[ 3021.801570] PM: suspend of drv:scsi dev:host0 complete after 138.763 msecs [ 3021.821773] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 158.647 msecs [ 3021.821891] PM: suspend of drv: dev:pci0000:00 complete after 152.118 msecs [ 3021.821933] PM: suspend of devices complete after 455.930 msecs [ 3021.821936] PM: suspend devices took 0.456 seconds [ 3021.837952] ehci_hcd 0000:00:1d.0: PME# enabled [ 3021.837962] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3021.853791] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 3021.854042] ehci_hcd 0000:00:1a.0: PME# enabled [ 3021.854049] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3021.869895] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 3021.885836] PM: late suspend of devices complete after 63.920 msecs [ 3021.886091] ACPI: Preparing to enter system sleep state S3 [ 3022.057767] PM: Saving platform NVS memory [ 3022.059253] Disabling non-boot CPUs ... [ 3022.161637] CPU 1 is now offline [ 3022.265583] CPU 2 is now offline [ 3022.369556] CPU 3 is now offline [ 3022.369941] Extended CMOS year: 2000 [ 3022.370280] ACPI: Low-level resume complete [ 3022.370352] PM: Restoring platform NVS memory [ 3022.372329] Extended CMOS year: 2000 [ 3022.372459] Enabling non-boot CPUs ... [ 3022.372586] Booting Node 0 Processor 1 APIC 0x1 [ 3022.372587] smpboot cpu 1: start_ip = 99000 [ 3022.382791] Initializing CPU#1 [ 3022.383511] Calibrating delay loop (skipped) already calibrated this CPU [ 3022.383526] Disabled fast string operations [ 3022.403897] NMI watchdog enabled, takes one hw-pmu counter. [ 3022.436096] CPU1 is up [ 3022.436257] Booting Node 0 Processor 2 APIC 0x2 [ 3022.436259] smpboot cpu 2: start_ip = 99000 [ 3022.446436] Initializing CPU#2 [ 3022.447180] Calibrating delay loop (skipped) already calibrated this CPU [ 3022.447192] Disabled fast string operations [ 3022.467631] NMI watchdog enabled, takes one hw-pmu counter. [ 3022.531978] CPU2 is up [ 3022.532249] Booting Node 0 Processor 3 APIC 0x3 [ 3022.532251] smpboot cpu 3: start_ip = 99000 [ 3022.542429] Initializing CPU#3 [ 3022.543172] Calibrating delay loop (skipped) already calibrated this CPU [ 3022.543185] Disabled fast string operations [ 3022.563858] NMI watchdog enabled, takes one hw-pmu counter. [ 3022.600010] CPU3 is up [ 3022.604195] ACPI: Waking up from system sleep state S3 [ 3022.947824] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3022.947835] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 3022.947858] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3022.947873] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [ 3022.947880] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 3022.947903] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 3022.947916] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [ 3022.947925] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 3022.947952] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3022.947969] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [ 3022.947976] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 3022.947999] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3022.948005] ehci_hcd 0000:00:1a.0: PME# disabled [ 3022.948009] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 3022.948013] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 3022.948031] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 3022.948046] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [ 3022.948050] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3022.948056] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 3022.948087] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3022.948097] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 3022.948102] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 3022.948107] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 3022.948115] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3022.948121] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 3022.948157] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 3022.948167] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 3022.948172] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [ 3022.948177] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [ 3022.948186] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3022.948192] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 3022.948234] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 3022.948249] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [ 3022.948254] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [ 3022.948260] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 3022.948271] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3022.948278] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 3022.948318] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 3022.948335] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [ 3022.948342] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 3022.948360] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3022.948364] ehci_hcd 0000:00:1d.0: PME# disabled [ 3022.948367] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 3022.948371] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 3022.948437] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 3022.948524] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 3022.948552] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [ 3022.948561] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 3022.948567] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3022.948576] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 3022.948735] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 3022.948775] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 3022.948891] PM: early resume of devices complete after 1.117 msecs [ 3022.949034] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 3022.949046] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 3022.949056] e1000e 0000:00:19.0: PME# disabled [ 3022.949059] rtlwifi: wireless switch is on [ 3022.949134] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 3022.949162] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 3022.949297] i915 0000:00:02.0: power state changed by ACPI to D0 [ 3022.949348] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 3022.951013] watchdog: only one watchdog can use /dev/watchdog. [ 3022.951015] watchdog: error registering /dev/watchdog (err=-16). [ 3022.951017] mei: unable to register watchdog device. [ 3022.955626] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3022.955638] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 3022.955678] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 3022.955729] ahci 0000:00:1f.2: setting latency timer to 64 [ 3022.955785] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3022.955872] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 3022.955879] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 3022.955883] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3022.955889] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3022.955892] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3022.955900] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3022.955912] sd 0:0:0:0: [sda] Starting disk [ 3022.955924] i915 0000:00:02.0: power state changed by ACPI to D0 [ 3022.955929] i915 0000:00:02.0: setting latency timer to 64 [ 3022.972019] Extended CMOS year: 2000 [ 3023.135695] PM: resume of drv: dev:ep_00 complete after 186.072 msecs [ 3023.135701] PM: resume of drv:hub dev:1-1:1.0 complete after 186.132 msecs [ 3023.135714] PM: resume of drv: dev:ep_81 complete after 186.128 msecs [ 3023.207814] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [ 3023.283577] ata5: SATA link down (SStatus 0 SControl 300) [ 3023.302123] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 3023.302131] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 3023.318026] PM: resume of drv:i915 dev:0000:00:02.0 complete after 369.202 msecs [ 3023.459553] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 3023.459671] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 510.826 msecs [ 3023.551671] PM: resume of drv: dev:ep_00 complete after 601.889 msecs [ 3023.551675] PM: resume of drv:usb dev:1-1.4:1.1 complete after 602.032 msecs [ 3023.551680] PM: resume of drv:usb dev:1-1.4:1.3 complete after 601.922 msecs [ 3023.551686] PM: resume of drv:usb dev:1-1.4:1.2 complete after 601.986 msecs [ 3023.551688] PM: resume of drv: dev:ep_03 complete after 602.010 msecs [ 3023.551695] PM: resume of drv:usb dev:1-1.4:1.0 complete after 602.140 msecs [ 3023.551707] PM: resume of drv: dev:ep_04 complete after 601.968 msecs [ 3023.551712] PM: resume of drv: dev:ep_84 complete after 601.992 msecs [ 3023.551716] PM: resume of drv: dev:ep_83 complete after 602.058 msecs [ 3023.551720] PM: resume of drv: dev:ep_02 complete after 602.100 msecs [ 3023.551722] PM: resume of drv: dev:ep_81 complete after 602.143 msecs [ 3023.551725] PM: resume of drv: dev:ep_82 complete after 602.128 msecs [ 3024.283140] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3024.304293] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3024.304304] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3024.304312] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3024.311299] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3024.311311] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3024.311319] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3024.314526] ata1.00: configured for UDMA/100 [ 3024.356878] PM: resume of drv:sd dev:0:0:0:0 complete after 1407.878 msecs [ 3024.356919] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1385.445 msecs [ 3024.356966] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1407.951 msecs [ 3024.358243] PM: resume of devices complete after 1409.909 msecs [ 3024.358528] PM: resume devices took 1.408 seconds [ 3024.358657] PM: Finishing wakeup. [ 3024.358659] Restarting tasks ... done. [ 3024.392457] video LNXVIDEO:00: Restoring backlight state [ 3024.942981] e1000e 0000:00:19.0: PME# enabled [ 3025.030780] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 3025.030790] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 3025.030798] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 3025.030819] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 3025.030841] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 3025.030892] e1000e 0000:00:19.0: PME# disabled [ 3025.166318] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 3025.218809] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 3025.219024] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3025.222938] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 3025.562167] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3026.765287] e1000e 0000:00:19.0: PME# enabled [ 3028.307943] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 3028.505410] wlan0: authenticate with 68:7f:74:29:a6:56 (try 2) [ 3028.705321] wlan0: authenticate with 68:7f:74:29:a6:56 (try 3) [ 3028.905197] wlan0: authentication with 68:7f:74:29:a6:56 timed out [ 3033.939570] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 3035.144993] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 3035.147140] wlan0: authenticated [ 3035.147294] wlan0: associate with 68:7f:74:29:a6:56 (try 1) [ 3035.151028] wlan0: RX AssocResp from 68:7f:74:29:a6:56 (capab=0x401 status=0 aid=54) [ 3035.151032] wlan0: associated [ 3035.161744] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3046.174024] wlan0: no IPv6 routers present [ 3657.286107] show_signal_msg: 36 callbacks suppressed [ 3657.286119] mc[4077]: segfault at 2 ip 08096b6d sp bfe918c0 error 4 in mc[8048000+de000] [ 4156.980853] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd [ 4157.207167] Initializing USB Mass Storage driver... [ 4157.207468] scsi6 : usb-storage 2-1.2:1.0 [ 4157.207692] usbcore: registered new interface driver usb-storage [ 4157.207698] USB Mass Storage support registered. [ 4158.206634] scsi 6:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2 [ 4158.208745] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 4158.210603] sd 6:0:0:0: [sdb] 15654912 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4158.211619] sd 6:0:0:0: [sdb] Write Protect is off [ 4158.211628] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 4158.212302] sd 6:0:0:0: [sdb] No Caching mode page present [ 4158.212313] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4158.215652] sd 6:0:0:0: [sdb] No Caching mode page present [ 4158.215661] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4159.088134] sdb: sdb1 [ 4159.090520] sd 6:0:0:0: [sdb] No Caching mode page present [ 4159.090525] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4159.090528] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 4260.101734] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 4260.101745] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 4260.101754] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 4260.101780] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4260.101811] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4260.101854] e1000e 