... done.
[177780.735066] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[177780.735126] forcedeth 0000:00:07.0 eth0: MSI enabled
[182635.875007] PM: Syncing filesystems ... done.
[182636.220589] Freezing user space processes ... (elapsed 0.01 seconds) done.
[182636.235195] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[182636.251194] Suspending console(s) (use no_console_suspend to debug)
[182636.251687] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[182636.254614] serial 00:07: disabled
[182636.254618] serial 00:07: System wakeup disabled by ACPI
[182636.254719] parport_pc 00:04: disabled
[182636.282363] sd 0:0:0:0: [sda] Stopping disk
[182636.733975] PM: suspend of devices complete after 483.746 msecs
[182636.734243] PM: late suspend of devices complete after 0.264 msecs
[182636.749901] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[182636.765835] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[182636.781909] PM: noirq suspend of devices complete after 47.768 msecs
[182636.783202] ACPI: Preparing to enter system sleep state S3
[182637.181324] PM: Saving platform NVS memory
[182637.181619] Disabling non-boot CPUs ...
[182637.183013] smpboot: CPU 1 is now offline
[182637.183639] Broke affinity for irq 23
[182637.184649] smpboot: CPU 2 is now offline
[182637.185352] Broke affinity for irq 21
[182637.288587] smpboot: CPU 3 is now offline
[182637.290694] ACPI: Low-level resume complete
[182637.290759] PM: Restoring platform NVS memory
[182637.290834] PCI-DMA: Resuming GART IOMMU
[182637.290834] PCI-DMA: Restoring GART aperture settings
[182637.291661] LVT offset 0 assigned for vector 0xf9
[182637.291667] microcode: CPU0: new patch_level=0x010000dc
[182637.291689] Enabling non-boot CPUs ...
[182637.291752] smpboot: Booting Node 0 Processor 1 APIC 0x1
[182637.302676] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[182637.302677] perf: IBS APIC setup failed on cpu #1
[182637.304978] microcode: CPU1: new patch_level=0x010000dc
[182637.304981] CPU1 is up
[182637.305044] smpboot: Booting Node 0 Processor 2 APIC 0x2
[182637.315970] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[182637.315971] perf: IBS APIC setup failed on cpu #2
[182637.318287] microcode: CPU2: new patch_level=0x010000dc
[182637.318290] CPU2 is up
[182637.318378] smpboot: Booting Node 0 Processor 3 APIC 0x3
[182637.329301] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[182637.329302] perf: IBS APIC setup failed on cpu #3
[182637.331569] microcode: CPU3: new patch_level=0x010000dc
[182637.331572] CPU3 is up
[182637.336772] ACPI: Waking up from system sleep state S3
[182637.350620] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[182637.366586] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[182637.366669] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.382590] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.414533] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.430488] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.446451] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.446569] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.446638] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.446709] pci 0000:00:00.0: Found enabled HT MSI Mapping
[182637.478486] PM: noirq resume of devices complete after 141.577 msecs
[182637.478632] PM: early resume of devices complete after 0.098 msecs
[182637.478777] ehci-pci 0000:00:02.1: setting latency timer to 64
[182637.478785] ohci_hcd 0000:00:02.0: setting latency timer to 64
[182637.478790] pci 0000:00:04.0: setting latency timer to 64
[182637.478813] pata_amd 0000:00:06.0: setting latency timer to 64
[182637.478881] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[182637.478938] sata_nv 0000:00:08.1: setting latency timer to 64
[182637.478954] sata_nv 0000:00:08.0: setting latency timer to 64
[182637.479095] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[182637.479927] parport_pc 00:04: activated
[182637.480391] serial 00:07: activated
[182637.481769] ata6: port disabled--ignoring
[182637.498686] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[182637.501041] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[182637.501143] radeon 0000:02:00.0: WB enabled
[182637.501145] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[182637.501146] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[182637.517115] [drm] ring test on 0 succeeded in 1 usecs
[182637.517170] [drm] ring test on 3 succeeded in 1 usecs
[182637.517196] [drm] ib test on ring 0 succeeded in 0 usecs
[182637.517221] [drm] ib test on ring 3 succeeded in 1 usecs
[182637.642541] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[182637.642548] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[182637.642577] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[182637.658406] ata5.00: configured for UDMA/33
[182637.685844] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[182637.945239] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[182637.953371] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[182637.989726] ata1.00: configured for UDMA/133
[182637.989815] sd 0:0:0:0: [sda] Starting disk
[182638.039236] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[182638.039241] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[182638.210878] ata3: SATA link down (SStatus 0 SControl 300)
[182638.210893] ata2: SATA link down (SStatus 0 SControl 300)
[182638.221118] ata4: SATA link down (SStatus 0 SControl 300)
[182638.221757] PM: resume of devices complete after 744.833 msecs
[182639.222470] 4:3:2: cannot set freq 24000 to ep 0x86
[182639.379014] set resolution quirk: cval->res = 384
[182639.385787] Restarting tasks ... done.
[182639.954409] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[182639.954472] forcedeth 0000:00:07.0 eth0: MSI enabled
[187424.645748] PM: Syncing filesystems ... done.
[187425.128737] Freezing user space processes ... (elapsed 0.01 seconds) done.
