[   16.052296] init: isc-dhcp-server main process (1425) terminated with status 1
[   16.052410] init: isc-dhcp-server main process ended, respawning
[   16.096113] psmouse serio1: elantech: retrying ps2 command 0x54 (0).
[   16.148474] init: isc-dhcp-server main process (1437) terminated with status 1
[   16.148607] init: isc-dhcp-server main process ended, respawning
[   16.269231] init: isc-dhcp-server main process (1446) terminated with status 1
[   16.269335] init: isc-dhcp-server main process ended, respawning
[   16.344213] init: isc-dhcp-server main process (1453) terminated with status 1
[   16.344301] init: isc-dhcp-server main process ended, respawning
[   16.418151] init: isc-dhcp-server main process (1460) terminated with status 1
[   16.418249] init: isc-dhcp-server main process ended, respawning
[   16.498185] init: isc-dhcp-server main process (1467) terminated with status 1
[   16.498277] init: isc-dhcp-server main process ended, respawning
[   16.567865] init: isc-dhcp-server main process (1474) terminated with status 1
[   16.567954] init: isc-dhcp-server main process ended, respawning
[   16.600114] psmouse serio1: elantech: ps2 command 0x54 failed.
[   16.600130] psmouse serio1: elantech: failed to write register 0x10 with value 0x54.
[   16.600139] psmouse serio1: elantech: failed to initialise registers.
[   16.600148] psmouse serio1: elantech: failed to put touchpad into absolute mode.
[   16.650219] init: isc-dhcp-server main process (1481) terminated with status 1
[   16.650326] init: isc-dhcp-server main process ended, respawning
[   16.733385] init: isc-dhcp-server main process (1488) terminated with status 1
[   16.733477] init: isc-dhcp-server main process ended, respawning
[   16.829339] init: isc-dhcp-server main process (1497) terminated with status 1
[   16.829450] init: isc-dhcp-server respawning too fast, stopped
[   17.107682] input: ImPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   17.191669] wlan0: authenticate with 00:21:1c:fd:43:f2
[   17.203009] wlan0: send auth to 00:21:1c:fd:43:f2 (try 1/3)
[   17.205105] wlan0: authenticated
[   17.216089] wlan0: associate with 00:21:1c:fd:43:f2 (try 1/3)
[   17.221454] wlan0: RX AssocResp from 00:21:1c:fd:43:f2 (capab=0x431 status=0 aid=13)
[   17.221551] wlan0: associated
[   17.221646] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.221857] cfg80211: Calling CRDA for country: NO
[   17.243096] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   17.243107] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243113] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   17.243119] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243124] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   17.243129] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243134] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   17.243139] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243144] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   17.243150] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243155] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   17.243160] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243165] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   17.243171] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243175] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   17.243181] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243186] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   17.243191] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243196] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   17.243201] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243206] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   17.243212] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243217] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   17.243222] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243227] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   17.243233] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   17.243237] cfg80211: Disabling freq 2484 MHz
[   17.243250] ath: regdomain 0x8242 updated by CountryIE
[   17.243254] ath: EEPROM regdomain: 0x8242
[   17.243258] ath: EEPROM indicates we should expect a country code
[   17.243262] ath: doing EEPROM country->regdmn map search
[   17.243267] ath: country maps to regdmn code: 0x37
[   17.243271] ath: Country alpha2 being used: NO
[   17.243274] ath: Regpair used: 0x37
[   17.243334] cfg80211: Regulatory domain changed to country: NO
[   17.243337] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.243343] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.243348] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.243353] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.243357] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   17.427386] vboxdrv: Found 4 processor cores.
[   17.429541] vboxdrv: fAsync=0 offMin=0x1f8 offMax=0x5e9b
[   17.429787] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.429794] vboxdrv: Successfully loaded version 4.1.18_Ubuntu (interface 0x00190000).
[   17.477382] vboxpci: IOMMU not found (not registered)
[   19.995518] init: Failed to spawn setvtrgb main process: unable to execute: No such file or directory
[   20.013199] init: plymouth-stop pre-start process (3456) terminated with status 1
[   21.560100] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  136.680434] init: tty1 main process ended, respawning
[  136.699438] init: Failed to spawn setvtrgb main process: unable to execute: No such file or directory
[ 1237.464151] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[ 1237.602225] usb 1-1: New USB device found, idVendor=0951, idProduct=1607
[ 1237.602243] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1237.602254] usb 1-1: Product: DataTraveler 2.0
[ 1237.602265] usb 1-1: Manufacturer: Kingston
[ 1237.602274] usb 1-1: SerialNumber: 001372982A06BA71964201D5
[ 1237.630998] Initializing USB Mass Storage driver...
[ 1237.631659] scsi4 : usb-storage 1-1:1.0
[ 1237.632096] usbcore: registered new interface driver usb-storage
[ 1237.632104] USB Mass Storage support registered.
[ 1238.653875] scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 1238.657514] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1240.659377] sd 4:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 1240.661603] sd 4:0:0:0: [sdb] Write Protect is off
[ 1240.661625] sd 4:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 1240.663801] sd 4:0:0:0: [sdb] No Caching mode page present
[ 1240.663823] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1240.672714] sd 4:0:0:0: [sdb] No Caching mode page present
[ 1240.672730] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1240.690636]  sdb: sdb1
[ 1240.702827] sd 4:0:0:0: [sdb] No Caching mode page present
[ 1240.702843] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1240.702856] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1690.280373] usb 1-1: USB disconnect, device number 5
[ 2961.560856] atkbd serio0: Unknown key pressed (translated set 2, code 0x69 on isa0060/serio0).
[ 2961.560871] atkbd serio0: Use 'setkeycodes 69 <keycode>' to make it known.
[ 2961.561423] usb 1-8: USB disconnect, device number 4
[ 2961.561815] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[ 2961.561873] sierra 1-8:1.0: device disconnected
[ 2961.562178] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[ 2961.562220] sierra 1-8:1.1: device disconnected
[ 2961.562507] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[ 2961.562549] sierra 1-8:1.2: device disconnected
[ 2961.562891] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[ 2961.562937] sierra 1-8:1.3: device disconnected
[ 2961.563249] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[ 2961.563291] sierra 1-8:1.4: device disconnected
[ 2961.563457] sierra_net 1-8:1.7: wwan0: unregister 'sierra_net' usb-0000:00:1d.7-8, Sierra Wireless USB-to-WWAN Modem
[ 2961.579688] atkbd serio0: Unknown key released (translated set 2, code 0x69 on isa0060/serio0).
[ 2961.579699] atkbd serio0: Use 'setkeycodes 69 <keycode>' to make it known.
[ 2961.588204] sierra_net 1-8:1.7: (unregistered net_device): usb_control_msg failed, status -19
[ 2963.244709] atkbd serio0: Unknown key pressed (translated set 2, code 0x6a on isa0060/serio0).
[ 2963.244725] atkbd serio0: Use 'setkeycodes 6a <keycode>' to make it known.
[ 2963.264016] atkbd serio0: Unknown key released (translated set 2, code 0x6a on isa0060/serio0).
[ 2963.264031] atkbd serio0: Use 'setkeycodes 6a <keycode>' to make it known.
