[   20.048040] =====>rtl8192_set_chan()====ch:7
[   20.156313] =====>rtl8192_set_chan()====ch:8
[   20.186106] =====>rtl8192_set_chan()====ch:1
[   20.300027] =====>rtl8192_set_chan()====ch:2
[   20.412075] =====>rtl8192_set_chan()====ch:3
[   20.524053] =====>rtl8192_set_chan()====ch:4
[   20.636030] =====>rtl8192_set_chan()====ch:5
[   20.748035] =====>rtl8192_set_chan()====ch:6
[   20.860088] =====>rtl8192_set_chan()====ch:7
[   20.972026] =====>rtl8192_set_chan()====ch:8
[   21.084034] =====>rtl8192_set_chan()====ch:9
[   21.196023] =====>rtl8192_set_chan()====ch:10
[   21.308033] =====>rtl8192_set_chan()====ch:11
[   21.420030] =====>rtl8192_set_chan()====ch:12
[   21.532024] =====>rtl8192_set_chan()====ch:13
[   21.653001] =====>rtl8192_set_chan()====ch:1
[   21.764032] =====>rtl8192_set_chan()====ch:2
[   21.876027] =====>rtl8192_set_chan()====ch:3
[   21.988035] =====>rtl8192_set_chan()====ch:4
[   22.100027] =====>rtl8192_set_chan()====ch:5
[   22.212024] =====>rtl8192_set_chan()====ch:6
[   22.324030] =====>rtl8192_set_chan()====ch:7
[   22.436029] =====>rtl8192_set_chan()====ch:8
[   22.480159] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[   22.548024] =====>rtl8192_set_chan()====ch:9
[   22.660024] =====>rtl8192_set_chan()====ch:10
[   22.772025] =====>rtl8192_set_chan()====ch:11
[   22.782066] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   22.884040] =====>rtl8192_set_chan()====ch:12
[   22.996034] =====>rtl8192_set_chan()====ch:13
[   23.108156] ===>rtllib_wx_set_power(): power disable
[   29.842954] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   29.867026] ===>rtllib_wx_set_power(): power disable
[   32.996014] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f0600
[   34.005753] hda-intel: No response from codec, disabling MSI: last cmd=0x002f0600
[   35.008073] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x002f0600
[   35.493383] hda-intel: Invalid position buffer, using LPIB read method instead.
[   35.493404] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   42.129427] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   42.129472] =====>rtl8192_set_chan()====ch:1
[   42.240044] =====>rtl8192_set_chan()====ch:2
[   42.353706] =====>rtl8192_set_chan()====ch:3
[   42.464030] =====>rtl8192_set_chan()====ch:4
[   42.576035] =====>rtl8192_set_chan()====ch:5
[   42.688035] =====>rtl8192_set_chan()====ch:6
[   42.800027] =====>rtl8192_set_chan()====ch:7
[   42.912038] =====>rtl8192_set_chan()====ch:8
[   43.024032] =====>rtl8192_set_chan()====ch:9
[   43.136034] =====>rtl8192_set_chan()====ch:10
[   43.248023] =====>rtl8192_set_chan()====ch:11
[   43.360050] =====>rtl8192_set_chan()====ch:12
[   43.472032] =====>rtl8192_set_chan()====ch:13
[   46.099480] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   46.099530] =====>rtl8192_set_chan()====ch:1
[   46.212041] =====>rtl8192_set_chan()====ch:2
[   46.324029] =====>rtl8192_set_chan()====ch:3
[   46.436040] =====>rtl8192_set_chan()====ch:4
[   46.548041] =====>rtl8192_set_chan()====ch:5
[   46.660037] =====>rtl8192_set_chan()====ch:6
[   46.772035] =====>rtl8192_set_chan()====ch:7
[   46.884088] =====>rtl8192_set_chan()====ch:8
[   46.996040] =====>rtl8192_set_chan()====ch:9
[   47.108294] =====>rtl8192_set_chan()====ch:10
[   47.220038] =====>rtl8192_set_chan()====ch:11
[   47.332035] =====>rtl8192_set_chan()====ch:12
[   47.444032] =====>rtl8192_set_chan()====ch:13
[   47.558692] ===>rtllib_start_scan()
[   47.558711] =====>rtl8192_set_chan()====ch:9
[   47.568889] Linking with WLAN-0024FE4A4D3D,channel:3, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[   47.568902] Linking with WLAN-0024FE4A4D3D,channel:3, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[   47.569186] ===>rtllib_associate_procedure_wq(), chan:3
[   47.569189] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   47.569192] =====>rtl8192_set_chan()====ch:3
[   47.581969] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   47.585695] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a42b
[   47.585701] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a44f
[   47.585705] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e4322
[   47.585708] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f3222
[   47.585712] Associated successfully
[   47.585714] normal associate
[   47.585723] Using G rates:108
[   47.585725] Successfully associated, ht enabled
[   47.585728] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   47.585731] =====>rtl8192_set_chan()====ch:3
[   47.588993] RX: IEEE802.1X EAPOL frame!
[   47.595684] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   47.595690] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[   47.607033] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   48.591774] RX: IEEE802.1X EAPOL frame!
[   48.595315] RX: IEEE802.1X EAPOL frame!
[   48.749918] alg name:CCMP
[   48.865940] padlock: VIA PadLock not detected.
[   48.869952] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[   48.870082] alg name:TKIP
[   49.564164] dm_check_edca_turbo():iot peer is atheros, bssid:00:24:fe:4a:4d:3d
[   50.139334] ===========>set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[   51.644050] ====>to send ADDBAREQ!!!!!
[   51.645872] ====>rx ADDBARSP from :00:24:fe:4a:4d:3d
[   52.136506] DHCP pkt src port:68, dest port:67!!
[   52.220043] ====>to send ADDBAREQ!!!!!
[   52.221859] ====>rx ADDBARSP from :00:24:fe:4a:4d:3d
[   54.542254] ====>rx ADDBAREQ from :00:24:fe:4a:4d:3d
[   54.542265] ====>to send ADDBARSP
[   58.592022] wlan0: no IPv6 routers present
[   58.593655] show_signal_msg: 6 callbacks suppressed
[   58.593663] compiz[1301]: segfault at 4 ip 01be630b sp bf93d760 error 4 in r300_dri.so[1bce000+2fa000]
[   73.005764] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   73.060056] =====>rtl8192_set_chan()====ch:1
[   73.172034] =====>rtl8192_set_chan()====ch:2
[   73.284040] =====>rtl8192_set_chan()====ch:3
[   73.396053] =====>rtl8192_set_chan()====ch:4
[   73.508066] =====>rtl8192_set_chan()====ch:5
[   73.620028] =====>rtl8192_set_chan()====ch:6
[   73.732027] =====>rtl8192_set_chan()====ch:7
[   73.844042] =====>rtl8192_set_chan()====ch:8
[   73.956035] =====>rtl8192_set_chan()====ch:9
[   74.068032] =====>rtl8192_set_chan()====ch:10
[   74.180029] =====>rtl8192_set_chan()====ch:11
[   74.292025] =====>rtl8192_set_chan()====ch:12
[   74.404064] =====>rtl8192_set_chan()====ch:13
[   74.516037] =====>rtl8192_set_chan()====ch:3
[   74.526011] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   74.526017] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[  100.402296] RX: IEEE802.1X EAPOL frame!
[  100.432423] alg name:TKIP
[  100.433062] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  114.003258] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  114.003367] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  114.056089] =====>rtl8192_set_chan()====ch:1
[  114.168053] =====>rtl8192_set_chan()====ch:2
[  114.280045] =====>rtl8192_set_chan()====ch:3
[  114.392054] =====>rtl8192_set_chan()====ch:4
[  114.504036] =====>rtl8192_set_chan()====ch:5
[  114.616047] =====>rtl8192_set_chan()====ch:6
[  114.728037] =====>rtl8192_set_chan()====ch:7
[  114.841989] =====>rtl8192_set_chan()====ch:8
[  114.952063] =====>rtl8192_set_chan()====ch:9
[  115.064054] =====>rtl8192_set_chan()====ch:10
[  115.176041] =====>rtl8192_set_chan()====ch:11
[  115.288040] =====>rtl8192_set_chan()====ch:12
[  115.400034] =====>rtl8192_set_chan()====ch:13
[  115.512042] =====>rtl8192_set_chan()====ch:3
[  115.522036] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  115.522050] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[  119.067709] disauth packet !
[  119.068147] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  129.519819] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  129.519865] =====>rtl8192_set_chan()====ch:1
[  129.632045] =====>rtl8192_set_chan()====ch:2
[  129.744054] =====>rtl8192_set_chan()====ch:3
[  129.856053] =====>rtl8192_set_chan()====ch:4
[  129.968032] =====>rtl8192_set_chan()====ch:5
[  130.080050] =====>rtl8192_set_chan()====ch:6
[  130.192033] =====>rtl8192_set_chan()====ch:7
[  130.304053] =====>rtl8192_set_chan()====ch:8
[  130.416033] =====>rtl8192_set_chan()====ch:9
[  130.528041] =====>rtl8192_set_chan()====ch:10
[  130.640066] =====>rtl8192_set_chan()====ch:11
[  130.752036] =====>rtl8192_set_chan()====ch:12
[  130.864051] =====>rtl8192_set_chan()====ch:13
[  130.978728] ===>rtllib_start_scan()
[  130.978746] =====>rtl8192_set_chan()====ch:4
[  130.989295] Linking with WLAN-0024FE4A4D3D,channel:3, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  130.989310] Linking with WLAN-0024FE4A4D3D,channel:3, qos:1, myHT:1, networkHT:1, mode:10 cur_net.flags:0x40e
[  130.989530] ===>rtllib_associate_procedure_wq(), chan:3
[  130.989534] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  130.989537] =====>rtl8192_set_chan()====ch:3
[  131.006355] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  131.010062] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a42b
[  131.010067] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a44f
[  131.010070] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e4322
[  131.010073] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f3222
[  131.010076] Associated successfully
[  131.010078] normal associate
[  131.010088] Using G rates:108
[  131.010090] Successfully associated, ht enabled
[  131.010093] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  131.010096] =====>rtl8192_set_chan()====ch:3
[  131.012305] RX: IEEE802.1X EAPOL frame!
[  131.020058] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  131.020064] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[  131.037948] RX: IEEE802.1X EAPOL frame!
[  131.038128] alg name:CCMP
[  131.038740] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[  131.039377] alg name:TKIP
[  131.039988] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[  131.084085] DHCP pkt src port:68, dest port:67!!
[  132.302128] ====>rx ADDBAREQ from :00:24:fe:4a:4d:3d
[  132.302139] ====>to send ADDBARSP
[  134.531776] rtllib: TsStartAddBaProcess()==>BA timer is already added
[  134.568043] ====>to send ADDBAREQ!!!!!
[  134.569846] ====>rx ADDBARSP from :00:24:fe:4a:4d:3d
[  175.004692] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  175.004806] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  175.060076] =====>rtl8192_set_chan()====ch:1
[  175.172069] =====>rtl8192_set_chan()====ch:2
[  175.284040] =====>rtl8192_set_chan()====ch:3
[  175.396057] =====>rtl8192_set_chan()====ch:4
[  175.508048] =====>rtl8192_set_chan()====ch:5
[  175.620048] =====>rtl8192_set_chan()====ch:6
[  175.732052] =====>rtl8192_set_chan()====ch:7
[  175.844036] =====>rtl8192_set_chan()====ch:8
[  175.956076] =====>rtl8192_set_chan()====ch:9
[  176.068058] =====>rtl8192_set_chan()====ch:10
[  176.180054] =====>rtl8192_set_chan()====ch:11
[  176.292057] =====>rtl8192_set_chan()====ch:12
[  176.404062] =====>rtl8192_set_chan()====ch:13
[  176.516074] =====>rtl8192_set_chan()====ch:3
[  176.526071] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  176.526084] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE