[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 2048MB; using 4096kB for hash table (at cfc00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.32-21-powerpc-smp (buildd@ross) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 09:19:32 UTC 2010 (Ubuntu 2.6.32-21.32-powerpc-smp 2.6.32.11+drm33.2) [ 0.000000] Found initrd at 0xc1e00000:0xc26ac000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000 [ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up... [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=1352, gen1=1351 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal 0x00030000 -> 0x00030000 [ 0.000000] HighMem 0x00030000 -> 0x00080000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00080000 [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] free_area_init_node: node 0, pgdat c0775d20, node_mem_map c0818000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2560 pages used for memmap [ 0.000000] HighMem zone: 325120 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 10 pages/cpu @c1824000 s16584 r8192 d16184 u65536 [ 0.000000] pcpu-alloc: s16584 r8192 d16184 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192 [ 0.000000] Kernel command line: root=/dev/hdb3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 1310720k [ 0.000000] Memory: 2057196k/2097152k available (7480k kernel code, 38912k reserved, 268k data, 486k bss, 364k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffc2000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 41.659214 MHz [ 0.000000] time_init: processor frequency = 1416.666661 MHz [ 0.000000] clocksource: timebase mult[6004658] shift[22] registered [ 0.000000] clockevent: decrementer mult[aaa2da1] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000168] Security Framework initialized [ 0.000242] AppArmor: AppArmor initialized [ 0.000264] Mount-cache hash table entries: 512 [ 0.000686] device-tree: Duplicate name in /cpus/PowerPC,G4@0/l2-cache, renamed to "l2-cache#1" [ 0.000756] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.000859] device-tree: Duplicate name in /cpus/PowerPC,G4@1/l2-cache, renamed to "l2-cache#1" [ 0.000926] device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1" [ 0.002306] device-tree: Duplicate name in /pci@f2000000/mac-io@17/gpio@50, renamed to "gpio5@6f#1" [ 0.002333] device-tree: Duplicate name in /pci@f2000000/mac-io@17/gpio@50, renamed to "gpio6@70#1" [ 0.002391] device-tree: Duplicate name in /pci@f2000000/mac-io@17/gpio@50, renamed to "gpio11@75#1" [ 0.002420] device-tree: Duplicate name in /pci@f2000000/mac-io@17/gpio@50, renamed to "extint-gpio15@67#1" [ 0.003866] Initializing cgroup subsys ns [ 0.003879] Initializing cgroup subsys devices [ 0.003886] Initializing cgroup subsys freezer [ 0.003892] Initializing cgroup subsys net_cls [ 0.003930] ftrace: allocating 17648 entries in 52 pages [ 0.011662] PowerMac SMP probe found 2 cpus [ 0.011754] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.011784] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.011803] channel 0 bus [ 0.011807] channel 1 bus [ 0.011823] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.011836] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.011842] channel 0 bus [ 0.011852] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.011858] channel 1 bus [ 0.011861] channel 2 bus [ 0.011873] pmf: no parser for command 17 ! [ 0.011907] Processor timebase sync using GPIO 0x73 [ 0.011912] mpic: requesting IPIs ... [ 0.011920] irq: irq 251 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 251 [ 0.011932] irq: irq 252 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 252 [ 0.011942] irq: irq 253 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 253 [ 0.011953] irq: irq 254 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 254 [ 0.011960] CPU0: L2CR is 80000000 [ 0.011964] CPU0: L3CR is 9c030000 [79201133.951192] CPU1: L2CR was 0 [79201133.951230] CPU1: L2CR set to 80000000 [79201133.951235] CPU1: L3CR was 0 [79201133.951380] CPU1: L3CR set to 9c030000 [ 0.013497] Processor 1 found. [ 0.013510] clockevent: decrementer mult[aaa2da1] shift[32] cpu[1] [ 0.013554] Brought up 2 CPUs [ 0.013589] CPU0 attaching sched-domain: [ 0.013598] domain 0: span 0-1 level CPU [ 0.013604] groups: 0 1 [ 0.013619] CPU1 attaching sched-domain: [ 0.013623] domain 0: span 0-1 level