[ 2967.360126] usb 1-8: new high-speed USB device number 6 using ehci_hcd
[ 2967.493993] usb 1-8: config 1 has an invalid interface number: 7 but max is 5
[ 2967.494009] usb 1-8: config 1 has no interface number 5
[ 2967.496140] usb 1-8: New USB device found, idVendor=1199, idProduct=68a3
[ 2967.496156] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 2967.496169] usb 1-8: Product: MC7710
[ 2967.496183] usb 1-8: Manufacturer: Sierra Wireless, Incorporated
[ 2967.496197] usb 1-8: SerialNumber: 358178040141477
[ 2967.498643] sierra 1-8:1.0: Sierra USB modem converter detected
[ 2967.499493] usb 1-8: Sierra USB modem converter now attached to ttyUSB0
[ 2967.499848] sierra 1-8:1.1: Sierra USB modem converter detected
[ 2967.501100] usb 1-8: Sierra USB modem converter now attached to ttyUSB1
[ 2967.501418] sierra 1-8:1.2: Sierra USB modem converter detected
[ 2967.502164] usb 1-8: Sierra USB modem converter now attached to ttyUSB2
[ 2967.502583] sierra 1-8:1.3: Sierra USB modem converter detected
[ 2967.503424] usb 1-8: Sierra USB modem converter now attached to ttyUSB3
[ 2967.504502] sierra 1-8:1.4: Sierra USB modem converter detected
[ 2967.505345] usb 1-8: Sierra USB modem converter now attached to ttyUSB4
[ 2967.510076] sierra_net 1-8:1.7: wwan0: register 'sierra_net' at usb-0000:00:1d.7-8, Sierra Wireless USB-to-WWAN Modem, 72:f7:b1:32:02:07
[ 2988.267616] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
[ 3010.221043] wlan0: deauthenticating from 00:21:1c:fd:43:f2 by local choice (reason=3)
[ 3010.240783] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3010.240796] cfg80211: Restoring regulatory settings
[ 3010.240806] cfg80211: Calling CRDA to update world regulatory domain
[ 3010.365221] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3010.369110] cfg80211: World regulatory domain updated:
[ 3010.369123] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3010.369132] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3010.369139] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3010.369146] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3010.369153] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3010.369161] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3024.080553] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
[ 3024.298308] IPv6: ADDRCONF(NETDEV_CHANGE): wwan0: link becomes ready
[ 7210.098612] r8169 0000:04:00.0: eth0: link down
[ 7210.098873] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.223325] asus_wmi: Asus Management GUID not found
[ 7210.751167] PM: Syncing filesystems ... done.
[ 7210.780266] PM: Preparing system for mem sleep
[ 7211.136394] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 7211.156524] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 7211.172406] PM: Entering mem sleep
[ 7211.172549] Suspending console(s) (use no_console_suspend to debug)
[ 7211.173274] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7211.174310] sd 0:0:0:0: [sda] Stopping disk
[ 7211.756211] PM: suspend of devices complete after 583.418 msecs
[ 7211.756216] PM: suspend devices took 0.584 seconds
[ 7211.756500] PM: late suspend of devices complete after 0.278 msecs
[ 7211.756996] pcieport 0000:00:1c.3: wake-up capability enabled by ACPI
[ 7211.772173] pcieport 0000:00:1c.1: wake-up capability enabled by ACPI
[ 7211.820235] PM: noirq suspend of devices complete after 63.727 msecs
[ 7211.820271] ACPI: Preparing to enter system sleep state S3
[ 7211.820452] PM: Saving platform NVS memory
[ 7211.826305] Disabling non-boot CPUs ...
[ 7211.828202] smpboot: CPU 1 is now offline
[ 7211.932035] smpboot: CPU 2 is now offline
[ 7212.036036] smpboot: CPU 3 is now offline
[ 7212.036735] ACPI: Low-level resume complete
[ 7212.036735] PM: Restoring platform NVS memory
[ 7212.036735] Enabling non-boot CPUs ...
