[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-12-server (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 (Ubuntu 3.0.0-12.20-server 3.0.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-server root=UUID=fab07744-f256-4c4f-9c48-a687d3668dc7 ro quiet single [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Dell Inc. PowerEdge 2950/0CU542, BIOS 1.5.1 08/10/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FE0000000 write-back [ 0.000000] 5 base 220000000 mask FF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcffa8 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa8000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cffa8000 page 4k [ 0.000000] kernel direct mapping tables up to cffa8000 @ cffa2000-cffa8000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ 22fff6000-230000000 [ 0.000000] RAMDISK: 364d6000 - 37263000 [ 0.000000] ACPI: RSDP 00000000000f25d0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f2650 0004C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000000f2758 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cffa8000 03C9F (v01 DELL PE_SC3 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000cffb7c00 00040 [ 0.000000] ACPI: APIC 00000000000f284c 000E0 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000000f292d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000000f297d 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000000f29b5 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff] [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000cffa8 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096952 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833504 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec84000] gsi_base[160]) [ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec84000, GSI 160-183 [ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec84800] gsi_base[224]) [ 0.000000] IOAPIC[3]: apic_id 11, version 32, address 0xfec84800, GSI 224-247 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 264 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000 [ 0.000000] PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000 [ 0.000000] PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s79616 r8192 d22784 u262144 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065586 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-server root=UUID=fab07744-f256-4c4f-9c48-a687d3668dc7 ro quiet single [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8174524k/9175040k available (6186k kernel code, 787232k absent, 213284k reserved, 6936k data, 904k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:2048 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.797 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.59 BogoMIPS (lpj=7979188) [ 0.004011] pid_max: default: 32768 minimum: 301 [ 0.004041] Security Framework initialized [ 0.004062] AppArmor: AppArmor initialized [ 0.004064] Yama: becoming mindful. [ 0.005044] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012141] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.014069] Mount-cache hash table entries: 256 [ 0.014274] Initializing cgroup subsys cpuacct [ 0.014284] Initializing cgroup subsys memory [ 0.014295] Initializing cgroup subsys devices [ 0.014298] Initializing cgroup subsys freezer [ 0.014300] Initializing cgroup subsys net_cls [ 0.014302] Initializing cgroup subsys blkio [ 0.014313] Initializing cgroup subsys perf_event [ 0.014351] CPU: Physical Processor ID: 0 [ 0.014352] CPU: Processor Core ID: 0 [ 0.014355] mce: CPU supports 6 MCE banks [ 0.014364] CPU0: Thermal monitoring enabled (TM1) [ 0.014369] using mwait in idle threads. [ 0.017150] ACPI: Core revision 20110413 [ 0.018401] ftrace: allocating 26000 entries in 102 pages [ 0.020557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063433] CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 [ 0.064003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 9a000 [ 0.152109] #2 [ 0.152111] smpboot cpu 2: start_ip = 9a000 [ 0.244180] #3 [ 0.244184] smpboot cpu 3: start_ip = 9a000 [ 0.336028] Brought up 4 CPUs [ 0.336031] Total of 4 processors activated (15959.80 BogoMIPS). [ 0.338938] devtmpfs: initialized [ 0.341623] print_constraints: dummy: [ 0.341650] Time: 16:47:56 Date: 10/13/11 [ 0.341698] NET: Registered protocol family 16 [ 0.341712] Trying to unpack rootfs image as initramfs... [ 0.341856] ACPI: bus type pci registered [ 0.341926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.341930] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.380446] PCI: Using configuration type 1 for base access [ 0.381802] bio: create slab at 0 [ 0.381802] ACPI: EC: Look up EC in DSDT [ 0.384173] ACPI: Interpreter enabled [ 0.384176] ACPI: (supports S0 S4 S5) [ 0.384192] ACPI: Using IOAPIC for interrupt routing [ 0.388450] ACPI: No dock devices found. [ 0.388453] HEST: Table not found. [ 0.388457] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.388553] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.388730] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.388734] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.388737] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.388739] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfdffffff] (ignored) [ 0.388755] pci 0000:00:00.0: [8086:25c0] type 0 class 0x000600 [ 0.388798] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.388802] pci 0000:00:00.0: PME# disabled [ 0.388826] pci 0000:00:02.0: [8086:25e2] type 1 class 0x000604 [ 0.388864] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.388868] pci 0000:00:02.0: PME# disabled [ 0.388886] pci 0000:00:03.0: [8086:25e3] type 1 class 0x000604 [ 0.388922] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.388926] pci 0000:00:03.0: PME# disabled [ 0.388944] pci 0000:00:04.0: [8086:25f8] type 1 class 0x000604 [ 0.388981] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.388985] pci 0000:00:04.0: PME# disabled [ 0.389002] pci 0000:00:05.0: [8086:25e5] type 1 class 0x000604 [ 0.389038] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.389042] pci 0000:00:05.0: PME# disabled [ 0.389060] pci 0000:00:06.0: [8086:25f9] type 1 class 0x000604 [ 0.389096] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.389100] pci 0000:00:06.0: PME# disabled [ 0.389117] pci 0000:00:07.0: [8086:25e7] type 1 class 0x000604 [ 0.389153] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.389157] pci 0000:00:07.0: PME# disabled [ 0.389179] pci 0000:00:10.0: [8086:25f0] type 0 class 0x000600 [ 0.389210] pci 0000:00:10.1: [8086:25f0] type 0 class 0x000600 [ 0.389243] pci 0000:00:10.2: [8086:25f0] type 0 class 0x000600 [ 0.389278] pci 0000:00:11.0: [8086:25f1] type 0 class 0x000600 [ 0.389309] pci 0000:00:13.0: [8086:25f3] type 0 class 0x000600 [ 0.389341] pci 0000:00:15.0: [8086:25f5] type 0 class 0x000600 [ 0.389371] pci 0000:00:16.0: [8086:25f6] type 0 class 0x000600 [ 0.389410] pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604 [ 0.389466] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.389471] pci 0000:00:1c.0: PME# disabled [ 0.389501] pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03 [ 0.389554] pci 0000:00:1d.0: reg 20: [io 0xdce0-0xdcff] [ 0.389592] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03 [ 0.389633] pci 0000:00:1d.1: reg 20: [io 0xdcc0-0xdcdf] [ 0.389668] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03 [ 0.389709] pci 0000:00:1d.2: reg 20: [io 0xdca0-0xdcbf] [ 0.389751] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03 [ 0.389771] pci 0000:00:1d.7: reg 10: [mem 0xfc700400-0xfc7007ff] [ 0.389842] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.389847] pci 0000:00:1d.7: PME# disabled [ 0.389866] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.389922] pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601 [ 0.390007] pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101 [ 0.390021] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.390031] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.390040] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.390050] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.390060] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.390395] pci 0000:06:00.0: [8086:3500] type 1 class 0x000604 [ 0.392709] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.392800] pci 0000:06:00.0: PME# disabled [ 0.393626] pci 0000:06:00.3: [8086:350c] type 1 class 0x000604 [ 0.395967] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold [ 0.396069] pci 0000:06:00.3: PME# disabled [ 0.396757] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.396989] pci 0000:00:02.0: PCI bridge to [bus 06-0b] [ 0.396993] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.396998] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff] [ 0.397003] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.398777] pci 0000:07:00.0: [8086:3510] type 1 class 0x000604 [ 0.401401] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.401491] pci 0000:07:00.0: PME# disabled [ 0.402042] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.402364] pci 0000:07:01.0: [8086:3514] type 1 class 0x000604 [ 0.404987] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 0.405078] pci 0000:07:01.0: PME# disabled [ 0.405629] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.407006] pci 0000:06:00.0: PCI bridge to [bus 07-0a] [ 0.407098] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.407190] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.407373] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.409447] pci 0000:08:00.0: [1166:0103] type 1 class 0x000604 [ 0.411649] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.411740] pci 0000:08:00.0: PME# disabled [ 0.412437] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.412667] pci 0000:07:00.0: PCI bridge to [bus 08-09] [ 0.412758] pci 0000:07:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.412850] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.413033] pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.414778] pci 0000:09:00.0: [14e4:164c] type 0 class 0x000200 [ 0.415558] pci 0000:09:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.418090] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.418181] pci 0000:09:00.0: PME# disabled [ 0.419925] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 0.420117] pci 0000:08:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.420208] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.420392] pci 0000:08:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.422457] pci 0000:07:01.0: PCI bridge to [bus 0a-0a] [ 0.422548] pci 0000:07:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.422640] pci 0000:07:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.422824] pci 0000:07:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.426275] pci 0000:06:00.3: PCI bridge to [bus 0b-0b] [ 0.426365] pci 0000:06:00.3: bridge window [io 0xf000-0x0000] (disabled) [ 