[204738.869141] sd 0:0:0:0: [sda] Stopping disk
[204739.147285] mei_me 0000:00:16.0: suspend
[204739.162711] i915 0000:00:02.0: power state changed by ACPI to D3cold
[204739.362783] PM: suspend of devices complete after 666.565 msecs
[204739.362887] PM: late suspend of devices complete after 0.101 msecs
[204739.378770] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[204739.394595] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[204739.394905] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[204739.410595] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[204739.410675] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[204739.442666] PM: noirq suspend of devices complete after 79.761 msecs
[204739.443337] ACPI: Preparing to enter system sleep state S3
[204739.446666] PM: Saving platform NVS memory
[204739.447570] Disabling non-boot CPUs ...
[204739.550617] smpboot: CPU 1 is now offline
[204739.654632] smpboot: CPU 2 is now offline
[204739.655102] Broke affinity for irq 23
[204739.655104] Broke affinity for irq 41
[204739.758649] smpboot: CPU 3 is now offline
[204739.759919] ACPI: Low-level resume complete
[204739.759954] PM: Restoring platform NVS memory
[204739.760838] Enabling non-boot CPUs ...
[204739.760872] smpboot: Booting Node 0 Processor 1 APIC 0x1
[204739.771049] Initializing CPU#1
[204739.771811] Disabled fast string operations
[204739.852608] CPU1 is up
[204739.852626] smpboot: Booting Node 0 Processor 2 APIC 0x2
[204739.862770] Initializing CPU#2
[204739.863562] Disabled fast string operations
[204739.944621] CPU2 is up
[204739.944638] smpboot: Booting Node 0 Processor 3 APIC 0x3
[204739.954881] Initializing CPU#3
[204739.955671] Disabled fast string operations
[204740.036642] CPU3 is up
[204740.039888] ACPI: Waking up from system sleep state S3
[204740.106520] i915 0000:00:02.0: power state changed by ACPI to D0
[204740.152599] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[204740.168609] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[204740.184854] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[204740.200609] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[204740.248856] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[204740.248918] PM: noirq resume of devices complete after 142.406 msecs
[204740.249022] PM: early resume of devices complete after 0.083 msecs
[204740.249052] i915 0000:00:02.0: setting latency timer to 64
[204740.249071] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[204740.249445] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[204740.249454] e1000e 0000:00:19.0: setting latency timer to 64
[204740.249478] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[204740.256633] ehci-pci 0000:00:1a.0: setting latency timer to 64
[204740.256728] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[204740.257822] ahci 0000:00:1f.2: setting latency timer to 64
[204740.257861] ehci-pci 0000:00:1d.0: setting latency timer to 64
[204740.263958] [drm] Wrong MCH_SSKPD value: 0x16040307
[204740.263959] [drm] This can cause pipe underruns and display issues.
[204740.263959] [drm] Please upgrade your BIOS to fix this.
[204740.300605] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[204740.468710] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[204740.576646] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[204740.576685] ata5: SATA link down (SStatus 0 SControl 300)
[204740.577215] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[204740.577217] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[204740.577219] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[204740.578086] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[204740.578088] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[204740.578090] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[204740.578366] ata1.00: configured for UDMA/133
[204740.584640] ata2: SATA link down (SStatus 0 SControl 300)
[204740.592736] sd 0:0:0:0: [sda] Starting disk
[204740.636741] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[204740.988804] usb 2-1.2: reset low-speed USB device number 21 using ehci-pci
[204741.269737] usb 2-1.2: device firmware changed
[204741.528911] usb 2-1.1: reset low-speed USB device number 22 using ehci-pci
[204741.809645] usb 2-1.1: device firmware changed
[204741.810069] PM: resume of devices complete after 1560.778 msecs
[204741.810240] PM: Finishing wakeup.
[204741.811093] usb 2-1.1: USB disconnect, device number 22
[204741.810241] Restarting tasks ... done.
[204741.829709] video LNXVIDEO:00: Restoring backlight state
[204741.932935] usb 2-1.1: new low-speed USB device number 23 using ehci-pci
[204741.948841] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[204742.030204] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0040
[204742.030215] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[204742.030222] usb 2-1.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[204742.030228] usb 2-1.1: Manufacturer: Microsoft
[204742.035877] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input46
[204742.036396] hid-generic 0003:045E:0040.001F: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
[204742.036692] usb 2-1.2: USB disconnect, device number 21
[204742.176987] usb 2-1.2: new low-speed USB device number 24 using ehci-pci
[204742.276227] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c313
[204742.276238] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[204742.276245] usb 2-1.2: Product: USB Multimedia Keyboard
[204742.276250] usb 2-1.2: Manufacturer: LITEON Technology
[204742.279830] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input47
[204742.279954] hid-generic 0003:046D:C313.0020: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
[204742.283002] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input48
[204742.283107] hid-generic 0003:046D:C313.0021: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
[204742.285241] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[204742.389130] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[204742.389478] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[204742.393611] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[204742.401185] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[204742.482639] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[204743.573208] wlan0: authenticate with 64:d8:14:b3:8f:00
[204743.583553] wlan0: send auth to 64:d8:14:b3:8f:00 (try 1/3)
[204743.584908] wlan0: authenticated
[204743.585019] wlan0: waiting for beacon from 64:d8:14:b3:8f:00
[204743.626980] wlan0: associate with 64:d8:14:b3:8f:00 (try 1/3)
[204743.629311] wlan0: RX AssocResp from 64:d8:14:b3:8f:00 (capab=0x431 status=0 aid=4)
[204743.636998] wlan0: associated
[204743.637241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[204745.342580] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[204745.342642] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[205303.178436] type=1400 audit(1384851726.386:92): apparmor="STATUS" operation="profile_replace" parent=32311 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=32315 comm="apparmor_parser"
[205303.178448] type=1400 audit(1384851726.386:93): apparmor="STATUS" operation="profile_replace" parent=32311 profile="unconfined" name="/usr/sbin/cupsd" pid=32315 comm="apparmor_parser"
[205303.179233] type=1400 audit(1384851726.386:94): apparmor="STATUS" operation="profile_replace" parent=32311 profile="unconfined" name="/usr/sbin/cupsd" pid=32315 comm="apparmor_parser"
[205418.962244] wlan0: authenticate with a4:18:75:64:e4:10
[205418.968974] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[205418.970348] wlan0: authenticated
[205418.970381] cfg80211: Calling CRDA to update world regulatory domain
[205418.970460] wlan0: waiting for beacon from a4:18:75:64:e4:10
[205418.973417] cfg80211: World regulatory domain updated:
[205418.973422] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[205418.973424] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[205418.973426] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[205418.973428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[205418.973429] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[205418.973431] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[205419.027290] wlan0: associate with a4:18:75:64:e4:10 (try 1/3)
[205419.030031] wlan0: RX AssocResp from a4:18:75:64:e4:10 (capab=0x431 status=0 aid=1)
[205419.033489] wlan0: associated
[207354.434612] cfg80211: Calling CRDA to update world regulatory domain
[207354.437566] cfg80211: World regulatory domain updated:
[207354.437570] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[207354.437572] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[207354.437574] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[207354.437576] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[207354.437578] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[207354.437580] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[207354.612434] wlan0: authenticate with 64:d8:14:b3:8f:00
[207354.631188] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 1/3)
[207354.834159] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 2/3)
[207355.038173] wlan0: send auth to 64:d8:14:b3:8f:00 (try 3/3)
[207355.039269] wlan0: authenticated
[207355.042166] wlan0: associate with 64:d8:14:b3:8f:00 (try 1/3)
[207355.050886] wlan0: RX AssocResp from 64:d8:14:b3:8f:00 (capab=0x431 status=0 aid=2)
[207355.053537] wlan0: associated
[213834.532001] cfg80211: Calling CRDA to update world regulatory domain
[213834.534293] cfg80211: World regulatory domain updated:
[213834.534296] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[213834.534298] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[213834.534299] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[213834.534300] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[213834.534301] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[213834.534302] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[213834.719824] wlan0: authenticate with 64:d8:14:6f:e6:20
[213834.730002] wlan0: send auth to 64:d8:14:6f:e6:20 (try 1/3)
[213834.733021] wlan0: authenticated
[213834.736249] wlan0: associate with 64:d8:14:6f:e6:20 (try 1/3)
[213834.742522] wlan0: RX AssocResp from 64:d8:14:6f:e6:20 (capab=0x431 status=0 aid=5)
[213834.745974] wlan0: associated
[216011.039788] cfg80211: Calling CRDA to update world regulatory domain
[216011.042999] cfg80211: World regulatory domain updated:
[216011.043002] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[216011.043003] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216011.043005] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216011.043006] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[216011.043007] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216011.043008] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216011.264782] wlan0: authenticate with 64:d8:14:87:4e:70
[216011.277170] wlan0: direct probe to 64:d8:14:87:4e:70 (try 1/3)
[216011.479796] wlan0: direct probe to 64:d8:14:87:4e:70 (try 2/3)
[216011.683840] wlan0: direct probe to 64:d8:14:87:4e:70 (try 3/3)
[216011.887958] wlan0: authentication with 64:d8:14:87:4e:70 timed out
[216012.131750] wlan0: authenticate with a4:18:75:65:69:60
[216012.142159] wlan0: send auth to a4:18:75:65:69:60 (try 1/3)
[216012.143714] wlan0: authenticated
[216012.144073] wlan0: waiting for beacon from a4:18:75:65:69:60
[216012.511772] wlan0: authenticate with 64:d8:14:87:ff:60
[216012.520702] wlan0: send auth to 64:d8:14:87:ff:60 (try 1/3)
[216012.524455] wlan0: authenticated
[216012.524822] wlan0: waiting for beacon from 64:d8:14:87:ff:60
[216012.901292] wlan0: authenticate with 64:d8:14:b3:75:50
[216012.914686] wlan0: send auth to 64:d8:14:b3:75:50 (try 1/3)
[216012.956016] wlan0: send auth to 64:d8:14:b3:75:50 (try 2/3)
