[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-23-generic (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable) [ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfedf800 (usable) [ 0.000000] BIOS-e820: 00000000bfedf800 - 00000000bfee0000 (reserved) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: HP-Pavilion GX598AA-ABF a6221.fr/Leonite2, BIOS 5.21 07/27/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbfedf max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 3071M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] found SMP MP-table at [c00f5f10] f5f10 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 35a56000 - 36d23000 [ 0.000000] ACPI: RSDP 000f83a0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT bfee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP bfee7900 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT bfee3280 0463B (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS bfee0000 00040 [ 0.000000] ACPI: SLIC bfee7b40 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET bfee7d00 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG bfee7d80 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC bfee7a40 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT bfee82e0 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfedf [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x000bfedf [ 0.000000] On node 0 totalpages: 786023 [ 0.000000] free_area_init_node: node 0, pgdat c18258c0, node_mem_map f4256200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3944 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554451 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7000000 s31616 r0 d21632 u1048576 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779881 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=89e07ea3-c731-4485-806f-88ce53d590ac ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 12578032 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfedf) [ 0.000000] Memory: 3076868k/3144572k available (5627k kernel code, 67224k reserved, 2764k data, 712k init, 2235268k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1833000 - 0xc18e5000 ( 712 kB) [ 0.000000] .data : 0xc157ef84 - 0xc1832080 (2764 kB) [ 0.000000] .text : 0xc1000000 - 0xc157ef84 (5627 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f300a000 soft=f300c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.500 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.00 BogoMIPS (lpj=8002000) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004053] AppArmor: AppArmor initialized [ 0.004056] Yama: becoming mindful. [ 0.004119] Mount-cache hash table entries: 512 [ 0.004276] Initializing cgroup subsys cpuacct [ 0.004283] Initializing cgroup subsys memory [ 0.004292] Initializing cgroup subsys devices [ 0.004295] Initializing cgroup subsys freezer [ 0.004297] Initializing cgroup subsys blkio [ 0.004304] Initializing cgroup subsys perf_event [ 0.004334] CPU: Physical Processor ID: 0 [ 0.004336] CPU: Processor Core ID: 0 [ 0.004339] mce: CPU supports 6 MCE banks [ 0.004348] CPU0: Thermal monitoring enabled (TM2) [ 0.004353] using mwait in idle threads. [ 0.006546] ACPI: Core revision 20110623 [ 0.012031] ftrace: allocating 25954 entries in 51 pages [ 0.016058] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020354] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060048] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] CPU 1 irqstacks, hard=f30f2000 soft=f30f4000 [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 94000 [ 0.008000] Initializing CPU#1 [ 0.152041] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152083] Brought up 2 CPUs [ 0.152086] Total of 2 processors activated (8002.09 BogoMIPS). [ 0.153436] devtmpfs: initialized [ 0.153436] EVM: security.selinux [ 0.153436] EVM: security.SMACK64 [ 0.153436] EVM: security.capability [ 0.153436] PM: Registering ACPI NVS region at bfee0000 (12288 bytes) [ 0.153436] print_constraints: dummy: [ 0.153436] RTC time: 22:02:35, date: 04/24/12 [ 0.153436] NET: Registered protocol family 16 [ 0.153436] Trying to unpack rootfs image as initramfs... [ 0.153436] EISA bus registered [ 0.153466] ACPI: bus type pci registered [ 0.153539] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.153543] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.153545] PCI: Using MMCONFIG for extended config space [ 0.153547] PCI: Using configuration type 1 for base access [ 0.156762] bio: create slab at 0 [ 0.156861] ACPI: Added _OSI(Module Device) [ 0.156864] ACPI: Added _OSI(Processor Device) [ 0.156867] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.156869] ACPI: Added _OSI(Processor Aggregator Device) [ 0.158105] ACPI: EC: Look up EC in DSDT [ 0.163161] ACPI: SSDT bfee7e00 001B7 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.163475] ACPI: Dynamic OEM Table Load: [ 0.163479] ACPI: SSDT (null) 001B7 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.163640] ACPI: SSDT bfee8210 000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.163940] ACPI: Dynamic OEM Table Load: [ 0.163944] ACPI: SSDT (null) 000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.164133] ACPI: Interpreter enabled [ 0.164145] ACPI: (supports S0 S1 S3 S4 S5) [ 0.164172] ACPI: Using IOAPIC for interrupt routing [ 0.168433] ACPI: No dock devices found. [ 0.168436] HEST: Table not found. [ 0.168441] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.168507] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.168644] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.168648] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.168651] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.168654] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.168657] pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff] (ignored) [ 0.168671] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600 [ 0.168727] pci 0000:00:01.0: [8086:2771] type 1 class 0x000604 [ 0.168780] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.168784] pci 0000:00:01.0: PME# disabled [ 0.168836] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.168855] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit] [ 0.168932] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.168937] pci 0000:00:1b.0: PME# disabled [ 0.168959] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.169040] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.169044] pci 0000:00:1c.0: PME# disabled [ 0.169072] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.169117] pci 0000:00:1d.0: reg 20: [io 0xff00-0xff1f] [ 0.169152] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.169198] pci 0000:00:1d.1: reg 20: [io 0xfe00-0xfe1f] [ 0.169234] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.169279] pci 0000:00:1d.2: reg 20: [io 0xfd00-0xfd1f] [ 0.169314] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.169359] pci 0000:00:1d.3: reg 20: [io 0xfc00-0xfc1f] [ 0.169401] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.169420] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff] [ 0.169501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.169507] pci 0000:00:1d.7: PME# disabled [ 0.169524] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.169596] pci 0000:00:1f.0: [8086:27b0] type 0 class 0x000601 [ 0.169718] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.169733] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.169743] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.169754] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.169764] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.169774] pci 0000:00:1f.1: reg 20: [io 0xfb00-0xfb0f] [ 0.169815] pci 0000:00:1f.2: [8086:27c3] type 0 class 0x000104 [ 0.169833] pci 0000:00:1f.2: reg 10: [io 0xfa00-0xfa07] [ 0.169842] pci 0000:00:1f.2: reg 14: [io 0xf900-0xf903] [ 0.169851] pci 0000:00:1f.2: reg 18: [io 0xf800-0xf807] [ 0.169861] pci 0000:00:1f.2: reg 1c: [io 0xf700-0xf703] [ 0.169871] pci 0000:00:1f.2: reg 20: [io 0xf600-0xf60f] [ 0.169880] pci 0000:00:1f.2: reg 24: [mem 0xfdffe000-0xfdffe3ff] [ 0.169922] pci 0000:00:1f.2: PME# supported from D3hot [ 0.169926] pci 0000:00:1f.2: PME# disabled [ 0.169943] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.169999] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.170083] pci 0000:01:00.0: [10de:0611] type 0 class 0x000300 [ 0.170096] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.170109] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.170122] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.170132] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f] [ 0.170141] pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref] [ 0.176029] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.176035] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.176039] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.176044] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.176111] pci 0000:02:00.0: [168c:0024] type 0 class 0x000280 [ 0.176136] pci 0000:02:00.0: reg 10: [mem 0xfddf0000-0xfddfffff 64bit] [ 0.176263] pci 0000:02:00.0: supports D1 [ 0.176265] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.176271] pci 0000:02:00.0: PME# disabled [ 0.176297] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176308] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.176315] pci 0000:00:1c.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.176359] pci 0000:03:01.0: [11c1:5811] type 0 class 0x000c00 [ 0.176378] pci 0000:03:01.0: reg 10: [mem 0xfdeff000-0xfdefffff] [ 0.176461] pci 0000:03:01.0: supports D1 D2 [ 0.176464] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot [ 0.176468] pci 0000:03:01.0: PME# disabled [ 0.176495] pci 0000:03:08.0: [8086:27dc] type 0 class 0x000200 [ 0.176514] pci 0000:03:08.0: reg 10: [mem 0xfdefe000-0xfdefefff] [ 0.176525] pci 0000:03:08.0: reg 14: [io 0xef00-0xef3f] [ 0.176597] pci 0000:03:08.0: supports D1 D2 [ 0.176600] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176605] pci 0000:03:08.0: PME# disabled [ 0.176644] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.176649] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.176654] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.176661] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.176665] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.176681] pci_bus 0000:00: on NUMA node 0 [ 0.176689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.176860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.176920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.177143] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.177147] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.177149] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.185516] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.185576] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.185634] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.185691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.185748] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.185805] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.185866] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.185924] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.186071] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.186076] vgaarb: loaded [ 0.186078] vgaarb: bridge control possible 0000:01:00.0 [ 0.186217] i2c-core: driver [aat2870] using legacy suspend method [ 0.186219] i2c-core: driver [aat2870] using legacy resume method [ 0.186322] SCSI subsystem initialized [ 0.186391] libata version 3.00 loaded. [ 0.186450] usbcore: registered new interface driver usbfs [ 0.186471] usbcore: registered new interface driver hub [ 0.186504] usbcore: registered new device driver usb [ 0.186620] PCI: Using ACPI for IRQ routing [ 0.188316] PCI: pci_cache_line_size set to 64 bytes [ 0.188400] reserve RAM buffer: 0000000000098400 - 000000000009ffff [ 0.188403] reserve RAM buffer: 00000000bfedf800 - 00000000bfffffff [ 0.188527] NetLabel: Initializing [ 0.188529] NetLabel: domain hash size = 128 [ 0.188531] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.188546] NetLabel: unlabeled traffic allowed by default [ 0.188606] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.188611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.188617] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.196085] Switching to clocksource hpet [ 0.205819] AppArmor: AppArmor Filesystem Enabled [ 0.205859] pnp: PnP ACPI init [ 0.205883] ACPI: bus type pnp registered [ 0.206018] pnp 00:00: [bus 00-ff] [ 0.206021] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.206024] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.206027] pnp 00:00: [io 0x0d00-0xffff window] [ 0.206030] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.206032] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.206035] pnp 00:00: [mem 0xbff00000-0xfebfffff window] [ 0.206103] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.206173] pnp 00:01: [io 0x0010-0x001f] [ 0.206176] pnp 00:01: [io 0x0022-0x003f] [ 0.206178] pnp 00:01: [io 0x0044-0x005f] [ 0.206180] pnp 00:01: [io 0x0062-0x0063] [ 0.206183] pnp 00:01: [io 0x0065-0x006f] [ 0.206185] pnp 00:01: [io 0x0074-0x007f] [ 0.206187] pnp 00:01: [io 0x0091-0x0093] [ 0.206189] pnp 00:01: [io 0x00a2-0x00bf] [ 0.206192] pnp 00:01: [io 0x00e0-0x00ef] [ 0.206194] pnp 00:01: [io 0x04d0-0x04d1] [ 0.206196] pnp 00:01: [io 0x0800-0x087f] [ 0.206198] pnp 00:01: [io 0x0294-0x0297] [ 0.206201] pnp 00:01: [io 0x0880-0x088f] [ 0.206277] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.206280] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.206283] system 00:01: [io 0x0294-0x0297] has been reserved [ 0.206286] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.206290] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.206305] pnp 00:02: [dma 4] [ 0.206307] pnp 00:02: [io 0x0000-0x000f] [ 0.206309] pnp 00:02: [io 0x0080-0x0090] [ 0.206312] pnp 00:02: [io 0x0094-0x009f] [ 0.206314] pnp 00:02: [io 0x00c0-0x00df] [ 0.206348] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.206404] pnp 00:03: [irq 0 disabled] [ 0.206420] pnp 00:03: [irq 8] [ 0.206423] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.206461] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.206491] pnp 00:04: [io 0x0070-0x0073] [ 0.206530] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.206541] pnp 00:05: [io 0x0061] [ 0.206577] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.206587] pnp 00:06: [io 0x00f0-0x00ff] [ 0.206594] pnp 00:06: [irq 13] [ 0.206632] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.206757] pnp 00:07: [io 0x0400-0x04bf] [ 0.206814] system 00:07: [io 0x0400-0x04bf] has been reserved [ 0.206819] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.206841] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 0.206882] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.207102] pnp 00:09: [mem 0xf0000000-0xf3ffffff] [ 0.207175] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.207179] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.207201] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110623/dsopcode-236) [ 0.207208] ACPI Error: Method parse/execution failed [\_SB_.MEM_._CRS] (Node f3027990), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 0.207219] ACPI Error: Method execution failed [\_SB_.MEM_._CRS] (Node f3027990), AE_AML_BUFFER_LIMIT (20110623/uteval-103) [ 0.207227] pnp 00:0a: can't evaluate _CRS: 12298 [ 0.207296] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.207308] pnp: PnP ACPI: found 11 devices [ 0.207310] ACPI: ACPI bus type pnp unregistered [ 0.207315] PnPBIOS: Disabled by ACPI PNP [ 0.244066] PCI: max bus depth: 1 pci_try_num: 2 [ 0.244102] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.244107] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.244111] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.244114] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.244119] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.244123] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.244129] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.244132] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.244138] pci 0000:00:1c.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.244142] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.244149] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.244153] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.244158] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.244187] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.244192] pci 0000:00:01.0: setting latency timer to 64 [ 0.244202] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.244207] pci 0000:00:1c.0: setting latency timer to 64 [ 0.244214] pci 0000:00:1e.0: setting latency timer to 64 [ 0.244219] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.244221] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.244224] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.244227] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.244230] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.244233] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.244235] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.244238] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.244241] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.244244] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.244247] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.244249] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] [ 0.244311] NET: Registered protocol family 2 [ 0.244397] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.244671] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.245156] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.245382] TCP: Hash tables configured (established 131072 bind 65536) [ 0.245385] TCP reno registered [ 0.245388] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.245398] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.245506] NET: Registered protocol family 1 [ 0.245557] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.245576] pci 0000:00:1d.0: PCI INT A disabled [ 0.245588] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.245605] pci 0000:00:1d.1: PCI INT B disabled [ 0.245617] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.245634] pci 0000:00:1d.2: PCI INT C disabled [ 0.245642] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.245658] pci 0000:00:1d.3: PCI INT D disabled [ 0.245668] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.245697] pci 0000:00:1d.7: PCI INT A disabled [ 0.245726] pci 0000:01:00.0: Boot video device [ 0.245745] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling [ 0.245751] PCI: CLS 32 bytes, default 64 [ 0.246204] audit: initializing netlink socket (disabled) [ 0.246217] type=2000 audit(1335304955.240:1): initialized [ 0.276497] highmem bounce pool size: 64 pages [ 0.276504] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.289839] VFS: Disk quotas dquot_6.5.2 [ 0.289926] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.290587] fuse init (API version 7.17) [ 0.290697] msgmni has been set to 1643 [ 0.291060] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.291089] io scheduler noop registered [ 0.291092] io scheduler deadline registered [ 0.291100] io scheduler cfq registered (default) [ 0.291237] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.291276] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.291334] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.291375] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.291475] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.291504] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.291599] intel_idle: MWAIT substates: 0x220 [ 0.291601] intel_idle: does not run on family 6 model 15 [ 0.291690] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.291696] ACPI: Power Button [PWRB] [ 0.291761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.291765] ACPI: Power Button [PWRF] [ 0.291825] ACPI: Fan [FAN] (on) [ 0.293382] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.293385] ACPI: Thermal Zone [THRM] (31 C) [ 0.293430] ERST: Table is not found! [ 0.293432] GHES: HEST is not enabled! [ 0.293522] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.293846] isapnp: Scanning for PnP cards... [ 0.630176] Freeing initrd memory: 19252k freed [ 0.646909] isapnp: No Plug & Play device found [ 0.716538] Linux agpgart interface v0.103 [ 0.718594] brd: module loaded [ 0.719546] loop: module loaded [ 0.719682] ahci 0000:00:1f.2: version 3.0 [ 0.719699] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.719747] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.719822] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 0.719826] ahci 0000:00:1f.2: flags: 64bit ncq led clo [ 0.719830] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.720593] scsi0 : ahci [ 0.720702] scsi1 : ahci [ 0.720792] scsi2 : ahci [ 0.720882] scsi3 : ahci [ 0.721039] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 42 [ 0.721043] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 42 [ 0.721046] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 42 [ 0.721050] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 42 [ 0.721160] ata_piix 0000:00:1f.1: version 2.13 [ 0.721169] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.721205] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.721566] scsi4 : ata_piix [ 0.721651] scsi5 : ata_piix [ 0.722000] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 0.722004] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 0.722079] ata6: port disabled--ignoring [ 0.722467] Fixed MDIO Bus: probed [ 0.722492] tun: Universal TUN/TAP device driver, 1.6 [ 0.722494] tun: (C) 1999-2004 Max Krasnyansky [ 0.722644] PPP generic driver version 2.4.2 [ 0.722783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.722802] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.722816] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.722820] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.722886] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.722905] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.726791] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.726808] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.740037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.740245] hub 1-0:1.0: USB hub found [ 0.740250] hub 1-0:1.0: 8 ports detected [ 0.740345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.740361] uhci_hcd: USB Universal Host Controller Interface driver [ 0.740384] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.740392] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.740396] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.740445] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.740469] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 0.740618] hub 2-0:1.0: USB hub found [ 0.740623] hub 2-0:1.0: 2 ports detected [ 0.740696] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.740704] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.740708] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.740760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.740793] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 0.740938] hub 3-0:1.0: USB hub found [ 0.740943] hub 3-0:1.0: 2 ports detected [ 0.741017] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.741025] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.741029] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.741082] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.741115] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 0.741260] hub 4-0:1.0: USB hub found [ 0.741265] hub 4-0:1.0: 2 ports detected [ 0.741341] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.741350] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.741354] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.741403] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.741436] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 