0.426457] pci 0000:06:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.426641] pci 0000:06:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.427089] pci 0000:01:00.0: [8086:0370] type 1 class 0x000604 [ 0.427141] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.427145] pci 0000:01:00.0: PME# disabled [ 0.427169] pci 0000:01:00.2: [8086:0372] type 1 class 0x000604 [ 0.427219] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.427223] pci 0000:01:00.2: PME# disabled [ 0.427241] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.427251] pci 0000:00:03.0: PCI bridge to [bus 01-03] [ 0.427255] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.427259] pci 0000:00:03.0: bridge window [mem 0xfc400000-0xfc6fffff] [ 0.427265] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 0.427329] pci 0000:02:0e.0: [1028:0015] type 0 class 0x000104 [ 0.427353] pci 0000:02:0e.0: reg 10: [mem 0xd80f0000-0xd80fffff pref] [ 0.427373] pci 0000:02:0e.0: reg 18: [mem 0xfc5e0000-0xfc5fffff] [ 0.427410] pci 0000:02:0e.0: reg 30: [mem 0xfc600000-0xfc607fff pref] [ 0.427439] pci 0000:02:0e.0: supports D1 [ 0.427471] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 0.427475] pci 0000:01:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.427479] pci 0000:01:00.0: bridge window [mem 0xfc500000-0xfc6fffff] [ 0.427485] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 0.427553] pci 0000:01:00.2: PCI bridge to [bus 03-03] [ 0.427557] pci 0000:01:00.2: bridge window [io 0xf000-0x0000] (disabled) [ 0.427562] pci 0000:01:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.427568] pci 0000:01:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.427606] pci 0000:00:04.0: PCI bridge to [bus 0c-0c] [ 0.427609] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.427613] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.427618] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.427648] pci 0000:00:05.0: PCI bridge to [bus 0d-0d] [ 0.427651] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.427655] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.427660] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.427698] pci 0000:0e:00.0: [8086:0329] type 1 class 0x000604 [ 0.427716] pci 0000:0e:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.427763] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold [ 0.427767] pci 0000:0e:00.0: PME# disabled [ 0.427789] pci 0000:0e:00.2: [8086:032a] type 1 class 0x000604 [ 0.427805] pci 0000:0e:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.427852] pci 0000:0e:00.2: PME# supported from D0 D3hot D3cold [ 0.427856] pci 0000:0e:00.2: PME# disabled [ 0.427873] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.427882] pci 0000:00:06.0: PCI bridge to [bus 0e-10] [ 0.427886] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.427889] pci 0000:00:06.0: bridge window [mem 0xfc300000-0xfc3fffff] [ 0.427895] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.427959] pci 0000:0e:00.0: PCI bridge to [bus 0f-0f] [ 0.427963] pci 0000:0e:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.427968] pci 0000:0e:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.427973] pci 0000:0e:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.428075] pci 0000:0e:00.2: PCI bridge to [bus 10-10] [ 0.428079] pci 0000:0e:00.2: bridge window [io 0xf000-0x0000] (disabled) [ 0.428083] pci 0000:0e:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.428089] pci 0000:0e:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.428128] pci 0000:00:07.0: PCI bridge to [bus 11-11] [ 0.428132] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.428136] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.428141] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.428199] pci 0000:04:00.0: [1166:0103] type 1 class 0x000604 [ 0.428266] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.428271] pci 0000:04:00.0: PME# disabled [ 0.428290] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.428300] pci 0000:00:1c.0: PCI bridge to [bus 04-05] [ 0.428304] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.428309] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.428315] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.428373] pci 0000:05:00.0: [14e4:164c] type 0 class 0x000200 [ 0.428399] pci 0000:05:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.428480] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.428486] pci 0000:05:00.0: PME# disabled [ 0.428543] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 0.428550] pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.428556] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.428563] pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.428624] pci 0000:12:0d.0: [1002:515e] type 0 class 0x000300 [ 0.428643] pci 0000:12:0d.