[216012.979770] wlan0: send auth to 64:d8:14:b3:75:50 (try 3/3)
[216013.006543] wlan0: authentication with 64:d8:14:b3:75:50 timed out
[216013.248828] wlan0: authenticate with a4:18:75:42:f9:30
[216013.259904] wlan0: send auth to a4:18:75:42:f9:30 (try 1/3)
[216013.263695] wlan0: authenticated
[216013.264127] wlan0: associate with a4:18:75:42:f9:30 (try 1/3)
[216013.266129] wlan0: RX AssocResp from a4:18:75:42:f9:30 (capab=0x431 status=0 aid=3)
[216013.269183] wlan0: associated
[216340.482439] wlan0: authenticate with a4:18:75:65:5d:50
[216340.488769] wlan0: direct probe to a4:18:75:65:5d:50 (try 1/3)
[216340.490042] cfg80211: Calling CRDA to update world regulatory domain
[216340.494506] cfg80211: World regulatory domain updated:
[216340.494510] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[216340.494512] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216340.494514] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216340.494516] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[216340.494518] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216340.494520] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216340.691389] wlan0: direct probe to a4:18:75:65:5d:50 (try 2/3)
[216341.138988] wlan0: direct probe to a4:18:75:65:5d:50 (try 3/3)
[216341.633588] wlan0: authentication with a4:18:75:65:5d:50 timed out
[216341.645555] wlan0: authenticate with a4:18:75:64:e4:10
[216341.655211] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[216341.874763] wlan0: send auth to a4:18:75:64:e4:10 (try 2/3)
[216342.055761] wlan0: send auth to a4:18:75:64:e4:10 (try 3/3)
[216342.236283] wlan0: authentication with a4:18:75:64:e4:10 timed out
[216342.251507] wlan0: authenticate with 64:d8:14:6f:e6:20
[216342.266189] wlan0: send auth to 64:d8:14:6f:e6:20 (try 1/3)
[216342.275467] wlan0: authenticated
[216342.475295] wlan0: authenticate with a4:18:75:65:69:60
[216342.487232] wlan0: direct probe to a4:18:75:65:69:60 (try 1/3)
[216342.687742] wlan0: direct probe to a4:18:75:65:69:60 (try 2/3)
[216342.891748] wlan0: direct probe to a4:18:75:65:69:60 (try 3/3)
[216343.095783] wlan0: authentication with a4:18:75:65:69:60 timed out
[216343.300012] wlan0: authenticate with 18:33:9d:f8:83:20
[216343.304602] wlan0: send auth to 18:33:9d:f8:83:20 (try 1/3)
[216343.360052] wlan0: send auth to 18:33:9d:f8:83:20 (try 2/3)
[216343.408600] wlan0: send auth to 18:33:9d:f8:83:20 (try 3/3)
[216343.460353] wlan0: authentication with 18:33:9d:f8:83:20 timed out
[216343.622541] wlan0: authenticate with 64:d8:14:b3:75:50
[216343.634733] wlan0: send auth to 64:d8:14:b3:75:50 (try 1/3)
[216343.655892] wlan0: authenticated
[216343.659892] wlan0: associate with 64:d8:14:b3:75:50 (try 1/3)
[216343.694516] wlan0: RX AssocResp from 64:d8:14:b3:75:50 (capab=0x431 status=0 aid=8)
[216343.698009] wlan0: associated
[216351.961731] cfg80211: Calling CRDA to update world regulatory domain
[216351.964558] cfg80211: World regulatory domain updated:
[216351.964562] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[216351.964565] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216351.964566] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216351.964568] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[216351.964570] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216351.964572] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216352.095301] wlan0: authenticate with a4:18:75:42:f9:30
[216352.105262] wlan0: send auth to a4:18:75:42:f9:30 (try 1/3)
[216352.135186] wlan0: send auth to a4:18:75:42:f9:30 (try 2/3)
[216352.170060] wlan0: send auth to a4:18:75:42:f9:30 (try 3/3)
[216352.205881] wlan0: authentication with a4:18:75:42:f9:30 timed out
[216352.368396] wlan0: authenticate with a4:18:75:65:5d:e0
[216352.378561] wlan0: direct probe to a4:18:75:65:5d:e0 (try 1/3)
[216352.581453] wlan0: direct probe to a4:18:75:65:5d:e0 (try 2/3)
[216352.785501] wlan0: direct probe to a4:18:75:65:5d:e0 (try 3/3)
[216352.989486] wlan0: authentication with a4:18:75:65:5d:e0 timed out
[216353.544730] wlan0: authenticate with 64:d8:14:87:ff:60
[216353.557743] wlan0: send auth to 64:d8:14:87:ff:60 (try 1/3)
[216353.665664] wlan0: send auth to 64:d8:14:87:ff:60 (try 2/3)
[216353.785654] wlan0: send auth to 64:d8:14:87:ff:60 (try 3/3)
[216353.905734] wlan0: authentication with 64:d8:14:87:ff:60 timed out
[216354.070973] wlan0: authenticate with a4:18:75:65:5d:50
[216354.082636] wlan0: send auth to a4:18:75:65:5d:50 (try 1/3)
[216354.193781] wlan0: send auth to a4:18:75:65:5d:50 (try 2/3)
[216354.194997] wlan0: authenticated
[216354.197730] wlan0: associate with a4:18:75:65:5d:50 (try 1/3)
[216354.199774] wlan0: RX AssocResp from a4:18:75:65:5d:50 (capab=0x431 status=0 aid=1)
[216354.203947] wlan0: associated
[216354.499896] wlan0: deauthenticated from a4:18:75:65:5d:50 (Reason: 23)
[216354.513984] cfg80211: Calling CRDA to update world regulatory domain
[216354.522000] cfg80211: World regulatory domain updated:
[216354.522010] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[216354.522016] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216354.522021] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216354.522026] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[216354.522030] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216354.522034] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216355.086498] wlan0: authenticate with a4:18:75:65:64:00
[216355.099382] wlan0: send auth to a4:18:75:65:64:00 (try 1/3)
[216355.209840] wlan0: send auth to a4:18:75:65:64:00 (try 2/3)
[216355.301727] wlan0: authenticated
[216355.301897] wlan0: waiting for beacon from a4:18:75:65:64:00
[216355.353851] wlan0: associate with a4:18:75:65:64:00 (try 1/3)
[216355.356889] wlan0: RX AssocResp from a4:18:75:65:64:00 (capab=0x431 status=0 aid=1)
[216355.361030] wlan0: associated
[216529.091672] cfg80211: Calling CRDA to update world regulatory domain
[216529.098990] cfg80211: World regulatory domain updated:
[216529.099003] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[216529.099011] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216529.099018] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216529.099025] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[216529.099031] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216529.099037] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216529.542239] wlan0: authenticate with a4:18:75:64:e4:10
[216529.552172] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[216529.659416] wlan0: send auth to a4:18:75:64:e4:10 (try 2/3)
[216529.663212] wlan0: authenticated
[216529.663648] wlan0: waiting for beacon from a4:18:75:64:e4:10
[216529.715397] wlan0: associate with a4:18:75:64:e4:10 (try 1/3)
[216529.717625] wlan0: RX AssocResp from a4:18:75:64:e4:10 (capab=0x431 status=0 aid=1)
[216529.722305] wlan0: associated
[216539.820130] wlan0: disassociating from a4:18:75:64:e4:10 by local choice (reason=3)
[216539.827293] wlan0: deauthenticating from a4:18:75:64:e4:10 by local choice (reason=3)
[216539.827795] cfg80211: Calling CRDA to update world regulatory domain
[216539.830341] cfg80211: World regulatory domain updated:
[216539.830344] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[216539.830346] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216539.830347] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216539.830348] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[216539.830349] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216539.830351] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[216544.089924] wlan0: authenticate with 64:d8:14:b3:8f:00
[216544.102217] wlan0: send auth to 64:d8:14:b3:8f:00 (try 1/3)
[216544.105322] wlan0: authenticated
[216544.105485] wlan0: waiting for beacon from 64:d8:14:b3:8f:00
[216544.177776] wlan0: associate with 64:d8:14:b3:8f:00 (try 1/3)
[216544.185107] wlan0: RX AssocResp from 64:d8:14:b3:8f:00 (capab=0x431 status=0 aid=2)
[216544.187889] wlan0: associated
[218862.861628] window-stack-br[2454]: segfault at 4 ip b72c70d7 sp bfe16e40 error 4 in libQt5DBus.so.5.0.2[b729a000+74000]
[221390.129271] usb 2-1.2: USB disconnect, device number 24
[221390.168923] e1000e: eth0 NIC Link is Down
[221391.921531] usb 2-1.1: USB disconnect, device number 23
[221393.326102] thinkpad_acpi: EC reports that Thermal Table has changed
[221400.725902] [drm:i915_hangcheck_elapsed] *ERROR* stuck on render ring
[221400.725912] [drm:i915_hangcheck_elapsed] *ERROR* stuck on blitter ring
[221433.474957] wlan0: authenticate with a4:18:75:65:5d:e0
[221433.487027] wlan0: send auth to a4:18:75:65:5d:e0 (try 1/3)
[221433.487741] cfg80211: Calling CRDA to update world regulatory domain
[221433.489716] wlan0: authenticated
[221433.490078] wlan0: waiting for beacon from a4:18:75:65:5d:e0
[221433.494537] cfg80211: World regulatory domain updated:
[221433.494541] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[221433.494544] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221433.494546] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221433.494548] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[221433.494549] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221433.494551] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221433.575457] wlan0: associate with a4:18:75:65:5d:e0 (try 1/3)
[221433.582422] wlan0: RX AssocResp from a4:18:75:65:5d:e0 (capab=0x431 status=0 aid=12)
[221433.586050] wlan0: associated
[221461.772418] e1000e 0000:00:19.0: setting latency timer to 64
[221461.772486] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[221462.334701] wlan0: deauthenticating from a4:18:75:65:5d:e0 by local choice (reason=3)
[221462.343109] cfg80211: Calling CRDA to update world regulatory domain
[221462.347543] cfg80211: World regulatory domain updated:
[221462.347547] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[221462.347549] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221462.347551] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221462.347552] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[221462.347554] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221462.347556] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221462.974693] PM: Syncing filesystems ... done.
[221463.004215] PM: Preparing system for mem sleep
[221463.004548] Freezing user space processes ... (elapsed 0.001 seconds) done.
[221463.006129] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[221463.007474] PM: Entering mem sleep
[221463.007520] Suspending console(s) (use no_console_suspend to debug)
[221463.178120] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[221463.178202] sd 0:0:0:0: [sda] Stopping disk
[221463.457373] mei_me 0000:00:16.0: suspend
[221463.472501] i915 0000:00:02.0: power state changed by ACPI to D3cold
[221463.668693] PM: suspend of devices complete after 660.977 msecs
[221463.668793] PM: late suspend of devices complete after 0.098 msecs
[221463.684716] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[221463.700539] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[221463.700849] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[221463.716538] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[221463.716617] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[221463.748630] PM: noirq suspend of devices complete after 79.815 msecs
[221463.749302] ACPI: Preparing to enter system sleep state S3
[221463.752611] PM: Saving platform NVS memory
[221463.753674] Disabling non-boot CPUs ...
[221463.856563] smpboot: CPU 1 is now offline
[221463.960579] smpboot: CPU 2 is now offline
[221463.961023] Broke affinity for irq 23
[221463.961024] Broke affinity for irq 41
[221464.064593] smpboot: CPU 3 is now offline
[221464.067067] ACPI: Low-level resume complete
[221464.067146] PM: Restoring platform NVS memory
[221464.069266] Enabling non-boot CPUs ...