0.741585] hub 5-0:1.0: USB hub found [ 0.741589] hub 5-0:1.0: 2 ports detected [ 0.741717] usbcore: registered new interface driver libusual [ 0.741775] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.744242] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.744249] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.744407] mousedev: PS/2 mouse device common for all mice [ 0.744578] rtc_cmos 00:04: RTC can wake from S4 [ 0.744692] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.744717] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.744806] device-mapper: uevent: version 1.0.3 [ 0.744887] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.744928] EISA: Probing bus 0 at eisa.0 [ 0.744934] Cannot allocate resource for EISA slot 1 [ 0.744956] EISA: Detected 0 cards. [ 0.744967] cpufreq-nforce2: No nForce2 chipset. [ 0.744970] cpuidle: using governor ladder [ 0.744972] cpuidle: using governor menu [ 0.744974] EFI Variables Facility v0.08 2004-May-17 [ 0.745288] TCP cubic registered [ 0.745430] NET: Registered protocol family 10 [ 0.746159] NET: Registered protocol family 17 [ 0.746175] Registering the dns_resolver key type [ 0.746201] Using IPI No-Shortcut mode [ 0.746316] PM: Hibernation image not present or could not be loaded. [ 0.746330] registered taskstats version 1 [ 0.759441] Magic number: 8:88:48 [ 0.759537] rtc_cmos 00:04: setting system clock to 2012-04-24 22:02:36 UTC (1335304956) [ 0.760464] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.760467] EDD information not available. [ 1.040040] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.040064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.040084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.040102] ata3: SATA link down (SStatus 0 SControl 300) [ 1.040710] ata4.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 [ 1.040716] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.041439] ata4.00: configured for UDMA/133 [ 1.042711] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0714, max UDMA/33 [ 1.042717] ata2.00: applying bridge limits [ 1.043255] ata1.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133 [ 1.043260] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.045829] ata2.00: configured for UDMA/33 [ 1.047256] ata1.00: configured for UDMA/133 [ 1.047449] scsi 0:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 1.047596] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.047642] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.047655] sd 0:0:0:0: [sda] Write Protect is off [ 1.047658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.047684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.048561] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0714 PQ: 0 ANSI: 5 [ 1.053742] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.053748] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.053925] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.053997] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.054161] scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 1.054290] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.054315] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.054350] sd 3:0:0:0: [sdb] Write Protect is off [ 1.054353] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.054381] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.054716] sda: sda1 [ 1.054985] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.099038] sdb: sdb1 sdb2 [ 1.099398] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.099429] Freeing unused kernel memory: 712k freed [ 1.099687] Write protecting the kernel text: 5628k [ 1.099743] Write protecting the kernel read-only data: 2324k [ 1.119450] udevd[99]: starting version 175 [ 1.207399] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.212722] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.212725] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.220071] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 1.244032] Refined TSC clocksource calibration: 2000.567 MHz. [ 1.244041] Switching to clocksource tsc [ 1.260102] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 1.260180] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.284446] e100 0000:03:08.0: PME# disabled [ 1.285040] e100 0000:03:08.0: eth0: addr 0xfdefe000, irq 20, MAC addr 00:1d:60:ab:f5:51 [ 1.588037] usb 1-7: new high-speed USB device number 5 using ehci_hcd [ 1.724224] Initializing USB Mass Storage driver... [ 1.724351] scsi6 : usb-storage 1-7:1.0 [ 1.724440] usbcore: registered new interface driver usb-storage [ 1.724442] USB Mass Storage support registered. [ 1.724695] usbcore: registered new interface driver uas [ 1.760161] firewire_core: created device fw0: GUID 0011d800017f8ed3, S400 [ 1.960024] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 2.180160] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2 [ 2.180275] generic-usb 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1/input0 [ 2.219660] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3 [ 2.219772] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1/input1 [ 2.219790] usbcore: registered new interface driver usbhid [ 2.219792] usbhid: USB HID core driver [ 2.394768] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 2.394772] vesafb: scrolling: redraw [ 2.394775] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.396605] vesafb: framebuffer at 0xf9000000, mapped to 0xf8200000, using 6912k, total 6912k [ 2.396751] Console: switching to colour frame buffer device 210x65 [ 2.396798] fb0: VESA VGA frame buffer device [ 2.404036] usb 2-2: new full-speed USB device number 3 using uhci_hcd [ 2.593113] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4 [ 2.593812] generic-usb 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 [ 2.599720] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5 [ 