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] [ 0.428654] pci 0000:12:0d.0: reg 14: [io 0xec00-0xecff] [ 0.428665] pci 0000:12:0d.0: reg 18: [mem 0xfc1f0000-0xfc1fffff] [ 0.428702] pci 0000:12:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.428722] pci 0000:12:0d.0: supports D1 D2 [ 0.428754] pci 0000:00:1e.0: PCI bridge to [bus 12-12] (subtractive decode) [ 0.428758] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.428762] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff] [ 0.428769] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.428772] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.428775] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.428809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.429112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.429188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] [ 0.429242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] [ 0.429313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] [ 0.429381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.429450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] [ 0.429508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.429576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 0.429646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHA._PRT] [ 0.429714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHB._PRT] [ 0.429779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] [ 0.429844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] [ 0.429898] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.429902] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.429904] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.433360] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) [ 0.433429] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.433496] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12) [ 0.433561] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12) [ 0.433625] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) [ 0.433690] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) [ 0.433753] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.433818] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.433966] vgaarb: device added: PCI:0000:12:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.433969] vgaarb: loaded [ 0.433971] vgaarb: bridge control possible 0000:12:0d.0 [ 0.434202] SCSI subsystem initialized [ 0.434264] libata version 3.00 loaded. [ 0.434264] usbcore: registered new interface driver usbfs [ 0.434264] usbcore: registered new interface driver hub [ 0.434264] usbcore: registered new device driver usb [ 0.434264] PCI: Using ACPI for IRQ routing [ 0.440573] PCI: pci_cache_line_size set to 64 bytes [ 0.441197] reserve RAM buffer: 00000000cffa8000 - 00000000cfffffff [ 0.441332] NetLabel: Initializing [ 0.441334] NetLabel: domain hash size = 128 [ 0.441336] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.441351] NetLabel: unlabeled traffic allowed by default [ 0.441402] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.441407] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.441413] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.452068] Switching to clocksource hpet [ 0.455616] Switched to NOHz mode on CPU #0 [ 0.455713] Switched to NOHz mode on CPU #1 [ 0.455736] Switched to NOHz mode on CPU #3 [ 0.455773] Switched to NOHz mode on CPU #2 [ 0.460377] AppArmor: AppArmor Filesystem Enabled [ 0.460425] pnp: PnP ACPI init [ 0.460446] ACPI: bus type pnp registered [ 0.460595] pnp 00:00: [bus 00-ff] [ 0.460598] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.460601] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.460604] pnp 00:00: [io 0x0d00-0xffff window] [ 0.460606] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.460609] pnp 00:00: [mem 0xd0000000-0xfdffffff window] [ 0.460670] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.460728] pnp 00:01: [io 0x0080-0x009f] [ 0.460731] pnp 00:01: [io 0x0000-0x001f] [ 0.460733] pnp 00:01: [io 0x00c0-0x00df] [ 0.460736] pnp 00:01: [dma 4] [ 0.460770] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.460793] pnp 00:02: [io 0x00f0-0x00ff] [ 0.460807] pnp 00:02: [irq 13] [ 0.460836] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.460859] pnp 00:03: [io 0x0061] [ 0.460948] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.460970] pnp 00:04: [io 0x0070-0x007f] [ 0.460976] pnp 00:04: [irq 8] [ 0.461011] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.461154] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 0.461316] pnp 00:06: [io 0x03f8-0x03ff] [ 0.461322] pnp 00:06: [irq 4] [ 0.461425] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.461589] pnp 00:07: [io 0x02f8-0x02ff] [ 0.461596] pnp 00:07: [irq 3] [ 0.461693] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.463802] pnp 00:08: [io 0x0800-0x087f] [ 0.463805] pnp 00:08: [io 0x0880-0x08bf] [ 0.463807] pnp 00:08: [io 0x08c0-0x08df] [ 0.463809] pnp 00:08: [io 0x08e0-0x08e3] [ 0.463811] pnp 00:08: [io 0x0c00-0x0c7f] [ 0.463813] pnp 00:08: [io 0x0ca0-0x0ca7] [ 0.463815] pnp 00:08: [io 0x0ca9-0x0cab] [ 0.463818] pnp 00:08: [io 0x0cad-0x0caf] [ 0.463824] pnp 00:08: [io 0x0060] [ 0.463826] pnp 00:08: [io 0x0064] [ 0.463891] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.463895] system 00:08: [io 0x0880-0x08bf] has been reserved [ 0.463897] system 00:08: [io 0x08c0-0x08df] has been reserved [ 0.463900] system 00:08: [io 0x08e0-0x08e3] has been reserved [ 0.463903] system 00:08: [io 0x0c00-0x0c7f] has been reserved [ 0.463906] system 00:08: [io 0x0ca0-0x0ca7] has been reserved [ 0.463909] system 00:08: [io 0x0ca9-0x0cab] has been reserved [ 0.463912] system 00:08: [io 0x0cad-0x0caf] has been reserved [ 0.463916] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.463968] pnp 00:09: [io 0x0ca8] [ 0.463971] pnp 00:09: [io 0x0cac] [ 0.464047] system 00:09: [io 0x0ca8] has been reserved [ 0.464050] system 00:09: [io 0x0cac] has been reserved [ 0.464054] system 00:09: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.464119] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.464181] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.464185] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.464222] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 