[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-53-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #89-Ubuntu SMP Wed May 20 10:34:39 UTC 2015 (Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic.efi.signed root=UUID=27278fc3-e93d-4645-a39a-08d31e3b9369 ro locale=ru_RU drm.debug=0xe plymouth:debug quiet splash radeon.modeset=0 nouveau.modeset=0 i915.disable_power_well=0 video.use_native_backlight=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007a7e9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a7ea000-0x000000007a86bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a86c000-0x000000007a87dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007a87e000-0x000000007b5acfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007b5ad000-0x000000007b9e1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b9e2000-0x000000007ba3cfff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007ba3d000-0x000000007bc08fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bc09000-0x000000007bfc4fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x7a86f000 ACPI 2.0=0x7a86f000 SMBIOS=0xf05b0 MPS=0xfd950 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB) [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x000000000003f000) (0MB) [ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB) [ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001504000) (20MB) [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001504000-0x0000000002000000) (10MB) [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003404000) (20MB) [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000003404000-0x0000000022faf000) (507MB) [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000022faf000-0x0000000040000000) (464MB) [ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000040200000-0x000000005c000000) (446MB) [ 0.000000] efi: mem12: type=4, attr=0xf, range=[0x000000005c000000-0x000000005c020000) (0MB) [ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x000000005c020000-0x0000000074208000) (385MB) [ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000074208000-0x00000000743de000) (1MB) [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x00000000743de000-0x0000000074512000) (1MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000074512000-0x000000007a1ea000) (92MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000007a1ea000-0x000000007a445000) (2MB) [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x000000007a445000-0x000000007a44f000) (0MB) [ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x000000007a44f000-0x000000007a7ea000) (3MB) [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x000000007a7ea000-0x000000007a86c000) (0MB) [ 0.000000] efi: mem21: type=9, attr=0xf, range=[0x000000007a86c000-0x000000007a87e000) (0MB) [ 0.000000] efi: mem22: type=10, attr=0xf, range=[0x000000007a87e000-0x000000007b5ad000) (13MB) [ 0.000000] efi: mem23: type=6, attr=0x800000000000000f, range=[0x000000007b5ad000-0x000000007b9e2000) (4MB) [ 0.000000] efi: mem24: type=5, attr=0x800000000000000f, range=[0x000000007b9e2000-0x000000007ba3d000) (0MB) [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000007ba3d000-0x000000007bc09000) (1MB) [ 0.000000] efi: mem26: type=6, attr=0x800000000000000f, range=[0x000000007bc09000-0x000000007bfc5000) (3MB) [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000007bfc5000-0x000000007c000000) (0MB) [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000100000000-0x0000000180000000) (2048MB) [ 0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem30: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem31: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB) [ 0.000000] efi: mem32: type=11, attr=0x8000000000000001, range=[0x00000000ff980000-0x0000000100000000) (6MB) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. Inspiron 15-3552/079W3P, BIOS 4.0.13 12/22/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C800000 mask FFF800000 uncachable [ 0.000000] 2 base 07D000000 mask FFF000000 uncachable [ 0.000000] 3 base 07E000000 mask FFE000000 uncachable [ 0.000000] 4 base 100000000 mask F80000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1992MB, range: 8MB, type UC [ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC [ 0.000000] reg 3, base: 2016MB, range: 32MB, type UC [ 0.000000] reg 4, base: 4GB, range: 2GB, type WB [ 0.000000] total RAM covered: 4040M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1992MB, range: 8MB, type UC [ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC [ 0.000000] reg 3, base: 2016MB, range: 32MB, type UC [ 0.000000] reg 4, base: 4GB, range: 2GB, type WB [ 0.000000] e820: update [mem 0x7c800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE [ 0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE [ 0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 2M [ 0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] [ 0.000000] [mem 0x100000000-0x17bffffff] page 2M [ 0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0x7a7e9fff] [ 0.000000] [mem 0x40200000-0x7a5fffff] page 2M [ 0.000000] [mem 0x7a600000-0x7a7e9fff] page 4k [ 0.000000] BRK [0x02fe7000, 0x02fe7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7ba3d000-0x7bc08fff] [ 0.000000] [mem 0x7ba3d000-0x7bc08fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7bfc5000-0x7bffffff] [ 0.000000] [mem 0x7bfc5000-0x7bffffff] page 4k [ 0.000000] RAMDISK: [mem 0x3451e000-0x36286fff] [ 0.000000] ACPI: RSDP 000000007a86f000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000000007a86f0a0 0000C4 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000007a879618 00010C (v05 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 000000007a86f1f8 00A41B (v02 DELL WN09 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 000000007b5aae80 000040 [ 0.000000] ACPI: APIC 000000007a879728 000068 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 000000007a879790 000044 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 000000007a8797d8 00009C (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 000000007a879878 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: BOOT 000000007a8798b8 000028 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 000000007a8798e0 000176 (v01 ALWARE ALIENWRE 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 000000007a879a58 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 000000007a879bd0 000038 (v01 DELL WN09 01072009 AMI. 00000006) [ 0.000000] ACPI: SSDT 000000007a879c08 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000007a87a370 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000007a87a600 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 000000007a87a780 000042 (v01 DELL WN09 00000000 00000000) [ 0.000000] ACPI: SSDT 000000007a87a7c8 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109) [ 0.000000] ACPI: TPM2 000000007a87abf0 000034 (v03 00000000 00000000) [ 0.000000] ACPI: LPIT 000000007a87ac28 000104 (v01 DELL WN09 00000005 MSFT 0100000D) [ 0.000000] ACPI: BGRT 000000007a87ad30 000038 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: CSRT 000000007a87ad68 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) [ 0.000000] ACPI: SSDT 000000007a87aeb8 000545 (v01 CpuDpf CpuDptf 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000007a87b400 001ED7 (v01 DptfTb DptfTab 00001000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17fffffff] [ 0.000000] NODE_DATA [mem 0x17fff7000-0x17fffbfff] [ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x17fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0003efff] [ 0.000000] node 0: [mem 0x00040000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0x7a7e9fff] [ 0.000000] node 0: [mem 0x7ba3d000-0x7bc08fff] [ 0.000000] node 0: [mem 0x7bfc5000-0x7bffffff] [ 0.000000] node 0: [mem 0x100000000-0x17fffffff] [ 0.000000] On node 0 totalpages: 1025935 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7776 pages used for memmap [ 0.000000] DMA32 zone: 497649 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 131 [ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a7ea000-0x7a86bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a86c000-0x7a87dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a87e000-0x7b5acfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b5ad000-0x7b9e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b9e2000-0x7ba3cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bc09000-0x7bfc4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff] [ 0.000000] e820: [mem 0x7c000000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88017fc00000 s81536 r8192 d20864 u1048576 [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009877 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic.efi.signed root=UUID=27278fc3-e93d-4645-a39a-08d31e3b9369 ro locale=ru_RU drm.debug=0xe plymouth:debug quiet splash radeon.modeset=0 nouveau.modeset=0 i915.disable_power_well=0 video.use_native_backlight=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3824172K/4103740K available (7391K kernel code, 1146K rwdata, 3408K rodata, 1336K init, 1448K bss, 279568K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.008000] tsc: PIT calibration matches HPET. 1 loops [ 0.008000] tsc: Detected 1599.714 MHz processor [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.42 BogoMIPS (lpj=6398856) [ 0.000011] pid_max: default: 32768 minimum: 301 [ 0.003191] Security Framework initialized [ 0.003223] AppArmor: AppArmor initialized [ 0.003227] Yama: becoming mindful. [ 0.003954] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006288] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.007338] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.007363] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.007889] Initializing cgroup subsys memory [ 0.007907] Initializing cgroup subsys devices [ 0.007914] Initializing cgroup subsys freezer [ 0.007920] Initializing cgroup subsys blkio [ 0.007924] Initializing cgroup subsys perf_event [ 0.007932] Initializing cgroup subsys hugetlb [ 0.007969] CPU: Physical Processor ID: 0 [ 0.007974] CPU: Processor Core ID: 0 [ 0.007982] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.007982] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.013417] mce: CPU supports 6 MCE banks [ 0.013434] CPU0: Thermal monitoring