[221464.069350] smpboot: Booting Node 0 Processor 1 APIC 0x1
[221464.080127] Initializing CPU#1
[221464.080864] Disabled fast string operations
[221464.112977] CPU1 is up
[221464.113035] smpboot: Booting Node 0 Processor 2 APIC 0x2
[221464.123640] Initializing CPU#2
[221464.124001] Disabled fast string operations
[221464.156986] CPU2 is up
[221464.157042] smpboot: Booting Node 0 Processor 3 APIC 0x3
[221464.167745] Initializing CPU#3
[221464.168103] Disabled fast string operations
[221464.200983] CPU3 is up
[221464.209937] ACPI: Waking up from system sleep state S3
[221464.281809] i915 0000:00:02.0: power state changed by ACPI to D0
[221464.328923] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[221464.344932] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[221464.361370] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[221464.376933] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[221464.425104] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[221464.425239] PM: noirq resume of devices complete after 143.490 msecs
[221464.425513] PM: early resume of devices complete after 0.231 msecs
[221464.425568] i915 0000:00:02.0: setting latency timer to 64
[221464.425635] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[221464.425711] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[221464.425734] e1000e 0000:00:19.0: setting latency timer to 64
[221464.425794] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[221464.425981] ehci-pci 0000:00:1a.0: setting latency timer to 64
[221464.426302] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[221464.426638] ehci-pci 0000:00:1d.0: setting latency timer to 64
[221464.426682] ahci 0000:00:1f.2: setting latency timer to 64
[221464.455861] [drm] Wrong MCH_SSKPD value: 0x16040307
[221464.455863] [drm] This can cause pipe underruns and display issues.
[221464.455864] [drm] Please upgrade your BIOS to fix this.
[221464.476940] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[221464.645056] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[221464.772973] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[221464.773574] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[221464.773580] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[221464.773585] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[221464.774539] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[221464.774546] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[221464.774550] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[221464.774832] ata1.00: configured for UDMA/133
[221464.780979] ata2: SATA link down (SStatus 0 SControl 300)
[221464.788978] ata5: SATA link down (SStatus 0 SControl 300)
[221464.789120] sd 0:0:0:0: [sda] Starting disk
[221464.809093] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[221464.935998] PM: resume of devices complete after 510.390 msecs
[221464.936448] PM: Finishing wakeup.
[221464.936452] Restarting tasks ... done.
[221464.957786] video LNXVIDEO:00: Restoring backlight state
[221465.572473] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[221465.673223] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[221465.674070] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[221465.678176] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[221465.686343] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[221465.720530] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[221465.753096] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[221466.730017] wlan0: authenticate with 64:d8:14:b3:8f:00
[221466.743405] wlan0: send auth to 64:d8:14:b3:8f:00 (try 1/3)
[221466.756688] wlan0: authenticated
[221466.757255] wlan0: associate with 64:d8:14:b3:8f:00 (try 1/3)
[221466.768921] wlan0: RX AssocResp from 64:d8:14:b3:8f:00 (capab=0x431 status=0 aid=5)
[221466.772194] wlan0: associated
[221466.772214] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[221470.181904] e1000e 0000:00:19.0: setting latency timer to 64
[221470.181932] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[221473.367555] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[221473.367623] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[221476.155108] usb 2-1.2: new low-speed USB device number 25 using ehci-pci
[221476.254512] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c313
[221476.254525] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[221476.254531] usb 2-1.2: Product: USB Multimedia Keyboard
[221476.254537] usb 2-1.2: Manufacturer: LITEON Technology
[221476.259713] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input49
[221476.260178] hid-generic 0003:046D:C313.0022: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
[221476.263936] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input50
[221476.264372] hid-generic 0003:046D:C313.0023: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
[221480.735813] usb 2-1.1: new low-speed USB device number 26 using ehci-pci
[221480.833303] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0040
[221480.833315] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[221480.833322] usb 2-1.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[221480.833328] usb 2-1.1: Manufacturer: Microsoft
[221480.838080] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input51
[221480.838563] hid-generic 0003:045E:0040.0024: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
[221483.963373] thinkpad_acpi: EC reports that Thermal Table has changed
[222981.709457] wlan0: authenticate with a4:18:75:64:e4:10
[222981.723093] wlan0: direct probe to a4:18:75:64:e4:10 (try 1/3)
[222981.723228] cfg80211: Calling CRDA to update world regulatory domain
[222981.726171] cfg80211: World regulatory domain updated:
[222981.726175] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[222981.726177] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222981.726179] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222981.726181] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[222981.726183] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222981.726185] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222981.942627] wlan0: send auth to a4:18:75:64:e4:10 (try 2/3)
[222982.164761] wlan0: send auth to a4:18:75:64:e4:10 (try 3/3)
[222982.383569] wlan0: authentication with a4:18:75:64:e4:10 timed out
[222982.405815] wlan0: authenticate with a4:18:75:65:69:60
[222982.423177] wlan0: direct probe to a4:18:75:65:69:60 (try 1/3)
[222982.623494] wlan0: send auth to a4:18:75:65:69:60 (try 2/3)
[222982.629291] wlan0: authenticated
[222982.822974] wlan0: authenticate with 64:d8:14:87:ff:60
[222982.838846] wlan0: send auth to 64:d8:14:87:ff:60 (try 1/3)
[222982.947508] wlan0: send auth to 64:d8:14:87:ff:60 (try 2/3)
[222982.950142] wlan0: authenticated
[222982.951491] wlan0: associate with 64:d8:14:87:ff:60 (try 1/3)
[222982.953544] wlan0: RX AssocResp from 64:d8:14:87:ff:60 (capab=0x431 status=0 aid=4)
[222982.957113] wlan0: associated
[223497.150521] cfg80211: Calling CRDA to update world regulatory domain
[223497.157811] cfg80211: World regulatory domain updated:
[223497.157820] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[223497.157827] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[223497.157832] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[223497.157836] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[223497.157840] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[223497.157845] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[223497.328881] wlan0: authenticate with a4:18:75:65:5d:50
[223497.339683] wlan0: direct probe to a4:18:75:65:5d:50 (try 1/3)
[223497.542336] wlan0: direct probe to a4:18:75:65:5d:50 (try 2/3)
[223497.746366] wlan0: direct probe to a4:18:75:65:5d:50 (try 3/3)
[223497.950468] wlan0: authentication with a4:18:75:65:5d:50 timed out
[223498.150774] wlan0: authenticate with 64:d8:14:b3:75:30
[223498.160514] wlan0: direct probe to 64:d8:14:b3:75:30 (try 1/3)
[223498.362476] wlan0: direct probe to 64:d8:14:b3:75:30 (try 2/3)
[223498.566499] wlan0: direct probe to 64:d8:14:b3:75:30 (try 3/3)
[223498.770582] wlan0: authentication with 64:d8:14:b3:75:30 timed out
[223499.315663] wlan0: authenticate with a4:18:75:65:64:00
[223499.326669] wlan0: direct probe to a4:18:75:65:64:00 (try 1/3)
[223499.530674] wlan0: direct probe to a4:18:75:65:64:00 (try 2/3)
[223499.734713] wlan0: direct probe to a4:18:75:65:64:00 (try 3/3)
[223499.938849] wlan0: authentication with a4:18:75:65:64:00 timed out
[223500.591598] wlan0: authenticate with a4:18:75:64:e4:10
[223500.602528] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[223500.706868] wlan0: send auth to a4:18:75:64:e4:10 (try 2/3)
[223500.708020] wlan0: authenticated
[223500.708171] wlan0: waiting for beacon from a4:18:75:64:e4:10
[223500.770879] wlan0: associate with a4:18:75:64:e4:10 (try 1/3)
[223500.773880] wlan0: RX AssocResp from a4:18:75:64:e4:10 (capab=0x431 status=0 aid=1)
[223500.778688] wlan0: associated
[228925.456655] usb 2-1.2: USB disconnect, device number 25
[228925.743373] e1000e: eth0 NIC Link is Down
[228927.504822] usb 2-1.1: USB disconnect, device number 26
[228929.544932] thinkpad_acpi: EC reports that Thermal Table has changed
[229102.800356] wlan0: authenticate with 64:d8:14:87:ff:60
[229102.812308] wlan0: send auth to 64:d8:14:87:ff:60 (try 1/3)
[229102.812413] cfg80211: Calling CRDA to update world regulatory domain
[229102.816350] cfg80211: World regulatory domain updated:
[229102.816354] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[229102.816356] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229102.816358] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229102.816360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[229102.816362] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229102.816364] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229103.028499] wlan0: send auth to 64:d8:14:87:ff:60 (try 2/3)
[229103.251248] wlan0: send auth to 64:d8:14:87:ff:60 (try 3/3)
[229103.470680] wlan0: authentication with 64:d8:14:87:ff:60 timed out
[229103.484636] wlan0: authenticate with 64:d8:14:87:4e:70
[229103.503085] wlan0: send auth to 64:d8:14:87:4e:70 (try 1/3)
[229103.507284] wlan0: authenticated
[229103.725641] wlan0: authenticate with a4:18:75:64:e4:10
[229103.730430] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[229103.832949] wlan0: send auth to a4:18:75:64:e4:10 (try 2/3)
[229103.834954] wlan0: authenticated
[229103.836954] wlan0: associate with a4:18:75:64:e4:10 (try 1/3)
[229103.940965] wlan0: associate with a4:18:75:64:e4:10 (try 2/3)
[229103.992858] wlan0: associate with a4:18:75:64:e4:10 (try 3/3)
[229104.149004] wlan0: association with a4:18:75:64:e4:10 timed out
[229104.393225] wlan0: authenticate with a4:18:75:65:5d:50
[229104.408306] wlan0: send auth to a4:18:75:65:5d:50 (try 1/3)
[229104.473693] wlan0: send auth to a4:18:75:65:5d:50 (try 2/3)
[229104.527283] wlan0: send auth to a4:18:75:65:5d:50 (try 3/3)
[229104.645083] wlan0: authentication with a4:18:75:65:5d:50 timed out
[229104.884818] wlan0: authenticate with 18:33:9d:f8:83:20
[229104.896853] wlan0: send auth to 18:33:9d:f8:83:20 (try 1/3)
[229104.900985] wlan0: authenticated
[229104.905123] wlan0: associate with 18:33:9d:f8:83:20 (try 1/3)
[229104.909527] wlan0: RX AssocResp from 18:33:9d:f8:83:20 (capab=0x431 status=0 aid=2)
[229104.912216] wlan0: associated
[229342.987631] cfg80211: Calling CRDA to update world regulatory domain
[229342.989595] wlan0: authenticate with 64:d8:14:6f:e6:20
[229343.001899] wlan0: send auth to 64:d8:14:6f:e6:20 (try 1/3)
[229343.002036] cfg80211: World regulatory domain updated:
[229343.002039] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[229343.002040] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229343.002042] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229343.002043] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[229343.002044] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229343.002045] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[229343.060144] wlan0: send auth to 64:d8:14:6f:e6:20 (try 2/3)
[229343.061861] wlan0: authenticated
[229343.065337] wlan0: associate with 64:d8:14:6f:e6:20 (try 1/3)
[229343.086037] wlan0: RX AssocResp from 64:d8:14:6f:e6:20 (capab=0x431 status=0 aid=5)
[229343.088712] wlan0: associated
[230405.156798] usb 2-1.2: new low-speed USB device number 27 using ehci-pci
[230405.256359] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c313
[230405.256370] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[230405.256377] usb 2-1.2: Product: USB Multimedia Keyboard
[230405.256382] usb 2-1.2: Manufacturer: LITEON Technology
[230405.261448] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input52
[230405.265219] hid-generic 0003:046D:C313.0025: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
[230405.269322] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input53
[230405.269707] hid-generic 0003:046D:C313.0026: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
[230408.393494] usb 2-1.1: new low-speed USB device number 28 using ehci-pci
[230408.490708] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0040
[230408.490712] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[230408.490714] usb 2-1.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[230408.490716] usb 2-1.1: Manufacturer: Microsoft
[230408.493917] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input54
[230408.494093] hid-generic 0003:045E:0040.0027: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
[230412.791932] thinkpad_acpi: EC reports that Thermal Table has changed
[230416.439763] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[232780.473605] e1000e: eth0 NIC Link is Down
[232784.623976] thinkpad_acpi: EC reports that Thermal Table has changed
[232785.028041] usb 2-1.1: USB disconnect, device number 28
[232787.332613] usb 2-1.2: USB disconnect, device number 27
[232788.739236] wlan0: deauthenticating from 64:d8:14:6f:e6:20 by local choice (reason=3)
[232788.749049] cfg80211: Calling CRDA to update world regulatory domain
[232788.751602] cfg80211: World regulatory domain updated:
[232788.751606] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[232788.751608] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[232788.751610] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[232788.751612] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[232788.751614] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[232788.751615] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[232789.529165] PM: Syncing filesystems ... done.