0.464256] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.464436] pnp: PnP ACPI: found 12 devices [ 0.464438] ACPI: ACPI bus type pnp unregistered [ 0.470714] PCI: max bus depth: 4 pci_try_num: 5 [ 0.472125] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 0.472128] pci 0000:08:00.0: bridge window [io disabled] [ 0.472236] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.472328] pci 0000:08:00.0: bridge window [mem pref disabled] [ 0.472511] pci 0000:07:00.0: PCI bridge to [bus 08-09] [ 0.472513] pci 0000:07:00.0: bridge window [io disabled] [ 0.472649] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.472740] pci 0000:07:00.0: bridge window [mem pref disabled] [ 0.472924] pci 0000:07:01.0: PCI bridge to [bus 0a-0a] [ 0.472926] pci 0000:07:01.0: bridge window [io disabled] [ 0.473061] pci 0000:07:01.0: bridge window [mem disabled] [ 0.473153] pci 0000:07:01.0: bridge window [mem pref disabled] [ 0.473337] pci 0000:06:00.0: PCI bridge to [bus 07-0a] [ 0.473339] pci 0000:06:00.0: bridge window [io disabled] [ 0.473475] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.473566] pci 0000:06:00.0: bridge window [mem pref disabled] [ 0.473750] pci 0000:06:00.3: PCI bridge to [bus 0b-0b] [ 0.473752] pci 0000:06:00.3: bridge window [io disabled] [ 0.473887] pci 0000:06:00.3: bridge window [mem disabled] [ 0.473979] pci 0000:06:00.3: bridge window [mem pref disabled] [ 0.474163] pci 0000:00:02.0: PCI bridge to [bus 06-0b] [ 0.474165] pci 0000:00:02.0: bridge window [io disabled] [ 0.474169] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff] [ 0.474173] pci 0000:00:02.0: bridge window [mem pref disabled] [ 0.474178] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 0.474180] pci 0000:01:00.0: bridge window [io disabled] [ 0.474185] pci 0000:01:00.0: bridge window [mem 0xfc500000-0xfc6fffff] [ 0.474189] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 0.474196] pci 0000:01:00.2: PCI bridge to [bus 03-03] [ 0.474197] pci 0000:01:00.2: bridge window [io disabled] [ 0.474202] pci 0000:01:00.2: bridge window [mem disabled] [ 0.474206] pci 0000:01:00.2: bridge window [mem pref disabled] [ 0.474212] pci 0000:00:03.0: PCI bridge to [bus 01-03] [ 0.474214] pci 0000:00:03.0: bridge window [io disabled] [ 0.474218] pci 0000:00:03.0: bridge window [mem 0xfc400000-0xfc6fffff] [ 0.474222] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 0.474227] pci 0000:00:04.0: PCI bridge to [bus 0c-0c] [ 0.474229] pci 0000:00:04.0: bridge window [io disabled] [ 0.474233] pci 0000:00:04.0: bridge window [mem disabled] [ 0.474236] pci 0000:00:04.0: bridge window [mem pref disabled] [ 0.474241] pci 0000:00:05.0: PCI bridge to [bus 0d-0d] [ 0.474243] pci 0000:00:05.0: bridge window [io disabled] [ 0.474247] pci 0000:00:05.0: bridge window [mem disabled] [ 0.474251] pci 0000:00:05.0: bridge window [mem pref disabled] [ 0.474256] pci 0000:0e:00.0: PCI bridge to [bus 0f-0f] [ 0.474258] pci 0000:0e:00.0: bridge window [io disabled] [ 0.474263] pci 0000:0e:00.0: bridge window [mem disabled] [ 0.474266] pci 0000:0e:00.0: bridge window [mem pref disabled] [ 0.474272] pci 0000:0e:00.2: PCI bridge to [bus 10-10] [ 0.474274] pci 0000:0e:00.2: bridge window [io disabled] [ 0.474278] pci 0000:0e:00.2: bridge window [mem disabled] [ 0.474282] pci 0000:0e:00.2: bridge window [mem pref disabled] [ 0.474288] pci 0000:00:06.0: PCI bridge to [bus 0e-10] [ 0.474290] pci 0000:00:06.0: bridge window [io disabled] [ 0.474294] pci 0000:00:06.0: bridge window [mem 0xfc300000-0xfc3fffff] [ 0.474297] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.474302] pci 0000:00:07.0: PCI bridge to [bus 11-11] [ 0.474304] pci 0000:00:07.0: bridge window [io disabled] [ 0.474308] pci 0000:00:07.0: bridge window [mem disabled] [ 0.474312] pci 0000:00:07.0: bridge window [mem pref disabled] [ 0.474317] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 0.474319] pci 0000:04:00.0: bridge window [io disabled] [ 0.474325] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.474330] pci 0000:04:00.0: bridge window [mem pref disabled] [ 0.474337] pci 0000:00:1c.0: PCI bridge to [bus 04-05] [ 0.474339] pci 0000:00:1c.0: bridge window [io disabled] [ 0.474344] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.474348] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 0.474358] pci 0000:12:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref] [ 0.474362] pci 0000:00:1e.0: PCI bridge to [bus 12-12] [ 0.474365] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.474370] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff] [ 0.474374] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.474396] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.474401] pci 0000:00:02.0: setting latency timer to 64 [ 0.474486] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.474576] pci 0000:06:00.0: setting latency timer to 64 [ 0.474715] pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.474805] pci 0000:07:00.0: setting latency timer to 64 [ 0.475035] pci 0000:08:00.0: setting latency timer to 64 [ 0.475173] pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.475264] pci 0000:07:01.0: setting latency timer to 64 [ 0.475494] pci 0000:06:00.3: setting latency timer to 64 [ 0.475542] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.475546] pci 0000:00:03.0: setting latency timer