[ 7212.036735] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7211.828079] Initializing CPU#1
[ 7211.828079] Disabled fast string operations
[ 7212.052063] CPU1 is up
[ 7212.052276] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 7211.830690] Initializing CPU#2
[ 7211.830690] Disabled fast string operations
[ 7212.068058] CPU2 is up
[ 7212.068275] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7211.934392] Initializing CPU#3
[ 7211.934392] Disabled fast string operations
[ 7212.084052] CPU3 is up
[ 7212.087344] ACPI: Waking up from system sleep state S3
[ 7212.180199] pcieport 0000:00:1c.1: wake-up capability disabled by ACPI
[ 7212.196603] PM: noirq resume of devices complete after 109.046 msecs
[ 7212.196789] PM: early resume of devices complete after 0.109 msecs
[ 7212.196890] i915 0000:00:02.0: setting latency timer to 64
[ 7212.197012] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 7212.197183] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7212.197187] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7212.197234] usb usb3: root hub lost power or was reset
[ 7212.197237] usb usb2: root hub lost power or was reset
[ 7212.197272] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7212.197275] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 7212.197312] usb usb4: root hub lost power or was reset
[ 7212.197317] usb usb5: root hub lost power or was reset
[ 7212.197345] pci 0000:00:1e.0: setting latency timer to 64
[ 7212.197348] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7212.197374] ahci 0000:00:1f.2: setting latency timer to 64
[ 7212.197447] pcieport 0000:00:1c.3: wake-up capability disabled by ACPI
[ 7212.197472] usb usb6: root hub lost power or was reset
[ 7212.197478] usb usb7: root hub lost power or was reset
[ 7212.198077] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 7212.198114] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 7212.198136] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7212.198163] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 7212.198185] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 7212.324436] r8169 0000:04:00.0: eth0: link down
[ 7212.520183] ata2: SATA link down (SStatus 0 SControl 300)
[ 7212.564181] usb 1-2: reset high-speed USB device number 2 using ehci_hcd
[ 7212.692102] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7212.692989] ata1.00: unexpected _GTF length (4)
[ 7212.693766] ata1.00: unexpected _GTF length (4)
[ 7212.693927] ata1.00: configured for UDMA/133
[ 7212.708235] sd 0:0:0:0: [sda] Starting disk
[ 7212.808188] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[ 7212.961192] PM: resume of devices complete after 764.393 msecs
[ 7212.961421] PM: resume devices took 0.764 seconds
[ 7212.961540] PM: Finishing wakeup.
[ 7212.961750] usb 1-8: USB disconnect, device number 6
[ 7212.972245] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[ 7212.972329] sierra 1-8:1.0: device disconnected
[ 7212.973041] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[ 7212.973139] sierra 1-8:1.1: device disconnected
[ 7212.973896] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[ 7212.973972] sierra 1-8:1.2: device disconnected
[ 7212.961544] Restarting tasks ... done.
[ 7212.975506] video LNXVIDEO:00: Restoring backlight state
[ 7212.975966] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[ 7212.976098] sierra 1-8:1.3: device disconnected
[ 7212.976729] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[ 7212.976801] sierra 1-8:1.4: device disconnected
[ 7212.977056] sierra_net 1-8:1.7: wwan0: unregister 'sierra_net' usb-0000:00:1d.7-8, Sierra Wireless USB-to-WWAN Modem
[ 7213.100126] sierra_net 1-8:1.7: (unregistered net_device): usb_control_msg failed, status -19
[ 7214.172064] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x020030)
[ 7214.221463] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 7214.448626] psmouse serio1: elantech: retrying ps2 command 0x54 (2).
[ 7215.180156] psmouse serio1: elantech: retrying ps2 command 0x54 (1).
[ 7215.808113] usb 1-8: new high-speed USB device number 7 using ehci_hcd
[ 7215.884342] psmouse serio1: elantech: retrying ps2 command 0x54 (0).
[ 7215.950018] usb 1-8: config 1 has an invalid interface number: 7 but max is 5
[ 7215.950031] usb 1-8: config 1 has no interface number 5
[ 7215.952097] usb 1-8: New USB device found, idVendor=1199, idProduct=68a3
[ 7215.952110] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 7215.952118] usb 1-8: Product: MC7710
[ 7215.952127] usb 1-8: Manufacturer: Sierra Wireless, Incorporated
[ 7215.952135] usb 1-8: SerialNumber: 358178040141477
[ 7215.954482] sierra 1-8:1.0: Sierra USB modem converter detected
[ 7215.955251] usb 1-8: Sierra USB modem converter now attached to ttyUSB0
[ 7215.955593] sierra 1-8:1.1: Sierra USB modem converter detected
[ 7215.957106] usb 1-8: Sierra USB modem converter now attached to ttyUSB1
[ 7215.957460] sierra 1-8:1.2: Sierra USB modem converter detected
[ 7215.958258] usb 1-8: Sierra USB modem converter now attached to ttyUSB2
[ 7215.958596] sierra 1-8:1.3: Sierra USB modem converter detected
[ 7215.959376] usb 1-8: Sierra USB modem converter now attached to ttyUSB3
[ 7215.959808] sierra 1-8:1.4: Sierra USB modem converter detected
[ 7215.961132] usb 1-8: Sierra USB modem converter now attached to ttyUSB4
[ 7215.964927] sierra_net 1-8:1.7: wwan0: register 'sierra_net' at usb-0000:00:1d.7-8, Sierra Wireless USB-to-WWAN Modem, 72:f7:b1:32:03:07
[ 7216.388413] psmouse serio1: elantech: ps2 command 0x54 failed.