2.599893] generic-usb 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 [ 2.724840] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 2.725462] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 2.726085] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 2.726710] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 2.727451] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 2.729193] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 2.729808] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 2.729977] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 2.730183] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 2.737444] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 2.743066] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 2.743686] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 7.634178] REISERFS (device sda1): found reiserfs format "3.6" with standard journal [ 7.634213] REISERFS (device sda1): using ordered data mode [ 7.634215] reiserfs: using flush barriers [ 7.640737] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 7.641088] REISERFS (device sda1): checking transaction log (sda1) [ 7.707437] REISERFS (device sda1): Using r5 hash to sort names [ 25.380648] udevd[382]: starting version 175 [ 25.405344] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.484648] Adding 2925564k swap on /dev/sdb2. Priority:-1 extents:1 across:2925564k [ 25.564328] reiserfs: enabling write barrier flush mode [ 26.446699] lp: driver loaded but no devices found [ 26.741697] leds_ss4200: no LED devices found [ 26.836740] cfg80211: Calling CRDA to update world regulatory domain [ 26.974880] wmi: Mapper loaded [ 27.154344] REISERFS (device sdb1): found reiserfs format "3.6" with standard journal [ 27.154380] REISERFS (device sdb1): using ordered data mode [ 27.154384] reiserfs: using flush barriers [ 27.191933] REISERFS (device sdb1): journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 27.192313] REISERFS (device sdb1): checking transaction log (sdb1) [ 27.298885] [drm] Initialized drm 1.1.0 20060810 [ 27.307297] REISERFS (device sdb1): Using r5 hash to sort names [ 27.740015] cfg80211: World regulatory domain updated: [ 27.740019] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.740022] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.740026] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.740029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.740032] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.740035] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.874545] VGA switcheroo: detected Optimus DSM method \ handle [ 27.874588] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 27.874595] nouveau 0000:01:00.0: setting latency timer to 64 [ 27.877903] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092880a2) [ 27.877911] checking generic (f9000000 6c0000) vs hw (e0000000 10000000) [ 27.877914] checking generic (f9000000 6c0000) vs hw (f8000000 2000000) [ 27.877916] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 27.877985] Console: switching to colour dummy device 80x25 [ 27.884078] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 27.906132] Linux video capture interface: v2.00 [ 27.910694] uvcvideo: Found UVC 1.00 device (046d:0990) [ 27.924646] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input6 [ 27.925217] usbcore: registered new interface driver uvcvideo [ 27.925219] USB Video Class driver (1.1.1) [ 27.940841] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 27.940845] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 27.940849] [drm] nouveau 0000:01:00.0: Bios version 62.92.1f.00 [ 27.940854] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 27.940857] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 27.940861] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028 [ 27.940864] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030 [ 27.940867] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 27.940869] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030 [ 27.940872] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080 [ 27.940876] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 27.940880] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 27.940883] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 27.940886] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 27.940889] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 27.940892] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 27.940897] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC10F [ 27.964695] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC4B3 [ 27.967505] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD22E [ 27.967512] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD350 [ 27.968581] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD580 [ 27.968585] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5E5 [ 27.988433] [drm] nouveau 0000:01:00.0: 0xD5E5: Condition still not met after 20ms, skipping following opcodes [ 28.020870] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 28.020926] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 28.020954] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 28.158540] hda_codec: ALC1200: BIOS auto-probing. [ 28.158545] hda_codec: ALC1200: SKU not ready 0x411111f0 [ 28.173902] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 28.176856] adt7475 0-002e: ADT7473 device, revision 0 [ 28.176859] adt7475 0-002e: Optional features: pwm2 [ 28.177305] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 28.177526] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 28.177739] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 28.177954] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 28.178170] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 28.178381] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 28.178601] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 28.192828] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473 [ 28.192833] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 28.192838] [drm] nouveau 0000:01:00.0: 3: core 600MHz shader 1500MHz memory 900MHz fanspeed 100% [ 28.192856] [drm] nouveau 0000:01:00.0: c: core 399MHz shader 810MHz memory 399MHz voltage 1050mV [ 28.201374] [TTM] Zone kernel: Available graphics memory: 430782 kiB. [ 28.201377] [TTM] Zone highmem: Available graphics memory: 1548416 kiB. [ 28.201380] [TTM] Initializing pool allocator. [ 28.201395] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 28.215874] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 28.221396] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 28.221400] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing [ 28.226439] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 28.226443] [drm] No driver support for vblank timestamp query. [ 28.261172] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 28.261185] ath9k 0000:02:00.0: setting latency timer to 64 [ 28.292908] type=1400 audit(1335304984.030:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=669 comm="apparmor_parser" [ 28.293388] type=1400 audit(1335304984.030:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=669 comm="apparmor_parser" [ 28.293657] type=1400 audit(1335304984.030:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=669 comm="apparmor_parser" [ 28.294400] type=1400 audit(1335304984.030:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=666 comm="apparmor_parser" [ 28.294888] type=1400 audit(1335304984.030:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=666 comm="apparmor_parser" [ 28.295162] type=1400 audit(1335304984.030:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=666 comm="apparmor_parser" [ 28.382530] ath: EEPROM regdomain: 0x30 [ 28.382532] ath: EEPROM indicates we should expect a direct regpair map [ 28.382536] ath: Country alpha2 being used: AM [ 28.382538] ath: Regpair used: 0x30 [ 28.382976] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 28.382980] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.382982] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 28.382986] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.382988] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 28.382991] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.382994] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 28.382997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.382999] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 28.383002] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383005] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 28.383008] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383010] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 28.383013] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383016] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 28.383019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383021] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 28.383024] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383027] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 28.383030] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383033] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 28.383036] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.383038] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 28.383041] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 28.383044] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 28.386596] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 28.386600] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386602] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 28.386605] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386608] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 28.386611] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386614] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 28.386617] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386619] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 28.386622] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386625] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 28.386628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386631] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 28.386634] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386636] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 28.386639] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386642] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 28.386645] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386648] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 28.386651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386653] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 28.386656] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.386659] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 28.386662] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.386665] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 28.386668] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.386670] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 28.386673] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.398292] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x330000, bo f6fd3800 [ 28.398445] fbcon: nouveaufb (fb0) is primary device [ 28.398598] Console: switching to colour frame buffer device 210x65 [ 28.398605] fb0: nouveaufb frame buffer device [ 28.398607] drm: registered panic notifier [ 28.398615] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 28.424867] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 28.425645] cfg80211: Calling CRDA for country: AM [ 28.425688] Registered led device: ath9k-phy0 [ 28.425693] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xf8d60000, irq=16 [ 28.431425] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 28.431431] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431433] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 