to 64 [ 0.475553] pci 0000:01:00.0: setting latency timer to 64 [ 0.475560] pci 0000:01:00.2: setting latency timer to 64 [ 0.475565] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.475569] pci 0000:00:04.0: setting latency timer to 64 [ 0.475575] pci 0000:00:05.0: setting latency timer to 64 [ 0.475580] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.475584] pci 0000:00:06.0: setting latency timer to 64 [ 0.475591] pci 0000:0e:00.0: setting latency timer to 64 [ 0.475598] pci 0000:0e:00.2: setting latency timer to 64 [ 0.475604] pci 0000:00:07.0: setting latency timer to 64 [ 0.475610] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.475615] pci 0000:00:1c.0: setting latency timer to 64 [ 0.475623] pci 0000:04:00.0: setting latency timer to 64 [ 0.475630] pci 0000:00:1e.0: setting latency timer to 64 [ 0.475635] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.475637] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.475640] pci_bus 0000:06: resource 1 [mem 0xf2000000-0xf7ffffff] [ 0.475643] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.475646] pci_bus 0000:08: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.475648] pci_bus 0000:09: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.475651] pci_bus 0000:01: resource 1 [mem 0xfc400000-0xfc6fffff] [ 0.475654] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] [ 0.475657] pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc6fffff] [ 0.475660] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] [ 0.475663] pci_bus 0000:0e: resource 1 [mem 0xfc300000-0xfc3fffff] [ 0.475666] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.475668] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.475671] pci_bus 0000:12: resource 0 [io 0xe000-0xefff] [ 0.475674] pci_bus 0000:12: resource 1 [mem 0xfc100000-0xfc2fffff] [ 0.475676] pci_bus 0000:12: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.475679] pci_bus 0000:12: resource 4 [io 0x0000-0xffff] [ 0.475682] pci_bus 0000:12: resource 5 [mem 0x00000000-0xfffffffff] [ 0.475735] NET: Registered protocol family 2 [ 0.476074] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.477925] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.481982] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.482483] TCP: Hash tables configured (established 524288 bind 65536) [ 0.482486] TCP reno registered [ 0.482512] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.482593] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.482843] NET: Registered protocol family 1 [ 0.482985] pci 0000:00:1f.0: rerouting interrupts for [8086:2670] [ 0.483226] pci 0000:01:00.0: rerouting interrupts for [8086:0370] [ 0.483231] pci 0000:01:00.2: rerouting interrupts for [8086:0372] [ 0.483238] pci 0000:0e:00.0: rerouting interrupts for [8086:0329] [ 0.483243] pci 0000:0e:00.2: rerouting interrupts for [8086:032a] [ 0.483255] pci 0000:12:0d.0: Boot video device [ 0.483259] PCI: CLS 64 bytes, default 64 [ 0.483262] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.483265] Placing 64MB software IO TLB between ffff8800cbfa2000 - ffff8800cffa2000 [ 0.483268] software IO TLB at phys 0xcbfa2000 - 0xcffa2000 [ 0.483742] audit: initializing netlink socket (disabled) [ 0.483754] type=2000 audit(1318524476.476:1): initialized [ 0.540403] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.607555] VFS: Disk quotas dquot_6.5.2 [ 0.607632] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.608388] fuse init (API version 7.16) [ 0.608488] msgmni has been set to 15965 [ 0.609034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.609087] io scheduler noop registered [ 0.609089] io scheduler deadline registered (default) [ 0.609130] io scheduler cfq registered [ 0.609451] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.609511] pcieport 0000:00:1c.0: irq 264 for MSI/MSI-X [ 0.613673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.613699] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.613754] intel_idle: MWAIT substates: 0x20 [ 0.613756] intel_idle: does not run on family 6 model 15 [ 0.613841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.613848] ACPI: Power Button [PWRF] [ 0.613881] ACPI: acpi_idle registered with cpuidle [ 0.616902] ERST: Table is not found! [ 0.616982] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.637370] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.700352] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.711438] Freeing initrd memory: 13876k freed [ 0.872523] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.892963] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.893251] Linux agpgart interface v0.103 [ 0.894510] brd: module loaded [ 0.895097] loop: module loaded [ 0.895271] ata_piix 0000:00:1f.1: version 2.13 [ 0.895284] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.895324] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.895673] scsi0 : ata_piix [ 0.895772] scsi1 : ata_piix [ 0.895814] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.895817] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.895998] ata2: port disabled. ignoring. [ 0.896175] Fixed MDIO Bus: probed [ 0.896199] PPP generic driver version 2.4.2 [ 0.896242] tun: Universal TUN/TAP device driver, 1.6 [ 0.896244] tun: (C) 1999-2004 Max Krasnyansky [ 