[232789.556297] PM: Preparing system for mem sleep
[232789.556467] Freezing user space processes ... (elapsed 0.001 seconds) done.
[232789.558014] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[232789.559339] PM: Entering mem sleep
[232789.559393] Suspending console(s) (use no_console_suspend to debug)
[232789.728488] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[232789.728572] sd 0:0:0:0: [sda] Stopping disk
[232790.007346] mei_me 0000:00:16.0: suspend
[232790.070803] i915 0000:00:02.0: power state changed by ACPI to D3cold
[232790.218942] PM: suspend of devices complete after 659.352 msecs
[232790.219051] PM: late suspend of devices complete after 0.107 msecs
[232790.234910] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[232790.250758] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[232790.251070] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[232790.266757] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[232790.266836] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[232790.298824] PM: noirq suspend of devices complete after 79.756 msecs
[232790.299496] ACPI: Preparing to enter system sleep state S3
[232790.303023] PM: Saving platform NVS memory
[232790.304073] Disabling non-boot CPUs ...
[232790.406780] smpboot: CPU 1 is now offline
[232790.510795] smpboot: CPU 2 is now offline
[232790.511265] Broke affinity for irq 23
[232790.511267] Broke affinity for irq 41
[232790.614810] smpboot: CPU 3 is now offline
[232790.616069] ACPI: Low-level resume complete
[232790.616104] PM: Restoring platform NVS memory
[232790.616990] Enabling non-boot CPUs ...
[232790.617025] smpboot: Booting Node 0 Processor 1 APIC 0x1
[232790.627197] Initializing CPU#1
[232790.627963] Disabled fast string operations
[232790.708766] CPU1 is up
[232790.708787] smpboot: Booting Node 0 Processor 2 APIC 0x2
[232790.719031] Initializing CPU#2
[232790.719823] Disabled fast string operations
[232790.800781] CPU2 is up
[232790.800801] smpboot: Booting Node 0 Processor 3 APIC 0x3
[232790.811044] Initializing CPU#3
[232790.811835] Disabled fast string operations
[232790.892796] CPU3 is up
[232790.896023] ACPI: Waking up from system sleep state S3
[232790.959339] thinkpad_acpi: EC reports that Thermal Table has changed
[232790.963610] i915 0000:00:02.0: power state changed by ACPI to D0
[232791.008765] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[232791.024771] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[232791.041014] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[232791.056773] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[232791.105050] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[232791.105108] PM: noirq resume of devices complete after 141.506 msecs
[232791.105209] PM: early resume of devices complete after 0.080 msecs
[232791.105239] i915 0000:00:02.0: setting latency timer to 64
[232791.105259] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[232791.105336] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[232791.105345] e1000e 0000:00:19.0: setting latency timer to 64
[232791.105375] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[232791.105433] ehci-pci 0000:00:1a.0: setting latency timer to 64
[232791.105539] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[232791.105663] ehci-pci 0000:00:1d.0: setting latency timer to 64
[232791.105680] ahci 0000:00:1f.2: setting latency timer to 64
[232791.120219] [drm] Wrong MCH_SSKPD value: 0x16040307
[232791.120220] [drm] This can cause pipe underruns and display issues.
[232791.120221] [drm] Please upgrade your BIOS to fix this.
[232791.152791] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[232791.316987] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[232791.448813] ata5: SATA link down (SStatus 0 SControl 300)
[232791.448845] ata2: SATA link down (SStatus 0 SControl 300)
[232791.456806] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[232791.457378] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[232791.457380] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[232791.457382] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[232791.458283] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[232791.458285] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[232791.458286] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[232791.458564] ata1.00: configured for UDMA/133
[232791.472921] sd 0:0:0:0: [sda] Starting disk
[232791.480996] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[232791.610181] PM: resume of devices complete after 504.883 msecs
[232791.610338] PM: Finishing wakeup.
[232791.610339] Restarting tasks ... done.
[232791.620953] video LNXVIDEO:00: Restoring backlight state
[232791.692842] usb 2-1.1: new low-speed USB device number 29 using ehci-pci
[232791.788610] usb 2-1.1: New USB device found, idVendor=192f, idProduct=0916
[232791.788615] usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[232791.788618] usb 2-1.1: Product: USB Optical Mouse
[232791.791863] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input55
[232791.792021] hid-generic 0003:192F:0916.0028: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[232791.860871] usb 2-1.2: new low-speed USB device number 30 using ehci-pci
[232791.967891] usb 2-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[232791.967896] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[232791.967899] usb 2-1.2: Product: USB Keykoard
[232791.967901] usb 2-1.2: Manufacturer: USB
[232791.973414] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input56
[232791.974085] hid-generic 0003:1C4F:0002.0029: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input0
[232791.977305] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input57
[232791.978074] hid-generic 0003:1C4F:0002.002A: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input1
[232792.068232] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[232792.168932] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[232792.169158] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[232792.170546] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[232792.178506] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[232792.215042] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[232792.628971] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[232793.307955] wlan0: authenticate with a0:21:b7:f5:d8:ac
[232793.318299] wlan0: send auth to a0:21:b7:f5:d8:ac (try 1/3)
[232793.323488] wlan0: authenticated
[232793.325184] wlan0: associate with a0:21:b7:f5:d8:ac (try 1/3)
[232793.329107] wlan0: RX AssocResp from a0:21:b7:f5:d8:ac (capab=0x411 status=0 aid=4)
[232793.331494] wlan0: associated
[232793.331527] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[233421.939105] type=1400 audit(1384937509.311:95): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="lxc-container-default" pid=16188 comm="apparmor_parser"
[233421.939504] type=1400 audit(1384937509.315:96): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="lxc-container-default-with-nesting" pid=16188 comm="apparmor_parser"
[233422.275835] type=1400 audit(1384937509.651:97): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=16185 comm="apparmor_parser"
[233422.303796] type=1400 audit(1384937509.679:98): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="chromium_browser" pid=16185 comm="apparmor_parser"
[233422.343696] type=1400 audit(1384937509.719:99): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=16187 comm="apparmor_parser"
[233422.375841] type=1400 audit(1384937509.751:100): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="chromium_browser" pid=16187 comm="apparmor_parser"
[233422.382919] type=1400 audit(1384937509.755:101): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=16186 comm="apparmor_parser"
[233422.404018] type=1400 audit(1384937509.779:102): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="chromium_browser" pid=16186 comm="apparmor_parser"
[233422.406766] type=1400 audit(1384937509.779:103): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/bin/lxc-start" pid=16192 comm="apparmor_parser"
[233427.512314] audit_printk_skb: 48 callbacks suppressed
[233427.512317] type=1400 audit(1384937514.887:120): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/bin/evince" pid=16190 comm="apparmor_parser"
[233427.570082] type=1400 audit(1384937514.943:121): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="sanitized_helper" pid=16190 comm="apparmor_parser"
[233427.575113] type=1400 audit(1384937514.947:122): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/bin/evince-previewer" pid=16190 comm="apparmor_parser"
[233427.594362] type=1400 audit(1384937514.967:123): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="sanitized_helper" pid=16190 comm="apparmor_parser"
[233427.602948] type=1400 audit(1384937514.975:124): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=16190 comm="apparmor_parser"
[233427.616904] type=1400 audit(1384937514.991:125): apparmor="STATUS" operation="profile_replace" parent=16180 profile="unconfined" name="sanitized_helper" pid=16190 comm="apparmor_parser"
[233427.890111] type=1400 audit(1384937515.263:126): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="lxc-container-default" pid=16455 comm="apparmor_parser"
[233427.890463] type=1400 audit(1384937515.263:127): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="lxc-container-default-with-nesting" pid=16455 comm="apparmor_parser"
[233428.259589] type=1400 audit(1384937515.631:128): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=16452 comm="apparmor_parser"
[233428.289192] type=1400 audit(1384937515.663:129): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=16453 comm="apparmor_parser"
[233432.929255] audit_printk_skb: 54 callbacks suppressed
[233432.929258] type=1400 audit(1384937520.303:148): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="/usr/bin/evince" pid=16457 comm="apparmor_parser"
[233432.971524] type=1400 audit(1384937520.343:149): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="sanitized_helper" pid=16457 comm="apparmor_parser"
[233432.976586] type=1400 audit(1384937520.347:150): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="/usr/bin/evince-previewer" pid=16457 comm="apparmor_parser"
[233432.988239] type=1400 audit(1384937520.359:151): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="sanitized_helper" pid=16457 comm="apparmor_parser"
[233432.995783] type=1400 audit(1384937520.367:152): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=16457 comm="apparmor_parser"
[233433.010006] type=1400 audit(1384937520.383:153): apparmor="STATUS" operation="profile_replace" parent=16447 profile="unconfined" name="sanitized_helper" pid=16457 comm="apparmor_parser"
[246465.519340] usb 2-1.2: USB disconnect, device number 30
[246466.799426] usb 2-1.1: USB disconnect, device number 29
[246468.075262] thinkpad_acpi: EC reports that Thermal Table has changed
[246469.290348] e1000e 0000:00:19.0: setting latency timer to 64
[246469.290381] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[246469.646540] wlan0: deauthenticating from a0:21:b7:f5:d8:ac by local choice (reason=3)
[246469.655906] cfg80211: Calling CRDA to update world regulatory domain
[246469.659601] cfg80211: World regulatory domain updated:
[246469.659605] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[246469.659607] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[246469.659609] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[246469.659610] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[246469.659612] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[246469.659613] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[246470.452290] PM: Syncing filesystems ... done.
[246470.482940] PM: Preparing system for mem sleep
[246470.483106] Freezing user space processes ... (elapsed 0.001 seconds) done.
