[78229.990361] hub 2-0:1.0: unable to enumerate USB device on port 1 [78230.210388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78230.430390] hub 2-0:1.0: unable to enumerate USB device on port 1 [78230.650389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78230.870389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78231.150064] usb 2-1: new high speed USB device using ehci_hcd and address 58 [78231.220362] hub 2-0:1.0: unable to enumerate USB device on port 1 [78231.500082] usb 2-1: new high speed USB device using ehci_hcd and address 59 [78231.570362] hub 2-0:1.0: unable to enumerate USB device on port 1 [78231.790363] hub 2-0:1.0: unable to enumerate USB device on port 1 [78232.010386] hub 2-0:1.0: unable to enumerate USB device on port 1 [78232.230386] hub 2-0:1.0: unable to enumerate USB device on port 1 [78232.450389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78232.670387] hub 2-0:1.0: unable to enumerate USB device on port 1 [78232.890363] hub 2-0:1.0: unable to enumerate USB device on port 1 [78233.110388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78233.330391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78233.550391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78233.770387] hub 2-0:1.0: unable to enumerate USB device on port 1 [78233.990371] hub 2-0:1.0: unable to enumerate USB device on port 1 [78234.270057] usb 2-1: new high speed USB device using ehci_hcd and address 71 [78234.340357] hub 2-0:1.0: unable to enumerate USB device on port 1 [78234.560259] hub 2-0:1.0: unable to enumerate USB device on port 1 [78234.780392] hub 2-0:1.0: unable to enumerate USB device on port 1 [78235.000388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78235.220389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78235.440393] hub 2-0:1.0: unable to enumerate USB device on port 1 [78235.660398] hub 2-0:1.0: unable to enumerate USB device on port 1 [78235.880391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78236.100391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78236.320393] hub 2-0:1.0: unable to enumerate USB device on port 1 [78236.540389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78236.760391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78236.980385] hub 2-0:1.0: unable to enumerate USB device on port 1 [78237.200392] hub 2-0:1.0: unable to enumerate USB device on port 1 [78237.420386] hub 2-0:1.0: unable to enumerate USB device on port 1 [78237.640388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78237.860388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78238.081762] hub 2-0:1.0: unable to enumerate USB device on port 1 [78238.300397] hub 2-0:1.0: unable to enumerate USB device on port 1 [78238.520389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78238.740387] hub 2-0:1.0: unable to enumerate USB device on port 1 [78238.960389] hub 2-0:1.0: unable to enumerate USB device on port 1 [78239.180391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78239.400390] hub 2-0:1.0: unable to enumerate USB device on port 1 [78239.620392] hub 2-0:1.0: unable to enumerate USB device on port 1 [78239.840390] hub 2-0:1.0: unable to enumerate USB device on port 1 [78240.060391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78240.280268] hub 2-0:1.0: unable to enumerate USB device on port 1 [78240.780076] usb 6-1: new full speed USB device using uhci_hcd and address 13 [78240.910055] usb 6-1: device descriptor read/64, error -71 [78241.150075] usb 6-1: device descriptor read/64, error -71 [78241.380077] usb 6-1: new full speed USB device using uhci_hcd and address 14 [78241.450108] hub 6-0:1.0: unable to enumerate USB device on port 1 [78241.670405] hub 2-0:1.0: unable to enumerate USB device on port 1 [78241.890391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78242.110390] hub 2-0:1.0: unable to enumerate USB device on port 1 [78242.330388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78242.550391] hub 2-0:1.0: unable to enumerate USB device on port 1 [78242.770388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78242.990262] hub 2-0:1.0: unable to enumerate USB device on port 1 [78243.210363] hub 2-0:1.0: unable to enumerate USB device on port 1 [78243.430393] hub 2-0:1.0: unable to enumerate USB device on port 1 [78243.650388] hub 2-0:1.0: unable to enumerate USB device on port 1 [78244.210083] usb 6-1: new full speed USB device using uhci_hcd and address 15 [78244.280102] hub 6-0:1.0: unable to enumerate USB device on port 1 [78244.840069] usb 6-1: new full speed USB device using uhci_hcd and address 16 [78244.970076] usb 6-1: device descriptor read/64, error -71 [78245.210085] usb 6-1: device descriptor read/64, error -71 [78245.440069] usb 6-1: new full speed USB device using uhci_hcd and address 17 [78245.570066] usb 6-1: device descriptor read/64, error -71 [78245.810071] usb 6-1: device descriptor read/64, error -71 [78246.040076] usb 6-1: new full speed USB device using uhci_hcd and address 18 [78246.460067] usb 6-1: device not accepting address 18, error -71 [78246.580060] usb 6-1: new full speed USB device using uhci_hcd and address 19 [78247.000071] usb 6-1: device not accepting address 19, error -71 [78247.000102] hub 6-0:1.0: unable to enumerate USB device on port 1 [78253.100068] usb 2-1: new high speed USB device using ehci_hcd and address 112 [78253.262367] usb 2-1: device descriptor read/all, error -71 [78253.390083] usb 2-1: new high speed USB device using ehci_hcd and address 113 [78253.460374] hub 2-0:1.0: unable to enumerate USB device on port 1 [78253.940059] usb 6-1: new full speed USB device using uhci_hcd and address 20 [78254.010156] hub 6-0:1.0: unable to enumerate USB device on port 1 [78254.620056] usb 2-1: new high speed USB device using ehci_hcd and address 114 [78254.772053] scsi20 : usb-storage 2-1:1.0 [78255.771155] scsi: unknown device type 19 [78255.771162] scsi 20:0:0:0: Unknown P P | PW 8n PQ: 1 ANSI: 6 [78255.772494] scsi 20:0:0:0: Attached scsi generic sg4 type 19 [78276.556422] usb 2-1: USB disconnect, address 114 [78276.870099] usb 2-1: new high speed USB device using ehci_hcd and address 115 [78277.039176] scsi21 : usb-storage 2-1:1.0 [78278.041170] scsi 21:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [78278.048894] sd 21:0:0:0: [sdd] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) [78278.049842] sd 21:0:0:0: Attached scsi generic sg4 type 0 [78278.050373] sd 21:0:0:0: [sdd] Test WP failed, assume Write Enabled [78278.050380] sd 21:0:0:0: [sdd] Assuming drive cache: write through [78278.052511] sd 21:0:0:0: [sdd] Test WP failed, assume Write Enabled [78278.052516] sd 21:0:0:0: [sdd] Assuming drive cache: write through [78294.195683] sdd: sdd1 [78294.202911] sd 21:0:0:0: [sdd] Test WP failed, assume Write Enabled [78294.202917] sd 21:0:0:0: [sdd] Assuming drive cache: write through [78294.202923] sd 21:0:0:0: [sdd] Attached SCSI disk [79406.240077] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [79406.240087] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [79406.240111] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [79406.240113] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [79406.240118] ata2.00: status: { DRDY } [79406.240125] ata2: hard resetting link [79406.790065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [79406.803638] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79406.817584] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79406.817594] ata2.00: configured for UDMA/100 [79406.830085] ata2: EH complete [79484.160074] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [79484.160085] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [79484.160109] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [79484.160111] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [79484.160116] ata2.00: status: { DRDY } [79484.160122] ata2: hard resetting link [79484.710390] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [79484.723971] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79484.737923] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79484.737935] ata2.00: configured for UDMA/100 [79484.750095] ata2: EH complete [79502.902733] ISO 9660 Extensions: Microsoft Joliet Level 3 [79502.952256] ISOFS: changing to secondary root [79564.160081] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [79564.160090] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [79564.160105] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [79564.160106] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [79564.160109] ata2.00: status: { DRDY } [79564.160114] ata2: hard resetting link [79564.710067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [79564.723613] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79564.737508] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79564.737517] ata2.00: configured for UDMA/100 [79564.750081] ata2: EH complete [79698.065183] VFS: busy inodes on changed media or resized disk sr0 [79807.200077] ata2: limiting SATA link speed to 1.5 Gbps [79807.200084] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [79807.200094] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [79807.200110] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [79807.200111] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [79807.200114] ata2.00: status: { DRDY } [79807.200119] ata2: hard resetting link [79807.750071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [79807.781250] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79807.799216] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [79807.799227] ata2.00: configured for UDMA/100 [79807.822758] ata2: EH complete [79809.310928] ISO 9660 Extensions: Microsoft Joliet Level 3 [79809.314700] ISOFS: changing to secondary root [79811.148949] VFS: busy inodes on changed media or resized disk sr0 [79949.088664] VFS: busy inodes on changed media or resized disk sr0 [80036.160075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [80036.160086] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [80036.160110] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [80036.160112] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [80036.160117] ata2.00: status: { DRDY } [80036.160124] ata2: hard resetting link [80036.710075] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [80036.730585] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80036.748540] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80036.748550] ata2.00: configured for UDMA/100 [80036.770115] ata2: EH complete [80182.080164] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [80182.080175] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [80182.080199] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [80182.080201] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [80182.080206] ata2.00: status: { DRDY } [80182.080213] ata2: hard resetting link [80182.630086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [80182.643640] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80182.657582] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80182.657593] ata2.00: configured for UDMA/100 [80182.670108] ata2: EH complete [80201.117698] ISO 9660 Extensions: Microsoft Joliet Level 3 [80201.122290] ISOFS: changing to secondary root [80264.160071] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [80264.160080] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [80264.160094] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [80264.160095] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [80264.160099] ata2.00: status: { DRDY } [80264.160103] ata2: hard resetting link [80264.710084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [80264.723694] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80264.737632] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80264.737644] ata2.00: configured for UDMA/100 [80264.750085] ata2: EH complete [80386.080089] ata2.00: limiting speed to UDMA/66:PIO4 [80386.080095] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [80386.080102] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [80386.080119] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [80386.080120] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [80386.080123] ata2.00: status: { DRDY } [80386.080128] ata2: hard resetting link [80386.630088] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [80386.643674] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80386.657593] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80386.657604] ata2.00: configured for UDMA/66 [80386.670086] ata2: EH complete [80403.340910] ISO 9660 Extensions: Microsoft Joliet Level 3 [80403.342428] ISOFS: changing to secondary root [80777.006633] VFS: busy inodes on changed media or resized disk sr0 [80777.165770] sr 1:0:0:0: [sr0] Device not ready [80777.165775] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [80777.165779] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [80777.165785] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [80777.165793] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [80777.165803] end_request: I/O error, dev sr0, sector 88 [80777.166780] sr 1:0:0:0: [sr0] Device not ready [80777.166784] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [80777.166788] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [80777.166793] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [80777.166799] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [80777.166810] end_request: I/O error, dev sr0, sector 88 [80777.168620] sr 1:0:0:0: [sr0] Device not ready [80777.168627] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [80777.168631] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [80777.168635] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [80777.168641] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [80777.168650] end_request: I/O error, dev sr0, sector 88 [80878.250112] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [80878.250123] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [80878.250146] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [80878.250148] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [80878.250153] ata2.00: status: { DRDY } [80878.250161] ata2: hard resetting link [80878.800076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [80878.813579] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80878.827538] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [80878.827551] ata2.00: configured for UDMA/66 [80878.840127] ata2: EH complete [80883.834082] ISO 9660 Extensions: Microsoft Joliet Level 3 [80883.836483] ISOFS: changing to secondary root [81031.013508] VFS: busy inodes on changed media or resized disk sr0 [81120.160095] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [81120.160104] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [81120.160119] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [81120.160120] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [81120.160124] ata2.00: status: { DRDY } [81120.160128] ata2: hard resetting link [81120.710073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [81120.723658] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [81120.737544] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [81120.737553] ata2.00: configured for UDMA/66 [81120.750087] ata2: EH complete [81123.819039] ISO 9660 Extensions: Microsoft Joliet Level 3 [81125.626918] ISOFS: changing to secondary root [81663.592879] VFS: busy inodes on changed media or resized disk sr0 [81664.535718] sr 1:0:0:0: [sr0] Device not ready [81664.535722] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [81664.535726] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [81664.535731] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [81664.535737] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [81664.535746] end_request: I/O error, dev sr0, sector 88 [81664.536856] sr 1:0:0:0: [sr0] Device not ready [81664.536862] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [81664.536867] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [81664.536871] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [81664.536879] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [81664.536890] end_request: I/O error, dev sr0, sector 88 [81664.538225] sr 1:0:0:0: [sr0] Device not ready [81664.538229] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [81664.538232] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [81664.538237] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [81664.538242] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [81664.538252] end_request: I/O error, dev sr0, sector 88 [81748.160065] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [81748.160074] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [81748.160089] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [81748.160090] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [81748.160094] ata2.00: status: { DRDY } [81748.160099] ata2: hard resetting link [81748.710078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [81748.723576] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [81748.737430] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [81748.737441] ata2.00: configured for UDMA/66 [81748.750103] ata2: EH complete [82380.160082] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [82380.160091] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [82380.160106] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [82380.160107] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [82380.160110] ata2.00: status: { DRDY } [82380.160114] ata2: hard resetting link [82380.710058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [82380.723607] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [82380.737464] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [82380.737473] ata2.00: configured for UDMA/66 [82380.750083] ata2: EH complete [82385.688537] ISO 9660 Extensions: Microsoft Joliet Level 3 [82385.690993] ISOFS: changing to secondary root [82772.587091] VFS: busy inodes on changed media or resized disk sr0 [82773.152251] sr 1:0:0:0: [sr0] Device not ready [82773.152258] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [82773.152262] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [82773.152266] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [82773.152274] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [82773.152285] end_request: I/O error, dev sr0, sector 88 [82773.194877] sr 1:0:0:0: [sr0] Device not ready [82773.194882] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [82773.194887] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [82773.194892] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [82773.194899] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [82773.194911] end_request: I/O error, dev sr0, sector 88 [82866.160079] usb 2-1: reset high speed USB device using ehci_hcd and address 115 [82869.120058] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [82869.120066] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [82869.120083] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [82869.120084] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [82869.120087] ata2.00: status: { DRDY } [82869.120092] ata2: hard resetting link [82869.670055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [82869.683549] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [82869.697391] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [82869.697402] ata2.00: configured for UDMA/66 [82869.710081] ata2: EH complete [82872.840417] ISO 9660 Extensions: Microsoft Joliet Level 3 [82874.632338] ISOFS: changing to secondary root [83214.325374] VFS: busy inodes on changed media or resized disk sr0 [83214.494965] sr 1:0:0:0: [sr0] Device not ready [83214.494970] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.494974] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.494979] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.494985] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.494997] end_request: I/O error, dev sr0, sector 88 [83214.496089] sr 1:0:0:0: [sr0] Device not ready [83214.496092] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.496097] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.496101] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.496108] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.496117] end_request: I/O error, dev sr0, sector 88 [83214.497174] sr 1:0:0:0: [sr0] Device not ready [83214.497178] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.497183] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.497188] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.497194] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.497204] end_request: I/O error, dev sr0, sector 88 [83214.498337] sr 1:0:0:0: [sr0] Device not ready [83214.498341] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.498344] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.498349] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.498355] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.498364] end_request: I/O error, dev sr0, sector 88 [83214.499699] sr 1:0:0:0: [sr0] Device not ready [83214.499704] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.499710] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.499714] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.499720] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.499730] end_request: I/O error, dev sr0, sector 88 [83214.501414] sr 1:0:0:0: [sr0] Device not ready [83214.501420] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.501424] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.501429] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.501435] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.501445] end_request: I/O error, dev sr0, sector 88 [83214.502531] sr 1:0:0:0: [sr0] Device not ready [83214.502536] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.502540] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.502544] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.502552] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.502561] end_request: I/O error, dev sr0, sector 88 [83214.503900] sr 1:0:0:0: [sr0] Device not ready [83214.503904] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.503908] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.503912] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.503919] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.503928] end_request: I/O error, dev sr0, sector 88 [83214.505016] sr 1:0:0:0: [sr0] Device not ready [83214.505020] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.505023] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.505028] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.505036] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.505045] end_request: I/O error, dev sr0, sector 88 [83214.506020] sr 1:0:0:0: [sr0] Device not ready [83214.506027] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.506031] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.506036] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.506043] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.506052] end_request: I/O error, dev sr0, sector 88 [83214.507093] sr 1:0:0:0: [sr0] Device not ready [83214.507098] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.507103] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.507107] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.507114] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.507123] end_request: I/O error, dev sr0, sector 88 [83214.508104] sr 1:0:0:0: [sr0] Device not ready [83214.508108] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.508111] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.508115] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.508122] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.508131] end_request: I/O error, dev sr0, sector 88 [83214.509104] sr 1:0:0:0: [sr0] Device not ready [83214.509108] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.509112] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.509116] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.509122] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.509131] end_request: I/O error, dev sr0, sector 88 [83214.510444] sr 1:0:0:0: [sr0] Device not ready [83214.510449] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.510453] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.510457] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.510463] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.510472] end_request: I/O error, dev sr0, sector 88 [83214.512546] sr 1:0:0:0: [sr0] Device not ready [83214.512550] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.512554] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.512559] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.512568] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.512576] end_request: I/O error, dev sr0, sector 88 [83214.514141] sr 1:0:0:0: [sr0] Device not ready [83214.514146] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.514150] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.514155] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.514162] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.514171] end_request: I/O error, dev sr0, sector 88 [83214.515268] sr 1:0:0:0: [sr0] Device not ready [83214.515272] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.515277] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.515281] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.515289] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.515297] end_request: I/O error, dev sr0, sector 88 [83214.516403] sr 1:0:0:0: [sr0] Device not ready [83214.516407] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.516411] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.516416] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.516421] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.516430] end_request: I/O error, dev sr0, sector 88 [83214.563803] sr 1:0:0:0: [sr0] Device not ready [83214.563807] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.563811] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.563815] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.563821] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.563831] end_request: I/O error, dev sr0, sector 88 [83214.565931] sr 1:0:0:0: [sr0] Device not ready [83214.565938] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.565942] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.565947] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.565952] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.565962] end_request: I/O error, dev sr0, sector 88 [83214.567100] sr 1:0:0:0: [sr0] Device not ready [83214.567105] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [83214.567109] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [83214.567114] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [83214.567120] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [83214.567129] end_request: I/O error, dev sr0, sector 88 [83305.120068] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [83305.120077] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [83305.120092] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [83305.120094] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [83305.120097] ata2.00: status: { DRDY } [83305.120102] ata2: hard resetting link [83305.670053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [83305.683611] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83305.697528] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83305.697539] ata2.00: configured for UDMA/66 [83305.710099] ata2: EH complete [83308.852800] ISO 9660 Extensions: Microsoft Joliet Level 3 [83310.690443] ISOFS: changing to secondary root [83795.253017] VFS: busy inodes on changed media or resized disk sr0 [83882.080096] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [83882.080107] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [83882.080130] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [83882.080132] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [83882.080137] ata2.00: status: { DRDY } [83882.080144] ata2: hard resetting link [83882.630071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [83882.643608] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83882.657550] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83882.657562] ata2.00: configured for UDMA/66 [83882.670081] ata2: EH complete [83986.080081] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [83986.080088] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [83986.080105] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [83986.080106] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [83986.080110] ata2.00: status: { DRDY } [83986.080115] ata2: hard resetting link [83986.630067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [83986.643641] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83986.657598] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83986.657609] ata2.00: configured for UDMA/66 [83986.670082] ata2: EH complete [83991.573981] ISO 9660 Extensions: Microsoft Joliet Level 3 [83991.576416] ISOFS: changing to secondary root [84532.271221] VFS: busy inodes on changed media or resized disk sr0 [84532.839529] sr 1:0:0:0: [sr0] Device not ready [84532.839533] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [84532.839538] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [84532.839543] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [84532.839551] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 16 00 00 01 00 [84532.839560] end_request: I/O error, dev sr0, sector 88 [84619.200097] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [84619.200108] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [84619.200124] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [84619.200126] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [84619.200164] ata2.00: status: { DRDY } [84619.200171] ata2: hard resetting link [84619.750071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [84619.782437] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [84619.935249] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [84619.935265] ata2.00: configured for UDMA/66 [84620.030113] ata2: EH complete [84625.634543] sr 1:0:0:0: [sr0] Media Changed [84625.634549] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [84625.634553] sr 1:0:0:0: [sr0] Sense Key : Unit Attention [current] [84625.634557] sr 1:0:0:0: [sr0] Add. Sense: Not ready to ready change, medium may have changed [84625.634563] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 10 00 00 01 00 [84625.634572] end_request: I/O error, dev sr0, sector 64 [84625.634605] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 [84730.080066] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [84730.080074] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [84730.080090] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [84730.080091] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [84730.080094] ata2.00: status: { DRDY } [84730.080100] ata2: hard resetting link [84730.630076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [84730.643617] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [84730.657517] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [84730.657527] ata2.00: configured for UDMA/66 [84730.670091] ata2: EH complete [84733.684670] ISO 9660 Extensions: Microsoft Joliet Level 3 [84735.519977] ISOFS: changing to secondary root [85191.363996] VFS: busy inodes on changed media or resized disk sr0 [85280.160131] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [85280.160142] sr 1:0:0:0: [sr0] CDB: Volume set (in), Read cd: be 00 ff ff ff ff 00 00 01 10 00 00 [85280.160166] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [85280.160168] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout) [85280.160173] ata2.00: status: { DRDY } [85280.160180] ata2: hard resetting link [85280.710059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [85280.723592] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [85280.737509] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [85280.737519] ata2.00: configured for UDMA/66 [85280.750088] ata2: EH complete [85779.006055] VFS: busy inodes on changed media or resized disk sr0 [85779.366481] sr 1:0:0:0: [sr0] Device not ready [85779.366487] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [85779.366493] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [85779.366499] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [85779.366506] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 12 00 00 01 00 [85779.366517] end_request: I/O error, dev sr0, sector 72 [85779.380174] sr 1:0:0:0: [sr0] Device not ready [85779.380179] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [85779.380183] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [85779.380188] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [85779.380194] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 12 00 00 01 00 [85779.380204] end_request: I/O error, dev sr0, sector 72 [85779.381117] sr 1:0:0:0: [sr0] Device not ready [85779.381121] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [85779.381125] sr 1:0:0:0: [sr0] Sense Key : Not Ready [current] [85779.381129] sr 1:0:0:0: [sr0] Add. Sense: Medium not present - tray open [85779.381135] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 12 00 00 01 00 [85779.381143] end_request: I/O error, dev sr0, sector 72 [89780.190097] usb 2-5: USB disconnect, address 13 [89784.900518] usb 2-1: USB disconnect, address 115 [90791.879435] wlan0: deauthenticating from 00:0c:41:e2:f9:75 by local choice (reason=3) [90791.990183] cfg80211: All devices are disconnected, going to restore regulatory settings [90791.990190] cfg80211: Restoring regulatory settings [90791.990197] cfg80211: Calling CRDA to update world regulatory domain [90792.073730] bridge-wlan0: disabling the bridge on dev down [90792.120125] bridge-wlan0: down [90792.126855] bridge-wlan0: detached [90792.171585] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [90792.171603] /dev/vmnet: hub 0 does not exist, allocating memory. [90792.171627] /dev/vmnet: port on hub 0 successfully opened [90792.171649] bridge-wlan0: attached [90792.171728] bridge-wlan0: detached [90793.016818] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [90793.016823] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016826] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [90793.016829] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016832] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [90793.016834] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016837] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [90793.016839] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016842] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [90793.016844] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016847] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [90793.016850] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016852] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [90793.016856] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016858] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [90793.016861] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016863] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [90793.016866] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016868] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [90793.016871] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016873] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [90793.016876] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [90793.016878] cfg80211: Disabling freq 2467 MHz [90793.016880] cfg80211: Disabling freq 2472 MHz [90793.016882] cfg80211: Disabling freq 2484 MHz [90793.016886] cfg80211: World regulatory domain updated: [90793.016887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [90793.016891] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [90793.016893] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [90793.016896] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [90793.016899] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [90793.016902] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [90797.242245] PM: Syncing filesystems ... done. [90797.260130] PM: Preparing system for mem sleep [90797.700203] Freezing user space processes ... (elapsed 0.01 seconds) done. [90797.720100] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [90797.740084] PM: Entering mem sleep [90797.740140] Suspending console(s) (use no_console_suspend to debug) [90797.758335] sd 0:0:0:0: [sda] Synchronizing SCSI cache [90797.758427] sd 0:0:0:0: [sda] Stopping disk [90797.847735] i8042 aux 00:08: wake-up capability disabled by ACPI [90797.853234] i8042 kbd 00:07: wake-up capability enabled by ACPI [90797.853365] ehci_hcd 0000:00:1d.7: PCI INT B disabled [90797.853378] uhci_hcd 0000:00:1d.2: PCI INT D disabled [90797.853390] uhci_hcd 0000:00:1d.1: PCI INT C disabled [90797.853402] uhci_hcd 0000:00:1d.0: PCI INT B disabled [90797.853418] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [90797.853435] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [90797.853673] ehci_hcd 0000:00:1a.7: PCI INT D disabled [90797.853685] uhci_hcd 0000:00:1a.2: PCI INT C disabled [90797.853695] uhci_hcd 0000:00:1a.1: PCI INT B disabled [90797.853706] uhci_hcd 0000:00:1a.0: PCI INT A disabled [90797.960364] HDA Intel 0000:00:1b.0: PCI INT A disabled [90797.960402] ACPI handle has no context! [90797.980016] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 126.574 msecs [90798.669880] PM: suspend of drv:sd dev:0:0:0:0 complete after 911.549 msecs [90798.669894] PM: suspend of drv:scsi dev:target0:0:0 complete after 911.524 msecs [90798.669916] PM: suspend of drv:scsi dev:host0 complete after 911.361 msecs [90798.690015] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 836.692 msecs [90798.690035] PM: suspend of drv: dev:pci0000:00 complete after 835.938 msecs [90798.690045] PM: suspend of devices complete after 949.319 msecs [90798.690048] PM: suspend devices took 0.950 seconds [90798.710106] r8169 0000:01:00.0: PME# enabled [90798.760022] r8169 0000:01:00.0: wake-up capability enabled by ACPI [90798.820336] PM: late suspend of devices complete after 130.283 msecs [90798.820484] ACPI: Preparing to enter system sleep state S3 [90799.070085] PM: Saving platform NVS memory [90799.071307] Disabling non-boot CPUs ... [90799.180034] CPU 1 is now offline [90799.180490] Back to C! [90799.180490] PM: Restoring platform NVS memory [90799.180490] Enabling non-boot CPUs ... [90799.180490] Booting Node 0 Processor 1 APIC 0x1 [90799.350618] Switched to NOHz mode on CPU #1 [90799.362658] CPU1 is up [90799.363844] ACPI: Waking up from system sleep state S3 [90799.660239] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [90799.660246] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [90799.660303] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [90799.660339] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [90799.660374] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [90799.660415] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [90799.660461] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [90799.660467] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [90799.660510] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [90799.660516] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [90799.660574] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [90799.660580] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [90799.660634] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [90799.660669] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [90799.660704] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [90799.660745] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [90799.660776] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [90799.660781] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [90799.660786] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [90799.660797] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [90799.660881] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [90799.660944] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [90799.660965] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [90799.661041] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [90799.661696] PM: early resume of devices complete after 1.591 msecs [90799.661779] i915 0000:00:02.0: setting latency timer to 64 [90799.661885] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [90799.661891] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [90799.661916] usb usb3: root hub lost power or was reset [90799.661930] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [90799.661936] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [90799.661960] usb usb4: root hub lost power or was reset [90799.661972] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [90799.661977] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [90799.662001] usb usb5: root hub lost power or was reset [90799.662023] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [90799.662034] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [90799.662087] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [90799.662093] HDA Intel 0000:00:1b.0: setting latency timer to 64 [90799.662140] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [90799.662187] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [90799.662198] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [90799.662206] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [90799.662212] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [90799.662237] usb usb6: root hub lost power or was reset [90799.662250] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [90799.662256] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [90799.662279] usb usb7: root hub lost power or was reset [90799.662292] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [90799.662298] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [90799.662322] usb usb8: root hub lost power or was reset [90799.662336] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [90799.662342] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [90799.662385] pci 0000:00:1e.0: setting latency timer to 64 [90799.662403] ahci 0000:00:1f.2: setting latency timer to 64 [90799.663393] sd 0:0:0:0: [sda] Starting disk [90799.790142] PM: resume of drv:usb dev:usb3 complete after 127.356 msecs [90799.790169] PM: resume of drv:usb dev:usb4 complete after 127.308 msecs [90799.790192] PM: resume of drv:usb dev:usb5 complete after 127.252 msecs [90799.790215] PM: resume of drv:usb dev:usb6 complete after 127.198 msecs [90799.790237] PM: resume of drv:usb dev:usb7 complete after 127.139 msecs [90799.790259] PM: resume of drv:usb dev:usb8 complete after 127.079 msecs [90799.790270] PM: resume of drv:hub dev:3-0:1.0 complete after 127.466 msecs [90799.790277] PM: resume of drv: dev:ep_00 complete after 127.436 msecs [90799.790283] PM: resume of drv:hub dev:4-0:1.0 complete after 127.401 msecs [90799.790291] PM: resume of drv: dev:ep_00 complete after 127.371 msecs [90799.790296] PM: resume of drv:hub dev:5-0:1.0 complete after 127.335 msecs [90799.790303] PM: resume of drv: dev:ep_00 complete after 127.305 msecs [90799.790309] PM: resume of drv:hub dev:6-0:1.0 complete after 127.269 msecs [90799.790316] PM: resume of drv: dev:ep_00 complete after 127.238 msecs [90799.790322] PM: resume of drv:hub dev:7-0:1.0 complete after 127.201 msecs [90799.790329] PM: resume of drv: dev:ep_00 complete after 127.170 msecs [90799.790334] PM: resume of drv:hub dev:8-0:1.0 complete after 127.133 msecs [90799.790342] PM: resume of drv: dev:ep_00 complete after 127.101 msecs [90799.790347] PM: resume of drv: dev:ep_81 complete after 127.526 msecs [90799.790353] PM: resume of drv: dev:ep_81 complete after 127.452 msecs [90799.790359] PM: resume of drv: dev:ep_81 complete after 127.379 msecs [90799.790364] PM: resume of drv: dev:ep_81 complete after 127.305 msecs [90799.790369] PM: resume of drv: dev:ep_81 complete after 127.229 msecs [90799.790375] PM: resume of drv: dev:ep_81 complete after 127.153 msecs [90799.810031] PM: resume of drv:usb dev:usb1 complete after 147.386 msecs [90799.810045] PM: resume of drv:hub dev:1-0:1.0 complete after 147.395 msecs [90799.810053] PM: resume of drv: dev:ep_00 complete after 147.388 msecs [90799.810078] PM: resume of drv: dev:ep_81 complete after 147.416 msecs [90799.814902] r8169 0000:01:00.0: wake-up capability disabled by ACPI [90799.814910] r8169 0000:01:00.0: PME# disabled [90799.817370] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 154.906 msecs [90799.825781] PM: resume of drv:button dev:PNP0C0D:00 complete after 163.931 msecs [90799.930062] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [90800.025180] PM: resume of drv:battery dev:PNP0C0A:00 complete after 199.328 msecs [90800.030046] ata6: SATA link down (SStatus 0 SControl 300) [90800.053827] i8042 kbd 00:07: wake-up capability disabled by ACPI [90800.071944] ata5: SATA link down (SStatus 0 SControl 300) [90800.074482] PM: resume of drv:i915 dev:0000:00:02.0 complete after 412.708 msecs [90800.087454] PM: resume of drv:usb dev:1-3 complete after 424.160 msecs [90800.087487] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.173 msecs [90800.087490] PM: resume of drv: dev:ep_00 complete after 424.118 msecs [90800.087505] PM: resume of drv: dev:ep_01 complete after 424.173 msecs [90800.087508] PM: resume of drv:scsi dev:host6 complete after 424.029 msecs [90800.087510] PM: resume of drv: dev:ep_82 complete after 424.160 msecs [90800.087518] PM: resume of drv:scsi_host dev:host6 complete after 424.020 msecs [90800.087529] PM: resume of drv:scsi dev:target6:0:0 complete after 424.011 msecs [90800.087551] PM: resume of drv:sd dev:6:0:0:0 complete after 424.012 msecs [90800.087570] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.008 msecs [90800.140025] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414868836467465 new 18445414839297797381 attempts 1 [90800.210058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [90800.223467] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [90800.237203] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [90800.237208] ata2.00: configured for UDMA/66 [90802.680071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [90802.686131] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [90802.692341] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [90802.692471] ata1.00: configured for UDMA/133 [90802.738634] PM: resume of drv:sd dev:0:0:0:0 complete after 3075.242 msecs [90802.738667] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2664.081 msecs [90802.738670] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3075.221 msecs [90802.746027] PM: resume of devices complete after 3084.296 msecs [90802.746380] PM: resume devices took 3.080 seconds [90802.746418] PM: Finishing wakeup. [90802.746420] Restarting tasks ... done. [90802.784128] video LNXVIDEO:00: Restoring backlight state [90803.023898] r8169 0000:01:00.0: eth0: link down [90803.025554] ADDRCONF(NETDEV_UP): eth0: link is not ready [90803.038987] ADDRCONF(NETDEV_UP): wlan0: link is not ready [90805.806717] wlan0: authenticate with 00:0c:41:e2:f9:75 (try 1) [90805.808238] wlan0: authenticated [90805.808290] wlan0: associate with 00:0c:41:e2:f9:75 (try 1) [90805.810478] wlan0: RX AssocResp from 00:0c:41:e2:f9:75 (capab=0x411 status=0 aid=1) [90805.810484] wlan0: associated [90805.812455] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [90805.925480] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [90805.925498] /dev/vmnet: hub 0 does not exist, allocating memory. [90805.925520] /dev/vmnet: port on hub 0 successfully opened [90805.925535] bridge-wlan0: device is wireless, enabling SMAC [90805.925539] bridge-wlan0: up [90805.925544] bridge-wlan0: attached [90815.990037] wlan0: no IPv6 routers present [91277.711967] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [91277.711972] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [91277.719368] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [91277.719371] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [91280.495427] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [91280.495432] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [91280.502643] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [91280.502648] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [93191.805794] wlan0: deauthenticating from 00:0c:41:e2:f9:75 by local choice (reason=3) [93191.920225] cfg80211: All devices are disconnected, going to restore regulatory settings [93191.920232] cfg80211: Restoring regulatory settings [93191.920240] cfg80211: Calling CRDA to update world regulatory domain [93191.961461] bridge-wlan0: disabling the bridge [93192.000086] bridge-wlan0: down [93192.000100] bridge-wlan0: detached [93192.088712] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [93192.088731] /dev/vmnet: hub 0 does not exist, allocating memory. [93192.088756] /dev/vmnet: port on hub 0 successfully opened [93192.088780] bridge-wlan0: attached [93192.088862] bridge-wlan0: detached [93192.442766] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [93192.442773] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442778] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [93192.442781] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442783] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [93192.442786] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442789] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [93192.442792] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442794] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [93192.442797] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442800] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [93192.442804] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442806] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [93192.442809] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442811] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [93192.442814] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442817] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [93192.442819] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442822] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [93192.442825] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442827] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [93192.442830] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [93192.442832] cfg80211: Disabling freq 2467 MHz [93192.442834] cfg80211: Disabling freq 2472 MHz [93192.442836] cfg80211: Disabling freq 2484 MHz [93192.442841] cfg80211: World regulatory domain updated: [93192.442842] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [93192.442845] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [93192.442848] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [93192.442851] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [93192.442853] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [93192.442856] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [93196.522166] PM: Syncing filesystems ... done. [93196.536748] PM: Preparing system for mem sleep [93197.183785] Freezing user space processes ... (elapsed 0.01 seconds) done. [93197.200110] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [93197.220103] PM: Entering mem sleep [93197.220160] Suspending console(s) (use no_console_suspend to debug) [93197.230212] sd 0:0:0:0: [sda] Synchronizing SCSI cache [93197.230298] sd 0:0:0:0: [sda] Stopping disk [93197.316522] i8042 aux 00:08: wake-up capability disabled by ACPI [93197.319472] i8042 kbd 00:07: wake-up capability enabled by ACPI [93197.319591] ehci_hcd 0000:00:1d.7: PCI INT B disabled [93197.319605] uhci_hcd 0000:00:1d.2: PCI INT D disabled [93197.319619] uhci_hcd 0000:00:1d.1: PCI INT C disabled [93197.319630] uhci_hcd 0000:00:1d.0: PCI INT B disabled [93197.319655] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [93197.319898] uhci_hcd 0000:00:1a.2: PCI INT C disabled [93197.319912] uhci_hcd 0000:00:1a.1: PCI INT B disabled [93197.319932] uhci_hcd 0000:00:1a.0: PCI INT A disabled [93197.320032] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [93197.330032] ehci_hcd 0000:00:1a.7: PCI INT D disabled [93197.430379] HDA Intel 0000:00:1b.0: PCI INT A disabled [93197.430417] ACPI handle has no context! [93197.450024] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 130.361 msecs [93198.158840] PM: suspend of drv:sd dev:0:0:0:0 complete after 928.632 msecs [93198.158851] PM: suspend of drv:scsi dev:target0:0:0 complete after 928.602 msecs [93198.158866] PM: suspend of drv:scsi dev:host0 complete after 928.403 msecs [93198.170027] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 850.470 msecs [93198.170050] PM: suspend of drv: dev:pci0000:00 complete after 850.001 msecs [93198.170059] PM: suspend of devices complete after 949.306 msecs [93198.170062] PM: suspend devices took 0.950 seconds [93198.190111] r8169 0000:01:00.0: PME# enabled [93198.240025] r8169 0000:01:00.0: wake-up capability enabled by ACPI [93198.300351] PM: late suspend of devices complete after 130.283 msecs [93198.300497] ACPI: Preparing to enter system sleep state S3 [93198.550084] PM: Saving platform NVS memory [93198.551319] Disabling non-boot CPUs ... [93198.700057] CPU 1 is now offline [93198.700504] Back to C! [93198.700504] PM: Restoring platform NVS memory [93198.700504] Enabling non-boot CPUs ... [93198.700504] Booting Node 0 Processor 1 APIC 0x1 [93198.870544] Switched to NOHz mode on CPU #1 [93198.882320] CPU1 is up [93198.883498] ACPI: Waking up from system sleep state S3 [93199.180241] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [93199.180248] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [93199.180306] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93199.180342] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93199.180377] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93199.180418] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [93199.180463] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [93199.180469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [93199.180512] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [93199.180518] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [93199.180576] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [93199.180582] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [93199.180637] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93199.180672] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93199.180707] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93199.180748] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [93199.180779] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [93199.180784] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [93199.180789] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [93199.180799] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [93199.180884] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [93199.180946] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [93199.180968] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [93199.181043] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [93199.181698] PM: early resume of devices complete after 1.591 msecs [93199.181781] i915 0000:00:02.0: setting latency timer to 64 [93199.181890] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [93199.181896] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [93199.181922] usb usb3: root hub lost power or was reset [93199.181935] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [93199.181941] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [93199.181965] usb usb4: root hub lost power or was reset [93199.181978] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [93199.181984] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [93199.182010] usb usb5: root hub lost power or was reset [93199.182032] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [93199.182045] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [93199.182095] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [93199.182101] HDA Intel 0000:00:1b.0: setting latency timer to 64 [93199.182149] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [93199.182196] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [93199.182206] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [93199.182215] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [93199.182221] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [93199.182244] usb usb6: root hub lost power or was reset [93199.182258] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [93199.182264] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [93199.182287] usb usb7: root hub lost power or was reset [93199.182300] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [93199.182306] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [93199.182329] usb usb8: root hub lost power or was reset [93199.182344] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [93199.182350] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [93199.182393] pci 0000:00:1e.0: setting latency timer to 64 [93199.182411] ahci 0000:00:1f.2: setting latency timer to 64 [93199.183475] sd 0:0:0:0: [sda] Starting disk [93199.200014] /dev/vmmon[12075]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414839297797381 new 18445414837168797382 attempts 1 [93199.310054] PM: resume of drv:usb dev:usb3 complete after 127.223 msecs [93199.310078] PM: resume of drv:hub dev:3-0:1.0 complete after 127.215 msecs [93199.310082] PM: resume of drv:usb dev:usb4 complete after 127.153 msecs [93199.310087] PM: resume of drv: dev:ep_00 complete after 127.179 msecs [93199.310093] PM: resume of drv: dev:ep_81 complete after 127.204 msecs [93199.310106] PM: resume of drv:usb dev:usb5 complete after 127.098 msecs [93199.310126] PM: resume of drv: dev:ep_00 complete after 127.137 msecs [93199.310140] PM: resume of drv: dev:ep_00 complete after 127.073 msecs [93199.310143] PM: resume of drv:usb dev:usb6 complete after 127.057 msecs [93199.310156] PM: resume of drv:hub dev:5-0:1.0 complete after 127.125 msecs [93199.310164] PM: resume of drv: dev:ep_81 complete after 127.116 msecs [93199.310172] PM: resume of drv:usb dev:usb7 complete after 127.006 msecs [93199.310177] PM: resume of drv: dev:ep_00 complete after 127.031 msecs [93199.310193] PM: resume of drv: dev:ep_00 complete after 126.962 msecs [93199.310195] PM: resume of drv:usb dev:usb8 complete after 126.943 msecs [93199.310208] PM: resume of drv:hub dev:7-0:1.0 complete after 127.018 msecs [93199.310211] PM: resume of drv:hub dev:4-0:1.0 complete after 127.259 msecs [93199.310216] PM: resume of drv: dev:ep_81 complete after 127.005 msecs [93199.310219] PM: resume of drv:hub dev:6-0:1.0 complete after 127.111 msecs [93199.310230] PM: resume of drv: dev:ep_81 complete after 127.259 msecs [93199.310232] PM: resume of drv:hub dev:8-0:1.0 complete after 126.958 msecs [93199.310243] PM: resume of drv: dev:ep_81 complete after 127.117 msecs [93199.310246] PM: resume of drv: dev:ep_00 complete after 126.931 msecs [93199.310260] PM: resume of drv: dev:ep_81 complete after 126.964 msecs [93199.312043] r8169 0000:01:00.0: wake-up capability disabled by ACPI [93199.312051] r8169 0000:01:00.0: PME# disabled [93199.314512] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 132.041 msecs [93199.323117] PM: resume of drv:button dev:PNP0C0D:00 complete after 141.263 msecs [93199.330045] PM: resume of drv:usb dev:usb1 complete after 147.393 msecs [93199.330066] PM: resume of drv:hub dev:1-0:1.0 complete after 147.406 msecs [93199.330090] PM: resume of drv: dev:ep_00 complete after 147.408 msecs [93199.330107] PM: resume of drv: dev:ep_81 complete after 147.436 msecs [93199.450079] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [93199.522994] PM: resume of drv:battery dev:PNP0C0A:00 complete after 199.806 msecs [93199.547465] i8042 kbd 00:07: wake-up capability disabled by ACPI [93199.547605] PM: resume of drv:i915 dev:0000:00:02.0 complete after 365.830 msecs [93199.552372] ata6: SATA link down (SStatus 0 SControl 300) [93199.580063] ata5: SATA link down (SStatus 0 SControl 300) [93199.607712] PM: resume of drv:usb dev:1-3 complete after 424.343 msecs [93199.607737] PM: resume of drv: dev:ep_00 complete after 424.288 msecs [93199.607740] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.349 msecs [93199.607763] PM: resume of drv: dev:ep_01 complete after 424.356 msecs [93199.607766] PM: resume of drv:scsi dev:host6 complete after 424.207 msecs [93199.607769] PM: resume of drv: dev:ep_82 complete after 424.340 msecs [93199.607776] PM: resume of drv:scsi_host dev:host6 complete after 424.197 msecs [93199.607787] PM: resume of drv:scsi dev:target6:0:0 complete after 424.188 msecs [93199.607815] PM: resume of drv:sd dev:6:0:0:0 complete after 424.198 msecs [93199.607834] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.197 msecs [93199.730055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [93199.743459] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93199.757203] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93199.757208] ata2.00: configured for UDMA/66 [93202.230073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [93202.236138] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93202.242352] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93202.242489] ata1.00: configured for UDMA/133 [93202.289304] PM: resume of drv:sd dev:0:0:0:0 complete after 3105.829 msecs [93202.289337] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2721.246 msecs [93202.289340] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3105.811 msecs [93202.295521] PM: resume of devices complete after 3113.788 msecs [93202.295878] PM: resume devices took 3.110 seconds [93202.295922] PM: Finishing wakeup. [93202.295924] Restarting tasks ... done. [93202.335441] video LNXVIDEO:00: Restoring backlight state [93202.572189] r8169 0000:01:00.0: eth0: link down [93202.573565] ADDRCONF(NETDEV_UP): eth0: link is not ready [93202.587509] ADDRCONF(NETDEV_UP): wlan0: link is not ready [93335.922860] PM: Syncing filesystems ... done. [93335.937048] PM: Preparing system for mem sleep [93336.700192] Freezing user space processes ... (elapsed 0.01 seconds) done. [93336.720115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [93336.740106] PM: Entering mem sleep [93336.740155] Suspending console(s) (use no_console_suspend to debug) [93336.770225] sd 0:0:0:0: [sda] Synchronizing SCSI cache [93336.770303] sd 0:0:0:0: [sda] Stopping disk [93336.856793] i8042 aux 00:08: wake-up capability disabled by ACPI [93336.861004] i8042 kbd 00:07: wake-up capability enabled by ACPI [93336.861119] uhci_hcd 0000:00:1d.2: PCI INT D disabled [93336.861122] ehci_hcd 0000:00:1d.7: PCI INT B disabled [93336.861130] uhci_hcd 0000:00:1d.1: PCI INT C disabled [93336.861135] uhci_hcd 0000:00:1d.0: PCI INT B disabled [93336.861147] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [93336.861150] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [93336.861172] ehci_hcd 0000:00:1a.7: PCI INT D disabled [93336.861181] uhci_hcd 0000:00:1a.2: PCI INT C disabled [93336.861190] uhci_hcd 0000:00:1a.1: PCI INT B disabled [93336.861199] uhci_hcd 0000:00:1a.0: PCI INT A disabled [93336.970348] HDA Intel 0000:00:1b.0: PCI INT A disabled [93336.970386] ACPI handle has no context! [93336.990015] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 128.861 msecs [93337.711947] PM: suspend of drv:sd dev:0:0:0:0 complete after 941.727 msecs [93337.711960] PM: suspend of drv:scsi dev:target0:0:0 complete after 941.707 msecs [93337.711974] PM: suspend of drv:scsi dev:host0 complete after 941.642 msecs [93337.730034] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 868.943 msecs [93337.730044] PM: suspend of drv: dev:pci0000:00 complete after 868.448 msecs [93337.730053] PM: suspend of devices complete after 989.308 msecs [93337.730055] PM: suspend devices took 0.990 seconds [93337.750105] r8169 0000:01:00.0: PME# enabled [93337.800026] r8169 0000:01:00.0: wake-up capability enabled by ACPI [93337.860296] PM: late suspend of devices complete after 130.235 msecs [93337.860442] ACPI: Preparing to enter system sleep state S3 [93338.110088] PM: Saving platform NVS memory [93338.111231] Disabling non-boot CPUs ... [93338.220023] CPU 1 is now offline [93338.220480] Back to C! [93338.220480] PM: Restoring platform NVS memory [93338.220480] Enabling non-boot CPUs ... [93338.220480] Booting Node 0 Processor 1 APIC 0x1 [93338.390543] Switched to NOHz mode on CPU #1 [93338.402211] CPU1 is up [93338.403390] ACPI: Waking up from system sleep state S3 [93338.700237] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [93338.700244] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [93338.700302] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93338.700338] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93338.700373] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93338.700414] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [93338.700459] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [93338.700465] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [93338.700508] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [93338.700514] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [93338.700572] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [93338.700578] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [93338.700633] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93338.700669] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93338.700704] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [93338.700745] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [93338.700775] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [93338.700780] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [93338.700785] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [93338.700796] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [93338.700880] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [93338.700943] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [93338.700964] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [93338.701040] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [93338.701696] PM: early resume of devices complete after 1.592 msecs [93338.701778] i915 0000:00:02.0: setting latency timer to 64 [93338.701931] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [93338.701938] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [93338.701962] usb usb3: root hub lost power or was reset [93338.701977] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [93338.701983] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [93338.702005] usb usb4: root hub lost power or was reset [93338.702019] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [93338.702025] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [93338.702048] usb usb5: root hub lost power or was reset [93338.702063] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [93338.702069] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [93338.702117] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [93338.702130] HDA Intel 0000:00:1b.0: setting latency timer to 64 [93338.702194] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [93338.702241] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [93338.702252] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [93338.702260] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [93338.702266] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [93338.702290] usb usb6: root hub lost power or was reset [93338.702303] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [93338.702308] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [93338.702332] usb usb7: root hub lost power or was reset [93338.702344] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [93338.702350] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [93338.702373] usb usb8: root hub lost power or was reset [93338.702388] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [93338.702393] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [93338.702437] pci 0000:00:1e.0: setting latency timer to 64 [93338.702455] ahci 0000:00:1f.2: setting latency timer to 64 [93338.702888] sd 0:0:0:0: [sda] Starting disk [93338.829184] r8169 0000:01:00.0: wake-up capability disabled by ACPI [93338.829192] r8169 0000:01:00.0: PME# disabled [93338.830066] PM: resume of drv:usb dev:usb8 complete after 127.249 msecs [93338.830091] PM: resume of drv:usb dev:usb5 complete after 127.332 msecs [93338.830112] PM: resume of drv:usb dev:usb7 complete after 127.316 msecs [93338.830133] PM: resume of drv:usb dev:usb6 complete after 127.355 msecs [93338.830154] PM: resume of drv:usb dev:usb4 complete after 127.414 msecs [93338.830176] PM: resume of drv:usb dev:usb3 complete after 127.456 msecs [93338.830192] PM: resume of drv:hub dev:8-0:1.0 complete after 127.369 msecs [93338.830199] PM: resume of drv: dev:ep_00 complete after 127.369 msecs [93338.830205] PM: resume of drv:hub dev:5-0:1.0 complete after 127.439 msecs [93338.830212] PM: resume of drv: dev:ep_00 complete after 127.439 msecs [93338.830218] PM: resume of drv:hub dev:7-0:1.0 complete after 127.414 msecs [93338.830224] PM: resume of drv: dev:ep_00 complete after 127.413 msecs [93338.830229] PM: resume of drv:hub dev:6-0:1.0 complete after 127.445 msecs [93338.830236] PM: resume of drv: dev:ep_00 complete after 127.444 msecs [93338.830241] PM: resume of drv:hub dev:4-0:1.0 complete after 127.495 msecs [93338.830249] PM: resume of drv: dev:ep_00 complete after 127.494 msecs [93338.830255] PM: resume of drv:hub dev:3-0:1.0 complete after 127.527 msecs [93338.830261] PM: resume of drv: dev:ep_00 complete after 127.526 msecs [93338.830267] PM: resume of drv: dev:ep_81 complete after 127.441 msecs [93338.830272] PM: resume of drv: dev:ep_81 complete after 127.503 msecs [93338.830277] PM: resume of drv: dev:ep_81 complete after 127.470 msecs [93338.830282] PM: resume of drv: dev:ep_81 complete after 127.494 msecs [93338.830288] PM: resume of drv: dev:ep_81 complete after 127.537 msecs [93338.830293] PM: resume of drv: dev:ep_81 complete after 127.561 msecs [93338.831632] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 129.104 msecs [93338.839602] PM: resume of drv:button dev:PNP0C0D:00 complete after 137.744 msecs [93338.850074] PM: resume of drv:usb dev:usb1 complete after 147.388 msecs [93338.850131] PM: resume of drv: dev:ep_00 complete after 147.431 msecs [93338.850145] PM: resume of drv:hub dev:1-0:1.0 complete after 147.451 msecs [93338.850153] PM: resume of drv: dev:ep_81 complete after 147.457 msecs [93338.970084] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [93339.038020] PM: resume of drv:battery dev:PNP0C0A:00 complete after 198.346 msecs [93339.067279] i8042 kbd 00:07: wake-up capability disabled by ACPI [93339.087793] PM: resume of drv:i915 dev:0000:00:02.0 complete after 386.019 msecs [93339.090070] ata6: SATA link down (SStatus 0 SControl 300) [93339.110062] ata5: SATA link down (SStatus 0 SControl 300) [93339.127619] PM: resume of drv:usb dev:1-3 complete after 424.753 msecs [93339.127643] PM: resume of drv: dev:ep_00 complete after 424.763 msecs [93339.127646] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.775 msecs [93339.127659] PM: resume of drv: dev:ep_01 complete after 424.787 msecs [93339.127676] PM: resume of drv: dev:ep_82 complete after 424.800 msecs [93339.127678] PM: resume of drv:scsi dev:host6 complete after 424.742 msecs [93339.127696] PM: resume of drv:scsi_host dev:host6 complete after 424.757 msecs [93339.127699] PM: resume of drv:scsi dev:target6:0:0 complete after 424.754 msecs [93339.127717] PM: resume of drv:sd dev:6:0:0:0 complete after 424.770 msecs [93339.127736] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.786 msecs [93339.200041] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414837168797382 new 18445414835245116932 attempts 1 [93339.250080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [93339.263505] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93339.277301] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93339.277306] ata2.00: configured for UDMA/66 [93341.750074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [93341.756125] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93341.762332] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [93341.762466] ata1.00: configured for UDMA/133 [93341.810059] PM: resume of drv:sd dev:0:0:0:0 complete after 3107.172 msecs [93341.810097] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2722.204 msecs [93341.810100] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3107.177 msecs [93341.815767] PM: resume of devices complete after 3114.037 msecs [93341.816123] PM: resume devices took 3.110 seconds [93341.816161] PM: Finishing wakeup. [93341.816163] Restarting tasks ... done. [93341.884661] video LNXVIDEO:00: Restoring backlight state [93342.166172] r8169 0000:01:00.0: eth0: link down [93342.167543] ADDRCONF(NETDEV_UP): eth0: link is not ready [93342.188699] ADDRCONF(NETDEV_UP): wlan0: link is not ready [93343.252857] ADDRCONF(NETDEV_UP): wlan0: link is not ready [93343.530067] usb 6-1: new full speed USB device using uhci_hcd and address 21 [93343.735727] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input16 [93343.735926] generic-usb 0003:046D:C525.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [93343.741478] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input17 [93343.741765] generic-usb 0003:046D:C525.0008: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [93344.797572] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [93344.798957] wlan0: authenticated [93344.798996] wlan0: associate with 00:19:92:09:80:01 (try 1) [93344.801467] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=2) [93344.801473] wlan0: associated [93344.803394] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [93344.808936] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [93344.808954] /dev/vmnet: hub 0 does not exist, allocating memory. [93344.808976] /dev/vmnet: port on hub 0 successfully opened [93344.808990] bridge-wlan0: device is wireless, enabling SMAC [93344.808995] bridge-wlan0: up [93344.809329] bridge-wlan0: attached [93355.800033] wlan0: no IPv6 routers present [100456.790081] usb 6-1: USB disconnect, address 21 [101236.621123] wlan0: deauthenticating from 00:19:92:09:80:01 by local choice (reason=3) [101236.673613] cfg80211: All devices are disconnected, going to restore regulatory settings [101236.673621] cfg80211: Restoring regulatory settings [101236.673643] cfg80211: Calling CRDA to update world regulatory domain [101236.711419] bridge-wlan0: disabling the bridge [101236.740081] bridge-wlan0: down [101236.740092] bridge-wlan0: detached [101236.813912] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [101236.813929] /dev/vmnet: hub 0 does not exist, allocating memory. [101236.813952] /dev/vmnet: port on hub 0 successfully opened [101236.813971] bridge-wlan0: device is wireless, enabling SMAC [101236.813976] bridge-wlan0: up [101236.813981] bridge-wlan0: attached [101237.053319] bridge-wlan0: disabling the bridge on dev down [101237.080081] bridge-wlan0: down [101237.080334] bridge-wlan0: detached [101237.715253] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [101237.715259] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715261] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [101237.715264] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715267] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [101237.715270] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715272] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [101237.715275] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715278] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [101237.715281] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715284] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [101237.715286] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715290] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [101237.715293] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715295] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [101237.715298] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715300] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [101237.715303] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715305] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [101237.715308] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715311] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [101237.715314] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [101237.715316] cfg80211: Disabling freq 2467 MHz [101237.715317] cfg80211: Disabling freq 2472 MHz [101237.715319] cfg80211: Disabling freq 2484 MHz [101237.715323] cfg80211: World regulatory domain updated: [101237.715325] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [101237.715328] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [101237.715331] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [101237.715334] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [101237.715337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [101237.715339] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [101246.537077] PM: Syncing filesystems ... done. [101246.541177] PM: Preparing system for mem sleep [101247.170201] Freezing user space processes ... (elapsed 0.02 seconds) done. [101247.200115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [101247.220096] PM: Entering mem sleep [101247.220143] Suspending console(s) (use no_console_suspend to debug) [101247.220949] sd 0:0:0:0: [sda] Synchronizing SCSI cache [101247.221048] sd 0:0:0:0: [sda] Stopping disk [101247.305030] i8042 aux 00:08: wake-up capability disabled by ACPI [101247.307916] i8042 kbd 00:07: wake-up capability enabled by ACPI [101247.308048] ehci_hcd 0000:00:1d.7: PCI INT B disabled [101247.308059] uhci_hcd 0000:00:1d.2: PCI INT D disabled [101247.308071] uhci_hcd 0000:00:1d.1: PCI INT C disabled [101247.308082] uhci_hcd 0000:00:1d.0: PCI INT B disabled [101247.308097] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [101247.308112] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [101247.308305] ehci_hcd 0000:00:1a.7: PCI INT D disabled [101247.308317] uhci_hcd 0000:00:1a.2: PCI INT C disabled [101247.308327] uhci_hcd 0000:00:1a.1: PCI INT B disabled [101247.308337] uhci_hcd 0000:00:1a.0: PCI INT A disabled [101247.410377] HDA Intel 0000:00:1b.0: PCI INT A disabled [101247.410414] ACPI handle has no context! [101247.430020] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 121.900 msecs [101248.124485] PM: suspend of drv:sd dev:0:0:0:0 complete after 903.539 msecs [101248.124498] PM: suspend of drv:scsi dev:target0:0:0 complete after 903.518 msecs [101248.124522] PM: suspend of drv:scsi dev:host0 complete after 903.350 msecs [101248.140018] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 832.020 msecs [101248.140030] PM: suspend of drv: dev:pci0000:00 complete after 831.508 msecs [101248.140040] PM: suspend of devices complete after 919.349 msecs [101248.140043] PM: suspend devices took 0.920 seconds [101248.160105] r8169 0000:01:00.0: PME# enabled [101248.210024] r8169 0000:01:00.0: wake-up capability enabled by ACPI [101248.270325] PM: late suspend of devices complete after 130.278 msecs [101248.270471] ACPI: Preparing to enter system sleep state S3 [101248.520091] PM: Saving platform NVS memory [101248.521656] Disabling non-boot CPUs ... [101248.630070] CPU 1 is now offline [101248.630505] Back to C! [101248.630505] PM: Restoring platform NVS memory [101248.630505] Enabling non-boot CPUs ... [101248.630505] Booting Node 0 Processor 1 APIC 0x1 [101248.800545] Switched to NOHz mode on CPU #1 [101248.812230] CPU1 is up [101248.813422] ACPI: Waking up from system sleep state S3 [101249.110237] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [101249.110244] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [101249.110302] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101249.110338] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101249.110373] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101249.110414] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [101249.110460] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [101249.110466] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [101249.110508] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [101249.110514] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [101249.110573] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [101249.110579] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [101249.110634] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101249.110669] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101249.110704] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101249.110745] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [101249.110776] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [101249.110781] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [101249.110785] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [101249.110796] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [101249.110881] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [101249.110943] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [101249.110965] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [101249.111041] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [101249.111698] PM: early resume of devices complete after 1.593 msecs [101249.111781] i915 0000:00:02.0: setting latency timer to 64 [101249.111890] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [101249.111896] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [101249.111921] usb usb3: root hub lost power or was reset [101249.111936] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [101249.111942] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [101249.111965] usb usb4: root hub lost power or was reset [101249.111977] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [101249.111983] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [101249.112007] usb usb5: root hub lost power or was reset [101249.112021] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [101249.112027] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [101249.112074] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [101249.112081] HDA Intel 0000:00:1b.0: setting latency timer to 64 [101249.112129] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [101249.112187] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [101249.112206] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [101249.112214] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [101249.112220] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [101249.112242] usb usb6: root hub lost power or was reset [101249.112256] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [101249.112262] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [101249.112285] usb usb7: root hub lost power or was reset [101249.112298] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [101249.112304] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [101249.112328] usb usb8: root hub lost power or was reset [101249.112343] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [101249.112349] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [101249.112393] pci 0000:00:1e.0: setting latency timer to 64 [101249.112411] ahci 0000:00:1f.2: setting latency timer to 64 [101249.113442] sd 0:0:0:0: [sda] Starting disk [101249.239235] r8169 0000:01:00.0: wake-up capability disabled by ACPI [101249.239243] r8169 0000:01:00.0: PME# disabled [101249.240069] PM: resume of drv:usb dev:usb3 complete after 127.271 msecs [101249.240094] PM: resume of drv:usb dev:usb4 complete after 127.216 msecs [101249.240115] PM: resume of drv:usb dev:usb5 complete after 127.157 msecs [101249.240136] PM: resume of drv:usb dev:usb6 complete after 127.093 msecs [101249.240158] PM: resume of drv:usb dev:usb7 complete after 127.033 msecs [101249.240181] PM: resume of drv:usb dev:usb8 complete after 126.973 msecs [101249.240197] PM: resume of drv:hub dev:3-0:1.0 complete after 127.378 msecs [101249.240204] PM: resume of drv: dev:ep_00 complete after 127.346 msecs [101249.240210] PM: resume of drv:hub dev:4-0:1.0 complete after 127.310 msecs [101249.240216] PM: resume of drv: dev:ep_00 complete after 127.279 msecs [101249.240222] PM: resume of drv:hub dev:5-0:1.0 complete after 127.240 msecs [101249.240229] PM: resume of drv: dev:ep_00 complete after 127.207 msecs [101249.240234] PM: resume of drv:hub dev:6-0:1.0 complete after 127.167 msecs [101249.240241] PM: resume of drv: dev:ep_00 complete after 127.136 msecs [101249.240246] PM: resume of drv:hub dev:7-0:1.0 complete after 127.098 msecs [101249.240253] PM: resume of drv: dev:ep_00 complete after 127.065 msecs [101249.240259] PM: resume of drv:hub dev:8-0:1.0 complete after 127.029 msecs [101249.240266] PM: resume of drv: dev:ep_00 complete after 126.997 msecs [101249.240271] PM: resume of drv: dev:ep_81 complete after 127.433 msecs [101249.240276] PM: resume of drv: dev:ep_81 complete after 127.358 msecs [101249.240281] PM: resume of drv: dev:ep_81 complete after 127.279 msecs [101249.240286] PM: resume of drv: dev:ep_81 complete after 127.201 msecs [101249.240291] PM: resume of drv: dev:ep_81 complete after 127.125 msecs [101249.240297] PM: resume of drv: dev:ep_81 complete after 127.047 msecs [101249.241683] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 129.211 msecs [101249.250633] PM: resume of drv:button dev:PNP0C0D:00 complete after 138.778 msecs [101249.260056] PM: resume of drv:usb dev:usb1 complete after 147.387 msecs [101249.260073] PM: resume of drv:hub dev:1-0:1.0 complete after 147.397 msecs [101249.260083] PM: resume of drv: dev:ep_00 complete after 147.401 msecs [101249.260123] PM: resume of drv: dev:ep_81 complete after 147.445 msecs [101249.280057] PM: resume of drv:usb dev:usb2 complete after 167.371 msecs [101249.280080] PM: resume of drv: dev:ep_00 complete after 167.304 msecs [101249.280095] PM: resume of drv:hub dev:2-0:1.0 complete after 167.358 msecs [101249.280114] PM: resume of drv: dev:ep_81 complete after 167.357 msecs [101249.360026] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414835245116932 new 18445414813926116941 attempts 1 [101249.380033] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [101249.445962] PM: resume of drv:battery dev:PNP0C0A:00 complete after 195.258 msecs [101249.471060] i8042 kbd 00:07: wake-up capability disabled by ACPI [101249.471204] PM: resume of drv:i915 dev:0000:00:02.0 complete after 359.429 msecs [101249.480500] ata6: SATA link down (SStatus 0 SControl 300) [101249.520065] ata5: SATA link down (SStatus 0 SControl 300) [101249.537605] PM: resume of drv:usb dev:1-3 complete after 424.262 msecs [101249.537628] PM: resume of drv: dev:ep_00 complete after 424.210 msecs [101249.537631] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.267 msecs [101249.537644] PM: resume of drv: dev:ep_01 complete after 424.264 msecs [101249.537655] PM: resume of drv: dev:ep_82 complete after 424.255 msecs [101249.537657] PM: resume of drv:scsi dev:host6 complete after 424.133 msecs [101249.537675] PM: resume of drv:scsi_host dev:host6 complete after 424.132 msecs [101249.537678] PM: resume of drv:scsi dev:target6:0:0 complete after 424.113 msecs [101249.537702] PM: resume of drv:sd dev:6:0:0:0 complete after 424.119 msecs [101249.537720] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.117 msecs [101249.660079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [101249.673504] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101249.687243] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101249.687248] ata2.00: configured for UDMA/66 [101252.160073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [101252.166138] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101252.172351] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101252.172483] ata1.00: configured for UDMA/133 [101252.222640] PM: resume of drv:sd dev:0:0:0:0 complete after 3109.199 msecs [101252.222679] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2731.455 msecs [101252.222682] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3109.188 msecs [101252.228709] PM: resume of devices complete after 3116.976 msecs [101252.229067] PM: resume devices took 3.110 seconds [101252.229105] PM: Finishing wakeup. [101252.229107] Restarting tasks ... done. [101252.261077] video LNXVIDEO:00: Restoring backlight state [101252.552196] r8169 0000:01:00.0: eth0: link down [101252.553770] ADDRCONF(NETDEV_UP): eth0: link is not ready [101252.565845] ADDRCONF(NETDEV_UP): wlan0: link is not ready [101398.591519] PM: Syncing filesystems ... done. [101398.595252] PM: Preparing system for mem sleep [101399.161909] Freezing user space processes ... (elapsed 0.01 seconds) done. [101399.180115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [101399.200111] PM: Entering mem sleep [101399.200165] Suspending console(s) (use no_console_suspend to debug) [101399.201067] sd 0:0:0:0: [sda] Synchronizing SCSI cache [101399.201161] sd 0:0:0:0: [sda] Stopping disk [101399.285137] i8042 aux 00:08: wake-up capability disabled by ACPI [101399.288774] i8042 kbd 00:07: wake-up capability enabled by ACPI [101399.288888] uhci_hcd 0000:00:1d.2: PCI INT D disabled [101399.288891] ehci_hcd 0000:00:1d.7: PCI INT B disabled [101399.288900] uhci_hcd 0000:00:1d.1: PCI INT C disabled [101399.288903] uhci_hcd 0000:00:1d.0: PCI INT B disabled [101399.288918] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [101399.288920] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [101399.288939] uhci_hcd 0000:00:1a.2: PCI INT C disabled [101399.288950] uhci_hcd 0000:00:1a.1: PCI INT B disabled [101399.288965] uhci_hcd 0000:00:1a.0: PCI INT A disabled [101399.300033] ehci_hcd 0000:00:1a.7: PCI INT D disabled [101399.390352] HDA Intel 0000:00:1b.0: PCI INT A disabled [101399.390388] ACPI handle has no context! [101399.410015] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 121.091 msecs [101400.142501] PM: suspend of drv:sd dev:0:0:0:0 complete after 941.438 msecs [101400.142513] PM: suspend of drv:scsi dev:target0:0:0 complete after 941.408 msecs [101400.142527] PM: suspend of drv:scsi dev:host0 complete after 941.355 msecs [101400.160026] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 871.169 msecs [101400.160038] PM: suspend of drv: dev:pci0000:00 complete after 870.664 msecs [101400.160046] PM: suspend of devices complete after 959.300 msecs [101400.160049] PM: suspend devices took 0.960 seconds [101400.180107] r8169 0000:01:00.0: PME# enabled [101400.230024] r8169 0000:01:00.0: wake-up capability enabled by ACPI [101400.290308] PM: late suspend of devices complete after 130.254 msecs [101400.290454] ACPI: Preparing to enter system sleep state S3 [101400.540084] PM: Saving platform NVS memory [101400.541254] Disabling non-boot CPUs ... [101400.660055] CPU 1 is now offline [101400.660504] Back to C! [101400.660504] PM: Restoring platform NVS memory [101400.660504] Enabling non-boot CPUs ... [101400.660504] Booting Node 0 Processor 1 APIC 0x1 [101400.830548] Switched to NOHz mode on CPU #1 [101400.842206] CPU1 is up [101400.843396] ACPI: Waking up from system sleep state S3 [101401.140240] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [101401.140248] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [101401.140306] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101401.140342] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101401.140377] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101401.140418] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [101401.140463] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [101401.140469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [101401.140512] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [101401.140518] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [101401.140577] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [101401.140583] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [101401.140638] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101401.140673] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101401.140708] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [101401.140749] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [101401.140779] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [101401.140784] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [101401.140789] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [101401.140800] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [101401.140884] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [101401.140947] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [101401.140968] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [101401.141044] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [101401.141697] PM: early resume of devices complete after 1.591 msecs [101401.141779] i915 0000:00:02.0: setting latency timer to 64 [101401.141884] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [101401.141890] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [101401.141915] usb usb3: root hub lost power or was reset [101401.141929] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [101401.141935] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [101401.141958] usb usb4: root hub lost power or was reset [101401.141971] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [101401.141977] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [101401.142000] usb usb5: root hub lost power or was reset [101401.142015] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [101401.142021] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [101401.142077] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [101401.142088] HDA Intel 0000:00:1b.0: setting latency timer to 64 [101401.142144] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [101401.142191] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [101401.142202] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [101401.142210] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [101401.142216] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [101401.142240] usb usb6: root hub lost power or was reset [101401.142254] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [101401.142260] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [101401.142283] usb usb7: root hub lost power or was reset [101401.142296] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [101401.142302] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [101401.142326] usb usb8: root hub lost power or was reset [101401.142340] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [101401.142346] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [101401.142396] pci 0000:00:1e.0: setting latency timer to 64 [101401.142425] ahci 0000:00:1f.2: setting latency timer to 64 [101401.142863] sd 0:0:0:0: [sda] Starting disk [101401.269307] r8169 0000:01:00.0: wake-up capability disabled by ACPI [101401.269316] r8169 0000:01:00.0: PME# disabled [101401.270066] PM: resume of drv:usb dev:usb3 complete after 127.365 msecs [101401.270090] PM: resume of drv:usb dev:usb4 complete after 127.371 msecs [101401.270112] PM: resume of drv:usb dev:usb5 complete after 127.374 msecs [101401.270133] PM: resume of drv:usb dev:usb6 complete after 127.377 msecs [101401.270155] PM: resume of drv:usb dev:usb7 complete after 127.382 msecs [101401.270177] PM: resume of drv:usb dev:usb8 complete after 127.386 msecs [101401.270193] PM: resume of drv:hub dev:3-0:1.0 complete after 127.486 msecs [101401.270200] PM: resume of drv: dev:ep_00 complete after 127.485 msecs [101401.270205] PM: resume of drv:hub dev:4-0:1.0 complete after 127.480 msecs [101401.270212] PM: resume of drv: dev:ep_00 complete after 127.478 msecs [101401.270217] PM: resume of drv:hub dev:5-0:1.0 complete after 127.472 msecs [101401.270224] PM: resume of drv: dev:ep_00 complete after 127.472 msecs [101401.270230] PM: resume of drv:hub dev:6-0:1.0 complete after 127.467 msecs [101401.270237] PM: resume of drv: dev:ep_00 complete after 127.468 msecs [101401.270243] PM: resume of drv:hub dev:7-0:1.0 complete after 127.463 msecs [101401.270249] PM: resume of drv: dev:ep_00 complete after 127.462 msecs [101401.270255] PM: resume of drv:hub dev:8-0:1.0 complete after 127.457 msecs [101401.270262] PM: resume of drv: dev:ep_00 complete after 127.456 msecs [101401.270267] PM: resume of drv: dev:ep_81 complete after 127.557 msecs [101401.270273] PM: resume of drv: dev:ep_81 complete after 127.543 msecs [101401.270278] PM: resume of drv: dev:ep_81 complete after 127.529 msecs [101401.270283] PM: resume of drv: dev:ep_81 complete after 127.517 msecs [101401.270288] PM: resume of drv: dev:ep_81 complete after 127.505 msecs [101401.270294] PM: resume of drv: dev:ep_81 complete after 127.492 msecs [101401.271755] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 129.268 msecs [101401.279749] PM: resume of drv:button dev:PNP0C0D:00 complete after 137.899 msecs [101401.290124] PM: resume of drv:usb dev:usb1 complete after 147.459 msecs [101401.290154] PM: resume of drv:hub dev:1-0:1.0 complete after 147.482 msecs [101401.290164] PM: resume of drv: dev:ep_00 complete after 147.485 msecs [101401.290171] PM: resume of drv: dev:ep_81 complete after 147.495 msecs [101401.370016] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414813926116941 new 18445414810337116954 attempts 1 [101401.410085] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [101401.474981] PM: resume of drv:battery dev:PNP0C0A:00 complete after 195.163 msecs [101401.501881] i8042 kbd 00:07: wake-up capability disabled by ACPI [101401.502098] PM: resume of drv:i915 dev:0000:00:02.0 complete after 360.324 msecs [101401.510618] ata5: SATA link down (SStatus 0 SControl 300) [101401.530066] ata6: SATA link down (SStatus 0 SControl 300) [101401.567599] PM: resume of drv:usb dev:1-3 complete after 424.757 msecs [101401.567621] PM: resume of drv: dev:ep_00 complete after 424.765 msecs [101401.567624] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.777 msecs [101401.567652] PM: resume of drv: dev:ep_01 complete after 424.804 msecs [101401.567655] PM: resume of drv:scsi dev:host6 complete after 424.744 msecs [101401.567658] PM: resume of drv: dev:ep_82 complete after 424.806 msecs [101401.567673] PM: resume of drv:scsi_host dev:host6 complete after 424.760 msecs [101401.567680] PM: resume of drv:scsi dev:target6:0:0 complete after 424.757 msecs [101401.567695] PM: resume of drv:sd dev:6:0:0:0 complete after 424.774 msecs [101401.567713] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.790 msecs [101401.750069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [101401.763487] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101401.777286] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101401.777291] ata2.00: configured for UDMA/66 [101402.370046] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414810337116954 new 18445414810338448177 attempts 1 [101404.180071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [101404.186137] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101404.192356] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [101404.192489] ata1.00: configured for UDMA/133 [101404.240416] PM: resume of drv:sd dev:0:0:0:0 complete after 3097.554 msecs [101404.240449] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2717.752 msecs [101404.240453] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3097.555 msecs [101404.247156] PM: resume of devices complete after 3105.421 msecs [101404.247516] PM: resume devices took 3.100 seconds [101404.247555] PM: Finishing wakeup. [101404.247557] Restarting tasks ... done. [101404.291824] video LNXVIDEO:00: Restoring backlight state [101404.558256] r8169 0000:01:00.0: eth0: link down [101404.559564] ADDRCONF(NETDEV_UP): eth0: link is not ready [101404.576041] ADDRCONF(NETDEV_UP): wlan0: link is not ready [101406.797680] wlan0: authenticate with 00:0c:41:e2:f9:75 (try 1) [101406.799260] wlan0: authenticated [101406.799301] wlan0: associate with 00:0c:41:e2:f9:75 (try 1) [101406.802257] wlan0: RX AssocResp from 00:0c:41:e2:f9:75 (capab=0x411 status=0 aid=1) [101406.802262] wlan0: associated [101406.804216] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [101406.841824] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [101406.841845] /dev/vmnet: hub 0 does not exist, allocating memory. [101406.841868] /dev/vmnet: port on hub 0 successfully opened [101406.841883] bridge-wlan0: device is wireless, enabling SMAC [101406.841887] bridge-wlan0: up [101406.842902] bridge-wlan0: attached [101417.090023] wlan0: no IPv6 routers present [101426.280107] usb 2-5: new high speed USB device using ehci_hcd and address 117 [101426.432983] scsi22 : usb-storage 2-5:1.0 [101427.431241] scsi 22:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [101427.434968] sd 22:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) [101427.435953] sd 22:0:0:0: [sdc] Test WP failed, assume Write Enabled [101427.435960] sd 22:0:0:0: [sdc] Assuming drive cache: write through [101427.436767] sd 22:0:0:0: Attached scsi generic sg3 type 0 [101427.438078] sd 22:0:0:0: [sdc] Test WP failed, assume Write Enabled [101427.438087] sd 22:0:0:0: [sdc] Assuming drive cache: write through [101427.449971] sdc: sdc1 [101427.452325] sd 22:0:0:0: [sdc] Test WP failed, assume Write Enabled [101427.452330] sd 22:0:0:0: [sdc] Assuming drive cache: write through [101427.452335] sd 22:0:0:0: [sdc] Attached SCSI disk [101441.520090] usb 2-1: new high speed USB device using ehci_hcd and address 118 [101441.673346] scsi23 : usb-storage 2-1:1.0 [101442.672370] scsi 23:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [101442.674069] sd 23:0:0:0: Attached scsi generic sg4 type 0 [101442.676956] sd 23:0:0:0: [sdd] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [101442.677810] sd 23:0:0:0: [sdd] Test WP failed, assume Write Enabled [101442.677817] sd 23:0:0:0: [sdd] Assuming drive cache: write through [101442.679829] sd 23:0:0:0: [sdd] Test WP failed, assume Write Enabled [101442.679837] sd 23:0:0:0: [sdd] Assuming drive cache: write through [101442.716066] sdd: sdd1 [101442.720686] sd 23:0:0:0: [sdd] Test WP failed, assume Write Enabled [101442.720694] sd 23:0:0:0: [sdd] Assuming drive cache: write through [101442.720701] sd 23:0:0:0: [sdd] Attached SCSI disk [101443.160086] usb 7-1: new full speed USB device using uhci_hcd and address 3 [101443.358296] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input18 [101443.358522] generic-usb 0003:046D:C525.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [101443.364037] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input19 [101443.364303] generic-usb 0003:046D:C525.000A: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [104467.160083] usb 2-5: reset high speed USB device using ehci_hcd and address 117 [108067.160064] usb 2-5: reset high speed USB device using ehci_hcd and address 117 [109054.580091] usb 2-1: USB disconnect, address 118 [109059.500417] usb 2-5: USB disconnect, address 117 [109301.290101] usb 7-1: USB disconnect, address 3 [114060.100140] usb 2-1: new high speed USB device using ehci_hcd and address 120 [114060.268788] scsi24 : usb-storage 2-1:1.0 [114061.263348] scsi 24:0:0:0: Direct-Access T-Mobile myTouch 3G Slide 0100 PQ: 0 ANSI: 2 [114061.264964] sd 24:0:0:0: Attached scsi generic sg3 type 0 [114061.275332] sd 24:0:0:0: [sdc] Attached SCSI removable disk [114072.021349] sd 24:0:0:0: [sdc] 15544320 512-byte logical blocks: (7.95 GB/7.41 GiB) [114072.023349] sd 24:0:0:0: [sdc] Assuming drive cache: write through [114072.030157] sd 24:0:0:0: [sdc] Assuming drive cache: write through [114072.037594] sdc: sdc1 [114384.640194] usb 2-1: USB disconnect, address 120 [114771.640080] usb 2-1: new high speed USB device using ehci_hcd and address 121 [114771.808400] scsi25 : usb-storage 2-1:1.0 [114772.803250] scsi 25:0:0:0: Direct-Access T-Mobile myTouch 3G Slide 0100 PQ: 0 ANSI: 2 [114772.804402] sd 25:0:0:0: Attached scsi generic sg3 type 0 [114772.814219] sd 25:0:0:0: [sdc] Attached SCSI removable disk [114814.021757] sd 25:0:0:0: [sdc] 15544320 512-byte logical blocks: (7.95 GB/7.41 GiB) [114814.025998] sd 25:0:0:0: [sdc] Assuming drive cache: write through [114814.038233] sd 25:0:0:0: [sdc] Assuming drive cache: write through [114814.243379] sdc: sdc1 [114901.690229] usb 2-1: USB disconnect, address 121 [114990.050078] usb 2-1: new high speed USB device using ehci_hcd and address 122 [114990.229206] scsi26 : usb-storage 2-1:1.0 [114991.233173] scsi 26:0:0:0: Direct-Access T-Mobile myTouch 3G Slide 0100 PQ: 0 ANSI: 2 [114991.240798] sd 26:0:0:0: Attached scsi generic sg3 type 0 [114991.246802] sd 26:0:0:0: [sdc] Attached SCSI removable disk [115139.010976] sd 26:0:0:0: [sdc] 15544320 512-byte logical blocks: (7.95 GB/7.41 GiB) [115139.013544] sd 26:0:0:0: [sdc] Assuming drive cache: write through [115139.019274] sd 26:0:0:0: [sdc] Assuming drive cache: write through [115139.022553] sdc: sdc1 [115166.370093] usb 2-1: USB disconnect, address 122 [117848.223545] wlan0: deauthenticating from 00:0c:41:e2:f9:75 by local choice (reason=3) [117848.350162] cfg80211: All devices are disconnected, going to restore regulatory settings [117848.350172] cfg80211: Restoring regulatory settings [117848.350177] cfg80211: Calling CRDA to update world regulatory domain [117848.433763] bridge-wlan0: disabling the bridge on dev down [117848.460090] bridge-wlan0: down [117848.464706] bridge-wlan0: detached [117848.478797] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [117848.478816] /dev/vmnet: hub 0 does not exist, allocating memory. [117848.478841] /dev/vmnet: port on hub 0 successfully opened [117848.478865] bridge-wlan0: attached [117848.478948] bridge-wlan0: detached [117849.358253] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [117849.358260] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358264] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [117849.358267] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358270] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [117849.358272] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358275] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [117849.358278] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358280] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [117849.358283] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358285] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [117849.358288] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358291] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [117849.358293] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358296] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [117849.358299] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358301] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [117849.358304] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358306] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [117849.358309] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358312] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [117849.358316] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [117849.358318] cfg80211: Disabling freq 2467 MHz [117849.358320] cfg80211: Disabling freq 2472 MHz [117849.358322] cfg80211: Disabling freq 2484 MHz [117849.358326] cfg80211: World regulatory domain updated: [117849.358327] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [117849.358330] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [117849.358333] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [117849.358336] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [117849.358338] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [117849.358341] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [117853.974601] PM: Syncing filesystems ... done. [117853.985656] PM: Preparing system for mem sleep [117854.630460] Freezing user space processes ... (elapsed 0.01 seconds) done. [117854.650102] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [117854.670083] PM: Entering mem sleep [117854.670140] Suspending console(s) (use no_console_suspend to debug) [117854.670998] sd 0:0:0:0: [sda] Synchronizing SCSI cache [117854.671113] sd 0:0:0:0: [sda] Stopping disk [117854.754669] i8042 aux 00:08: wake-up capability disabled by ACPI [117854.757626] i8042 kbd 00:07: wake-up capability enabled by ACPI [117854.757780] ehci_hcd 0000:00:1d.7: PCI INT B disabled [117854.757794] uhci_hcd 0000:00:1d.2: PCI INT D disabled [117854.757804] uhci_hcd 0000:00:1d.1: PCI INT C disabled [117854.757815] uhci_hcd 0000:00:1d.0: PCI INT B disabled [117854.757833] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [117854.757849] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [117854.758296] ehci_hcd 0000:00:1a.7: PCI INT D disabled [117854.758329] uhci_hcd 0000:00:1a.2: PCI INT C disabled [117854.758334] uhci_hcd 0000:00:1a.1: PCI INT B disabled [117854.758347] uhci_hcd 0000:00:1a.0: PCI INT A disabled [117854.970084] HDA Intel 0000:00:1b.0: PCI INT A disabled [117854.970121] ACPI handle has no context! [117854.990020] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 232.163 msecs [117855.611410] PM: suspend of drv:sd dev:0:0:0:0 complete after 940.416 msecs [117855.611422] PM: suspend of drv:scsi dev:target0:0:0 complete after 940.272 msecs [117855.611441] PM: suspend of drv:scsi dev:host0 complete after 940.146 msecs [117855.630019] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 872.293 msecs [117855.630037] PM: suspend of drv: dev:pci0000:00 complete after 871.682 msecs [117855.630046] PM: suspend of devices complete after 959.323 msecs [117855.630049] PM: suspend devices took 0.960 seconds [117855.650120] r8169 0000:01:00.0: PME# enabled [117855.700024] r8169 0000:01:00.0: wake-up capability enabled by ACPI [117855.760330] PM: late suspend of devices complete after 130.277 msecs [117855.760478] ACPI: Preparing to enter system sleep state S3 [117856.010083] PM: Saving platform NVS memory [117856.011336] Disabling non-boot CPUs ... [117856.140072] CPU 1 is now offline [117856.140547] Back to C! [117856.140547] PM: Restoring platform NVS memory [117856.140547] Enabling non-boot CPUs ... [117856.140547] Booting Node 0 Processor 1 APIC 0x1 [117856.310543] Switched to NOHz mode on CPU #1 [117856.322269] CPU1 is up [117856.323448] ACPI: Waking up from system sleep state S3 [117856.620241] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [117856.620248] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [117856.620306] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [117856.620342] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [117856.620377] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [117856.620418] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [117856.620463] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [117856.620469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [117856.620512] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [117856.620518] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [117856.620576] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [117856.620582] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [117856.620637] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [117856.620673] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [117856.620708] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [117856.620748] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [117856.620780] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [117856.620784] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [117856.620789] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [117856.620800] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [117856.620884] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [117856.620947] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [117856.620969] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [117856.621044] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [117856.621698] PM: early resume of devices complete after 1.590 msecs [117856.621779] i915 0000:00:02.0: setting latency timer to 64 [117856.621917] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [117856.621924] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [117856.621948] usb usb3: root hub lost power or was reset [117856.621962] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [117856.621968] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [117856.621991] usb usb4: root hub lost power or was reset [117856.622003] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [117856.622009] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [117856.622032] usb usb5: root hub lost power or was reset [117856.622046] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [117856.622052] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [117856.622100] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [117856.622111] HDA Intel 0000:00:1b.0: setting latency timer to 64 [117856.622176] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [117856.622222] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [117856.622233] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [117856.622242] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [117856.622248] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [117856.622271] usb usb6: root hub lost power or was reset [117856.622284] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [117856.622290] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [117856.622314] usb usb7: root hub lost power or was reset [117856.622327] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [117856.622333] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [117856.622356] usb usb8: root hub lost power or was reset [117856.622370] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [117856.622376] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [117856.622419] pci 0000:00:1e.0: setting latency timer to 64 [117856.622446] ahci 0000:00:1f.2: setting latency timer to 64 [117856.623398] sd 0:0:0:0: [sda] Starting disk [117856.640014] /dev/vmmon[21870]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414810338448177 new 18445414779046448178 attempts 1 [117856.750083] PM: resume of drv:usb dev:usb6 complete after 127.059 msecs [117856.750099] PM: resume of drv:hub dev:6-0:1.0 complete after 127.060 msecs [117856.750107] PM: resume of drv: dev:ep_00 complete after 127.031 msecs [117856.750113] PM: resume of drv: dev:ep_81 complete after 127.056 msecs [117856.750133] PM: resume of drv:usb dev:usb8 complete after 126.955 msecs [117856.750143] PM: resume of drv:hub dev:8-0:1.0 complete after 126.942 msecs [117856.750150] PM: resume of drv: dev:ep_00 complete after 126.907 msecs [117856.750156] PM: resume of drv: dev:ep_81 complete after 126.935 msecs [117856.750175] PM: resume of drv:usb dev:usb5 complete after 127.238 msecs [117856.750185] PM: resume of drv:hub dev:5-0:1.0 complete after 127.225 msecs [117856.750192] PM: resume of drv: dev:ep_00 complete after 127.194 msecs [117856.750198] PM: resume of drv: dev:ep_81 complete after 127.220 msecs [117856.750217] PM: resume of drv:usb dev:usb7 complete after 127.123 msecs [117856.750227] PM: resume of drv:hub dev:7-0:1.0 complete after 127.110 msecs [117856.750234] PM: resume of drv: dev:ep_00 complete after 127.077 msecs [117856.750239] PM: resume of drv: dev:ep_81 complete after 127.101 msecs [117856.750259] PM: resume of drv:usb dev:usb4 complete after 127.404 msecs [117856.750269] PM: resume of drv:hub dev:4-0:1.0 complete after 127.389 msecs [117856.750276] PM: resume of drv: dev:ep_00 complete after 127.360 msecs [117856.750282] PM: resume of drv: dev:ep_81 complete after 127.384 msecs [117856.750301] PM: resume of drv:usb dev:usb3 complete after 127.525 msecs [117856.750311] PM: resume of drv:hub dev:3-0:1.0 complete after 127.512 msecs [117856.750318] PM: resume of drv: dev:ep_00 complete after 127.482 msecs [117856.750323] PM: resume of drv: dev:ep_81 complete after 127.506 msecs [117856.761733] r8169 0000:01:00.0: wake-up capability disabled by ACPI [117856.761741] r8169 0000:01:00.0: PME# disabled [117856.764178] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 141.662 msecs [117856.770063] PM: resume of drv:usb dev:usb1 complete after 147.413 msecs [117856.770083] PM: resume of drv:hub dev:1-0:1.0 complete after 147.426 msecs [117856.770092] PM: resume of drv: dev:ep_00 complete after 147.429 msecs [117856.770146] PM: resume of drv: dev:ep_81 complete after 147.486 msecs [117856.772430] PM: resume of drv:button dev:PNP0C0D:00 complete after 150.583 msecs [117856.890034] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [117856.970961] PM: resume of drv:battery dev:PNP0C0A:00 complete after 198.460 msecs [117857.000049] i8042 kbd 00:07: wake-up capability disabled by ACPI [117857.000324] PM: resume of drv:i915 dev:0000:00:02.0 complete after 378.550 msecs [117857.010495] ata5: SATA link down (SStatus 0 SControl 300) [117857.030068] ata6: SATA link down (SStatus 0 SControl 300) [117857.047708] PM: resume of drv:usb dev:1-3 complete after 424.413 msecs [117857.047735] PM: resume of drv: dev:ep_00 complete after 424.361 msecs [117857.047738] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.420 msecs [117857.047751] PM: resume of drv: dev:ep_01 complete after 424.417 msecs [117857.047764] PM: resume of drv: dev:ep_82 complete after 424.412 msecs [117857.047766] PM: resume of drv:scsi dev:host6 complete after 424.284 msecs [117857.047785] PM: resume of drv:scsi_host dev:host6 complete after 424.285 msecs [117857.047788] PM: resume of drv:scsi dev:target6:0:0 complete after 424.264 msecs [117857.047803] PM: resume of drv:sd dev:6:0:0:0 complete after 424.263 msecs [117857.047822] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.262 msecs [117857.190056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [117857.203462] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [117857.217202] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [117857.217207] ata2.00: configured for UDMA/66 [117859.630073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [117859.636136] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [117859.642341] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [117859.642472] ata1.00: configured for UDMA/133 [117859.690370] PM: resume of drv:sd dev:0:0:0:0 complete after 3066.973 msecs [117859.690404] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3066.955 msecs [117859.690408] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2670.488 msecs [117859.696657] PM: resume of devices complete after 3074.924 msecs [117859.697012] PM: resume devices took 3.070 seconds [117859.697051] PM: Finishing wakeup. [117859.697053] Restarting tasks ... done. [117859.763926] video LNXVIDEO:00: Restoring backlight state [117859.963517] r8169 0000:01:00.0: eth0: link down [117859.965169] ADDRCONF(NETDEV_UP): eth0: link is not ready [117859.982518] ADDRCONF(NETDEV_UP): wlan0: link is not ready [117862.009301] wlan0: authenticate with 00:0c:41:e2:f9:75 (try 1) [117862.010806] wlan0: authenticated [117862.010879] wlan0: associate with 00:0c:41:e2:f9:75 (try 1) [117862.013021] wlan0: RX AssocResp from 00:0c:41:e2:f9:75 (capab=0x411 status=0 aid=1) [117862.013027] wlan0: associated [117862.014861] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [117862.648161] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [117862.648180] /dev/vmnet: hub 0 does not exist, allocating memory. [117862.648202] /dev/vmnet: port on hub 0 successfully opened [117862.648217] bridge-wlan0: device is wireless, enabling SMAC [117862.648222] bridge-wlan0: up [117862.648227] bridge-wlan0: attached [117872.640026] wlan0: no IPv6 routers present [118714.365032] wlan0: deauthenticating from 00:0c:41:e2:f9:75 by local choice (reason=3) [118714.510219] cfg80211: All devices are disconnected, going to restore regulatory settings [118714.510227] cfg80211: Restoring regulatory settings [118714.510233] cfg80211: Calling CRDA to update world regulatory domain [118714.511945] bridge-wlan0: disabling the bridge [118714.560049] bridge-wlan0: down [118714.560060] bridge-wlan0: detached [118714.561657] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [118714.561676] /dev/vmnet: hub 0 does not exist, allocating memory. [118714.561699] /dev/vmnet: port on hub 0 successfully opened [118714.561714] bridge-wlan0: device is wireless, enabling SMAC [118714.561718] bridge-wlan0: up [118714.561825] bridge-wlan0: attached [118714.607161] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [118714.607167] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607170] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [118714.607173] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607175] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [118714.607178] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607181] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [118714.607183] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607186] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [118714.607189] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607191] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [118714.607194] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607196] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [118714.607199] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607201] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [118714.607204] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607207] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [118714.607210] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607212] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [118714.607215] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607217] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [118714.607221] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [118714.607223] cfg80211: Disabling freq 2467 MHz [118714.607225] cfg80211: Disabling freq 2472 MHz [118714.607227] cfg80211: Disabling freq 2484 MHz [118714.607232] cfg80211: World regulatory domain updated: [118714.607234] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [118714.607237] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [118714.607240] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [118714.607242] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [118714.607245] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [118714.607248] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [118714.663492] bridge-wlan0: disabling the bridge on dev down [118714.710066] bridge-wlan0: down [118714.714654] bridge-wlan0: detached [118716.705056] PM: Syncing filesystems ... done. [118716.723749] PM: Preparing system for mem sleep [118717.290175] Freezing user space processes ... (elapsed 0.01 seconds) done. [118717.310106] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [118717.330095] PM: Entering mem sleep [118717.330151] Suspending console(s) (use no_console_suspend to debug) [118717.331035] sd 0:0:0:0: [sda] Synchronizing SCSI cache [118717.331128] sd 0:0:0:0: [sda] Stopping disk [118717.414785] i8042 aux 00:08: wake-up capability disabled by ACPI [118717.417770] i8042 kbd 00:07: wake-up capability enabled by ACPI [118717.417960] ehci_hcd 0000:00:1d.7: PCI INT B disabled [118717.417973] uhci_hcd 0000:00:1d.2: PCI INT D disabled [118717.417985] uhci_hcd 0000:00:1d.1: PCI INT C disabled [118717.417996] uhci_hcd 0000:00:1d.0: PCI INT B disabled [118717.418011] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [118717.418026] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [118717.418087] HDA Intel 0000:00:1b.0: PCI INT A disabled [118717.418143] ACPI handle has no context! [118717.418214] ehci_hcd 0000:00:1a.7: PCI INT D disabled [118717.418235] uhci_hcd 0000:00:1a.2: PCI INT C disabled [118717.418250] uhci_hcd 0000:00:1a.1: PCI INT B disabled [118717.418262] uhci_hcd 0000:00:1a.0: PCI INT A disabled [118718.236922] PM: suspend of drv:sd dev:0:0:0:0 complete after 905.891 msecs [118718.236936] PM: suspend of drv:scsi dev:target0:0:0 complete after 905.864 msecs [118718.236958] PM: suspend of drv:scsi dev:host0 complete after 905.714 msecs [118718.250030] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 832.166 msecs [118718.250041] PM: suspend of drv: dev:pci0000:00 complete after 831.407 msecs [118718.250050] PM: suspend of devices complete after 919.305 msecs [118718.250054] PM: suspend devices took 0.920 seconds [118718.330327] PM: late suspend of devices complete after 80.269 msecs [118718.330474] ACPI: Preparing to enter system sleep state S3 [118718.580085] PM: Saving platform NVS memory [118718.581263] Disabling non-boot CPUs ... [118718.690029] CPU 1 is now offline [118718.690475] Back to C! [118718.690475] PM: Restoring platform NVS memory [118718.690475] Enabling non-boot CPUs ... [118718.690475] Booting Node 0 Processor 1 APIC 0x1 [118718.860567] Switched to NOHz mode on CPU #1 [118718.872337] CPU1 is up [118718.873528] ACPI: Waking up from system sleep state S3 [118719.170240] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [118719.170247] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [118719.170305] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [118719.170341] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [118719.170377] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [118719.170418] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [118719.170463] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [118719.170469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [118719.170512] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [118719.170518] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [118719.170576] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [118719.170582] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [118719.170637] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [118719.170672] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [118719.170707] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [118719.170748] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [118719.170779] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [118719.170784] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [118719.170789] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [118719.170800] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [118719.170884] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [118719.170947] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [118719.170968] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [118719.171044] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [118719.171701] PM: early resume of devices complete after 1.595 msecs [118719.171783] i915 0000:00:02.0: setting latency timer to 64 [118719.171884] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [118719.171890] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [118719.171916] usb usb3: root hub lost power or was reset [118719.171930] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [118719.171935] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [118719.171959] usb usb4: root hub lost power or was reset [118719.171972] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [118719.171978] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [118719.172002] usb usb5: root hub lost power or was reset [118719.172022] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [118719.172034] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [118719.172083] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [118719.172089] HDA Intel 0000:00:1b.0: setting latency timer to 64 [118719.172136] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [118719.172184] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [118719.172195] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [118719.172203] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [118719.172209] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [118719.172233] usb usb6: root hub lost power or was reset [118719.172246] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [118719.172252] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [118719.172275] usb usb7: root hub lost power or was reset [118719.172287] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [118719.172293] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [118719.172317] usb usb8: root hub lost power or was reset [118719.172330] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [118719.172336] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [118719.172379] pci 0000:00:1e.0: setting latency timer to 64 [118719.172397] ahci 0000:00:1f.2: setting latency timer to 64 [118719.175776] sd 0:0:0:0: [sda] Starting disk [118719.300073] PM: resume of drv:usb dev:usb6 complete after 124.668 msecs [118719.300088] PM: resume of drv:hub dev:6-0:1.0 complete after 124.667 msecs [118719.300096] PM: resume of drv: dev:ep_00 complete after 124.638 msecs [118719.300101] PM: resume of drv: dev:ep_81 complete after 124.662 msecs [118719.300120] PM: resume of drv:usb dev:usb7 complete after 124.642 msecs [118719.300129] PM: resume of drv:hub dev:7-0:1.0 complete after 124.628 msecs [118719.300137] PM: resume of drv: dev:ep_00 complete after 124.598 msecs [118719.300142] PM: resume of drv: dev:ep_81 complete after 124.622 msecs [118719.300161] PM: resume of drv:usb dev:usb8 complete after 124.602 msecs [118719.300171] PM: resume of drv:hub dev:8-0:1.0 complete after 124.589 msecs [118719.300178] PM: resume of drv: dev:ep_00 complete after 124.556 msecs [118719.300184] PM: resume of drv: dev:ep_81 complete after 124.583 msecs [118719.300203] PM: resume of drv:usb dev:usb5 complete after 124.885 msecs [118719.300212] PM: resume of drv:hub dev:5-0:1.0 complete after 124.872 msecs [118719.300220] PM: resume of drv: dev:ep_00 complete after 124.841 msecs [118719.300225] PM: resume of drv: dev:ep_81 complete after 124.866 msecs [118719.300245] PM: resume of drv:usb dev:usb4 complete after 125.009 msecs [118719.300256] PM: resume of drv:hub dev:4-0:1.0 complete after 124.997 msecs [118719.300263] PM: resume of drv: dev:ep_00 complete after 124.964 msecs [118719.300269] PM: resume of drv: dev:ep_81 complete after 124.990 msecs [118719.300288] PM: resume of drv:usb dev:usb3 complete after 125.135 msecs [118719.300297] PM: resume of drv:hub dev:3-0:1.0 complete after 125.120 msecs [118719.300305] PM: resume of drv: dev:ep_00 complete after 125.088 msecs [118719.300310] PM: resume of drv: dev:ep_81 complete after 125.113 msecs [118719.317209] PM: resume of drv:button dev:PNP0C0D:00 complete after 145.360 msecs [118719.320080] PM: resume of drv:usb dev:usb1 complete after 145.154 msecs [118719.320100] PM: resume of drv:hub dev:1-0:1.0 complete after 145.037 msecs [118719.320146] PM: resume of drv: dev:ep_00 complete after 145.075 msecs [118719.320186] PM: resume of drv: dev:ep_81 complete after 145.119 msecs [118719.440052] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [118719.536283] PM: resume of drv:battery dev:PNP0C0A:00 complete after 219.001 msecs [118719.540153] ata6: SATA link down (SStatus 0 SControl 300) [118719.544757] i8042 kbd 00:07: wake-up capability disabled by ACPI [118719.544787] PM: resume of drv:i915 dev:0000:00:02.0 complete after 373.009 msecs [118719.561110] ata5: SATA link down (SStatus 0 SControl 300) [118719.597610] PM: resume of drv:usb dev:1-3 complete after 421.934 msecs [118719.597651] PM: resume of drv: dev:ep_00 complete after 421.898 msecs [118719.597655] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 421.957 msecs [118719.597669] PM: resume of drv: dev:ep_01 complete after 421.953 msecs [118719.597684] PM: resume of drv: dev:ep_82 complete after 421.951 msecs [118719.597687] PM: resume of drv:scsi dev:host6 complete after 421.827 msecs [118719.597711] PM: resume of drv:scsi_host dev:host6 complete after 421.831 msecs [118719.597714] PM: resume of drv:scsi dev:target6:0:0 complete after 421.811 msecs [118719.597733] PM: resume of drv:sd dev:6:0:0:0 complete after 421.812 msecs [118719.597755] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 421.813 msecs [118719.650025] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414779046448178 new 18445414772765689305 attempts 1 [118719.720074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [118719.733493] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [118719.747253] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [118719.747257] ata2.00: configured for UDMA/66 [118722.170077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [118722.176143] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [118722.182358] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [118722.182489] ata1.00: configured for UDMA/133 [118722.227419] PM: resume of drv:sd dev:0:0:0:0 complete after 3051.642 msecs [118722.227451] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3051.622 msecs [118722.227454] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2661.903 msecs [118722.233172] PM: resume of devices complete after 3061.435 msecs [118722.233544] PM: resume devices took 3.060 seconds [118722.233582] PM: Finishing wakeup. [118722.233584] Restarting tasks ... done. [118722.286431] video LNXVIDEO:00: Restoring backlight state [118722.510247] r8169 0000:01:00.0: eth0: link down [118722.511726] ADDRCONF(NETDEV_UP): eth0: link is not ready [118722.534510] ADDRCONF(NETDEV_UP): wlan0: link is not ready [118723.553463] ADDRCONF(NETDEV_UP): wlan0: link is not ready [118724.807821] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [118724.809206] wlan0: authenticated [118724.809289] wlan0: associate with 00:19:92:09:80:01 (try 1) [118724.811723] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=3) [118724.811728] wlan0: associated [118724.813750] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [118724.815865] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [118724.815882] /dev/vmnet: hub 0 does not exist, allocating memory. [118724.815905] /dev/vmnet: port on hub 0 successfully opened [118724.815920] bridge-wlan0: device is wireless, enabling SMAC [118724.815924] bridge-wlan0: up [118724.819944] bridge-wlan0: attached [118726.650083] usb 6-1: new full speed USB device using uhci_hcd and address 22 [118726.846606] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input20 [118726.846927] generic-usb 0003:046D:C525.