0.896340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.896368] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.896391] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.896395] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.896438] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.896475] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.900353] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.900369] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc700400 [ 0.916012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.916133] hub 1-0:1.0: USB hub found [ 0.916139] hub 1-0:1.0: 6 ports detected [ 0.916224] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.916240] uhci_hcd: USB Universal Host Controller Interface driver [ 0.916260] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.916266] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.916269] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.916306] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.916330] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0 [ 0.916452] hub 2-0:1.0: USB hub found [ 0.916457] hub 2-0:1.0: 2 ports detected [ 0.916531] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.916537] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.916540] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.916577] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.916608] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0 [ 0.916727] hub 3-0:1.0: USB hub found [ 0.916731] hub 3-0:1.0: 2 ports detected [ 0.916801] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.916808] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.916811] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.916844] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.916867] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0 [ 0.916989] hub 4-0:1.0: USB hub found [ 0.916994] hub 4-0:1.0: 2 ports detected [ 0.917103] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.919759] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.919772] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.919945] mousedev: PS/2 mouse device common for all mice [ 0.920056] rtc_cmos 00:04: RTC can wake from S4 [ 0.920170] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.920195] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.920337] device-mapper: uevent: version 1.0.3 [ 0.920413] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 0.920423] cpuidle: using governor ladder [ 0.920426] cpuidle: using governor menu [ 0.920428] EFI Variables Facility v0.08 2004-May-17 [ 0.920732] TCP cubic registered [ 0.920866] NET: Registered protocol family 10 [ 0.921433] NET: Registered protocol family 17 [ 0.921456] Registering the dns_resolver key type [ 0.921561] PM: Hibernation image not present or could not be loaded. [ 0.921582] registered taskstats version 1 [ 0.963685] Magic number: 15:932:792 [ 0.963807] rtc_cmos 00:04: setting system clock to 2011-10-13 16:47:57 UTC (1318524477) [ 0.963842] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.963844] EDD information not available. [ 1.056302] ata1.00: ATAPI: TEAC DVD-ROM DV28EV, D.AE, max UDMA/33 [ 1.072179] ata1.00: configured for UDMA/33 [ 1.080996] scsi 0:0:0:0: CD-ROM TEAC DVD-ROM DV28EV D.AE PQ: 0 ANSI: 5 [ 1.088856] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 1.088859] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.088983] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.089053] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.090934] Freeing unused kernel memory: 904k freed [ 1.091286] Write protecting the kernel read-only data: 12288k [ 1.099012] Freeing unused kernel memory: 1988k freed [ 1.105028] Freeing unused kernel memory: 1372k freed [ 1.126183] udevd[92]: starting version 173 [ 1.160598] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011 [ 1.160640] megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 [ 1.160673] megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 1.163146] megasas: FW now in Ready state [ 1.171369] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.6 (Mar 7, 2011) [ 1.171449] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.212081] megasas_init_mfi: fw_support_ieee=0 [ 1.212085] megasas: INIT adapter done [ 1.232030] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 1.284044] scsi2 : LSI SAS based MegaRAID driver [ 1.284049] megaraid_sas: fw state:c0000000 [ 1.284052] megasas: fwstate:c0000000, dis_OCR=0 [ 1.285158] scsi 2:0:0:0: Direct-Access SEAGATE ST373455SS S515 PQ: 0 ANSI: 5 [ 1.286115] scsi 2:0:1:0: Direct-Access SEAGATE ST373455SS S515 PQ: 0 ANSI: 5 [ 1.287042] scsi 2:0:2:0: Direct-Access SEAGATE ST373455SS S515 PQ: 0 ANSI: 5 [ 1.287952] scsi 2:0:3:0: Direct-Access SEAGATE ST373455SS S515 PQ: 0 ANSI: 5 [ 1.288859] scsi 2:0:4:0: Direct-Access SEAGATE ST373455SS S515 PQ: 0 ANSI: 5 [ 1.364612] hub 1-1:1.0: USB hub found [ 1.364669] hub 1-1:1.0: 2 ports detected [ 1.387694] scsi 2:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5 [ 1.406632] scsi 2:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5 [ 1.420895] scsi 2:0:8:0: Attached scsi generic sg1 type 13 [ 1.421087] sd 2:2:0:0: Attached scsi generic sg2 type 0 [ 1.421107] sd 2:2:0:0: [sda] 568328192 512-byte logical blocks: (290 GB/271 GiB) [ 1.421242] sd 2:2:0:0: [sda] Write Protect is off [ 1.421246] sd 2:2:0:0: [sda] Mode Sense: 1f 00 10 08 [ 1.421329] sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 1.421964] sda: sda1 sda2 < sda5 > [ 1.422510] sd 2:2:0:0: [sda] Attached SCSI disk [ 1.504022] Refined TSC clocksource calibration: 1994.999 MHz. [ 1.504028] Switching to clocksource tsc [ 1.532019] usb 1-5: new high speed USB device number 4 using ehci_hcd [ 1.558897] ses 2:0:8:0: Attached Enclosure device [ 1.656827] bnx2 0000:09:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:1c:23:c0:9a:cb [ 1.656869] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.664712] hub 1-5:1.0: USB hub found [ 1.664803] hub 1-5:1.0: 4 ports detected [ 1.741808] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.904017] usb 3-1: new low speed USB device number 2 using uhci_hcd [ 2.184182] usb 1-1.1: new full speed USB device number 5 using ehci_hcd [ 2.348181] usb 1-1.2: new high speed USB device number 6 using ehci_hcd [ 4.192024] floppy0: no floppy controllers found [ 62.944049] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.1.fw" [ 62.944081] bnx2 0000:05:00.0: PCI INT A disabled [ 62.944095] bnx2: probe of 0000:05:00.0 failed with error -2 [ 66.211665] lp: driver loaded but no devices found [ 66.327033] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 66.354482] EDAC MC: Ver: 2.1.0 [ 66.359130] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 66.359153] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 66.373646] intel_rng: FWH not detected [ 66.384597] usbcore: registered new interface driver uas [ 66.385761] [drm] Initialized drm 1.1.0 20060810 [ 66.386030] Initializing USB Mass Storage driver... [ 66.386099] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1 [ 66.386218] generic-usb 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1/input0 [ 66.387967] scsi3 : usb-storage 1-1.2:1.0 [ 66.397824] scsi4 : usb-storage 1-1.2:1.1 [ 66.399184] usbcore: registered new interface driver usb-storage [ 66.399186] USB Mass Storage support registered. [ 66.401834] bnx2 0000:09:00.0: irq 265 for MSI/MSI-X [ 66.403760] [drm] radeon defaulting to kernel modesetting. [ 66.403764] [drm] radeon kernel modesetting enabled. [ 66.403877] radeon 0000:12:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 66.404137] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2). [ 66.404169] [drm] register mmio base: 0xFC1F0000 [ 66.404171] [drm] register mmio size: 65536 [ 66.404322] radeon 0000:12:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) [ 66.404327] radeon 0000:12:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [ 66.404335] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 66.404337] [drm] Driver supports precise vblank timestamp query. [ 66.404358] [drm] radeon: irq initialized. [ 66.406235] [drm] Detected VRAM RAM=128M, BAR=128M [ 66.406240] [drm] RAM width 16bits DDR [ 66.406606] [TTM] Zone kernel: Available graphics memory: 4096332 kiB. [ 66.406609] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 66.406611] [TTM] Initializing pool allocator. [ 66.406647] [drm] radeon: 16M of VRAM memory ready [ 66.406650] [drm] radeon: 512M of GTT memory ready. [ 66.406695] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 66.409223] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input2 [ 66.409367] generic-usb 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1/input1 [ 66.411544] input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 [ 66.411664] generic-usb 0003:413C:0000.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0 [ 66.413541] input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input4 [ 66.413674] generic-usb 0003:413C:0000.0004: input,hidraw3: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1 [ 66.413701] usbcore: registered new interface driver usbhid [ 66.413703] usbhid: USB HID core driver [ 66.428657] radeon 0000:12:0d.0: WB enabled [ 66.428734] [drm] Loading R100 Microcode [ 66.441519] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 66.481012] [drm] radeon: ring at 0x00000000B0001000 [ 66.481048] [drm] ring test succeeded in 3 usecs [ 66.481189] [drm] radeon: ib pool ready. [ 66.481592] [drm] ib test succeeded in 0 usecs [ 66.481808] [drm] Radeon Display Connectors [ 66.481810] [drm] Connector 0: [ 66.481811] [drm] VGA [ 66.481814] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 66.481816] [drm] Encoders: [ 66.481818] [drm] CRT1: INTERNAL_DAC1 [ 66.520077] bnx2 0000:09:00.0: eth0: using MSI [ 66.521234] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.586101] [drm] Radeon display connector VGA-1: Found valid EDID [ 66.651782] [drm] fb mappable at 0xD0040000 [ 66.651784] [drm] vram apper at 0xD0000000 [ 66.651786] [drm] size 786432 [ 66.651788] [drm] fb depth is 8 [ 66.651789] [drm] pitch is 1024 [ 66.651897] fbcon: radeondrmfb (fb0) is primary device [ 66.809832] Console: switching to colour frame buffer device 128x48 [ 66.817329] fb0: radeondrmfb frame buffer device [ 66.817331] drm: registered panic notifier [ 66.817339] [drm] Initialized radeon 2.10.0 20080528 for 0000:12:0d.0 on minor 0 [ 67.388863] scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS [ 67.390840] sr1: scsi-1 drive [ 67.390993] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 67.391087] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 67.396726] scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS [ 67.397225] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 67.398716] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 69.384024] floppy0: no floppy controllers found [ 72.172193] bnx2 0000:09:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 72.173289] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 82.216007] eth0: no IPv6 routers present [ 82.563969] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro