[   12.744305] usb 1-1.1.2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[   12.757835] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[   12.759587] EXT4-fs (sda1): re-mounted. Opts: commit=0
[   13.004250] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[   15.040353] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[   15.043340] EXT4-fs (sda1): re-mounted. Opts: commit=0
[   15.045259] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[   21.009916] eth1: no IPv6 routers present
[  284.063779] usb 1-1.1.1: new high speed USB device using ehci_hcd and address 8
[  284.261021] IR NEC protocol handler initialized
[  284.286345] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[  284.286512] em28xx #0: chip ID is em2882/em2883
[  284.294830] IR RC5(x) protocol handler initialized
[  284.307078] IR RC6 protocol handler initialized
[  284.314742] IR JVC protocol handler initialized
[  284.317451] IR Sony protocol handler initialized
[  284.322114] lirc_dev: IR Remote Control driver registered, major 250 
[  284.324505] IR LIRC bridge handler initialized
[  284.502054] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[  284.502069] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[  284.502082] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[  284.502095] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[  284.502108] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  284.502120] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  284.502132] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[  284.502145] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[  284.502157] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[  284.502170] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[  284.502182] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 38 00 30 00 33 00 30 00
[  284.502194] em28xx #0: i2c eeprom b0: 31 00 32 00 38 00 30 00 35 00 33 00 32 00 00 00
[  284.502207] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  284.502219] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  284.502232] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  284.502244] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  284.502258] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc5b3acbf
[  284.502261] em28xx #0: EEPROM info:
[  284.502263] em28xx #0:	AC97 audio (5 sample rates)
[  284.502265] em28xx #0:	500mA max power
[  284.502269] em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[  284.503413] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[  284.503416] em28xx #0: 
[  284.503417] 
[  284.503420] em28xx #0: The support for this board weren't valid yet.
[  284.503423] em28xx #0: Please send a report of having this working
[  284.503426] em28xx #0: not to V4L mailing list (and/or to other addresses)
[  284.503427] 
[  284.510697] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[  284.519454] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[  284.523390] xc2028 5-0061: creating new instance
[  284.523395] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[  284.568837] xc2028 5-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[  284.624869] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[  285.533271] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[  285.548135] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[  285.674954] em28xx #0: Config register raw data: 0xd0
[  285.675804] em28xx #0: AC97 vendor ID = 0xffffffff
[  285.676178] em28xx #0: AC97 features = 0x6a90
[  285.676181] em28xx #0: Empia 202 AC97 audio processor detected
[  285.834201] tvp5150 5-005c: tvp5150am1 detected.
[  285.934458] em28xx #0: v4l2 driver version 0.1.2
[  286.040966] em28xx #0: V4L2 video device registered as video1
[  286.040971] em28xx #0: V4L2 VBI device registered as vbi0
[  286.041627] usbcore: registered new interface driver em28xx
[  286.041632] em28xx driver loaded
[  286.057438] em28xx-audio.c: probing for em28x1 non standard usbaudio
[  286.057442] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[  286.057616] Em28xx: Initialized (Em28xx Audio Extension) extension
[  286.175478] tvp5150 5-005c: tvp5150am1 detected.
[  452.371942] tvp5150 5-005c: tvp5150am1 detected.
[  452.672762] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[  453.621435] MTS (4), id 00000000000000ff:
[  453.621443] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[  485.375674] lo: Disabled Privacy Extensions
[ 1950.578128] tvp5150 5-005c: tvp5150am1 detected.
[ 1950.907560] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 1951.847472] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 1951.863596] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 1992.272416] tvp5150 5-005c: tvp5150am1 detected.
[ 1992.601890] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 1993.572061] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 1993.586828] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2008.405359] tvp5150 5-005c: tvp5150am1 detected.
[ 2008.735045] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2009.695137] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2009.709984] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2053.205615] tvp5150 5-005c: tvp5150am1 detected.
[ 2053.567457] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2054.504241] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2054.518614] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2192.734414] tvp5150 5-005c: tvp5150am1 detected.
[ 2193.053835] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2194.015279] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2194.030618] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2210.406642] tvp5150 5-005c: tvp5150am1 detected.
[ 2210.727119] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2211.687558] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2211.702630] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2282.136632] tvp5150 5-005c: tvp5150am1 detected.
[ 2282.444769] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2283.416108] MTS (4), id 00000000000000ff:
[ 2283.416116] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2357.813384] tvp5150 5-005c: tvp5150am1 detected.
[ 2358.112971] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2359.063647] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2359.078351] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2385.937633] tvp5150 5-005c: tvp5150am1 detected.
[ 2386.275832] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2387.235971] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2387.250607] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2432.521030] tvp5150 5-005c: tvp5150am1 detected.
[ 2432.840435] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2433.780669] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2433.795280] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2443.712104] tvp5150 5-005c: tvp5150am1 detected.
[ 2444.031552] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2444.971501] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2444.986110] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2467.754230] tvp5150 5-005c: tvp5150am1 detected.
[ 2468.073821] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2469.025109] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2469.040360] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2487.586332] tvp5150 5-005c: tvp5150am1 detected.
[ 2487.905679] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2488.855536] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2488.877032] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2501.748079] tvp5150 5-005c: tvp5150am1 detected.
[ 2502.067496] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2503.029053] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2503.043916] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2525.251710] tvp5150 5-005c: tvp5150am1 detected.
[ 2525.551347] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2526.512584] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2526.527205] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2597.602533] tvp5150 5-005c: tvp5150am1 detected.
[ 2597.932131] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2598.882420] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2598.897291] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2614.746345] tvp5150 5-005c: tvp5150am1 detected.
[ 2615.065768] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2616.025875] MTS (4), id 00000000000000ff:
[ 2616.025883] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2621.005973] tvp5150 5-005c: tvp5150am1 detected.
[ 2621.306611] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2622.266162] MTS (4), id 00000000000000ff:
[ 2622.266169] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2641.339812] tvp5150 5-005c: tvp5150am1 detected.
[ 2641.639365] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2642.598322] MTS (4), id 00000000000000ff:
[ 2642.598330] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2648.580920] tvp5150 5-005c: tvp5150am1 detected.
[ 2648.879838] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2649.829253] MTS (4), id 00000000000000ff:
[ 2649.829262] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2677.944534] tvp5150 5-005c: tvp5150am1 detected.
[ 2678.262827] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2679.234008] MTS (4), id 00000000000000ff:
[ 2679.234016] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2682.583965] tvp5150 5-005c: tvp5150am1 detected.
[ 2682.883393] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2683.854322] MTS (4), id 00000000000000ff:
[ 2683.854332] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2822.901432] tvp5150 5-005c: tvp5150am1 detected.
[ 2823.219714] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2824.169788] MTS (4), id 00000000000000ff:
[ 2824.169798] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2829.021035] tvp5150 5-005c: tvp5150am1 detected.
[ 2829.320385] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2830.281497] MTS (4), id 00000000000000ff:
[ 2830.281505] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2833.732760] tvp5150 5-005c: tvp5150am1 detected.
[ 2834.040876] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2834.991083] MTS (4), id 00000000000000ff:
[ 2834.991093] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 2979.379653] usbcore: deregistering interface driver snd-usb-audio
[ 2992.861036] tvp5150 5-005c: tvp5150am1 detected.
[ 2993.199127] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 2994.149257] MTS (4), id 00000000000000ff:
[ 2994.149266] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 7518.727557] tvp5150 5-005c: tvp5150am1 detected.
[ 7519.026971] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7519.987472] MTS (4), id 00000000000000ff:
[ 7519.987482] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 7558.346942] xc2028 5-0061: Loading firmware for type=MTS (4), id 00000003000000e0.
[ 7560.107365] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000000010.
[ 7562.047391] MTS (4), id 00000000000000ff:
[ 7562.047399] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 7594.434100] tvp5150 5-005c: tvp5150am1 detected.
[ 7594.743714] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7595.705086] MTS (4), id 00000000007f0000:
[ 7595.705094] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[ 7604.745207] tvp5150 5-005c: tvp5150am1 detected.
[ 7605.066045] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 7606.023471] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 7606.038332] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 7614.637581] tvp5150 5-005c: tvp5150am1 detected.