[ 7216.388437] psmouse serio1: elantech: failed to write register 0x10 with value 0x54.
[ 7216.388448] psmouse serio1: elantech: failed to initialise registers.
[ 7216.388457] psmouse serio1: elantech: failed to put touchpad into absolute mode.
[ 7216.900362] input: ImPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 7237.258763] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
[ 7242.658089] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7243.558359] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 7244.365580] atkbd serio0: Unknown key pressed (translated set 2, code 0x69 on isa0060/serio0).
[ 7244.365594] atkbd serio0: Use 'setkeycodes 69 <keycode>' to make it known.
[ 7244.366677] usb 1-8: USB disconnect, device number 7
[ 7244.367213] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[ 7244.367349] sierra 1-8:1.0: device disconnected
[ 7244.367921] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[ 7244.367992] sierra 1-8:1.1: device disconnected
[ 7244.368643] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[ 7244.368725] sierra 1-8:1.2: device disconnected
[ 7244.369796] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[ 7244.369873] sierra 1-8:1.3: device disconnected
[ 7244.370444] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[ 7244.370519] sierra 1-8:1.4: device disconnected
[ 7244.370832] sierra_net 1-8:1.7: wwan0: unregister 'sierra_net' usb-0000:00:1d.7-8, Sierra Wireless USB-to-WWAN Modem
[ 7244.384366] atkbd serio0: Unknown key released (translated set 2, code 0x69 on isa0060/serio0).
[ 7244.384380] atkbd serio0: Use 'setkeycodes 69 <keycode>' to make it known.
[ 7244.396154] sierra_net 1-8:1.7: (unregistered net_device): usb_control_msg failed, status -19
[ 7244.854668] wlan0: authenticate with 50:67:f0:f6:80:e4
[ 7244.876129] wlan0: send auth to 50:67:f0:f6:80:e4 (try 1/3)
[ 7244.885000] wlan0: authenticated
[ 7244.896082] wlan0: associate with 50:67:f0:f6:80:e4 (try 1/3)
[ 7244.900797] wlan0: RX AssocResp from 50:67:f0:f6:80:e4 (capab=0xc11 status=0 aid=2)
[ 7244.900996] wlan0: associated
[ 7244.901118] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7244.901416] cfg80211: Calling CRDA for country: NO
[ 7244.934747] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934771] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934779] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934785] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934792] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934799] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934805] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934813] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934819] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934827] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934833] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934840] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934847] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934854] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934860] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934868] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934876] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934883] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934890] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934896] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934903] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934910] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934918] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934925] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934932] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 7244.934939] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7244.934946] cfg80211: Disabling freq 2484 MHz
[ 7244.934967] ath: regdomain 0x8242 updated by CountryIE
[ 7244.934973] ath: EEPROM regdomain: 0x8242
[ 7244.934978] ath: EEPROM indicates we should expect a country code
[ 7244.934985] ath: doing EEPROM country->regdmn map search
[ 7244.934992] ath: country maps to regdmn code: 0x37
[ 7244.934998] ath: Country alpha2 being used: NO
[ 7244.935003] ath: Regpair used: 0x37
[ 7244.935080] cfg80211: Regulatory domain changed to country: NO
[ 7244.935088] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7244.935095] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7244.935103] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7244.935110] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7244.935117] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 7270.868902] show_signal_msg: 69 callbacks suppressed
[ 7270.868917] soffice.bin[431]: segfault at 10 ip b5894f07 sp bfafa700 error 4 in libgio-2.0.so.0.3400.0[b57f0000+15b000]
[ 7272.230638] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 7285.160154] atkbd serio0: Unknown key pressed (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.160167] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.228858] atkbd serio0: Unknown key released (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.228871] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.339350] atkbd serio0: Unknown key pressed (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.339361] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.438587] atkbd serio0: Unknown key released (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.438600] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.569679] atkbd serio0: Unknown key pressed (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.569693] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.623250] atkbd serio0: Unknown key released (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.623265] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.728092] atkbd serio0: Unknown key pressed (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.728107] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.802981] atkbd serio0: Unknown key released (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.802994] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.904024] atkbd serio0: Unknown key pressed (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.904024] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7285.987808] atkbd serio0: Unknown key released (translated set 2, code 0x65 on isa0060/serio0).