CPU [ 0.013628] groups: 1 0 [ 0.014301] devtmpfs: initialized [ 0.015253] regulator: core version 0.5 [ 0.015430] NET: Registered protocol family 16 [ 0.015728] Trying to unpack rootfs image as initramfs... [ 0.015832] MPC7450 family performance monitor hardware support registered [ 0.015876] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.015927] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.016176] PCI: Probing PCI hardware [ 0.016393] pci 0000:00:10.0: reg 10 32bit mmio: [0x92000000-0x92ffffff] [ 0.016404] pci 0000:00:10.0: reg 14 32bit mmio pref: [0xa0000000-0xafffffff] [ 0.016413] pci 0000:00:10.0: reg 18 32bit mmio: [0x91000000-0x91ffffff] [ 0.016433] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90000000-0x9001ffff] [ 0.016514] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.016747] pci 0001:10:15.0: reg 10 32bit mmio: [0x80087000-0x80087fff] [ 0.016788] pci 0001:10:15.0: supports D1 D2 [ 0.016793] pci 0001:10:15.0: PME# supported from D0 D1 D2 D3hot [ 0.016800] pci 0001:10:15.0: PME# disabled [ 0.016835] pci 0001:10:15.1: reg 10 32bit mmio: [0x80086000-0x80086fff] [ 0.016874] pci 0001:10:15.1: supports D1 D2 [ 0.016878] pci 0001:10:15.1: PME# supported from D0 D1 D2 D3hot [ 0.016884] pci 0001:10:15.1: PME# disabled [ 0.016916] pci 0001:10:15.2: reg 10 32bit mmio: [0x80081000-0x800810ff] [ 0.016955] pci 0001:10:15.2: supports D1 D2 [ 0.016959] pci 0001:10:15.2: PME# supported from D0 D1 D2 D3hot [ 0.016965] pci 0001:10:15.2: PME# disabled [ 0.016996] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] [ 0.017044] pci 0001:10:18.0: reg 10 32bit mmio: [0x80085000-0x80085fff] [ 0.017096] pci 0001:10:19.0: reg 10 32bit mmio: [0x80084000-0x80084fff] [ 0.017157] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80083000-0x80083fff] [ 0.017195] pci 0001:10:1b.0: supports D1 D2 [ 0.017200] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017206] pci 0001:10:1b.0: PME# disabled [ 0.017239] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80082000-0x80082fff] [ 0.017278] pci 0001:10:1b.1: supports D1 D2 [ 0.017283] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017289] pci 0001:10:1b.1: PME# disabled [ 0.017323] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff] [ 0.017362] pci 0001:10:1b.2: supports D1 D2 [ 0.017367] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.017373] pci 0001:10:1b.2: PME# disabled [ 0.017425] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58 [ 0.017487] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 0.017517] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.017582] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 [ 0.018181] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff] [ 0.018233] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] [ 0.018268] pci 0002:20:0e.0: supports D1 D2 [ 0.018273] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.018278] pci 0002:20:0e.0: PME# disabled [ 0.018300] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] [ 0.018322] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff] [ 0.018378] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.018401] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.018426] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.018752] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] [ 0.018758] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] [ 0.018764] pci_bus 0000:00: resource 2 mem: [0x90000000-0xafffffff] [ 0.018769] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] [ 0.018774] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] [ 0.018780] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff] [ 0.018785] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff] [ 0.018790] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff] [ 0.020721] bio: create slab at 0 [ 0.021145] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.021178] vgaarb: loaded [ 0.021471] SCSI subsystem initialized [ 0.021659] libata version 3.00 loaded. [ 0.021840] usbcore: registered new interface driver usbfs [ 0.021882] usbcore: registered new interface driver hub [ 0.021948] usbcore: registered new device driver usb [ 0.022265] NetLabel: Initializing [ 0.022270] NetLabel: domain hash size = 128 [ 0.022274] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.022307] NetLabel: unlabeled traffic allowed