[246470.484630] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[246470.485927] PM: Entering mem sleep
[246470.485979] Suspending console(s) (use no_console_suspend to debug)
[246470.657904] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[246470.657995] sd 0:0:0:0: [sda] Stopping disk
[246470.935411] mei_me 0000:00:16.0: suspend
[246470.950727] i915 0000:00:02.0: power state changed by ACPI to D3cold
[246471.150732] PM: suspend of devices complete after 664.562 msecs
[246471.150832] PM: late suspend of devices complete after 0.098 msecs
[246471.166757] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[246471.182581] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[246471.182886] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[246471.198579] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[246471.198659] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[246471.230646] PM: noirq suspend of devices complete after 79.796 msecs
[246471.231318] ACPI: Preparing to enter system sleep state S3
[246471.234649] PM: Saving platform NVS memory
[246471.235489] Disabling non-boot CPUs ...
[246471.338600] smpboot: CPU 1 is now offline
[246471.442616] smpboot: CPU 2 is now offline
[246471.546631] smpboot: CPU 3 is now offline
[246471.547894] ACPI: Low-level resume complete
[246471.547929] PM: Restoring platform NVS memory
[246471.548795] Enabling non-boot CPUs ...
[246471.548831] smpboot: Booting Node 0 Processor 1 APIC 0x1
[246471.558984] Initializing CPU#1
[246471.559769] Disabled fast string operations
[246471.640587] CPU1 is up
[246471.640604] smpboot: Booting Node 0 Processor 2 APIC 0x2
[246471.650749] Initializing CPU#2
[246471.651541] Disabled fast string operations
[246471.732601] CPU2 is up
[246471.732618] smpboot: Booting Node 0 Processor 3 APIC 0x3
[246471.742860] Initializing CPU#3
[246471.743652] Disabled fast string operations
[246471.824625] CPU3 is up
[246471.827824] ACPI: Waking up from system sleep state S3
[246471.891228] thinkpad_acpi: EC reports that Thermal Table has changed
[246471.895676] i915 0000:00:02.0: power state changed by ACPI to D0
[246471.940581] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[246471.956588] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[246471.972841] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[246471.988598] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[246472.036855] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[246472.036912] PM: noirq resume of devices complete after 141.244 msecs
[246472.037017] PM: early resume of devices complete after 0.083 msecs
[246472.037039] i915 0000:00:02.0: setting latency timer to 64
[246472.037049] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[246472.037058] e1000e 0000:00:19.0: setting latency timer to 64
[246472.037072] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[246472.037086] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[246472.037169] ahci 0000:00:1f.2: setting latency timer to 64
[246472.037215] ehci-pci 0000:00:1a.0: setting latency timer to 64
[246472.037445] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[246472.037558] ehci-pci 0000:00:1d.0: setting latency timer to 64
[246472.048767] [drm] Wrong MCH_SSKPD value: 0x16040307
[246472.048767] [drm] This can cause pipe underruns and display issues.
[246472.048768] [drm] Please upgrade your BIOS to fix this.
[246472.088715] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[246472.248762] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[246472.372634] ata5: SATA link down (SStatus 0 SControl 300)
[246472.372667] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[246472.373237] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[246472.373239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[246472.373241] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[246472.374206] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[246472.374208] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[246472.374210] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[246472.374555] ata1.00: configured for UDMA/133
[246472.380633] ata2: SATA link down (SStatus 0 SControl 300)
[246472.388723] sd 0:0:0:0: [sda] Starting disk
[246472.412712] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[246472.542040] PM: resume of devices complete after 504.934 msecs
[246472.542196] PM: Finishing wakeup.
[246472.542197] Restarting tasks ... done.
[246472.572519] video LNXVIDEO:00: Restoring backlight state
[246472.624744] usb 2-1.1: new low-speed USB device number 31 using ehci-pci
[246472.721887] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0040
[246472.721891] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[246472.721894] usb 2-1.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[246472.721896] usb 2-1.1: Manufacturer: Microsoft
[246472.725051] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input58
[246472.725887] hid-generic 0003:045E:0040.002B: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
[246472.796799] usb 2-1.2: new low-speed USB device number 32 using ehci-pci
[246472.841342] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[246472.895984] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c313
[246472.895995] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[246472.896002] usb 2-1.2: Product: USB Multimedia Keyboard
[246472.896007] usb 2-1.2: Manufacturer: LITEON Technology
[246472.899914] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input59
[246472.900408] hid-generic 0003:046D:C313.002C: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
[246472.903630] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input60
[246472.904246] hid-generic 0003:046D:C313.002D: input,hidraw2: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
[246472.944727] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[246472.944943] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[246472.946578] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[246472.959624] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[246473.006587] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[246473.940847] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[246474.007772] wlan0: authenticate with 64:d8:14:b3:8f:00
[246474.018653] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 1/3)
[246474.220922] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 2/3)
[246474.424941] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 3/3)
[246474.628970] wlan0: authentication with 64:d8:14:b3:8f:00 timed out
[246474.874762] wlan0: authenticate with 64:d8:14:87:4e:70
[246474.891242] wlan0: direct probe to 64:d8:14:87:4e:70 (try 1/3)
[246475.093052] wlan0: direct probe to 64:d8:14:87:4e:70 (try 2/3)
[246475.297104] wlan0: send auth to 64:d8:14:87:4e:70 (try 3/3)
[246475.301448] wlan0: authenticated
[246475.305103] wlan0: associate with 64:d8:14:87:4e:70 (try 1/3)
[246475.308911] wlan0: RX AssocResp from 64:d8:14:87:4e:70 (capab=0x431 status=0 aid=1)
[246475.314950] wlan0: associated
[246475.314978] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[246475.834264] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[246475.834301] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[250661.586912] cfg80211: Calling CRDA to update world regulatory domain
[250661.589786] cfg80211: World regulatory domain updated:
[250661.589790] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[250661.589792] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250661.589794] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250661.589796] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[250661.589797] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250661.589799] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250661.777552] wlan0: authenticate with a4:18:75:65:64:00
[250661.786752] wlan0: send auth to a4:18:75:65:64:00 (try 1/3)
[250661.788270] wlan0: authenticated
[250661.789259] wlan0: waiting for beacon from a4:18:75:65:64:00
[250661.817025] wlan0: associate with a4:18:75:65:64:00 (try 1/3)
[250661.819500] wlan0: RX AssocResp from a4:18:75:65:64:00 (capab=0x431 status=0 aid=1)
[250661.822630] wlan0: associated
[250749.425717] wlan0: authenticate with a4:18:75:65:69:60
[250749.432683] wlan0: send auth to a4:18:75:65:69:60 (try 1/3)
[250749.432788] cfg80211: Calling CRDA to update world regulatory domain
[250749.435795] cfg80211: World regulatory domain updated:
[250749.435799] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[250749.435801] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250749.435835] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250749.435837] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[250749.435839] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250749.435841] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[250749.440840] wlan0: authenticated
[250749.440995] wlan0: waiting for beacon from a4:18:75:65:69:60
[250749.463827] wlan0: associate with a4:18:75:65:69:60 (try 1/3)
[250749.465979] wlan0: RX AssocResp from a4:18:75:65:69:60 (capab=0x431 status=0 aid=1)
[250749.468808] wlan0: associated
[250798.324014] chromium-browse[3256]: segfault at 18 ip b46cba35 sp bface160 error 4 in libcontent.so[b41ff000+c06000]
[251829.571884] wlan0: authenticate with a4:18:75:64:e4:10
[251829.584056] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[251829.584292] cfg80211: Calling CRDA to update world regulatory domain
[251829.594494] wlan0: authenticated
[251829.595236] cfg80211: World regulatory domain updated:
[251829.595239] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[251829.595242] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[251829.595244] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[251829.595246] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[251829.595248] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[251829.595250] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[251829.595295] wlan0: waiting for beacon from a4:18:75:64:e4:10
[251829.766488] wlan0: associate with a4:18:75:64:e4:10 (try 1/3)
[251829.802631] wlan0: RX AssocResp from a4:18:75:64:e4:10 (capab=0x431 status=0 aid=1)
[251829.807478] wlan0: associated
[252649.945101] cfg80211: Calling CRDA to update world regulatory domain
[252649.947937] cfg80211: World regulatory domain updated:
[252649.947940] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[252649.947942] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[252649.947944] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[252649.947945] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[252649.947947] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[252649.947948] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[252650.121379] wlan0: authenticate with 64:d8:14:6f:e6:20
[252650.134796] wlan0: send auth to 64:d8:14:6f:e6:20 (try 1/3)
[252650.142060] wlan0: authenticated
[252650.142464] wlan0: waiting for beacon from 64:d8:14:6f:e6:20
[252650.473363] wlan0: authenticate with 64:d8:14:87:ff:60
[252650.485409] wlan0: send auth to 64:d8:14:87:ff:60 (try 1/3)
[252650.499522] wlan0: authenticated
[252650.499713] wlan0: waiting for beacon from 64:d8:14:87:ff:60
[252650.821095] wlan0: authenticate with a4:18:75:65:5d:50
[252650.831199] wlan0: send auth to a4:18:75:65:5d:50 (try 1/3)
[252650.936918] wlan0: send auth to a4:18:75:65:5d:50 (try 2/3)
[252650.938390] wlan0: authenticated
[252650.938542] wlan0: waiting for beacon from a4:18:75:65:5d:50
[252650.948930] wlan0: associate with a4:18:75:65:5d:50 (try 1/3)
[252650.951132] wlan0: RX AssocResp from a4:18:75:65:5d:50 (capab=0x431 status=0 aid=10)
[252650.956741] wlan0: associated
[253235.163826] cfg80211: Calling CRDA to update world regulatory domain
[253235.171260] cfg80211: World regulatory domain updated:
[253235.171269] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[253235.171275] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253235.171281] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253235.171285] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[253235.171290] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253235.171294] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253235.373427] wlan0: authenticate with a4:18:75:65:64:00
[253235.385841] wlan0: send auth to a4:18:75:65:64:00 (try 1/3)
[253235.395066] wlan0: authenticated
[253235.395197] wlan0: waiting for beacon from a4:18:75:65:64:00
[253235.435583] wlan0: associate with a4:18:75:65:64:00 (try 1/3)
[253235.449346] wlan0: RX AssocResp from a4:18:75:65:64:00 (capab=0x431 status=0 aid=5)
[253235.452151] wlan0: associated
[253269.876294] wlan0: authenticate with 64:d8:14:b3:75:50
[253269.891544] wlan0: send auth to 64:d8:14:b3:75:50 (try 1/3)
[253269.891795] cfg80211: Calling CRDA to update world regulatory domain
[253269.894647] cfg80211: World regulatory domain updated:
[253269.894651] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[253269.894654] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253269.894656] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253269.894658] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[253269.894660] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253269.894661] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[253269.895596] wlan0: authenticated
[253269.896071] wlan0: waiting for beacon from 64:d8:14:b3:75:50
[253269.917407] wlan0: associate with 64:d8:14:b3:75:50 (try 1/3)
[253269.939158] wlan0: RX AssocResp from 64:d8:14:b3:75:50 (capab=0x431 status=0 aid=3)
[253269.941406] wlan0: associated
[258106.986656] e1000e: eth0 NIC Link is Down
[258107.591149] usb 2-1.2: USB disconnect, device number 32
[258109.127279] usb 2-1.1: USB disconnect, device number 31
[258111.095462] thinkpad_acpi: EC reports that Thermal Table has changed
[258158.923813] wlan0: deauthenticating from 64:d8:14:b3:75:50 by local choice (reason=3)
[258158.934917] cfg80211: Calling CRDA to update world regulatory domain
[258158.937689] cfg80211: World regulatory domain updated:
[258158.937693] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[258158.937695] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258158.937697] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258158.937698] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[258158.937700] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258158.937702] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258159.403219] wlan0: authenticate with 64:d8:14:b3:8f:00
[258159.433804] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 1/3)
[258159.635038] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 2/3)
[258159.839070] wlan0: direct probe to 64:d8:14:b3:8f:00 (try 3/3)
[258160.043092] wlan0: authentication with 64:d8:14:b3:8f:00 timed out
[258160.248445] wlan0: authenticate with 64:d8:14:87:4e:70
[258160.261241] wlan0: send auth to 64:d8:14:87:4e:70 (try 1/3)
[258160.273555] wlan0: authenticated
[258160.273704] wlan0: waiting for beacon from 64:d8:14:87:4e:70
[258160.371182] wlan0: associate with 64:d8:14:87:4e:70 (try 1/3)
[258160.380994] wlan0: RX AssocResp from 64:d8:14:87:4e:70 (capab=0x431 status=0 aid=1)
[258160.384176] wlan0: associated
[258202.871363] [drm:i915_hangcheck_elapsed] *ERROR* stuck on render ring
[258202.871368] [drm:i915_hangcheck_elapsed] *ERROR* stuck on blitter ring
[258758.457476] e1000e 0000:00:19.0: setting latency timer to 64
[258758.457544] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[258761.575156] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[258762.882535] thinkpad_acpi: EC reports that Thermal Table has changed
[258764.130463] usb 2-1.2: new low-speed USB device number 33 using ehci-pci
[258764.229650] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c313
[258764.229661] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[258764.229667] usb 2-1.2: Product: USB Multimedia Keyboard
[258764.229673] usb 2-1.2: Manufacturer: LITEON Technology
[258764.234568] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input61
[258764.235002] hid-generic 0003:046D:C313.002E: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
[258764.238905] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input62
[258764.239289] hid-generic 0003:046D:C313.002F: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
[258770.335252] usb 2-1.1: new low-speed USB device number 34 using ehci-pci
[258770.432911] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0040
[258770.432923] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[258770.432930] usb 2-1.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[258770.432935] usb 2-1.1: Manufacturer: Microsoft
[258770.437904] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input63
[258770.439881] hid-generic 0003:045E:0040.0030: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
[258934.679362] wlan0: authenticate with a4:18:75:64:e4:10
[258934.694832] wlan0: send auth to a4:18:75:64:e4:10 (try 1/3)
[258934.695953] cfg80211: Calling CRDA to update world regulatory domain
[258934.698954] wlan0: authenticated
[258934.699096] wlan0: waiting for beacon from a4:18:75:64:e4:10
[258934.700139] cfg80211: World regulatory domain updated:
[258934.700142] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[258934.700144] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258934.700146] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258934.700148] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[258934.700150] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258934.700152] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[258934.915974] wlan0: associate with a4:18:75:64:e4:10 (try 1/3)
[258934.926594] wlan0: RX AssocResp from a4:18:75:64:e4:10 (capab=0x431 status=0 aid=1)
[258934.946889] wlan0: associated
[259609.107810] cfg80211: Calling CRDA to update world regulatory domain
[259609.112783] cfg80211: World regulatory domain updated:
[259609.112788] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[259609.112790] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259609.112793] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259609.112795] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[259609.112797] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259609.112799] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259609.302121] wlan0: authenticate with 18:33:9d:f8:83:20
[259609.318507] wlan0: send auth to 18:33:9d:f8:83:20 (try 1/3)
[259609.324538] wlan0: authenticated
[259609.324780] wlan0: waiting for beacon from 18:33:9d:f8:83:20
[259609.334598] wlan0: associate with 18:33:9d:f8:83:20 (try 1/3)
[259609.339150] wlan0: RX AssocResp from 18:33:9d:f8:83:20 (capab=0x431 status=0 aid=3)
[259609.342905] wlan0: associated
[259619.346198] wlan0: disassociating from 18:33:9d:f8:83:20 by local choice (reason=3)
[259619.355990] wlan0: deauthenticating from 18:33:9d:f8:83:20 by local choice (reason=3)
[259619.356982] cfg80211: Calling CRDA to update world regulatory domain
[259619.363429] cfg80211: World regulatory domain updated:
[259619.363439] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[259619.363445] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259619.363450] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259619.363490] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[259619.363497] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259619.363504] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259620.887977] wlan0: authenticate with 64:d8:14:6f:e6:20
[259620.889914] wlan0: send auth to 64:d8:14:6f:e6:20 (try 1/3)
[259620.995744] wlan0: send auth to 64:d8:14:6f:e6:20 (try 2/3)
[259621.024688] wlan0: send auth to 64:d8:14:6f:e6:20 (try 3/3)
[259621.077171] wlan0: authentication with 64:d8:14:6f:e6:20 timed out
[259621.248863] wlan0: authenticate with 64:d8:14:87:4e:70
[259621.261094] wlan0: send auth to 64:d8:14:87:4e:70 (try 1/3)
[259621.263300] wlan0: authenticated
[259621.263794] wlan0: associate with 64:d8:14:87:4e:70 (try 1/3)
[259621.272641] wlan0: RX AssocResp from 64:d8:14:87:4e:70 (capab=0x431 status=0 aid=1)
[259621.275387] wlan0: associated
[260799.931315] e1000e: eth0 NIC Link is Down
[260803.684848] thinkpad_acpi: EC reports that Thermal Table has changed
[260805.156745] usb 2-1.1: USB disconnect, device number 34
[260807.973205] usb 2-1.2: USB disconnect, device number 33
[264372.327271] thinkpad_acpi: EC reports that Thermal Table has changed
[264375.378711] usb 2-1.2: new low-speed USB device number 35 using ehci-pci
[264375.477553] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c313
[264375.477556] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[264375.477558] usb 2-1.2: Product: USB Multimedia Keyboard
[264375.477560] usb 2-1.2: Manufacturer: LITEON Technology
[264375.480956] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input64
[264375.481076] hid-generic 0003:046D:C313.0031: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
[264375.483974] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input65
[264375.484096] hid-generic 0003:046D:C313.0032: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
[264375.682893] usb 2-1.1: new low-speed USB device number 36 using ehci-pci
[264375.780305] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0040
[264375.780318] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[264375.780325] usb 2-1.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[264375.780330] usb 2-1.1: Manufacturer: Microsoft
[264375.785184] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input66
[264375.785620] hid-generic 0003:045E:0040.0033: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.1/input0
[264390.402184] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[265573.183801] e1000e: eth0 NIC Link is Down
[265573.666398] usb 2-1.2: USB disconnect, device number 35
[265574.946622] usb 2-1.1: USB disconnect, device number 36
[265576.365452] thinkpad_acpi: EC reports that Thermal Table has changed
[265585.249134] wlan0: deauthenticating from 64:d8:14:87:4e:70 by local choice (reason=3)
[265585.255231] cfg80211: Calling CRDA to update world regulatory domain
[265585.258488] cfg80211: World regulatory domain updated:
[265585.258491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[265585.258494] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265585.258496] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265585.258498] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[265585.258500] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265585.258502] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265585.902571] PM: Syncing filesystems ... done.
[265585.937218] PM: Preparing system for mem sleep
[265585.937398] Freezing user space processes ... (elapsed 0.001 seconds) done.
[265585.938964] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[265585.940260] PM: Entering mem sleep
[265585.940312] Suspending console(s) (use no_console_suspend to debug)
[265586.106696] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[265586.106782] sd 0:0:0:0: [sda] Stopping disk
[265586.390385] mei_me 0000:00:16.0: suspend
[265586.405593] i915 0000:00:02.0: power state changed by ACPI to D3cold
[265586.597707] PM: suspend of devices complete after 657.205 msecs
[265586.597807] PM: late suspend of devices complete after 0.098 msecs
[265586.613739] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[265586.629562] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[265586.629875] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[265586.645561] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[265586.645641] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[265586.677629] PM: noirq suspend of devices complete after 79.804 msecs
[265586.678301] ACPI: Preparing to enter system sleep state S3
[265586.681613] PM: Saving platform NVS memory
[265586.682514] Disabling non-boot CPUs ...
[265586.785584] smpboot: CPU 1 is now offline
[265586.889602] smpboot: CPU 2 is now offline
[265586.993615] smpboot: CPU 3 is now offline
[265586.996101] ACPI: Low-level resume complete
[265586.996175] PM: Restoring platform NVS memory
[265586.998299] Enabling non-boot CPUs ...
[265586.998385] smpboot: Booting Node 0 Processor 1 APIC 0x1
[265587.009049] Initializing CPU#1
[265587.009774] Disabled fast string operations
[265587.041999] CPU1 is up
[265587.042057] smpboot: Booting Node 0 Processor 2 APIC 0x2
[265587.052662] Initializing CPU#2
[265587.053023] Disabled fast string operations
[265587.086001] CPU2 is up
[265587.086054] smpboot: Booting Node 0 Processor 3 APIC 0x3
[265587.096758] Initializing CPU#3
[265587.097117] Disabled fast string operations
[265587.130010] CPU3 is up
[265587.138920] ACPI: Waking up from system sleep state S3
[265587.210807] i915 0000:00:02.0: power state changed by ACPI to D0
[265587.257947] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[265587.273955] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[265587.290398] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[265587.305957] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[265587.354059] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[265587.354193] PM: noirq resume of devices complete after 143.445 msecs
[265587.354467] PM: early resume of devices complete after 0.231 msecs
[265587.354542] i915 0000:00:02.0: setting latency timer to 64
[265587.354589] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[265587.354872] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[265587.354892] e1000e 0000:00:19.0: setting latency timer to 64
[265587.354955] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[265587.355052] ehci-pci 0000:00:1a.0: setting latency timer to 64
[265587.355319] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[265587.355669] ehci-pci 0000:00:1d.0: setting latency timer to 64
[265587.355712] ahci 0000:00:1f.2: setting latency timer to 64
[265587.397451] [drm] Wrong MCH_SSKPD value: 0x16040307
[265587.397453] [drm] This can cause pipe underruns and display issues.
[265587.397454] [drm] Please upgrade your BIOS to fix this.
[265587.413978] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[265587.566174] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[265587.689986] ata5: SATA link down (SStatus 0 SControl 300)
[265587.697989] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[265587.698585] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[265587.698592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[265587.698597] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[265587.699545] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[265587.699552] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[265587.699557] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[265587.699838] ata1.00: configured for UDMA/133
[265587.705992] ata2: SATA link down (SStatus 0 SControl 300)
[265587.714124] sd 0:0:0:0: [sda] Starting disk
[265587.734215] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[265587.861168] PM: resume of devices complete after 506.607 msecs
[265587.861614] PM: Finishing wakeup.
[265587.861618] Restarting tasks ... done.
[265587.885744] video LNXVIDEO:00: Restoring backlight state
[265588.580006] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[265588.682168] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[265588.682828] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[265588.684875] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[265588.692423] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[265588.734569] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[265589.066206] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[265610.497948] wlan0: authenticate with 00:3a:99:b2:61:42
[265610.502566] wlan0: send auth to 00:3a:99:b2:61:42 (try 1/3)
[265610.503993] wlan0: authenticated
[265610.506846] wlan0: associate with 00:3a:99:b2:61:42 (try 1/3)
[265610.509055] wlan0: RX AssocResp from 00:3a:99:b2:61:42 (capab=0x421 status=0 aid=2)
[265610.511412] wlan0: associated
[265610.511444] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[265610.511550] cfg80211: Calling CRDA for country: GB
[265610.514679] cfg80211: Regulatory domain changed to country: GB
[265610.514683] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[265610.514685] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[265610.514687] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[265610.514689] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[265610.514691] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[265610.514693] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[265938.252016] wlan0: authenticate with 00:3a:99:b2:6b:02
[265938.255218] wlan0: direct probe to 00:3a:99:b2:6b:02 (try 1/3)
[265938.257166] cfg80211: Calling CRDA to update world regulatory domain
[265938.260022] cfg80211: World regulatory domain updated:
[265938.260026] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[265938.260028] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265938.260031] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265938.260032] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[265938.260034] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265938.260036] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[265938.457207] wlan0: send auth to 00:3a:99:b2:6b:02 (try 2/3)
[265938.459610] wlan0: authenticated
[265938.615852] wlan0: authenticate with 00:3a:99:b2:61:42
[265938.620691] wlan0: send auth to 00:3a:99:b2:61:42 (try 1/3)
[265938.622089] wlan0: authenticated
[265938.625233] wlan0: associate with 00:3a:99:b2:61:42 (try 1/3)
[265938.632274] wlan0: RX AssocResp from 00:3a:99:b2:61:42 (capab=0x421 status=0 aid=2)
[265938.635624] wlan0: associated
[265938.635694] cfg80211: Calling CRDA for country: GB
[265938.638262] cfg80211: Regulatory domain changed to country: GB
[265938.638265] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[265938.638267] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[265938.638268] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[265938.638269] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[265938.638270] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[265938.638271] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[266136.994778] e1000e 0000:00:19.0: setting latency timer to 64
[266136.994804] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[266137.354213] wlan0: deauthenticating from 00:3a:99:b2:61:42 by local choice (reason=3)
[266137.366467] cfg80211: Calling CRDA to update world regulatory domain
[266137.374895] cfg80211: World regulatory domain updated:
[266137.374908] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[266137.374918] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[266137.374926] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[266137.374934] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[266137.374941] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[266137.374948] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[266138.015268] PM: Syncing filesystems ... done.
[266138.048229] PM: Preparing system for mem sleep
[266138.048410] Freezing user space processes ... (elapsed 0.001 seconds) done.
[266138.049876] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[266138.051167] PM: Entering mem sleep
[266138.051208] Suspending console(s) (use no_console_suspend to debug)
[266138.217460] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[266138.217546] sd 0:0:0:0: [sda] Stopping disk
[266138.495569] mei_me 0000:00:16.0: suspend
[266138.511125] i915 0000:00:02.0: power state changed by ACPI to D3cold
[266138.707150] PM: suspend of devices complete after 655.754 msecs
[266138.707251] PM: late suspend of devices complete after 0.098 msecs
[266138.723173] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[266138.738997] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[266138.739308] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[266138.754996] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[266138.755075] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[266138.787064] PM: noirq suspend of devices complete after 79.796 msecs
[266138.787736] ACPI: Preparing to enter system sleep state S3
[266138.791046] PM: Saving platform NVS memory
[266138.791953] Disabling non-boot CPUs ...
[266138.895016] smpboot: CPU 1 is now offline
[266138.999033] smpboot: CPU 2 is now offline
[266138.999490] Broke affinity for irq 23
[266138.999491] Broke affinity for irq 41
[266139.103050] smpboot: CPU 3 is now offline
[266139.105503] ACPI: Low-level resume complete
[266139.105579] PM: Restoring platform NVS memory
[266139.107692] Enabling non-boot CPUs ...
[266139.107775] smpboot: Booting Node 0 Processor 1 APIC 0x1
[266139.118581] Initializing CPU#1
[266139.119107] Disabled fast string operations
[266139.151431] CPU1 is up
[266139.151482] smpboot: Booting Node 0 Processor 2 APIC 0x2
[266139.162087] Initializing CPU#2
[266139.162448] Disabled fast string operations
[266139.195491] CPU2 is up
[266139.195549] smpboot: Booting Node 0 Processor 3 APIC 0x3
[266139.206299] Initializing CPU#3
[266139.206526] Disabled fast string operations
[266139.239446] CPU3 is up
[266139.248339] ACPI: Waking up from system sleep state S3
[266139.320205] i915 0000:00:02.0: power state changed by ACPI to D0
[266139.367373] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[266139.383384] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[266139.399820] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[266139.415384] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[266139.463485] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[266139.463624] PM: noirq resume of devices complete after 143.480 msecs
[266139.463900] PM: early resume of devices complete after 0.232 msecs
[266139.463975] i915 0000:00:02.0: setting latency timer to 64
[266139.464018] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[266139.464212] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[266139.464273] e1000e 0000:00:19.0: setting latency timer to 64
[266139.464338] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[266139.471460] ahci 0000:00:1f.2: setting latency timer to 64
[266139.471989] ehci-pci 0000:00:1a.0: setting latency timer to 64
[266139.472184] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[266139.472295] ehci-pci 0000:00:1d.0: setting latency timer to 64
[266139.508182] [drm] Wrong MCH_SSKPD value: 0x16040307
[266139.508184] [drm] This can cause pipe underruns and display issues.
[266139.508186] [drm] Please upgrade your BIOS to fix this.
[266139.515368] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[266139.683540] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[266139.791422] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[266139.792010] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[266139.792016] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[266139.792021] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[266139.792969] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[266139.792975] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[266139.792980] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[266139.793260] ata1.00: configured for UDMA/133
[266139.799417] ata5: SATA link down (SStatus 0 SControl 300)
[266139.807566] sd 0:0:0:0: [sda] Starting disk
[266139.815429] ata2: SATA link down (SStatus 0 SControl 300)
[266139.851583] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[266139.978665] PM: resume of devices complete after 514.668 msecs
[266139.979122] PM: Finishing wakeup.
[266139.979126] Restarting tasks ... done.
[266139.990554] video LNXVIDEO:00: Restoring backlight state
[266140.819713] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[266140.923695] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[266140.923937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[266140.925677] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[266140.933361] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[266140.994430] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[266141.163615] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[266141.902399] wlan0: authenticate with 00:3a:99:b2:62:42
[266141.914175] wlan0: send auth to 00:3a:99:b2:62:42 (try 1/3)
[266141.916450] wlan0: authenticated
[266141.919866] wlan0: associate with 00:3a:99:b2:62:42 (try 1/3)
[266141.923647] wlan0: RX AssocResp from 00:3a:99:b2:62:42 (capab=0x421 status=0 aid=1)
[266141.926265] wlan0: associated
[266141.926295] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[266141.926393] cfg80211: Calling CRDA for country: GB
[266141.928893] cfg80211: Regulatory domain changed to country: GB
[266141.928897] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[266141.928899] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[266141.928901] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[266141.928902] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[266141.928904] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[266141.928905] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[266540.887536] vboxdrv: Found 4 processor cores.
[266540.887727] vboxdrv: fAsync=0 offMin=0x30f offMax=0x1a72
[266540.887830] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[266540.887832] vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
[266540.939118] vboxpci: IOMMU not found (not registered)
[266564.632387] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[266629.810333] usb 2-1.2: new high-speed USB device number 37 using ehci-pci
[266629.904725] usb 2-1.2: New USB device found, idVendor=154b, idProduct=007a
[266629.904736] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[266629.904742] usb 2-1.2: Product: USB 2.0 FD
[266629.904748] usb 2-1.2: Manufacturer: PNY Technologies
[266629.904753] usb 2-1.2: SerialNumber: AD7AHE03000000241
[266629.947405] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[266629.947475] scsi6 : usb-storage 2-1.2:1.0
[266629.947567] usbcore: registered new interface driver usb-storage
[266631.433726] scsi 6:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
[266631.434247] sd 6:0:0:0: Attached scsi generic sg1 type 0
[266631.437901] sd 6:0:0:0: [sdb] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
[266631.438653] sd 6:0:0:0: [sdb] Write Protect is off
[266631.438657] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[266631.439402] sd 6:0:0:0: [sdb] No Caching mode page found
[266631.439406] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[266631.444316] sd 6:0:0:0: [sdb] No Caching mode page found
[266631.444331] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[266631.445332]  sdb: sdb1
[266631.448422] sd 6:0:0:0: [sdb] No Caching mode page found
[266631.448433] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[266631.448441] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[266664.391002] usb 2-1.2: USB disconnect, device number 37
[267670.169704] device vethV8CPK7 entered promiscuous mode
[267670.169867] IPv6: ADDRCONF(NETDEV_UP): vethV8CPK7: link is not ready
[267670.169872] lxcbr0: port 1(vethV8CPK7) entered forwarding state
[267670.169877] lxcbr0: port 1(vethV8CPK7) entered forwarding state
[267670.171286] lxcbr0: port 1(vethV8CPK7) entered disabled state
[267670.230791] IPv6: ADDRCONF(NETDEV_CHANGE): vethV8CPK7: link becomes ready
[267670.230861] lxcbr0: port 1(vethV8CPK7) entered forwarding state
[267670.230876] lxcbr0: port 1(vethV8CPK7) entered forwarding state
[267685.264314] lxcbr0: port 1(vethV8CPK7) entered forwarding state
[267982.689625] lxcbr0: port 1(vethV8CPK7) entered disabled state
[267982.691826] device vethV8CPK7 left promiscuous mode
[267982.691840] lxcbr0: port 1(vethV8CPK7) entered disabled state
[267983.261992] init: juju-agent-mthaddon-local main process (8456) terminated with status 2
[268045.965349] init: juju-agent-mthaddon-local main process (10750) terminated with status 2
[268081.207263] e1000e 0000:00:19.0: setting latency timer to 64
[268081.207291] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[268081.562653] wlan0: deauthenticating from 00:3a:99:b2:62:42 by local choice (reason=3)
[268081.573117] cfg80211: Calling CRDA to update world regulatory domain
[268081.581580] cfg80211: World regulatory domain updated:
[268081.581584] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[268081.581586] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[268081.581588] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[268081.581590] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[268081.581592] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[268081.581594] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[268082.284242] PM: Syncing filesystems ... done.
[268082.307600] PM: Preparing system for mem sleep
[268082.307893] Freezing user space processes ... (elapsed 0.001 seconds) done.
[268082.309430] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[268082.310765] PM: Entering mem sleep
[268082.310808] Suspending console(s) (use no_console_suspend to debug)
[268082.483592] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[268082.483679] sd 0:0:0:0: [sda] Stopping disk
[268082.764261] mei_me 0000:00:16.0: suspend
[268082.779525] i915 0000:00:02.0: power state changed by ACPI to D3cold
[268082.971641] PM: suspend of devices complete after 660.636 msecs
[268082.971742] PM: late suspend of devices complete after 0.098 msecs
[268082.987664] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[268083.003487] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[268083.003797] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[268083.019486] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[268083.019565] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[268083.051555] PM: noirq suspend of devices complete after 79.795 msecs
[268083.052226] ACPI: Preparing to enter system sleep state S3
[268083.055529] PM: Saving platform NVS memory
[268083.056355] Disabling non-boot CPUs ...
[268083.159506] smpboot: CPU 1 is now offline
[268083.263526] smpboot: CPU 2 is now offline
[268083.367541] smpboot: CPU 3 is now offline
[268083.368858] ACPI: Low-level resume complete
[268083.368894] PM: Restoring platform NVS memory
[268083.369771] Enabling non-boot CPUs ...
[268083.369806] smpboot: Booting Node 0 Processor 1 APIC 0x1
[268083.379959] Initializing CPU#1
[268083.380744] Disabled fast string operations
[268083.461502] CPU1 is up
[268083.461519] smpboot: Booting Node 0 Processor 2 APIC 0x2
[268083.471664] Initializing CPU#2
[268083.472455] Disabled fast string operations
[268083.553520] CPU2 is up
[268083.553542] smpboot: Booting Node 0 Processor 3 APIC 0x3
[268083.563746] Initializing CPU#3
[268083.564480] Disabled fast string operations
[268083.645532] CPU3 is up
[268083.648747] ACPI: Waking up from system sleep state S3
[268083.712052] thinkpad_acpi: EC reports that Thermal Table has changed
[268083.716361] i915 0000:00:02.0: power state changed by ACPI to D0
[268083.761491] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[268083.777499] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[268083.793745] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[268083.809502] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[268083.857742] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[268083.857797] PM: noirq resume of devices complete after 141.444 msecs
[268083.857898] PM: early resume of devices complete after 0.080 msecs
[268083.857922] i915 0000:00:02.0: setting latency timer to 64
[268083.857932] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[268083.857942] e1000e 0000:00:19.0: setting latency timer to 64
[268083.857951] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[268083.857975] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[268083.858021] ahci 0000:00:1f.2: setting latency timer to 64
[268083.858237] ehci-pci 0000:00:1a.0: setting latency timer to 64
[268083.858355] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[268083.858460] ehci-pci 0000:00:1d.0: setting latency timer to 64
[268083.873060] [drm] Wrong MCH_SSKPD value: 0x16040307
[268083.873061] [drm] This can cause pipe underruns and display issues.
[268083.873062] [drm] Please upgrade your BIOS to fix this.
[268083.905506] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[268084.069663] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[268084.185535] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[268084.186114] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[268084.186116] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[268084.186118] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[268084.187085] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[268084.187087] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[268084.187089] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[268084.187433] ata1.00: configured for UDMA/133
[268084.189540] ata5: SATA link down (SStatus 0 SControl 300)
[268084.193547] ata2: SATA link down (SStatus 0 SControl 300)
[268084.201622] sd 0:0:0:0: [sda] Starting disk
[268084.233652] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[268084.363229] PM: resume of devices complete after 505.242 msecs
[268084.363392] PM: Finishing wakeup.
[268084.363393] Restarting tasks ... done.
[268084.366004] video LNXVIDEO:00: Restoring backlight state
[268084.445649] usb 2-1.1: new low-speed USB device number 38 using ehci-pci
[268084.541055] usb 2-1.1: New USB device found, idVendor=192f, idProduct=0916
[268084.541070] usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[268084.541079] usb 2-1.1: Product: USB Optical Mouse
[268084.545941] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input67
[268084.546632] hid-generic 0003:192F:0916.0034: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[268084.617728] usb 2-1.2: new low-speed USB device number 39 using ehci-pci
[268084.625078] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[268084.720702] usb 2-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[268084.720713] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[268084.720719] usb 2-1.2: Product: USB Keykoard
[268084.720724] usb 2-1.2: Manufacturer: USB
[268084.725365] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input68
[268084.725723] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[268084.726054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[268084.727436] hid-generic 0003:1C4F:0002.0035: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input0
[268084.731158] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[268084.738511] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input69
[268084.738765] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[268084.741715] hid-generic 0003:1C4F:0002.0036: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input1
[268084.787597] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[268085.517722] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[268085.711720] wlan0: authenticate with a0:21:b7:f5:d8:ac
[268085.739062] wlan0: send auth to a0:21:b7:f5:d8:ac (try 1/3)
[268085.746057] wlan0: authenticated
[268085.746214] wlan0: waiting for beacon from a0:21:b7:f5:d8:ac
[268085.761756] wlan0: associate with a0:21:b7:f5:d8:ac (try 1/3)
[268085.764596] wlan0: RX AssocResp from a0:21:b7:f5:d8:ac (capab=0x411 status=0 aid=2)
[268085.767120] wlan0: associated
[268085.767148] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[275080.042050] wlan0: deauthenticating from a0:21:b7:f5:d8:ac by local choice (reason=3)
[275080.060809] cfg80211: Calling CRDA to update world regulatory domain
[275080.067219] cfg80211: World regulatory domain updated:
[275080.067225] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[275080.067228] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[275080.067231] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[275080.067234] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[275080.067236] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[275080.067239] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[275080.605357] PM: Syncing filesystems ... done.
[275080.635840] PM: Preparing system for mem sleep
[275080.636118] Freezing user space processes ... (elapsed 0.001 seconds) done.
[275080.637707] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[275080.639023] PM: Entering mem sleep
[275080.639073] Suspending console(s) (use no_console_suspend to debug)
[275080.834448] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[275080.834534] sd 0:0:0:0: [sda] Stopping disk
[275081.113527] mei_me 0000:00:16.0: suspend
[275081.168614] i915 0000:00:02.0: power state changed by ACPI to D3cold
[275081.328731] PM: suspend of devices complete after 689.455 msecs
[275081.328836] PM: late suspend of devices complete after 0.103 msecs
[275081.344753] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[275081.360582] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[275081.360891] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[275081.376576] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[275081.376656] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[275081.408645] PM: noirq suspend of devices complete after 79.791 msecs
[275081.409316] ACPI: Preparing to enter system sleep state S3
[275081.412705] PM: Saving platform NVS memory
[275081.413545] Disabling non-boot CPUs ...
[275081.414993] smpboot: CPU 1 is now offline
[275081.516599] smpboot: CPU 2 is now offline
[275081.620617] smpboot: CPU 3 is now offline
[275081.621894] ACPI: Low-level resume complete
[275081.621930] PM: Restoring platform NVS memory
[275081.622813] Enabling non-boot CPUs ...
[275081.622848] smpboot: Booting Node 0 Processor 1 APIC 0x1
[275081.633043] Initializing CPU#1
[275081.633786] Disabled fast string operations
[275081.742575] CPU1 is up
[275081.742595] smpboot: Booting Node 0 Processor 2 APIC 0x2
[275081.752839] Initializing CPU#2
[275081.753630] Disabled fast string operations
[275081.834591] CPU2 is up
[275081.834609] smpboot: Booting Node 0 Processor 3 APIC 0x3
[275081.844852] Initializing CPU#3
[275081.845643] Disabled fast string operations
[275081.926605] CPU3 is up
[275081.929819] ACPI: Waking up from system sleep state S3
[275081.996718] i915 0000:00:02.0: power state changed by ACPI to D0
[275082.042567] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[275082.058575] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[275082.074820] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[275082.090580] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[275082.138714] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[275082.138774] PM: noirq resume of devices complete after 142.063 msecs
[275082.138880] PM: early resume of devices complete after 0.085 msecs
[275082.138900] i915 0000:00:02.0: setting latency timer to 64
[275082.138927] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[275082.139009] ehci-pci 0000:00:1a.0: setting latency timer to 64
[275082.139058] ahci 0000:00:1f.2: setting latency timer to 64
[275082.139334] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[275082.139450] ehci-pci 0000:00:1d.0: setting latency timer to 64
[275082.139533] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[275082.139540] e1000e 0000:00:19.0: setting latency timer to 64
[275082.139561] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[275082.152909] [drm] Wrong MCH_SSKPD value: 0x16040307
[275082.152910] [drm] This can cause pipe underruns and display issues.
[275082.152910] [drm] Please upgrade your BIOS to fix this.
[275082.190573] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[275082.350737] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[275082.482618] ata5: SATA link down (SStatus 0 SControl 300)
[275082.482651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[275082.483233] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[275082.483236] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[275082.483237] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[275082.484106] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[275082.484109] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[275082.484110] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[275082.484390] ata1.00: configured for UDMA/133
[275082.498633] ata2: SATA link down (SStatus 0 SControl 300)
[275082.514697] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[275082.514733] sd 0:0:0:0: [sda] Starting disk
[275082.644160] PM: resume of devices complete after 505.192 msecs
[275082.644323] PM: Finishing wakeup.
[275082.644325] Restarting tasks ... done.
[275082.650790] video LNXVIDEO:00: Restoring backlight state
[275083.064771] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[275083.166759] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[275083.166975] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[275083.170203] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[275083.177823] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[275083.211185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[275083.918840] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[275084.173132] wlan0: authenticate with a0:21:b7:f5:d8:ac
[275084.174803] wlan0: send auth to a0:21:b7:f5:d8:ac (try 1/3)
[275084.181130] wlan0: authenticated
[275084.182939] wlan0: associate with a0:21:b7:f5:d8:ac (try 1/3)
[275084.185796] wlan0: RX AssocResp from a0:21:b7:f5:d8:ac (capab=0x411 status=0 aid=3)
[275084.190070] wlan0: associated
[275084.190099] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[277064.563732] type=1400 audit(1385024297.330:154): apparmor="STATUS" operation="profile_replace" parent=15963 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=15967 comm="apparmor_parser"
[277064.563757] type=1400 audit(1385024297.330:155): apparmor="STATUS" operation="profile_replace" parent=15963 profile="unconfined" name="/usr/sbin/cupsd" pid=15967 comm="apparmor_parser"
[277064.565807] type=1400 audit(1385024297.330:156): apparmor="STATUS" operation="profile_replace" parent=15963 profile="unconfined" name="/usr/sbin/cupsd" pid=15967 comm="apparmor_parser"
[277753.611009] type=1400 audit(1385024986.262:157): apparmor="STATUS" operation="profile_replace" parent=17816 profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=17818 comm="apparmor_parser"
[277753.611483] type=1400 audit(1385024986.262:158): apparmor="STATUS" operation="profile_replace" parent=17816 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=17818 comm="apparmor_parser"
[277753.624004] type=1400 audit(1385024986.274:159): apparmor="STATUS" operation="profile_replace" parent=17816 profile="unconfined" name="pxgsettings" pid=17818 comm="apparmor_parser"
[277753.625212] type=1400 audit(1385024986.274:160): apparmor="STATUS" operation="profile_replace" parent=17816 profile="unconfined" name="sanitized_helper" pid=17818 comm="apparmor_parser"
[277753.625857] type=1400 audit(1385024986.274:161): apparmor="STATUS" operation="profile_replace" parent=17816 profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=17818 comm="apparmor_parser"