[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-server (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 23:54:28 UTC 2008 (Ubuntu 2.6.24-19.41-server) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bff0000 (usable) [ 0.000000] BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 63MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f53a0 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Entering add_active_range(0, 0, 245744) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245744 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245744 [ 0.000000] On node 0 totalpages: 245744 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 127 pages used for memmap [ 0.000000] HighMem zone: 16241 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6E00 checksum 0 [ 0.000000] ACPI: RSDP 000F6E00, 0014 (r0 VIAK8M) [ 0.000000] ACPI: RSDT 3BFF3000, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3BFF3040, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3BFF30C0, 4DD4 (r1 VIAK8M AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BFF0000, 0040 [ 0.000000] ACPI: APIC 3BFF7EC0, 005A (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243825 [ 0.000000] Kernel command line: root=/dev/mapper/rolly--dmz-root ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1799.802 MHz processor. [ 21.494818] Console: colour VGA+ 80x25 [ 21.494821] console [tty0] enabled [ 21.495068] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 21.495536] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 21.518048] Memory: 962036k/982976k available (2256k kernel code, 20344k reserved, 1031k data, 384k init, 65472k highmem) [ 21.518056] virtual kernel memory layout: [ 21.518058] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 21.518059] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 21.518060] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) [ 21.518061] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 21.518062] .init : 0xc043c000 - 0xc049c000 ( 384 kB) [ 21.518064] .data : 0xc0334285 - 0xc0435fe4 (1031 kB) [ 21.518065] .text : 0xc0100000 - 0xc0334285 (2256 kB) [ 21.518068] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 21.518106] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 21.667886] Calibrating delay using timer specific routine.. 3603.05 BogoMIPS (lpj=18015279) [ 21.667914] Security Framework initialized [ 21.667923] SELinux: Disabled at boot. [ 21.667937] AppArmor: AppArmor initialized [ 21.667941] Failure registering capabilities with primary security module. [ 21.667951] Mount-cache hash table entries: 512 [ 21.668080] Initializing cgroup subsys ns [ 21.668084] Initializing cgroup subsys cpuacct [ 21.668095] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 21.668103] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.668106] CPU: L2 Cache: 512K (64 bytes/line) [ 21.668109] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000 [ 21.668120] Compat vDSO mapped to ffffe000. [ 21.668133] Checking 'hlt' instruction... OK. [ 21.708191] SMP alternatives: switching to UP code [ 21.709613] Freeing SMP alternatives: 12k freed [ 21.709731] Early unpacking initramfs... done [ 22.039371] ACPI: Core revision 20070126 [ 22.039442] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 22.042181] CPU0: AMD Athlon(tm) 64 Processor 2800+ stepping 0a [ 22.042205] Total of 1 processors activated (3603.05 BogoMIPS). [ 22.042703] ENABLING IO-APIC IRQs [ 22.043022] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 22.256962] Brought up 1 CPUs [ 22.257009] CPU0 attaching sched-domain: [ 22.257012] domain 0: span 01 [ 22.257014] groups: 01 [ 22.257192] net_namespace: 64 bytes [ 22.257197] Booting paravirtualized kernel on bare hardware [ 22.257678] Time: 1:52:26 Date: 09/24/08 [ 22.257703] NET: Registered protocol family 16 [ 22.257868] EISA bus registered [ 22.257899] ACPI: bus type pci registered [ 22.263095] PCI: PCI BIOS revision 2.10 entry at 0xfb8d0, last bus=1 [ 22.263097] PCI: Using configuration type 1 [ 22.263102] Setting up standard PCI resources [ 22.266596] ACPI: EC: Look up EC in DSDT [ 22.271025] ACPI: Interpreter enabled [ 22.271033] ACPI: (supports S0 S3 S4 S5) [ 22.271049] ACPI: Using IOAPIC for interrupt routing [ 22.276156] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 22.276976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 22.318280] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 22.318420] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 22.318562] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 22.318689] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 22.318810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 22.318927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 22.319044] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 22.319160] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 22.319307] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 22.319440] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 22.319573] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 22.319726] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 22.319822] Linux Plug and Play Support v0.97 (c) Adam Belay [ 22.319848] pnp: PnP ACPI init [ 22.319855] ACPI: bus type pnp registered [ 22.322905] pnp: PnP ACPI: found 12 devices [ 22.322907] ACPI: ACPI bus type pnp unregistered [ 22.322911] PnPBIOS: Disabled by ACPI PNP [ 22.323105] PCI: Using ACPI for IRQ routing [ 22.323108] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 22.366772] NET: Registered protocol family 8 [ 22.366774] NET: Registered protocol family 20 [ 22.366800] NetLabel: Initializing [ 22.366802] NetLabel: domain hash size = 128 [ 22.366803] NetLabel: protocols = UNLABELED CIPSOv4 [ 22.366816] NetLabel: unlabeled traffic allowed by default [ 22.366857] AppArmor: AppArmor Filesystem Enabled [ 22.376719] Time: tsc clocksource has been installed. [ 22.396718] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 22.396722] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 22.396724] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 22.396727] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 22.396730] system 00:00: iomem range 0x3bff0000-0x3bffffff could not be reserved [ 22.396733] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 22.396736] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 22.396739] system 00:00: iomem range 0x100000-0x3bfeffff could not be reserved [ 22.396742] system 00:00: iomem range 0x3c000000-0x3fffffff has been reserved [ 22.396745] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 22.396748] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved [ 22.396751] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 22.396757] system 00:02: ioport range 0x4000-0x407f has been reserved [ 22.396759] system 00:02: ioport range 0x5000-0x500f has been reserved [ 22.396765] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 22.396767] system 00:03: ioport range 0x800-0x805 has been reserved [ 22.396770] system 00:03: ioport range 0x290-0x297 has been reserved [ 22.427088] PCI: Bridge: 0000:00:01.0 [ 22.427090] IO window: disabled. [ 22.427094] MEM window: ec000000-edffffff [ 22.427097] PREFETCH window: e8000000-ebffffff [ 22.427112] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 22.427125] NET: Registered protocol family 2 [ 22.526557] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 22.526837] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.527849] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 22.528448] TCP: Hash tables configured (established 131072 bind 65536) [ 22.528451] TCP reno registered [ 22.556562] checking if image is initramfs... it is [ 22.935800] Switched to high resolution mode on CPU 0 [ 23.194793] Freeing initrd memory: 7572k freed [ 23.195391] audit: initializing netlink socket (disabled) [ 23.195406] audit(1222221146.570:1): initialized [ 23.195588] highmem bounce pool size: 64 pages [ 23.195591] Total HugeTLB memory allocated, 0 [ 23.197454] VFS: Disk quotas dquot_6.5.1 [ 23.197533] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 23.197723] io scheduler noop registered [ 23.197726] io scheduler anticipatory registered [ 23.197728] io scheduler deadline registered (default) [ 23.197738] io scheduler cfq registered [ 23.197752] PCI: VIA PCI bridge detected. Disabling DAC. [ 23.197821] Boot video device is 0000:01:00.0 [ 23.198093] isapnp: Scanning for PnP cards... [ 23.554133] isapnp: No Plug & Play device found [ 23.580040] Real Time Clock Driver v1.12ac [ 23.580135] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 23.580245] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.580808] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.581484] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 23.581548] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 23.581630] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 23.581632] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 23.581734] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.595139] mice: PS/2 mouse device common for all mice [ 23.595242] EISA: Probing bus 0 at eisa.0 [ 23.595261] Cannot allocate resource for EISA slot 4 [ 23.595263] Cannot allocate resource for EISA slot 5 [ 23.595276] EISA: Detected 0 cards. [ 23.595278] cpuidle: using governor ladder [ 23.595280] cpuidle: using governor menu [ 23.595372] NET: Registered protocol family 1 [ 23.595400] Using IPI No-Shortcut mode [ 23.595432] registered taskstats version 1 [ 23.595536] Magic number: 8:264:863 [ 23.595633] hash matches device ptyw1 [ 23.595695] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 23.596206] Freeing unused kernel memory: 384k freed [ 23.644613] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 24.004071] ACPI: Thermal Zone [THRM] (40 C) [ 24.022110] device-mapper: uevent: version 1.0.3 [ 24.022153] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 24.663289] SCSI subsystem initialized [ 24.732261] libata version 3.00 loaded. [ 24.743112] usbcore: registered new interface driver usbfs [ 24.743138] usbcore: registered new interface driver hub [ 24.753069] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 24.753080] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 24.753142] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 24.753163] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 24.753186] ACPI: PCI interrupt for device 0000:00:0f.1 disabled [ 24.762849] usbcore: registered new device driver usb [ 24.789102] sata_via 0000:00:0f.0: version 2.3 [ 24.789124] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 24.789169] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 24.808655] scsi0 : sata_via [ 