[   12.345437] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[   12.345963] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[   12.345968] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
[   12.346025] HDA Intel 0000:00:08.0: setting latency timer to 64
[   13.930016] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[   14.310111] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input13
[   15.261017] r8169: eth0: link down
[   15.261513] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.489597] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.132245] usplash:352 freeing invalid memtype fffffffff9000000-fffffffff9e00000
[   19.507234] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   19.507239] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
[   19.507240] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   19.507241] vboxdrv: the usage of hardware performance counters by
[   19.507242] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   19.507246] vboxdrv: Found 2 processor cores.
[   19.507332] VBoxDrv: dbg - g_abExecMemory=ffffffffa0c86420
[   19.507353] vboxdrv: fAsync=0 offMin=0x1e7 offMax=0x1af4
[   19.507404] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   19.507406] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000).
[   19.512388] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0e23ac0
[   19.519045] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0e3e1c0
[   20.880501] ppdev: user-space parallel port driver
[   23.370549] CPU0 attaching NULL sched-domain.
[   23.370554] CPU1 attaching NULL sched-domain.
[   23.430054] CPU0 attaching sched-domain:
[   23.430058]  domain 0: span 0-1 level MC
[   23.430060]   groups: 0 1
[   23.430065] CPU1 attaching sched-domain:
[   23.430067]  domain 0: span 0-1 level MC
[   23.430069]   groups: 1 0
[   30.683159] CPU0 attaching NULL sched-domain.
[   30.683165] CPU1 attaching NULL sched-domain.
[   30.720084] CPU0 attaching sched-domain:
[   30.720088]  domain 0: span 0-1 level MC
[   30.720091]   groups: 0 1
[   30.720096] CPU1 attaching sched-domain:
[   30.720098]  domain 0: span 0-1 level MC
[   30.720100]   groups: 1 0
[   65.936735] wlan0: authenticate with AP 00:1e:e5:94:7c:ac
[   65.938636] wlan0: authenticated
[   65.938639] wlan0: associate with AP 00:1e:e5:94:7c:ac
[   65.941187] wlan0: RX AssocResp from 00:1e:e5:94:7c:ac (capab=0x471 status=0 aid=2)
[   65.941190] wlan0: associated
[   65.941811] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   76.821261] wlan0: no IPv6 routers present
[   88.041316] wlan0: no probe response from AP 00:1e:e5:94:7c:ac - disassociating
[   89.461582] wlan0: authenticate with AP 00:1e:e5:94:7c:ac
[   89.470061] wlan0: authenticated
[   89.470067] wlan0: associate with AP 00:1e:e5:94:7c:ac
[   89.473379] wlan0: RX ReassocResp from 00:1e:e5:94:7c:ac (capab=0x471 status=0 aid=2)
[   89.473383] wlan0: associated
[  104.492013] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 5502.040039] wlan0: no probe response from AP 00:1e:e5:94:7c:ac - disassociating
[ 5503.461898] wlan0: authenticate with AP 00:1e:e5:94:7c:ac
[ 5503.463725] wlan0: authenticated
[ 5503.463732] wlan0: associate with AP 00:1e:e5:94:7c:ac
[ 5503.465903] wlan0: RX ReassocResp from 00:1e:e5:94:7c:ac (capab=0x471 status=0 aid=2)
[ 5503.465910] wlan0: associated
[ 7482.040049] wlan0: no probe response from AP 00:1e:e5:94:7c:ac - disassociating
[ 7483.433468] wlan0: direct probe to AP 00:1e:e5:94:7c:ac try 1
[ 7483.435143] wlan0 direct probe responded
[ 7483.435150] wlan0: authenticate with AP 00:1e:e5:94:7c:ac
[ 7483.437567] wlan0: authenticated
[ 7483.437574] wlan0: associate with AP 00:1e:e5:94:7c:ac
[ 7483.440843] wlan0: RX ReassocResp from 00:1e:e5:94:7c:ac (capab=0x471 status=0 aid=2)
[ 7483.440846] wlan0: associated
[ 8197.989023] hub 1-4:1.0: port 2 disabled by hub (EMI?), re-enabling...
[ 8197.989395] usb 1-4.2: USB disconnect, address 6
[ 8198.380544] usb 1-4.2: new low speed USB device using ehci_hcd and address 7
[ 8198.509850] usb 1-4.2: configuration #1 chosen from 1 choice
[ 8198.520303] input:   USB Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input14
[ 8198.520494] generic-usb 0003:1241:1503.0004: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:04.1-4.2/input0
[ 8198.547969] input:   USB Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4.2/1-4.2:1.1/input/input15
[ 8198.548048] generic-usb 0003:1241:1503.0005: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:04.1-4.2/input1
[ 8200.150062] usb 1-2: new high speed USB device using ehci_hcd and address 8
[ 8200.305000] usb 1-2: configuration #1 chosen from 1 choice
[ 8200.315823] Afatech DVB-T: Fixing fullspeed to highspeed interval: 16 -> 8
[ 8200.316283] input: Afatech DVB-T as /devices/pci0000:00/0000:00:04.1/usb1/1-2/1-2:1.1/input/input16
[ 8200.316468] generic-usb 0003:15A4:9016.0006: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T] on usb-0000:00:04.1-2/input1
[ 8200.492635] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
[ 8200.492643] usb 1-2: firmware: requesting dvb-usb-af9015.fw
[ 8200.515285] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 8200.515297] dvb_usb_af9015: probe of 1-2:1.0 failed with error -2
[ 8200.515320] usbcore: registered new interface driver dvb_usb_af9015
[ 8243.192426] usb 1-2: USB disconnect, address 8
[ 8272.370131] usb 1-2: new high speed USB device using ehci_hcd and address 9
[ 8272.528861] usb 1-2: configuration #1 chosen from 1 choice
[ 8272.551135] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
[ 8272.551144] usb 1-2: firmware: requesting dvb-usb-af9015.fw
[ 8272.554112] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 8272.554130] dvb_usb_af9015: probe of 1-2:1.0 failed with error -2
[ 8272.558601] Afatech DVB-T: Fixing fullspeed to highspeed interval: 16 -> 8
[ 8272.559680] input: Afatech DVB-T as /devices/pci0000:00/0000:00:04.1/usb1/1-2/1-2:1.1/input/input17
[ 8272.559762] generic-usb 0003:15A4:9016.0007: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T] on usb-0000:00:04.1-2/input1
[ 8318.000053] wlan0: no probe response from AP 00:1e:e5:94:7c:ac - disassociating
[ 8319.392254] wlan0: authenticate with AP 00:1e:e5:94:7c:ac
[ 8319.394049] wlan0: authenticated
[ 8319.394056] wlan0: associate with AP 00:1e:e5:94:7c:ac
[ 8319.396262] wlan0: RX ReassocResp from 00:1e:e5:94:7c:ac (capab=0x471 status=0 aid=2)
[ 8319.396268] wlan0: associated
[ 8662.050168] wlan0: no probe response from AP 00:1e:e5:94:7c:ac - disassociating
[ 8663.453452] wlan0: authenticate with AP 00:1e:e5:94:7c:ac
[ 8663.457108] wlan0: authenticated
[ 8663.457115] wlan0: associate with AP 00:1e:e5:94:7c:ac
[ 8663.462019] wlan0: RX ReassocResp from 00:1e:e5:94:7c:ac (capab=0x471 status=0 aid=2)
[ 8663.462027] wlan0: associated
[ 9040.351697] usb 1-2: USB disconnect, address 9
[ 9341.920042] usb 1-2: new high speed USB device using ehci_hcd and address 10
[ 9342.075097] usb 1-2: configuration #1 chosen from 1 choice
[ 9342.097634] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
[ 9342.097642] usb 1-2: firmware: requesting dvb-usb-af9015.fw
[ 9342.100217] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 9342.100231] dvb_usb_af9015: probe of 1-2:1.0 failed with error -2
[ 9342.106119] Afatech DVB-T: Fixing fullspeed to highspeed interval: 16 -> 8
[ 9342.106536] input: Afatech DVB-T as /devices/pci0000:00/0000:00:04.1/usb1/1-2/1-2:1.1/input/input18
[ 9342.106617] generic-usb 0003:15A4:9016.0008: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T] on usb-0000:00:04.1-2/input1