[ 7285.987823] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7286.108751] atkbd serio0: Unknown key pressed (translated set 2, code 0x65 on isa0060/serio0).
[ 7286.108762] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[ 7286.192695] atkbd serio0: Unknown key released (translated set 2, code 0x65 on isa0060/serio0).
[ 7286.192712] atkbd serio0: Use 'setkeycodes 65 <keycode>' to make it known.
[13163.015374] [Firmware Bug]: battery: (dis)charge rate invalid.
[13744.299497] ------------[ cut here ]------------
[13744.299527] WARNING: at /home/apw/COD/linux/arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0xb1/0xf0()
[13744.299539] Hardware name: T1005
[13744.299544] empty IPI mask
[13744.299550] Modules linked in: nls_iso8859_1 usb_storage pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) dm_crypt joydev sparse_keymap dm_multipath scsi_dh coretemp hid_multitouch sierra_net usbnet microcode sierra usbserial psmouse serio_raw snd_hda_codec_realtek lpc_ich snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi arc4 snd_seq_midi_event snd_seq rfcomm bnep snd_timer bluetooth parport_pc ath9k snd_seq_device ppdev mac80211 ath9k_common snd mac_hid ath9k_hw ath cfg80211 soundcore snd_page_alloc binfmt_misc lp parport dm_mirror dm_region_hash dm_log usbhid hid r8169 wmi i915 drm_kms_helper drm i2c_algo_bit video
[13744.299787] Pid: 10879, comm: Chrome_IOThread Tainted: G           O 3.6.0-030600rc6-generic #201209161835
[13744.299796] Call Trace:
[13744.299814]  [<c10493a2>] warn_slowpath_common+0x72/0xa0
[13744.299830]  [<c10326b1>] ? default_send_IPI_mask_logical+0xb1/0xf0
[13744.299842]  [<c10326b1>] ? default_send_IPI_mask_logical+0xb1/0xf0
[13744.299861]  [<c1049473>] warn_slowpath_fmt+0x33/0x40
[13744.299877]  [<c10326b1>] default_send_IPI_mask_logical+0xb1/0xf0
[13744.299896]  [<c1030695>] native_send_call_func_ipi+0x45/0x60
[13744.299914]  [<c10a3c4e>] smp_call_function_many+0x16e/0x200
[13744.299929]  [<c1042020>] ? leave_mm+0x40/0x40
[13744.299947]  [<c104214b>] native_flush_tlb_others+0x2b/0x30
[13744.299962]  [<c10423b0>] flush_tlb_page+0x50/0xa0
[13744.299977]  [<c11398ec>] ptep_clear_flush+0x3c/0x50
[13744.299994]  [<c112ae04>] do_wp_page+0x264/0x7f0
[13744.300082]  [<c10308f5>] ? smp_call_function_interrupt+0x35/0x40
[13744.300100]  [<c10420b0>] ? flush_tlb_func+0x90/0xb0
[13744.300114]  [<c112cfc7>] handle_pte_fault+0x267/0x2c0
[13744.300132]  [<c112dc5a>] handle_mm_fault+0x1da/0x280
[13744.300151]  [<c15e6c5b>] do_page_fault+0x15b/0x490
[13744.300168]  [<c10420b0>] ? flush_tlb_func+0x90/0xb0
[13744.300183]  [<c10a3f50>] ? generic_smp_call_function_interrupt+0xe0/0x180
[13744.300201]  [<c12d7780>] ? copy_to_user+0x40/0x60
[13744.300213]  [<c15e6b00>] ? vmalloc_fault+0x190/0x190
[13744.300224]  [<c15e3f33>] error_code+0x67/0x6c
[13744.300236]  [<c15e0000>] ? set_rps_cpu+0x88/0xcf
