[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-1423-omap4 (buildd@iara) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #30-Ubuntu SMP PREEMPT Sat Dec 8 00:05:10 UTC 2012 (Ubuntu 3.2.0-1423.30-omap4 3.2.34)
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: OMAP4 Panda board
[    0.000000] Reserving 41943040 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 237312
[    0.000000] free_area_init_node: node 0, pgdat c0970100, node_mem_map c0a3a000
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 180736 pages, LIFO batch:31
[    0.000000]   HighMem zone: 512 pages used for memmap
[    0.000000]   HighMem zone: 54528 pages, LIFO batch:15
[    0.000000] OMAP4460 ES1.1
[    0.000000] PERCPU: Embedded 8 pages/cpu @c1242000 s10112 r8192 d14464 u32768
[    0.000000] pcpu-alloc: s10112 r8192 d14464 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 235264
[    0.000000] Kernel command line: ro elevator=noop vram=40M mem=456M@0x80000000 mem=512M@0xA0000000 root=UUID=8b3fb197-5211-4c22-81af-ed88aa7ad583 fixrtc quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 456MB 471MB = 927MB total
[    0.000000] Memory: 921444k/921444k available, 69788k reserved, 220160K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xf8000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b5590   (8886 kB)
[    0.000000]       .init : 0xc08b6000 - 0xc091a780   ( 402 kB)
[    0.000000]       .data : 0xc091c000 - 0xc0973748   ( 350 kB)
[    0.000000]        .bss : 0xc097376c - 0xc0a39a6c   ( 793 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:410 nr_irqs:410 410
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at /build/buildd/linux-ti-omap4-3.2.0/arch/arm/common/gic.c:611 gic_init+0xb0/0x11c()
[    0.000000] Cannot allocate irq_descs @ IRQ16, assuming pre-allocated
[    0.000000] Modules linked in:
[    0.000000] [<c0015e80>] (unwind_backtrace+0x0/0xec) from [<c05bbe30>] (dump_stack+0x20/0x24)
[    0.000000] [<c05bbe30>] (dump_stack+0x20/0x24) from [<c005297c>] (warn_slowpath_common+0x5c/0x74)
[    0.000000] [<c005297c>] (warn_slowpath_common+0x5c/0x74) from [<c0052a50>] (warn_slowpath_fmt+0x40/0x48)
[    0.000000] [<c0052a50>] (warn_slowpath_fmt+0x40/0x48) from [<c08bdd20>] (gic_init+0xb0/0x11c)
[    0.000000] [<c08bdd20>] (gic_init+0xb0/0x11c) from [<c08c1430>] (gic_init_irq+0x6c/0x80)
[    0.000000] [<c08c1430>] (gic_init_irq+0x6c/0x80) from [<c08b94fc>] (init_IRQ+0x1c/0x24)
[    0.000000] [<c08b94fc>] (init_IRQ+0x1c/0x24) from [<c08b6774>] (start_kernel+0x184/0x308)
[    0.000000] [<c08b6774>] (start_kernel+0x184/0x308) from [<80008044>] (0x80008044)
[    0.000000] ---[ end trace da227214a82491b7 ]---
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000244] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
[    0.070404] pid_max: default: 32768 minimum: 301
[    0.070678] Security Framework initialized
[    0.070739] AppArmor: AppArmor initialized
[    0.070739] Yama: becoming mindful.
[    0.071075] Mount-cache hash table entries: 512
[    0.072174] Initializing cgroup subsys cpuacct
[    0.072235] Initializing cgroup subsys memory
[    0.072296] Initializing cgroup subsys devices
[    0.072326] Initializing cgroup subsys freezer
[    0.072326] Initializing cgroup subsys net_cls
[    0.072357] Initializing cgroup subsys blkio
[    0.072387] Initializing cgroup subsys perf_event
[    0.072540] CPU: Testing write buffer coherency: ok
[    0.072631] ftrace: allocating 25700 entries in 76 pages
[    0.117431] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.117492] Calibrating local timer... 341.55MHz.
[    0.164306] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.164428] Setting up static identity map for 0x805d6f08 - 0x805d6f50
[    0.164459] L310 cache controller enabled
[    0.164489] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[    0.240905] CPU1: Booted secondary processor
[    0.271057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.271087] CPU1: Unknown IPI message 0x1
[    0.271118] Brought up 2 CPUs
[    0.271148] SMP: Total of 2 processors activated (2755.07 BogoMIPS).
[    0.272125] devtmpfs: initialized
[    0.276733] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[    0.331939] omap_hwmod: mcpdm: _wait_target_ready: -16
[    0.331939] ------------[ cut here ]------------
[    0.331970] WARNING: at /build/buildd/linux-ti-omap4-3.2.0/arch/arm/mach-omap2/omap_hwmod.c:1509 _enable+0x1ec/0x220()
[    0.332000] Modules linked in:
[    0.332031] [<c0015e80>] (unwind_backtrace+0x0/0xec) from [<c05bbe30>] (dump_stack+0x20/0x24)
[    0.332092] [<c05bbe30>] (dump_stack+0x20/0x24) from [<c005297c>] (warn_slowpath_common+0x5c/0x74)
[    0.332122] [<c005297c>] (warn_slowpath_common+0x5c/0x74) from [<c00529c0>] (warn_slowpath_null+0x2c/0x34)
[    0.332153] [<c00529c0>] (warn_slowpath_null+0x2c/0x34) from [<c0022c4c>] (_enable+0x1ec/0x220)
[    0.332183] [<c0022c4c>] (_enable+0x1ec/0x220) from [<c002307c>] (_setup.part.13+0x20/0xf0)
[    0.332214] [<c002307c>] (_setup.part.13+0x20/0xf0) from [<c00231e0>] (_setup+0x94/0x9c)
[    0.332244] [<c00231e0>] (_setup+0x94/0x9c) from [<c002338c>] (omap_hwmod_for_each+0x38/0x68)
[    0.332275] [<c002338c>] (omap_hwmod_for_each+0x38/0x68) from [<c08c07f4>] (omap_hwmod_setup_all+0x74/0xa0)
[    0.332305] [<c08c07f4>] (omap_hwmod_setup_all+0x74/0xa0) from [<c0008774>] (do_one_initcall+0xa0/0x170)
[    0.332336] [<c0008774>] (do_one_initcall+0xa0/0x170) from [<c08b69f4>] (kernel_init+0xfc/0x1a8)
[    0.332366] [<c08b69f4>] (kernel_init+0xfc/0x1a8) from [<c000ef04>] (kernel_thread_exit+0x0/0x8)
[    0.332397] ---[ end trace da227214a82491b8 ]---
[    0.332397] omap_hwmod: mcpdm: cannot be enabled (3)
[    0.339141] Enabling ERRATA 751472
[    0.339172] OMAP4: Map 0xafe00000 to 0xfe600000 for dram barrier
[    0.340087] print_constraints: dummy: 
[    0.340393] NET: Registered protocol family 16
[    0.340850] Trying to unpack rootfs image as initramfs...
[    0.347625] GPMC revision 6.0
[    0.347747]  mpu.0: alias fck already exists
[    0.348083]  iva.0: alias fck already exists
[    0.350280] OMAP GPIO hardware version 0.1
[    0.351989] omap_mux_init: Add partition: #1: core, flags: 2
[    0.353027] omap_mux_init: Add partition: #2: wkup, flags: 2
[    0.364105] SRAM: Mapped pa 0x40300000 to va 0xf0840000 size: 0xd000
[    0.367614] _omap_mux_init_gpio: Could not set gpio7
[    0.367706] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.367706] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.373718] omap_ipussdev_init: could not look up fdif
[    0.374694] OMAP DMA hardware revision 0.0
[    0.383270] bio: create slab <bio-0> at 0
[    0.384246] print_constraints: vwl1271: 1800 mV 
[    0.385620] i2c-core: driver [twl] using legacy suspend method
[    0.385650] i2c-core: driver [twl] using legacy resume method
[    0.386505] SCSI subsystem initialized
[    0.386810] libata version 3.00 loaded.
[    0.388153] usbcore: registered new interface driver usbfs
[    0.388214] usbcore: registered new interface driver hub
[    0.388458] usbcore: registered new device driver usb
[    0.400817] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[    0.401550] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    0.402099] twl6030: PIH (irq 39) chaining IRQs 368..387
[    0.402801] print_constraints: VUSB: 3300 mV normal standby
[    0.605712] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[    0.606353] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[    0.606933] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[    0.607452] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
[    0.608093] print_constraints: VCXIO: 1800 mV normal standby
[    0.608459] print_constraints: VDAC: 1800 mV normal standby
[    0.608978] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
[    0.609039] twl_reg twl_reg.37: Failed to set supply vmmc
[    0.609161] twl_reg twl_reg.37: can't register VAUX1_6030, -16
[    0.609191] twl_reg: probe of twl_reg.37 failed with error -16
[    0.609619] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[    0.610137] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[    0.610504] print_constraints: CLK32KG: 
[    0.610809] print_constraints: VANA: 2100 mV normal standby
[    0.621917] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[    0.637145] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[    0.652404] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[    0.653259] iommu_enable: NULL arch_iommu
[    0.653259] omap-iommu omap-iommu.0: can't get omap iommu: -19
[    0.653289] omap-iommu omap-iommu.0: can't attach iommu device: -19
[    0.653381] omap-iommu omap-iommu.1: tesla registered
[    0.653564] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.654174] NetLabel: Initializing
[    0.654205] NetLabel:  domain hash size = 128
[    0.654205] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.654266] NetLabel:  unlabeled traffic allowed by default
[    0.654724] Switching to clocksource 32k_counter
[    0.675354] FS-Cache: Loaded
[    0.675628] AppArmor: AppArmor Filesystem Enabled
[    0.690612] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.690856] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.690887] musb-hdrc: MHDRC RTL version 2.0 
[    0.690887] musb-hdrc: setup fifo_mode 4
[    0.690917] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.691284] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[    0.691589] NET: Registered protocol family 2
[    0.691986] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.693206] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.695465] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.696685] TCP: Hash tables configured (established 131072 bind 65536)
[    0.696716] TCP reno registered
[    0.696746] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.696777] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.697357] NET: Registered protocol family 1
[    0.773773] Freeing initrd memory: 4540K
[    0.999755] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
[    0.999755] ipu-power initialized ipu, major: 253, minor: 0
[    1.000366] iovmm-omap initialized ducati, major: 252, base-minor: 0
[    1.000610] iovmm-omap initialized tesla, major: 252, base-minor: 1
[    1.001586] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
[    1.001831] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 251, base-minor: 0
[    1.001861] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
[    1.002075] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 251, base-minor: 1
[    1.002105] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
[    1.002319] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 251, base-minor: 2
[    1.003051] audit: initializing netlink socket (disabled)
[    1.003082] type=2000 audit(0.976:1): initialized
[    1.114654] highmem bounce pool size: 64 pages
[    1.123748] VFS: Disk quotas dquot_6.5.2
[    1.124206] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.127838] fuse init (API version 7.17)
[    1.128417] msgmni has been set to 1378
[    1.130157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.130310] io scheduler noop registered (default)
[    1.130310] io scheduler deadline registered
[    1.130371] io scheduler cfq registered
[    1.131103] OMAP DSS rev 4.0
[    1.154541] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[    1.272033] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[    1.397033] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[    1.467346] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[    1.538055] [drm] Initialized drm 1.1.0 20060810
[    1.538818] brd: module loaded
[    1.543823] loop: module loaded
[    1.543914] (stk) :sysfs entries created
[    1.543975] (stk) : debugfs entries created 
[    1.544860] Non-trimmed BGAP, Temp not accurate
[    1.544891] thermal_sensor_dev_register:Need to init the cpu domain
[    1.551361] Fixed MDIO Bus: probed
[    1.551361] tun: Universal TUN/TAP device driver, 1.6
[    1.551391] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.551788] PPP generic driver version 2.4.2
[    1.552154] usbcore: registered new interface driver smsc95xx
[    1.552459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.552459] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[    1.552642] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
[    1.552764] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[    1.552764] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
[    1.552795] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[    1.553100] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[    1.553314] ehci-omap ehci-omap.0: park 0
[    1.553314] ehci-omap ehci-omap.0: support lpm
[    1.553344] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[    1.553375] ehci-omap ehci-omap.0: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
[    1.553405] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[    1.568878] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[    1.569030] usb usb1: default language 0x0409
[    1.569091] usb usb1: udev 1, busnum 1, minor = 0
[    1.569091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.569122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.569152] usb usb1: Product: OMAP-EHCI Host Controller
[    1.569152] usb usb1: Manufacturer: Linux 3.2.0-1423-omap4 ehci_hcd
[    1.569152] usb usb1: SerialNumber: ehci-omap.0
[    1.569641] usb usb1: usb_probe_device
[    1.569671] usb usb1: configuration #1 chosen from 1 choice
[    1.569702] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    1.569854] hub 1-0:1.0: usb_probe_interface
[    1.569885] hub 1-0:1.0: usb_probe_interface - got id
[    1.569885] hub 1-0:1.0: USB hub found
[    1.569915] hub 1-0:1.0: 3 ports detected
[    1.569946] hub 1-0:1.0: standalone hub
[    1.569946] hub 1-0:1.0: individual port power switching
[    1.569976] hub 1-0:1.0: individual port over-current protection
[    1.569976] hub 1-0:1.0: power on to power good time: 20ms
[    1.570007] hub 1-0:1.0: local power source is good
[    1.570037] hub 1-0:1.0: enabling power on all ports
[    1.570281] ehci-omap ehci-omap.0: ...powerup ports...
[    1.600158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.600189] ohci_hcd: block sizes: ed 64 td 64
[    1.600372] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[    1.600646] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
[    1.600677] ohci-omap3 ohci-omap3.0: starting OHCI controller
[    1.600769] ohci-omap3 ohci-omap3.0: created debug files
[    1.600799] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
[    1.670440] ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    1.670471] hub 1-0:1.0: port 1: status 0501 change 0001
[    1.682281] ohci-omap3 ohci-omap3.0: OHCI controller state
[    1.682312] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers
[    1.682342] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
[    1.682342] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
[    1.682373] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
[    1.682373] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[    1.682403] ohci-omap3 ohci-omap3.0: hcca frame #0014
[    1.682434] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
[    1.682434] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
[    1.682464] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
[    1.682464] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
[    1.682495] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
[    1.682525] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
[    1.682586] usb usb2: default language 0x0409
[    1.682617] usb usb2: udev 1, busnum 2, minor = 128
[    1.682647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.682647] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.682678] usb usb2: Product: OMAP3 OHCI Host Controller
[    1.682678] usb usb2: Manufacturer: Linux 3.2.0-1423-omap4 ohci_hcd
[    1.682708] usb usb2: SerialNumber: ohci-omap3.0
[    1.683166] usb usb2: usb_probe_device
[    1.683197] usb usb2: configuration #1 chosen from 1 choice
[    1.683227] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    1.683380] hub 2-0:1.0: usb_probe_interface
[    1.683410] hub 2-0:1.0: usb_probe_interface - got id
[    1.683410] hub 2-0:1.0: USB hub found
[    1.683441] hub 2-0:1.0: 3 ports detected
[    1.683441] hub 2-0:1.0: standalone hub
[    1.683471] hub 2-0:1.0: no power switching (usb 1.0)
[    1.683471] hub 2-0:1.0: global over-current protection
[    1.683502] hub 2-0:1.0: power on to power good time: 20ms
[    1.683532] hub 2-0:1.0: local power source is good
[    1.683532] hub 2-0:1.0: no over-current condition exists
[    1.683563] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    1.684112] Initializing USB Mass Storage driver...
[    1.684265] usbcore: registered new interface driver usb-storage
[    1.684265] USB Mass Storage support registered.
[    1.684692] mousedev: PS/2 mouse device common for all mice
[    1.685119] i2c-core: driver [tm12xx_ts] using legacy suspend method
[    1.685150] i2c-core: driver [tm12xx_ts] using legacy resume method
[    1.688812] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    1.689086] Linux media interface: v0.10
[    1.689178] Linux video capture interface: v2.00
[    1.692962] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    1.693603] device-mapper: uevent: version 1.0.3
[    1.694091] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.696136] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
[    1.699157] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
[    1.769561] thermal_governor_dev_register:Adding omap_ondie_governor governor
[    1.769592] thermal_init_thermal_state:Not all components registered for cpu domain sensor   (null), gov=ee575100, cooling=  (null)
[    1.770538] proc4430_drv_initializeModule
[    1.771148] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
[    1.771362] omap-devh initialized Tesla, major: 242, base-minor: 0
[    1.771545] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
[    1.771728] omap-devh initialized SysM3, major: 242, base-minor: 1
[    1.771942] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
[    1.772064] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[    1.772094] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.772338] omap-devh initialized AppM3, major: 242, base-minor: 2
[    1.774963] SDP4430 SoC init
[    1.807464] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[    1.808380] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[    1.809906] asoc: null-codec-dai <-> Voice mapping ok
[    1.810852] asoc: null-codec-dai <-> Tones mapping ok
[    1.811798] asoc: null-codec-dai <-> Vibra mapping ok
[    1.812225] asoc: null-codec-dai <-> MODEM mapping ok
[    1.812622] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[    1.814056] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    1.814971] asoc: twl6040-legacy <-> mcpdm-dl mapping ok
[    1.815887] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
[    1.816955] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[    1.817352] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[    1.817687] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[    1.818054] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[    1.818420] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    1.818817] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    1.819335] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    1.819732] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[    1.820098] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
[    1.820434] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
[    1.820770] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
[    1.824676] input: PandaES Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0
[    1.828613] Error: Driver 'hdmi-audio-dai' is already registered, aborting...
[    1.828643] OMAP4 HDMI audio SoC init
[    1.829803] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[    1.830688] ALSA device list:
[    1.830688]   #0: TI OMAP4 Board
[    1.830718]   #1: TI OMAP4 HDMI Board
[    1.830810] u32 classifier
[    1.830810]     Actions configured
[    1.832092] TCP cubic registered
[    1.832885] NET: Registered protocol family 10
[    1.834655] ehci-omap ehci-omap.0: port 1 high speed
[    1.834686] ehci-omap ehci-omap.0: GetStatus port:1 status 001805 0  ACK POWER sig=j PE CONNECT
[    1.836120] NET: Registered protocol family 17
[    1.836334] lib80211: common routines for IEEE802.11 drivers
[    1.836364] lib80211_crypt: registered algorithm 'NULL'
[    1.836364] lib80211_crypt: registered algorithm 'WEP'
[    1.836395] lib80211_crypt: registered algorithm 'CCMP'
[    1.836395] lib80211_crypt: registered algorithm 'TKIP'
[    1.836425] Registering the dns_resolver key type
[    1.836456] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    1.836486] ThumbEE CPU extension supported.
[    1.836517] Registering SWP/SWPB emulation handler
[    1.840759] thermal_cooling_dev_register:Found cpu cpu
[    1.840789] thermal_cooling_dev_register: doing deferred tdev
[    1.840789] thermal_sensor_dev_register:Found cpu cpu
[    1.840820] thermal_sensor_dev_register:Adding omap_ondie_sensor sensor
[    1.840820] thermal_init_thermal_state: Getting initial temp for cpu domain
[    1.840850] thermal_request_temp
[    1.840850] omap_safe_zone:hot spot temp 69102
[    1.840881] cpufreq_apply_cooling: Unthrottle cool level 0 curr cool 125000
[    1.840881] omap_thermal_step_freq_up: temperature reduced, stepping up to 0
[    1.840942]    thermal_request_temp got 55400
[    1.841064] omap_sr_disable: omap_sr struct for sr_mpu not found
[    1.841094] omap_sr_disable: omap_sr struct for sr_mpu not found
[    1.841156] Power Management for TI OMAP4.
[    1.841400] sr_init: No PMIC hook to init smartreflex
[    1.841400] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.841400] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.841827] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
[    1.842163] SmartReflex Class3 initialized
[    1.852050] registered taskstats version 1
[    1.889099] regulator_init_complete: VANA: incomplete constraints, leaving on
[    1.889617] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
[    1.890594] regulator_init_complete: VDAC: incomplete constraints, leaving on
[    1.891540] regulator_init_complete: VUSB: incomplete constraints, leaving on
[    1.892303] twl_rtc twl_rtc: setting system clock to 2013-01-08 19:52:54 UTC (1357674774)
[    1.898956] usb 1-1: new high-speed USB device number 2 using ehci-omap
[    1.900299] omapdrm omapdrm.0: dvi has no driver.. skipping it
[    1.959960] ehci-omap ehci-omap.0: port 1 high speed
[    1.960205] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    2.053680] usb 1-1: udev 2, busnum 1, minor = 1
[    2.053741] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.053741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.053894] usb 1-1: usb_probe_device
[    2.054168] usb 1-1: configuration #1 chosen from 1 choice
[    2.054168] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    2.054565] hub 1-1:1.0: usb_probe_interface
[    2.054565] hub 1-1:1.0: usb_probe_interface - got id
[    2.054595] hub 1-1:1.0: USB hub found
[    2.054595] hub 1-1:1.0: 5 ports detected
[    2.054595] hub 1-1:1.0: compound device; port removable status: FRRRR
[    2.054748] hub 1-1:1.0: individual port power switching
[    2.054748] hub 1-1:1.0: individual port over-current protection
[    2.054779] hub 1-1:1.0: TT per port
[    2.054779] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    2.055084] hub 1-1:1.0: power on to power good time: 100ms
[    2.055328] hub 1-1:1.0: local power source is good
[    2.055358] hub 1-1:1.0: enabling power on all ports
[    2.055938] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
[    2.088104] Console: switching to colour frame buffer device 240x67
[    2.103302] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.105255] mmc0: new high speed SDHC card at address 0007
[    2.105773] mmcblk0: mmc0:0007 SD04G 3.68 GiB 
[    2.107910]  mmcblk0: p1 p2
[    2.155090] fb0: omapdrm frame buffer device
[    2.155090] drm: registered panic notifier
[    2.155090] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.155151] [drm] No driver support for vblank timestamp query.
[    2.155181] [drm] Initialized omapdrm 1.0.0 20110403 on minor 0
[    2.162445] hub 1-1:1.0: port 1: status 0101 change 0001
[    2.162994] hub 1-1:1.0: port 2: status 0101 change 0001
[    2.162994] Freeing init memory: 400K
[    2.163360] hub 1-1:1.0: port 3: status 0101 change 0001
[    2.247100] mmc1: card claims to support voltages below the defined range. These will be ignored.
[    2.264556] usb 1-1: link qh256-0001/ee5facc0 start 1 [1/0 us]
[    2.264617] hub 1-1:1.0: state 7 ports 5 chg 000e evt 0000
[    2.265594] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    2.267150] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.269104] mmc1: new SDIO card at address 0001
[    2.271972] udevd[99]: starting version 175
[    2.351074] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[    2.468505] usb 1-1.1: udev 3, busnum 1, minor = 2
[    2.468505] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.468536] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.468902] usb 1-1.1: usb_probe_device
[    2.469055] usb 1-1.1: configuration #1 chosen from 1 choice
[    2.471343] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[    2.471343] smsc95xx 1-1.1:1.0: usb_probe_interface
[    2.471557] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
[    2.471557] smsc95xx v1.0.4
[    2.542602] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 0e:60:05:60:4e:01
[    2.545135] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[    2.624694] usb 1-1.2: new high-speed USB device number 4 using ehci-omap
[    2.741699] usb 1-1.2: default language 0x0409
[    2.747467] usb 1-1.2: udev 4, busnum 1, minor = 3
[    2.747924] usb 1-1.2: New USB device found, idVendor=13fe, idProduct=3600
[    2.747924] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.747985] usb 1-1.2: Product:                 
[    2.747985] usb 1-1.2: Manufacturer:         
[    2.748016] usb 1-1.2: SerialNumber: 0707242672F71702
[    2.748199] usb 1-1.2: usb_probe_device
[    2.748535] usb 1-1.2: configuration #1 chosen from 1 choice
[    2.748779] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[    2.748779] usb-storage 1-1.2:1.0: usb_probe_interface
[    2.748779] usb-storage 1-1.2:1.0: usb_probe_interface - got id
[    2.749786] usb-storage 1-1.2:1.0: Quirks match for vid 13fe pid 3600: 4000
[    2.749969] scsi0 : usb-storage 1-1.2:1.0
[    2.750854] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
[    2.773834] ohci-omap3 ohci-omap3.0: auto-stop root hub
[    2.835205] usb 1-1.3: new high-speed USB device number 5 using ehci-omap
[    3.125366] usb 1-1.3: default language 0x0409
[    3.125854] usb 1-1.3: udev 5, busnum 1, minor = 4
[    3.125885] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
[    3.125915] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.125915] usb 1-1.3: Product: USB2.0 Hub
[    3.126098] usb 1-1.3: usb_probe_device
[    3.126403] usb 1-1.3: configuration #1 chosen from 1 choice
[    3.126708] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
[    3.127014] hub 1-1.3:1.0: usb_probe_interface
[    3.127044] hub 1-1.3:1.0: usb_probe_interface - got id
[    3.127044] hub 1-1.3:1.0: USB hub found
[    3.127502] hub 1-1.3:1.0: 4 ports detected
[    3.127532] hub 1-1.3:1.0: standalone hub
[    3.127563] hub 1-1.3:1.0: ganged power switching
[    3.127563] hub 1-1.3:1.0: global over-current protection
[    3.127593] hub 1-1.3:1.0: Single TT
[    3.127593] hub 1-1.3:1.0: TT requires at most 32 FS bit times (2664 ns)
[    3.127624] hub 1-1.3:1.0: Port indicators are supported
[    3.127624] hub 1-1.3:1.0: power on to power good time: 100ms
[    3.128234] hub 1-1.3:1.0: local power source is good
[    3.128265] hub 1-1.3:1.0: no over-current condition exists
[    3.128265] hub 1-1.3:1.0: enabling power on all ports
[    3.130004] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008
[    3.245788] hub 1-1.3:1.0: port 1: status 0101 change 0001
[    3.246612] hub 1-1.3:1.0: port 2: status 0301 change 0001
[    3.417663] usb 1-1.3: link qh256-0001/ee8e3980 start 2 [1/0 us]
[    3.417755] hub 1-1.3:1.0: state 7 ports 4 chg 0006 evt 0000
[    3.418121] hub 1-1.3:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    3.510955] usb 1-1.3.1: new full-speed USB device number 6 using ehci-omap
[    3.775299] usb 1-1.3.1: ep0 maxpacket = 8
[    3.777008] usb 1-1.3.1: default language 0x0409
[    3.778228] usb 1-1.3.1: udev 6, busnum 1, minor = 5
[    3.778228] usb 1-1.3.1: New USB device found, idVendor=05f3, idProduct=0081
[    3.778289] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.778289] usb 1-1.3.1: Product: Kinesis Keyboard Hub
[    3.778320] usb 1-1.3.1: Manufacturer: PI Engineering
[    3.778778] usb 1-1.3.1: usb_probe_device
[    3.778808] usb 1-1.3.1: configuration #1 chosen from 1 choice
[    3.779205] usb 1-1.3.1: adding 1-1.3.1:1.0 (config #1, interface 0)
[    3.779205] hub 1-1.3.1:1.0: usb_probe_interface
[    3.779418] hub 1-1.3.1:1.0: usb_probe_interface - got id
[    3.779449] hub 1-1.3.1:1.0: USB hub found
[    3.779876] hub 1-1.3.1:1.0: 4 ports detected
[    3.779907] hub 1-1.3.1:1.0: compound device; port removable status: FFRR
[    3.779937] hub 1-1.3.1:1.0: individual port power switching
[    3.779937] hub 1-1.3.1:1.0: individual port over-current protection
[    3.779968] hub 1-1.3.1:1.0: power on to power good time: 44ms
[    3.780212] hub 1-1.3.1:1.0: hub controller current requirement: 50mA
[    3.780212] hub 1-1.3.1:1.0: 100mA bus power budget for each child
[    3.780487] hub 1-1.3.1:1.0: enabling power on all ports
[    3.783111] hub 1-1.3:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[    3.808319] scsi 0:0:0:0: Direct-Access                               PMAP PQ: 0 ANSI: 0 CCS
[    3.814392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.873901] usb 1-1.3.2: new low-speed USB device number 7 using ehci-omap
[    3.877807] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.882019] hub 1-1.3.1:1.0: port 2: status 0101 change 0001
[    3.990783] usb 1-1.3.1: link qh128-0e01/ee8e3900 start 3 [1/2 us]
[    4.008087] usb 1-1.3.2: skipped 1 descriptor after interface
[    4.008575] usb 1-1.3.2: default language 0x0409
[    4.010192] usb 1-1.3.2: udev 7, busnum 1, minor = 6
[    4.010253] usb 1-1.3.2: New USB device found, idVendor=046d, idProduct=c05a
[    4.010284] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.010284] usb 1-1.3.2: Product: USB Optical Mouse
[    4.010314] usb 1-1.3.2: Manufacturer: Logitech
[    4.010772] usb 1-1.3.2: usb_probe_device
[    4.010772] usb 1-1.3.2: configuration #1 chosen from 1 choice
[    4.010986] usb 1-1.3.2: adding 1-1.3.2:1.0 (config #1, interface 0)
[    4.011474] hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0004
[    4.011962] hub 1-1.3.1:1.0: state 7 ports 4 chg 0004 evt 0000
[    4.012207] hub 1-1.3.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[    4.059753] hub 2-0:1.0: hub_suspend
[    4.059753] usb usb2: bus auto-suspend, wakeup 1
[    4.059844] ohci-omap3 ohci-omap3.0: suspend root hub
[    4.115447] usb 1-1.3.1.2: new full-speed USB device number 8 using ehci-omap
[    4.241638] usb 1-1.3.1.2: ep0 maxpacket = 8
[    4.245208] usb 1-1.3.1.2: skipped 1 descriptor after interface
[    4.245269] usb 1-1.3.1.2: skipped 1 descriptor after interface
[    4.245300] usb 1-1.3.1.2: udev 8, busnum 1, minor = 7
[    4.245330] usb 1-1.3.1.2: New USB device found, idVendor=05f3, idProduct=0007
[    4.245330] usb 1-1.3.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.245483] usb 1-1.3.1.2: usb_probe_device
[    4.245819] usb 1-1.3.1.2: configuration #1 chosen from 1 choice
[    4.246459] usb 1-1.3.1.2: adding 1-1.3.1.2:1.0 (config #1, interface 0)
[    4.246459] usb 1-1.3.1.2: adding 1-1.3.1.2:1.1 (config #1, interface 1)
[    4.246459] hub 1-1.3.1:1.0: 386mA power budget left
[    4.247131] hub 1-1.3.1:1.0: state 7 ports 4 chg 0000 evt 0000
[    5.203674] sd 0:0:0:0: [sda] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    5.205688] sd 0:0:0:0: [sda] Write Protect is off
[    5.205688] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    5.207550] sd 0:0:0:0: [sda] No Caching mode page present
[    5.207580] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.222412] sd 0:0:0:0: [sda] No Caching mode page present
[    5.222442] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.753875] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.859893] udevd[283]: starting version 175
[    6.275177] Registered led device: pandaboard::status1
[    6.275543] Registered led device: pandaboard::status2
[    6.577667]  sda: sda1 sda2 sda3 < sda5 >
[    6.588989] sd 0:0:0:0: [sda] No Caching mode page present
[    6.588989] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    6.589324] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.665252] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    6.832580] input: twl6040:vibrator as /devices/platform/omap/omap_i2c.1/i2c-1/1-004b/twl6040/input/input1
[    6.846862] _regulator_get: twl6040-vibra supply vddvibl not found, using dummy regulator
[    6.846862] _regulator_get: twl6040-vibra supply vddvibr not found, using dummy regulator
[    6.846984] cfg80211: Calling CRDA to update world regulatory domain
[    8.642272] Adding 524232k swap on /SWAP.swap.  Priority:-1 extents:13 across:577528k SS
[    8.982727] type=1400 audit(1357674781.172:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=492 comm="apparmor_parser"
[    8.989471] type=1400 audit(1357674781.187:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=492 comm="apparmor_parser"
[    8.990509] type=1400 audit(1357674781.187:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
[    9.067413] usbhid 1-1.3.2:1.0: usb_probe_interface
[    9.067535] usbhid 1-1.3.2:1.0: usb_probe_interface - got id
[    9.074829] input: Logitech USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/input/input2
[    9.076232] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-1.3.2/input0
[    9.076232] usbhid 1-1.3.1.2:1.0: usb_probe_interface
[    9.076232] usbhid 1-1.3.1.2:1.0: usb_probe_interface - got id
[    9.084747] input: HID 05f3:0007 as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.2/1-1.3.1.2:1.0/input/input3
[    9.085418] usb 1-1.3.1.2: link qh8-0e01/eee8a400 start 4 [1/2 us]
[    9.087188] generic-usb 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-ehci-omap.0-1.3.1.2/input0
[    9.087188] usbhid 1-1.3.1.2:1.1: usb_probe_interface
[    9.087280] usbhid 1-1.3.1.2:1.1: usb_probe_interface - got id
[    9.111419] input: HID 05f3:0007 as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.2/1-1.3.1.2:1.1/input/input4
[    9.111419] usb 1-1.3.1.2: link qh8-0e01/eee8a580 start 5 [1/2 us]
[    9.119201] generic-usb 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00 Device [HID 05f3:0007] on usb-ehci-omap.0-1.3.1.2/input1
[    9.119659] usbcore: registered new interface driver usbhid
[    9.119659] usbhid: USB HID core driver
[    9.419586] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    9.419586] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.419891] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    9.419891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.419921] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    9.419952] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.419952] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    9.419952] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.419952] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    9.419952] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420074] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    9.420074] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420074] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    9.420074] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420074] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    9.420227] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420227] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    9.420227] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420227] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    9.420227] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420349] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    9.420440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420471] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    9.420471] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    9.420501] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    9.420532] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    9.420562] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    9.420562] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[    9.420593] cfg80211: Disabling freq 5035 MHz
[    9.420593] cfg80211: Disabling freq 5040 MHz
[    9.420623] cfg80211: Disabling freq 5045 MHz
[    9.420623] cfg80211: Disabling freq 5055 MHz
[    9.420654] cfg80211: Disabling freq 5060 MHz
[    9.420654] cfg80211: Disabling freq 5080 MHz
[    9.420654] cfg80211: Disabling freq 5170 MHz
[    9.420684] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    9.420715] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420715] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
[    9.420745] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420776] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    9.420776] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420806] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
[    9.420837] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420837] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    9.420867] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420898] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[    9.420898] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420928] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    9.420928] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.420928] cfg80211: Disabling freq 5260 MHz
[    9.420989] cfg80211: Disabling freq 5280 MHz
[    9.420989] cfg80211: Disabling freq 5300 MHz
[    9.421020] cfg80211: Disabling freq 5320 MHz
[    9.421020] cfg80211: Disabling freq 5500 MHz
[    9.421051] cfg80211: Disabling freq 5520 MHz
[    9.421051] cfg80211: Disabling freq 5540 MHz
[    9.421051] cfg80211: Disabling freq 5560 MHz
[    9.421081] cfg80211: Disabling freq 5580 MHz
[    9.421081] cfg80211: Disabling freq 5600 MHz
[    9.421112] cfg80211: Disabling freq 5620 MHz
[    9.421112] cfg80211: Disabling freq 5640 MHz
[    9.421142] cfg80211: Disabling freq 5660 MHz
[    9.421142] cfg80211: Disabling freq 5680 MHz
[    9.421142] cfg80211: Disabling freq 5700 MHz
[    9.421173] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    9.421173] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.421173] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    9.421234] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.421264] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    9.421264] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.421295] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    9.421295] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.421295] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    9.421356] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[    9.517608] wl1271: loaded
[    9.537292] lp: driver loaded but no devices found
[    9.575164] ppdev: user-space parallel port driver
[    9.773834] Bluetooth: Core ver 2.16
[    9.774322] NET: Registered protocol family 31
[    9.774414] Bluetooth: HCI device and connection manager initialized
[    9.774444] Bluetooth: HCI socket layer initialized
[    9.774444] Bluetooth: L2CAP socket layer initialized
[    9.774505] Bluetooth: SCO socket layer initialized
[    9.933166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.933227] Bluetooth: BNEP filters: protocol multicast
[    9.966308] Bluetooth: RFCOMM TTY layer initialized
[    9.966400] Bluetooth: RFCOMM socket layer initialized
[    9.966400] Bluetooth: RFCOMM ver 1.11
[   10.037750] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   10.037780] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.037811] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   10.037811] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.037841] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   10.037872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.037872] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   10.037902] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.037933] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   10.037933] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.037963] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   10.037994] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.037994] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   10.038024] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038024] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   10.038055] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038085] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   10.038085] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038116] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   10.038146] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038146] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   10.038146] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038208] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   10.038208] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.038238] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   10.038269] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.038269] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   10.038299] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.038299] cfg80211: Disabling freq 5035 MHz
[   10.038330] cfg80211: Disabling freq 5040 MHz
[   10.038330] cfg80211: Disabling freq 5045 MHz
[   10.038360] cfg80211: Disabling freq 5055 MHz
[   10.038360] cfg80211: Disabling freq 5060 MHz
[   10.038391] cfg80211: Disabling freq 5080 MHz
[   10.038391] cfg80211: Disabling freq 5170 MHz
[   10.038391] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[   10.038391] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038452] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
[   10.038452] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.038543] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[   10.092559] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.092559] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
[   10.092651] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.092803] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[   10.092834] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.092834] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[   10.092834] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.092895] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[   10.092895] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.092926] cfg80211: Disabling freq 5260 MHz
[   10.092926] cfg80211: Disabling freq 5280 MHz
[   10.092956] cfg80211: Disabling freq 5300 MHz
[   10.092956] cfg80211: Disabling freq 5320 MHz
[   10.092987] cfg80211: Disabling freq 5500 MHz
[   10.092987] cfg80211: Disabling freq 5520 MHz
[   10.093017] cfg80211: Disabling freq 5540 MHz
[   10.093017] cfg80211: Disabling freq 5560 MHz
[   10.093017] cfg80211: Disabling freq 5580 MHz
[   10.093048] cfg80211: Disabling freq 5600 MHz
[   10.093048] cfg80211: Disabling freq 5620 MHz
[   10.093078] cfg80211: Disabling freq 5640 MHz
[   10.093078] cfg80211: Disabling freq 5660 MHz
[   10.093078] cfg80211: Disabling freq 5680 MHz
[   10.093109] cfg80211: Disabling freq 5700 MHz
[   10.093109] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[   10.093139] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.093170] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[   10.093170] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.093200] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[   10.093231] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.093231] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[   10.093261] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.093292] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[   10.093292] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.093292] cfg80211: World regulatory domain updated:
[   10.093353] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.093353] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.093383] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.105041] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.105102] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.105102] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.355407] init: failsafe main process (570) killed by TERM signal
[   10.419494] type=1400 audit(1357674782.609:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=639 comm="apparmor_parser"
[   10.420623] type=1400 audit(1357674782.617:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=639 comm="apparmor_parser"
[   11.129821] type=1400 audit(1357674783.320:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=710 comm="apparmor_parser"
[   11.190948] type=1400 audit(1357674783.383:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=711 comm="apparmor_parser"
[   11.197113] type=1400 audit(1357674783.390:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=711 comm="apparmor_parser"
[   11.203857] type=1400 audit(1357674783.398:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=711 comm="apparmor_parser"
[   11.261322] type=1400 audit(1357674783.453:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=719 comm="apparmor_parser"
[   12.251800] wl1271: firmware booted (Rev 6.3.0.0.77)
[   12.265686] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.278533] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.292358] init: hybrid-gfx main process (776) terminated with status 1
[   12.420898] usb 1-1.1: link qh8-0001/ec096a40 start 6 [1/0 us]
[   12.420989] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.424194] ADDRCONF(NETDEV_UP): eth0: link is not ready