[ 0.000000] Linux version 2.6.22-12-generic (buildd@crested) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 20:03:18 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] Command line: root=UUID=6eefb837-764e-4a45-b9d2-b7c04e15a1b5 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 917216) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1179648 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F6F10, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT DFEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP DFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT DFEE3180, 4A88 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS DFEE0000, 0040 [ 0.000000] ACPI: HPET DFEE7D80, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG DFEE7E00, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC DFEE7C80, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT DFEE7E80, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT DFEE8430, 0275 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 917216) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1179648 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 917216 [ 0.000000] 0: 1048576 -> 1179648 [ 0.000000] On node 0 totalpages: 1048190 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1133 pages reserved [ 0.000000] DMA zone: 2809 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] Processor #3 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] Processor #2 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dfef0000 - 00000000dff00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000dff00000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: dff00000:10100000) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1030929 [ 0.000000] Kernel command line: root=UUID=6eefb837-764e-4a45-b9d2-b7c04e15a1b5 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 41.816991] time.c: Detected 2400.000 MHz processor. [ 41.818058] Console: colour VGA+ 80x25 [ 41.818074] Checking aperture... [ 41.818082] Calgary: detecting Calgary via BIOS EBDA area [ 41.818083] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 41.818085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 41.862635] Placing software IO TLB between 0x104c000 - 0x504c000 [ 41.898822] Memory: 4050244k/4718592k available (2281k kernel code, 142516k reserved, 1182k data, 300k init) [ 41.898861] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 41.975077] Calibrating delay using timer specific routine.. 4803.29 BogoMIPS (lpj=9606589) [ 41.975104] Security Framework v1.0.0 initialized [ 41.975111] SELinux: Disabled at boot. [ 41.975398] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 41.977938] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 41.979223] Mount-cache hash table entries: 256 [ 41.979345] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.979348] CPU: L2 cache: 4096K [ 41.979350] CPU 0/0 -> Node 0 [ 41.979352] using mwait in idle threads. [ 41.979353] CPU: Physical Processor ID: 0 [ 41.979354] CPU: Processor Core ID: 0 [ 41.979359] CPU0: Thermal monitoring enabled (TM2) [ 41.979369] SMP alternatives: switching to UP code [ 41.979604] Early unpacking initramfs... done [ 42.253603] ACPI: Core revision 20070126 [ 42.253638] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 42.296437] Using local APIC timer interrupts. [ 42.338043] result 16666668 [ 42.338044] Detected 16.666 MHz APIC timer. [ 42.338554] SMP alternatives: switching to SMP code [ 42.338630] Booting processor 1/4 APIC 0x3 [ 42.348968] Initializing CPU#1 [ 42.426369] Calibrating delay using timer specific routine.. 4800.22 BogoMIPS (lpj=9600447) [ 42.426375] CPU: L1 I cache: 32K, L1 D cache: 32K [ 42.426377] CPU: L2 cache: 4096K [ 42.426379] CPU 1/3 -> Node 0 [ 42.426380] CPU: Physical Processor ID: 0 [ 42.426381] CPU: Processor Core ID: 3 [ 42.426386] CPU1: Thermal monitoring enabled (TM2) [ 42.426811] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 42.426914] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 42.450368] SMP alternatives: switching to SMP code [ 42.450389] Booting processor 2/4 APIC 0x2 [ 42.460727] Initializing CPU#2 [ 42.538195] Calibrating delay using timer specific routine.. 4800.22 BogoMIPS (lpj=9600453) [ 42.538201] CPU: L1 I cache: 32K, L1 D cache: 32K [ 42.538202] CPU: L2 cache: 4096K [ 42.538204] CPU 2/2 -> Node 0 [ 42.538206] CPU: Physical Processor ID: 0 [ 42.538207] CPU: Processor Core ID: 2 [ 42.538211] CPU2: Thermal monitoring enabled (TM2) [ 42.538636] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 42.538672] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 42.562199] SMP alternatives: switching to SMP code [ 42.562221] Booting processor 3/4 APIC 0x1 [ 42.572558] Initializing CPU#3 [ 42.650020] Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=9600222) [ 42.650026] CPU: L1 I cache: 32K, L1 D cache: 32K [ 42.650027] CPU: L2 cache: 4096K [ 42.650029] CPU 3/1 -> Node 0 [ 42.650031] CPU: Physical Processor ID: 0 [ 42.650032] CPU: Processor Core ID: 1 [ 42.650036] CPU3: Thermal monitoring enabled (TM2) [ 42.650463] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 42.650504] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 42.673995] Brought up 4 CPUs [ 43.357660] migration_cost=13,4260 [ 43.357855] NET: Registered protocol family 16 [ 