0000:00:19.0: PME# disabled [ 4260.101959] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4260.355022] e1000e 0000:00:19.0: PME# enabled [ 4260.657073] wlan0: deauthenticating from 68:7f:74:29:a6:56 by local choice (reason=3) [ 4260.697745] cfg80211: All devices are disconnected, going to restore regulatory settings [ 4260.697763] cfg80211: Restoring regulatory settings [ 4260.698153] cfg80211: Calling CRDA to update world regulatory domain [ 4260.710739] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 4260.710749] cfg80211: World regulatory domain updated: [ 4260.710753] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4260.710760] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4260.710766] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4260.710772] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4260.710778] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4260.710784] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4261.281366] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 4261.281383] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 4261.281397] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 4261.281433] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4261.281476] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4261.281567] e1000e 0000:00:19.0: PME# disabled [ 4262.328494] PM: Syncing filesystems ... done. [ 4262.331235] PM: Preparing system for mem sleep [ 4263.124592] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 4263.140616] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 4263.156610] PM: Entering mem sleep [ 4263.156678] Suspending console(s) (use no_console_suspend to debug) [ 4263.336509] PM: suspend of drv:psmouse dev:serio2 complete after 179.768 msecs [ 4263.336996] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4263.337464] sd 0:0:0:0: [sda] Stopping disk [ 4263.427468] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 4263.440542] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 4263.440551] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 4263.456461] i915 0000:00:02.0: power state changed by ACPI to D3 [ 4263.521758] e1000e 0000:00:19.0: PME# enabled [ 4263.521770] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 4263.528694] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 4263.536383] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 110.063 msecs [ 4263.544389] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.113 msecs [ 4263.587652] PM: suspend of drv:sd dev:0:0:0:0 complete after 250.806 msecs [ 4263.587732] PM: suspend of drv:scsi dev:target0:0:0 complete after 250.793 msecs [ 4263.587775] PM: suspend of drv:scsi dev:host0 complete after 162.016 msecs [ 4263.608369] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 182.402 msecs [ 4263.608448] PM: suspend of drv: dev:pci0000:00 complete after 167.957 msecs [ 4263.608464] PM: suspend of devices complete after 451.874 msecs [ 4263.608467] PM: suspend devices took 0.452 seconds [ 4263.624513] ehci_hcd 0000:00:1d.0: PME# enabled [ 4263.624522] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 4263.640366] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 4263.640616] ehci_hcd 0000:00:1a.0: PME# enabled [ 4263.640623] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 4263.656361] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 4263.672409] PM: late suspend of devices complete after 63.962 msecs [ 4263.672664] ACPI: Preparing to enter system sleep state S3 [ 4263.844340] PM: Saving platform NVS memory [ 4263.845846] Disabling non-boot CPUs ... [ 4263.948205] CPU 1 is now offline [ 4264.052171] CPU 2 is now offline [ 4264.156128] CPU 3 is now offline [ 4264.156541] Extended CMOS year: 2000 [ 4264.156881] ACPI: Low-level resume complete [ 4264.156956] PM: Restoring platform NVS memory [ 4264.158937] Extended CMOS year: 2000 [ 4264.159062] Enabling non-boot CPUs ... [ 4264.159191] Booting Node 0 Processor 1 APIC 0x1 [ 4264.159193] smpboot cpu 1: start_ip = 99000 [ 4264.169396] Initializing CPU#1 [ 4264.170116] Calibrating delay loop (skipped) already calibrated this CPU [ 4264.170130] Disabled fast string operations [ 4264.190539] NMI watchdog enabled, takes one hw-pmu counter. [ 4264.222674] CPU1 is up [ 4264.222834] Booting Node 0 Processor 2 APIC 0x2 [ 4264.222836] smpboot cpu 2: start_ip = 99000 [ 4264.233014] Initializing CPU#2 [ 4264.233757] Calibrating delay loop (skipped) already calibrated this CPU [ 4264.233770] Disabled fast string operations [ 4264.254236] NMI watchdog enabled, takes one hw-pmu counter. [ 4264.318568] CPU2 is up [ 4264.318811] Booting Node 0 Processor 3 APIC 0x3 [ 4264.318813] smpboot cpu 3: start_ip = 99000 [ 4264.328991] Initializing CPU#3 [ 4264.329734] Calibrating delay loop (skipped) already calibrated this CPU [ 4264.329746] Disabled fast string operations [ 4264.350478] NMI watchdog enabled, takes one hw-pmu counter. [ 4264.382591] CPU3 is up [ 4264.386770] ACPI: Waking up from system sleep state S3 [ 4264.730402] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4264.730412] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 4264.730435] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4264.730450] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [ 4264.730457] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 4264.730480] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4264.730493] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [ 4264.730502] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 4264.730529] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4264.730546] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [ 4264.730553] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4264.730576] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 4264.730582] ehci_hcd 0000:00:1a.0: PME# disabled [ 4264.730586] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4264.730590] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4264.730608] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 4264.730623] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [ 4264.730628] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4264.730634] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 4264.730663] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4264.730674] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4264.730679] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 4264.730684] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 4264.730692] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4264.730698] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 4264.730734] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 4264.730745] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4264.730750] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [ 4264.730755] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [ 4264.730763] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4264.730769] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4264.730812] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4264.730826] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [ 4264.730831] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [ 4264.730837] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 4264.730848] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4264.730855] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4264.730895] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4264.730911] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [ 4264.730919] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4264.730936] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 4264.730941] ehci_hcd 0000:00:1d.0: PME# disabled [ 4264.730943] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4264.730948] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4264.731013] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 4264.731101] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 4264.731128] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [ 4264.731137] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 4264.731144] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4264.731153] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4264.731334] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 4264.731374] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 4264.731494] PM: early resume of devices complete after 1.141 msecs [ 4264.731602] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4264.731609] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4264.731618] i915 0000:00:02.0: setting latency timer to 64 [ 4264.731638] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 4264.731664] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 4264.731671] e1000e 0000:00:19.0: PME# disabled [ 4264.731677] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4264.731683] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4264.731697] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4264.731706] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4264.731734] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4264.731751] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4264.731789] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4264.731796] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4264.731809] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4264.731813] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4264.731818] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4264.731831] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 4264.731855] ahci 0000:00:1f.2: setting latency timer to 64 [ 4264.731889] rtlwifi: wireless switch is on [ 4264.732041] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4264.732275] sd 0:0:0:0: [sda] Starting disk [ 4264.733957] watchdog: only one watchdog can use /dev/watchdog. [ 4264.733959] watchdog: error registering /dev/watchdog (err=-16). [ 4264.733960] mei: unable to register watchdog device. [ 4264.833805] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 102.185 msecs [ 4264.910260] PM: resume of drv: dev:ep_00 complete after 177.155 msecs [ 4264.910276] PM: resume of drv:hub dev:2-1:1.0 complete after 177.259 msecs [ 4264.910288] PM: resume of drv:hub dev:1-1:1.0 complete after 177.813 msecs [ 4264.910291] PM: resume of drv: dev:ep_81 complete after 177.215 msecs [ 4264.910296] PM: resume of drv: dev:ep_00 complete after 177.666 msecs [ 4264.910300] PM: resume of drv: dev:ep_81 complete after 177.718 msecs [ 4264.910563] PM: resume of drv: dev:ep_00 complete after 177.064 msecs [ 4264.910590] PM: resume of drv:usb-storage dev:2-1.2:1.0 complete after 177.140 msecs [ 4264.910631] PM: resume of drv: dev:ep_82 complete after 177.148 msecs [ 4264.910635] PM: resume of drv:scsi dev:host6 complete after 177.119 msecs [ 4264.910650] PM: resume of drv: dev:ep_01 complete after 177.185 msecs [ 4264.910653] PM: resume of drv:scsi dev:target6:0:0 complete after 177.060 msecs [ 4264.910667] PM: resume of drv:sd dev:6:0:0:0 complete after 177.059 msecs [ 4264.910677] PM: resume of drv:scsi_host dev:host6 complete after 177.115 msecs [ 4264.910681] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 177.052 msecs [ 4264.982453] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [ 4265.058157] ata5: SATA link down (SStatus 0 SControl 300) [ 4265.076623] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 4265.076631] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 4265.096601] PM: resume of drv:i915 dev:0000:00:02.0 complete after 365.171 msecs [ 4265.237803] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 4265.237919] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 506.238 msecs [ 4265.329114] PM: resume of drv: dev:ep_00 complete after 595.870 msecs [ 4265.329118] PM: resume of drv:usb dev:1-1.4:1.1 complete after 595.982 msecs [ 4265.329122] PM: resume of drv:usb dev:1-1.4:1.3 complete after 595.897 msecs [ 4265.329128] PM: resume of drv:usb dev:1-1.4:1.2 complete after 595.950 msecs [ 4265.329132] PM: resume of drv: dev:ep_83 complete after 595.983 msecs [ 4265.329137] PM: resume of drv: dev:ep_03 complete after 595.975 msecs [ 4265.329145] PM: resume of drv:usb dev:1-1.4:1.0 complete after 596.148 msecs [ 4265.329148] PM: resume of drv: dev:ep_04 complete after 595.938 msecs [ 4265.329151] PM: resume of drv: dev:ep_84 complete after 595.955 msecs [ 4265.329155] PM: resume of drv: dev:ep_81 complete after 596.120 msecs [ 4265.329162] PM: resume of drv: dev:ep_02 complete after 596.065 msecs [ 4265.329167] PM: resume of drv: dev:ep_82 complete after 596.108 msecs [ 4266.121712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4266.125179] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4266.125191] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4266.125199] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4266.132000] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4266.132011] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4266.132019] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4266.135230] ata1.00: configured for UDMA/100 [ 4266.174848] PM: resume of drv:sd dev:0:0:0:0 complete