by default [ 0.022316] Switching to clocksource timebase [ 0.027148] AppArmor: AppArmor Filesystem Enabled [ 0.027646] NET: Registered protocol family 2 [ 0.027843] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.028607] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.030135] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.030920] TCP: Hash tables configured (established 131072 bind 65536) [ 0.030927] TCP reno registered [ 0.031187] NET: Registered protocol family 1 [ 0.031317] Thermal assist unit not available [ 0.031812] audit: initializing netlink socket (disabled) [ 0.031845] type=2000 audit(1274489044.024:1): initialized [ 0.043678] highmem bounce pool size: 64 pages [ 0.058081] VFS: Disk quotas dquot_6.5.2 [ 0.058231] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.059104] fuse init (API version 7.13) [ 0.059339] msgmni has been set to 1460 [ 0.060028] alg: No test for stdrng (krng) [ 0.060116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.060123] io scheduler noop registered [ 0.060127] io scheduler anticipatory registered [ 0.060132] io scheduler deadline registered [ 0.060215] io scheduler cfq registered (default) [ 0.064134] Generic non-volatile memory driver v1.1 [ 0.064608] Using unsupported 1280x1024 NVDA,Display-B at a0020000, depth=8, pitch=1536 [ 0.085262] Console: switching to colour frame buffer device 160x64 [ 0.105520] fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-B@1 [ 0.108122] brd: module loaded [ 0.108205] MacIO PCI driver attached to Keylargo chipset [ 0.108585] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 0.108760] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 0.108775] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 0.108847] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 0.108862] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 0.108936] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 0.108951] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 0.108965] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 0.109061] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 0.109076] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 0.109090] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.109439] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.109767] Uniform Multi-Platform E-IDE driver [ 0.109969] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002) [ 0.110115] adb: starting probe task... [ 0.110128] adb: finished probe task... [ 0.334975] Freeing initrd memory: 8880k freed [ 1.126524] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 1.126563] Probing IDE interface ide0... [ 1.414675] hda: Hitachi HDP725050GLAT80, ATA DISK drive [ 1.750490] hdb: IBM-IC35L120AVV207-1, ATA DISK drive [ 1.750622] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.750774] hda: UDMA/100 mode selected [ 1.750912] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.751079] hdb: UDMA/100 mode selected [ 1.751292] ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 39 [ 2.770502] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19 [ 2.770525] Probing IDE interface ide1... [ 3.338573] ide1 at 0xf1026000-0xf1026070,0xf1026160 on irq 19 [ 4.358513] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20 [ 4.358541] Probing IDE interface ide2... [ 4.754658] hde: PIONEER DVD-RW DVR-105, ATAPI CD/DVD-ROM drive [ 5.426546] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.426721] hde: MWDMA2 mode selected [ 5.426818] ide2 at 0xf102e000-0xf102e070,0xf102e160 on irq 20 [ 5.426942] ide-gd driver 1.18 [ 5.427002] hda: max request size: 512KiB [ 5.458650] hda: 976773168 sectors (500107 MB) w/7174KiB Cache, CHS=60801/255/63 [ 5.458811] hda: cache flushes supported [ 5.458969] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 [ 5.464319] hdb: max request size: 512KiB [ 5.482661] hdb: 240121728 sectors (122942 MB) w/7965KiB Cache, CHS=16383/255/63 [ 5.482869] hdb: cache flushes supported [ 5.482961] hdb: [mac] hdb1 hdb2 hdb3 hdb4 hdb5 hdb6 [ 5.488867] ide-cd driver 5.00 [ 5.495198] ide-cd: hde: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache [ 5.495215] Uniform CD-ROM driver Revision: 3.20 [ 5.513471] Fixed MDIO Bus: probed [ 5.513487] tun: Universal TUN/TAP device driver, 1.6 [ 5.513492] tun: (C) 1999-2004 Max Krasnyansky [ 5.513705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.513760] ehci_hcd 0001:10:15.2: enabling device (0004 -> 0006) [ 5.513784] ehci_hcd 0001:10:15.2: EHCI Host Controller [ 5.513866] ehci_hcd 0001:10:15.2: new USB bus registered, assigned bus number 1 [ 5.534521] ehci_hcd 0001:10:15.2: irq 58, io mem 0x80081000 [ 5.546497] ehci_hcd 0001:10:15.2: USB 2.0 started, EHCI 1.00 [ 5.546733] usb usb1: configuration #1 chosen from 1 choice [ 5.546809] hub 1-0:1.0: USB hub found [ 5.546835] hub 1-0:1.0: 5 ports detected [ 5.546992] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 5.547009] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 5.547101] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 2 [ 5.570517] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 5.582496] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 5.582708] usb usb2: configuration #1 chosen from 1 choice [ 5.582788] hub 2-0:1.0: USB hub found [ 5.582807] hub 2-0:1.0: 5 ports detected [ 5.582965] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.583016] ohci_hcd 0001:10:15.0: enabling device (0000 -> 0002) [ 5.583034] ohci_hcd 0001:10:15.0: OHCI Host Controller [ 5.583136] ohci_hcd 0001:10:15.0: new USB bus registered, assigned bus number 3 [ 5.583162] ohci_hcd 0001:10:15.0: irq 58, io mem 0x80087000 [ 5.658417] usb usb3: configuration #1 chosen from 1 choice [ 5.658497] hub 3-0:1.0: USB hub found [ 5.658521] hub 3-0:1.0: 3 ports detected [ 5.658629] ohci_hcd 0001:10:15.1: enabling device (0000 -> 0002) [ 5.658646] ohci_hcd 0001:10:15.1: OHCI Host Controller [ 5.658734] ohci_hcd 0001:10:15.1: new USB bus registered, assigned bus number 4 [ 5.658760] ohci_hcd 0001:10:15.1: irq 58, io mem 0x80086000 [ 5.734381] usb usb4: configuration #1 chosen from 1 choice [ 5.734443] hub 4-0:1.0: USB hub found [ 5.734463] hub 4-0:1.0: 2 ports detected [ 5.734574] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 5.734603] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 5.734632] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 5.734649] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 5.734737] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 5 [ 5.734762] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80083000 [ 5.810374] usb usb5: configuration #1 chosen from 1 choice [ 5.810438] hub 5-0:1.0: USB hub found [ 5.810459] hub 5-0:1.0: 3 ports detected [ 5.810587] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 5.810604] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 5.810724] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 6 [ 5.810748] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80082000 [ 5.867496] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 5.886372] usb usb6: configuration #1 chosen from 1 choice [ 5.886435] hub 6-0:1.0: USB hub found [ 5.886456] hub 6-0:1.0: 2 ports detected [ 5.886603] uhci_hcd: USB Universal Host Controller Interface driver [ 5.887066] mice: PS/2 mouse device common for all mice [ 5.887181] PowerMac i2c bus pmu 2 registered [ 5.887230] PowerMac i2c bus pmu 1 registered [ 5.887277] PowerMac i2c bus mac-io 0 registered [ 5.887341] PowerMac i2c bus uni-n 1 registered [ 5.887406] PowerMac i2c bus uni-n 0 registered [ 5.888865] TCP cubic registered [ 5.888874] NET: Registered protocol family 17 [ 5.889174] registered taskstats version 1 [ 5.889646] input: PMU as /devices/virtual/input/input1 [ 5.889669] /build/buildd/linux-2.6.32/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 5.889708] Freeing unused kernel memory: 364k init [ 5.941262] udev: starting version 151 [ 6.004191] usb 1-2: configuration #1 chosen from 1 choice [ 6.004856] hub 1-2:1.0: USB hub found [ 6.004997] hub 1-2:1.0: 4 ports detected [ 6.173504] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 6.238953] PHY ID: 2060e1, addr: 0 [ 6.240141] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9f:37:7c [ 6.240148] eth0: Found BCM5421 PHY [ 6.240267] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002) [ 6.297535] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[4096] IR/IT contexts=[8/8] [ 6.430553] usb 3-3: new full speed USB device using ohci_hcd and address 2 [ 6.492910] EXT4-fs (hdb3): mounted filesystem with ordered data mode [ 6.644447] usb 3-3: configuration #1 chosen from 1 choice [ 7.066526] usb 5-1: new full speed USB device using ohci_hcd and address 2 [ 7.279600] usb 5-1: configuration #1 chosen from 1 choice [ 7.282392] hub 5-1:1.0: USB hub found [ 7.285326] hub 5-1:1.0: 3 ports detected [ 7.386700] usb 1-2.2: new high speed USB device using ehci_hcd and address 4 [ 7.480445] usb 1-2.2: configuration #1 chosen from 1 choice [ 7.480845] hub 1-2.2:1.0: USB hub found [ 7.481150] hub 1-2.2:1.0: 4 ports detected [ 7.583497] ieee1394: Host added: ID:BUS[0-01:1023] GUID[000a95fffe9f377c] [ 7.588294] usb 5-1.1: new full speed USB device using ohci_hcd and address 3 [ 7.703568] usb 5-1.1: configuration #1 chosen from 1 choice [ 7.781273] usb 5-1.2: new low speed USB device using ohci_hcd and address 4 [ 7.894633] usb 5-1.2: configuration #1 chosen from 1 choice [ 9.838866] eth0: Link is up at 1000 Mbps, full-duplex. [ 16.464884] Adding 4920312k swap on /dev/hdb4. Priority:-1 extents:1 across:4920312k [ 16.511663] udev: starting version 151 [ 16.717184] Linux agpgart interface v0.103 [ 17.037583] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 17.038383] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 17.039590] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 17.039839] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 17.049747] [drm] Initialized drm 1.1.0 20060810 [ 17.085248] type=1505 audit(1274489061.075:2): operation="profile_load" pid=447 name="/sbin/dhclient3" [ 17.085849] type=1505 audit(1274489061.075:3): operation="profile_load" pid=447 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.086164] type=1505 audit(1274489061.075:4): operation="profile_load" pid=447 name="/usr/lib/connman/scripts/dhclient-script" [ 17.132723] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 17.132894] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 17.134104] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 17.135814] Bluetooth: Core ver 2.15 [ 17.148679] NET: Registered protocol family 31 [ 17.148689] Bluetooth: HCI device and connection manager initialized [ 17.148698] Bluetooth: HCI socket layer initialized [ 17.207518] usbcore: registered new interface driver hiddev [ 17.221495] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input2 [ 17.221989] generic-usb 0003:05AC:0204.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-1.1/input0 [ 17.231632] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input3 [ 17.231873] generic-usb 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-1.1/input1 [ 17.240683] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 17.241382] usbcore: registered new interface driver btusb [ 17.244781] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0001:10/0001:10:1b.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input4 [ 17.245075] generic-usb 0003:046D:C045.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.0-1.2/input0 [ 17.245149] usbcore: registered new interface driver usbhid [ 17.245156] usbhid: v2.6:USB HID core driver [ 17.557250] [drm] nouveau 0000:00:10.0: Detected an NV40 generation card (0x043100a4) [ 17.557675] [drm] nouveau 0000:00:10.0: OF bios successfully copied (6447 bytes) [ 17.557754] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM [ 17.557799] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 17.557803] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN [ 17.628671] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 17.628680] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM [ 17.640931] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 17.640945] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN [ 17.711062] [drm] nouveau 0000:00:10.0: BIT BIOS found [ 17.711072] [drm] nouveau 0000:00:10.0: Bios version 05.43.02.75 [ 17.711085] [drm] nouveau 0000:00:10.0: BIT table 'd' not found [ 17.711092] [drm] nouveau 0000:00:10.0: Found Display Configuration Block version 3.0 [ 17.711101] [drm] nouveau 0000:00:10.0: DCB connector table: VHER 0x30 5 7 2 [ 17.711108] [drm] nouveau 0000:00:10.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 17.711115] [drm] nouveau 0000:00:10.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 17.711122] [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 01000100 00000028 [ 17.711131] [drm] nouveau 0000:00:10.0: Raw DCB entry 1: 03000102 00000000 [ 17.711136] [drm] nouveau 0000:00:10.0: Raw DCB entry 2: 04011210 00000028 [ 17.711142] [drm] nouveau 0000:00:10.0: Raw DCB entry 3: 04011212 00000000 [ 17.711147] [drm] nouveau 0000:00:10.0: Raw DCB entry 4: 02011211 0020c070 [ 17.711168] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x0744 [ 17.711459] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0B87 [ 17.767767] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x105B [ 17.767822] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x1195 [ 17.791577] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x1273 [ 17.800083] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 17.800139] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 17.800165] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 33 [ 17.824303] [TTM] Zone kernel: Available graphics memory: 378382 kiB. [ 17.824313] [TTM] Zone highmem: Available graphics memory: 1033742 kiB. [ 17.824347] [drm] nouveau 0000:00:10.0: 256 MiB VRAM [ 17.827102] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture) [ 17.827342] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0 [ 17.837728] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0 [ 17.837755] [drm] nouveau 0000:00:10.0: Initial CRTC_OWNER is 0 [ 17.837920] [drm] nouveau 0000:00:10.0: Detected a DVI-I connector [ 17.840377] snd-aoa-fabric-layout: Using direct GPIOs [ 17.840524] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 17.840541] irq: irq 60 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 60 [ 17.840556] irq: irq 50 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 50 [ 17.840616] [drm] nouveau 0000:00:10.0: Detected a DVI-I connector [ 17.842093] [drm] nouveau 0000:00:10.0: Detected a TV connector [ 17.845139] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 0) [ 17.845149] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on tmds encoder (output 1) [ 17.845157] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 2) [ 17.845164] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on tmds encoder (output 3) [ 17.845170] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 4) [ 17.849095] snd: can't request rsrc 0 (Sound Control: 0x0000000080010000:0000000080010fff) [ 17.901755] apm_emu: PMU APM Emulation initialized. [ 17.905936] snd-aoa-codec-tas: found 'deq' node [ 17.907478] snd-aoa-fabric-layout: can use this codec [ 17.974249] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a [ 17.991720] DS1775 digital thermometer [@49] [ 17.991731] Temp: 30.5 C Hyst: 75.0 C OS: 80.0 C [ 17.993266] ADM1030 fan controller [@2c] [ 18.016918] Reducing overheating limit to 75.0 C (Hyst: 70.0 C) [ 18.044019] eth0: Link is up at 1000 Mbps, full-duplex. [ 18.044032] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 18.126386] type=1505 audit(1274489062.115:5): operation="profile_load" pid=655 name="/usr/share/gdm/guest-session/Xsession" [ 18.147957] type=1505 audit(1274489062.139:6): operation="profile_replace" pid=657 name="/sbin/dhclient3" [ 18.148547] type=1505 audit(1274489062.139:7): operation="profile_replace" pid=657 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.148888] type=1505 audit(1274489062.139:8): operation="profile_replace" pid=657 name="/usr/lib/connman/scripts/dhclient-script" [ 18.162127] type=1505 audit(1274489062.151:9): operation="profile_load" pid=659 name="/usr/bin/evince" [ 18.176678] type=1505 audit(1274489062.168:10): operation="profile_load" pid=659 name="/usr/bin/evince-previewer" [ 18.182081] type=1505 audit(1274489062.171:11): operation="profile_load" pid=659 name="/usr/bin/evince-thumbnailer" [ 18.283891] [drm] nouveau 0000:00:10.0: allocated 1280x1024 fb: 0x49000, bo ed084e00 [ 18.283913] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver [ 18.284166] Console: switching to colour dummy device 80x25 [ 18.284508] Trying to free nonexistent resource <00000000a0020000-00000000a019ffff> [ 18.285034] Console: switching to colour frame buffer device 160x64 [ 18.295279] [drm] nouveau 0000:00:10.0: Output DVI-I-2 is running on CRTC 1 using output C [ 18.295291] [drm] nouveau 0000:00:10.0: 0x14F6: Parsing digital output script table [ 18.351614] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on tmds encoder (output 3) [ 18.351629] [drm] nouveau 0000:00:10.0: Output DVI-I-2 is running on CRTC 1 using output C [ 18.353061] fb0: nouveaufb frame buffer device [ 18.353067] registered panic notifier [ 18.353084] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:10.0 on minor 0