43.357924] ACPI: bus type pci registered [ 43.357929] PCI: Using configuration type 1 [ 43.357931] mtrr: your CPUs had inconsistent variable MTRR settings [ 43.357932] mtrr: probably your BIOS does not setup all CPUs. [ 43.357933] mtrr: corrected configuration. [ 43.358868] ACPI: EC: Look up EC in DSDT [ 43.362319] ACPI: Interpreter enabled [ 43.362329] ACPI: (supports S0 S3 S4 S5) [ 43.362347] ACPI: Using IOAPIC for interrupt routing [ 43.366986] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 43.367001] PCI: Probing PCI hardware (bus 00) [ 43.368226] PCI: Transparent bridge - 0000:00:1e.0 [ 43.368277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 43.368400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 43.368459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 43.368519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 43.368577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 43.380250] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 43.380327] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 43.380402] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 43.380478] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 43.380553] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 43.380628] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 43.380703] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 43.380777] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 43.380847] Linux Plug and Play Support v0.97 (c) Adam Belay [ 43.380856] pnp: PnP ACPI init [ 43.380861] ACPI: bus type pnp registered [ 43.382849] pnp: PnP ACPI: found 15 devices [ 43.382851] ACPI: ACPI bus type pnp unregistered [ 43.382889] PCI: Using ACPI for IRQ routing [ 43.382892] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 43.382969] NET: Registered protocol family 8 [ 43.382970] NET: Registered protocol family 20 [ 43.382982] PCI-GART: No AMD northbridge found. [ 43.382986] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 43.382989] hpet0: 4 64-bit timers, 14318180 Hz [ 43.384048] pnp: 00:0b: ioport range 0x400-0x4bf has been reserved [ 43.384051] pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 43.384055] pnp: 00:0d: iomem range 0xd1e00-0xd3fff has been reserved [ 43.384057] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 43.384059] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 43.384061] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 43.384267] PCI: Bridge: 0000:00:01.0 [ 43.384269] IO window: b000-bfff [ 43.384272] MEM window: f4000000-f7ffffff [ 43.384274] PREFETCH window: e0000000-efffffff [ 43.384277] PCI: Bridge: 0000:00:1c.0 [ 43.384279] IO window: a000-afff [ 43.384282] MEM window: disabled. [ 43.384285] PREFETCH window: disabled. [ 43.384289] PCI: Bridge: 0000:00:1c.3 [ 43.384291] IO window: c000-cfff [ 43.384294] MEM window: fa000000-fa0fffff [ 43.384297] PREFETCH window: disabled. [ 43.384301] PCI: Bridge: 0000:00:1c.4 [ 43.384303] IO window: d000-dfff [ 43.384306] MEM window: f8000000-f9ffffff [ 43.384309] PREFETCH window: fa300000-fa3fffff [ 43.384313] PCI: Bridge: 0000:00:1e.0 [ 43.384314] IO window: disabled. [ 43.384318] MEM window: fa100000-fa1fffff [ 43.384320] PREFETCH window: disabled. [ 43.384331] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.384335] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 43.384348] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.384351] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 43.384365] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 43.384368] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 43.384381] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.384384] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 43.384392] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 43.384400] NET: Registered protocol family 2 [ 43.384876] Time: tsc clocksource has been installed. [ 43.428103] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 43.429124] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 43.436005] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 43.436690] TCP: Hash tables configured (established 524288 bind 65536) [ 43.436692] TCP reno registered [ 43.448141] checking if image is initramfs... it is [ 43.989977] Freeing initrd memory: 7198k freed [ 43.993510] audit: initializing netlink socket (disabled) [ 43.993527] audit(1191082100.100:1): initialized [ 43.995075] VFS: Disk quotas dquot_6.5.1 [ 43.995113] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 43.995185] io scheduler noop registered [ 43.995187] io scheduler anticipatory registered [ 43.995188] io scheduler deadline registered [ 43.995255] io scheduler cfq registered (default) [ 43.998627] Boot video device is 0000:01:00.0 [ 43.998741] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 43.998765] assign_interrupt_mode Found MSI capability [ 43.998786] Allocate Port Service[0000:00:01.0:pcie00] [ 43.998844] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 43.998874] assign_interrupt_mode Found MSI capability [ 43.998899] Allocate Port Service[0000:00:1c.0:pcie00] [ 43.998923] Allocate Port Service[0000:00:1c.0:pcie02] [ 43.998979] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 43.999009] assign_interrupt_mode Found MSI capability [ 43.999034] Allocate Port Service[0000:00:1c.3:pcie00] [ 43.999054] Allocate