[ 0.000000] Linux version 2.6.24-12-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 22:31:43 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] Command line: root=UUID=7c2398c5-2eb3-47c9-acec-2b690277a994 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d5a0000 (usable) [ 0.000000] BIOS-e820: 000000007d5a0000 - 000000007d5ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000007d5ae000 - 000000007d5f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d5f0000 - 000000007d600000 (reserved) [ 0.000000] BIOS-e820: 00000000fed90000 - 00000000fed94000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa70000 - 00000000ffa71000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 513440) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F95E0 checksum 0 [ 0.000000] ACPI: RSDP 000F95E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7D5A0000, 0048 (r1 101607 RSDT1326 20071016 MSFT 97) [ 0.000000] ACPI: FACP 7D5A0200, 0084 (r2 101607 FACP1326 20071016 MSFT 97) [ 0.000000] ACPI: DSDT 7D5A0490, 687F (r1 VVBLI9 VVBLI961 61 INTL 20051117) [ 0.000000] ACPI: FACS 7D5AE000, 0040 [ 0.000000] ACPI: APIC 7D5A0390, 006C (r1 101607 APIC1326 20071016 MSFT 97) [ 0.000000] ACPI: MCFG 7D5A0450, 003C (r1 101607 OEMMCFG 20071016 MSFT 97) [ 0.000000] ACPI: OEMB 7D5AE040, 008A (r1 101607 OEMB1326 20071016 MSFT 97) [ 0.000000] ACPI: ASF! 7D5A6D10, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) [ 0.000000] ACPI: GSCI 7D5AE0D0, 2024 (r1 101607 GMCHSCI 20071016 MSFT 97) [ 0.000000] ACPI: iEIT 7D5B0100, 00B0 (r1 101607 EITTABLE 20071016 MSFT 97) [ 0.000000] ACPI: DMAR 7D5A6DB0, 0170 (r1 101607 OEMDMAR 1 MSFT 97) [ 0.000000] ACPI: SSDT 7D5B1610, 0877 (r1 DpgPmm CpuPm 12 INTL 20051117) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007d5a0000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 513440) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007d5a0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 513440 [ 0.000000] On node 0 totalpages: 513341 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1210 pages reserved [ 0.000000] DMA zone: 2731 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6963 pages used for memmap [ 0.000000] DMA32 zone: 502381 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] Processor #2 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] Processor #3 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7d600000:81790000) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 505112 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=7c2398c5-2eb3-47c9-acec-2b690277a994 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 100.152572] time.c: Detected 2660.039 MHz processor. [ 100.153822] Console: colour VGA+ 80x25 [ 100.153825] console [tty0] enabled [ 100.153837] Checking aperture... [ 100.153848] Calgary: detecting Calgary via BIOS EBDA area [ 100.153849] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 100.168725] Memory: 2011952k/2053760k available (2466k kernel code, 41412k reserved, 1310k data, 316k init) [ 100.168751] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 100.246329] Calibrating delay using timer specific routine.. 5324.46 BogoMIPS (lpj=10648928) [ 100.246353] Security Framework initialized [ 100.246358] SELinux: Disabled at boot. [ 100.246366] AppArmor: AppArmor initialized [ 100.246369] Failure registering capabilities with primary security module. [ 100.246511] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 100.247479] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 100.247929] Mount-cache hash table entries: 256 [ 100.248021] CPU: L1 I cache: 32K, L1 D cache: 32K [ 100.248022] CPU: L2 cache: 6144K [ 100.248024] CPU 0/0 -> Node 0 [ 100.248025] using mwait in idle threads. [ 100.248026] CPU: Physical Processor ID: 0 [ 100.248027] CPU: Processor Core ID: 0 [ 100.248033] CPU0: Thermal monitoring enabled (TM2) [ 100.248042] SMP alternatives: switching to UP code [ 100.248703] Early unpacking initramfs... done [ 100.525653] ACPI: Core revision 20070126 [ 100.525685] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 100.568618] Using local APIC timer interrupts. [ 100.606121] APIC timer calibration result 20781549 [ 100.606122] Detected 20.781 MHz APIC timer. [ 100.606188] SMP alternatives: switching to SMP code [ 100.606770] Booting processor 1/4 APIC 0x1 [ 100.617376] Initializing CPU#1 [ 100.693918] Calibrating delay using timer specific routine.. 5320.11 BogoMIPS (lpj=10640220) [ 100.693923] CPU: L1 I cache: 32K, L1 D cache: 32K [ 100.693924] CPU: L2 cache: 6144K [ 100.693925] CPU 1/1 -> Node 0 [ 100.693927] CPU: Physical Processor ID: 0 [ 100.693928] CPU: Processor Core ID: 1 [ 100.693932] CPU1: Thermal monitoring enabled (TM2) [ 100.694619] Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 06 [ 100.694661] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 100.714677] SMP alternatives: switching to SMP code [ 100.715277] Booting processor 2/4 APIC 0x2 [ 100.725881] Initializing CPU#2 [ 100.805640] Calibrating delay using timer specific routine.. 