28.431437] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431439] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 28.431442] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431444] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 28.431448] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431450] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 28.431453] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431456] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 28.431459] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431461] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 28.431464] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431467] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 28.431470] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431473] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 28.431476] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431478] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 28.431482] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431484] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 28.431487] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431490] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 28.431493] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431495] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 28.431498] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 28.431501] cfg80211: Disabling freq 2484 MHz [ 28.431505] cfg80211: Regulatory domain changed to country: AM [ 28.431507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.431510] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 28.431512] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 28.431515] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 28.576856] usbcore: registered new interface driver snd-usb-audio [ 28.968309] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001376b4c on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 28.968339] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x000138a680 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 29.661351] init: failsafe main process (808) killed by TERM signal [ 29.950003] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x000137a020 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 30.440548] type=1400 audit(1335304986.178:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1048 comm="apparmor_parser" [ 30.441044] type=1400 audit(1335304986.178:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1048 comm="apparmor_parser" [ 30.441316] type=1400 audit(1335304986.178:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1048 comm="apparmor_parser" [ 30.510024] type=1400 audit(1335304986.246:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1047 comm="apparmor_parser" [ 30.890357] ppdev: user-space parallel port driver [ 30.956294] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001376c40 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 31.772693] [drm] nouveau 0000:01:00.0: VM: trapped read at 0x0000e23600 on ch 0 [0x00000070] BAR/PFIFO_READ/IN reason: PAGE_NOT_PRESENT [ 31.853018] Bluetooth: Core ver 2.16 [ 31.853038] NET: Registered protocol family 31 [ 31.853041] Bluetooth: HCI device and connection manager initialized [ 31.853044] Bluetooth: HCI socket layer initialized [ 31.853047] Bluetooth: L2CAP socket layer initialized [ 31.853054] Bluetooth: SCO socket layer initialized [ 31.895954] Bluetooth: RFCOMM TTY layer initialized [ 31.895965] Bluetooth: RFCOMM socket layer initialized [ 31.895968] Bluetooth: RFCOMM ver 1.11 [ 31.960571] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001376c60 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 31.960601] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x000138dbe0 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 32.131958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.131962] Bluetooth: BNEP filters: protocol multicast [ 32.961232] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001375280 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.440943] [drm] nouveau 0000:01:00.0: VM: trapped read at 0x0000b2bd08 on ch 0 [0x00000070] BAR/PFIFO_READ/IN reason: PAGE_NOT_PRESENT [ 33.449651] [drm] nouveau 0000:01:00.0: VM: trapped read at 0x000192208c on ch 0 [0x00000070] BAR/PFIFO_READ/IN reason: PAGE_NOT_PRESENT [ 33.519890] init: gdm main process (1245) killed by TERM signal [ 33.934114] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001375280 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934138] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x00013910c0 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934185] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001375240 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934211] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x000138c1a0 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934258] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001378644 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934283] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x000138a740 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934329] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001376ba0 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934356] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001388c90 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934402] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x0001375140 on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.934427] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x000138dacc on ch 0 [0x00000070] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT [ 33.970368] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 33.970789] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 33.989960] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.990553] ADDRCONF(NETDEV_UP): eth0: link is not ready