Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [ 0.000000] Detected 1994.728 MHz processor. [ 0.001355] Console: colour VGA+ 80x25 [ 0.001358] console [tty0] enabled comm: file 1 is not in sorted order comm: file 2 is not in sorted order [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.45 BogoMIPS (lpj=7978912) [ 0.004947] Mount-cache hash table entries: 256 [ 0.005182] Initializing cgroup subsys ns [ 0.005347] Initializing cgroup subsys freezer [ 0.005398] Initializing cgroup subsys net_cls [ 0.005464] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005546] CPU: L2 cache: 1024K [ 0.005596] CPU 0/0x0 -> Node 0 [ 0.005645] CPU: Physical Processor ID: 0 [ 0.005694] CPU: Processor Core ID: 0 [ 0.005744] using mwait in idle threads. [ 0.005793] Performance Counters: Core2 events, Intel PMU driver. [ 0.005913] ... version: 2 [ 0.005962] ... bit width: 40 [ 0.006011] ... generic counters: 2 [ 0.006062] ... value mask: 000000ffffffffff [ 0.006114] ... max period: 000000007fffffff [ 0.006860] ... fixed-purpose counters: 3 [ 0.006909] ... counter mask: 0000000700000003 [ 0.024467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066461] CPU0: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz stepping 0d [ 0.004000] Calibrating delay using timer specific routine.. 3989.90 BogoMIPS (lpj=7979808) [ 0.152312] CPU1: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz stepping 0d [ 0.152785] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156027] Brought up 2 CPUs [ 0.156078] Total of 2 processors activated (7979.36 BogoMIPS). [ 0.156193] CPU1 attaching sched-domain: [ 0.156274] Time: 21:40:33 Date: 09/29/09 [ 0.156274] NET: Registered protocol family 16 [ 0.156376] ACPI: bus type pci registered [ 0.156495] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156550] PCI: MCFG area at e0000000 reserved in E820 [ 0.164007] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.164059] PCI: Using configuration type 1 for base access [ 0.165072] bio: create slab at 0 [ 0.170271] ACPI: BIOS _OSI(Linux) query ignored [ 0.171849] ACPI: Interpreter enabled [ 0.171901] ACPI: (supports S0 S3 S4 S5) [ 0.172086] ACPI: Using IOAPIC for interrupt routing [ 0.215201] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.215257] ACPI: EC: driver started in poll mode [ 0.215646] ACPI: No dock devices found. [ 0.216286] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.216443] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff] [ 0.216451] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.216457] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.216503] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff] [ 0.217025] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.217261] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.217317] pci 0000:00:1b.0: PME# disabled [ 0.217461] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.217518] pci 0000:00:1c.0: PME# disabled [ 0.217663] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.217719] pci 0000:00:1c.1: PME# disabled [ 0.217866] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.217922] pci 0000:00:1c.2: PME# disabled [ 0.218070] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.218127] pci 0000:00:1c.3: PME# disabled [ 0.218273] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.218329] pci 0000:00:1c.5: PME# disabled [ 0.218461] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.218565] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.218669] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.218772] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff] [ 0.218846] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.218903] pci 0000:00:1d.7: PME# disabled [ 0.219221] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.219230] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.219239] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.219247] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.219256] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.219265] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff] [ 0.219319] pci 0000:00:1f.2: PME# supported from D3hot [ 0.219373] pci 0000:00:1f.2: PME# disabled [ 0.219467] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.219489] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.219594] pci 0000:02:00.0: reg 10 32bit mmio: [0xf4500000-0xf45000ff] [ 0.219673] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.219831] pci 0000:02:00.2: reg 10 32bit mmio: [0xf4500400-0xf45004ff] [ 0.220069] pci 0000:02:00.3: reg 10 32bit mmio: [0xf4500800-0xf45008ff] [ 0.220299] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4500000-0xf45fffff] [ 0.220524] pci 0000:04:00.0: reg 10 64bit mmio: [0xf4700000-0xf4701fff] [ 0.220698] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.220778] pci 0000:04:00.0: PME# disabled [ 0.220939] pci 0000:00:1c.2: bridge 32bit mmio: [0xf4700000-0xf47fffff] [ 0.221010] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] [ 0.221014] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.221023] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf6000000-0xf7ffffff] [ 0.221252] pci 0000:07:00.0: reg 10 64bit mmio: [0xf4600000-0xf460ffff] [ 0.221497] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.221593] pci 0000:07:00.0: PME# disabled [ 0.221751] pci 0000:00:1c.5: bridge 32bit mmio: [0xf4600000-0xf46fffff] [ 0.221828] pci 0000:00:1e.0: transparent bridge [ 0.221935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.222085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.222185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.222303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.222374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.222453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.222527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.233380] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.233918] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.234450] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.234985] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.235560] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.236101] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.236633] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.237166] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 7 11 12 14 15) [ 0.237785] SCSI subsystem initialized [ 0.237879] libata version 3.00 loaded. [ 0.237879] usbcore: registered new interface driver usbfs [ 0.237879] usbcore: registered new interface driver hub [ 0.237879] usbcore: registered new device driver usb [ 0.237879] ACPI: WMI: Mapper loaded [ 0.237879] PCI: Using ACPI for IRQ routing [ 0.248009] Bluetooth: Core ver 2.15 [ 0.248087] NET: Registered protocol family 31 [ 0.248138] Bluetooth: HCI device and connection manager initialized [ 0.248192] Bluetooth: HCI socket layer initialized [ 0.248243] NetLabel: Initializing [ 0.248291] NetLabel: domain hash size = 128 [ 0.248341] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.248404] NetLabel: unlabeled traffic allowed by default [ 0.248507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.248717] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.264014] pnp: PnP ACPI init [ 0.264089] ACPI: bus type pnp registered [ 0.268610] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.284943] ACPI: ACPI bus type pnp unregistered [ 0.285007] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.285067] system 00:05: ioport range 0x680-0x69f has been reserved [ 0.285231] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.285285] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.285340] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.285394] system 00:05: ioport range 0x1180-0x11ff has been reserved [ 0.285448] system 00:05: ioport range 0x164e-0x164f has been reserved [ 0.285557] system 00:05: ioport range 0xff00-0xff7f has been reserved [ 0.290729] AppArmor: AppArmor Filesystem Enabled [ 0.290874] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.290927] pci 0000:00:1c.0: IO window: disabled [ 0.290983] pci 0000:00:1c.0: MEM window: 0xf4500000-0xf45fffff [ 0.291040] pci 0000:00:1c.0: PREFETCH window: 0xc0000000-0xc00fffff [ 0.291097] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.291149] pci 0000:00:1c.1: IO window: disabled [ 0.291204] pci 0000:00:1c.1: MEM window: disabled [ 0.291258] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.291365] pci 0000:00:1c.2: IO window: disabled [ 0.291642] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff [ 0.291698] pci 0000:00:1c.3: PREFETCH window: 0x000000f6000000-0x000000f7ffffff [ 0.291771] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07 [ 0.291824] pci 0000:00:1c.5: IO window: disabled [ 0.291879] pci 0000:00:1c.5: MEM window: 0xf4600000-0xf46fffff [ 0.291935] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.291990] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.292048] pci 0000:00:1e.0: IO window: disabled [ 0.292103] pci 0000:00:1e.0: MEM window: disabled [ 0.292158] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.292223] alloc irq_desc for 17 on node 0 [ 0.292225] alloc kstat_irqs on node 0 [ 0.292298] alloc irq_desc for 16 on node 0 [ 0.292430] pci 0000:00:1c.2: setting latency timer to 64 [ 0.292441] alloc kstat_irqs on node 0 [ 0.292501] pci 0000:00:1c.3: setting latency timer to 64 [ 0.292510] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.292567] pci 0000:00:1c.5: setting latency timer to 64 [ 0.292575] pci 0000:00:1e.0: setting latency timer to 64 [ 0.292585] pci_bus 0000:02: resource 1 mem: [0xf4500000-0xf45fffff] [ 0.292590] pci_bus 0000:04: resource 1 mem: [0xf4700000-0xf47fffff] [ 0.292593] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] [ 0.292595] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf3ffffff] [ 0.292600] pci_bus 0000:07: resource 1 mem: [0xf4600000-0xf46fffff] [ 0.292605] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.292642] NET: Registered protocol family 2 [ 0.292880] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.294420] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.299619] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.300315] TCP: Hash tables configured (established 524288 bind 65536) [ 0.300374] TCP reno registered [ 0.300557] NET: Registered protocol family 1 [ 0.300695] Trying to unpack rootfs image as initramfs... [ 0.500918] Switched to high resolution mode on CPU 1 [ 0.504033] Switched to high resolution mode on CPU 0 [ 0.510115] Freeing initrd memory: 8747k freed [ 0.515299] Simple Boot Flag at 0x36 set to 0x80 [ 0.515502] Scanning for low memory corruption every 60 seconds [ 0.515743] audit: initializing netlink socket (disabled) [ 0.515812] type=2000 audit(1254260433.513:1): initialized [ 0.525841] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.527315] VFS: Disk quotas dquot_6.5.2 [ 0.527423] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.528077] fuse init (API version 7.12) [ 0.528206] msgmni has been set to 5960 [ 0.528468] alg: No test for stdrng (krng) [ 0.528530] io scheduler noop registered [ 0.528580] io scheduler anticipatory registered [ 0.528632] io scheduler deadline registered (default) [ 0.528728] io scheduler cfq registered [ 0.528789] pci 0000:00:02.0: Boot video device [ 0.529124] alloc irq_desc for 24 on node 0 [ 0.529127] alloc kstat_irqs on node 0 [ 0.529140] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.529152] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.529339] alloc irq_desc for 25 on node 0 [ 0.529341] alloc kstat_irqs on node 0 [ 0.529351] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.529362] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.529553] alloc irq_desc for 26 on node 0 [ 0.529555] alloc kstat_irqs on node 0 [ 0.529564] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.529576] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.529761] alloc irq_desc for 27 on node 0 [ 0.529763] alloc kstat_irqs on node 0 [ 0.529772] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.529783] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.529964] alloc irq_desc for 28 on node 0 [ 0.529966] alloc kstat_irqs on node 0 [ 0.529976] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X [ 0.529987] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.530105] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.530336] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.536390] ACPI: AC Adapter [ACAD] (on-line) [ 0.536528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.536597] ACPI: Power Button [PWRF] [ 0.536700] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.536825] ACPI: Lid Switch [LID0] [ 0.536916] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.536985] ACPI: Power Button [PWRB] [ 0.537998] ACPI: SSDT 00000000bdb1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.539342] ACPI: SSDT 00000000bdb18620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.542055] Monitor-Mwait will be used to enter C-1 state [ 0.542080] Monitor-Mwait will be used to enter C-2 state [ 0.542088] Marking TSC unstable due to TSC halts in idle [ 0.542163] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.542336] processor LNXCPU:00: registered as cooling_device0 [ 0.542391] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.542998] ACPI: SSDT 00000000bdb19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.543546] ACPI: SSDT 00000000bdb19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.544775] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.544942] processor LNXCPU:01: registered as cooling_device1 [ 0.544998] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.572809] ACPI: Invalid active0 threshold [ 0.577821] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.577917] ACPI: Thermal Zone [TZ00] (64 C) [ 0.756493] ACPI: Battery Slot [BAT1] (battery present) [ 0.756691] Linux agpgart interface v0.103 [ 0.756746] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.758041] brd: module loaded [ 0.758533] loop: module loaded [ 0.758665] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.758872] ahci 0000:00:1f.2: version 3.0 [ 0.758890] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.758985] alloc irq_desc for 29 on node 0 [ 0.758987] alloc kstat_irqs on node 0 [ 0.759002] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.759047] ahci: SSS flag set, parallel bus scan disabled [ 0.759130] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 0.759200] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems [ 0.759273] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.764074] scsi0 : ahci [ 0.764228] scsi1 : ahci [ 0.764332] scsi2 : ahci [ 0.764431] scsi3 : ahci [ 0.764523] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 29 [ 0.764593] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 29 [ 0.764660] ata3: DUMMY [ 0.764708] ata4: DUMMY [ 0.765685] Fixed MDIO Bus: probed [ 0.765768] PPP generic driver version 2.4.2 [ 0.765924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.766032] alloc irq_desc for 20 on node 0 [ 0.766034] alloc kstat_irqs on node 0 [ 0.766040] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.766114] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.766118] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.766231] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.770204] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.770261] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.770278] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf4a04800 [ 0.784013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.784138] usb usb1: configuration #1 chosen from 1 choice [ 0.784218] hub 1-0:1.0: USB hub found [ 0.784276] hub 1-0:1.0: 6 ports detected [ 0.784430] alloc irq_desc for 23 on node 0 [ 0.784432] alloc kstat_irqs on node 0 [ 0.784437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.784503] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.784507] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.784593] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.788578] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.788635] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.788649] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00 [ 0.804015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.804139] usb usb2: configuration #1 chosen from 1 choice [ 0.804217] hub 2-0:1.0: USB hub found [ 0.804273] hub 2-0:1.0: 6 ports detected [ 0.804396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.804468] uhci_hcd: USB Universal Host Controller Interface driver [ 0.804615] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.804677] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.804681] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.804773] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.804878] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 0.805016] usb usb3: configuration #1 chosen from 1 choice [ 0.805095] hub 3-0:1.0: USB hub found [ 0.805150] hub 3-0:1.0: 2 ports detected [ 0.805291] alloc irq_desc for 21 on node 0 [ 0.805293] alloc kstat_irqs on node 0 [ 0.805298] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.805359] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.805363] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.805449] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.805552] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 0.805689] usb usb4: configuration #1 chosen from 1 choice [ 0.805769] hub 4-0:1.0: USB hub found [ 0.805825] hub 4-0:1.0: 2 ports detected [ 0.805956] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.806017] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.806020] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.806103] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.806199] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.806332] usb usb5: configuration #1 chosen from 1 choice [ 0.806409] hub 5-0:1.0: USB hub found [ 0.806467] hub 5-0:1.0: 2 ports detected [ 0.806601] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.806662] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.806666] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.806756] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.806850] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.806982] usb usb6: configuration #1 chosen from 1 choice [ 0.807059] hub 6-0:1.0: USB hub found [ 0.807116] hub 6-0:1.0: 2 ports detected [ 0.807247] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.807308] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.807312] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.807394] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.807497] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 0.807630] usb usb7: configuration #1 chosen from 1 choice [ 0.807706] hub 7-0:1.0: USB hub found [ 0.807765] hub 7-0:1.0: 2 ports detected [ 0.807897] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.807958] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.807962] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.808065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.808168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.808300] usb usb8: configuration #1 chosen from 1 choice [ 0.808380] hub 8-0:1.0: USB hub found [ 0.808434] hub 8-0:1.0: 2 ports detected [ 0.808592] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.848306] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.848362] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.848517] mice: PS/2 mouse device common for all mice [ 0.850575] rtc_cmos 00:06: RTC can wake from S4 [ 0.850669] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.850753] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.850914] device-mapper: uevent: version 1.0.3 [ 0.851059] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.851211] device-mapper: multipath: version 1.1.0 loaded [ 0.851266] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.851537] cpuidle: using governor ladder [ 0.851676] cpuidle: using governor menu [ 0.852152] TCP cubic registered [ 0.852329] NET: Registered protocol family 10 [ 0.852801] lo: Disabled Privacy Extensions [ 0.853152] NET: Registered protocol family 17 [ 0.853222] Bluetooth: L2CAP ver 2.13 [ 0.853272] Bluetooth: L2CAP socket layer initialized [ 0.853325] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.853377] Bluetooth: SCO socket layer initialized [ 0.853475] Bluetooth: RFCOMM TTY layer initialized [ 0.853535] Bluetooth: RFCOMM socket layer initialized [ 0.853587] Bluetooth: RFCOMM ver 1.11 [ 0.854410] PM: Resume from disk failed. [ 0.854423] registered taskstats version 1 [ 0.854602] Magic number: 9:559:703 [ 0.854766] rtc_cmos 00:06: setting system clock to 2009-09-29 21:40:34 UTC (1254260434) [ 0.854836] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.854890] EDD information not available. [ 0.874256] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.000068] Clocksource tsc unstable (delta = -137631336 ns) [ 1.084068] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.124402] ata1.00: ATA-8: WDC WD1600BEVT-88ZCT0, 11.01A11, max UDMA/133 [ 1.124458] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.125843] ata1.00: configured for UDMA/133 [ 1.140152] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-8 11.0 PQ: 0 ANSI: 5 [ 1.140340] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.140427] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.140536] sd 0:0:0:0: [sda] Write Protect is off [ 1.140589] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.140611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.140802] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.160079] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.208059] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 1.496335] usb 2-3: configuration #1 chosen from 1 choice [ 1.736067] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.864079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.867707] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RV06, max UDMA/133 [ 1.872517] ata2.00: configured for UDMA/133 [ 1.908048] usb 3-1: configuration #1 chosen from 1 choice [ 1.999152] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RV06 PQ: 0 ANSI: 5 [ 2.333712] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.333782] Uniform CD-ROM driver Revision: 3.20 [ 2.333920] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.333969] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.334107] Freeing unused kernel memory: 660k freed [ 2.334377] Write protecting the kernel read-only data: 7544k [ 2.459243] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 2.459680] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 2.464709] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.482107] [drm] Initialized drm 1.1.0 20060810 [ 2.492813] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.492881] i915 0000:00:02.0: setting latency timer to 64 [ 2.523392] tg3.c:v3.99 (April 20, 2009) [ 2.523514] tg3 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.523621] tg3 0000:07:00.0: setting latency timer to 64 [ 2.532110] tg3 0000:07:00.0: PME# disabled [ 2.548614] alloc irq_desc for 30 on node 0 [ 2.548618] alloc kstat_irqs on node 0 [ 2.548630] i915 0000:00:02.0: irq 30 for MSI/MSI-X [ 2.658992] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B [ 2.668778] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D [ 2.789968] i2c-adapter i2c-2: unable to read EDID block. [ 2.790044] i915 0000:00:02.0: DVI-D-1: no EDID data [ 2.802006] [drm] fb0: inteldrmfb frame buffer device [ 2.831052] acpi device:0a: registered as cooling_device2 [ 2.831354] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input5 [ 2.831462] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.831551] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.216412] [drm] LVDS-8: set mode 1280x800 14 [ 4.515634] Console: switching to colour frame buffer device 160x50 [ 4.717920] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1e:ec:9a:62:b5 [ 4.717980] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0]) [ 4.718025] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 4.718064] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 19.884759] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 19.884763] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 19.884768] PM: Marking nosave pages: 00000000bd6b3000 - 00000000bd6b9000 [ 19.884771] PM: Marking nosave pages: 00000000bd7b2000 - 00000000bd80f000 [ 19.884776] PM: Marking nosave pages: 00000000bd907000 - 00000000bdb0f000 [ 19.884793] PM: Marking nosave pages: 00000000bdb18000 - 00000000bdb1f000 [ 19.884795] PM: Basic memory bitmaps created [ 19.936232] PM: Basic memory bitmaps freed [ 19.976050] EXT4-fs (dm-3): barriers enabled [ 19.986561] kjournald2 starting: pid 487, dev dm-3:8, commit interval 5 seconds [ 19.986591] EXT4-fs (dm-3): delayed allocation enabled [ 19.986594] EXT4-fs: file extents enabled [ 19.987973] EXT4-fs: mballoc enabled [ 19.987990] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 22.963763] udev: starting version 143 [ 23.963276] udev: renamed network interface eth0 to eth1 [ 24.390232] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 24.390372] usbcore: registered new interface driver btusb [ 24.425105] cfg80211: Calling CRDA to update world regulatory domain [ 24.634560] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.637954] sdhci: Secure Digital Host Controller Interface driver [ 24.637957] sdhci: Copyright(c) Pierre Ossman [ 24.641128] lp: driver loaded but no devices found [ 24.641430] jmb38x_ms 0000:02:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.641442] jmb38x_ms 0000:02:00.3: setting latency timer to 64 [ 24.653595] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0) [ 24.653624] sdhci-pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.653703] sdhci-pci 0000:02:00.0: setting latency timer to 64 [ 24.653763] Registered led device: mmc0:: [ 24.653812] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA [ 24.653874] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0) [ 24.653898] sdhci-pci 0000:02:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.653909] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface. [ 24.653919] sdhci-pci 0000:02:00.2: PCI INT A disabled [ 24.662879] Linux video capture interface: v2.00 [ 24.805516] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b090) [ 24.808771] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input6 [ 24.808833] usbcore: registered new interface driver uvcvideo [ 24.808836] USB Video Class driver (v0.1.0) [ 25.098231] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 [ 25.135304] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 25.140967] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 25.140970] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 25.141204] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 25.141244] iwlagn 0000:04:00.0: setting latency timer to 64 [ 25.141332] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 25.189289] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 25.189373] alloc irq_desc for 31 on node 0 [ 25.189375] alloc kstat_irqs on node 0 [ 25.189401] iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X [ 25.991801] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 26.013008] udev: renamed network interface wlan0 to wlan1 [ 26.063336] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 26.063351] alloc irq_desc for 22 on node 0 [ 26.063354] alloc kstat_irqs on node 0 [ 26.063361] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 26.063423] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 26.261283] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 26.261362] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 26.261417] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 58.831841] EXT4-fs (dm-3): internal journal on dm-3:8 [ 62.044638] tg3 0000:07:00.0: PME# disabled [ 62.044879] alloc irq_desc for 32 on node 0 [ 62.044882] alloc kstat_irqs on node 0 [ 62.044916] tg3 0000:07:00.0: irq 32 for MSI/MSI-X [ 62.098362] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 63.688060] tg3: eth1: Link is up at 100 Mbps, full duplex. [ 63.688064] tg3: eth1: Flow control is off for TX and off for RX. [ 63.688566] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 74.300014] eth1: no IPv6 routers present