5320.12 BogoMIPS (lpj=10640253) [ 100.805644] CPU: L1 I cache: 32K, L1 D cache: 32K [ 100.805645] CPU: L2 cache: 6144K [ 100.805647] CPU 2/2 -> Node 0 [ 100.805648] CPU: Physical Processor ID: 0 [ 100.805648] CPU: Processor Core ID: 2 [ 100.805653] CPU2: Thermal monitoring enabled (TM2) [ 100.806338] Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 06 [ 100.806349] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 100.826348] SMP alternatives: switching to SMP code [ 100.826750] Booting processor 3/4 APIC 0x3 [ 100.837353] Initializing CPU#3 [ 100.917361] Calibrating delay using timer specific routine.. 5320.12 BogoMIPS (lpj=10640253) [ 100.917366] CPU: L1 I cache: 32K, L1 D cache: 32K [ 100.917367] CPU: L2 cache: 6144K [ 100.917368] CPU 3/3 -> Node 0 [ 100.917369] CPU: Physical Processor ID: 0 [ 100.917370] CPU: Processor Core ID: 3 [ 100.917375] CPU3: Thermal monitoring enabled (TM2) [ 100.918059] Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 06 [ 100.918137] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 100.938100] Brought up 4 CPUs [ 100.938194] CPU0 attaching sched-domain: [ 100.938195] domain 0: span 03 [ 100.938196] groups: 01 02 [ 100.938198] domain 1: span 0f [ 100.938199] groups: 03 0c [ 100.938200] domain 2: span 0f [ 100.938202] groups: 0f [ 100.938203] CPU1 attaching sched-domain: [ 100.938204] domain 0: span 03 [ 100.938205] groups: 02 01 [ 100.938206] domain 1: span 0f [ 100.938207] groups: 03 0c [ 100.938208] domain 2: span 0f [ 100.938209] groups: 0f [ 100.938210] CPU2 attaching sched-domain: [ 100.938211] domain 0: span 0c [ 100.938212] groups: 04 08 [ 100.938214] domain 1: span 0f [ 100.938215] groups: 0c 03 [ 100.938216] domain 2: span 0f [ 100.938217] groups: 0f [ 100.938218] CPU3 attaching sched-domain: [ 100.938219] domain 0: span 0c [ 100.938220] groups: 08 04 [ 100.938221] domain 1: span 0f [ 100.938222] groups: 0c 03 [ 100.938224] domain 2: span 0f [ 100.938225] groups: 0f [ 100.938447] net_namespace: 120 bytes [ 100.938738] Time: 21:56:55 Date: 03/27/08 [ 100.938771] NET: Registered protocol family 16 [ 100.938901] ACPI: bus type pci registered [ 100.938951] PCI: Using configuration type 1 [ 100.942213] ACPI: EC: Look up EC in DSDT [ 100.946293] ACPI: BIOS _OSI(Linux) query ignored [ 100.946294] ACPI: DMI System Vendor: To Be Filled By O.E.M. [ 100.946295] ACPI: DMI Product Name: To Be Filled By O.E.M. [ 100.946296] ACPI: DMI Product Version: To Be Filled By O.E.M. [ 100.946297] ACPI: DMI Board Name: To be filled by O.E.M. [ 100.946298] ACPI: DMI BIOS Vendor: American Megatrends Inc. [ 100.946299] ACPI: DMI BIOS Date: 10/16/2007 [ 100.946300] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 100.946301] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 100.946506] ACPI: Interpreter enabled [ 100.946513] ACPI: (supports S0 S1 S3 S4 S5) [ 100.946527] ACPI: Using IOAPIC for interrupt routing [ 100.946672] Error attaching device data [ 100.946700] Error attaching device data [ 100.946728] Error attaching device data [ 100.946758] Error attaching device data [ 100.953677] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 100.954850] PCI: Transparent bridge - 0000:00:1e.0 [ 100.954871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 100.954999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 100.971691] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) [ 100.971791] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 100.971889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15) [ 100.971988] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12 14 15) [ 100.972088] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 12 14 15) [ 100.972187] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 12 14 15) [ 100.972285] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) [ 100.972383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12 14 15) [ 100.972472] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 23, should be 18 [20070126] [ 100.972482] ACPI Warning (tbutils-0217): Incorrect checksum in table [iEIT] - 6D, should be 86 [20070126] [ 100.972488] Linux Plug and Play Support v0.97 (c) Adam Belay [ 100.972507] pnp: PnP ACPI init [ 100.972512] ACPI: bus type pnp registered [ 100.976222] pnp: PnP ACPI: found 22 devices [ 100.976223] ACPI: ACPI bus type pnp unregistered [ 100.976376] PCI: Using ACPI for IRQ routing [ 100.976378] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 100.985235] NET: Registered protocol family 8 [ 100.985237] NET: Registered protocol family 20 [ 100.985264] PCI-GART: No AMD northbridge found. [ 100.985289] AppArmor: AppArmor Filesystem Enabled [ 100.989184] Time: tsc clocksource has been installed. [ 100.997194] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 100.997202] system 00:0a: ioport range 0xa20-0xa3f has been reserved [ 100.997204] system 00:0a: ioport range 0xa00-0xa0f has been reserved [ 100.997206] system 00:0a: ioport range 0xa10-0xa1f has been reserved [ 100.997208] system 00:0a: ioport range 0xa40-0xa5f has been reserved [ 100.997212] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 100.997214] system 00:0b: ioport range 0x800-0x87f has been reserved [ 100.997216] system 00:0b: ioport range 0x480-0x4bf has been reserved [ 100.997219] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 100.997221] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 100.997225] system 00:0d: iomem range 0xffc00000-0xffefffff could not be reserved [ 100.997230] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved [ 100.997232] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved [ 100.997240] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 100.997244] system 00:10: iomem range 0xffa70000-0xffa70fff could not be reserved [ 100.997249] system 00:11: iomem range 0xfed90000-0xfed90fff could not be reserved [ 100.997253] system 00:12: iomem range 0xfed91000-0xfed91fff could not be reserved [ 100.997257] system 00:13: iomem range 0xfed92000-0xfed92fff could not be reserved [ 100.997261] system 00:14: iomem range 0xfed93000-0xfed93fff could not be reserved [ 100.997266] system 00:15: iomem range 0x0-0x9ffff could not be reserved [ 100.997268] system 00:15: iomem range 0xc0000-0xcffff has been reserved [ 100.997270] system 00:15: iomem range 0xe0000-0xfffff could not be reserved [ 100.997272] system 00:15: iomem range 0x100000-0x7d5fffff could not be reserved [ 100.997274] system 00:15: iomem range 0x0-0x0 could not be reserved [ 100.997530] PCI: Bridge: 0000:00:1e.0 [ 100.997532] IO window: disabled. [ 100.997536] MEM window: disabled. [ 100.997540] PREFETCH window: disabled. [ 100.997555] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 100.997561] NET: Registered protocol family 2 [ 101.033162] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 101.033613] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 101.034604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 101.034890] TCP: Hash tables configured (established 262144 bind 65536) [ 101.034891] TCP reno registered [ 101.045176] checking if image is initramfs... it is [ 101.496684] Switched to high resolution mode on CPU 1 [ 101.496701] Switched to high resolution mode on CPU 2 [ 101.496768] Switched to high resolution mode on CPU 3 [ 101.499915] Switched to high resolution mode on CPU 0 [ 101.590260] Freeing initrd memory: 8212k freed [ 101.594316] audit: initializing netlink socket (disabled) [ 101.594326] audit(1206655016.364:1): initialized [ 101.597017] VFS: Disk quotas dquot_6.5.1 [ 101.597085] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 101.597188] io scheduler noop registered [ 101.597189] io scheduler anticipatory registered [ 101.597191] io scheduler deadline registered [ 101.597308] io scheduler cfq registered (default) [ 101.597314] Boot video device is 0000:00:02.0 [ 101.633047] Real Time Clock Driver v1.12ac [ 101.633167] Linux agpgart interface v0.102 [ 101.633168] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 101.633319] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 101.633475] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 101.633966] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 101.634190] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 101.634324] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 101.634402] 0000:00:03.3: ttyS2 at I/O 0xe000 (irq = 17) is a 16550A [ 101.635235] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 101.635298] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 101.635403] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 101.635405] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 101.635944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 101.645058] mice: PS/2 mouse device common for all mice [ 101.645095] cpuidle: using governor ladder [ 101.645097] cpuidle: using governor menu [ 101.645214] NET: Registered protocol family 1 [ 101.645247] registered taskstats version 1 [ 101.645328] Magic number: 0:131:956 [ 101.645335] hash matches device ptyzd [ 101.645347] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 101.645349] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 101.645350] EDD information not available. [ 101.645358] Freeing unused kernel memory: 316k freed [ 101.670512] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 102.778819] fuse init (API version 7.9) [ 102.792000] ACPI: SSDT 7D5B01B0, 0317 (r1 DpgPmm P001Ist 11 INTL 20051117) [ 102.792376] ACPI: SSDT 7D5B0720, 0317 (r1 DpgPmm P002Ist 12 INTL 20051117) [ 102.792732] ACPI: SSDT 7D5B0C90, 0261 (r1 DpgPmm P003Ist 12 INTL 20051117) [ 102.793082] ACPI: SSDT 7D5B1150, 0261 (r1 DpgPmm P004Ist 12 INTL 20051117) [ 102.867211] SCSI subsystem initialized [ 102.874088] libata version 3.00 loaded. [ 102.874800] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 102.874828] PCI: Setting latency timer of device 0000:00:03.2 to 64 [ 102.874835] ACPI: PCI interrupt for device 0000:00:03.2 disabled [ 102.874866] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 102.874882] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 102.874889] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 102.874908] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 [ 102.874923] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 102.874931] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 102.959565] usbcore: registered new interface driver usbfs [ 102.959579] usbcore: registered new interface driver hub [ 102.961045] usbcore: registered new device driver usb [ 102.961073] ata_piix 0000:00:1f.2: version 2.12 [ 102.961079] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 102.961099] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 102.961129] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 102.966258] scsi0 : ata_piix [ 102.966970] scsi1 : ata_piix [ 102.967035] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND [ 102.967039] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN0._GTM] (Node ffff81007b72ea80), AE_NOT_FOUND [ 102.967096] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND [ 102.967099] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.CHN1._GTM] (Node ffff81007b72ebc0), AE_NOT_FOUND [ 102.967128] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 102.967130] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 102.967804] USB Universal Host Controller Interface driver v3.0 [ 102.984983] FDC 0 is a National Semiconductor PC87306 [ 103.439276] ata1.00: ATAPI: PLEXTOR DVDR PX-755A, 1.04, max UDMA/66 [ 103.602862] ata1.00: configured for UDMA/66 [ 103.771599] scsi 0:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.04 PQ: 0 ANSI: 5 [ 103.771677] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 103.771713] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 [ 103.771736] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 103.771781] scsi2 : ata_piix [ 103.771820] scsi3 : ata_piix [ 103.771873] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND [ 103.771877] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff810079e40460), AE_NOT_FOUND [ 103.771925] ACPI Error (psargs-0355): [FZHD] Namespace lookup failure, AE_NOT_FOUND [ 103.771927] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff810079e405a0), AE_NOT_FOUND [ 103.771955] ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 19 [ 103.771957] ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 19 [ 103.934237] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133 [ 103.934240] ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 103.950183] ata3.00: configured for UDMA/133 [ 104.116597] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 104.116761] ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 104.118078] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 104.118083] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 104.118276] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 104.122183] ehci_hcd 0000:00:1a.7: debug port 1 [ 104.122189] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 104.122193] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xffa73000 [ 104.126834] Driver 'sr' needs updating - please use bus_type methods [ 104.127695] Driver 'sd' needs updating - please use bus_type methods [ 104.129812] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 104.129813] Uniform CD-ROM driver Revision: 3.20 [ 104.129845] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 104.129889] sd 2:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 104.129896] sd 2:0:0:0: [sda] Write Protect is off [ 104.129898] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 104.129908] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 104.129941] sd 2:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 104.129962] sd 2:0:0:0: [sda] Write Protect is off [ 104.129964] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 104.129988] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 104.129991] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 104.132500] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 104.137653] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 104.137717] usb usb1: configuration #1 chosen from 1 choice [ 104.137732] hub 1-0:1.0: USB hub found [ 104.137736] hub 1-0:1.0: 6 ports detected [ 104.141120] sda1 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 104.196383] sd 2:0:0:0: [sda] Attached SCSI disk [ 104.241470] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 104.241481] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 104.241485] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 104.241513] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 104.241546] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 104.241618] usb usb2: configuration #1 chosen from 1 choice [ 104.241633] hub 2-0:1.0: USB hub found [ 104.241636] hub 2-0:1.0: 2 ports detected [ 104.344680] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 104.344688] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 104.344691] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 104.344707] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 104.344739] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800 [ 104.344804] usb usb3: configuration #1 chosen from 1 choice [ 104.344818] hub 3-0:1.0: USB hub found [ 104.344821] hub 3-0:1.0: 2 ports detected [ 104.448413] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 104.448421] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 104.448424] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 104.448439] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 104.448466] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d480 [ 104.448535] usb usb4: configuration #1 chosen from 1 choice [ 104.448548] hub 4-0:1.0: USB hub found [ 104.448551] hub 4-0:1.0: 2 ports detected [ 104.463433] Attempting manual resume [ 104.463434] swsusp: Resume From Partition 8:9 [ 104.463435] PM: Checking swsusp image. [ 104.463577] PM: Resume from disk failed. [ 104.488918] kjournald starting. Commit interval 5 seconds [ 104.488934] EXT3-fs: mounted filesystem with ordered data mode. [ 104.552171] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 104.552181] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 104.552185] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 104.552203] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 104.552236] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 104.552307] usb usb5: configuration #1 chosen from 1 choice [ 104.552322] hub 5-0:1.0: USB hub found [ 104.552325] hub 5-0:1.0: 2 ports detected [ 104.655889] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 104.655897] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 104.655900] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 104.655915] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 104.655939] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080 [ 104.656009] usb usb6: configuration #1 chosen from 1 choice [ 104.656022] hub 6-0:1.0: USB hub found [ 104.656025] hub 6-0:1.0: 2 ports detected [ 104.759618] ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 16 (level, low) -> IRQ 16 [ 104.759625] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 104.759628] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 104.759643] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 104.759667] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d000 [ 104.759737] usb usb7: configuration #1 chosen from 1 choice [ 104.759749] hub 7-0:1.0: USB hub found [ 104.759752] hub 7-0:1.0: 2 ports detected [ 104.863371] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 104.864834] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 104.864840] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 104.864883] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 104.868787] ehci_hcd 0000:00:1d.7: debug port 1 [ 104.868797] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 104.868803] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa72000 [ 104.904700] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 104.915169] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 104.915248] usb usb8: configuration #1 chosen from 1 choice [ 104.915269] hub 8-0:1.0: USB hub found [ 104.915274] hub 8-0:1.0: 6 ports detected [ 105.065038] usb 3-2: configuration #1 chosen from 1 choice [ 105.067978] hub 3-2:1.0: USB hub found [ 105.069952] hub 3-2:1.0: 4 ports detected [ 105.422376] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 105.589708] usb 4-1: configuration #1 chosen from 1 choice [ 105.794137] usb 3-2.1: new low speed USB device using uhci_hcd and address 3 [ 105.977740] usb 3-2.1: configuration #1 chosen from 1 choice [ 108.583411] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 108.754274] agpgart: Detected an Intel G33 Chipset. [ 108.756934] agpgart: Detected 6140K stolen memory. [ 108.768462] agpgart: AGP aperture is 256M @ 0xd0000000 [ 108.815461] input: Power Button (FF) as /devices/virtual/input/input3 [ 108.830791] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 [ 108.830794] e1000e: Copyright (c) 1999-2007 Intel Corporation. [ 108.830860] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 108.830878] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 108.835301] heci: Intel(R) AMT Management Interface - version 3.1.0.31 [ 108.835303] heci: Copyright (c) 2003 - 2007 Intel Corporation. [ 108.971621] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 88:88:88:88:87:88 [ 108.971624] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 108.971657] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff [ 108.971684] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 108.971688] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 108.973223] heci: link layer has been established. [ 108.973360] ACPI: Power Button (FF) [PWRF] [ 108.973421] input: Power Button (CM) as /devices/virtual/input/input4 [ 109.025204] ACPI: Power Button (CM) [PWRB] [ 109.081301] heci: heci driver initialization successful. [ 109.140542] usbcore: registered new interface driver hiddev [ 109.154878] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb4/4-1/4-1:1.0/input/input5 [ 109.216259] input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1a.2-1 [ 109.248666] input: ATEN CS-1734A V3.4.331 as /devices/pci0000:00/0000:00:1a.1/usb3/3-2/3-2.1/3-2.1:1.0/input/input6 [ 109.259086] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 109.260376] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 109.285572] input,hidraw1: USB HID v1.00 Keyboard [ATEN CS-1734A V3.4.331] on usb-0000:00:1a.1-2.1 [ 109.312474] input: ATEN CS-1734A V3.4.331 as /devices/pci0000:00/0000:00:1a.1/usb3/3-2/3-2.1/3-2.1:1.1/input/input7 [ 109.345392] input,hidraw2: USB HID v1.00 Mouse [ATEN CS-1734A V3.4.331] on usb-0000:00:1a.1-2.1 [ 109.345401] usbcore: registered new interface driver usbhid [ 109.345403] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 110.036971] lp: driver loaded but no devices found [ 110.106969] Adding 2329384k swap on /dev/sda9. Priority:-1 extents:1 across:2329384k [ 110.624759] NET: Registered protocol family 17 [ 110.687190] EXT3 FS on sda1, internal journal [ 111.422995] 0000:00:19.0: eth0: Link is Up 100 Mbps Half Duplex, Flow Control: None [ 111.422998] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 112.543286] kjournald starting. Commit interval 5 seconds [ 112.543465] EXT3 FS on sda3, internal journal [ 112.543469] EXT3-fs: mounted filesystem with ordered data mode. [ 112.553888] kjournald starting. Commit interval 5 seconds [ 112.559723] EXT3 FS on sda5, internal journal [ 112.559726] EXT3-fs: mounted filesystem with ordered data mode. [ 112.587177] kjournald starting. Commit interval 5 seconds [ 112.587356] EXT3 FS on sda6, internal journal [ 112.587360] EXT3-fs: mounted filesystem with ordered data mode. [ 112.605770] kjournald starting. Commit interval 5 seconds [ 112.605956] EXT3 FS on sda7, internal journal [ 112.605959] EXT3-fs: mounted filesystem with ordered data mode. [ 112.631238] kjournald starting. Commit interval 5 seconds [ 112.631414] EXT3 FS on sda8, internal journal [ 112.631420] EXT3-fs: mounted filesystem with ordered data mode. [ 112.948603] ip_tables: (C) 2000-2006 Netfilter Core Team [ 113.251335] No dock devices found. [ 114.269457] NET: Registered protocol family 10 [ 114.269602] lo: Disabled Privacy Extensions [ 114.491983] ppdev: user-space parallel port driver [ 115.700272] Bluetooth: Core ver 2.11 [ 115.700351] NET: Registered protocol family 31 [ 115.700353] Bluetooth: HCI device and connection manager initialized [ 115.700356] Bluetooth: HCI socket layer initialized [ 115.705889] Bluetooth: L2CAP ver 2.9 [ 115.705892] Bluetooth: L2CAP socket layer initialized [ 115.775394] Bluetooth: RFCOMM socket layer initialized [ 115.775403] Bluetooth: RFCOMM TTY layer initialized [ 115.775404] Bluetooth: RFCOMM ver 1.8 [ 118.432118] [drm] Initialized drm 1.1.0 20060810 [ 118.457008] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 118.457016] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 118.457065] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 118.737557] set status page addr 0x00033000 [ 124.353621] eth0: no IPv6 routers present [ 256.398863] ACPI: PCI interrupt for device 0000:00:03.0 disabled [ 293.427334] heci: Intel(R) AMT Management Interface - version 3.1.0.31 [ 293.427338] heci: Copyright (c) 2003 - 2007 Intel Corporation. [ 293.427986] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 293.427991] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 293.431186] heci: link layer has been established. [ 293.544375] heci: heci driver initialization successful. [ 481.052066] heci: schedule work the heci_bh_handler failed error=0