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [118726.852268] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input21 [118726.852588] generic-usb 0003:046D:C525.000C: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [118734.840029] wlan0: no IPv6 routers present [123518.520066] usb 2-5: new high speed USB device using ehci_hcd and address 124 [123518.672199] scsi27 : usb-storage 2-5:1.0 [123519.671211] scsi 27:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [123519.672479] sd 27:0:0:0: Attached scsi generic sg3 type 0 [123519.675683] sd 27:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [123519.677938] sd 27:0:0:0: [sdc] Test WP failed, assume Write Enabled [123519.677947] sd 27:0:0:0: [sdc] Assuming drive cache: write through [123519.681565] sd 27:0:0:0: [sdc] Test WP failed, assume Write Enabled [123519.681575] sd 27:0:0:0: [sdc] Assuming drive cache: write through [123519.722940] sdc: sdc1 [123519.725165] sd 27:0:0:0: [sdc] Test WP failed, assume Write Enabled [123519.725172] sd 27:0:0:0: [sdc] Assuming drive cache: write through [123519.725245] sd 27:0:0:0: [sdc] Attached SCSI disk [123821.271812] wlan0: deauthenticating from 00:19:92:09:80:01 by local choice (reason=3) [123821.294246] cfg80211: All devices are disconnected, going to restore regulatory settings [123821.294253] cfg80211: Restoring regulatory settings [123821.294261] cfg80211: Calling CRDA to update world regulatory domain [123821.298682] bridge-wlan0: disabling the bridge on dev down [123821.300082] bridge-wlan0: down [123821.300557] bridge-wlan0: detached [123821.329553] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [123821.329570] /dev/vmnet: hub 0 does not exist, allocating memory. [123821.329591] /dev/vmnet: port on hub 0 successfully opened [123821.329611] bridge-wlan0: attached [123821.664565] ADDRCONF(NETDEV_UP): wlan0: link is not ready [123821.664580] bridge-wlan0: enabling the bridge on dev up [123821.664587] bridge-wlan0: device is wireless, enabling SMAC [123821.664596] bridge-wlan0: up [123821.664630] bridge-wlan0: disabling the bridge [123821.690084] bridge-wlan0: down [123821.690095] bridge-wlan0: detached [123822.617793] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [123822.619616] wlan0: authenticated [123822.619660] wlan0: associate with 00:19:92:09:80:01 (try 1) [123822.621912] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=2) [123822.621918] wlan0: associated [123822.624078] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [123822.627828] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [123822.627852] /dev/vmnet: hub 0 does not exist, allocating memory. [123822.627874] /dev/vmnet: port on hub 0 successfully opened [123822.627907] bridge-wlan0: device is wireless, enabling SMAC [123822.627911] bridge-wlan0: up [123822.630624] bridge-wlan0: attached [123824.555380] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123824.555385] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555387] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123824.555390] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555393] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123824.555396] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555398] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123824.555401] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555403] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123824.555406] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555408] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123824.555411] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555413] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123824.555416] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555419] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123824.555421] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555424] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123824.555427] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555429] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123824.555432] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555434] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123824.555437] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123824.555439] cfg80211: Disabling freq 2467 MHz [123824.555441] cfg80211: Disabling freq 2472 MHz [123824.555443] cfg80211: Disabling freq 2484 MHz [123824.555447] cfg80211: World regulatory domain updated: [123824.555448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [123824.555451] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123824.555454] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123824.555457] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123824.555460] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123824.555462] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123833.160025] wlan0: no IPv6 routers present [123863.070168] wlan0: deauthenticating from 00:19:92:09:80:01 by local choice (reason=3) [123863.124455] cfg80211: All devices are disconnected, going to restore regulatory settings [123863.124462] cfg80211: Restoring regulatory settings [123863.124469] cfg80211: Calling CRDA to update world regulatory domain [123863.129813] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123863.129818] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129822] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123863.129825] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129828] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123863.129831] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129833] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123863.129836] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129838] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123863.129841] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129843] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123863.129846] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129848] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123863.129851] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129854] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123863.129857] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129859] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123863.129862] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129864] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123863.129867] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129870] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123863.129873] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123863.129875] cfg80211: Disabling freq 2467 MHz [123863.129877] cfg80211: Disabling freq 2472 MHz [123863.129879] cfg80211: Disabling freq 2484 MHz [123863.129883] cfg80211: World regulatory domain updated: [123863.129884] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [123863.129887] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123863.129890] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123863.129893] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123863.129896] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123863.129900] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123863.213908] bridge-wlan0: disabling the bridge on dev down [123863.250074] bridge-wlan0: down [123863.380597] bridge-wlan0: detached [123863.380699] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [123863.380714] /dev/vmnet: hub 0 does not exist, allocating memory. [123863.380737] /dev/vmnet: port on hub 0 successfully opened [123863.381374] bridge-wlan0: attached [123863.430453] ath5k 0000:02:00.0: PCI INT A disabled [123867.544449] cfg80211: Calling CRDA to update world regulatory domain [123867.552299] cfg80211: World regulatory domain updated: [123867.552305] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [123867.552309] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123867.552312] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123867.552314] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123867.552317] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123867.552320] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123867.690998] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [123867.691016] ath5k 0000:02:00.0: setting latency timer to 64 [123867.691101] ath5k 0000:02:00.0: registered as 'phy0' [123868.202359] ath: EEPROM regdomain: 0x0 [123868.202364] ath: EEPROM indicates default country code should be used [123868.202366] ath: doing EEPROM country->regdmn map search [123868.202370] ath: country maps to regdmn code: 0x3a [123868.202372] ath: Country alpha2 being used: US [123868.202374] ath: Regpair used: 0x3a [123868.202378] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123868.202382] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202384] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123868.202387] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202389] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123868.202392] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202394] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123868.202397] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202399] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123868.202402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202405] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123868.202407] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202410] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123868.202413] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202415] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123868.202418] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202420] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123868.202423] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202425] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123868.202428] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202431] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123868.202434] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [123868.202436] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [123868.202438] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [123868.202441] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [123868.210861] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123868.210865] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210869] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123868.210872] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210874] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123868.210877] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210880] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123868.210883] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210885] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123868.210888] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210890] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123868.210893] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210896] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123868.210898] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210901] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123868.210904] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210906] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123868.210909] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210911] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123868.210914] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210916] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123868.210919] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210922] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [123868.210925] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210927] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [123868.210930] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.210932] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [123868.210935] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [123868.212008] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [123868.215347] Registered led device: ath5k-phy0::rx [123868.216143] Registered led device: ath5k-phy0::tx [123868.216165] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [123868.314299] ADDRCONF(NETDEV_UP): wlan0: link is not ready [123868.314307] bridge-wlan0: enabling the bridge on dev up [123868.314314] bridge-wlan0: device is wireless, enabling SMAC [123868.314321] bridge-wlan0: up [123868.429075] cfg80211: Calling CRDA for country: US [123868.434204] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123868.434211] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434214] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123868.434217] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434219] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123868.434222] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434225] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123868.434227] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434230] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123868.434233] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434235] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123868.434238] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434240] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123868.434243] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434245] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123868.434249] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434251] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123868.434254] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434257] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123868.434259] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434262] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123868.434265] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123868.434267] cfg80211: Disabling freq 2467 MHz [123868.434269] cfg80211: Disabling freq 2472 MHz [123868.434270] cfg80211: Disabling freq 2484 MHz [123868.434275] cfg80211: Regulatory domain changed to country: US [123868.434277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [123868.434280] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [123868.434282] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [123868.434285] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123868.434288] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123868.434291] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123868.434293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [123869.373444] bridge-wlan0: disabling the bridge on dev down [123869.430090] bridge-wlan0: down [123869.441424] ADDRCONF(NETDEV_UP): wlan0: link is not ready [123869.441431] bridge-wlan0: enabling the bridge on dev up [123869.441439] bridge-wlan0: device is wireless, enabling SMAC [123869.441445] bridge-wlan0: up [123870.798647] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [123870.800481] wlan0: authenticated [123870.800520] wlan0: associate with 00:19:92:09:80:01 (try 1) [123870.802844] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=2) [123870.802849] wlan0: associated [123870.804662] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [123880.910024] wlan0: no IPv6 routers present [123904.021657] cfg80211: All devices are disconnected, going to restore regulatory settings [123904.021668] cfg80211: Restoring regulatory settings [123904.021684] cfg80211: Calling CRDA to update world regulatory domain [123904.028949] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123904.028956] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.028961] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123904.028966] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.028970] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123904.028974] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.028978] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123904.028983] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.028987] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123904.028992] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.028996] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123904.029000] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.029004] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123904.029009] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.029014] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123904.029019] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.029023] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123904.029028] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.029031] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123904.029036] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.029040] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123904.029045] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123904.029049] cfg80211: Disabling freq 2467 MHz [123904.029051] cfg80211: Disabling freq 2472 MHz [123904.029054] cfg80211: Disabling freq 2484 MHz [123904.029061] cfg80211: World regulatory domain updated: [123904.029064] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [123904.029069] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123904.029074] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123904.029078] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123904.029083] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123904.029087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123911.663459] bridge-wlan0: disabling the bridge on dev down [123911.710078] bridge-wlan0: down [123911.721072] ADDRCONF(NETDEV_UP): wlan0: link is not ready [123911.721080] bridge-wlan0: enabling the bridge on dev up [123911.721088] bridge-wlan0: device is wireless, enabling SMAC [123911.721095] bridge-wlan0: up [123957.148804] wlan0: authenticate with 00:19:92:09:58:41 (try 1) [123957.151220] wlan0: authenticated [123957.151269] wlan0: associate with 00:19:92:09:58:41 (try 1) [123957.156944] wlan0: RX AssocResp from 00:19:92:09:58:41 (capab=0x421 status=0 aid=1) [123957.156949] wlan0: associated [123957.158806] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [123958.012053] wlan0: deauthenticating from 00:19:92:09:58:41 by local choice (reason=3) [123958.040203] cfg80211: All devices are disconnected, going to restore regulatory settings [123958.040216] cfg80211: Restoring regulatory settings [123958.040244] cfg80211: Calling CRDA to update world regulatory domain [123958.048005] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [123958.048012] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048017] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [123958.048022] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048026] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [123958.048031] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048035] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [123958.048039] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048043] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [123958.048048] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048052] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [123958.048057] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048061] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [123958.048066] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048070] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [123958.048075] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048079] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [123958.048084] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048088] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [123958.048093] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048097] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [123958.048102] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [123958.048107] cfg80211: Disabling freq 2467 MHz [123958.048110] cfg80211: Disabling freq 2472 MHz [123958.048112] cfg80211: Disabling freq 2484 MHz [123958.048118] cfg80211: World regulatory domain updated: [123958.048121] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [123958.048126] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123958.048130] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123958.048135] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [123958.048139] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123958.048144] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [123967.450033] wlan0: no IPv6 routers present [123980.364900] bridge-wlan0: disabling the bridge on dev down [123980.390085] bridge-wlan0: down [123980.400918] ADDRCONF(NETDEV_UP): wlan0: link is not ready [123980.400924] bridge-wlan0: enabling the bridge on dev up [123980.400933] bridge-wlan0: device is wireless, enabling SMAC [123980.400938] bridge-wlan0: up [123981.197411] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [123981.202653] wlan0: authenticated [123981.202734] wlan0: associate with 00:19:92:09:80:01 (try 1) [123981.205136] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=4) [123981.205140] wlan0: associated [123981.207079] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [123982.354370] bridge-wlan0: disabling the bridge [123982.400090] bridge-wlan0: down [123982.400103] bridge-wlan0: detached [123982.400196] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [123982.400214] /dev/vmnet: hub 0 does not exist, allocating memory. [123982.400235] /dev/vmnet: port on hub 0 successfully opened [123982.400253] bridge-wlan0: device is wireless, enabling SMAC [123982.400257] bridge-wlan0: up [123982.400264] bridge-wlan0: attached [123991.490045] wlan0: no IPv6 routers present [124023.720585] usb 2-5: USB disconnect, address 124 [124045.240063] usb 2-5: new high speed USB device using ehci_hcd and address 125 [124045.393525] scsi28 : usb-storage 2-5:1.0 [124046.406915] scsi 28:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [124046.407642] sd 28:0:0:0: Attached scsi generic sg3 type 0 [124046.411160] sd 28:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [124046.412155] sd 28:0:0:0: [sdc] Test WP failed, assume Write Enabled [124046.412159] sd 28:0:0:0: [sdc] Assuming drive cache: write through [124046.414271] sd 28:0:0:0: [sdc] Test WP failed, assume Write Enabled [124046.414276] sd 28:0:0:0: [sdc] Assuming drive cache: write through [124046.452953] sdc: sdc1 [124046.456802] sd 28:0:0:0: [sdc] Test WP failed, assume Write Enabled [124046.456808] sd 28:0:0:0: [sdc] Assuming drive cache: write through [124046.456813] sd 28:0:0:0: [sdc] Attached SCSI disk [124262.170590] usb 2-5: USB disconnect, address 125 [128299.790089] usb 6-1: USB disconnect, address 22 [129186.500734] wlan0: deauthenticating from 00:19:92:09:80:01 by local choice (reason=3) [129186.540190] cfg80211: All devices are disconnected, going to restore regulatory settings [129186.540197] cfg80211: Restoring regulatory settings [129186.540220] cfg80211: Calling CRDA to update world regulatory domain [129186.581565] bridge-wlan0: disabling the bridge [129186.640055] bridge-wlan0: down [129186.640072] bridge-wlan0: detached [129186.734568] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [129186.734623] /dev/vmnet: hub 0 does not exist, allocating memory. [129186.734649] /dev/vmnet: port on hub 0 successfully opened [129186.734673] bridge-wlan0: attached [129186.734779] bridge-wlan0: detached [129186.734823] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [129186.734829] /dev/vmnet: hub 0 does not exist, allocating memory. [129186.734848] /dev/vmnet: port on hub 0 successfully opened [129186.734873] bridge-wlan0: attached [129186.734925] bridge-wlan0: detached [129186.734947] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [129186.734952] /dev/vmnet: hub 0 does not exist, allocating memory. [129186.734972] /dev/vmnet: port on hub 0 successfully opened [129186.734980] bridge-wlan0: attached [129187.942170] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [129187.942175] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942178] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [129187.942181] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942183] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [129187.942186] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942188] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [129187.942191] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942194] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [129187.942196] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942199] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [129187.942202] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942204] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [129187.942207] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942209] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [129187.942212] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942214] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [129187.942217] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942219] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [129187.942222] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942224] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [129187.942227] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [129187.942229] cfg80211: Disabling freq 2467 MHz [129187.942232] cfg80211: Disabling freq 2472 MHz [129187.942233] cfg80211: Disabling freq 2484 MHz [129187.942237] cfg80211: World regulatory domain updated: [129187.942239] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [129187.942242] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [129187.942244] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [129187.942247] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [129187.942250] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [129187.942253] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [129192.673331] PM: Syncing filesystems ... done. [129192.676792] PM: Preparing system for mem sleep [129192.890208] Freezing user space processes ... (elapsed 0.01 seconds) done. [129192.910117] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [129192.930083] PM: Entering mem sleep [129192.930133] Suspending console(s) (use no_console_suspend to debug) [129192.931018] sd 0:0:0:0: [sda] Synchronizing SCSI cache [129193.018752] i8042 aux 00:08: wake-up capability disabled by ACPI [129193.019433] sd 0:0:0:0: [sda] Stopping disk [129193.021726] i8042 kbd 00:07: wake-up capability enabled by ACPI [129193.022144] ehci_hcd 0000:00:1d.7: PCI INT B disabled [129193.022159] uhci_hcd 0000:00:1d.2: PCI INT D disabled [129193.022170] uhci_hcd 0000:00:1d.1: PCI INT C disabled [129193.022182] uhci_hcd 0000:00:1d.0: PCI INT B disabled [129193.022195] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [129193.022199] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [129193.022220] ehci_hcd 0000:00:1a.7: PCI INT D disabled [129193.022231] uhci_hcd 0000:00:1a.2: PCI INT C disabled [129193.022242] uhci_hcd 0000:00:1a.1: PCI INT B disabled [129193.022259] uhci_hcd 0000:00:1a.0: PCI INT A disabled [129193.130367] HDA Intel 0000:00:1b.0: PCI INT A disabled [129193.130406] ACPI handle has no context! [129193.150016] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 127.813 msecs [129193.915354] PM: suspend of drv:sd dev:0:0:0:0 complete after 984.342 msecs [129193.915367] PM: suspend of drv:scsi dev:target0:0:0 complete after 984.310 msecs [129193.915389] PM: suspend of drv:scsi dev:host0 complete after 984.124 msecs [129193.930019] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 907.923 msecs [129193.930040] PM: suspend of drv: dev:pci0000:00 complete after 907.458 msecs [129193.930049] PM: suspend of devices complete after 999.326 msecs [129193.930053] PM: suspend devices took 1.000 seconds [129193.950107] r8169 0000:01:00.0: PME# enabled [129194.000024] r8169 0000:01:00.0: wake-up capability enabled by ACPI [129194.060339] PM: late suspend of devices complete after 130.280 msecs [129194.060485] ACPI: Preparing to enter system sleep state S3 [129194.310086] PM: Saving platform NVS memory [129194.311497] Disabling non-boot CPUs ... [129194.430058] CPU 1 is now offline [129194.430501] Back to C! [129194.430501] PM: Restoring platform NVS memory [129194.430501] Enabling non-boot CPUs ... [129194.430501] Booting Node 0 Processor 1 APIC 0x1 [129194.600569] Switched to NOHz mode on CPU #1 [129194.612173] CPU1 is up [129194.613369] ACPI: Waking up from system sleep state S3 [129194.810011] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414772765689305 new 18445414758290689306 attempts 1 [129194.910241] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [129194.910248] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [129194.910306] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [129194.910342] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [129194.910377] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [129194.910419] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [129194.910464] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [129194.910470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [129194.910513] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [129194.910519] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [129194.910577] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [129194.910583] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [129194.910638] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [129194.910673] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [129194.910708] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [129194.910749] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [129194.910780] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [129194.910784] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [129194.910789] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [129194.910800] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [129194.910885] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [129194.910947] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [129194.910969] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [129194.911044] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [129194.911700] PM: early resume of devices complete after 1.591 msecs [129194.911784] i915 0000:00:02.0: setting latency timer to 64 [129194.911849] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [129194.911855] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [129194.911880] usb usb3: root hub lost power or was reset [129194.911894] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [129194.911900] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [129194.911924] usb usb4: root hub lost power or was reset [129194.911937] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [129194.911942] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [129194.911965] usb usb5: root hub lost power or was reset [129194.911979] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [129194.911985] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [129194.912042] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [129194.912053] HDA Intel 0000:00:1b.0: setting latency timer to 64 [129194.912108] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [129194.912155] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [129194.912165] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [129194.912174] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [129194.912180] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [129194.912203] usb usb6: root hub lost power or was reset [129194.912216] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [129194.912222] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [129194.912245] usb usb7: root hub lost power or was reset [129194.912258] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [129194.912263] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [129194.912287] usb usb8: root hub lost power or was reset [129194.912301] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [129194.912307] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [129194.912350] pci 0000:00:1e.0: setting latency timer to 64 [129194.912369] ahci 0000:00:1f.2: setting latency timer to 64 [129194.913587] sd 0:0:0:0: [sda] Starting disk [129195.032616] r8169 0000:01:00.0: wake-up capability disabled by ACPI [129195.032625] r8169 0000:01:00.0: PME# disabled [129195.035093] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 122.664 msecs [129195.040108] PM: resume of drv:usb dev:usb7 complete after 126.825 msecs [129195.040119] PM: resume of drv:hub dev:7-0:1.0 complete after 126.813 msecs [129195.040127] PM: resume of drv: dev:ep_00 complete after 126.780 msecs [129195.040133] PM: resume of drv: dev:ep_81 complete after 126.806 msecs [129195.040151] PM: resume of drv:usb dev:usb5 complete after 127.080 msecs [129195.040160] PM: resume of drv:hub dev:5-0:1.0 complete after 127.057 msecs [129195.040168] PM: resume of drv: dev:ep_00 complete after 127.009 msecs [129195.040173] PM: resume of drv: dev:ep_81 complete after 127.042 msecs [129195.040191] PM: resume of drv:usb dev:usb6 complete after 127.003 msecs [129195.040199] PM: resume of drv:hub dev:6-0:1.0 complete after 126.981 msecs [129195.040207] PM: resume of drv: dev:ep_00 complete after 126.945 msecs [129195.040212] PM: resume of drv: dev:ep_81 complete after 126.972 msecs [129195.040229] PM: resume of drv:usb dev:usb8 complete after 126.862 msecs [129195.040238] PM: resume of drv:hub dev:8-0:1.0 complete after 126.847 msecs [129195.040245] PM: resume of drv: dev:ep_00 complete after 126.813 msecs [129195.040250] PM: resume of drv: dev:ep_81 complete after 126.839 msecs [129195.040268] PM: resume of drv:usb dev:usb4 complete after 127.311 msecs [129195.040278] PM: resume of drv:hub dev:4-0:1.0 complete after 127.291 msecs [129195.040285] PM: resume of drv: dev:ep_00 complete after 127.242 msecs [129195.040290] PM: resume of drv: dev:ep_81 complete after 127.276 msecs [129195.040308] PM: resume of drv:usb dev:usb3 complete after 127.464 msecs [129195.040317] PM: resume of drv:hub dev:3-0:1.0 complete after 127.442 msecs [129195.040323] PM: resume of drv: dev:ep_00 complete after 127.394 msecs [129195.040328] PM: resume of drv: dev:ep_81 complete after 127.426 msecs [129195.044090] PM: resume of drv:button dev:PNP0C0D:00 complete after 131.565 msecs [129195.060236] PM: resume of drv:usb dev:usb1 complete after 147.572 msecs [129195.060268] PM: resume of drv:hub dev:1-0:1.0 complete after 147.596 msecs [129195.060280] PM: resume of drv: dev:ep_00 complete after 147.586 msecs [129195.060283] PM: resume of drv: dev:ep_81 complete after 147.600 msecs [129195.080106] PM: resume of drv:usb dev:usb2 complete after 167.408 msecs [129195.080117] PM: resume of drv:hub dev:2-0:1.0 complete after 167.356 msecs [129195.080124] PM: resume of drv: dev:ep_81 complete after 167.334 msecs [129195.080140] PM: resume of drv: dev:ep_00 complete after 167.322 msecs [129195.180050] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [129195.241053] PM: resume of drv:battery dev:PNP0C0A:00 complete after 196.892 msecs [129195.260085] ata5: SATA link down (SStatus 0 SControl 300) [129195.265608] i8042 kbd 00:07: wake-up capability disabled by ACPI [129195.280308] ata6: SATA link down (SStatus 0 SControl 300) [129195.286433] PM: resume of drv:i915 dev:0000:00:02.0 complete after 374.655 msecs [129195.337723] PM: resume of drv:usb dev:1-3 complete after 424.238 msecs [129195.337761] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.257 msecs [129195.337765] PM: resume of drv: dev:ep_00 complete after 424.200 msecs [129195.337781] PM: resume of drv: dev:ep_01 complete after 424.259 msecs [129195.337784] PM: resume of drv:scsi dev:host6 complete after 424.115 msecs [129195.337787] PM: resume of drv: dev:ep_82 complete after 424.247 msecs [129195.337793] PM: resume of drv:scsi_host dev:host6 complete after 424.107 msecs [129195.337796] PM: resume of drv:scsi dev:target6:0:0 complete after 424.090 msecs [129195.337815] PM: resume of drv:sd dev:6:0:0:0 complete after 424.090 msecs [129195.337835] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.091 msecs [129195.520055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [129195.533470] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [129195.547206] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [129195.547211] ata2.00: configured for UDMA/66 [129197.950074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [129197.956137] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [129197.962360] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [129197.962492] ata1.00: configured for UDMA/133 [129198.012131] PM: resume of drv:sd dev:0:0:0:0 complete after 3098.545 msecs [129198.012164] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2725.648 msecs [129198.012167] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3098.527 msecs [129198.019206] PM: resume of devices complete after 3107.471 msecs [129198.019562] PM: resume devices took 3.100 seconds [129198.019602] PM: Finishing wakeup. [129198.019604] Restarting tasks ... done. [129198.103839] video LNXVIDEO:00: Restoring backlight state [129198.461556] r8169 0000:01:00.0: eth0: link down [129198.462951] ADDRCONF(NETDEV_UP): eth0: link is not ready [129198.479667] ADDRCONF(NETDEV_UP): wlan0: link is not ready [129198.479678] bridge-wlan0: enabling the bridge on dev up [129198.479684] bridge-wlan0: device is wireless, enabling SMAC [129198.479690] bridge-wlan0: up [129225.720066] usb 2-5: new high speed USB device using ehci_hcd and address 126 [129225.910127] generic-usb 0003:045E:0772.000D: hiddev0,hidraw0: USB HID v1.01 Device [Microsoft Microsoft® LifeCam Studio(TM)] on usb-0000:00:1d.7-5/input4 [129226.164000] Linux video capture interface: v2.00 [129227.470229] 126:3:1: cannot get freq at ep 0x82 [129227.532027] usbcore: registered new interface driver snd-usb-audio [129227.532369] uvcvideo: Unknown video format 3032344d-0000-0010-8000-00aa00389b71 [129227.532382] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam Studio(TM) (045e:0772) [129227.592051] input: Microsoft® LifeCam Studio(TM) as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input22 [129227.593526] usbcore: registered new interface driver uvcvideo [129227.593531] USB Video Class driver (v1.0.0) [129229.780236] 126:3:1: cannot get freq at ep 0x82 [129231.260097] 126:3:1: cannot get freq at ep 0x82 [129235.003417] bridge-wlan0: disabling the bridge on dev down [129235.030143] bridge-wlan0: down [129235.040356] bridge-wlan0: enabling the bridge on dev up [129235.040363] bridge-wlan0: device is wireless, enabling SMAC [129235.040369] bridge-wlan0: up [129235.041955] wlan0: Trigger new scan to find an IBSS to join [129236.135590] wlan0: Selected IBSS BSSID 02:00:00:f3:03:a9 based on configured SSID [129236.165931] bridge-wlan0: disabling the bridge [129236.174859] bridge-wlan0: down [129236.174875] bridge-wlan0: detached [129236.174977] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [129236.174997] /dev/vmnet: hub 0 does not exist, allocating memory. [129236.175033] /dev/vmnet: port on hub 0 successfully opened [129236.175053] bridge-wlan0: device is wireless, enabling SMAC [129236.175061] bridge-wlan0: up [129236.175070] bridge-wlan0: attached [129245.280037] wlan0: no IPv6 routers present [138659.930374] usb 2-5: USB disconnect, address 126 [143518.254326] bridge-wlan0: disabling the bridge on dev down [143518.290061] bridge-wlan0: down [143518.295402] bridge-wlan0: detached [143518.368362] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [143518.368381] /dev/vmnet: hub 0 does not exist, allocating memory. [143518.368407] /dev/vmnet: port on hub 0 successfully opened [143518.368434] bridge-wlan0: attached [143525.486598] PM: Syncing filesystems ... done. [143525.592946] PM: Preparing system for mem sleep [143525.770209] Freezing user space processes ... (elapsed 0.01 seconds) done. [143525.790112] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [143525.810098] PM: Entering mem sleep [143525.810151] Suspending console(s) (use no_console_suspend to debug) [143525.811037] sd 0:0:0:0: [sda] Synchronizing SCSI cache [143525.811140] sd 0:0:0:0: [sda] Stopping disk [143525.894032] i8042 aux 00:08: wake-up capability disabled by ACPI [143525.898186] i8042 kbd 00:07: wake-up capability enabled by ACPI [143525.898329] ehci_hcd 0000:00:1d.7: PCI INT B disabled [143525.898343] uhci_hcd 0000:00:1d.2: PCI INT D disabled [143525.898355] uhci_hcd 0000:00:1d.1: PCI INT C disabled [143525.898367] uhci_hcd 0000:00:1d.0: PCI INT B disabled [143525.898382] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [143525.898396] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [143525.898599] ehci_hcd 0000:00:1a.7: PCI INT D disabled [143525.898611] uhci_hcd 0000:00:1a.2: PCI INT C disabled [143525.898621] uhci_hcd 0000:00:1a.1: PCI INT B disabled [143525.898630] uhci_hcd 0000:00:1a.0: PCI INT A disabled [143526.110087] HDA Intel 0000:00:1b.0: PCI INT A disabled [143526.110125] ACPI handle has no context! [143526.130016] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 231.611 msecs [143526.679339] PM: suspend of drv:sd dev:0:0:0:0 complete after 868.307 msecs [143526.679352] PM: suspend of drv:scsi dev:target0:0:0 complete after 868.276 msecs [143526.679374] PM: suspend of drv:scsi dev:host0 complete after 868.085 msecs [143526.690020] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 791.747 msecs [143526.690031] PM: suspend of drv: dev:pci0000:00 complete after 791.195 msecs [143526.690041] PM: suspend of devices complete after 879.299 msecs [143526.690044] PM: suspend devices took 0.880 seconds [143526.710107] r8169 0000:01:00.0: PME# enabled [143526.760025] r8169 0000:01:00.0: wake-up capability enabled by ACPI [143526.820312] PM: late suspend of devices complete after 130.264 msecs [143526.820461] ACPI: Preparing to enter system sleep state S3 [143527.070085] PM: Saving platform NVS memory [143527.071489] Disabling non-boot CPUs ... [143527.180063] CPU 1 is now offline [143527.180485] Back to C! [143527.180485] PM: Restoring platform NVS memory [143527.180485] Enabling non-boot CPUs ... [143527.180485] Booting Node 0 Processor 1 APIC 0x1 [143527.350575] Switched to NOHz mode on CPU #1 [143527.362168] CPU1 is up [143527.363359] ACPI: Waking up from system sleep state S3 [143527.660239] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [143527.660246] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [143527.660304] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [143527.660340] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [143527.660375] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [143527.660416] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [143527.660461] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [143527.660467] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [143527.660510] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [143527.660516] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [143527.660574] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [143527.660580] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [143527.660635] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [143527.660670] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [143527.660705] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [143527.660746] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [143527.660777] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [143527.660782] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [143527.660787] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [143527.660797] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [143527.660882] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [143527.660944] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [143527.660966] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [143527.661042] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [143527.661698] PM: early resume of devices complete after 1.592 msecs [143527.661781] i915 0000:00:02.0: setting latency timer to 64 [143527.661888] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [143527.661894] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [143527.661920] usb usb3: root hub lost power or was reset [143527.661934] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [143527.661940] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [143527.661964] usb usb4: root hub lost power or was reset [143527.661982] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [143527.661995] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [143527.662025] usb usb5: root hub lost power or was reset [143527.662040] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [143527.662046] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [143527.662093] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [143527.662099] HDA Intel 0000:00:1b.0: setting latency timer to 64 [143527.662147] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [143527.662195] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [143527.662206] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [143527.662215] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [143527.662221] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [143527.662245] usb usb6: root hub lost power or was reset [143527.662258] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [143527.662263] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [143527.662287] usb usb7: root hub lost power or was reset [143527.662299] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [143527.662305] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [143527.662329] usb usb8: root hub lost power or was reset [143527.662347] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [143527.662359] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [143527.662406] pci 0000:00:1e.0: setting latency timer to 64 [143527.662424] ahci 0000:00:1f.2: setting latency timer to 64 [143527.663425] sd 0:0:0:0: [sda] Starting disk [143527.790136] PM: resume of drv:usb dev:usb5 complete after 127.177 msecs [143527.790152] PM: resume of drv:hub dev:5-0:1.0 complete after 127.176 msecs [143527.790160] PM: resume of drv: dev:ep_00 complete after 127.142 msecs [143527.790166] PM: resume of drv: dev:ep_81 complete after 127.170 msecs [143527.790185] PM: resume of drv:usb dev:usb7 complete after 127.063 msecs [143527.790195] PM: resume of drv:hub dev:7-0:1.0 complete after 127.051 msecs [143527.790203] PM: resume of drv: dev:ep_00 complete after 127.021 msecs [143527.790209] PM: resume of drv: dev:ep_81 complete after 127.046 msecs [143527.790228] PM: resume of drv:usb dev:usb8 complete after 127.026 msecs [143527.790237] PM: resume of drv:hub dev:8-0:1.0 complete after 127.011 msecs [143527.790244] PM: resume of drv: dev:ep_00 complete after 126.979 msecs [143527.790251] PM: resume of drv: dev:ep_81 complete after 127.005 msecs [143527.790269] PM: resume of drv:usb dev:usb6 complete after 127.231 msecs [143527.790279] PM: resume of drv:hub dev:6-0:1.0 complete after 127.217 msecs [143527.790286] PM: resume of drv: dev:ep_00 complete after 127.185 msecs [143527.790291] PM: resume of drv: dev:ep_81 complete after 127.211 msecs [143527.790310] PM: resume of drv:usb dev:usb4 complete after 127.437 msecs [143527.790321] PM: resume of drv:hub dev:4-0:1.0 complete after 127.426 msecs [143527.790328] PM: resume of drv: dev:ep_00 complete after 127.395 msecs [143527.790334] PM: resume of drv: dev:ep_81 complete after 127.420 msecs [143527.790354] PM: resume of drv:usb dev:usb3 complete after 127.563 msecs [143527.790364] PM: resume of drv:hub dev:3-0:1.0 complete after 127.551 msecs [143527.790372] PM: resume of drv: dev:ep_00 complete after 127.518 msecs [143527.790377] PM: resume of drv: dev:ep_81 complete after 127.543 msecs [143527.810051] PM: resume of drv:usb dev:usb1 complete after 147.388 msecs [143527.810066] PM: resume of drv:hub dev:1-0:1.0 complete after 147.399 msecs [143527.810074] PM: resume of drv: dev:ep_00 complete after 147.399 msecs [143527.810101] PM: resume of drv: dev:ep_81 complete after 147.430 msecs [143527.815583] r8169 0000:01:00.0: wake-up capability disabled by ACPI [143527.815593] r8169 0000:01:00.0: PME# disabled [143527.818053] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 155.568 msecs [143527.825756] PM: resume of drv:button dev:PNP0C0D:00 complete after 163.902 msecs [143527.920016] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414758290689306 new 18445414719468689339 attempts 1 [143527.930099] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [143528.024538] PM: resume of drv:battery dev:PNP0C0A:00 complete after 198.711 msecs [143528.030078] ata5: SATA link down (SStatus 0 SControl 300) [143528.050089] ata6: SATA link down (SStatus 0 SControl 300) [143528.052318] i8042 kbd 00:07: wake-up capability disabled by ACPI [143528.073520] PM: resume of drv:i915 dev:0000:00:02.0 complete after 411.744 msecs [143528.087595] PM: resume of drv:usb dev:1-3 complete after 424.275 msecs [143528.087629] PM: resume of drv: dev:ep_00 complete after 424.228 msecs [143528.087632] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.290 msecs [143528.087645] PM: resume of drv: dev:ep_01 complete after 424.285 msecs [143528.087656] PM: resume of drv: dev:ep_82 complete after 424.276 msecs [143528.087659] PM: resume of drv:scsi dev:host6 complete after 424.149 msecs [143528.087677] PM: resume of drv:scsi_host dev:host6 complete after 424.146 msecs [143528.087679] PM: resume of drv:scsi dev:target6:0:0 complete after 424.128 msecs [143528.087696] PM: resume of drv:sd dev:6:0:0:0 complete after 424.127 msecs [143528.087715] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.125 msecs [143528.270057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [143528.283467] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [143528.297206] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [143528.297210] ata2.00: configured for UDMA/66 [143528.920079] /dev/vmmon[3]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414719468689339 new 18445414719469959760 attempts 1 [143530.680072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [143530.686136] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [143530.692353] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [143530.692486] ata1.00: configured for UDMA/133 [143530.738361] PM: resume of drv:sd dev:0:0:0:0 complete after 3074.937 msecs [143530.738394] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2664.776 msecs [143530.738401] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3074.918 msecs [143530.744704] PM: resume of devices complete after 3082.972 msecs [143530.745057] PM: resume devices took 3.080 seconds [143530.745095] PM: Finishing wakeup. [143530.745097] Restarting tasks ... done. [143530.785449] video LNXVIDEO:00: Restoring backlight state [143531.048280] r8169 0000:01:00.0: eth0: link down [143531.049606] ADDRCONF(NETDEV_UP): eth0: link is not ready [143531.064722] bridge-wlan0: enabling the bridge on dev up [143531.064731] bridge-wlan0: device is wireless, enabling SMAC [143531.064738] bridge-wlan0: up [143531.064762] bridge-wlan0: disabling the bridge [143531.090188] bridge-wlan0: down [143531.090201] bridge-wlan0: detached [143531.090285] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [143531.090300] /dev/vmnet: hub 0 does not exist, allocating memory. [143531.090324] /dev/vmnet: port on hub 0 successfully opened [143531.090339] bridge-wlan0: device is wireless, enabling SMAC [143531.090343] bridge-wlan0: up [143531.143320] ADDRCONF(NETDEV_UP): wlan0: link is not ready [143531.143355] bridge-wlan0: attached [143531.143450] bridge-wlan0: disabling the bridge [143531.180275] bridge-wlan0: down [143531.180289] bridge-wlan0: detached [143531.180385] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [143531.180400] /dev/vmnet: hub 0 does not exist, allocating memory. [143531.180423] /dev/vmnet: port on hub 0 successfully opened [143531.180438] bridge-wlan0: device is wireless, enabling SMAC [143531.180443] bridge-wlan0: up [143531.182049] bridge-wlan0: attached [143531.182147] bridge-wlan0: disabling the bridge [143531.230088] bridge-wlan0: down [143531.230100] bridge-wlan0: detached [143531.230155] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [143531.230171] /dev/vmnet: hub 0 does not exist, allocating memory. [143531.230192] /dev/vmnet: port on hub 0 successfully opened [143531.230206] bridge-wlan0: device is wireless, enabling SMAC [143531.230211] bridge-wlan0: up [143531.230216] bridge-wlan0: attached [143531.230252] bridge-wlan0: disabling the bridge [143531.270108] bridge-wlan0: down [143531.270119] bridge-wlan0: detached [143531.270197] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [143531.270212] /dev/vmnet: hub 0 does not exist, allocating memory. [143531.270235] /dev/vmnet: port on hub 0 successfully opened [143531.270250] bridge-wlan0: device is wireless, enabling SMAC [143531.270254] bridge-wlan0: up [143531.270260] bridge-wlan0: attached [143532.504508] bridge-wlan0: disabling the bridge on dev down [143532.540054] bridge-wlan0: down [143532.553359] ADDRCONF(NETDEV_UP): wlan0: link is not ready [143532.553372] bridge-wlan0: enabling the bridge on dev up [143532.553380] bridge-wlan0: device is wireless, enabling SMAC [143532.553387] bridge-wlan0: up [143533.802164] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [143533.803571] wlan0: authenticated [143533.803623] wlan0: associate with 00:19:92:09:80:01 (try 1) [143533.806065] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=2) [143533.806069] wlan0: associated [143533.808269] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [143533.810546] bridge-wlan0: disabling the bridge [143533.820060] usb 6-1: new full speed USB device using uhci_hcd and address 23 [143533.850103] bridge-wlan0: down [143533.850119] bridge-wlan0: detached [143533.850221] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [143533.850236] /dev/vmnet: hub 0 does not exist, allocating memory. [143533.850259] /dev/vmnet: port on hub 0 successfully opened [143533.850276] bridge-wlan0: device is wireless, enabling SMAC [143533.850281] bridge-wlan0: up [143533.850286] bridge-wlan0: attached [143534.025524] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input23 [143534.025752] generic-usb 0003:046D:C525.000E: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [143534.031292] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input24 [143534.031554] generic-usb 0003:046D:C525.000F: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [143543.850026] wlan0: no IPv6 routers present [146708.070051] usb 2-5: new high speed USB device using ehci_hcd and address 2 [146708.222247] scsi29 : usb-storage 2-5:1.0 [146709.266179] scsi 29:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [146709.266970] sd 29:0:0:0: Attached scsi generic sg3 type 0 [146709.267522] sd 29:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [146709.269259] sd 29:0:0:0: [sdc] Test WP failed, assume Write Enabled [146709.269267] sd 29:0:0:0: [sdc] Assuming drive cache: write through [146709.273312] sd 29:0:0:0: [sdc] Test WP failed, assume Write Enabled [146709.273319] sd 29:0:0:0: [sdc] Assuming drive cache: write through [146709.312700] sdc: sdc1 [146709.315415] sd 29:0:0:0: [sdc] Test WP failed, assume Write Enabled [146709.315422] sd 29:0:0:0: [sdc] Assuming drive cache: write through [146709.315428] sd 29:0:0:0: [sdc] Attached SCSI disk [150098.050634] usb 2-5: USB disconnect, address 2 [156555.734771] bridge-wlan0: disabling the