[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu1) ) #41-Ubuntu SMP Tue Apr 5 19:30:49 UTC 2011 (Ubuntu 2.6.38-8.41-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=/dev/mapper/vg_main-natty_64 ro clock=hpet quiet splash rootdelay=10 vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000094000 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable) [ 0.000000] BIOS-e820: 00000000cfcf0000 - 00000000cfcf3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfcf3000 - 00000000cfd00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000210000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS F7c 05/04/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x210000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable [ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 5 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 6 base 000200000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f4450] f4450 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfcf0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfcf0000 page 4k [ 0.000000] kernel direct mapping tables up to cfcf0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000210000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0210000000 page 2M [ 0.000000] kernel direct mapping tables up to 210000000 @ cfcee000-cfcf0000 [ 0.000000] RAMDISK: 357e8000 - 36bec000 [ 0.000000] ACPI: RSDP 00000000000f5df0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfcf3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfcf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfcf30c0 076F9 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfcf0000 00040 [ 0.000000] ACPI: SSDT 00000000cfcfa880 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfcfb780 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfcfb7c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000cfcfb800 0048A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfcfa7c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000210000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000210000000 [ 0.000000] NODE_DATA [000000020fffb000 - 000000020fffffff] [ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD -> [ffff880208600000-ffff88020effffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00210000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000094 [ 0.000000] 0: 0x00000100 -> 0x000cfcf0 [ 0.000000] 0: 0x00100000 -> 0x00210000 [ 0.000000] On node 0 totalpages: 1965172 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3910 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 832808 pages, LIFO batch:31 [ 0.000000] Normal zone: 15232 pages used for memmap [ 0.000000] Normal zone: 1098880 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf3000 [ 0.000000] PM: Registered nosave memory: 00000000cfcf3000 - 00000000cfd00000 [ 0.000000] PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfa00000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1935598 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=/dev/mapper/vg_main-natty_64 ro clock=hpet quiet splash rootdelay=10 vt.handoff=7 [ 0.000000] Warning! clock= boot option is deprecated. Use clocksource=xyz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 7585648k/8650752k available (5940k kernel code, 790064k absent, 275040k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 78643200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3214.304 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.60 BogoMIPS (lpj=32143040) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000034] AppArmor: AppArmor initialized [ 0.000035] Yama: becoming mindful. [ 0.000535] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011107] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012074] Mount-cache hash table entries: 256 [ 0.012170] Initializing cgroup subsys ns [ 0.012172] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.012174] Initializing cgroup subsys cpuacct [ 0.012177] Initializing cgroup subsys memory [ 0.012184] Initializing cgroup subsys devices [ 0.012186] Initializing cgroup subsys freezer [ 0.012187] Initializing cgroup subsys net_cls [ 0.012188] Initializing cgroup subsys blkio [ 0.012211] tseg: 00cfe00000 [ 0.012212] CPU: Physical Processor ID: 0 [ 0.012213] CPU: Processor Core ID: 0 [ 0.012215] mce: CPU supports 6 MCE banks [ 0.012222] using C1E aware idle routine [ 0.013321] ACPI: Core revision 20110112 [ 0.020030] ftrace: allocating 24314 entries in 96 pages [ 0.034717] Setting APIC routing to flat [ 0.035092] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.135110] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.140000] Performance Events: AMD PMU driver. [ 0.140000] ... version: 0 [ 0.140000] ... bit width: 48 [ 0.140000] ... generic registers: 4 [ 0.140000] ... value mask: 0000ffffffffffff [ 0.140000] ... max period: 00007fffffffffff [ 0.140000] ... fixed-purpose events: 0 [ 0.140000] ... event mask: 000000000000000f [ 0.140000] Booting Node 0, Processors #1 [ 0.300012] System has AMD C1E enabled [ 0.300026] Switch to broadcast mode on CPU1 [ 0.300049] #2 [ 0.470015] Switch to broadcast mode on CPU2 [ 0.470053] #3 [ 0.640016] Switch to broadcast mode on CPU3 [ 0.640075] #4 [ 0.810026] Switch to broadcast mode on CPU4 [ 0.810081] #5 [ 0.980026] Brought up 6 CPUs [ 0.980040] Total of 6 processors activated (38570.41 BogoMIPS). [ 0.980019] Switch to broadcast mode on CPU5 [ 0.983025] Switch to broadcast mode on CPU0 [ 0.983025] devtmpfs: initialized [ 0.983025] print_constraints: dummy: [ 0.983025] Time: 11:32:36 Date: 04/06/11 [ 0.983025] NET: Registered protocol family 16 [ 0.983025] node 0 link 0: io port [a000, ffff] [ 0.983025] TOM: 00000000d0000000 aka 3328M [ 0.983025] Fam 10h mmconf [e0000000, e00fffff] [ 0.983025] node 0 link 0: mmio [a0000, bffff] [ 0.983025] node 0 link 0: mmio [d0000000, dfffffff] [ 0.983025] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.983025] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff] [ 0.983025] TOM2: 0000000230000000 aka 8960M [ 0.983025] bus: [00, 05] on node 0 link 0 [ 0.983025] bus: 00 index 0 [io 0x0000-0xffff] [ 0.983025] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.983025] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.983025] bus: 00 index 3 [mem 0xe0600000-0xffffffff] [ 0.983025] bus: 00 index 4 [mem 0xe0100000-0xe05fffff] [ 0.983025] bus: 00 index 5 [mem 0x230000000-0xfcffffffff] [ 0.983025] Extended Config Space enabled on 1 nodes [ 0.983025] ACPI: bus type pci registered [ 0.983025] Trying to unpack rootfs image as initramfs... [ 0.983025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.983025] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.998764] PCI: Using configuration type 1 for base access [ 0.999168] bio: create slab at 0 [ 0.999168] ACPI: EC: Look up EC in DSDT [ 1.000996] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 1.000998] [ 1.001001] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 1.001003] [ 1.001026] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 1.001027] [ 1.001030] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 1.001032] [ 1.004292] ACPI Warning: Incorrect checksum in table [TAMG] - 0x31, should be 0x30 (20110112/tbutils-314) [ 1.004391] ACPI: Interpreter enabled [ 1.004394] ACPI: (supports S0 S3 S4 S5) [ 1.004407] ACPI: Using IOAPIC for interrupt routing [ 1.225589] Freeing initrd memory: 20496k freed [ 1.521620] ACPI: No dock devices found. [ 1.521622] HEST: Table not found. [ 1.521625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.521664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.521734] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.521735] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.521737] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.521739] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 1.521740] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] [ 1.521751] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 1.521761] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 1.521787] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 1.521813] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604 [ 1.521834] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.521836] pci 0000:00:05.0: PME# disabled [ 1.521849] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 1.521869] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.521871] pci 0000:00:0a.0: PME# disabled [ 1.521892] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 1.521907] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 1.521914] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 1.521920] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 1.521927] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 1.521934] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 1.521941] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 1.521980] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 1.521989] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 1.522038] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 1.522051] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff] [ 1.522099] pci 0000:00:12.2: supports D1 D2 [ 1.522101] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.522103] pci 0000:00:12.2: PME# disabled [ 1.522119] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 1.522129] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 1.522177] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 1.522190] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff] [ 1.522239] pci 0000:00:13.2: supports D1 D2 [ 1.522240] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.522243] pci 0000:00:13.2: PME# disabled [ 1.522257] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 1.522310] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 1.522325] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 1.522366] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.522368] pci 0000:00:14.2: PME# disabled [ 1.522377] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 1.522429] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 1.522457] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 1.522467] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff] [ 1.522514] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 1.522552] pci 0000:00:15.0: supports D1 D2 [ 1.522573] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 1.522582] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff] [ 1.522631] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 1.522644] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff] [ 1.522693] pci 0000:00:16.2: supports D1 D2 [ 1.522694] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.522697] pci 0000:00:16.2: PME# disabled [ 1.522710] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 1.522721] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 1.522730] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 1.522739] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 1.522750] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 1.522782] pci 0000:01:05.0: [1002:9714] type 0 class 0x000300 [ 1.522788] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 1.522792] pci 0000:01:05.0: reg 14: [io 0xde00-0xdeff] [ 1.522795] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff] [ 1.522803] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff] [ 1.522812] pci 0000:01:05.0: supports D1 D2 [ 1.522821] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403 [ 1.522827] pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff] [ 1.522846] pci 0000:01:05.1: supports D1 D2 [ 1.522873] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.522876] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.522878] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 1.522880] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.522909] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03 [ 1.522923] pci 0000:02:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit] [ 1.522974] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.522977] pci 0000:02:00.0: PME# disabled [ 1.540049] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 1.540061] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 1.540070] pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.540080] pci 0000:00:05.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.540149] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 1.540172] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff] [ 1.540202] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 1.540226] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 1.540237] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.540270] pci 0000:03:00.0: supports D1 D2 [ 1.540271] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.540275] pci 0000:03:00.0: PME# disabled [ 1.560049] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 1.560060] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.560068] pci 0000:00:0a.0: bridge window [mem 0xfd600000-0xfd6fffff] [ 1.560078] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.560143] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00 [ 1.560172] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff] [ 1.560189] pci 0000:04:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff] [ 1.560267] pci 0000:04:0e.0: supports D1 D2 [ 1.560269] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 1.560273] pci 0000:04:0e.0: PME# disabled [ 1.560300] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 1.560303] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.560306] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 1.560309] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 1.560311] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.560313] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.560315] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.560316] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 1.560318] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 1.560366] pci 0000:05:00.0: [197b:2363] type 0 class 0x000106 [ 1.560450] pci 0000:05:00.0: reg 24: [mem 0xfd9fe000-0xfd9fffff] [ 1.560489] pci 0000:05:00.0: PME# supported from D3hot [ 1.560493] pci 0000:05:00.0: PME# disabled [ 1.560519] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101 [ 1.560541] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07] [ 1.560557] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03] [ 1.560569] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07] [ 1.560581] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03] [ 1.560593] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f] [ 1.560655] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.560666] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 1.560670] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 1.560673] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 1.560677] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 1.560690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.560855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.560878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 1.560913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 1.560932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 1.560950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 1.560971] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.567281] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567306] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567329] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567351] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567373] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567394] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567416] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567438] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 1.567507] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 1.567510] vgaarb: loaded [ 1.567614] SCSI subsystem initialized [ 1.567635] libata version 3.00 loaded. [ 1.567635] usbcore: registered new interface driver usbfs [ 1.567635] usbcore: registered new interface driver hub [ 1.567635] usbcore: registered new device driver usb [ 1.567635] wmi: Mapper loaded [ 1.567635] PCI: Using ACPI for IRQ routing [ 1.567635] PCI: pci_cache_line_size set to 64 bytes [ 1.567635] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 1.567635] reserve RAM buffer: 0000000000094000 - 000000000009ffff [ 1.567635] reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff [ 1.567635] NetLabel: Initializing [ 1.567635] NetLabel: domain hash size = 128 [ 1.567635] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.567635] NetLabel: unlabeled traffic allowed by default [ 1.567635] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.567635] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.570017] Switching to clocksource hpet [ 1.574071] AppArmor: AppArmor Filesystem Enabled [ 1.574086] pnp: PnP ACPI init [ 1.574095] ACPI: bus type pnp registered [ 1.574153] pnp 00:00: [bus 00-ff] [ 1.574155] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.574156] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.574157] pnp 00:00: [io 0x0d00-0xffff window] [ 1.574159] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.574160] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 1.574162] pnp 00:00: [mem 0xcff00000-0xfebfffff window] [ 1.574191] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.574197] pnp 00:01: [io 0x0010-0x001f] [ 1.574198] pnp 00:01: [io 0x0022-0x003f] [ 1.574199] pnp 00:01: [io 0x0044-0x005f] [ 1.574201] pnp 00:01: [io 0x0062-0x0063] [ 1.574202] pnp 00:01: [io 0x0065-0x006f] [ 1.574203] pnp 00:01: [io 0x0074-0x007f] [ 1.574204] pnp 00:01: [io 0x0091-0x0093] [ 1.574205] pnp 00:01: [io 0x00a2-0x00bf] [ 1.574206] pnp 00:01: [io 0x00e0-0x00ef] [ 1.574207] pnp 00:01: [io 0x04d0-0x04d1] [ 1.574209] pnp 00:01: [io 0x0220-0x0225] [ 1.574210] pnp 00:01: [io 0x0290-0x0294] [ 1.574245] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.574247] system 00:01: [io 0x0220-0x0225] has been reserved [ 1.574249] system 00:01: [io 0x0290-0x0294] has been reserved [ 1.574251] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.579918] Switched to NOHz mode on CPU #2 [ 1.579927] Switched to NOHz mode on CPU #1 [ 1.579934] Switched to NOHz mode on CPU #0 [ 1.579942] Switched to NOHz mode on CPU #3 [ 1.579951] Switched to NOHz mode on CPU #4 [ 1.579959] Switched to NOHz mode on CPU #5 [ 1.580434] pnp 00:02: [io 0x4100-0x411f] [ 1.580436] pnp 00:02: [io 0x0228-0x022f] [ 1.580437] pnp 00:02: [io 0x040b] [ 1.580439] pnp 00:02: [io 0x04d6] [ 1.580440] pnp 00:02: [io 0x0c00-0x0c01] [ 1.580441] pnp 00:02: [io 0x0c14] [ 1.580442] pnp 00:02: [io 0x0c50-0x0c52] [ 1.580443] pnp 00:02: [io 0x0c6c-0x0c6d] [ 1.580444] pnp 00:02: [io 0x0c6f] [ 1.580446] pnp 00:02: [io 0x0cd0-0x0cd1] [ 1.580447] pnp 00:02: [io 0x0cd2-0x0cd3] [ 1.580448] pnp 00:02: [io 0x0cd4-0x0cdf] [ 1.580449] pnp 00:02: [io 0x4000-0x40fe] [ 1.580450] pnp 00:02: [io 0x4210-0x4217] [ 1.580452] pnp 00:02: [io 0x0b00-0x0b0f] [ 1.580453] pnp 00:02: [io 0x0b10-0x0b1f] [ 1.580454] pnp 00:02: [io 0x0b20-0x0b3f] [ 1.580455] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 1.580457] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 1.580461] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.580484] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.580522] system 00:02: [io 0x4100-0x411f] has been reserved [ 1.580524] system 00:02: [io 0x0228-0x022f] has been reserved [ 1.580526] system 00:02: [io 0x040b] has been reserved [ 1.580527] system 00:02: [io 0x04d6] has been reserved [ 1.580529] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 1.580531] system 00:02: [io 0x0c14] has been reserved [ 1.580532] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 1.580534] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 1.580536] system 00:02: [io 0x0c6f] has been reserved [ 1.580539] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 1.580541] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 1.580542] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 1.580544] system 00:02: [io 0x4000-0x40fe] has been reserved [ 1.580546] system 00:02: [io 0x4210-0x4217] has been reserved [ 1.580547] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 1.580549] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 1.580551] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 1.580553] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 1.580555] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.580618] pnp 00:03: [dma 4] [ 1.580619] pnp 00:03: [io 0x0000-0x000f] [ 1.580620] pnp 00:03: [io 0x0080-0x0090] [ 1.580621] pnp 00:03: [io 0x0094-0x009f] [ 1.580623] pnp 00:03: [io 0x00c0-0x00df] [ 1.580643] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.580682] pnp 00:04: [io 0x0070-0x0073] [ 1.580693] pnp 00:04: [irq 8] [ 1.580710] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.580714] pnp 00:05: [io 0x0061] [ 1.580731] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.580736] pnp 00:06: [io 0x00f0-0x00ff] [ 1.580741] pnp 00:06: [irq 13] [ 1.580758] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.580923] pnp 00:07: [io 0x03f8-0x03ff] [ 1.580929] pnp 00:07: [irq 4] [ 1.580964] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.580995] pnp 00:08: [mem 0xe0000000-0xefffffff] [ 1.581030] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.581032] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.581107] pnp 00:09: [mem 0x000f0000-0x000f3fff] [ 1.581108] pnp 00:09: [mem 0x000f4000-0x000f7fff] [ 1.581111] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 1.581112] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 1.581114] pnp 00:09: [mem 0xcfcf0000-0xcfcfffff] [ 1.581115] pnp 00:09: [mem 0xffff0000-0xffffffff] [ 1.581117] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 1.581118] pnp 00:09: [mem 0x00100000-0xcfceffff] [ 1.581119] pnp 00:09: [mem 0xcfd00000-0xcfdfffff] [ 1.581120] pnp 00:09: [mem 0xcfe00000-0xcfefffff] [ 1.581122] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.581123] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 1.581124] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 1.581125] pnp 00:09: [mem 0xfff80000-0xfffeffff] [ 1.581128] pnp 00:09: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.581130] pnp 00:09: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.581133] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.581135] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.581137] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.581140] pnp 00:09: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.581182] system 00:09: [mem 0xcfcf0000-0xcfcfffff] could not be reserved [ 1.581184] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 1.581186] system 00:09: [mem 0xcfd00000-0xcfdfffff] has been reserved [ 1.581188] system 00:09: [mem 0xcfe00000-0xcfefffff] could not be reserved [ 1.581189] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.581191] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved [ 1.581193] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.581195] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.581207] pnp: PnP ACPI: found 10 devices [ 1.581208] ACPI: ACPI bus type pnp unregistered [ 1.586643] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.586645] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.586647] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 1.586649] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.586652] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 1.586653] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 1.586656] pci 0000:00:05.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.586658] pci 0000:00:05.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.586662] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 1.586664] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 1.586665] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.586668] pci 0000:00:0a.0: bridge window [mem 0xfd600000-0xfd6fffff] [ 1.586670] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.586672] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 1.586674] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.586678] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 1.586680] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 1.586685] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 1.586687] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 1.586690] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 1.586692] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 1.586709] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.586711] pci 0000:00:05.0: setting latency timer to 64 [ 1.586719] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.586721] pci 0000:00:0a.0: setting latency timer to 64 [ 1.586728] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.586731] pci 0000:00:15.0: setting latency timer to 64 [ 1.586733] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.586735] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.586736] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.586738] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 1.586739] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 1.586741] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.586742] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff] [ 1.586744] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.586745] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.586747] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 1.586748] pci_bus 0000:02: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.586750] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.586751] pci_bus 0000:03: resource 1 [mem 0xfd600000-0xfd6fffff] [ 1.586753] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.586754] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 1.586756] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 1.586757] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 1.586759] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 1.586760] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 1.586762] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 1.586763] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 1.586765] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff] [ 1.586766] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 1.586767] pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff] [ 1.586769] pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 1.586791] NET: Registered protocol family 2 [ 1.586939] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.587928] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.589859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.590148] TCP: Hash tables configured (established 524288 bind 65536) [ 1.590150] TCP reno registered [ 1.590161] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.590211] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.590321] NET: Registered protocol family 1 [ 1.590330] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.670244] pci 0000:01:05.0: Boot video device [ 1.670313] PCI: CLS 4 bytes, default 64 [ 1.671682] PCI-DMA: Disabling AGP. [ 1.673948] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.673949] PCI-DMA: using GART IOMMU. [ 1.673952] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.677287] audit: initializing netlink socket (disabled) [ 1.677302] type=2000 audit(1302089555.670:1): initialized [ 1.685601] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.686731] VFS: Disk quotas dquot_6.5.2 [ 1.686760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.687175] fuse init (API version 7.16) [ 1.687222] msgmni has been set to 14984 [ 1.687449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.687477] io scheduler noop registered [ 1.687478] io scheduler deadline registered [ 1.687500] io scheduler cfq registered (default) [ 1.687696] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.687762] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X [ 1.687908] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.687926] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X [ 1.688060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.688075] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.688171] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.688175] ACPI: Power Button [PWRB] [ 1.688208] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.688210] ACPI: Power Button [PWRF] [ 1.688331] ACPI: acpi_idle registered with cpuidle [ 1.688343] ACPI: processor limited to max C-state 1 [ 1.950629] ERST: Table is not found! [ 1.950673] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.971177] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.150837] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.150997] Linux agpgart interface v0.103 [ 2.151613] brd: module loaded [ 2.151884] loop: module loaded [ 2.151935] i2c-core: driver [adp5520] using legacy suspend method [ 2.151936] i2c-core: driver [adp5520] using legacy resume method [ 2.152079] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.152099] pata_acpi 0000:05:00.1: setting latency timer to 64 [ 2.152110] pata_acpi 0000:05:00.1: PCI INT B disabled [ 2.152461] Fixed MDIO Bus: probed [ 2.152480] PPP generic driver version 2.4.2 [ 2.152516] tun: Universal TUN/TAP device driver, 1.6 [ 2.152517] tun: (C) 1999-2004 Max Krasnyansky [ 2.152590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.152707] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.152743] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.152792] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.200143] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.200153] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.200201] ehci_hcd 0000:00:12.2: debug port 1 [ 2.200251] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 2.220113] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.220254] hub 1-0:1.0: USB hub found [ 2.220256] hub 1-0:1.0: 5 ports detected [ 2.220404] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.220414] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.220441] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.250177] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.250190] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.250214] ehci_hcd 0000:00:13.2: debug port 1 [ 2.250223] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 2.270114] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.270242] hub 2-0:1.0: USB hub found [ 2.270245] hub 2-0:1.0: 5 ports detected [ 2.270406] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.270416] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 2.270441] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.270469] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.270472] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.270487] ehci_hcd 0000:00:16.2: debug port 1 [ 2.270497] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 [ 2.290122] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.290252] hub 3-0:1.0: USB hub found [ 2.290255] hub 3-0:1.0: 4 ports detected [ 2.290327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.290430] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.290441] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.290467] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.290510] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 2.354182] hub 4-0:1.0: USB hub found [ 2.354187] hub 4-0:1.0: 5 ports detected [ 2.354366] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.354378] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.354403] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.354435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 2.414188] hub 5-0:1.0: USB hub found [ 2.414193] hub 5-0:1.0: 5 ports detected [ 2.414371] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.414382] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.414407] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.414438] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 2.474182] hub 6-0:1.0: USB hub found [ 2.474186] hub 6-0:1.0: 2 ports detected [ 2.474361] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.474372] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.474395] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.490202] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 [ 2.540134] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.554195] hub 7-0:1.0: USB hub found [ 2.554199] hub 7-0:1.0: 4 ports detected [ 2.554279] uhci_hcd: USB Universal Host Controller Interface driver [ 2.554334] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.587975] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.587976] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.670116] Refined TSC clocksource calibration: 3214.160 MHz. [ 2.692979] hub 1-2:1.0: USB hub found [ 2.693402] hub 1-2:1.0: 4 ports detected [ 2.830210] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.830335] mousedev: PS/2 mouse device common for all mice [ 2.830391] rtc_cmos 00:04: RTC can wake from S4 [ 2.830485] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.830510] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.830566] device-mapper: uevent: version 1.0.3 [ 2.830611] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.830709] device-mapper: multipath: version 1.2.0 loaded [ 2.830711] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.830802] cpuidle: using governor ladder [ 2.830804] cpuidle: using governor menu [ 2.830938] TCP cubic registered [ 2.831006] NET: Registered protocol family 10 [ 2.831308] NET: Registered protocol family 17 [ 2.831317] Registering the dns_resolver key type [ 2.831418] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00) [ 2.831436] powernow-k8: Core Performance Boosting: on. [ 2.831459] powernow-k8: 0 : pstate 0 (3200 MHz) [ 2.831460] powernow-k8: 1 : pstate 1 (2400 MHz) [ 2.831461] powernow-k8: 2 : pstate 2 (1600 MHz) [ 2.831463] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.831919] PM: Hibernation image not present or could not be loaded. [ 2.831926] registered taskstats version 1 [ 2.832162] Magic number: 7:81:529 [ 2.832264] rtc_cmos 00:04: setting system clock to 2011-04-06 11:32:38 UTC (1302089558) [ 2.832266] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.832268] EDD information not available. [ 2.833383] Freeing unused kernel memory: 956k freed [ 2.833567] Write protecting the kernel read-only data: 10240k [ 2.834251] Freeing unused kernel memory: 184k freed [ 2.837461] Freeing unused kernel memory: 1444k freed [ 2.853754] <30>udev[120]: starting version 167 [ 2.869749] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.869771] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.869805] r8169 0000:03:00.0: setting latency timer to 64 [ 2.869848] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 2.870215] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90011794000, 6c:f0:49:e3:9c:f2, XID 083000c0 IRQ 42 [ 2.876162] ahci 0000:00:11.0: version 3.0 [ 2.876185] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.876231] ahci 0000:00:11.0: irq 43 for MSI/MSI-X [ 2.876319] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.876322] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.877101] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.877125] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 2.877487] scsi0 : ahci [ 2.877861] scsi1 : ahci [ 2.877876] scsi2 : pata_jmicron [ 2.877976] scsi3 : pata_jmicron [ 2.878029] ata7: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17 [ 2.878031] ata8: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17 [ 2.878188] scsi4 : ahci [ 2.878243] scsi5 : ahci [ 2.878682] scsi6 : ahci [ 2.878740] scsi7 : ahci [ 2.878872] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 43 [ 2.878875] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 43 [ 2.878878] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 43 [ 2.878880] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 43 [ 2.878883] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 43 [ 2.878885] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 43 [ 2.878975] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.887743] [drm] Initialized drm 1.1.0 20060810 [ 2.890238] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.890250] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.890262] ahci 0000:05:00.0: setting latency timer to 64 [ 2.890582] scsi8 : ahci [ 2.890653] scsi9 : ahci [ 2.890684] ata9: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe100 irq 17 [ 2.890687] ata10: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe180 irq 17 [ 3.080109] usb 4-5: new low speed USB device using ohci_hcd and address 2 [ 3.240157] ata9: SATA link down (SStatus 0 SControl 300) [ 3.240209] ata10: SATA link down (SStatus 0 SControl 300) [ 3.420129] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.420171] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.420212] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.420247] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.420271] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.420301] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.421026] ata3.00: HPA detected: current 1953523055, native 1953525168 [ 3.421087] ata3.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133 [ 3.421089] ata3.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.421645] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB02, max UDMA/100 [ 3.421921] ata3.00: configured for UDMA/133 [ 3.423597] ata5.00: configured for UDMA/100 [ 3.434807] ata6.00: HPA detected: current 976771055, native 976773168 [ 3.434917] ata6.00: ATA-7: WDC WD5000AAKS-22TMA0, 12.01C01, max UDMA/133 [ 3.434919] ata6.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.435828] ata6.00: configured for UDMA/133 [ 3.439440] ata4.00: HPA detected: current 976771055, native 976773168 [ 3.439545] ata4.00: ATA-7: WDC WD5000AAKS-22TMA0, 12.01C01, max UDMA/133 [ 3.439552] ata4.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.440434] ata4.00: configured for UDMA/133 [ 3.444657] ata2.00: HPA detected: current 1953523055, native 1953525168 [ 3.444767] ata2.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 [ 3.444774] ata2.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.445652] ata2.00: configured for UDMA/133 [ 3.447185] ata1.00: ATA-8: ST31000528AS, CC44, max UDMA/133 [ 3.447193] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.486626] ata1.00: configured for UDMA/133 [ 3.486892] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC44 PQ: 0 ANSI: 5 [ 3.487014] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.487175] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.487196] scsi 1:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 [ 3.487253] sd 0:0:0:0: [sda] Write Protect is off [ 3.487256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.487308] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.487318] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.487376] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.487429] scsi 4:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5 [ 3.487540] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.487557] sd 1:0:0:0: [sdb] Write Protect is off [ 3.487560] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.487562] sd 4:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.487589] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.487655] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 3.487767] sd 5:0:0:0: [sdd] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 3.487776] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 3.487835] sd 5:0:0:0: [sdd] Write Protect is off [ 3.487837] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.487844] sd 4:0:0:0: [sdc] Write Protect is off [ 3.487847] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.487873] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.487878] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.490283] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB02 PQ: 0 ANSI: 5 [ 3.493507] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.493515] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.493745] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 3.493787] sr 6:0:0:0: Attached scsi generic sg4 type 5 [ 3.494042] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 3.494144] sd 7:0:0:0: [sde] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 3.494149] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 3.494275] sd 7:0:0:0: [sde] Write Protect is off [ 3.494278] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.494307] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.496420] sdc: sdc1 sdc2 [ 3.496849] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.499760] sdd: sdd1 sdd2 < sdd5 > [ 3.500155] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.501640] sdb: sdb1 sdb2 < sdb5 > [ 3.502102] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.505129] sde: sde1 sde2 < sde5 > [ 3.505589] sd 7:0:0:0: [sde] Attached SCSI disk [ 3.510393] sda: sda1 sda2 sda3 [ 3.510673] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.516443] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.535032] [drm] radeon defaulting to kernel modesetting. [ 3.535034] [drm] radeon kernel modesetting enabled. [ 3.535157] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.535162] radeon 0000:01:05.0: setting latency timer to 64 [ 3.536419] [drm] initializing kernel modesetting (RS880 0x1002:0x9714). [ 3.536441] [drm] register mmio base: 0xFDEE0000 [ 3.536442] [drm] register mmio size: 65536 [ 3.536774] ATOM BIOS: B43106_DVI [ 3.536789] radeon 0000:01:05.0: VRAM: 624M 0x00000000C0000000 - 0x00000000E6FFFFFF (624M used) [ 3.536791] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 3.540161] [drm] Detected VRAM RAM=624M, BAR=256M [ 3.540164] [drm] RAM width 32bits DDR [ 3.540309] [TTM] Zone kernel: Available graphics memory: 3837340 kiB. [ 3.540311] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 3.540312] [TTM] Initializing pool allocator. [ 3.540329] [drm] radeon: 624M of VRAM memory ready [ 3.540331] [drm] radeon: 512M of GTT memory ready. [ 3.540353] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.540354] [drm] Driver supports precise vblank timestamp query. [ 3.540367] [drm] radeon: irq initialized. [ 3.540373] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.540943] [drm] Loading RS780 Microcode [ 3.541022] usb 1-2.2: new low speed USB device using ehci_hcd and address 4 [ 3.546199] radeon 0000:01:05.0: WB enabled [ 3.577410] [drm] ring test succeeded in 1 usecs [ 3.577479] [drm] radeon: ib pool ready. [ 3.577523] [drm] ib test succeeded in 0 usecs [ 3.577525] [drm] Enabling audio support [ 3.577530] failed to evaluate ATIF got AE_BAD_PARAMETER [ 3.577680] [drm] Radeon Display Connectors [ 3.577682] [drm] Connector 0: [ 3.577683] [drm] VGA [ 3.577684] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 3.577685] [drm] Encoders: [ 3.577687] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.577688] [drm] Connector 1: [ 3.577688] [drm] DVI-D [ 3.577689] [drm] HPD1 [ 3.577691] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 3.577692] [drm] Encoders: [ 3.577693] [drm] DFP1: INTERNAL_KLDSCP_LVTMA [ 3.580172] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.599603] md: bind [ 3.602567] md: bind [ 3.605283] md: raid1 personality registered for level 1 [ 3.605419] bio: create slab at 1 [ 3.605484] md/raid1:md1: active with 2 out of 2 mirrors [ 3.605501] md1: detected capacity change from 0 to 197263360 [ 3.606931] md1: unknown partition table [ 3.625779] md: bind [ 3.631406] [drm] radeon: power management initialized [ 3.631799] md: bind [ 3.644570] md: bind [ 3.649280] md: bind [ 3.651476] md/raid1:md2: active with 2 out of 2 mirrors [ 3.651624] created bitmap (466 pages) for device md2 [ 3.661044] md2: bitmap initialized from disk: read 30/30 pages, set 51 bits [ 3.690836] md2: detected capacity change from 0 to 999905991680 [ 3.699898] md2: unknown partition table [ 3.704606] md: bind [ 3.706052] md/raid1:md3: active with 2 out of 2 mirrors [ 3.706069] md3: detected capacity change from 0 to 499907671040 [ 3.707685] md3: unknown partition table [ 3.708045] [drm] fb mappable at 0xD0141000 [ 3.708059] [drm] vram apper at 0xD0000000 [ 3.708060] [drm] size 9216000 [ 3.708061] [drm] fb depth is 24 [ 3.708061] [drm] pitch is 7680 [ 3.708430] Console: switching to colour frame buffer device 240x75 [ 3.708463] fb0: radeondrmfb frame buffer device [ 3.708465] drm: registered panic notifier [ 3.708470] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 [ 3.710452] md: bind [ 3.712367] md/raid1:md0: active with 2 out of 2 mirrors [ 3.712443] created bitmap (466 pages) for device md0 [ 3.718916] md0: bitmap initialized from disk: read 30/30 pages, set 42 bits [ 3.761028] usb 1-2.4: new low speed USB device using ehci_hcd and address 5 [ 3.784566] md0: detected capacity change from 0 to 499907671040 [ 3.820354] md0: unknown partition table [ 4.090287] firewire_core: created device fw0: GUID 00e94313006cf049, S400 [ 4.584472] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9a.I USB FW:g9a] on usb-0000:00:12.0-5/input0 [ 4.587971] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input2 [ 4.588048] generic-usb 0003:046D:C01E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.2-2.2/input0 [ 4.660385] input: USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.0/input/input3 [ 4.660450] generic-usb 0003:04D9:2013.0003: input,hidraw2: USB HID v1.00 Keyboard [ USB Keyboard] on usb-0000:00:12.2-2.4/input0 [ 4.673337] input: USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.1/input/input4 [ 4.673405] generic-usb 0003:04D9:2013.0004: input,hidraw3: USB HID v1.00 Device [ USB Keyboard] on usb-0000:00:12.2-2.4/input1 [ 4.673418] usbcore: registered new interface driver usbhid [ 4.673420] usbhid: USB HID core driver [ 5.478992] Btrfs loaded [ 5.480782] md: linear personality registered for level -1 [ 5.482492] md: multipath personality registered for level -4 [ 5.484455] md: raid0 personality registered for level 0 [ 5.487149] async_tx: api initialized (async) [ 5.650033] raid6: int64x1 3105 MB/s [ 5.820033] raid6: int64x2 4346 MB/s [ 5.990027] raid6: int64x4 3162 MB/s [ 6.160033] raid6: int64x8 2869 MB/s [ 6.330033] raid6: sse2x1 4757 MB/s [ 6.500044] raid6: sse2x2 7757 MB/s [ 6.670033] raid6: sse2x4 8827 MB/s [ 6.670038] raid6: using algorithm sse2x4 (8827 MB/s) [ 6.671252] xor: automatically using best checksumming function: generic_sse [ 6.720019] generic_sse: 14758.000 MB/sec [ 6.720020] xor: using function: generic_sse (14758.000 MB/sec) [ 6.723458] md: raid6 personality registered for level 6 [ 6.723459] md: raid5 personality registered for level 5 [ 6.723461] md: raid4 personality registered for level 4 [ 6.728154] md: raid10 personality registered for level 10 [ 12.392950] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 15.715166] EXT4-fs (dm-4): re-mounted. Opts: commit=600,errors=remount-ro [ 15.780116] <30>udev[686]: starting version 167 [ 15.806931] EXT3-fs: barriers not enabled [ 15.861517] kjournald starting. Commit interval 5 seconds [ 15.861849] EXT3-fs (sdb1): using internal journal [ 15.861852] EXT3-fs (sdb1): mounted filesystem with ordered data mode [ 16.580979] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: commit=600 [ 17.187772] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: commit=600 [ 17.306438] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 17.306440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.320761] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 17.323221] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.323245] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 17.323248] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 17.323308] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 17.335503] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 17.335506] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 17.353826] MCE: In-kernel MCE decoding enabled. [ 17.360352] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdafe000 [ 17.360411] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X [ 17.360415] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X [ 17.360420] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X [ 17.360423] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 17.360427] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X [ 17.360430] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 17.360434] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X [ 17.363682] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values [ 17.363764] xHCI xhci_add_endpoint called for root hub [ 17.363765] xHCI xhci_check_bandwidth called for root hub [ 17.363785] hub 8-0:1.0: USB hub found [ 17.363788] hub 8-0:1.0: 4 ports detected [ 17.364012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.577171] EDAC MC: Ver: 2.1.0 Apr 5 2011 [ 17.787989] EDAC amd64_edac: v3.3.0 [ 17.788081] EDAC amd64: DRAM ECC disabled. [ 17.788091] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 17.788092] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 17.788093] (Note that use of the override may cause unknown side effects.) [ 17.806797] lp: driver loaded but no devices found [ 17.880179] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 17.880266] SP5100 TCO timer: failed to get tcobase address [ 17.973348] it87: Found IT8720F chip at 0x228, revision 8 [ 17.973366] it87: Routing internal VCCH to in7 [ 17.973370] it87: Beeping is supported [ 18.089672] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 18.091747] type=1400 audit(1302053573.753:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=983 comm="apparmor_parser" [ 18.091795] type=1400 audit(1302053573.753:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=984 comm="apparmor_parser" [ 18.091996] type=1400 audit(1302053573.753:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser" [ 18.092045] type=1400 audit(1302053573.753:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=984 comm="apparmor_parser" [ 18.092155] type=1400 audit(1302053573.753:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser" [ 18.092208] type=1400 audit(1302053573.753:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=984 comm="apparmor_parser" [ 18.493232] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.719627] hda_codec: ALC892: BIOS auto-probing. [ 18.729246] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 18.729442] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 18.729514] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 18.736660] type=1400 audit(1302053574.393:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1193 comm="apparmor_parser" [ 18.740065] type=1400 audit(1302053574.403:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1194 comm="apparmor_parser" [ 19.574560] type=1400 audit(1302053575.233:10): apparmor="DENIED" operation="open" parent=1349 profile="/sbin/dhclient" name="/var/lib/dhcp3/dhclient.eth0.leases" pid=1350 comm="dhclient3" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 19.574611] type=1400 audit(1302053575.233:11): apparmor="DENIED" operation="open" parent=1349 profile="/sbin/dhclient" name="/var/lib/dhcp3/dhclient.eth0.leases" pid=1350 comm="dhclient3" requested_mask="wc" denied_mask="wc" fsuid=0 ouid=0 [ 20.708370] r8169 0000:03:00.0: eth0: link down [ 20.708396] r8169 0000:03:00.0: eth0: link down [ 20.709121] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.131052] r8169 0000:03:00.0: eth0: link up [ 23.131910] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.481869] ppdev: user-space parallel port driver [ 23.530385] audit_printk_skb: 48 callbacks suppressed [ 23.530387] type=1400 audit(1302053579.193:28): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1699 comm="apparmor_parser" [ 23.530697] type=1400 audit(1302053579.193:29): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1699 comm="apparmor_parser" [ 23.722302] kvm: Nested Virtualization enabled [ 23.722307] kvm: Nested Paging enabled