[ 7614.957087] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 7615.926961] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 7615.942049] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 7625.068846] tvp5150 5-005c: tvp5150am1 detected.
[ 7625.386962] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 7626.347230] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 7626.361940] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 7634.178456] tvp5150 5-005c: tvp5150am1 detected.
[ 7634.518651] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7635.618101] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7636.919406] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7638.008312] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7645.309541] tvp5150 5-005c: tvp5150am1 detected.
[ 7645.639080] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 7646.599199] MTS (4), id 00000000000000ff:
[ 7646.599209] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9152.468726] tvp5150 5-005c: tvp5150am1 detected.
[ 9152.777072] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9153.747225] MTS (4), id 00000000000000ff:
[ 9153.747235] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9480.195468] tvp5150 5-005c: tvp5150am1 detected.
[ 9480.505018] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9481.455971] MTS (4), id 00000000000000ff:
[ 9481.455979] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9705.081330] tvp5150 5-005c: tvp5150am1 detected.
[ 9705.380227] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9706.341419] MTS (4), id 00000000000000ff:
[ 9706.341427] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9770.927993] tvp5150 5-005c: tvp5150am1 detected.
[ 9771.227393] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9772.198630] MTS (4), id 00000000000000ff:
[ 9772.198639] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9810.364221] tvp5150 5-005c: tvp5150am1 detected.
[ 9810.691745] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9811.642962] MTS (4), id 00000000000000ff:
[ 9811.642971] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10046.825169] usb 1-1.1.1: USB disconnect, address 8
[10046.825246] em28xx #0: disconnecting em28xx #0 video
[10046.825251] em28xx #0: V4L2 device vbi0 deregistered
[10046.825336] em28xx #0: V4L2 device video1 deregistered
[10046.825464] xc2028 5-0061: destroying instance
[10064.719589] usb 2-1.3: new high speed USB device using ehci_hcd and address 3
[10064.838410] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[10064.838532] em28xx #0: chip ID is em2882/em2883
[10065.047476] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[10065.047491] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[10065.047504] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[10065.047517] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[10065.047530] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10065.047542] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10065.047554] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[10065.047567] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[10065.047579] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[10065.047591] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[10065.047604] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 38 00 30 00 33 00 30 00
[10065.047616] em28xx #0: i2c eeprom b0: 31 00 32 00 38 00 30 00 35 00 33 00 32 00 00 00
[10065.047629] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10065.047641] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10065.047653] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10065.047666] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10065.047680] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc5b3acbf
[10065.047682] em28xx #0: EEPROM info:
[10065.047684] em28xx #0:	AC97 audio (5 sample rates)
[10065.047687] em28xx #0:	500mA max power
[10065.047690] em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[10065.048843] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[10065.048847] em28xx #0: 
[10065.048848] 
[10065.048851] em28xx #0: The support for this board weren't valid yet.
[10065.048853] em28xx #0: Please send a report of having this working
[10065.048856] em28xx #0: not to V4L mailing list (and/or to other addresses)
[10065.048858] 
[10065.103813] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[10065.107886] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[10065.108046] xc2028 5-0061: creating new instance
[10065.108050] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[10065.124736] xc2028 5-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[10065.181346] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[10066.129573] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[10066.144550] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[10066.271614] em28xx #0: Config register raw data: 0xd0
[10066.272311] em28xx #0: AC97 vendor ID = 0xffffffff
[10066.272687] em28xx #0: AC97 features = 0x6a90
[10066.272690] em28xx #0: Empia 202 AC97 audio processor detected
[10066.430238] tvp5150 5-005c: tvp5150am1 detected.
[10066.532346] em28xx #0: v4l2 driver version 0.1.2
[10066.636958] em28xx #0: V4L2 video device registered as video1
[10066.636962] em28xx #0: V4L2 VBI device registered as vbi0
[10066.636966] em28xx-audio.c: probing for em28x1 non standard usbaudio
[10066.636968] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[10066.771999] tvp5150 5-005c: tvp5150am1 detected.
[10071.441321] tvp5150 5-005c: tvp5150am1 detected.
[10071.740250] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10072.704709] MTS (4), id 00000000000000ff:
[10072.704719] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10213.406086] tvp5150 5-005c: tvp5150am1 detected.
[10213.705445] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10214.655803] MTS (4), id 00000000000000ff:
[10214.655812] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10253.730314] tvp5150 5-005c: tvp5150am1 detected.
[10254.060706] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10255.019757] MTS (4), id 00000000000000ff:
[10255.019766] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10260.971114] tvp5150 5-005c: tvp5150am1 detected.
[10261.271773] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10262.241736] MTS (4), id 00000000000000ff:
[10262.241744] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10499.127108] tvp5150 5-005c: tvp5150am1 detected.
[10499.426000] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10500.367839] MTS (4), id 00000000007f0000:
[10500.367849] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[10501.323939] MTS (4), id 00000000000000ff:
[10501.323948] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10807.610779] tvp5150 5-005c: tvp5150am1 detected.
[10807.910107] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10808.879966] MTS (4), id 00000000000000ff:
[10808.879976] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[10875.107934] tvp5150 5-005c: tvp5150am1 detected.
[10875.438772] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[10876.407593] MTS (4), id 00000000007f0000:
[10876.407603] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[10877.074856] MTS (4), id 00000000000000ff:
[10877.074865] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[11044.040564] usb 2-1.3: USB disconnect, address 3
[11044.040642] em28xx #0: disconnecting em28xx #0 video
[11044.040647] em28xx #0: V4L2 device vbi0 deregistered
[11044.040733] em28xx #0: V4L2 device video1 deregistered
[11044.040865] xc2028 5-0061: destroying instance
[11045.817172] usb 2-1.3: new high speed USB device using ehci_hcd and address 4
[11045.935042] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[11045.935231] em28xx #0: chip ID is em2882/em2883
[11046.133529] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[11046.133544] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[11046.133557] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[11046.133570] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[11046.133583] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[11046.133595] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[11046.133607] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[11046.133620] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[11046.133632] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[11046.133645] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[11046.133657] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 38 00 30 00 33 00 30 00
[11046.133670] em28xx #0: i2c eeprom b0: 31 00 32 00 38 00 30 00 35 00 33 00 32 00 00 00
[11046.133682] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[11046.133694] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[11046.133707] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[11046.133719] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[11046.133733] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc5b3acbf
[11046.133736] em28xx #0: EEPROM info:
[11046.133738] em28xx #0:	AC97 audio (5 sample rates)
[11046.133740] em28xx #0:	500mA max power
[11046.133744] em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[11046.134889] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[11046.134893] em28xx #0: 
[11046.134894] 
[11046.134897] em28xx #0: The support for this board weren't valid yet.
[11046.134900] em28xx #0: Please send a report of having this working
[11046.134902] em28xx #0: not to V4L mailing list (and/or to other addresses)
[11046.134904] 
[11046.137280] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[11046.141805] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[11046.142055] xc2028 5-0061: creating new instance
[11046.142061] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[11046.144304] xc2028 5-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[11046.198229] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[11047.146487] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[11047.161346] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[11047.297284] em28xx #0: Config register raw data: 0xd0
[11047.298131] em28xx #0: AC97 vendor ID = 0xffffffff
[11047.298525] em28xx #0: AC97 features = 0x6a90
[11047.298528] em28xx #0: Empia 202 AC97 audio processor detected
[11047.459042] tvp5150 5-005c: tvp5150am1 detected.
[11047.557760] em28xx #0: v4l2 driver version 0.1.2
[11047.664560] em28xx #0: V4L2 video device registered as video1
[11047.664565] em28xx #0: V4L2 VBI device registered as vbi0
[11047.664570] em28xx-audio.c: probing for em28x1 non standard usbaudio
[11047.664574] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[11047.807784] tvp5150 5-005c: tvp5150am1 detected.
[11053.367576] tvp5150 5-005c: tvp5150am1 detected.
[11053.667282] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[11054.617862] MTS (4), id 00000000007f0000:
[11054.617870] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[11055.566430] MTS (4), id 00000000000000ff:
[11055.566439] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[11305.115697] tvp5150 5-005c: tvp5150am1 detected.
[11305.425138] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[11306.385293] MTS (4), id 00000000007f0000:
[11306.385303] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[11307.333119] MTS (4), id 00000000000000ff:
[11307.333127] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[11311.108113] tvp5150 5-005c: tvp5150am1 detected.
[11311.406415] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[11312.377774] MTS (4), id 00000000007f0000:
[11312.377783] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[11357.139151] tvp5150 5-005c: tvp5150am1 detected.
[11357.442095] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[11358.410877] MTS (4), id 00000000007f0000:
[11358.410886] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[11364.278807] MTS (4), id 00000000000000ff:
[11364.278817] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[13510.037867] tvp5150 5-005c: tvp5150am1 detected.
[13510.337491] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[13511.299343] MTS (4), id 00000000007f0000:
[13511.299352] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[13512.276824] MTS (4), id 00000000000000ff:
[13512.276834] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[13665.195134] tvp5150 5-005c: tvp5150am1 detected.
[13665.494722] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[13666.456512] MTS (4), id 00000000007f0000:
[13666.456521] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[13667.414082] MTS (4), id 00000000000000ff:
[13667.414090] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[13677.115292] xc2028 5-0061: Loading firmware for type=MTS (4), id 00000003000000e0.
[13678.774060] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000000010.
[13679.623662] MTS (4), id 00000000000000ff:
[13679.623671] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[14000.092241] tvp5150 5-005c: tvp5150am1 detected.
[14000.393465] xc2028 5-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[14001.352199] MTS (4), id 00000000007f0000:
[14001.352209] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[14002.289544] MTS (4), id 00000000000000ff:
[14002.289554] xc2028 5-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[14175.226170] usb 2-1.3: USB disconnect, address 4
[14175.226250] em28xx #0: disconnecting em28xx #0 video
[14175.226255] em28xx #0: V4L2 device vbi0 deregistered
[14175.226343] em28xx #0: V4L2 device video1 deregistered
[14175.226469] xc2028 5-0061: destroying instance
[14178.021736] usb 2-1.3: new high speed USB device using ehci_hcd and address 5
[14178.140491] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[14178.140559] em28xx #0: chip ID is em2882/em2883
[14178.340973] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[14178.340988] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[14178.341001] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[14178.341014] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[14178.341027] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14178.341039] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14178.341051] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[14178.341064] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[14178.341076] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[14178.341089] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[14178.341101] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 38 00 30 00 33 00 30 00
[14178.341114] em28xx #0: i2c eeprom b0: 31 00 32 00 38 00 30 00 35 00 33 00 32 00 00 00
[14178.341126] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14178.341138] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14178.341150] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14178.341163] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[14178.341177] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc5b3acbf
[14178.341180] em28xx #0: EEPROM info:
[14178.341182] em28xx #0:	AC97 audio (5 sample rates)
[14178.341184] em28xx #0:	500mA max power
[14178.341187] em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[14178.342741] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[14178.342747] em28xx #0: 
[14178.342749] 
[14178.342753] em28xx #0: The support for this board weren't valid yet.
[14178.342758] em28xx #0: Please send a report of having this working
[14178.342762] em28xx #0: not to V4L mailing list (and/or to other addresses)
[14178.342765] 
[14178.351818] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[14178.355903] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[14178.356061] xc2028 5-0061: creating new instance
[14178.356064] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[14178.369331] xc2028 5-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[14178.422881] xc2028 5-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[14179.361583] xc2028 5-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[14179.376070] xc2028 5-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[14179.501846] em28xx #0: Config register raw data: 0xd0
[14179.502579] em28xx #0: AC97 vendor ID = 0xffffffff
[14179.502966] em28xx #0: AC97 features = 0x6a90
[14179.502971] em28xx #0: Empia 202 AC97 audio processor detected
[14179.661627] tvp5150 5-005c: tvp5150am1 detected.
[14179.762647] em28xx #0: v4l2 driver version 0.1.2
[14179.868500] em28xx #0: V4L2 video device registered as video1
[14179.868505] em28xx #0: V4L2 VBI device registered as vbi0
[14179.868508] em28xx-audio.c: probing for em28x1 non standard usbaudio
[14179.868511] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[14180.003503] tvp5150 5-005c: tvp5150am1 detected.
[14304.005110] lo: Disabled Privacy Extensions