[13744.300243] ---[ end trace e2e04c5eec7bea84 ]---
[16339.190108] wlan0: deauthenticating from 50:67:f0:f6:80:e4 by local choice (reason=3)
[16339.247618] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.247646] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.247658] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.247667] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.247675] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.247682] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.247692] ath: phy0: TX while HW is in FULL_SLEEP mode
[16339.272070] cfg80211: All devices are disconnected, going to restore regulatory settings
[16339.272086] cfg80211: Restoring regulatory settings
[16339.272118] cfg80211: Calling CRDA to update world regulatory domain
[16339.356972] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[16339.360685] cfg80211: World regulatory domain updated:
[16339.360696] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16339.360705] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16339.360713] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16339.360721] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16339.360729] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16339.360737] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16340.076789] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16340.157475] r8169 0000:04:00.0: eth0: link down
[16340.157816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[16340.784811] PM: Syncing filesystems ... done.
[16340.827225] PM: Preparing system for mem sleep
[16341.049025] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[16341.251168] Freezing user space processes ... (elapsed 0.03 seconds) done.
[16341.288599] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16341.304494] PM: Entering mem sleep
[16341.304646] Suspending console(s) (use no_console_suspend to debug)
[16341.321279] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[16341.321589] sd 0:0:0:0: [sda] Stopping disk
[16341.900224] PM: suspend of devices complete after 595.347 msecs
[16341.900229] PM: suspend devices took 0.596 seconds
[16341.900492] PM: late suspend of devices complete after 0.257 msecs
[16341.900970] pcieport 0000:00:1c.3: wake-up capability enabled by ACPI
[16341.916183] pcieport 0000:00:1c.1: wake-up capability enabled by ACPI
[16341.964451] PM: noirq suspend of devices complete after 63.951 msecs
[16341.964488] ACPI: Preparing to enter system sleep state S3
[16341.964668] PM: Saving platform NVS memory
[16341.970513] Disabling non-boot CPUs ...
[16341.972338] smpboot: CPU 1 is now offline
[16342.076039] smpboot: CPU 2 is now offline
[16342.180033] smpboot: CPU 3 is now offline
[16342.180773] ACPI: Low-level resume complete
[16342.180773] PM: Restoring platform NVS memory
[16342.180773] Enabling non-boot CPUs ...
[16342.180773] smpboot: Booting Node 0 Processor 1 APIC 0x1
[16341.972025] Initializing CPU#1
[16341.972025] Disabled fast string operations
[16342.196070] CPU1 is up
[16342.196294] smpboot: Booting Node 0 Processor 2 APIC 0x2
[16341.974789] Initializing CPU#2
[16341.974789] Disabled fast string operations
[16342.212048] CPU2 is up
[16342.212230] smpboot: Booting Node 0 Processor 3 APIC 0x3
[16342.078363] Initializing CPU#3
[16342.078363] Disabled fast string operations
[16342.228057] CPU3 is up
[16342.231242] ACPI: Waking up from system sleep state S3
[16342.324199] pcieport 0000:00:1c.1: wake-up capability disabled by ACPI
[16342.340587] PM: noirq resume of devices complete after 109.136 msecs
[16342.340765] PM: early resume of devices complete after 0.101 msecs
[16342.340845] i915 0000:00:02.0: setting latency timer to 64
[16342.340939] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[16342.340983] usb usb2: root hub lost power or was reset
[16342.341004] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[16342.341018] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[16342.341055] usb usb3: root hub lost power or was reset
[16342.341086] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[16342.341124] usb usb4: root hub lost power or was reset
[16342.341154] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[16342.341195] usb usb5: root hub lost power or was reset
[16342.341206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[16342.341223] pci 0000:00:1e.0: setting latency timer to 64
[16342.341250] ahci 0000:00:1f.2: setting latency timer to 64
[16342.341329] usb usb6: root hub lost power or was reset
[16342.341334] pcieport 0000:00:1c.3: wake-up capability disabled by ACPI
[16342.341337] usb usb7: root hub lost power or was reset
[16342.341915] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[16342.341943] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[16342.341967] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[16342.341995] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[16342.342017] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[16342.452491] r8169 0000:04:00.0: eth0: link down
[16342.664191] ata2: SATA link down (SStatus 0 SControl 300)
[16342.712129] usb 1-2: reset high-speed USB device number 2 using ehci_hcd
[16342.836129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[16342.836989] ata1.00: unexpected _GTF length (4)
[16342.837772] ata1.00: unexpected _GTF length (4)
[16342.837932] ata1.00: configured for UDMA/133
[16342.852271] sd 0:0:0:0: [sda] Starting disk
[16342.956161] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[16343.156143] PM: resume of devices complete after 815.368 msecs
[16343.156360] PM: resume devices took 0.816 seconds
[16343.156480] PM: Finishing wakeup.
[16343.156484] Restarting tasks ... done.
[16343.180705] video LNXVIDEO:00: Restoring backlight state
[16344.277126] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x020030)
[16344.328906] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x02, 0x64.
[16344.552112] psmouse serio1: elantech: retrying ps2 command 0x54 (2).
[16344.728853] wlan0: authenticate with 50:67:f0:f6:80:e4
[16344.739858] wlan0: send auth to 50:67:f0:f6:80:e4 (try 1/3)
[16344.741911] wlan0: authenticated
[16344.754838] wlan0: associating with AP with corrupt beacon
[16344.756097] wlan0: associate with 50:67:f0:f6:80:e4 (try 1/3)
[16344.760196] wlan0: RX AssocResp from 50:67:f0:f6:80:e4 (capab=0xc11 status=0 aid=2)
[16344.760405] wlan0: associated
[16344.760516] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16344.760811] cfg80211: Calling CRDA for country: NO
[16344.813576] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[16344.813591] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813599] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[16344.813607] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813615] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[16344.813623] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813631] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[16344.813638] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813645] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[16344.813653] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813660] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[16344.813668] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813675] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[16344.813682] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813690] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[16344.813698] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813705] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[16344.813713] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813720] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[16344.813728] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813736] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[16344.813744] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813750] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[16344.813757] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813763] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[16344.813770] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[16344.813776] cfg80211: Disabling freq 2484 MHz
[16344.813793] ath: regdomain 0x8242 updated by CountryIE
[16344.813798] ath: EEPROM regdomain: 0x8242
[16344.813803] ath: EEPROM indicates we should expect a country code
[16344.813809] ath: doing EEPROM country->regdmn map search
[16344.813815] ath: country maps to regdmn code: 0x37
[16344.813820] ath: Country alpha2 being used: NO
[16344.813825] ath: Regpair used: 0x37
[16344.813893] cfg80211: Regulatory domain changed to country: NO
[16344.813899] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16344.813906] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[16344.813912] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[16344.813919] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[16344.813926] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[16345.256111] psmouse serio1: elantech: retrying ps2 command 0x54 (1).
[16345.960174] psmouse serio1: elantech: retrying ps2 command 0x54 (0).
[16346.464088] psmouse serio1: elantech: ps2 command 0x54 failed.
[16346.464105] psmouse serio1: elantech: failed to write register 0x10 with value 0x54.
[16346.464115] psmouse serio1: elantech: failed to initialise registers.
[16346.464124] psmouse serio1: elantech: failed to put touchpad into absolute mode.
[16346.969957] input: ImPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[16412.276101] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0