[   24.515401] iwlagn 0000:0c:00.0: Device SKU: 0Xb
[   24.517542] cfg80211: World regulatory domain updated:
[   24.517544] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.517547] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.517550] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.517553] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.517555] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.517558] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.519347] iwlagn 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[   24.519446] iwlagn 0000:0c:00.0: irq 49 for MSI/MSI-X
[   24.545015] elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
[   24.557831] nvidia: module license 'NVIDIA' taints kernel.
[   24.557836] Disabling lock debugging due to kernel taint
[   24.565189] iwlagn 0000:0c:00.0: loaded firmware version 228.61.2.24
[   24.565397] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[   24.738371] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   24.738439] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   24.738472] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   24.807236] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   24.931652] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   25.074357] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.255370] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   25.377957] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   25.377965] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   25.377980] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   25.377995] nvidia 0000:01:00.0: setting latency timer to 64
[   25.378004] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   25.378728] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  270.30  Fri Feb 25 14:34:55 PST 2011
[   25.655737] ppdev: user-space parallel port driver
[   26.175937] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[   30.488275] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[   34.328217] Intel AES-NI instructions are not detected.
[   34.351236] padlock_aes: VIA PadLock not detected.
[   39.604675] ISO 9660 Extensions: Microsoft Joliet Level 3
[   40.013929] ISO 9660 Extensions: RRIP_1991A
[   41.116655] wlan0: authenticate with 00:22:15:37:35:fa (try 1)
[   41.118514] wlan0: authenticated
[   41.118539] wlan0: associate with 00:22:15:37:35:fa (try 1)
[   41.120788] wlan0: RX AssocResp from 00:22:15:37:35:fa (capab=0x411 status=0 aid=1)
[   41.120792] wlan0: associated
[   41.147197] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   51.880014] wlan0: no IPv6 routers present
[   63.070072] CE: hpet increased min_delta_ns to 20113 nsec
[   91.610148] usb 4-2: new full speed USB device using uhci_hcd and address 6
[   91.740156] usb 4-2: device descriptor read/64, error -71
[   91.980065] usb 4-2: device descriptor read/64, error -71
[   92.210049] usb 4-2: new full speed USB device using uhci_hcd and address 7
[   92.400060] usb 4-2: device descriptor read/64, error -71
[   92.650020] usb 4-2: device descriptor read/64, error -71
[   92.880198] usb 4-2: new full speed USB device using uhci_hcd and address 8
[   93.300159] usb 4-2: device not accepting address 8, error -71
[   93.420169] usb 4-2: new full speed USB device using uhci_hcd and address 9
[   93.840069] usb 4-2: device not accepting address 9, error -71
[   93.840108] hub 4-0:1.0: unable to enumerate USB device on port 2
[  116.306847] show_signal_msg: 15 callbacks suppressed
[  116.306853] gksu[2311]: segfault at 500000160 ip 00007fb780503ed0 sp 00007fff15b65f50 error 4 in libgdk-x11-2.0.so.0.2400.4[7fb7804e1000+ae000]
[  152.074161] exe (2551): /proc/2551/oom_adj is deprecated, please use /proc/2551/oom_score_adj instead.
[  163.933373] CE: hpet increased min_delta_ns to 30169 nsec
[  468.520204] usb 4-2: new full speed USB device using uhci_hcd and address 10
[  468.650239] usb 4-2: device descriptor read/64, error -71
[  468.890178] usb 4-2: device descriptor read/64, error -71
[  469.120228] usb 4-2: new full speed USB device using uhci_hcd and address 11
[  469.250234] usb 4-2: device descriptor read/64, error -71
[  469.490277] usb 4-2: device descriptor read/64, error -71
[  469.720267] usb 4-2: new full speed USB device using uhci_hcd and address 12
[  470.140104] usb 4-2: device not accepting address 12, error -71
[  470.260194] usb 4-2: new full speed USB device using uhci_hcd and address 13
[  470.680061] usb 4-2: device not accepting address 13, error -71
[  470.680101] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 1367.316473] CE: hpet increased min_delta_ns to 45253 nsec
[ 1847.848522] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1929.558213] WARNING! power/level is deprecated; use power/control instead
[ 1929.650256] usb 1-1: USB disconnect, address 2
[ 2010.353949] tg3 0000:04:00.0: PME# enabled
[ 2010.354090] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 2010.593323] wlan0: deauthenticating from 00:22:15:37:35:fa by local choice (reason=3)
[ 2010.670387] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2010.670414] cfg80211: Restoring regulatory settings
[ 2010.670444] cfg80211: Calling CRDA to update world regulatory domain
[ 2010.683943] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2010.683947] cfg80211: World regulatory domain updated:
[ 2010.683949] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2010.683974] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2010.683976] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2010.683979] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2010.683981] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2010.684006] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2012.471029] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 2020.270619] PM: Syncing filesystems ... done.