Port Service[0000:00:1c.3:pcie02] [ 43.999114] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 43.999145] assign_interrupt_mode Found MSI capability [ 43.999175] Allocate Port Service[0000:00:1c.4:pcie00] [ 43.999197] Allocate Port Service[0000:00:1c.4:pcie02] [ 44.013662] Real Time Clock Driver v1.12ac [ 44.013744] Linux agpgart interface v0.102 (c) Dave Jones [ 44.013747] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 44.013830] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.014236] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.014719] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 44.014814] input: Macintosh mouse button emulation as /class/input/input0 [ 44.014870] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 44.015137] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 44.015141] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 44.015282] mice: PS/2 mouse device common for all mice [ 44.015791] TCP cubic registered [ 44.015826] NET: Registered protocol family 1 [ 44.015990] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 44.015997] Freeing unused kernel memory: 300k freed [ 44.037148] input: AT Translated Set 2 keyboard as /class/input/input1 [ 45.138707] AppArmor: AppArmor initialized<5>audit(1191082101.248:2): type=1505 info="AppArmor initialized" pid=1281 [ 45.143121] fuse init (API version 7.8) [ 45.146918] Failure registering capabilities with primary security module. [ 45.184201] ACPI: Processor [CPU0] (supports 2 throttling states) [ 45.184297] ACPI: SSDT DFEE8280, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 45.184382] ACPI: Processor [CPU1] (supports 2 throttling states) [ 45.184457] ACPI: SSDT DFEE8310, 0087 (r1 PmRef Cpu2Ist 3000 INTL 20040311) [ 45.184537] ACPI: Processor [CPU2] (supports 2 throttling states) [ 45.184611] ACPI: SSDT DFEE83A0, 0087 (r1 PmRef Cpu3Ist 3000 INTL 20040311) [ 45.184692] ACPI: Processor [CPU3] (supports 2 throttling states) [ 45.451803] usbcore: registered new interface driver usbfs [ 45.451824] usbcore: registered new interface driver hub [ 45.451842] usbcore: registered new device driver usb [ 45.452323] USB Universal Host Controller Interface driver v3.0 [ 45.452399] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 45.452408] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 45.452411] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 45.452531] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 45.452555] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 45.452636] usb usb1: configuration #1 chosen from 1 choice [ 45.452656] hub 1-0:1.0: USB hub found [ 45.452660] hub 1-0:1.0: 2 ports detected [ 45.477240] SCSI subsystem initialized [ 45.485066] libata version 2.21 loaded. [ 45.487123] Floppy drive(s): fd0 is 1.44M [ 45.506081] FDC 0 is a post-1991 82077 [ 45.554832] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 45.554843] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 45.554845] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 45.554863] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 45.554887] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 45.554958] usb usb2: configuration #1 chosen from 1 choice [ 45.554979] hub 2-0:1.0: USB hub found [ 45.554983] hub 2-0:1.0: 2 ports detected [ 45.658948] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 45.658956] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 45.658959] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 45.658981] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 45.659004] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 45.659088] usb usb3: configuration #1 chosen from 1 choice [ 45.659107] hub 3-0:1.0: USB hub found [ 45.659111] hub 3-0:1.0: 2 ports detected [ 45.763208] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 45.763215] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 45.763219] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 45.763244] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 45.763269] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 45.763351] usb usb4: configuration #1 chosen from 1 choice [ 45.763367] hub 4-0:1.0: USB hub found [ 45.763371] hub 4-0:1.0: 2 ports detected [ 45.867468] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 45.867476] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 45.867479] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 45.867500] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 45.867524] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 45.867610] usb usb5: configuration #1 chosen from 1 choice [ 45.867626] hub 5-0:1.0: USB hub found [ 45.867631] hub 5-0:1.0: 2 ports detected [ 45.971730] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 45.971737] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 45.971740] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 45.971760] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 45.971782] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 45.971866] usb usb6: configuration #1 chosen from 1 choice [ 45.971883] hub 6-0:1.0: USB hub found [ 45.971887] hub 6-0:1.0: 2 ports detected [ 46.076222] ahci 0000:00:1f.2: version 2.2 [ 46.076239] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 47.081599] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 47.081604] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part [ 47.081608] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 47.081897] scsi0 : ahci [ 47.081940] scsi1 : ahci [ 47.081966] scsi2 : ahci [ 47.081991] scsi3 : ahci [ 47.082021] scsi4 : ahci [ 47.082046] scsi5 : ahci [ 47.082119] ata1: SATA max UDMA/133 cmd 0xffffc20001436100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 507 [ 47.082122] ata2: SATA max UDMA/133 cmd 0xffffc20001436180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 507 [ 47.082125] ata3: SATA max UDMA/133 cmd 0xffffc20001436200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 507 [ 47.082128] ata4: SATA max UDMA/133 cmd 0xffffc20001436280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 507 [ 47.082131] ata5: SATA max UDMA/133 cmd 0xffffc20001436300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 507 [ 47.082134] ata6: SATA max UDMA/133 cmd 0xffffc20001436380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 507 [ 47.562397] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 47.563726] ata1.00: Host Protected Area detected: [ 47.563727] current size: 156299375 sectors [ 47.563729] native size: 156301488 sectors [ 47.563954] ata1.00: native size increased to 156301488 sectors [ 47.563961] ata1.00: ATA-6: ST380817AS, 3.42, max UDMA/133 [ 47.563965] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 47.565498] ata1.00: configured for UDMA/133 [ 47.874722] ata2: SATA link down (SStatus 0 SControl 300) [ 48.187522] ata3: SATA link down (SStatus 0 SControl 300) [ 48.500127] ata4: SATA link down (SStatus 0 SControl 300) [ 48.808541] ata5: SATA link down (SStatus 0 SControl 300) [ 49.120950] ata6: SATA link down (SStatus 0 SControl 300) [ 49.121047] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 [ 49.121155] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 49.121617] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 49.122616] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 49.122621] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 49.122675] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 49.122710] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 49.122718] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa205000 [ 49.126603] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 49.126677] usb usb7: configuration #1 chosen from 1 choice [ 49.126697] hub 7-0:1.0: USB hub found [ 49.126701] hub 7-0:1.0: 6 ports detected [ 50.122698] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 50.122702] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 50.122709] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 50.122805] scsi6 : ahci [ 50.122867] scsi7 : ahci [ 50.122930] ata7: SATA max UDMA/133 cmd 0xffffc20001438100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 [ 50.122934] ata8: SATA max UDMA/133 cmd 0xffffc20001438180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 [ 50.435366] ata7: SATA link down (SStatus 0 SControl 300) [ 50.748053] ata8: SATA link down (SStatus 0 SControl 300) [ 50.748150] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 50.749025] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 50.749031] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 50.749094] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 50.749134] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 50.749142] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa204000 [ 50.753035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 50.753125] usb usb8: configuration #1 chosen from 1 choice [ 50.753147] hub 8-0:1.0: USB hub found [ 50.753152] hub 8-0:1.0: 6 ports detected [ 50.753948] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 50.753957] sd 0:0:0:0: [sda] Write Protect is off [ 50.753958] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 50.753968] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 50.754006] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 50.754013] sd 0:0:0:0: [sda] Write Protect is off [ 50.754014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 50.754025] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 50.754029] sda: sda1 [ 50.769788] sd 0:0:0:0: [sda] Attached SCSI disk [ 50.772175] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 50.854832] PCI: Enabling device 0000:03:00.1 (0000 -> 0001) [ 50.854852] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 50.854888] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 50.855084] scsi8 : pata_jmicron [ 50.855134] scsi9 : pata_jmicron [ 50.855206] ata9: PATA max UDMA/100 cmd 0x000000000001c000 ctl 0x000000000001c102 bmdma 0x000000000001c400 irq 16 [ 50.855208] ata10: PATA max UDMA/100 cmd 0x000000000001c200 ctl 0x000000000001c302 bmdma 0x000000000001c408 irq 16 [ 51.241652] ata9.00: ATAPI: BENQ DVD DD DW1620, B7V9, max UDMA/33 [ 51.242111] ata9.01: Host Protected Area detected: [ 51.242113] current size: 156299375 sectors [ 51.242114] native size: 156301488 sectors [ 51.242485] ata9.01: native size increased to 156301488 sectors [ 51.242490] ata9.01: ATA-6: ST380011A, 8.01, max UDMA/100 [ 51.242493] ata9.01: 156301488 sectors, multi 16: LBA48 [ 51.416813] ata9.00: configured for UDMA/33 [ 51.436833] ata9.01: configured for UDMA/100 [ 51.606976] scsi 8:0:0:0: CD-ROM BENQ DVD DD DW1620 B7V9 PQ: 0 ANSI: 5 [ 