after 1443.164 msecs [ 4266.174899] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1430.619 msecs [ 4266.174922] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1443.106 msecs [ 4266.176246] PM: resume of devices complete after 1445.324 msecs [ 4266.176558] PM: resume devices took 1.444 seconds [ 4266.176689] PM: Finishing wakeup. [ 4266.176691] Restarting tasks ... [ 4266.180798] usb 2-1.2: USB disconnect, device number 3 [ 4266.185995] done. [ 4266.204874] video LNXVIDEO:00: Restoring backlight state [ 4266.699964] e1000e 0000:00:19.0: PME# enabled [ 4266.813391] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 4266.813403] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 4266.813409] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 4266.813433] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4266.813454] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4266.813518] e1000e 0000:00:19.0: PME# disabled [ 4266.937509] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4266.993328] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4266.993598] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4266.997857] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 4267.334013] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4267.527892] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 4268.533215] e1000e 0000:00:19.0: PME# enabled [ 4270.511902] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 4270.516951] wlan0: authenticated [ 4270.517171] wlan0: associate with 68:7f:74:29:a6:56 (try 1) [ 4270.522855] wlan0: RX AssocResp from 68:7f:74:29:a6:56 (capab=0x401 status=0 aid=44) [ 4270.522860] wlan0: associated [ 4270.533560] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4280.751595] wlan0: no IPv6 routers present [ 4680.877352] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 4680.877359] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 4680.877366] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 4680.877383] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4680.877401] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4680.877433] e1000e 0000:00:19.0: PME# disabled [ 4680.877499] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4681.133298] e1000e 0000:00:19.0: PME# enabled [ 4681.435848] wlan0: deauthenticating from 68:7f:74:29:a6:56 by local choice (reason=3) [ 4681.481432] cfg80211: All devices are disconnected, going to restore regulatory settings [ 4681.481438] cfg80211: Restoring regulatory settings [ 4681.481444] cfg80211: Calling CRDA to update world regulatory domain [ 4681.620099] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 4681.620104] cfg80211: World regulatory domain updated: [ 4681.620107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4681.620113] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4681.620117] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4681.620120] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4681.620123] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4681.620127] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4682.232873] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 4682.232890] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 4682.232903] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 4682.232939] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4682.232983] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4682.233079] e1000e 0000:00:19.0: PME# disabled [ 4683.693659] PM: Syncing filesystems ... done. [ 4683.697878] PM: Preparing system for mem sleep [ 4684.696004] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 4684.711916] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 4684.727915] PM: Entering mem sleep [ 4684.727990] Suspending console(s) (use no_console_suspend to debug) [ 4684.908714] PM: suspend of drv:psmouse dev:serio2 complete after 180.679 msecs [ 4684.909099] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4684.909806] sd 0:0:0:0: [sda] Stopping disk [ 4684.999912] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 4685.011627] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 4685.015756] i915 0000:00:02.0: power state changed by ACPI to D3 [ 4685.015899] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 4685.094402] e1000e 0000:00:19.0: PME# enabled [ 4685.094414] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 4685.100087] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 4685.107625] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 108.920 msecs [ 4685.115673] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.011 msecs [ 4685.157728] PM: suspend of drv:sd dev:0:0:0:0 complete after 248.824 msecs [ 4685.157806] PM: suspend of drv:scsi dev:target0:0:0 complete after 248.765 msecs [ 4685.157875] PM: suspend of drv:scsi dev:host0 complete after 159.645 msecs [ 4685.179757] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 181.229 msecs [ 4685.179802] PM: suspend of drv: dev:pci0000:00 complete after 179.872 msecs [ 4685.179845] PM: suspend of devices complete after 451.947 msecs [ 4685.179848] PM: suspend devices took 0.452 seconds [ 4685.195896] ehci_hcd 0000:00:1d.0: PME# enabled [ 4685.195905] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 4685.211647] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 4685.211899] ehci_hcd 0000:00:1a.0: PME# enabled [ 4685.211906] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 4685.227647] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 4685.243697] PM: late suspend of devices complete after 63.869 msecs [ 4685.243952] ACPI: Preparing to enter system sleep state S3 [ 4685.415628] PM: Saving platform NVS memory [ 4685.417135] Disabling non-boot CPUs ... [ 4685.519495] CPU 1 is now offline [ 4685.623454] CPU 2 is now offline [ 4685.727415] CPU 3 is now offline [ 4685.727803] Extended CMOS year: 2000 [ 4685.728139] ACPI: Low-level resume complete [ 4685.728179] PM: Restoring platform NVS memory [ 4685.729101] Extended CMOS year: 2000 [ 4685.729138] Enabling non-boot CPUs ... [ 4685.729246] Booting Node 0 Processor 1 APIC 0x1 [ 4685.729247] smpboot cpu 1: start_ip = 99000 [ 4685.739466] Initializing CPU#1 [ 4685.740171] Calibrating delay loop (skipped) already calibrated this CPU [ 4685.740185] Disabled fast string operations [ 4685.760483] NMI watchdog enabled, takes one hw-pmu counter. [ 4685.808779] CPU1 is up [ 4685.808879] Booting Node 0 Processor 2 APIC 0x2 [ 4685.808881] smpboot cpu 2: start_ip = 99000 [ 4685.819059] Initializing CPU#2 [ 4685.819803] Calibrating delay loop (skipped) already calibrated this CPU [ 4685.819815] Disabled fast string operations [ 4685.840212] NMI watchdog enabled, takes one hw-pmu counter. [ 4685.884751] CPU2 is up [ 4685.884844] Booting Node 0 Processor 3 APIC 0x3 [ 4685.884846] smpboot cpu 3: start_ip = 99000 [ 4685.895023] Initializing CPU#3 [ 4685.895766] Calibrating delay loop (skipped) already calibrated this CPU [ 4685.895778] Disabled fast string operations [ 4685.916302] NMI watchdog enabled, takes one hw-pmu counter. [ 4685.964832] CPU3 is up [ 4685.969027] ACPI: Waking up from system sleep state S3 [ 4686.164770] thinkpad_acpi: EC reports that Thermal Table has changed [ 4686.364564] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4686.364575] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 4686.364598] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4686.364613] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [ 4686.364620] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 4686.364644] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4686.364656] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [ 4686.364665] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 4686.364692] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4686.364709] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [ 4686.364716] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4686.364739] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 4686.364745] ehci_hcd 0000:00:1a.0: PME# disabled [ 4686.364749] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4686.364753] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4686.364772] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 4686.364786] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [ 4686.364791] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4686.364797] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 4686.364828] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4686.364838] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4686.364843] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 4686.364848] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 4686.364856] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4686.364862] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 4686.364898] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 4686.364909] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4686.364914] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [ 4686.364919] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [ 4686.364927] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4686.364933] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4686.364975] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4686.364989] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [ 4686.364995] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [ 4686.365001] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 4686.365012] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4686.365020] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4686.365059] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4686.365076] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [ 4686.365083] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4686.365101] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 4686.365106] ehci_hcd 0000:00:1d.0: PME# disabled [ 4686.365108] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4686.365113] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4686.365179] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 4686.365266] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 4686.365293] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [ 4686.365302] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 4686.365309] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4686.365318] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4686.365571] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 4686.365612] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 4686.365727] PM: early resume of devices complete after 1.212 msecs [ 4686.365828] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4686.365864] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 4686.365869] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4686.365880] i915 0000:00:02.0: setting latency timer to 64 [ 4686.365919] rtlwifi: wireless switch is on [ 4686.365934] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4686.365941] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 4686.365946] e1000e 0000:00:19.0: PME# disabled [ 4686.366094] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4686.366111] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4686.366117] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4686.366166] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 4686.366284] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 4686.366622] ahci 0000:00:1f.2: setting latency timer to 64 [ 4686.366730] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4686.366735] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4686.366740] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4686.366747] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4686.366751] sd 0:0:0:0: [sda] Starting disk [ 4686.366784] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4686.366791] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4686.366797] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4686.368074] watchdog: only one watchdog can use /dev/watchdog. [ 4686.368076] watchdog: error registering /dev/watchdog (err=-16). [ 4686.368077] mei: unable to register watchdog device. [ 4686.382430] Extended CMOS year: 2000 [ 4686.544420] PM: resume of drv: dev:ep_00 complete after 177.801 msecs [ 4686.544458] PM: resume of drv:hub dev:1-1:1.0 complete after 177.869 msecs [ 4686.544474] PM: resume of drv: dev:ep_81 complete after 177.868 msecs [ 4686.616381] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [ 4686.617807] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 252.053 msecs [ 4686.692318] ata5: SATA link down (SStatus 0 SControl 300) [ 4686.710734] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 4686.710743] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 4686.730770] PM: resume of drv:i915 dev:0000:00:02.0 complete after 365.111 msecs [ 4686.868407] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 4686.868470] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.766 msecs [ 4686.960398] PM: resume of drv:usb dev:1-1.4:1.0 complete after 593.899 msecs [ 4686.960409] PM: resume of drv:usb dev:1-1.4:1.2 complete after 593.848 