handled by SMI [ 0.013448] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.013448] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 0 [ 0.013448] tlb_flushall_shift: 6 [ 0.013632] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.015420] ACPI: Core revision 20131115 [ 0.034473] ACPI: All ACPI Tables successfully acquired [ 0.042665] ftrace: allocating 28577 entries in 112 pages [ 0.064645] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.104333] smpboot: CPU0: Intel(R) Celeron(R) CPU N3060 @ 1.60GHz (fam: 06, model: 4c, stepping: 04) [ 0.104354] TSC deadline timer enabled [ 0.104381] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.104396] ... version: 3 [ 0.104399] ... bit width: 40 [ 0.104402] ... generic registers: 2 [ 0.104405] ... value mask: 000000ffffffffff [ 0.104407] ... max period: 000000ffffffffff [ 0.104409] ... fixed-purpose events: 3 [ 0.104412] ... event mask: 0000000700000003 [ 0.108413] x86: Booting SMP configuration: [ 0.124794] CPU1: Thermal monitoring handled by SMI [ 0.108421] .... node #0, CPUs: #1 [ 0.126901] x86: Booted up 1 node, 2 CPUs [ 0.126908] smpboot: Total of 2 processors activated (6398.85 BogoMIPS) [ 0.127087] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.128034] devtmpfs: initialized [ 0.136967] EVM: security.selinux [ 0.136974] EVM: security.SMACK64 [ 0.136976] EVM: security.ima [ 0.136981] EVM: security.capability [ 0.137173] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) [ 0.137180] PM: Registering ACPI NVS region [mem 0x7a87e000-0x7b5acfff] (13824000 bytes) [ 0.139885] pinctrl core: initialized pinctrl subsystem [ 0.140059] regulator-dummy: no parameters [ 0.140131] RTC time: 14:14:46, date: 05/26/20 [ 0.140220] NET: Registered protocol family 16 [ 0.140635] cpuidle: using governor ladder [ 0.140642] cpuidle: using governor menu [ 0.140837] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.140843] ACPI: bus type PCI registered [ 0.140848] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.141000] PCI: not using MMCONFIG [ 0.141005] PCI: Using configuration type 1 for base access [ 0.141023] dmi type 0xB1 record - unknown flag [ 0.143314] bio: create slab at 0 [ 0.143730] ACPI: Added _OSI(Module Device) [ 0.143735] ACPI: Added _OSI(Processor Device) [ 0.143738] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.143741] ACPI: Added _OSI(Processor Aggregator Device) [ 0.162204] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.169997] ACPI: SSDT 000000007a81a698 0005F2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.171033] ACPI: Dynamic OEM Table Load: [ 0.171039] ACPI: SSDT (null) 0005F2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.171305] ACPI: SSDT 000000007a819c18 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.172311] ACPI: Dynamic OEM Table Load: [ 0.172317] ACPI: SSDT (null) 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.177271] ACPI: SSDT 000000007a81be18 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.178319] ACPI: Dynamic OEM Table Load: [ 0.178325] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.180922] ACPI: SSDT 000000007a81cf18 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.181932] ACPI: Dynamic OEM Table Load: [ 0.181938] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.185429] ACPI: Interpreter enabled [ 0.185449] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.185466] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.185508] ACPI: (supports S0 S3 S4 S5) [ 0.185514] ACPI: Using IOAPIC for interrupt routing [ 0.185574] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.187556] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.223430] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.223878] ACPI: No dock devices found. [ 0.227919] ACPI: Power Resource [USBC] (on) [ 0.246477] ACPI: Power Resource [FN00] (off) [ 0.247993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.248008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.248107] \_SB_.PCI0:_OSC invalid UUID [ 0.248114] _OSC request data:1 1f 0 [ 0.248125] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.249227] PCI host bridge to bus 0000:00 [ 0.249237] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.249247] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.249251] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.249256] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.249260] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.249265] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.249269] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.249274] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.249292] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.249540] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.249579] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.249596] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.249609] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.249879] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000 [ 0.249907] pci 0000:00:0b.0: reg 0x10: [mem 0x9131f000-0x9131ffff 64bit] [ 0.250208] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.250278] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f] [ 0.250293] pci 0000:00:13.0: reg 0x24: [mem 0x9131c000-0x9131c7ff] [ 0.250362] pci 0000:00:13.0: PME# supported from D3hot [ 0.250569] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.250609] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit] [ 0.250712] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.250855] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.250939] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.250968] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff] [ 0.250983] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff] [ 0.251083] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.251306] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300 [ 0.251345] pci 0000:00:1b.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit] [ 0.251459] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.251609] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.251695] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.251814] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.251966] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.252052] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.252384] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.252445] pci 0000:00:1f.3: reg 0x10: [mem 0x91318000-0x9131801f] [ 0.252566] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.253058] pci 0000:01:00.0: [168c:0036] type 00 class 0x028000 [ 0.253091] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x9127ffff 64bit] [ 0.253146] pci 0000:01:00.0: reg 0x30: [mem 0x91280000-0x9128ffff pref] [ 0.253224] pci 0000:01:00.0: supports D1 D2 [ 0.253228] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.253288] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.259172] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.259189] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff] [ 0.260770] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.260925] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.261087] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.261235] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.261388] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.261541] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.261696] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.261847] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.263274] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.263296] ACPI: \_SB_.PCI0: notify handler is installed [ 0.263484] Found 1 acpi root devices [ 0.263935] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.263941] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.263947] vgaarb: loaded [ 0.263952] vgaarb: bridge control possible 0000:00:02.0 [ 0.264362] SCSI subsystem initialized [ 0.264459] libata version 3.00 loaded. [ 0.264506] ACPI: bus type USB registered [ 0.264558] usbcore: registered new interface driver usbfs [ 0.264583] usbcore: registered new interface driver hub [ 0.264655] usbcore: registered new device driver usb [ 0.264929] PCI: Using ACPI for IRQ routing [ 0.276059] PCI: pci_cache_line_size set to 64 bytes [ 0.276136] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.276143] e820: reserve RAM buffer [mem 0x7a7ea000-0x7bffffff] [ 0.276147] e820: reserve RAM buffer [mem 0x7bc09000-0x7bffffff] [ 0.276365] NetLabel: Initializing [ 0.276371] NetLabel: domain hash size = 128 [ 0.276374] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.276400] NetLabel: unlabeled traffic allowed by default [ 0.276615] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.276626] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.278705] Switched to clocksource hpet [ 0.290177] AppArmor: AppArmor Filesystem Enabled [ 0.290250] pnp: PnP ACPI init [ 0.290287] ACPI: bus type PNP registered [ 0.290394] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.290539] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.290989] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.291126] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.291133] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.291138] system 00:03: [io 0x0500-0x05fe] has been reserved [ 0.291145] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.291270] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.291398] pnp 00:05: Plug and Play ACPI device, IDs SYN060c PNP0f13 (active) [ 0.291506] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.291516] system 00:06: [mem 0xfe900000-0xfe902fff] has been reserved [ 0.291522] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.291855] pnp 00:07: unknown resource type 19 in _CRS [ 0.291861] pnp 00:07: can't evaluate _CRS: 1 [ 0.291917] pnp 00:07: Plug and Play ACPI device, IDs DLL06ac PNP0c50 (active) [ 0.292973] system 00:08: [mem 0x9131d000-0x9131dfff] has been reserved [ 0.292980] system 00:08: [mem 0x9131b000-0x9131bfff] has been reserved [ 0.292985] system 00:08: [mem 0x91319000-0x91319fff] has been reserved [ 0.292993] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293105] system 00:09: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.293111] system 