[ 2020.284211] PM: Preparing system for mem sleep
[ 2020.284276] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2020.300402] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 2020.320470] PM: Entering mem sleep
[ 2020.320528] Suspending console(s) (use no_console_suspend to debug)
[ 2020.322847] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2020.323129] sd 2:0:0:0: [sda] Stopping disk
[ 2020.480241] PM: suspend of drv:tpm_tis dev:00:08 complete after 118.281 msecs
[ 2020.483697] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 2020.483861] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 2020.483896] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 2020.483929] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 2020.483961] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 2020.484824] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 2020.484858] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 2020.484913] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 2020.486157] ACPI handle has no context!
[ 2020.486164] sdhci-pci 0000:0e:06.1: PCI INT B disabled
[ 2020.486192] ACPI handle has no context!
[ 2020.500167] ACPI handle has no context!
[ 2020.590261] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 2020.610063] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 126.001 msecs
[ 2020.831464] PM: suspend of drv:sd dev:2:0:0:0 complete after 508.644 msecs
[ 2020.831496] PM: suspend of drv:scsi dev:target2:0:0 complete after 508.679 msecs
[ 2020.831556] PM: suspend of drv:scsi dev:host2 complete after 508.334 msecs
[ 2020.850062] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 366.891 msecs
[ 2020.850122] PM: suspend of drv: dev:pci0000:00 complete after 365.108 msecs
[ 2020.850154] PM: suspend of devices complete after 528.255 msecs
[ 2020.850156] PM: suspend devices took 0.530 seconds
[ 2020.911198] PM: late suspend of devices complete after 61.062 msecs
[ 2020.911598] ACPI: Preparing to enter system sleep state S3
[ 2020.912039] PM: Saving platform NVS memory
[ 2020.912774] Disabling non-boot CPUs ...
[ 2021.030107] CPU 1 is now offline
[ 2021.031613] Extended CMOS year: 2000
[ 2021.031613] Back to C!
[ 2021.031613] PM: Restoring platform NVS memory
[ 2021.031613] CPU0: Thermal monitoring handled by SMI
[ 2021.031613] Extended CMOS year: 2000
[ 2021.031613] Enabling non-boot CPUs ...
[ 2021.031613] Booting Node 0 Processor 1 APIC 0x1
[ 2020.921613] CPU1: Thermal monitoring handled by SMI
[ 2021.200014] Switched to NOHz mode on CPU #1
[ 2021.200074] CPU1 is up
[ 2021.200706] ACPI: Waking up from system sleep state S3
[ 2021.201556] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2021.201629] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2021.201699] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2021.201766] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 2021.201855] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 2021.201913] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xbff0bc00, writing 0xc030c000)
[ 2021.201928] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 2021.202023] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2021.202120] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2021.202213] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0xb7f0b400, writing 0xc070c040)
[ 2021.202230] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2021.202309] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc0b1c0a1)
[ 2021.202316] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xc090c080)
[ 2021.202326] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[ 2021.202339] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2021.202424] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc0d1c0c1)
[ 2021.202432] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0, writing 0x8080)
[ 2021.202450] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2021.202556] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2021.202622] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2021.202690] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2021.202763] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 2021.202960] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 2021.203020] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 2021.203092] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0e00000)
[ 2021.203152] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[ 2021.203159] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[ 2021.203346] tg3 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x44120000)
[ 2021.203404] tg3 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2021.203423] tg3 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[ 2021.203575] iwlagn 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 2021.203613] iwlagn 0000:0c:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8000004)