bridge [156555.740102] wlan0: deauthenticating from 00:19:92:09:80:01 by local choice (reason=3) [156555.770101] bridge-wlan0: down [156555.770115] bridge-wlan0: detached [156555.773926] wlan0: authenticate with 00:19:92:09:58:41 (try 1) [156555.775327] wlan0: authenticated [156555.810311] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [156555.810331] /dev/vmnet: hub 0 does not exist, allocating memory. [156555.810354] /dev/vmnet: port on hub 0 successfully opened [156555.810375] bridge-wlan0: device is wireless, enabling SMAC [156555.810380] bridge-wlan0: up [156555.831754] wlan0: associate with 00:19:92:09:58:41 (try 1) [156555.831817] bridge-wlan0: attached [156555.834076] wlan0: RX AssocResp from 00:19:92:09:58:41 (capab=0x421 status=0 aid=2) [156555.834082] wlan0: associated [156556.114989] bridge-wlan0: disabling the bridge [156556.150067] bridge-wlan0: down [156556.150082] bridge-wlan0: detached [156556.150193] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [156556.150209] /dev/vmnet: hub 0 does not exist, allocating memory. [156556.150230] /dev/vmnet: port on hub 0 successfully opened [156556.150247] bridge-wlan0: device is wireless, enabling SMAC [156556.150253] bridge-wlan0: up [156556.150259] bridge-wlan0: attached [156795.334989] wlan0: deauthenticating from 00:19:92:09:58:41 by local choice (reason=3) [156795.353736] wlan0: authenticate with 00:19:92:09:80:01 (try 1) [156795.355128] wlan0: authenticated [156795.421435] bridge-wlan0: disabling the bridge [156795.421744] wlan0: associate with 00:19:92:09:80:01 (try 1) [156795.423979] wlan0: RX AssocResp from 00:19:92:09:80:01 (capab=0x421 status=0 aid=2) [156795.423984] wlan0: associated [156795.480054] bridge-wlan0: down [156795.480068] bridge-wlan0: detached [156795.493162] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [156795.493182] /dev/vmnet: hub 0 does not exist, allocating memory. [156795.493207] /dev/vmnet: port on hub 0 successfully opened [156795.493227] bridge-wlan0: device is wireless, enabling SMAC [156795.493232] bridge-wlan0: up [156795.493238] bridge-wlan0: attached [156795.493364] bridge-wlan0: disabling the bridge [156795.530055] bridge-wlan0: down [156795.530066] bridge-wlan0: detached [156795.530138] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [156795.530151] /dev/vmnet: hub 0 does not exist, allocating memory. [156795.530172] /dev/vmnet: port on hub 0 successfully opened [156795.530184] bridge-wlan0: device is wireless, enabling SMAC [156795.530188] bridge-wlan0: up [156795.530193] bridge-wlan0: attached [158423.752666] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [158423.752672] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158423.758991] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [158423.758996] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158428.688332] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [158428.688338] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158428.694727] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [158428.694733] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158430.662186] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [158430.662191] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158430.668403] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [158430.668409] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158432.455346] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [158432.455350] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [158432.462140] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [158432.462144] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [159349.720055] usb 2-3: new high speed USB device using ehci_hcd and address 3 [159349.873856] scsi30 : usb-storage 2-3:1.0 [159350.877106] scsi 30:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [159350.877881] sd 30:0:0:0: Attached scsi generic sg3 type 0 [159350.878967] sd 30:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [159350.879836] sd 30:0:0:0: [sdc] Test WP failed, assume Write Enabled [159350.879842] sd 30:0:0:0: [sdc] Assuming drive cache: write through [159350.883463] sd 30:0:0:0: [sdc] Test WP failed, assume Write Enabled [159350.883470] sd 30:0:0:0: [sdc] Assuming drive cache: write through [159350.920134] sdc: sdc1 [159350.922335] sd 30:0:0:0: [sdc] Test WP failed, assume Write Enabled [159350.922340] sd 30:0:0:0: [sdc] Assuming drive cache: write through [159350.922346] sd 30:0:0:0: [sdc] Attached SCSI disk [159451.240037] usb 2-3: reset high speed USB device using ehci_hcd and address 3 [160208.930654] usb 2-3: USB disconnect, address 3 [162440.290074] usb 6-1: USB disconnect, address 23 [162496.833180] wlan0: deauthenticating from 00:19:92:09:80:01 by local choice (reason=3) [162496.860152] cfg80211: All devices are disconnected, going to restore regulatory settings [162496.860158] cfg80211: Restoring regulatory settings [162496.860177] cfg80211: Calling CRDA to update world regulatory domain [162496.891631] bridge-wlan0: disabling the bridge [162496.950087] bridge-wlan0: down [162496.950100] bridge-wlan0: detached [162496.993423] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [162496.993439] /dev/vmnet: hub 0 does not exist, allocating memory. [162496.993460] /dev/vmnet: port on hub 0 successfully opened [162496.993478] bridge-wlan0: attached [162496.993546] bridge-wlan0: detached [162496.993566] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [162496.993571] /dev/vmnet: hub 0 does not exist, allocating memory. [162496.993590] /dev/vmnet: port on hub 0 successfully opened [162496.993598] bridge-wlan0: attached [162496.993627] bridge-wlan0: detached [162496.993653] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [162496.993659] /dev/vmnet: hub 0 does not exist, allocating memory. [162496.993680] /dev/vmnet: port on hub 0 successfully opened [162496.993687] bridge-wlan0: attached [162498.528039] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [162498.528047] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528052] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [162498.528056] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528061] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [162498.528066] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528069] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [162498.528074] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528078] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [162498.528083] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528087] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [162498.528091] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528095] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [162498.528100] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528104] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [162498.528109] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528112] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [162498.528117] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528121] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [162498.528126] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528130] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [162498.528134] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [162498.528138] cfg80211: Disabling freq 2467 MHz [162498.528141] cfg80211: Disabling freq 2472 MHz [162498.528144] cfg80211: Disabling freq 2484 MHz [162498.528149] cfg80211: World regulatory domain updated: [162498.528153] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [162498.528158] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [162498.528162] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [162498.528167] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [162498.528171] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [162498.528176] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [162502.231999] PM: Syncing filesystems ... done. [162502.354582] PM: Preparing system for mem sleep [162503.090366] Freezing user space processes ... (elapsed 0.01 seconds) done. [162503.110100] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [162503.130088] PM: Entering mem sleep [162503.130141] Suspending console(s) (use no_console_suspend to debug) [162503.131012] sd 0:0:0:0: [sda] Synchronizing SCSI cache [162503.131126] sd 0:0:0:0: [sda] Stopping disk [162503.212372] i8042 aux 00:08: wake-up capability disabled by ACPI [162503.215463] i8042 kbd 00:07: wake-up capability enabled by ACPI [162503.215576] ehci_hcd 0000:00:1d.7: PCI INT B disabled [162503.215590] uhci_hcd 0000:00:1d.2: PCI INT D disabled [162503.215603] uhci_hcd 0000:00:1d.1: PCI INT C disabled [162503.215616] uhci_hcd 0000:00:1d.0: PCI INT B disabled [162503.215645] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [162503.215879] ehci_hcd 0000:00:1a.7: PCI INT D disabled [162503.215890] uhci_hcd 0000:00:1a.2: PCI INT C disabled [162503.215901] uhci_hcd 0000:00:1a.1: PCI INT B disabled [162503.215914] uhci_hcd 0000:00:1a.0: PCI INT A disabled [162503.216004] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [162503.320370] HDA Intel 0000:00:1b.0: PCI INT A disabled [162503.320406] ACPI handle has no context! [162503.340017] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 124.364 msecs [162504.012504] PM: suspend of drv:sd dev:0:0:0:0 complete after 881.498 msecs [162504.012517] PM: suspend of drv:scsi dev:target0:0:0 complete after 881.468 msecs [162504.012532] PM: suspend of drv:scsi dev:host0 complete after 881.259 msecs [162504.030018] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 814.473 msecs [162504.030037] PM: suspend of drv: dev:pci0000:00 complete after 814.022 msecs [162504.030048] PM: suspend of devices complete after 899.313 msecs [162504.030051] PM: suspend devices took 0.900 seconds [162504.050130] r8169 0000:01:00.0: PME# enabled [162504.100026] r8169 0000:01:00.0: wake-up capability enabled by ACPI [162504.160328] PM: late suspend of devices complete after 130.272 msecs [162504.160475] ACPI: Preparing to enter system sleep state S3 [162504.410085] PM: Saving platform NVS memory [162504.411303] Disabling non-boot CPUs ... [162504.560054] CPU 1 is now offline [162504.560518] Back to C! [162504.560518] PM: Restoring platform NVS memory [162504.560518] Enabling non-boot CPUs ... [162504.560518] Booting Node 0 Processor 1 APIC 0x1 [162504.590013] /dev/vmmon[5819]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414719469959760 new 18445414705701959760 attempts 1 [162504.730544] Switched to NOHz mode on CPU #1 [162504.734534] CPU1 is up [162504.735708] ACPI: Waking up from system sleep state S3 [162505.030240] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [162505.030247] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [162505.030305] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [162505.030341] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [162505.030376] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [162505.030418] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [162505.030464] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [162505.030470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [162505.030513] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [162505.030519] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [162505.030577] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [162505.030583] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [162505.030638] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [162505.030674] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [162505.030709] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [162505.030749] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [162505.030780] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [162505.030785] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [162505.030790] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [162505.030801] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [162505.030885] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [162505.030948] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b) [162505.030969] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004) [162505.031045] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [162505.031702] PM: early resume of devices complete after 1.594 msecs [162505.031784] i915 0000:00:02.0: setting latency timer to 64 [162505.031942] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [162505.031948] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [162505.031978] usb usb3: root hub lost power or was reset [162505.032000] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [162505.032012] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [162505.032035] usb usb4: root hub lost power or was reset [162505.032049] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [162505.032054] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [162505.032078] usb usb5: root hub lost power or was reset [162505.032093] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18 [162505.032099] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [162505.032150] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [162505.032156] HDA Intel 0000:00:1b.0: setting latency timer to 64 [162505.032203] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [162505.032250] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [162505.032261] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [162505.032270] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [162505.032276] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [162505.032299] usb usb6: root hub lost power or was reset [162505.032312] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [162505.032317] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [162505.032341] usb usb7: root hub lost power or was reset [162505.032353] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17 [162505.032365] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [162505.032401] usb usb8: root hub lost power or was reset [162505.032415] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [162505.032421] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [162505.032465] pci 0000:00:1e.0: setting latency timer to 64 [162505.032483] ahci 0000:00:1f.2: setting latency timer to 64 [162505.033418] sd 0:0:0:0: [sda] Starting disk [162505.160082] PM: resume of drv:usb dev:usb3 complete after 127.276 msecs [162505.160125] PM: resume of drv:usb dev:usb4 complete after 127.244 msecs [162505.160152] PM: resume of drv:usb dev:usb5 complete after 127.192 msecs [162505.160181] PM: resume of drv:usb dev:usb6 complete after 127.142 msecs [162505.160190] PM: resume of drv:hub dev:3-0:1.0 complete after 127.323 msecs [162505.160200] PM: resume of drv: dev:ep_81 complete after 127.356 msecs [162505.160203] PM: resume of drv:usb dev:usb7 complete after 127.088 msecs [162505.160216] PM: resume of drv: dev:ep_00 complete after 127.120 msecs [162505.160231] PM: resume of drv: dev:ep_00 complete after 127.050 msecs [162505.160234] PM: resume of drv:usb dev:usb8 complete after 127.032 msecs [162505.160246] PM: resume of drv:hub dev:7-0:1.0 complete after 127.107 msecs [162505.160255] PM: resume of drv: dev:ep_81 complete after 127.097 msecs [162505.160257] PM: resume of drv: dev:ep_00 complete after 127.395 msecs [162505.160269] PM: resume of drv: dev:ep_00 complete after 127.008 msecs [162505.160271] PM: resume of drv:hub dev:4-0:1.0 complete after 127.365 msecs [162505.160282] PM: resume of drv:hub dev:8-0:1.0 complete after 127.059 msecs [162505.160285] PM: resume of drv: dev:ep_00 complete after 127.343 msecs [162505.160290] PM: resume of drv: dev:ep_81 complete after 127.048 msecs [162505.160293] PM: resume of drv:hub dev:5-0:1.0 complete after 127.308 msecs [162505.160305] PM: resume of drv: dev:ep_81 complete after 127.382 msecs [162505.160307] PM: resume of drv: dev:ep_00 complete after 127.286 msecs [162505.160319] PM: resume of drv: dev:ep_81 complete after 127.317 msecs [162505.160321] PM: resume of drv:hub dev:6-0:1.0 complete after 127.260 msecs [162505.160330] PM: resume of drv: dev:ep_81 complete after 127.252 msecs [162505.164279] r8169 0000:01:00.0: wake-up capability disabled by ACPI [162505.164286] r8169 0000:01:00.0: PME# disabled [162505.166723] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 134.182 msecs [162505.175156] PM: resume of drv:button dev:PNP0C0D:00 complete after 143.286 msecs [162505.180080] PM: resume of drv:usb dev:usb1 complete after 147.403 msecs [162505.180103] PM: resume of drv:hub dev:1-0:1.0 complete after 147.418 msecs [162505.180113] PM: resume of drv: dev:ep_00 complete after 147.421 msecs [162505.180164] PM: resume of drv: dev:ep_81 complete after 147.476 msecs [162505.200069] PM: resume of drv:usb dev:usb2 complete after 167.372 msecs [162505.200094] PM: resume of drv:hub dev:2-0:1.0 complete after 167.348 msecs [162505.200097] PM: resume of drv: dev:ep_00 complete after 167.310 msecs [162505.200104] PM: resume of drv: dev:ep_81 complete after 167.339 msecs [162505.300067] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [162505.394780] PM: resume of drv:battery dev:PNP0C0A:00 complete after 219.551 msecs [162505.396922] PM: resume of drv:i915 dev:0000:00:02.0 complete after 365.143 msecs [162505.403154] i8042 kbd 00:07: wake-up capability disabled by ACPI [162505.420392] ata5: SATA link down (SStatus 0 SControl 300) [162505.440069] ata6: SATA link down (SStatus 0 SControl 300) [162505.457610] PM: resume of drv:usb dev:1-3 complete after 424.292 msecs [162505.457636] PM: resume of drv: dev:ep_00 complete after 424.244 msecs [162505.457639] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 424.300 msecs [162505.457653] PM: resume of drv: dev:ep_01 complete after 424.298 msecs [162505.457664] PM: resume of drv: dev:ep_82 complete after 424.292 msecs [162505.457672] PM: resume of drv:scsi dev:host6 complete after 424.167 msecs [162505.457689] PM: resume of drv:scsi_host dev:host6 complete after 424.170 msecs [162505.457692] PM: resume of drv:scsi dev:target6:0:0 complete after 424.151 msecs [162505.457711] PM: resume of drv:sd dev:6:0:0:0 complete after 424.152 msecs [162505.457730] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 424.152 msecs [162505.590061] /dev/vmmon[3]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445414705701959760 new 18445414705703261979 attempts 1 [162505.600083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [162505.613491] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [162505.627231] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04) [162505.627236] ata2.00: configured for UDMA/66 [162508.090073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [162508.096133] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [162508.102342] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [162508.102473] ata1.00: configured for UDMA/133 [162508.149832] PM: resume of drv:sd dev:0:0:0:0 complete after 3116.416 msecs [162508.149867] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3116.398 msecs [162508.149870] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2726.167 msecs [162508.155709] PM: resume of devices complete after 3123.971 msecs [162508.156070] PM: resume devices took 3.120 seconds [162508.156109] PM: Finishing wakeup. [162508.156111] Restarting tasks ... done. [162508.240565] video LNXVIDEO:00: Restoring backlight state [162508.448459] r8169 0000:01:00.0: eth0: link down [162508.450294] ADDRCONF(NETDEV_UP): eth0: link is not ready [162508.469547] ADDRCONF(NETDEV_UP): wlan0: link is not ready [162508.469559] bridge-wlan0: enabling the bridge on dev up [162508.469567] bridge-wlan0: device is wireless, enabling SMAC [162508.469575] bridge-wlan0: up [162510.808355] wlan0: authenticate with 00:0c:41:e2:f9:75 (try 1) [162510.809870] wlan0: authenticated [162510.809949] wlan0: associate with 00:0c:41:e2:f9:75 (try 1) [162510.812206] wlan0: RX AssocResp from 00:0c:41:e2:f9:75 (capab=0x411 status=0 aid=1) [162510.812212] wlan0: associated [162510.814111] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [162510.825770] bridge-wlan0: disabling the bridge [162510.870048] bridge-wlan0: down [162510.870060] bridge-wlan0: detached [162510.870152] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [162510.870168] /dev/vmnet: hub 0 does not exist, allocating memory. [162510.870193] /dev/vmnet: port on hub 0 successfully opened [162510.870207] bridge-wlan0: device is wireless, enabling SMAC [162510.870212] bridge-wlan0: up [162510.870218] bridge-wlan0: attached [162521.230028] wlan0: no IPv6 routers present [162527.590095] usb 2-1: new high speed USB device using ehci_hcd and address 4 [162527.748758] scsi31 : usb-storage 2-1:1.0 [162528.741205] scsi 31:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [162528.746285] sd 31:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [162528.746313] sd 31:0:0:0: Attached scsi generic sg3 type 0 [162528.747185] sd 31:0:0:0: [sdc] Test WP failed, assume Write Enabled [162528.747192] sd 31:0:0:0: [sdc] Assuming drive cache: write through [162528.750368] sd 31:0:0:0: [sdc] Test WP failed, assume Write Enabled [162528.750374] sd 31:0:0:0: [sdc] Assuming drive cache: write through [162528.786345] sdc: sdc1 [162528.788430] sd 31:0:0:0: [sdc] Test WP failed, assume Write Enabled [162528.788436] sd 31:0:0:0: [sdc] Assuming drive cache: write through [162528.788442] sd 31:0:0:0: [sdc] Attached SCSI disk [162531.170087] usb 7-1: new full speed USB device using uhci_hcd and address 4 [162531.368747] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input25 [162531.368968] generic-usb 0003:046D:C525.0010: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [162531.375773] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input26 [162531.376067] generic-usb 0003:046D:C525.0011: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [162541.180066] usb 2-5: new high speed USB device using ehci_hcd and address 6 [162541.333172] scsi32 : usb-storage 2-5:1.0 [162542.331058] scsi 32:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [162542.332375] sd 32:0:0:0: Attached scsi generic sg4 type 0 [162542.335348] sd 32:0:0:0: [sdd] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) [162542.338316] sd 32:0:0:0: [sdd] Test WP failed, assume Write Enabled [162542.338321] sd 32:0:0:0: [sdd] Assuming drive cache: write through [162542.341426] sd 32:0:0:0: [sdd] Test WP failed, assume Write Enabled [162542.341432] sd 32:0:0:0: [sdd] Assuming drive cache: write through [162542.346681] sdd: sdd1 [162542.353009] sd 32:0:0:0: [sdd] Test WP failed, assume Write Enabled [162542.353015] sd 32:0:0:0: [sdd] Assuming drive cache: write through [162542.353021] sd 32:0:0:0: [sdd] Attached SCSI disk [162803.847419] nautilus[1947]: segfault at 18 ip 00000000004d4b0e sp 00007fff9c86e050 error 4 in nautilus[400000+1c6000] [169273.190056] usb 2-5: reset high speed USB device using ehci_hcd and address 6 [174673.140056] usb 2-5: reset high speed USB device using ehci_hcd and address 6 [181873.160080] usb 2-5: reset high speed USB device using ehci_hcd and address 6 [183537.400247] usb 2-1: USB disconnect, address 4 [183612.090198] usb 2-5: USB disconnect, address 6 [183647.790081] usb 7-1: USB disconnect, address 4 [214890.861981] bridge-wlan0: disabling the bridge [214890.900261] bridge-wlan0: down [214890.900273] bridge-wlan0: detached [214890.940292] cfg80211: All devices are disconnected, going to restore regulatory settings [214890.940300] cfg80211: Restoring regulatory settings [214890.940305] cfg80211: Calling CRDA to update world regulatory domain [214890.945339] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [214890.945357] /dev/vmnet: hub 0 does not exist, allocating memory. [214890.945381] /dev/vmnet: port on hub 0 successfully opened [214890.945401] bridge-wlan0: device is wireless, enabling SMAC [214890.945406] bridge-wlan0: up [214890.945411] bridge-wlan0: attached [214891.316386] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [214891.316392] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316394] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [214891.316397] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316400] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [214891.316403] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316405] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [214891.316408] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316410] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [214891.316413] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316415] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [214891.316418] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316421] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [214891.316424] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316426] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [214891.316429] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316431] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [214891.316434] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316436] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [214891.316439] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316442] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [214891.316445] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [214891.316447] cfg80211: Disabling freq 2467 MHz [214891.316449] cfg80211: Disabling freq 2472 MHz [214891.316450] cfg80211: Disabling freq 2484 MHz [214891.316454] cfg80211: World regulatory domain updated: [214891.316456] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [214891.316459] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214891.316462] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [214891.316464] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [214891.316467] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214891.316470] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214891.837030] wlan0: authenticate with 00:0c:41:e2:f9:75 (try 1) [214891.838528] wlan0: authenticated [214891.838606] wlan0: associate with 00:0c:41:e2:f9:75 (try 1) [214891.840817] wlan0: RX AssocResp from 00:0c:41:e2:f9:75 (capab=0x411 status=0 aid=1) [214891.840823] wlan0: associated [214891.866823] bridge-wlan0: disabling the bridge [214891.910086] bridge-wlan0: down [214891.910100] bridge-wlan0: detached [214891.910201] /dev/vmnet: open called by PID 1426 (vmnet-bridge) [214891.910217] /dev/vmnet: hub 0 does not exist, allocating memory. [214891.910240] /dev/vmnet: port on hub 0 successfully opened [214891.910255] bridge-wlan0: device is wireless, enabling SMAC [214891.910260] bridge-wlan0: up [214891.910266] bridge-wlan0: attached [232066.142761] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [232066.142767] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [232066.149840] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [232066.149845] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [232075.226125] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [232075.226132] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [232075.232800] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [232075.232806] atkbd serio0: Use 'setkeycodes e058 ' to make it known.