msecs [ 4686.960412] PM: resume of drv: dev:ep_81 complete after 593.913 msecs [ 4686.960418] PM: resume of drv: dev:ep_82 complete after 593.916 msecs [ 4686.960420] PM: resume of drv: dev:ep_04 complete after 593.810 msecs [ 4686.960425] PM: resume of drv: dev:ep_84 complete after 593.854 msecs [ 4686.960429] PM: resume of drv: dev:ep_02 complete after 593.920 msecs [ 4686.960433] PM: resume of drv:usb dev:1-1.4:1.1 complete after 593.917 msecs [ 4686.960437] PM: resume of drv:usb dev:1-1.4:1.3 complete after 593.796 msecs [ 4686.960447] PM: resume of drv: dev:ep_83 complete after 593.926 msecs [ 4686.960451] PM: resume of drv: dev:ep_00 complete after 593.802 msecs [ 4686.960455] PM: resume of drv: dev:ep_03 complete after 593.926 msecs [ 4687.691900] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4687.695239] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4687.695250] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4687.695258] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4687.702128] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4687.702139] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4687.702147] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4687.705338] ata1.00: configured for UDMA/100 [ 4687.750401] PM: resume of drv:sd dev:0:0:0:0 complete after 1384.390 msecs [ 4687.750437] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1384.384 msecs [ 4687.750481] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1368.599 msecs [ 4687.751962] PM: resume of devices complete after 1386.781 msecs [ 4687.752278] PM: resume devices took 1.388 seconds [ 4687.752455] PM: Finishing wakeup. [ 4687.752457] Restarting tasks ... done. [ 4687.781413] video LNXVIDEO:00: Restoring backlight state [ 4688.647910] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 4688.703525] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 4688.703922] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4688.708463] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 4689.044676] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4691.760617] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 4691.958136] wlan0: authenticate with 68:7f:74:29:a6:56 (try 2) [ 4692.158056] wlan0: authenticate with 68:7f:74:29:a6:56 (try 3) [ 4692.357916] wlan0: authentication with 68:7f:74:29:a6:56 timed out [ 4697.404168] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 4698.705541] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 4698.709677] wlan0: authenticated [ 4698.710098] wlan0: associate with 68:7f:74:29:a6:56 (try 1) [ 4698.736479] wlan0: RX AssocResp from 68:7f:74:29:a6:56 (capab=0x401 status=0 aid=66) [ 4698.736490] wlan0: associated [ 4698.747374] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4709.334857] wlan0: no IPv6 routers present [ 4785.996962] wlan0: deauthenticating from 68:7f:74:29:a6:56 by local choice (reason=3) [ 4786.015790] cfg80211: All devices are disconnected, going to restore regulatory settings [ 4786.015805] cfg80211: Restoring regulatory settings [ 4786.015831] cfg80211: Calling CRDA to update world regulatory domain [ 4786.028848] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 4786.028858] cfg80211: World regulatory domain updated: [ 4786.028862] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4786.028870] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4786.028876] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4786.028882] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4786.028888] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4786.028894] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4787.592317] PM: Syncing filesystems ... done. [ 4787.595204] PM: Preparing system for mem sleep [ 4788.418167] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 4788.434123] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 4788.450123] PM: Entering mem sleep [ 4788.450198] Suspending console(s) (use no_console_suspend to debug) [ 4788.647123] PM: suspend of drv:psmouse dev:serio2 complete after 196.884 msecs [ 4788.647330] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4788.647629] sd 0:0:0:0: [sda] Stopping disk [ 4788.738000] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 4788.753830] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 4788.753956] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 4788.753975] i915 0000:00:02.0: power state changed by ACPI to D3 [ 4788.834155] e1000e 0000:00:19.0: PME# enabled [ 4788.834167] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 4788.842343] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 4788.849822] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 111.801 msecs [ 4788.857892] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.967 msecs [ 4788.948725] PM: suspend of drv:sd dev:0:0:0:0 complete after 301.518 msecs [ 4788.948808] PM: suspend of drv:scsi dev:target0:0:0 complete after 301.606 msecs [ 4788.948858] PM: suspend of drv:scsi dev:host0 complete after 212.594 msecs [ 4788.969844] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 233.287 msecs [ 4788.969929] PM: suspend of drv: dev:pci0000:00 complete after 231.566 msecs [ 4788.969943] PM: suspend of devices complete after 519.865 msecs [ 4788.969946] PM: suspend devices took 0.520 seconds [ 4788.985996] ehci_hcd 0000:00:1d.0: PME# enabled [ 4788.986006] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 4789.001841] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 4789.002093] ehci_hcd 0000:00:1a.0: PME# enabled [ 4789.002101] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 4789.017835] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 4789.033886] PM: late suspend of devices complete after 63.959 msecs [ 4789.034141] ACPI: Preparing to enter system sleep state S3 [ 4789.205817] PM: Saving platform NVS memory [ 4789.207332] Disabling non-boot CPUs ... [ 4789.309688] CPU 1 is now offline [ 4789.413642] CPU 2 is now offline [ 4789.517602] CPU 3 is now offline [ 4789.517992] Extended CMOS year: 2000 [ 4789.518327] ACPI: Low-level resume complete [ 4789.518368] PM: Restoring platform NVS memory [ 4789.519289] Extended CMOS year: 2000 [ 4789.519326] Enabling non-boot CPUs ... [ 4789.519429] Booting Node 0 Processor 1 APIC 0x1 [ 4789.519430] smpboot cpu 1: start_ip = 99000 [ 4789.529638] Initializing CPU#1 [ 4789.530353] Calibrating delay loop (skipped) already calibrated this CPU [ 4789.530367] Disabled fast string operations [ 4789.550667] NMI watchdog enabled, takes one hw-pmu counter. [ 4789.598972] CPU1 is up [ 4789.599071] Booting Node 0 Processor 2 APIC 0x2 [ 4789.599073] smpboot cpu 2: start_ip = 99000 [ 4789.609251] Initializing CPU#2 [ 4789.609995] Calibrating delay loop (skipped) already calibrated this CPU [ 4789.610008] Disabled fast string operations [ 4789.630438] NMI watchdog enabled, takes one hw-pmu counter. [ 4789.674940] CPU2 is up [ 4789.675035] Booting Node 0 Processor 3 APIC 0x3 [ 4789.675037] smpboot cpu 3: start_ip = 99000 [ 4789.685214] Initializing CPU#3 [ 4789.685957] Calibrating delay loop (skipped) already calibrated this CPU [ 4789.685969] Disabled fast string operations [ 4789.706494] NMI watchdog enabled, takes one hw-pmu counter. [ 4789.755012] CPU3 is up [ 4789.759220] ACPI: Waking up from system sleep state S3 [ 4790.102775] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4790.102786] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 4790.102809] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4790.102825] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [ 4790.102832] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 4790.102855] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4790.102868] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [ 4790.102877] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 4790.102904] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4790.102921] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [ 4790.102929] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4790.102951] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 4790.102957] ehci_hcd 0000:00:1a.0: PME# disabled [ 4790.102961] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4790.102966] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4790.102984] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 4790.102999] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [ 4790.103004] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4790.103010] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 4790.103041] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4790.103051] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4790.103056] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 4790.103061] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 4790.103070] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4790.103076] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 4790.103111] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 4790.103122] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4790.103127] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [ 4790.103132] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [ 4790.103140] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4790.103147] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4790.103189] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4790.103204] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [ 4790.103209] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [ 4790.103215] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 4790.103226] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 4790.103234] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4790.103273] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 4790.103290] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [ 4790.103298] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 4790.103315] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 4790.103320] ehci_hcd 0000:00:1d.0: PME# disabled [ 4790.103323] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4790.103327] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4790.103392] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 4790.103480] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 4790.103508] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [ 4790.103517] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 4790.103524] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 4790.103533] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 4790.103790] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 4790.103830] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 4790.103944] PM: early resume of devices complete after 1.218 msecs [ 4790.104020] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4790.104025] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4790.104030] i915 0000:00:02.0: setting latency timer to 64 [ 4790.104044] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 4790.104056] e1000e 0000:00:19.0: PME# disabled [ 4790.104060] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4790.104072] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4790.104089] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4790.104104] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4790.104126] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 4790.104143] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4790.104157] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4790.104240] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4790.104245] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4790.104247] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 4790.104252] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4790.104267] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4790.104272] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4790.104299] ahci 0000:00:1f.2: setting latency timer to 64 [ 4790.104311] rtlwifi: wireless switch is on [ 4790.104500] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4790.104685] sd 0:0:0:0: [sda] Starting disk [ 4790.106011] watchdog: only one watchdog can use /dev/watchdog. [ 4790.106014] watchdog: error registering /dev/watchdog (err=-16). [ 4790.106016] mei: unable to register watchdog device. [ 4790.282636] PM: resume of drv:hub dev:1-1:1.0 complete after 177.970 msecs [ 4790.282659] PM: resume of drv: dev:ep_00 complete after 177.988 msecs [ 4790.282676] PM: resume of drv: dev:ep_81 complete after 178.011 msecs [ 4790.354614] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [ 4790.358319] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 254.384 msecs [ 4790.430537] ata5: SATA link down (SStatus 0 SControl 300) [ 4790.449112] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 4790.449120] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 4790.472974] PM: resume of drv:i915 dev:0000:00:02.0 complete after 369.124 msecs [ 4790.606482] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 4790.606543] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.431 msecs [ 4790.698662] PM: resume of drv:usb dev:1-1.4:1.1 complete after 593.953 msecs [ 4790.698666] PM: resume of drv:usb dev:1-1.4:1.3 complete after 593.920 msecs [ 4790.698674] PM: resume of drv: dev:ep_83 complete after 593.962 msecs [ 4790.698676] PM: resume of drv: dev:ep_00 complete after 593.929 msecs [ 4790.698687] PM: resume of drv:usb dev:1-1.4:1.0 complete after 594.003 msecs [ 4790.698691] PM: resume of drv:usb dev:1-1.4:1.2 complete after 593.957 msecs [ 4790.698695] PM: resume of drv: dev:ep_03 complete after 593.976 msecs [ 4790.698702] PM: resume of drv: dev:ep_81 complete after 594.013 msecs [ 4790.698714] PM: resume of drv: dev:ep_02 complete after 594.015 msecs [ 4790.698717] PM: resume of drv: dev:ep_84 complete after 593.981 msecs [ 4790.698720] PM: resume of drv: dev:ep_04 complete after 593.983 msecs [ 4790.698727] PM: resume of drv: dev:ep_82 complete after 594.036 msecs [ 4791.430101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4791.452926] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4791.452937] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4791.452945] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4791.459872] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 4791.459883] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 4791.459891] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 4791.463066] ata1.00: configured for UDMA/100 [ 4791.516394] PM: resume of drv:sd dev:0:0:0:0 complete after 1412.287 msecs [ 4791.516461] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1412.330 msecs [ 4791.516465] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1397.028 msecs [ 4791.517743] PM: resume of devices complete after 1414.357 msecs [ 4791.518031] PM: resume devices took 1.416 seconds [ 4791.518161] PM: Finishing wakeup. [ 4791.518163] Restarting tasks ... done. [ 4791.549420] video LNXVIDEO:00: Restoring backlight state [ 4792.253906] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4792.309713] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4792.309925] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4792.313830] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 4792.653010] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4795.356775] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 4795.367333] wlan0: authenticated [ 4795.367528] wlan0: associate with 68:7f:74:29:a6:56 (try 1) [ 4795.373074] wlan0: RX AssocResp from 68:7f:74:29:a6:56 (capab=0x401 status=0 aid=61) [ 4795.373077] wlan0: associated [ 4795.383641] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4805.424201] wlan0: no IPv6 routers present [ 5403.300197] wlan0: deauthenticated from 68:7f:74:29:a6:56 (Reason: 7) [ 5403.428286] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5403.428300] cfg80211: Restoring regulatory settings [ 5403.428308] cfg80211: Calling CRDA to update world regulatory domain [ 5403.438992] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5403.439001] cfg80211: World regulatory domain updated: [ 5403.439006] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5403.439013] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5403.439020] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5403.439026] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5403.439032] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5403.439038] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5403.531163] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 5404.725835] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 5404.734228] wlan0: authenticated [ 5404.734609] wlan0: associate with 68:7f:74:29:a6:56 (try 1) [ 5404.747467] wlan0: RX ReassocResp from 68:7f:74:29:a6:56 (capab=0x401 status=0 aid=23) [ 5404.747471] wlan0: associated [ 6654.478799] wlan0: deauthenticated from 68:7f:74:29:a6:56 (Reason: 7) [ 6654.568437] cfg80211: All devices are disconnected, going to restore regulatory settings [ 6654.568444] cfg80211: Restoring regulatory settings [ 6654.568449] cfg80211: Calling CRDA to update world regulatory domain [ 6654.574411] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 6654.574416] cfg80211: World regulatory domain updated: [ 6654.574419] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6654.574423] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6654.574427] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6654.574430] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6654.574434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6654.574437] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6654.698843] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 6655.866011] wlan0: authenticate with 68:7f:74:29:a6:56 (try 1) [ 6655.868677] wlan0: authenticated [ 6655.869532] wlan0: associate with 68:7f:74:29:a6:56 (try 1) [ 6655.881041] wlan0: RX ReassocResp from 68:7f:74:29:a6:56 (capab=0x401 status=0 aid=6) [ 6655.881051] wlan0: associated [ 6824.256805] wlan0: deauthenticating from 68:7f:74:29:a6:56 by local choice (reason=3) [ 6824.289898] cfg80211: All devices are disconnected, going to restore regulatory settings [ 6824.289913] cfg80211: Restoring regulatory settings [ 6824.289931] cfg80211: Calling CRDA to update world regulatory domain [ 6824.296693] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 6824.296703] cfg80211: World regulatory domain updated: [ 6824.296706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6824.296709] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6824.296713] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6824.296716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6824.296719] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6824.296722] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6825.862962] PM: Syncing filesystems ... done. [ 6825.865711] PM: Preparing system for mem sleep [ 6826.672723] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 6826.688758] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 6826.704758] PM: Entering mem sleep [ 6826.704833] Suspending console(s) (use no_console_suspend to debug) [ 6826.892068] PM: suspend of drv:psmouse dev:serio2 complete after 187.190 msecs [ 6826.892345] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6826.892753] sd 0:0:0:0: [sda] Stopping disk [ 6826.982262] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 6826.996567] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 6826.996571] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 6827.000602] i915 0000:00:02.0: power state changed by ACPI to D3 [ 6827.078113] e1000e 0000:00:19.0: PME# enabled [ 6827.078125] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 6827.084905] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 6827.092520] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 111.271 msecs [ 6827.100520] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.315 msecs [ 6827.141421] PM: suspend of drv:sd dev:0:0:0:0 complete after 249.176 msecs [ 6827.141524] PM: suspend of drv:scsi dev:target0:0:0 complete after 249.196 msecs [ 6827.141538] PM: suspend of drv:scsi dev:host0 complete after 160.654 msecs [ 6827.164493] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 183.449 msecs [ 6827.164591] PM: suspend of drv: dev:pci0000:00 complete after 176.139 msecs [ 6827.164605] PM: suspend of devices complete after 459.867 msecs [ 6827.164609] PM: suspend devices took 0.460 seconds [ 6827.180646] ehci_hcd 0000:00:1d.0: PME# enabled [ 6827.180655] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 6827.196501] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 6827.196753] ehci_hcd 0000:00:1a.0: PME# enabled [ 6827.196760] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 6827.212496] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 6827.228545] PM: late suspend of devices complete after 63.956 msecs [ 6827.228801] ACPI: Preparing to enter system sleep state S3 [ 6827.400477] PM: Saving platform NVS memory [ 6827.402018] Disabling non-boot CPUs ... [ 6827.504342] CPU 1 is now offline [ 6827.608301] CPU 2 is now offline [ 6827.712266] CPU 3 is now offline [ 6827.712665] Extended CMOS year: 2000 [ 6827.713004] ACPI: Low-level resume complete [ 6827.713080] PM: Restoring platform NVS memory [ 6827.715064] Extended CMOS year: 2000 [ 6827.715194] Enabling non-boot CPUs ... [ 6827.715322] Booting Node 0 Processor 1 APIC 0x1 [ 6827.715324] smpboot cpu 1: start_ip = 99000 [ 6827.725537] Initializing CPU#1 [ 6827.726247] Calibrating delay loop (skipped) already calibrated this CPU [ 6827.726261] Disabled fast string operations [ 6827.746673] NMI watchdog enabled, takes one hw-pmu counter. [ 6827.778817] CPU1 is up [ 6827.778978] Booting Node 0 Processor 2 APIC 0x2 [ 6827.778981] smpboot cpu 2: start_ip = 99000 [ 6827.789158] Initializing CPU#2 [ 6827.789902] Calibrating delay loop (skipped) already calibrated this CPU [ 6827.789914] Disabled fast string operations [ 6827.810385] NMI watchdog enabled, takes one hw-pmu counter. [ 6827.874703] CPU2 is up [ 6827.874947] Booting Node 0 Processor 3 APIC 0x3 [ 6827.874949] smpboot cpu 3: start_ip = 99000 [ 6827.885128] Initializing CPU#3 [ 6827.885871] Calibrating delay loop (skipped) already calibrated this CPU [ 6827.885883] Disabled fast string operations [ 6827.906555] NMI watchdog enabled, takes one hw-pmu counter. [ 6827.938778] CPU3 is up [ 6827.943001] ACPI: Waking up from system sleep state S3 [ 6828.138703] thinkpad_acpi: EC reports that Thermal Table has changed [ 6828.338525] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 6828.338536] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 6828.338559] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 6828.338574] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [ 6828.338582] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 6828.338605] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 6828.338618] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [ 6828.338627] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 6828.338654] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 6828.338671] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [ 6828.338678] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 6828.338701] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 6828.338707] ehci_hcd 0000:00:1a.0: PME# disabled [ 6828.338711] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 6828.338715] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 6828.338733] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 6828.338748] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [ 6828.338753] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6828.338759] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 6828.338790] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 6828.338800] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 6828.338805] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 6828.338810] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 6828.338819] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 6828.338825] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 6828.338860] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 6828.338871] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 6828.338876] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [ 6828.338881] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [ 6828.338889] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 6828.338896] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 6828.338938] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 6828.338952] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [ 6828.338959] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [ 6828.338964] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 6828.338975] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 6828.338983] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 6828.339023] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 6828.339040] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [ 6828.339048] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 6828.339066] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 6828.339070] ehci_hcd 0000:00:1d.0: PME# disabled [ 6828.339073] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6828.339077] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6828.339143] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 6828.339231] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 6828.339258] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [ 6828.339267] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 6828.339274] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6828.339283] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 6828.339518] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 6828.339558] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 6828.339675] PM: early resume of devices complete after 1.199 msecs [ 6828.339775] i915 0000:00:02.0: power state changed by ACPI to D0 [ 6828.339781] i915 0000:00:02.0: power state changed by ACPI to D0 [ 6828.339792] i915 0000:00:02.0: setting latency timer to 64 [ 6828.339825] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 6828.339847] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 6828.339852] e1000e 0000:00:19.0: PME# disabled [ 6828.339922] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 6828.339984] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 6828.339989] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 6828.339998] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6828.340006] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6828.340031] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6828.340037] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6828.340084] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6828.340130] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6828.340135] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6828.340142] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6828.340148] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6828.340175] ahci 0000:00:1f.2: setting latency timer to 64 [ 6828.340218] rtlwifi: wireless switch is on [ 6828.340418] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6828.340586] sd 0:0:0:0: [sda] Starting disk [ 6828.342272] watchdog: only one watchdog can use /dev/watchdog. [ 6828.342274] watchdog: error registering /dev/watchdog (err=-16). [ 6828.342276] mei: unable to register watchdog device. [ 6828.442742] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 102.940 msecs [ 6828.518367] PM: resume of drv: dev:ep_00 complete after 177.694 msecs [ 6828.518393] PM: resume of drv:hub dev:1-1:1.0 complete after 177.775 msecs [ 6828.518403] PM: resume of drv: dev:ep_81 complete after 177.800 msecs [ 6828.590439] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [ 6828.666280] ata5: SATA link down (SStatus 0 SControl 300) [ 6828.684827] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 6828.684835] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 6828.708724] PM: resume of drv:i915 dev:0000:00:02.0 complete after 369.119 msecs [ 6828.842321] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 6828.842422] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.406 msecs [ 6828.934350] PM: resume of drv:usb dev:1-1.4:1.0 complete after 593.731 msecs [ 6828.934363] PM: resume of drv:usb dev:1-1.4:1.2 complete after 593.528 msecs [ 6828.934369] PM: resume of drv:usb dev:1-1.4:1.3 complete after 593.397 msecs [ 6828.934373] PM: resume of drv: dev:ep_04 complete after 593.475 msecs [ 6828.934378] PM: resume of drv: dev:ep_00 complete after 593.374 msecs [ 6828.934383] PM: resume of drv:usb dev:1-1.4:1.1 complete after 593.628 msecs [ 6828.934387] PM: resume of drv: dev:ep_81 complete after 593.741 msecs [ 6828.934390] PM: resume of drv: dev:ep_02 complete after 593.655 msecs [ 6828.934394] PM: resume of drv: dev:ep_84 complete after 593.525 msecs [ 6828.934398] PM: resume of drv: dev:ep_82 complete after 593.743 msecs [ 6828.934401] PM: resume of drv: dev:ep_83 complete after 593.631 msecs [ 6828.934405] PM: resume of drv: dev:ep_03 complete after 593.619 msecs [ 6829.665857] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6829.669282] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 6829.669294] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6829.669302] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 6829.676289] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 6829.676301] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6829.676309] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 6829.679448] ata1.00: configured for UDMA/100 [ 6829.718690] PM: resume of drv:sd dev:0:0:0:0 complete after 1378.669 msecs [ 6829.718740] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1364.004 msecs [ 6829.718762] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1378.726 msecs [ 6829.720069] PM: resume of devices complete after 1380.939 msecs [ 6829.720378] PM: resume devices took 1.380 seconds [ 6829.720527] PM: Finishing wakeup. [ 6829.720529] Restarting tasks ... done. [ 6829.766027] video LNXVIDEO:00: Restoring backlight state [ 6830.326578] e1000e 0000:00:19.0: PME# enabled [ 6830.401491] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 6830.401501] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 6830.401509] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 6830.401528] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 6830.401551] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 6830.401604] e1000e 0000:00:19.0: PME# disabled [ 6830.527410] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 6830.581463] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 6830.581732] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6830.585833] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 6830.921794] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6831.056699] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 6832.115594] e1000e 0000:00:19.0: PME# enabled [ 6834.031701] wlan0: authenticate with 00:3a:99:c2:1e:b0 (try 1) [ 6834.227969] wlan0: authenticate with 00:3a:99:c2:1e:b0 (try 2) [ 6834.427852] wlan0: authenticate with 00:3a:99:c2:1e:b0 (try 3) [ 6834.627832] wlan0: authentication with 00:3a:99:c2:1e:b0 timed out [ 6839.672914] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 6840.887351] wlan0: authenticate with 00:24:c3:f8:b4:00 (try 1) [ 6840.889894] wlan0: authenticated [ 6840.910264] wlan0: associate with 00:24:c3:f8:b4:00 (try 1) [ 6840.913294] wlan0: RX AssocResp from 00:24:c3:f8:b4:00 (capab=0x21 status=0 aid=2) [ 6840.913298] wlan0: associated [ 6840.913860] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 9412.837269] cfg80211: All devices are disconnected, going to restore regulatory settings [ 9412.837285] cfg80211: Restoring regulatory settings [ 9412.837295] cfg80211: Calling CRDA to update world regulatory domain [ 9412.909778] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 9412.909784] cfg80211: World regulatory domain updated: [ 9412.909787] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9412.909791] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9412.909795] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9412.909799] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9412.909803] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9412.909806] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9412.940555] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 9414.138720] wlan0: authenticate with 00:24:c3:f8:b4:00 (try 1) [ 9414.148161] wlan0: authenticated [ 9414.148720] wlan0: associate with 00:24:c3:f8:b4:00 (try 1) [ 9414.153438] wlan0: RX ReassocResp from 00:24:c3:f8:b4:00 (capab=0x21 status=0 aid=2) [ 9414.153448] wlan0: associated [ 9610.826522] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 9610.826534] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 9610.826543] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 9610.826568] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 9610.826597] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9610.826640] e1000e 0000:00:19.0: PME# disabled [ 9610.826748] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 9611.078258] e1000e 0000:00:19.0: PME# enabled [ 9611.370051] wlan0: deauthenticating from 00:24:c3:f8:b4:00 by local choice (reason=3) [ 9611.431156] cfg80211: All devices are disconnected, going to restore regulatory settings [ 9611.431171] cfg80211: Restoring regulatory settings [ 9611.431203] cfg80211: Calling CRDA to update world regulatory domain [ 9611.442935] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 9611.442939] cfg80211: World regulatory domain updated: [ 9611.442941] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9611.442943] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9611.442946] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9611.442948] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9611.442951] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9611.442953] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9612.401961] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 9612.401979] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 9612.401993] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 9612.402030] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 9612.402073] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9612.402169] e1000e 0000:00:19.0: PME# disabled [ 9613.955796] PM: Syncing filesystems ... done. [ 9613.963037] PM: Preparing system for mem sleep [ 9614.721131] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 9614.737048] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 9614.753041] PM: Entering mem sleep [ 9614.753120] Suspending console(s) (use no_console_suspend to debug) [ 9614.934369] PM: suspend of drv:psmouse dev:serio2 complete after 181.203 msecs [ 9614.934978] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9614.935361] sd 0:0:0:0: [sda] Stopping disk [ 9615.025064] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 9615.036761] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 9615.040869] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 9615.040906] i915 0000:00:02.0: power state changed by ACPI to D3 [ 9615.117064] e1000e 0000:00:19.0: PME# enabled [ 9615.117078] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 9615.125185] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 9615.132821] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 108.735 msecs [ 9615.140809] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 116.772 msecs [ 9615.189503] PM: suspend of drv:sd dev:0:0:0:0 complete after 254.627 msecs [ 9615.189604] PM: suspend of drv:scsi dev:target0:0:0 complete after 254.631 msecs [ 9615.189677] PM: suspend of drv:scsi dev:host0 complete after 166.074 msecs [ 9615.212772] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 188.857 msecs [ 9615.212865] PM: suspend of drv: dev:pci0000:00 complete after 187.838 msecs [ 9615.212910] PM: suspend of devices complete after 459.887 msecs [ 9615.212913] PM: suspend devices took 0.460 seconds [ 9615.228932] ehci_hcd 0000:00:1d.0: PME# enabled [ 9615.228941] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 9615.244787] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 9615.245040] ehci_hcd 0000:00:1a.0: PME# enabled [ 9615.245047] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 9615.260784] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 9615.276828] PM: late suspend of devices complete after 63.935 msecs [ 9615.277084] ACPI: Preparing to enter system sleep state S3 [ 9615.448761] PM: Saving platform NVS memory [ 9615.450291] Disabling non-boot CPUs ... [ 9615.552628] CPU 1 is now offline [ 9615.656576] CPU 2 is now offline [ 9615.760549] CPU 3 is now offline [ 9615.760948] Extended CMOS year: 2000 [ 9615.761287] ACPI: Low-level resume complete [ 9615.761363] PM: Restoring platform NVS memory [ 9615.763357] Extended CMOS year: 2000 [ 9615.763490] Enabling non-boot CPUs ... [ 9615.763619] Booting Node 0 Processor 1 APIC 0x1 [ 9615.763621] smpboot cpu 1: start_ip = 99000 [ 9615.773934] Initializing CPU#1 [ 9615.774644] Calibrating delay loop (skipped) already calibrated this CPU [ 9615.774658] Disabled fast string operations [ 9615.795002] NMI watchdog enabled, takes one hw-pmu counter. [ 9615.827111] CPU1 is up [ 9615.827273] Booting Node 0 Processor 2 APIC 0x2 [ 9615.827275] smpboot cpu 2: start_ip = 99000 [ 9615.837453] Initializing CPU#2 [ 9615.838197] Calibrating delay loop (skipped) already calibrated this CPU [ 9615.838209] Disabled fast string operations [ 9615.858584] NMI watchdog enabled, takes one hw-pmu counter. [ 9615.922998] CPU2 is up [ 9615.923241] Booting Node 0 Processor 3 APIC 0x3 [ 9615.923243] smpboot cpu 3: start_ip = 99000 [ 9615.933421] Initializing CPU#3 [ 9615.934164] Calibrating delay loop (skipped) already calibrated this CPU [ 9615.934176] Disabled fast string operations [ 9615.954801] NMI watchdog enabled, takes one hw-pmu counter. [ 9615.987032] CPU3 is up [ 9615.991250] ACPI: Waking up from system sleep state S3 [ 9616.334840] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9616.334850] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 9616.334873] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9616.334889] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [ 9616.334896] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 9616.334919] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 9616.334932] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [ 9616.334941] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 9616.334968] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9616.334985] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [ 9616.334993] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 9616.335016] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 9616.335021] ehci_hcd 0000:00:1a.0: PME# disabled [ 9616.335026] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 9616.335030] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 9616.335048] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 9616.335063] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [ 9616.335068] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 9616.335074] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 9616.335104] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9616.335114] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 9616.335119] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 9616.335125] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 9616.335133] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 9616.335139] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 9616.335174] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 9616.335185] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 9616.335190] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [ 9616.335195] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [ 9616.335203] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 9616.335209] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9616.335252] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9616.335267] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [ 9616.335273] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [ 9616.335278] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 9616.335289] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 9616.335297] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9616.335337] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 9616.335353] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [ 9616.335361] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 9616.335379] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 9616.335383] ehci_hcd 0000:00:1d.0: PME# disabled [ 9616.335386] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9616.335390] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9616.335457] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 9616.335545] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [ 9616.335572] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [ 9616.335581] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 9616.335588] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 9616.335597] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9616.335741] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 9616.335781] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 9616.335897] PM: early resume of devices complete after 1.107 msecs [ 9616.336003] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 9616.336008] i915 0000:00:02.0: power state changed by ACPI to D0 [ 9616.336011] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 9616.336014] e1000e 0000:00:19.0: PME# disabled [ 9616.336016] i915 0000:00:02.0: power state changed by ACPI to D0 [ 9616.336019] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 9616.336036] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9616.336039] i915 0000:00:02.0: setting latency timer to 64 [ 9616.336050] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 9616.336073] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 9616.336084] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9616.336103] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9616.336205] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 9616.336208] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9616.336214] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 9616.336217] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9616.336230] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 9616.336239] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 9616.336267] rtlwifi: wireless switch is on [ 9616.336269] ahci 0000:00:1f.2: setting latency timer to 64 [ 9616.336451] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9616.336658] sd 0:0:0:0: [sda] Starting disk [ 9616.338349] watchdog: only one watchdog can use /dev/watchdog. [ 9616.338351] watchdog: error registering /dev/watchdog (err=-16). [ 9616.338353] mei: unable to register watchdog device. [ 9616.349857] Extended CMOS year: 2000 [ 9616.438232] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 102.277 msecs [ 9616.514685] PM: resume of drv:hub dev:1-1:1.0 complete after 178.020 msecs [ 9616.514714] PM: resume of drv: dev:ep_00 complete after 178.005 msecs [ 9616.514727] PM: resume of drv: dev:ep_81 complete after 178.052 msecs [ 9616.586774] usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd [ 9616.654596] ata5: SATA link down (SStatus 0 SControl 300) [ 9616.680957] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 9616.680966] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 9616.709039] PM: resume of drv:i915 dev:0000:00:02.0 complete after 373.212 msecs [ 9616.838678] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 9616.838784] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.718 msecs [ 9616.930734] PM: resume of drv:usb dev:1-1.4:1.0 complete after 593.995 msecs [ 9616.930738] PM: resume of drv: dev:ep_00 complete after 593.658 msecs [ 9616.930746] PM: resume of drv:usb dev:1-1.4:1.3 complete after 593.706 msecs [ 9616.930749] PM: resume of drv: dev:ep_82 complete after 593.960 msecs [ 9616.930751] PM: resume of drv:usb dev:1-1.4:1.2 complete after 593.803 msecs [ 9616.930755] PM: resume of drv: dev:ep_02 complete after 593.932 msecs [ 9616.930761] PM: resume of drv:usb dev:1-1.4:1.1 complete after 593.908 msecs [ 9616.930774] PM: resume of drv: dev:ep_81 complete after 594.004 msecs [ 9616.930778] PM: resume of drv: dev:ep_04 complete after 593.768 msecs [ 9616.930782] PM: resume of drv: dev:ep_84 complete after 593.803 msecs [ 9616.930789] PM: resume of drv: dev:ep_03 complete after 593.872 msecs [ 9616.930796] PM: resume of drv: dev:ep_83 complete after 593.912 msecs [ 9617.726119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9617.729569] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 9617.729580] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 9617.729589] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 9617.736343] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 9617.736355] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 9617.736363] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 9617.739573] ata1.00: configured for UDMA/100 [ 9617.781122] PM: resume of drv:sd dev:0:0:0:0 complete after 1445.057 msecs [ 9617.781219] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1445.129 msecs [ 9617.781224] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1431.941 msecs [ 9617.782562] PM: resume of devices complete after 1447.237 msecs [ 9617.782835] PM: resume devices took 1.448 seconds [ 9617.782965] PM: Finishing wakeup. [ 9617.782967] Restarting tasks ... done. [ 9617.805001] video LNXVIDEO:00: Restoring backlight state [ 9618.455236] e1000e 0000:00:19.0: PME# enabled [ 9618.545750] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [ 9618.545759] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [ 9618.545767] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [ 9618.545786] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 9618.545810] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9618.545862] e1000e 0000:00:19.0: PME# disabled [ 9618.673842] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 9618.729770] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 9618.730060] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9618.734009] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 9619.178957] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9620.380109] e1000e 0000:00:19.0: PME# enabled [ 9639.140263] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 9644.215718] usb 1-1.4: USB disconnect, device number 3 [15766.016289] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [15766.016317] thinkpad_acpi: unhandled HKEY event 0x6040 [15766.016319] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [15766.016736] thinkpad_acpi: EC reports that Thermal Table has changed [15766.021673] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [15766.021683] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [15766.021692] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [15766.021716] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [15766.021749] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [15766.021795] e1000e 0000:00:19.0: PME# disabled [15766.021901] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [15807.615303] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [15807.615320] thinkpad_acpi: unhandled HKEY event 0x6040 [15807.615328] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [15807.616215] thinkpad_acpi: EC reports that Thermal Table has changed [15808.839955] e1000e 0000:00:19.0: PME# enabled [15817.727143] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [15817.727153] thinkpad_acpi: unhandled HKEY event 0x6040 [15817.727159] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [15817.728341] thinkpad_acpi: EC reports that Thermal Table has changed [15817.750650] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [15817.750660] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [15817.750667] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [15817.750683] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [15817.750702] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [15817.750733] e1000e 0000:00:19.0: PME# disabled [15817.750801] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [18072.130487] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [18072.225229] scsi7 : usb-storage 2-1.2:1.0 [18073.222676] scsi 7:0:0:0: Direct-Access Nokia Nokia N9 0316 PQ: 0 ANSI: 2 [18073.224164] sd 7:0:0:0: Attached scsi generic sg1 type 0 [18073.227419] sd 7:0:0:0: [sdb] 112671744 512-byte logical blocks: (57.6 GB/53.7 GiB) [18073.227837] sd 7:0:0:0: [sdb] Write Protect is off [18073.227845] sd 7:0:0:0: [sdb] Mode Sense: 0f 00 00 00 [18073.228203] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [18073.232641] sdb: [18073.234848] sd 7:0:0:0: [sdb] Attached SCSI removable disk [20709.319102] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [20709.319111] thinkpad_acpi: unhandled HKEY event 0x6040 [20709.319114] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [20709.319667] thinkpad_acpi: EC reports that Thermal Table has changed [20710.511135] e1000e 0000:00:19.0: PME# enabled [20721.365901] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [20721.365932] thinkpad_acpi: unhandled HKEY event 0x6040 [20721.365934] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [20721.366440] thinkpad_acpi: EC reports that Thermal Table has changed [20721.373802] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [20721.373810] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [20721.373816] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [20721.373833] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [20721.373852] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [20721.373884] e1000e 0000:00:19.0: PME# disabled [20721.373952] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [21274.196388] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd [21276.096941] usb 1-1.4: USB disconnect, device number 4 [21296.403136] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [21296.403142] thinkpad_acpi: unhandled HKEY event 0x6040 [21296.403145] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [21296.403618] thinkpad_acpi: EC reports that Thermal Table has changed [21297.635335] e1000e 0000:00:19.0: PME# enabled [27104.714321] usb 2-1.2: USB disconnect, device number 4 [27104.727275] sd 7:0:0:0: [sdb] Synchronizing SCSI cache [27104.727314] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [28413.782563] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [28413.782593] thinkpad_acpi: unhandled HKEY event 0x6040 [28413.782595] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [28413.783012] thinkpad_acpi: EC reports that Thermal Table has changed [28414.322219] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [28414.322231] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [28414.322237] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [28414.322262] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [28414.322286] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [28414.322334] e1000e 0000:00:19.0: PME# disabled [28414.322433] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [31924.512325] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [31924.512330] thinkpad_acpi: unhandled HKEY event 0x6040 [31924.512333] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [31924.512816] thinkpad_acpi: EC reports that Thermal Table has changed [31925.694412] e1000e 0000:00:19.0: PME# enabled [31969.753296] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [31969.753307] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [31969.753316] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [31969.753341] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [31969.753370] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [31969.753414] e1000e 0000:00:19.0: PME# disabled [31969.753499] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [31970.009270] e1000e 0000:00:19.0: PME# enabled [31971.056809] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [31971.056829] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [31971.056843] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [31971.056879] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [31971.056922] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [31971.057017] e1000e 0000:00:19.0: PME# disabled [31972.292188] PM: Syncing filesystems ... done. [31972.346394] PM: Preparing system for mem sleep [31973.979770] Freezing user space processes ... (elapsed 0.01 seconds) done. [31973.995678] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [31974.011674] PM: Entering mem sleep [31974.011752] Suspending console(s) (use no_console_suspend to debug) [31974.192432] PM: suspend of drv:psmouse dev:serio2 complete after 180.635 msecs [31974.192881] sd 0:0:0:0: [sda] Synchronizing SCSI cache [31974.221444] sd 0:0:0:0: [sda] Stopping disk [31974.280109] sdhci-pci 0000:0d:00.0: PCI INT A disabled [31974.299467] i915 0000:00:02.0: power state changed by ACPI to D3 [31974.299528] ehci_hcd 0000:00:1a.0: PCI INT A disabled [31974.299532] ehci_hcd 0000:00:1d.0: PCI INT A disabled [31974.374580] e1000e 0000:00:19.0: PME# enabled [31974.374592] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [31974.383839] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [31974.387446] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 108.400 msecs [31974.399444] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 120.440 msecs [31974.467969] PM: suspend of drv:sd dev:0:0:0:0 complete after 275.199 msecs [31974.468070] PM: suspend of drv:scsi dev:target0:0:0 complete after 275.150 msecs [31974.468138] PM: suspend of drv:scsi dev:host0 complete after 189.424 msecs [31974.491416] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 212.530 msecs [31974.491495] PM: suspend of drv: dev:pci0000:00 complete after 208.143 msecs [31974.491537] PM: suspend of devices complete after 479.894 msecs [31974.491540] PM: suspend devices took 0.480 seconds [31974.507569] ehci_hcd 0000:00:1d.0: PME# enabled [31974.507579] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [31974.523419] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [31974.523668] ehci_hcd 0000:00:1a.0: PME# enabled [31974.523675] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [31974.539406] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [31974.555456] PM: late suspend of devices complete after 63.935 msecs [31974.555712] ACPI: Preparing to enter system sleep state S3 [31974.727387] PM: Saving platform NVS memory [31974.728901] Disabling non-boot CPUs ... [31974.831261] CPU 1 is now offline [31974.935309] CPU 2 is now offline [31974.936286] Broke affinity for irq 12 [31975.039159] CPU 3 is now offline [31975.039586] Extended CMOS year: 2000 [31975.039925] ACPI: Low-level resume complete [31975.040000] PM: Restoring platform NVS memory [31975.041989] Extended CMOS year: 2000 [31975.042122] Enabling non-boot CPUs ... [31975.042249] Booting Node 0 Processor 1 APIC 0x1 [31975.042250] smpboot cpu 1: start_ip = 99000 [31975.052453] Initializing CPU#1 [31975.053174] Calibrating delay loop (skipped) already calibrated this CPU [31975.053188] Disabled fast string operations [31975.073591] NMI watchdog enabled, takes one hw-pmu counter. [31975.105743] CPU1 is up [31975.105897] Booting Node 0 Processor 2 APIC 0x2 [31975.105899] smpboot cpu 2: start_ip = 99000 [31975.116077] Initializing CPU#2 [31975.116821] Calibrating delay loop (skipped) already calibrated this CPU [31975.116833] Disabled fast string operations [31975.137287] NMI watchdog enabled, takes one hw-pmu counter. [31975.169633] CPU2 is up [31975.169722] Booting Node 0 Processor 3 APIC 0x3 [31975.169724] smpboot cpu 3: start_ip = 99000 [31975.179901] Initializing CPU#3 [31975.180644] Calibrating delay loop (skipped) already calibrated this CPU [31975.180656] Disabled fast string operations [31975.201209] NMI watchdog enabled, takes one hw-pmu counter. [31975.233713] CPU3 is up [31975.237934] ACPI: Waking up from system sleep state S3 [31975.561481] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [31975.561492] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [31975.561514] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [31975.561530] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0x91525004) [31975.561537] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [31975.561561] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [31975.561574] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081) [31975.561583] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [31975.561609] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [31975.561626] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0x9152a000) [31975.561634] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [31975.561657] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [31975.561663] ehci_hcd 0000:00:1a.0: PME# disabled [31975.561667] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [31975.561671] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [31975.561689] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [31975.561704] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x91520004) [31975.561709] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [31975.561715] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [31975.561745] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [31975.561755] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [31975.561761] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [31975.561766] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [31975.561774] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [31975.561780] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [31975.561816] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [31975.561827] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [31975.561832] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x91409140) [31975.561837] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040) [31975.561845] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [31975.561851] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [31975.561894] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [31975.561908] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x90b19041) [31975.561914] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x913090c0) [31975.561920] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [31975.561931] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [31975.561939] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [31975.561979] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [31975.561995] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0x91529000) [31975.562003] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [31975.562021] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [31975.562025] ehci_hcd 0000:00:1d.0: PME# disabled [31975.562028] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [31975.562032] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [31975.562097] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [31975.562185] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) [31975.562213] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0x91400004) [31975.562222] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [31975.562228] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [31975.562237] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [31975.562479] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [31975.562519] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [31975.562633] PM: early resume of devices complete after 1.202 msecs [31975.562741] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [31975.562749] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [31975.562757] e1000e 0000:00:19.0: PME# disabled [31975.562759] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [31975.562766] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [31975.562776] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [31975.562789] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [31975.562798] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [31975.562828] mei 0000:00:16.0: irq 41 for MSI/MSI-X [31975.562833] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [31975.562843] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [31975.562858] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [31975.562877] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [31975.562923] ahci 0000:00:1f.2: setting latency timer to 64 [31975.562933] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [31975.562957] rtlwifi: wireless switch is on [31975.563189] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [31975.563198] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [31975.563202] i915 0000:00:02.0: power state changed by ACPI to D0 [31975.563210] i915 0000:00:02.0: power state changed by ACPI to D0 [31975.563216] i915 0000:00:02.0: setting latency timer to 64 [31975.565029] watchdog: only one watchdog can use /dev/watchdog. [31975.565031] watchdog: error registering /dev/watchdog (err=-16). [31975.565033] mei: unable to register watchdog device. [31975.577354] sd 0:0:0:0: [sda] Starting disk [31975.578471] Extended CMOS year: 2000 [31975.905231] ata5: SATA link down (SStatus 0 SControl 300) [31975.923694] PM: resume of drv:i915 dev:0000:00:02.0 complete after 361.124 msecs [31976.065287] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [31976.065360] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.606 msecs [31976.960776] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [31976.967610] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31976.967621] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31976.967629] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31976.974574] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31976.974585] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31976.974593] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31976.977867] ata1.00: configured for UDMA/100 [31977.019663] PM: resume of drv:sd dev:0:0:0:0 complete after 1456.713 msecs [31977.019715] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1441.809 msecs [31977.019739] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1456.778 msecs [31977.021024] PM: resume of devices complete after 1458.968 msecs [31977.021099] PM: resume devices took 1.460 seconds [31977.021228] PM: Finishing wakeup. [31977.021230] Restarting tasks ... done. [31977.034534] video LNXVIDEO:00: Restoring backlight state [31977.458690] e1000e 0000:00:19.0: PME# enabled [31977.592462] e1000e 0000:00:19.0: BAR 0: set to [mem 0x91500000-0x9151ffff] (PCI address [0x91500000-0x9151ffff]) [31977.592472] e1000e 0000:00:19.0: BAR 1: set to [mem 0x9152b000-0x9152bfff] (PCI address [0x9152b000-0x9152bfff]) [31977.592481] e1000e 0000:00:19.0: BAR 2: set to [io 0x5080-0x509f] (PCI address [0x5080-0x509f]) [31977.592505] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [31977.592531] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [31977.592594] e1000e 0000:00:19.0: PME# disabled [31977.720699] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [31977.776495] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [31977.776785] ADDRCONF(NETDEV_UP): eth0: link is not ready [31978.989361] e1000e 0000:00:19.0: PME# enabled [32028.171823] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd [32030.807463] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [32031.147080] ADDRCONF(NETDEV_UP): wlan0: link is not ready [32035.532686] usb 1-1.4: USB disconnect, device number 5 [32041.635307] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [32042.846028] wlan0: direct probe to 00:1d:a2:9f:9a:60 (try 1/3) [32042.848717] wlan0: direct probe responded [32042.893417] wlan0: authenticate with 00:1d:a2:9f:9a:60 (try 1) [32042.894771] wlan0: authenticated [32042.915218] wlan0: associate with 00:1d:a2:9f:9a:60 (try 1) [32042.920809] wlan0: RX AssocResp from 00:1d:a2:9f:9a:60 (capab=0x421 status=0 aid=41) [32042.920818] wlan0: associated [32042.921266] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [32053.480923] wlan0: no IPv6 routers present [32088.026520] wlan0: deauthenticating from 00:1d:a2:9f:9a:60 by local choice (reason=3) [32088.042856] cfg80211: All devices are disconnected, going to restore regulatory settings [32088.042863] cfg80211: Restoring regulatory settings [32088.042872] cfg80211: Calling CRDA to update world regulatory domain [32088.108964] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [32088.108968] cfg80211: World regulatory domain updated: [32088.108970] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [32088.108973] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32088.108975] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [32088.108977] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [32088.108980] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32088.108982] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32090.830257] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [32092.019402] wlan0: authenticate with 00:1d:a2:9f:9a:60 (try 1) [32092.020688] wlan0: authenticated [32092.022090] wlan0: associate with 00:1d:a2:9f:9a:60 (try 1) [32092.025637] wlan0: RX ReassocResp from 00:1d:a2:9f:9a:60 (capab=0x421 status=0 aid=43) [32092.025649] wlan0: associated [32102.492615] wlan0: no IPv6 routers present