[ 2021.203623] iwlagn 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2021.203635] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100106)
[ 2021.203751] firewire_ohci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 2021.203753] firewire_ohci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
[ 2021.203788] sdhci-pci 0000:0e:06.1: restoring config space at offset 0x1 (was 0x2100102, writing 0x2100106)
[ 2021.204461] PM: early resume of devices complete after 3.111 msecs
[ 2021.204610] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2021.204618] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2021.204645] usb usb3: root hub lost power or was reset
[ 2021.204653] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2021.204663] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2021.204663] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2021.204672] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2021.204695] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2021.204694] usb usb4: root hub lost power or was reset
[ 2021.204703] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2021.204736] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2021.204744] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2021.204768] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 2021.204775] usb usb5: root hub lost power or was reset
[ 2021.204789] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2021.204796] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2021.204825] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2021.204826] usb usb6: root hub lost power or was reset
[ 2021.204835] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2021.204844] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2021.204854] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2021.204865] usb usb7: root hub lost power or was reset
[ 2021.204881] pci 0000:00:1e.0: setting latency timer to 64
[ 2021.204899] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2021.204905] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2021.204924] ahci 0000:00:1f.2: setting latency timer to 64
[ 2021.204996] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 2021.205027] tg3 0000:04:00.0: PME# disabled
[ 2021.206649] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 2021.206653] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2021.208430] sd 2:0:0:0: [sda] Starting disk
[ 2021.280850] firewire_core: skipped bus generations, destroying all nodes
[ 2021.330092] PM: resume of drv:usb dev:usb7 complete after 121.814 msecs
[ 2021.330104] PM: resume of drv:hub dev:7-0:1.0 complete after 121.801 msecs
[ 2021.330112] PM: resume of drv: dev:ep_00 complete after 121.761 msecs
[ 2021.330117] PM: resume of drv: dev:ep_81 complete after 121.790 msecs
[ 2021.330136] PM: resume of drv:usb dev:usb6 complete after 121.975 msecs
[ 2021.330145] PM: resume of drv:hub dev:6-0:1.0 complete after 121.950 msecs
[ 2021.330152] PM: resume of drv: dev:ep_00 complete after 121.904 msecs
[ 2021.330157] PM: resume of drv: dev:ep_81 complete after 121.936 msecs
[ 2021.330192] PM: resume of drv:usb dev:usb3 complete after 122.349 msecs
[ 2021.330202] PM: resume of drv:hub dev:3-0:1.0 complete after 122.347 msecs
[ 2021.330209] PM: resume of drv: dev:ep_00 complete after 122.285 msecs
[ 2021.330215] PM: resume of drv: dev:ep_81 complete after 122.318 msecs
[ 2021.372721] PM: resume of drv:usb dev:usb2 complete after 164.907 msecs
[ 2021.372738] PM: resume of drv:hub dev:2-0:1.0 complete after 164.913 msecs
[ 2021.372746] PM: resume of drv: dev:ep_00 complete after 164.909 msecs
[ 2021.372753] PM: resume of drv: dev:ep_81 complete after 164.922 msecs
[ 2021.440100] PM: resume of drv:usb dev:usb4 complete after 232.149 msecs
[ 2021.440111] PM: resume of drv:hub dev:4-0:1.0 complete after 232.129 msecs
[ 2021.440119] PM: resume of drv: dev:ep_00 complete after 232.089 msecs
[ 2021.440126] PM: resume of drv: dev:ep_81 complete after 232.120 msecs
[ 2021.440134] PM: resume of drv:usb dev:usb5 complete after 232.080 msecs
[ 2021.440145] PM: resume of drv:hub dev:5-0:1.0 complete after 232.061 msecs
[ 2021.440153] PM: resume of drv: dev:ep_00 complete after 232.018 msecs
[ 2021.440201] PM: resume of drv: dev:ep_81 complete after 232.090 msecs
[ 2021.480092] PM: resume of drv:usb dev:usb1 complete after 272.321 msecs
[ 2021.480104] PM: resume of drv:hub dev:1-0:1.0 complete after 272.315 msecs
[ 2021.480112] PM: resume of drv: dev:ep_00 complete after 272.307 msecs
[ 2021.480125] PM: resume of drv: dev:ep_81 complete after 272.327 msecs
[ 2021.550195] ata5: SATA link down (SStatus 0 SControl 300)
[ 2021.550302] ata4: SATA link down (SStatus 0 SControl 300)
[ 2021.561062] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2021.561066] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 2021.600991] ata1.00: configured for UDMA/33
[ 2021.710094] usb 5-1: reset low speed USB device using uhci_hcd and address 2
[ 2021.780114] firewire_core: rediscovered device fw0
[ 2021.790433] PM: resume of drv:battery dev:PNP0C0A:00 complete after 510.057 msecs
[ 2021.826871] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 621.953 msecs
[ 2022.029105] PM: resume of drv:usb dev:5-1 complete after 820.469 msecs
[ 2022.029149] PM: resume of drv: dev:ep_00 complete after 820.391 msecs
[ 2022.029155] PM: resume of drv:usbhid dev:5-1:1.0 complete after 820.491 msecs
[ 2022.029170] PM: resume of drv:usbhid dev:5-1:1.1 complete after 820.460 msecs
[ 2022.029191] PM: resume of drv: dev:ep_81 complete after 820.505 msecs
[ 2022.029195] PM: resume of drv: dev:ep_82 complete after 820.461 msecs
[ 2022.120081] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 2022.288843] PM: resume of drv:usb dev:1-2 complete after 1080.326 msecs
[ 2022.288873] PM: resume of drv: dev:ep_00 complete after 1080.262 msecs
[ 2022.288879] PM: resume of drv:uvcvideo dev:1-2:1.0 complete after 1080.338 msecs
[ 2022.288894] PM: resume of drv:uvcvideo dev:1-2:1.1 complete after 1080.307 msecs
[ 2022.288910] PM: resume of drv: dev:ep_83 complete after 1080.347 msecs
[ 2022.770085] PM: resume of drv:tpm_tis dev:00:08 complete after 979.170 msecs
[ 2023.830088] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2023.831249] ata3.00: unexpected _GTF length (8)
[ 2023.838220] ata3.00: unexpected _GTF length (8)
[ 2023.838710] ata3.00: configured for UDMA/133
[ 2023.869281] PM: resume of drv:sd dev:2:0:0:0 complete after 2660.839 msecs
[ 2023.869313] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 1082.746 msecs
[ 2023.869318] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2660.828 msecs
[ 2024.050180] PM: resume of devices complete after 2845.605 msecs
[ 2024.050450] PM: resume devices took 2.850 seconds
[ 2024.050479] PM: Finishing wakeup.
[ 2024.050481] Restarting tasks ... done.
[ 2024.056607] video LNXVIDEO:00: Restoring backlight state
[ 2024.340087] usb 4-2: new full speed USB device using uhci_hcd and address 14
[ 2024.412952] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 2024.442238] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2024.470058] usb 4-2: device descriptor read/64, error -71
[ 2024.700187] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2024.710037] usb 4-2: device descriptor read/64, error -71
[ 2024.940053] usb 4-2: new full speed USB device using uhci_hcd and address 15
[ 2025.070090] usb 4-2: device descriptor read/64, error -71
[ 2025.310061] usb 4-2: device descriptor read/64, error -71
[ 2025.540087] usb 4-2: new full speed USB device using uhci_hcd and address 16
[ 2025.960041] usb 4-2: device not accepting address 16, error -71
[ 2025.986474] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[ 2026.090036] usb 4-2: new full speed USB device using uhci_hcd and address 17
[ 2026.510061] usb 4-2: device not accepting address 17, error -71
[ 2026.510082] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 2027.181161] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0
[ 2028.350431] wlan0: authenticate with 00:13:c4:0d:d4:20 (try 1)
[ 2028.352269] wlan0: authenticated
[ 2028.352372] wlan0: associate with 00:13:c4:0d:d4:20 (try 1)
[ 2028.354206] wlan0: RX AssocResp from 00:13:c4:0d:d4:20 (capab=0x421 status=0 aid=6)
[ 2028.354214] wlan0: associated
[ 2028.382877] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2106.870757] tg3 0000:04:00.0: PME# enabled
[ 2106.870778] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 2107.109702] wlan0: deauthenticating from 00:13:c4:0d:d4:20 by local choice (reason=3)
[ 2107.112275] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2107.112288] cfg80211: Restoring regulatory settings
[ 2107.112300] cfg80211: Calling CRDA to update world regulatory domain
[ 2107.121988] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2107.121999] cfg80211: World regulatory domain updated:
[ 2107.122004] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2107.122012] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2107.122020] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2107.122027] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2107.122034] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2107.122041] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2108.309006] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 2111.057468] PM: Syncing filesystems ... done.