[187425.143310] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[187425.159282] Suspending console(s) (use no_console_suspend to debug)
[187425.159763] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[187425.162383] sd 0:0:0:0: [sda] Stopping disk
[187425.162683] serial 00:07: disabled
[187425.162693] serial 00:07: System wakeup disabled by ACPI
[187425.162794] parport_pc 00:04: disabled
[187425.614114] PM: suspend of devices complete after 455.731 msecs
[187425.614394] PM: late suspend of devices complete after 0.277 msecs
[187425.630038] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
[187425.645975] ohci_hcd 0000:00:02.0: System wakeup enabled by ACPI
[187425.662049] PM: noirq suspend of devices complete after 47.757 msecs
[187425.663342] ACPI: Preparing to enter system sleep state S3
[187426.061472] PM: Saving platform NVS memory
[187426.061772] Disabling non-boot CPUs ...
[187426.062172] Broke affinity for irq 21
[187426.063187] smpboot: CPU 1 is now offline
[187426.063838] Broke affinity for irq 23
[187426.064848] smpboot: CPU 2 is now offline
[187426.066551] smpboot: CPU 3 is now offline
[187426.068533] ACPI: Low-level resume complete
[187426.068597] PM: Restoring platform NVS memory
[187426.068672] PCI-DMA: Resuming GART IOMMU
[187426.068672] PCI-DMA: Restoring GART aperture settings
[187426.069497] LVT offset 0 assigned for vector 0xf9
[187426.069503] microcode: CPU0: new patch_level=0x010000dc
[187426.069526] Enabling non-boot CPUs ...
[187426.069584] smpboot: Booting Node 0 Processor 1 APIC 0x1
[187426.080509] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[187426.080510] perf: IBS APIC setup failed on cpu #1
[187426.082815] microcode: CPU1: new patch_level=0x010000dc
[187426.082817] CPU1 is up
[187426.082880] smpboot: Booting Node 0 Processor 2 APIC 0x2
[187426.093805] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[187426.093806] perf: IBS APIC setup failed on cpu #2
[187426.096143] microcode: CPU2: new patch_level=0x010000dc
[187426.096146] CPU2 is up
[187426.096226] smpboot: Booting Node 0 Processor 3 APIC 0x3
[187426.107149] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[187426.107150] perf: IBS APIC setup failed on cpu #3
[187426.109383] microcode: CPU3: new patch_level=0x010000dc
[187426.109386] CPU3 is up
[187426.114608] ACPI: Waking up from system sleep state S3
[187426.131004] ohci_hcd 0000:00:02.0: System wakeup disabled by ACPI
[187426.146969] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
[187426.147052] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.162974] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.194907] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.210871] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.226835] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.226953] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.227021] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.227092] pci 0000:00:00.0: Found enabled HT MSI Mapping
[187426.258869] PM: noirq resume of devices complete after 144.115 msecs
[187426.259014] PM: early resume of devices complete after 0.096 msecs
[187426.259157] pci 0000:00:04.0: setting latency timer to 64
[187426.259191] pata_amd 0000:00:06.0: setting latency timer to 64
[187426.259320] ehci-pci 0000:00:02.1: setting latency timer to 64
[187426.259339] ohci_hcd 0000:00:02.0: setting latency timer to 64
[187426.259396] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[187426.259446] sata_nv 0000:00:08.0: setting latency timer to 64
[187426.259452] sata_nv 0000:00:08.1: setting latency timer to 64
[187426.259741] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[187426.260175] parport_pc 00:04: activated
[187426.260653] serial 00:07: activated
[187426.261958] ata6: port disabled--ignoring
[187426.279067] [drm] probing gen 2 caps for device 10de:3e8 = 1/0
[187426.281454] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[187426.281565] radeon 0000:02:00.0: WB enabled
[187426.281567] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88020d31bc00
[187426.281568] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88020d31bc0c
[187426.297536] [drm] ring test on 0 succeeded in 1 usecs
[187426.297592] [drm] ring test on 3 succeeded in 1 usecs
[187426.297617] [drm] ib test on ring 0 succeeded in 0 usecs
[187426.297641] [drm] ib test on ring 3 succeeded in 1 usecs
[187426.422934] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[187426.422941] ata5.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[187426.422969] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[187426.438772] ata5.00: configured for UDMA/33
[187426.466226] usb 1-3: reset high-speed USB device number 4 using ehci-pci
[187426.725657] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[187426.733750] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[187426.762307] ata1.00: configured for UDMA/133
[187426.762438] sd 0:0:0:0: [sda] Starting disk
[187426.819913] snd-usb-audio 1-3:1.2: no reset_resume for driver snd-usb-audio?
[187426.819918] snd-usb-audio 1-3:1.3: no reset_resume for driver snd-usb-audio?
[187426.991278] ata4: SATA link down (SStatus 0 SControl 300)
[187426.991283] ata2: SATA link down (SStatus 0 SControl 300)
[187427.001522] ata3: SATA link down (SStatus 0 SControl 300)
[187427.001671] PM: resume of devices complete after 744.364 msecs
[187427.998895] 4:3:1: cannot set freq 16000 to ep 0x86
[187428.161686] set resolution quirk: cval->res = 384
[187428.168365] Restarting tasks ... done.
[187428.547168] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[187428.547227] forcedeth 0000:00:07.0 eth0: MSI enabled