[ 28.858678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.859280] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.878248] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 28.878261] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement) [ 28.879431] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.879848] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.722016] wlan0: authenticate with 00:14:6c:4f:23:6e [ 36.732757] wlan0: send auth to 00:14:6c:4f:23:6e (try 1/3) [ 36.734293] wlan0: authenticated [ 36.737282] wlan0: associate with 00:14:6c:4f:23:6e (try 1/3) [ 36.739477] wlan0: RX AssocResp from 00:14:6c:4f:23:6e (capab=0x411 status=0 aid=2) [ 36.740172] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 36.740187] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 36.740189] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 36.740195] wlan0: associated [ 36.740323] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.720346] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 191.181630] wlan0: deauthenticating from 00:14:6c:4f:23:6e by local choice (reason=3) [ 191.187284] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 191.187293] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement) [ 191.187297] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 191.187945] cfg80211: All devices are disconnected, going to restore regulatory settings [ 191.187950] cfg80211: Restoring regulatory settings [ 191.187955] cfg80211: Calling CRDA to update world regulatory domain [ 191.197331] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 191.197339] cfg80211: World regulatory domain updated: [ 191.197342] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 191.197345] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.197349] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 191.197352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 191.197355] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.197357] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 197.360997] wlan0: authenticate with 00:14:6c:4f:23:6e [ 197.370368] wlan0: send auth to 00:14:6c:4f:23:6e (try 1/3) [ 197.371897] wlan0: authenticated [ 197.372286] wlan0: associate with 00:14:6c:4f:23:6e (try 1/3) [ 197.374430] wlan0: RX AssocResp from 00:14:6c:4f:23:6e (capab=0x411 status=0 aid=2) [ 197.375275] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 197.375281] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 197.375285] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 197.375294] wlan0: associated [ 199.088820] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 201.755627] wlan0: deauthenticating from 00:14:6c:4f:23:6e by local choice (reason=3) [ 201.768890] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 201.768902] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement) [ 201.768906] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 201.769596] cfg80211: All devices are disconnected, going to restore regulatory settings [ 201.769602] cfg80211: Restoring regulatory settings [ 201.769607] cfg80211: Calling CRDA to update world regulatory domain [ 201.779201] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 201.779211] cfg80211: World regulatory domain updated: [ 201.779214] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 201.779219] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 201.779224] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 201.779228] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 201.779232] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 201.779237] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 206.114248] wlan0: authenticate with 00:14:6c:4f:23:6e [ 206.123269] wlan0: send auth to 00:14:6c:4f:23:6e (try 1/3) [ 206.124779] wlan0: authenticated [ 206.125334] wlan0: associate with 00:14:6c:4f:23:6e (try 1/3) [ 206.127401] wlan0: RX AssocResp from 00:14:6c:4f:23:6e (capab=0x411 status=0 aid=2) [ 206.128192] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 206.128199] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 206.128203] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 206.128212] wlan0: associated [ 207.824698] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 254.948707] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [ 255.042173] usb 1-1.2: New USB device found, idVendor=152d, idProduct=2339 [ 255.042179] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 255.042184] usb 1-1.2: Product: USB to ATA/ATAPI Bridge [ 255.042188] usb 1-1.2: Manufacturer: JMicron [ 255.042191] usb 1-1.2: SerialNumber: 152D203380B6 [ 255.043213] scsi6 : usb-storage 1-1.2:1.0 [ 256.524210] scsi 6:0:0:0: Direct-Access FUJITSU MHW2120BH PQ: 0 ANSI: 2 CCS [ 256.526079] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 256.656674] sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 256.657261] sd 6:0:0:0: [sdc] Write Protect is off [ 256.657267] sd 6:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 256.657922] sd 6:0:0:0: [sdc] Asking for cache data failed [ 256.657928] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 256.659870] sd 6:0:0:0: [sdc] Asking for cache data failed [ 256.659876] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 256.710329] sdc: sdc1 sdc2 < sdc5 sdc6 > [ 256.712997] sd 6:0:0:0: [sdc] Asking for cache data failed [ 256.713004] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 256.713010] sd 6:0:0:0: [sdc] Attached SCSI disk