[ 2111.061577] PM: Preparing system for mem sleep
[ 2111.061588] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2111.080155] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 2111.100345] PM: Entering mem sleep
[ 2111.100360] Suspending console(s) (use no_console_suspend to debug)
[ 2111.140300] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2111.174070] sd 2:0:0:0: [sda] Stopping disk
[ 2111.290124] PM: suspend of drv:tpm_tis dev:00:08 complete after 115.373 msecs
[ 2111.291305] ACPI handle has no context!
[ 2111.291315] sdhci-pci 0000:0e:06.1: PCI INT B disabled
[ 2111.291326] ACPI handle has no context!
[ 2111.291391] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 2111.291406] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 2111.291420] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 2111.291433] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 2111.291959] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 2111.291970] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 2111.291982] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 2111.292098] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 2111.310071] ACPI handle has no context!
[ 2111.400104] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 2111.420020] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 128.549 msecs
[ 2111.676898] PM: suspend of drv:sd dev:2:0:0:0 complete after 536.604 msecs
[ 2111.676916] PM: suspend of drv:scsi dev:target2:0:0 complete after 536.589 msecs
[ 2111.676928] PM: suspend of drv:scsi dev:host2 complete after 536.581 msecs
[ 2111.690019] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 398.669 msecs
[ 2111.690034] PM: suspend of drv: dev:pci0000:00 complete after 398.036 msecs
[ 2111.690044] PM: suspend of devices complete after 589.245 msecs
[ 2111.690046] PM: suspend devices took 0.590 seconds
[ 2111.750291] PM: late suspend of devices complete after 60.240 msecs
[ 2111.750664] ACPI: Preparing to enter system sleep state S3
[ 2111.750784] PM: Saving platform NVS memory
[ 2111.750966] Disabling non-boot CPUs ...
[ 2111.870069] CPU 1 is now offline
[ 2111.870464] Extended CMOS year: 2000
[ 2111.870464] Back to C!
[ 2111.870464] PM: Restoring platform NVS memory
[ 2111.870464] CPU0: Thermal monitoring handled by SMI
[ 2111.870464] Extended CMOS year: 2000
[ 2111.870464] Enabling non-boot CPUs ...
[ 2111.870464] Booting Node 0 Processor 1 APIC 0x1
[ 2111.761160] CPU1: Thermal monitoring handled by SMI
[ 2112.040019] Switched to NOHz mode on CPU #1
[ 2112.040079] CPU1 is up
[ 2112.040712] ACPI: Waking up from system sleep state S3
[ 2112.041542] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2112.041611] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2112.041674] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2112.041747] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 2112.041846] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 2112.041908] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xbff0bc00, writing 0xc030c000)
[ 2112.041926] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 2112.042017] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2112.042110] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2112.042194] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0xb7f0b400, writing 0xc070c040)
[ 2112.042209] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2112.042308] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc0b1c0a1)
[ 2112.042317] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xc090c080)
[ 2112.042324] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[ 2112.042347] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2112.042421] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc0d1c0c1)
[ 2112.042429] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0xf0, writing 0x8080)
[ 2112.042445] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2112.042542] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2112.042604] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2112.042669] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 2112.042747] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 2112.042945] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 2112.042995] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 2112.043068] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0e00000)