51.607040] scsi 8:0:0:0: Attached scsi generic sg1 type 5 [ 51.607110] scsi 8:0:1:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5 [ 51.607163] sd 8:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 51.607171] sd 8:0:1:0: [sdb] Write Protect is off [ 51.607172] sd 8:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 51.607182] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.607213] sd 8:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 51.607220] sd 8:0:1:0: [sdb] Write Protect is off [ 51.607221] sd 8:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 51.607232] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.607235] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 > [ 51.690506] sd 8:0:1:0: [sdb] Attached SCSI disk [ 51.690538] sd 8:0:1:0: Attached scsi generic sg2 type 0 [ 51.691417] r8169 Gigabit Ethernet driver 2.2LK loaded [ 51.691436] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 51.691459] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 51.692187] eth0: RTL8168b/8111b at 0xffffc20001446000, 00:1a:4d:4f:60:00, IRQ 16 [ 51.713864] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 51.713868] Uniform CD-ROM driver Revision: 3.20 [ 51.713909] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 52.043107] Attempting manual resume [ 52.043110] swsusp: Resume From Partition 8:23 [ 52.043111] PM: Checking swsusp image. [ 52.043635] PM: Resume from disk failed. [ 52.061000] kjournald starting. Commit interval 5 seconds [ 52.061016] EXT3-fs: mounted filesystem with ordered data mode. [ 60.782101] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 60.784358] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 60.881596] acx: Loaded combined PCI/USB driver, firmware_ver=default [ 60.881598] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them [ 60.881645] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 60.881656] acx: found ACX111-based wireless network card at 0000:05:02.0, irq:18, phymem1:0xFA120000, phymem2:0xFA100000, mem1:0xffffc20001440000, mem1_size:8192, mem2:0xffffc20001480000, mem2_size:131072 [ 60.882639] acx: loading firmware for acx1111 chipset with radio ID 16 [ 61.067369] input: PC Speaker as /class/input/input2 [ 61.196206] nvidia: module license 'NVIDIA' taints kernel. [ 61.682210] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112 [ 61.682213] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01 [ 61.682215] AntennaID:00 Len:02 Data:01 02 [ 61.682217] PowerLevelID:01 Len:02 Data:001E 000A [ 61.682219] DataRatesID:02 Len:05 Data:02 04 11 22 44 [ 61.682222] DomainID:03 Len:06 Data:41 20 30 31 32 40 [ 61.682225] ProductID:04 Len:09 Data:TI ACX100 [ 61.682227] ManufacturerID:05 Len:07 Data:TI Test [ 61.741864] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' === [ 61.741964] acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.22-12-generic [ 61.742011] usbcore: registered new interface driver acx_usb [ 61.742340] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 61.743285] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 61.948718] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 61.957295] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 61.960085] parport_pc 00:08: reported by Plug and Play ACPI [ 61.960135] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 62.077384] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 62.077392] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 62.077470] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 62.201565] loop: module loaded [ 62.220808] lp0: using parport0 (interrupt-driven). [ 62.296624] Adding 995988k swap on /dev/sdb7. Priority:-1 extents:1 across:995988k [ 62.654215] EXT3 FS on sdb8, internal journal [ 63.588421] kjournald starting. Commit interval 5 seconds [ 63.588682] EXT3 FS on sdb5, internal journal [ 63.588686] EXT3-fs: mounted filesystem with ordered data mode. [ 63.621823] kjournald starting. Commit interval 5 seconds [ 63.622056] EXT3 FS on sdb6, internal journal [ 63.622061] EXT3-fs: mounted filesystem with ordered data mode. [ 64.246155] input: Power Button (FF) as /class/input/input4 [ 64.246169] ACPI: Power Button (FF) [PWRF] [ 64.246201] input: Power Button (CM) as /class/input/input5 [ 64.246211] ACPI: Power Button (CM) [PWRB] [ 64.336490] No dock devices found. [ 65.708353] ppdev: user-space parallel port driver [ 65.884069] r8169: eth1: link up [ 65.884080] r8169: eth1: link up [ 66.211946] audit(1191046123.059:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5356 profile="/usr/sbin/cupsd" [ 66.420799] Failure registering capabilities with primary security module. [ 66.772113] Bluetooth: Core ver 2.11 [ 66.772174] NET: Registered protocol family 31 [ 66.772177] Bluetooth: HCI device and connection manager initialized [ 66.772180] Bluetooth: HCI socket layer initialized [ 66.809535] Bluetooth: L2CAP ver 2.8 [ 66.809539] Bluetooth: L2CAP socket layer initialized [ 66.848158] Bluetooth: RFCOMM socket layer initialized [ 66.848181] Bluetooth: RFCOMM TTY layer initialized [ 66.848185] Bluetooth: RFCOMM ver 1.8 [ 71.138717] NET: Registered protocol family 17 [ 73.400453] NET: Registered protocol family 10 [ 73.400663] lo: Disabled Privacy Extensions [ 73.400832] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 83.638871] eth1: no IPv6 routers present