00:09: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.293117] system 00:09: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.293122] system 00:09: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.293127] system 00:09: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.293132] system 00:09: [mem 0xfed08000-0xfed09fff] could not be reserved [ 0.293137] system 00:09: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.293142] system 00:09: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.293147] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.293153] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293800] pnp 00:0a: Plug and Play ACPI device, IDs INT33ff (active) [ 0.294157] pnp: PnP ACPI: found 11 devices [ 0.294161] ACPI: bus type PNP unregistered [ 0.305056] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.305073] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff] [ 0.305092] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.305097] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.305103] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.305107] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.305112] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.305116] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.305121] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff] [ 0.305127] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff] [ 0.305206] NET: Registered protocol family 2 [ 0.305708] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.305895] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.306098] TCP: Hash tables configured (established 32768 bind 32768) [ 0.306172] TCP: reno registered [ 0.306195] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.306248] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.306432] NET: Registered protocol family 1 [ 0.306479] pci 0000:00:02.0: Video device with shadowed ROM [ 0.307007] PCI: CLS 0 bytes, default 64 [ 0.307178] Trying to unpack rootfs image as initramfs... [ 1.302775] Freeing initrd memory: 30116K (ffff88003451e000 - ffff880036287000) [ 1.302789] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.302797] software IO TLB [mem 0x70512000-0x74512000] (64MB) mapped at [ffff880070512000-ffff880074511fff] [ 1.302967] Simple Boot Flag at 0x47 set to 0x1 [ 1.303222] microcode: CPU0 sig=0x406c4, pf=0x1, revision=0x408 [ 1.303244] microcode: CPU1 sig=0x406c4, pf=0x1, revision=0x408 [ 1.303356] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.303361] Scanning for low memory corruption every 60 seconds [ 1.303944] Initialise system trusted keyring [ 1.304072] audit: initializing netlink socket (disabled) [ 1.304098] type=2000 audit(1590502487.296:1): initialized [ 1.357541] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.360418] zbud: loaded [ 1.360727] VFS: Disk quotas dquot_6.5.2 [ 1.360831] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.361906] fuse init (API version 7.22) [ 1.362079] msgmni has been set to 7725 [ 1.362205] Key type big_key registered [ 1.363074] Key type asymmetric registered [ 1.363080] Asymmetric key parser 'x509' registered [ 1.363159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.363237] io scheduler noop registered [ 1.363242] io scheduler deadline registered (default) [ 1.363299] io scheduler cfq registered [ 1.363802] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.363837] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.363937] intel_idle: does not run on family 6 model 76 [ 1.363953] ipmi message handler version 39.2 [ 1.364069] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.364199] ACPI: AC Adapter [AC] (on-line) [ 1.364334] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.366430] ACPI: Lid Switch [LID0] [ 1.366536] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.366546] ACPI: Power Button [PWRB] [ 1.366622] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.366629] ACPI: Sleep Button [SLPB] [ 1.366756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.366762] ACPI: Power Button [PWRF] [ 1.366940] ACPI: Fan [FAN0] (off) [ 1.370300] Monitor-Mwait will be used to enter C-1 state [ 1.415563] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.415570] ACPI: Thermal Zone [THM] (44 C) [ 1.416378] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.416383] ACPI: Thermal Zone [TZ01] (44 C) [ 1.416443] GHES: HEST is not enabled! [ 1.416634] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.437141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.439579] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.439592] ACPI: Battery Slot [BAT0] (battery present) [ 1.439867] Linux agpgart interface v0.103 [ 1.442914] brd: module loaded [ 1.444523] loop: module loaded [ 1.445360] libphy: Fixed MDIO Bus: probed [ 1.445557] tun: Universal TUN/TAP device driver, 1.6 [ 1.445562] tun: (C) 1999-2004 Max Krasnyansky [ 1.445665] PPP generic driver version 2.4.2 [ 1.445767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.445779] ehci-pci: EHCI PCI platform driver [ 1.445805] ehci-platform: EHCI generic platform driver [ 1.445819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.445823] ohci-pci: OHCI PCI platform driver [ 1.445842] ohci-platform: OHCI generic platform driver [ 1.445860] uhci_hcd: USB Universal Host Controller Interface driver [ 1.446183] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.446199] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.446429] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.446492] xhci_hcd 0000:00:14.0: irq 131 for MSI/MSI-X [ 1.446697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.446703] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.446707] usb usb1: Product: xHCI Host Controller [ 1.446711] usb usb1: Manufacturer: Linux 3.13.0-53-generic xhci_hcd [ 1.446715] usb usb1: SerialNumber: 0000:00:14.0 [ 1.447001] hub 1-0:1.0: USB hub found [ 1.447032] hub 1-0:1.0: 7 ports detected [ 1.449382] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.449392] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.449483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.449488] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.449492] usb usb2: Product: xHCI Host Controller [ 1.449496] usb usb2: Manufacturer: Linux 3.13.0-53-generic xhci_hcd [ 1.449500] usb usb2: SerialNumber: 0000:00:14.0 [ 1.449699] hub 2-0:1.0: USB hub found [ 1.449727] hub 2-0:1.0: 6 ports detected [ 1.458864] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.463121] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.463135] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.463420] mousedev: PS/2 mouse device common for all mice [ 1.463801] rtc_cmos 00:00: RTC can wake from S4 [ 1.464045] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.464110] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.464282] device-mapper: uevent: version 1.0.3 [ 1.464476] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.464491] ledtrig-cpu: registered to indicate activity on CPUs [ 1.464497] EFI Variables Facility v0.08 2004-May-17 [ 1.472365] TCP: cubic registered [ 1.472610] NET: Registered protocol family 10 [ 1.473014] NET: Registered protocol family 17 [ 1.473071] Key type dns_resolver registered [ 1.473615] Loading compiled-in X.509 certificates [ 1.476074] Loaded X.509 cert 'Magrathea: Glacier signing key: 9aac900abd0220fb93c8be10f20d6973dab829f5' [ 1.476125] registered taskstats version 1 [ 1.481828] Key type trusted registered [ 1.487605] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.493146] Key type encrypted registered [ 1.493159] AppArmor: AppArmor sha1 policy hashing enabled [ 1.493164] IMA: No TPM chip found, activating TPM-bypass! [ 1.493612] regulator-dummy: disabling [ 1.493727] Magic number: 4:600:233 [ 1.493934] rtc_cmos 00:00: setting system clock to 2020-05-26 14:14:48 UTC (1590502488) [ 1.495685] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.495689] EDD information not available. [ 1.495776] PM: Hibernation image not present or could not be loaded. [ 1.497649] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.497656] Write protecting the kernel read-only data: 12288k [ 1.501331] Freeing unused kernel memory: 788K (ffff88000273b000 - ffff880002800000) [ 1.504332] Freeing unused kernel memory: 688K (ffff880002b54000 - ffff880002c00000) [ 1.527481] systemd-udevd[102]: starting version 204 [ 1.560815] drm: module verification failed: signature and/or required key missing - tainting kernel [ 1.561052] ahci 0000:00:13.0: version 3.0 [ 1.561279] ahci 0000:00:13.0: irq 132 for MSI/MSI-X [ 1.561348] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.561353] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm apst [ 1.561819] scsi0 : ahci [ 1.561932] scsi1 : ahci [ 1.561992] ata1: SATA max UDMA/133 abar m2048@0x9131c000 port 0x9131c100 irq 132 [ 1.561997] ata2: SATA max UDMA/133 abar m2048@0x9131c000 port 0x9131c180 irq 132 [ 1.562528] [drm] Initialized drm 1.1.0 20060810 [ 1.579687] sdhci: Secure Digital Host Controller Interface driver [ 1.579693] sdhci: Copyright(c) Pierre Ossman [ 1.585918] sdhci-acpi 80860F14:00: dummy supplies not allowed [ 1.585924] mmc0: no vqmmc regulator found [ 1.585928] sdhci-acpi 80860F14:00: dummy supplies not allowed [ 1.585929] mmc0: no vmmc regulator found [ 1.586354] wmi: Mapper loaded [ 1.600267] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 1.627191] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x22b1 rev=0x35 flags=need_gfx_hws,is_valleyview,is_preliminary,has_hotplug, [ 1.627456] [drm:intel_detect_pch] No PCH found. [ 1.628349] [drm] Memory usable by graphics device = 2048M [ 1.628352] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.628355] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.628357] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.680519] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7aea3000 [ 1.680543] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.680546] [drm:intel_opregion_setup] ASLE supported [ 1.680614] i915 0000:00:02.0: irq 133 for MSI/MSI-X [ 1.680630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.680632] [drm] Driver supports precise vblank timestamp query. [ 1.680635] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.680639] [drm:validate_vbt] Using VBT from OpRegion: $VBT CHERRYVIEW d [ 1.680644] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.680646] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.680649] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.680652] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.680656] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.680659] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 1.680662] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 260 Hz, active high, min brightness 15, level 255 [ 1.680665] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.680668] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.680681] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.680693] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at 7ce00000 [ 1.712610] [drm:intel_display_power_get] enabling always-on [ 1.712617] [drm:intel_display_power_get] enabling pipe-a [ 1.718688] [drm:intel_display_power_get] enabling dpio-common-bc [ 1.726690] [drm:intel_display_power_get] enabling dpio-common-d [ 1.830767] [drm:intel_modeset_init] 3 display pipes available. [ 1.830793] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.831208] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.831263] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.831397] [drm:intel_dp_init_connector] Adding eDP connector on port C [ 1.831456] [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe B [ 1.831463] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 250 t9 2000 t10 500 t11_t12 7000 [ 1.831466] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 250 t9 2000 t10 500 t11_t12 6000 [ 1.831469] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 700 [ 1.831471] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 25, off delay 200 [ 1.831477] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f07 [ 1.831480] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1 [ 1.831541] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 1.831551] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.832043] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 41 00 00 01 40 02 02 06 00 00 0b 00 [ 1.832406] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f07 [ 1.834693] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.852196] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.852201] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.852203] usb 1-2: Product: USB2.0 Hub [ 1.852749] hub 1-2:1.0: USB hub found [ 1.853050] hub 1-2:1.0: 4 ports detected [ 1.859100] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.859107] [drm:intel_dp_drrs_init] seamless DRRS supported for eDP panel. [ 1.859111] [drm:intel_edp_init_connector] using pipe B for initial backlight setup [ 1.859121] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 6009/6009 [ 1.859211] [drm:intel_dp_init_connector] Adding DP connector on port D [ 1.859252] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2 [ 1.859328] [drm:intel_dsi_init] [ 1.859339] [drm:intel_modeset_readout_hw_state] [CRTC:9] hw state readout: disabled [ 1.880577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.890676] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: enabled [ 1.890683] [drm:intel_modeset_readout_hw_state] [CRTC:19] hw state readout: disabled [ 1.890690] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 1.890693] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 1.890700] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A [ 1.890709] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe B [ 1.890714] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 1.890718] [drm:intel_modeset_readout_hw_state] [ENCODER:41:TMDS-41] hw state readout: disabled, pipe A [ 1.890722] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:eDP-1] hw state readout: enabled [ 1.890726] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:HDMI-A-1] hw state readout: disabled [ 1.890730] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled [ 1.890734] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:HDMI-A-2] hw state readout: disabled [ 1.890738] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-3] hw state readout: disabled [ 1.890742] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:DP-2] hw state readout: disabled [ 1.890748] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 1.890755] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 1.890757] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 1.890761] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 1.890764] [drm:intel_dump_pipe_config] [CRTC:9][setup_hw_state] config for pipe A [ 1.890766] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.890768] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.890771] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.890774] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.890776] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.890778] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.890780] [drm:intel_dump_pipe_config] requested mode: [ 1.890784] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.890786] [drm:intel_dump_pipe_config] adjusted mode: [ 1.890789] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.890792] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.890794] [drm:intel_dump_pipe_config] port clock: 0 [ 1.890796] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.890799] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.890801] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.890803] [drm:intel_dump_pipe_config] ips: 0 [ 1.890805] [drm:intel_dump_pipe_config] double wide: 0 [ 1.890810] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe B [ 1.890811] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.890813] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 1.890816] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.890819] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 5333756, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64 [ 1.890821] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.890823] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.890825] [drm:intel_dump_pipe_config] requested mode: [ 1.890829] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1366 0 0 0 768 0 0 0 0x0 0x0 [ 1.890830] [drm:intel_dump_pipe_config] adjusted mode: [ 1.890834] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9 [ 1.890837] [drm:intel_dump_crtc_timings] crtc timings: 76299 1366 1374 1384 1558 768 771 772 816, type: 0x0 flags: 0x9 [ 1.890839] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.890841] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 1.890843] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.890845] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.890847] [drm:intel_dump_pipe_config] ips: 0 [ 1.890849] [drm:intel_dump_pipe_config] double wide: 0 [ 1.890853] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.890857] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.890859] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.890862] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.890865] [drm:intel_dump_pipe_config] [CRTC:19][setup_hw_state] config for pipe C [ 1.890866] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.890868] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.890871] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.890873] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.890876] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.890878] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.890880] [drm:intel_dump_pipe_config] requested mode: [ 1.890883] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.890885] [drm:intel_dump_pipe_config] adjusted mode: [ 1.890888] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.890891] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.890893] [drm:intel_dump_pipe_config] port clock: 0 [ 1.890894] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.890897] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.890899] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.890901] [drm:intel_dump_pipe_config] ips: 0 [ 1.890903] [drm:intel_dump_pipe_config] double wide: 0 [ 1.890907] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1] [ 1.890914] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 1.890917] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 1.890921] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 1.890924] [drm:check_encoder_state] [ENCODER:31:TMDS-31] [ 1.890927] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 1.890930] [drm:check_encoder_state] [ENCODER:41:TMDS-41] [ 1.890934] [drm:check_crtc_state] [CRTC:9] [ 1.890937] [drm:check_crtc_state] [CRTC:14] [ 1.922676] [drm:check_crtc_state] [CRTC:19] [ 1.922693] [drm:i9xx_get_plane_config] pipe/plane 1/1 with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [ 1.922696] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=408000 [ 1.922707] [drm:i915_pages_create_for_stolen] offset=0x0, size=4227072 [ 1.922717] [drm:intel_alloc_plane_obj] plane fb obj ffff880035fc8000 [ 1.922723] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 408000 [ 1.922726] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [408000, 7ffff000] [ 1.925984] [drm:gen8_ppgtt_init] Allocated 2 pages for page directories (0 wasted) [ 1.925986] [drm:gen8_ppgtt_init] Allocated 1024 pages for page tables (0 wasted) [ 1.926055] [drm:i915_gem_context_init] HW context support initialized [ 1.926073] [drm:init_status_page] render ring hws offset: 0x0041b000 [ 1.926076] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.926080] [drm:i915_pages_create_for_stolen] offset=0x408000, size=131072 [ 1.926149] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0043e000 [ 1.926167] [drm:init_status_page] bsd ring hws offset: 0x0043f000 [ 1.926170] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.926173] [drm:i915_pages_create_for_stolen] offset=0x428000, size=131072 [ 1.926225] [drm:init_status_page] blitter ring hws offset: 0x00462000 [ 1.926228] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.926231] [drm:i915_pages_create_for_stolen] offset=0x448000, size=131072 [ 1.926284] [drm:init_status_page] video enhancement ring hws offset: 0x00485000 [ 1.926287] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.926290] [drm:i915_pages_create_for_stolen] offset=0x468000, size=131072 [ 1.926362] [drm:intel_ring_workarounds_emit] Number of Workarounds emitted: 2 [ 1.926390] [drm:cherryview_setup_pctx] PCBR: 0x7edf8001 [ 1.930664] [drm:cherryview_init_gt_powersave] DDR speed: 1600 MHz [ 1.931753] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P2D, max UDMA/100 [ 1.931757] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.933492] ata1.00: configured for UDMA/100 [ 1.933718] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 AM0P PQ: 0 ANSI: 5 [ 1.933966] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.934136] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.934140] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.934247] sd 0:0:0:0: [sda] Write Protect is off [ 1.934252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.934297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.938683] [drm:cherryview_init_gt_powersave] max GPU freq: 0 MHz (0) [ 1.946671] [drm:cherryview_init_gt_powersave] RPe GPU freq: 320 MHz (32) [ 1.954667] [drm:cherryview_init_gt_powersave] RP1(Guar) GPU freq: 0 MHz (0) [ 1.962679] [drm:cherryview_init_gt_powersave] min GPU freq: 0 MHz (0) [ 1.978663] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz [ 1.978816] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.979261] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] [ 1.979265] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1] [ 1.979299] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.979306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes : [ 1.979311] [drm:drm_mode_debug_printmodeline] Modeline 33:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 1.979315] [drm:drm_mode_debug_printmodeline] Modeline 34:"1366x768" 40 50870 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 1.979317] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] [ 1.979320] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1] [ 1.979492] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.979495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.979498] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected [ 1.979501] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 1.979503] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 1.979508] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 1.979510] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] [ 1.979512] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2] [ 1.983899] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.984626] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 1.985446] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 2.034663] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 2.050672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.050679] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected [ 2.050683] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-3] [ 2.050686] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-3] [ 2.050847] sda: sda1 sda2 sda3 sda4 [ 2.051357] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.106661] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 2.122670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 2.122675] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-3] disconnected [ 2.122678] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-2] [ 2.122681] [drm:intel_dp_detect] [CONNECTOR:42:DP-2] [ 2.123189] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.123193] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 0 [ 2.123705] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.123709] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 1 [ 2.124218] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.124221] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 2 [ 2.124728] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.124732] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 3 [ 2.125235] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.125238] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 4 [ 2.125260] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 2.125760] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.125764] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 5 [ 2.126269] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.126273] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 2 - cnt: 6 [ 2.126782] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.126785] [drm:intel_hpd_irq_handler] HPD interrupt storm detected on PIN 2 [ 2.126923] usb 1-2.1: new full-speed USB device number 3 using xhci_hcd [ 2.127298] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.127803] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.127824] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 2.135164] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.135671] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.136177] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.136682] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.137184] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.137209] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 2.143161] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.143672] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.144019] usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=e005 [ 2.144023] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.144177] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.144811] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.145311] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 2.145349] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 2.150683] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-2] disconnected [ 2.150689] [drm:drm_setup_crtcs] [ 2.150693] [drm:drm_enable_connectors] connector 32 enabled? yes [ 2.150695] [drm:drm_enable_connectors] connector 23 enabled? no [ 2.150697] [drm:drm_enable_connectors] connector 28 enabled? no [ 2.150700] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 2.150704] [drm:drm_enable_connectors] connector 30 enabled? no [ 2.150707] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 2.150712] [drm:drm_enable_connectors] connector 40 enabled? no [ 2.150715] [drm:drm_enable_connectors] connector 42 enabled? no [ 2.150719] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 2.150722] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 2.150726] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:14]: 1366x768 [ 2.150728] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 2.150730] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 2.150732] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 2.150734] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping [ 2.150736] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 2.150739] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 14 (0,0) [ 2.150744] [drm:intelfb_create] no BIOS fb, allocating a new one [ 2.150747] [drm:i915_gem_object_create_stolen] creating stolen object: size=408000 [ 2.150752] [drm:i915_pages_create_for_stolen] offset=0x488000, size=4227072 [ 2.152356] [drm:intelfb_create] allocated 1366x768 fb: 0x004a8000, bo ffff880035fc9500 [ 2.152465] fbcon: inteldrmfb (fb0) is primary device [ 2.152532] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 2.152536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 2.152538] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 2.152541] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 2.152544] [drm:intel_crtc_set_config] [CRTC:14] [FB:45] #connectors=1 (x y) (0 0) [ 2.152545] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 2.152548] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.152551] [drm:drm_mode_debug_printmodeline] Modeline 44:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.152552] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=1, fb_changed=1 [ 2.152553] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 2.152555] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 2.152558] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 2.152559] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 2.152563] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz [ 2.152565] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 2.152566] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000 [ 2.152569] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 2.152571] [drm:intel_dump_pipe_config] [CRTC:14][modeset] config for pipe B [ 2.152572] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 2.152573] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 2.152574] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.152576] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [ 2.152578] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 1778035, gmch_n2: 4194304, link_m2: 98779, link_n2: 524288, tu2: 64 [ 2.152579] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.152580] [drm:intel_dump_pipe_config] requested mode: [ 2.152582] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.152583] [drm:intel_dump_pipe_config] adjusted mode: [ 2.152586] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 2.152588] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 2.152589] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.152590] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 2.152591] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.152592] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.152593] [drm:intel_dump_pipe_config] ips: 0 [ 2.152594] [drm:intel_dump_pipe_config] double wide: 0 [ 2.166677] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 2.181360] [drm:intel_edp_backlight_off] [ 2.214937] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd [ 2.231009] usb 1-2.2: New USB device found, idVendor=0bda, idProduct=0129 [ 2.231011] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.231013] usb 1-2.2: Product: USB2.0-CRW [ 2.231015] usb 1-2.2: Manufacturer: Generic [ 2.231016] usb 1-2.2: SerialNumber: 20100201396000000 [ 2.302667] tsc: Refined TSC clocksource calibration: 1599.946 MHz [ 2.302929] usb 1-2.3: new low-speed USB device number 5 using xhci_hcd [ 2.322888] usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510 [ 2.322890] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.322892] usb 1-2.3: Product: USB Optical Mouse [ 2.322894] usb 1-2.3: Manufacturer: PixArt [ 2.322993] usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.329241] hidraw: raw HID events driver (C) Jiri Kosina [ 2.334406] usbcore: registered new interface driver usbhid [ 2.334407] usbhid: USB HID core driver [ 2.337614] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input9 [ 2.338843] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0 [ 2.382654] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 2.382833] [drm:edp_panel_off] Turn eDP port C panel power off [ 2.382836] [drm:wait_panel_off] Wait for panel power off time [ 2.382840] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 2.430651] [drm:wait_panel_status] Wait complete [ 2.438649] [drm:intel_dp_link_down] [ 2.457569] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4700] [ 2.485699] psmouse serio1: synaptics: queried min coordinates: x [1322..], y [1240..] [ 2.541077] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf40123/0x840300/0x12e800, board id: 3096, fw id: 2019836 [ 2.574830] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 2.574832] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 2.574834] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 2.574852] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 2.576622] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.606642] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 2.606645] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0 [ 2.966635] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 2.966638] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.086629] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 3.086631] [drm:wait_panel_status] Wait complete [ 3.086636] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 3.086639] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 3.253994] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 3.253997] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 3.253999] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 3.254021] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 3.290620] [drm:edp_panel_on] Turn eDP port C panel power on [ 3.290623] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.290626] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 3.290628] [drm:wait_panel_status] Wait complete [ 3.290633] [drm:wait_panel_on] Wait for panel power on [ 3.290636] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 3.302737] Switched to clocksource tsc [ 3.450609] [drm:wait_panel_status] Wait complete [ 3.450613] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 3.450619] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 3.450625] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 3.450630] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 3.754600] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.755224] [drm:intel_dp_start_link_train] clock recovery OK [ 3.756136] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 3.756355] [drm:g4x_check_srwm] SR watermark: display plane 60, cursor 2 [ 3.756356] [drm:g4x_check_srwm] SR watermark: display plane 117, cursor 2 [ 3.756359] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=111, cursor=2, C: plane=2, cursor=2, SR: plane=60, cursor=2 [ 3.770600] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 3.770609] [drm:intel_edp_backlight_on] [ 3.770611] [drm:intel_panel_enable_backlight] pipe B [ 3.770614] [drm:intel_panel_actually_set_backlight] set backlight PWM = 6009 [ 3.770635] [drm:i9xx_update_primary_plane] Writing base 004A8000 00000000 0 0 5504 [ 3.770648] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1] [ 3.770657] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 3.770659] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 3.770662] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 3.770664] [drm:check_encoder_state] [ENCODER:31:TMDS-31] [ 3.770666] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 3.770668] [drm:check_encoder_state] [ENCODER:41:TMDS-41] [ 3.770671] [drm:check_crtc_state] [CRTC:9] [ 3.770674] [drm:check_crtc_state] [CRTC:14] [ 3.778615] ata2: SATA link down (SStatus 1 SControl 300) [ 3.779898] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [ 3.779900] ata2: irq_stat 0x00000040, connection status changed [ 3.779902] ata2: SError: { DevExch } [ 3.779910] ata2: hard resetting link [ 3.802609] [drm:check_crtc_state] [CRTC:19] [ 3.802637] [drm:intel_crtc_set_config] [CRTC:19] [NOFB] [ 3.802640] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:19], mode_changed=0, fb_changed=0 [ 3.802642] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 3.802645] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.802658] Console: switching to colour frame buffer device 170x48 [ 3.802675] [drm:intel_crtc_set_config] [CRTC:14] [FB:45] #connectors=1 (x y) (0 0) [ 3.802677] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 3.802679] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 3.802681] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 3.802684] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 3.802685] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 3.802689] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz [ 3.802691] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 3.802692] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000 [ 3.802694] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 3.802696] [drm:intel_dump_pipe_config] [CRTC:14][modeset] config for pipe B [ 3.802697] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.802698] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 3.802700] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.802702] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [ 3.802703] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 1778035, gmch_n2: 4194304, link_m2: 98779, link_n2: 524288, tu2: 64 [ 3.802704] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.802705] [drm:intel_dump_pipe_config] requested mode: [ 3.802708] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 3.802709] [drm:intel_dump_pipe_config] adjusted mode: [ 3.802712] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 3.802714] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 3.802715] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.802716] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 3.802717] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.802718] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.802719] [drm:intel_dump_pipe_config] ips: 0 [ 3.802720] [drm:intel_dump_pipe_config] double wide: 0 [ 3.808343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.808346] i915 0000:00:02.0: registered panic notifier [ 3.826649] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 3.834641] [drm:cherryview_enable_rps] GPLL enabled? yes [ 3.834644] [drm:cherryview_enable_rps] GPU status: 0x00002010 [ 3.834647] [drm:cherryview_enable_rps] current GPU freq: 320 MHz (32) [ 3.834649] [drm:cherryview_enable_rps] setting GPU freq to 320 MHz (32) [ 3.834652] ------------[ cut here ]------------ [ 3.834679] WARNING: CPU: 0 PID: 28 at /var/lib/dkms/i915-3.19-3.13/3.19.1/build/drivers/gpu/drm/i915/intel_pm.c:4548 valleyview_set_rps+0x167/0x1a0 [i915]() [ 3.834681] WARN_ON(val > dev_priv->rps.max_freq_softlimit) [ 3.834683] Modules linked in: hid_generic usbhid hid i915(OX) i2c_algo_bit psmouse wmi drm_kms_helper(OX) sdhci_acpi sdhci video(OX) drm(OX) ahci libahci [ 3.834700] CPU: 0 PID: 28 Comm: kworker/0:1 Tainted: G OX 3.13.0-53-generic #89-Ubuntu [ 3.834702] Hardware name: Dell Inc. Inspiron 15-3552/079W3P, BIOS 4.0.13 12/22/2016 [ 3.834717] Workqueue: events intel_gen6_powersave_work [i915] [ 3.834720] 0000000000000009 ffff880179691d08 ffffffff81722e1e ffff880179691d50 [ 3.834724] ffff880179691d40 ffffffff810677fd ffff880035fe0000 0000000000000020 [ 3.834728] 0000000000000020 ffff8801738fb000 0000000000000020 ffff880179691da0 [ 3.834732] Call Trace: [ 3.834741] [] dump_stack+0x45/0x56 [ 3.834747] [] warn_slowpath_common+0x7d/0xa0 [ 3.834750] [] warn_slowpath_fmt+0x4c/0x50 [ 3.834767] [] ? drm_ut_debug_printk+0x5e/0x60 [drm] [ 3.834782] [] valleyview_set_rps+0x167/0x1a0 [i915] [ 3.834797] [] intel_gen6_powersave_work+0xb2f/0x11b0 [i915] [ 3.834802] [] process_one_work+0x182/0x450 [ 3.834805] [] worker_thread+0x121/0x410 [ 3.834809] [] ? rescuer_thread+0x430/0x430 [ 3.834813] [] kthread+0xd2/0xf0 [ 3.834816] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 3.834821] [] ret_from_fork+0x58/0x90 [ 3.834824] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 3.834826] ---[ end trace c5e3b0bb83a667c0 ]--- [ 4.993445] [drm:intel_crtc_set_config] [CRTC:14] [FB:45] #connectors=1 (x y) (0 0) [ 4.993453] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 4.993456] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 4.993460] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 4.993464] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 4.993465] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 4.993470] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz [ 4.993472] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 4.993473] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000 [ 4.993476] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 4.993478] [drm:intel_dump_pipe_config] [CRTC:14][modeset] config for pipe B [ 4.993479] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 4.993480] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 4.993482] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.993484] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [ 4.993486] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 1778035, gmch_n2: 4194304, link_m2: 98779, link_n2: 524288, tu2: 64 [ 4.993487] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 4.993487] [drm:intel_dump_pipe_config] requested mode: [ 4.993491] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 4.993492] [drm:intel_dump_pipe_config] adjusted mode: [ 4.993494] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 4.993497] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 4.993498] [drm:intel_dump_pipe_config] port clock: 270000 [ 4.993499] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 4.993500] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.993501] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.993502] [drm:intel_dump_pipe_config] ips: 0 [ 4.993503] [drm:intel_dump_pipe_config] double wide: 0 [ 5.157819] [drm:i915_gem_open] [ 5.157882] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 5.157890] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 5.157895] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 5.157899] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 5.157904] [drm:intel_crtc_set_config] [CRTC:14] [FB:45] #connectors=1 (x y) (0 0) [ 5.157907] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 5.157910] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 5.157913] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 5.157917] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 5.157919] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 5.157925] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz [ 5.157929] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 5.157931] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000 [ 5.157935] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 5.157938] [drm:intel_dump_pipe_config] [CRTC:14][modeset] config for pipe B [ 5.157940] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.157942] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5.157945] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.157947] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [ 5.157950] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 1778035, gmch_n2: 4194304, link_m2: 98779, link_n2: 524288, tu2: 64 [ 5.157952] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.157954] [drm:intel_dump_pipe_config] requested mode: [ 5.157958] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.157960] [drm:intel_dump_pipe_config] adjusted mode: [ 5.157964] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.157967] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 5.157969] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.157971] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5.157974] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.157976] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.157978] [drm:intel_dump_pipe_config] ips: 0 [ 5.157980] [drm:intel_dump_pipe_config] double wide: 0 [ 5.157983] [drm:intel_crtc_set_config] [CRTC:19] [NOFB] [ 5.157986] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:19], mode_changed=0, fb_changed=0 [ 5.157988] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 5.157991] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 5.158015] [drm:i915_gem_open] [ 5.158173] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6] [ 5.158177] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[6] [ 5.158185] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 5.158190] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] [ 5.158193] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1] [ 5.158215] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.158221] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes : [ 5.158225] [drm:drm_mode_debug_printmodeline] Modeline 33:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.158228] [drm:drm_mode_debug_printmodeline] Modeline 34:"1366x768" 40 50870 1366 1374 1384 1558 768 771 772 816 0x40 0x9 [ 5.158233] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 5.163166] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 5.163177] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] [ 5.163181] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1] [ 5.163376] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.163380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 5.163383] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected [ 5.163391] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 5.163399] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 5.163403] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 5.163406] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 5.163412] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 5.163415] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 5.163419] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 5.163421] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] [ 5.163424] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2] [ 5.178565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 5.178571] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected [ 5.178575] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 5.178579] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 5.178582] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-3] [ 5.178584] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-3] [ 5.178587] [drm:intel_display_power_get] enabling dpio-common-d [ 5.202557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 5.202561] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-3] disconnected [ 5.202565] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 5.202570] [drm:drm_mode_getconnector] [CONNECTOR:42:?] [ 5.202572] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-2] [ 5.202574] [drm:intel_dp_detect] [CONNECTOR:42:DP-2] [ 5.202577] [drm:intel_display_power_get] enabling dpio-common-d [ 5.211059] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.211563] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.212063] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.212563] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.213059] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.213077] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5.213573] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.214070] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.214572] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.215068] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.215571] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.215586] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5.223036] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.223538] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.224033] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.224536] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.225034] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.225048] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5.231038] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.231534] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.232035] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.232532] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.233033] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 5.233047] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 5.238552] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-2] disconnected [ 5.238558] [drm:drm_mode_getconnector] [CONNECTOR:42:?] [ 5.238663] [drm:add_framebuffer_internal] [FB:43] [ 5.301263] [drm:add_framebuffer_internal] [FB:43] [ 5.339019] [drm:drm_mode_setcrtc] [CRTC:14] [ 5.339031] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1] [ 5.339036] [drm:intel_crtc_set_config] [CRTC:14] [FB:43] #connectors=1 (x y) (0 0) [ 5.339042] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=1 [ 5.339046] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 5.339052] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 5.339056] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 5.339058] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 5.339064] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz [ 5.339067] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 5.339069] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000 [ 5.339074] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 5.339077] [drm:intel_dump_pipe_config] [CRTC:14][modeset] config for pipe B [ 5.339079] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.339081] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5.339084] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.339087] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [ 5.339089] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 1778035, gmch_n2: 4194304, link_m2: 98779, link_n2: 524288, tu2: 64 [ 5.339092] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.339093] [drm:intel_dump_pipe_config] requested mode: [ 5.339098] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.339100] [drm:intel_dump_pipe_config] adjusted mode: [ 5.339103] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.339107] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 5.339109] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.339111] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5.339113] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.339115] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.339117] [drm:intel_dump_pipe_config] ips: 0 [ 5.339119] [drm:intel_dump_pipe_config] double wide: 0 [ 5.342373] [drm:i9xx_update_primary_plane] Writing base 00000000 00000000 0 0 5504 [ 5.356974] [drm:drm_mode_setcrtc] [CRTC:14] [ 5.356988] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1] [ 5.356993] [drm:intel_crtc_set_config] [CRTC:14] [FB:43] #connectors=1 (x y) (0 0) [ 5.357000] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 5.357004] [drm:intel_modeset_stage_output_state] [CONNECTOR:32:eDP-1] to [CRTC:14] [ 5.357008] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 5.357013] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 5.357015] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 5.357020] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz [ 5.357024] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 5.357026] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000 [ 5.357030] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 5.357033] [drm:intel_dump_pipe_config] [CRTC:14][modeset] config for pipe B [ 5.357035] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.357037] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5.357040] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.357043] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [ 5.357045] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 1778035, gmch_n2: 4194304, link_m2: 98779, link_n2: 524288, tu2: 64 [ 5.357047] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.357049] [drm:intel_dump_pipe_config] requested mode: [ 5.357054] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.357056] [drm:intel_dump_pipe_config] adjusted mode: [ 5.357059] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1374 1384 1558 768 771 772 816 0x48 0x9 [ 5.357063] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1374 1384 1558 768 771 772 816, type: 0x48 flags: 0x9 [ 5.357065] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.357067] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 5.357069] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.357071] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.357073] [drm:intel_dump_pipe_config] ips: 0 [ 5.357075] [drm:intel_dump_pipe_config] double wide: 0 [ 5.598541] raid6: sse2x1 4182 MB/s [ 5.666536] raid6: sse2x2 3702 MB/s [ 5.734533] raid6: sse2x4 5225 MB/s [ 5.734536] raid6: using algorithm sse2x4 (5225 MB/s) [ 5.734538] raid6: using ssse3x2 recovery algorithm [ 5.736936] xor: measuring software checksum speed [ 5.774522] prefetch64-sse: 8597.000 MB/sec [ 5.814520] generic_sse: 7709.000 MB/sec [ 5.814522] xor: using function: prefetch64-sse (8597.000 MB/sec) [ 5.838053] bio: create slab at 1 [ 5.838824] Btrfs loaded [ 6.014543] ata2: SATA link down (SStatus 1 SControl 300) [ 6.014559] ata2: EH complete [ 6.015192] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 6.015198] ata2: irq_stat 0x00000040, connection status changed [ 6.015212] ata2: SError: { CommWake DevExch } [ 6.015221] ata2: limiting SATA link speed to 1.5 Gbps [ 6.015226] ata2: hard resetting link [ 6.126174] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 6.126181] EXT4-fs (sda3): write access will be enabled during recovery [ 6.179689] random: nonblocking pool is initialized [ 6.794606] EXT4-fs (sda3): recovery complete [ 6.797362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 7.262495] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 7.262507] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 8.242456] ata2: COMRESET failed (errno=-32) [ 8.242466] ata2: reset failed (errno=-32), retrying in 8 secs [ 16.014201] ata2: hard resetting link [ 16.921804] Adding 8206332k swap on /dev/sda4. Priority:-1 extents:1 across:8206332k FS [ 17.190785] systemd-udevd[346]: starting version 204 [ 17.218192] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 17.222738] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100 [ 17.225199] ata2.00: configured for UDMA/100 [ 17.234203] ata2: EH complete [ 17.237528] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C1 PQ: 0 ANSI: 5 [ 17.242132] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 17.242160] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 17.242425] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 17.242580] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 17.423987] lp: driver loaded but no devices found [ 17.450923] ppdev: user-space parallel port driver [ 17.564131] device-mapper: multipath: version 1.6.0 loaded [ 17.646987] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.685963] cfg80211: Calling CRDA to update world regulatory domain [ 17.765327] ath9k 0000:01:00.0: enabling device (0000 -> 0002) [ 17.765597] ath: phy0: WB335 1-ANT card detected [ 17.765600] ath: phy0: Set BT/WLAN RX diversity capability [ 17.774075] ath: phy0: Enable LNA combining [ 17.777979] ath: phy0: ASPM enabled: 0x42 [ 17.777986] ath: EEPROM regdomain: 0x6c [ 17.777988] ath: EEPROM indicates we should expect a direct regpair map [ 17.777992] ath: Country alpha2 being used: 00 [ 17.777993] ath: Regpair used: 0x6c [ 17.790719] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 17.791306] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90021700000, irq=16 [ 17.797736] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 18.004687] snd_hda_intel 0000:00:1b.0: Probing card using HDA DKMS, version 0.201601261029~ubuntu14.04.1 [ 18.006050] snd_hda_intel 0000:00:1b.0: irq 134 for MSI/MSI-X [ 18.083680] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 18.083687] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.083691] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 18.083693] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 18.083696] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 18.083700] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 18.083703] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 18.083706] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 18.099257] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 18.281785] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 18.305494] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.305737] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 18.486128] cfg80211: World regulatory domain updated: [ 18.486137] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.486140] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.486142] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.486145] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.486147] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.486149] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.905808] type=1400 audit(1590502505.907:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 18.905821] type=1400 audit(1590502505.907:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 18.905829] type=1400 audit(1590502505.907:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 18.905914] type=1400 audit(1590502505.907:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=644 comm="apparmor_parser" [ 18.905930] type=1400 audit(1590502505.907:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser" [ 18.905938] type=1400 audit(1590502505.907:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser" [ 19.175173] Bluetooth: Core ver 2.17 [ 19.175337] NET: Registered protocol family 31 [ 19.175340] Bluetooth: HCI device and connection manager initialized [ 19.175355] Bluetooth: HCI socket layer initialized [ 19.175359] Bluetooth: L2CAP socket layer initialized [ 19.175367] Bluetooth: SCO socket layer initialized [ 19.193857] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.193862] Bluetooth: BNEP filters: protocol multicast [ 19.193876] Bluetooth: BNEP socket layer initialized [ 19.205050] Bluetooth: RFCOMM TTY layer initialized [ 19.205076] Bluetooth: RFCOMM socket layer initialized [ 19.205087] Bluetooth: RFCOMM ver 1.11 [ 19.282516] type=1400 audit(1590502506.287:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=720 comm="apparmor_parser" [ 19.282529] type=1400 audit(1590502506.287:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=720 comm="apparmor_parser" [ 19.519285] usbcore: registered new interface driver btusb [ 19.655314] usbcore: registered new interface driver ath3k [ 19.759359] init: failsafe main process (700) killed by TERM signal [ 19.760102] init: cups main process (753) killed by HUP signal [ 19.760122] init: cups main process ended, respawning [ 19.846553] usb 1-2.1: USB disconnect, device number 3 [ 20.046429] usb 1-2.1: new full-speed USB device number 6 using xhci_hcd [ 20.063624] usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=e005 [ 20.063631] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 20.415306] rts5139: module is from the staging directory, the quality is unknown, you have been warned. [ 20.468909] scsi2 : SCSI emulation for RTS5139 USB card reader [ 20.469065] usbcore: registered new interface driver rts5139 [ 20.471580] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 20.472408] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 20.489224] type=1400 audit(1590502507.491:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=949 comm="apparmor_parser" [ 20.489240] type=1400 audit(1590502507.491:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=949 comm="apparmor_parser" [ 20.549793] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 20.914101] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.915058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.184719] [drm:i915_gem_open] [ 21.184805] [drm:i915_gem_open] [ 21.184847] [drm:i915_gem_open] [ 21.184885] [drm:i915_gem_open] [ 21.184962] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1] [ 21.190207] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 21.190216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 21.190338] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2] [ 21.206017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 21.207193] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-3] [ 21.207204] [drm:intel_display_power_get] enabling dpio-common-d [ 21.230025] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 21.245018] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1] [ 21.245092] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 21.245142] [drm:intel_dp_detect] [CONNECTOR:42:DP-2] [ 21.245146] [drm:intel_display_power_get] enabling dpio-common-d [ 21.256268] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.256781] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.257928] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.258887] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.259462] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.259602] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 21.260122] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.261007] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.261509] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.262390] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.262904] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.262926] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 21.270850] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.271369] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.271956] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.272463] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.273262] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.273282] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 21.278556] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.279082] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.279879] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.280382] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.280885] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000 [ 21.281137] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064