[ 2112.043129] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[ 2112.043136] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[ 2112.043321] tg3 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x44120000)
[ 2112.043379] tg3 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2112.043398] tg3 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[ 2112.043553] iwlagn 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 2112.043591] iwlagn 0000:0c:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8000004)
[ 2112.043600] iwlagn 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2112.043613] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[ 2112.043725] firewire_ohci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 2112.043727] firewire_ohci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
[ 2112.043762] sdhci-pci 0000:0e:06.1: restoring config space at offset 0x1 (was 0x2100102, writing 0x2100106)
[ 2112.044435] PM: early resume of devices complete after 3.080 msecs
[ 2112.044584] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2112.044592] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2112.044619] usb usb3: root hub lost power or was reset
[ 2112.044636] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2112.044645] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2112.044676] usb usb4: root hub lost power or was reset
[ 2112.044693] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2112.044703] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2112.044757] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2112.044765] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2112.044843] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 2112.044914] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2112.044912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2112.044921] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2112.044921] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2112.044952] usb usb5: root hub lost power or was reset
[ 2112.044952] usb usb6: root hub lost power or was reset
[ 2112.044969] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2112.044973] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2112.044981] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2112.044981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2112.045009] usb usb7: root hub lost power or was reset
[ 2112.045010] pci 0000:00:1e.0: setting latency timer to 64
[ 2112.045022] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2112.045030] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2112.045038] ahci 0000:00:1f.2: setting latency timer to 64
[ 2112.045106] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 2112.045156] tg3 0000:04:00.0: PME# disabled
[ 2112.046291] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 2112.046295] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2112.046743] sd 2:0:0:0: [sda] Starting disk
[ 2112.120414] firewire_core: skipped bus generations, destroying all nodes
[ 2112.170082] PM: resume of drv:usb dev:usb3 complete after 123.600 msecs
[ 2112.170142] PM: resume of drv:usb dev:usb6 complete after 123.546 msecs
[ 2112.170166] PM: resume of drv:usb dev:usb7 complete after 123.528 msecs
[ 2112.170176] PM: resume of drv:hub dev:3-0:1.0 complete after 123.686 msecs
[ 2112.170184] PM: resume of drv: dev:ep_00 complete after 123.681 msecs
[ 2112.170190] PM: resume of drv:hub dev:6-0:1.0 complete after 123.579 msecs
[ 2112.170197] PM: resume of drv: dev:ep_00 complete after 123.568 msecs
[ 2112.170202] PM: resume of drv:hub dev:7-0:1.0 complete after 123.549 msecs
[ 2112.170210] PM: resume of drv: dev:ep_00 complete after 123.539 msecs
[ 2112.170215] PM: resume of drv: dev:ep_81 complete after 123.720 msecs
[ 2112.170221] PM: resume of drv: dev:ep_81 complete after 123.601 msecs
[ 2112.170226] PM: resume of drv: dev:ep_81 complete after 123.564 msecs
[ 2112.212745] PM: resume of drv:usb dev:usb2 complete after 166.293 msecs
[ 2112.212757] PM: resume of drv:hub dev:2-0:1.0 complete after 166.300 msecs
[ 2112.212764] PM: resume of drv: dev:ep_00 complete after 166.293 msecs
[ 2112.212773] PM: resume of drv: dev:ep_81 complete after 166.311 msecs
[ 2112.280087] PM: resume of drv:usb dev:usb4 complete after 233.576 msecs
[ 2112.280101] PM: resume of drv:usb dev:usb5 complete after 233.548 msecs
[ 2112.280113] PM: resume of drv:hub dev:4-0:1.0 complete after 233.586 msecs
[ 2112.280121] PM: resume of drv: dev:ep_00 complete after 233.577 msecs
[ 2112.280128] PM: resume of drv:hub dev:5-0:1.0 complete after 233.559 msecs
[ 2112.280136] PM: resume of drv: dev:ep_00 complete after 233.549 msecs
[ 2112.280185] PM: resume of drv: dev:ep_81 complete after 233.650 msecs
[ 2112.280192] PM: resume of drv: dev:ep_81 complete after 233.614 msecs
[ 2112.320074] PM: resume of drv:usb dev:usb1 complete after 273.668 msecs
[ 2112.320087] PM: resume of drv:hub dev:1-0:1.0 complete after 273.663 msecs
[ 2112.320095] PM: resume of drv: dev:ep_00 complete after 273.656 msecs
[ 2112.320109] PM: resume of drv: dev:ep_81 complete after 273.676 msecs
[ 2112.341064] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2112.341067] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 2112.380529] ata1.00: configured for UDMA/33
[ 2112.390167] ata5: SATA link down (SStatus 0 SControl 300)
[ 2112.390276] ata4: SATA link down (SStatus 0 SControl 300)
[ 2112.550081] usb 5-1: reset low speed USB device using uhci_hcd and address 2
[ 2112.667421] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 622.374 msecs
[ 2112.667546] firewire_core: rediscovered device fw0
[ 2112.700361] PM: resume of drv:ac dev:ACPI0003:00 complete after 655.502 msecs
[ 2112.869607] PM: resume of drv:usb dev:5-1 complete after 822.771 msecs
[ 2112.869638] PM: resume of drv: dev:ep_00 complete after 822.757 msecs
[ 2112.869644] PM: resume of drv:usbhid dev:5-1:1.0 complete after 822.795 msecs
[ 2112.869657] PM: resume of drv:usbhid dev:5-1:1.1 complete after 822.795 msecs
[ 2112.869662] PM: resume of drv: dev:ep_81 complete after 822.809 msecs
[ 2112.869678] PM: resume of drv: dev:ep_82 complete after 822.808 msecs
[ 2112.960246] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 2113.128979] PM: resume of drv:usb dev:1-2 complete after 1082.188 msecs
[ 2113.129009] PM: resume of drv: dev:ep_00 complete after 1082.183 msecs
[ 2113.129015] PM: resume of drv:uvcvideo dev:1-2:1.0 complete after 1082.213 msecs
[ 2113.129028] PM: resume of drv:uvcvideo dev:1-2:1.1 complete after 1082.211 msecs
[ 2113.129033] PM: resume of drv: dev:ep_83 complete after 1082.225 msecs
[ 2113.280389] PM: resume of drv:battery dev:PNP0C0A:00 complete after 580.014 msecs
[ 2114.240281] PM: resume of drv:tpm_tis dev:00:08 complete after 959.755 msecs
[ 2114.670053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2114.671217] ata3.00: unexpected _GTF length (8)
[ 2114.680508] ata3.00: unexpected _GTF length (8)
[ 2114.680998] ata3.00: configured for UDMA/133
[ 2114.722661] PM: resume of drv:sd dev:2:0:0:0 complete after 2675.916 msecs
[ 2114.722671] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 467.376 msecs
[ 2114.722812] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2676.032 msecs
[ 2114.900153] PM: resume of devices complete after 2855.605 msecs
[ 2114.900392] PM: resume devices took 2.860 seconds
[ 2114.900424] PM: Finishing wakeup.
[ 2114.900425] Restarting tasks ... done.
[ 2114.914448] video LNXVIDEO:00: Restoring backlight state
[ 2115.191464] usb 4-2: new full speed USB device using uhci_hcd and address 18
[ 2115.222726] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 2115.282918] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2115.320078] usb 4-2: device descriptor read/64, error -71
[ 2115.529497] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2115.560050] usb 4-2: device descriptor read/64, error -71
[ 2115.790057] usb 4-2: new full speed USB device using uhci_hcd and address 19
[ 2115.920176] usb 4-2: device descriptor read/64, error -71
[ 2116.160108] usb 4-2: device descriptor read/64, error -71
[ 2116.540083] usb 4-2: new full speed USB device using uhci_hcd and address 20
[ 2116.798073] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[ 2116.960028] usb 4-2: device not accepting address 20, error -71
[ 2117.090250] usb 4-2: new full speed USB device using uhci_hcd and address 21
[ 2117.510049] usb 4-2: device not accepting address 21, error -71
[ 2117.510069] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 2119.210846] wlan0: authenticate with 00:22:15:37:35:fa (try 1)
[ 2119.212722] wlan0: authenticated
[ 2119.212779] wlan0: associate with 00:22:15:37:35:fa (try 1)
[ 2119.216255] wlan0: RX AssocResp from 00:22:15:37:35:fa (capab=0x411 status=0 aid=1)
[ 2119.216265] wlan0: associated
[ 2119.244262] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2129.780150] wlan0: no IPv6 routers present
[ 2150.966641] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0