24.822671] USB Universal Host Controller Interface driver v3.0 [ 24.832634] scsi1 : sata_via [ 24.832710] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 16 [ 24.832713] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 16 [ 24.865388] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 24.865395] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 24.976648] Floppy drive(s): fd0 is 1.44M [ 24.996174] FDC 0 is a post-1991 82077 [ 25.042269] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 25.261892] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 25.272957] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 25.272965] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 25.272977] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 25.273239] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 25.273270] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000cc00 [ 25.273415] usb usb1: configuration #1 chosen from 1 choice [ 25.273440] hub 1-0:1.0: USB hub found [ 25.273445] hub 1-0:1.0: 2 ports detected [ 25.381784] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 25.381799] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 25.381822] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 25.381844] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d000 [ 25.381974] usb usb2: configuration #1 chosen from 1 choice [ 25.381997] hub 2-0:1.0: USB hub found [ 25.382003] hub 2-0:1.0: 2 ports detected [ 25.491599] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 25.491614] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 25.491641] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 25.491664] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d400 [ 25.491788] usb usb3: configuration #1 chosen from 1 choice [ 25.491811] hub 3-0:1.0: USB hub found [ 25.491817] hub 3-0:1.0: 2 ports detected [ 25.601401] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 25.601416] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 25.601439] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 25.601461] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800 [ 25.601576] usb usb4: configuration #1 chosen from 1 choice [ 25.601599] hub 4-0:1.0: USB hub found [ 25.601604] hub 4-0:1.0: 2 ports detected [ 25.711463] pata_via 0000:00:0f.1: version 0.3.3 [ 25.711489] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 25.713441] scsi2 : pata_via [ 25.714144] scsi3 : pata_via [ 25.715184] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc800 irq 14 [ 25.715187] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc808 irq 15 [ 25.820919] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 26.008052] usb 1-2: configuration #1 chosen from 1 choice [ 26.280585] ata4.00: ATA-7: ST3300831A, 3.01, max UDMA/100 [ 26.280590] ata4.00: 586072368 sectors, multi 16: LBA48 [ 26.280608] ata4.01: ATAPI: SONY CDU4811, PY0A, max UDMA/33, CDB intr [ 26.280620] ata4.00: limited to UDMA/33 due to 40-wire cable [ 26.290119] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 26.300428] ata4.00: configured for UDMA/33 [ 26.480112] ata4.01: configured for UDMA/33 [ 26.480233] scsi 3:0:0:0: Direct-Access ATA ST3300831A 3.01 PQ: 0 ANSI: 5 [ 26.480679] scsi 3:0:1:0: CD-ROM SONY CDU4811 PY0A PQ: 0 ANSI: 5 [ 26.480870] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 26.480885] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 26.480913] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 26.480951] ehci_hcd 0000:00:10.4: irq 17, io mem 0xee000000 [ 26.491934] Driver 'sd' needs updating - please use bus_type methods [ 26.492022] sd 3:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 26.492034] sd 3:0:0:0: [sda] Write Protect is off [ 26.492037] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.492051] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.492096] sd 3:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 26.492105] sd 3:0:0:0: [sda] Write Protect is off [ 26.492107] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.492120] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.492123] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 26.499779] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.499911] usb usb5: configuration #1 chosen from 1 choice [ 26.499937] hub 5-0:1.0: USB hub found [ 26.499944] hub 5-0:1.0: 8 ports detected [ 26.510151] sda1 sda2 < sda5 > [ 26.517197] sd 3:0:0:0: [sda] Attached SCSI disk [ 26.523866] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 26.523886] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 26.524846] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 26.524852] Uniform CD-ROM driver Revision: 3.20 [ 26.524897] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 26.610243] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 26.610253] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18 [ 26.614396] eth0: VIA Rhine II at 0xee001000, 00:11:5b:9e:e8:f5, IRQ 18. [ 26.615104] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1. [ 28.196911] usb 1-2: USB disconnect, address 2 [ 28.476420] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 28.663152] usb 1-2: configuration #1 chosen from 1 choice [ 28.945627] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 31.054461] Attempting manual resume [ 31.054465] swsusp: Resume From Partition 254:1 [ 31.054467] PM: Checking swsusp image. [ 31.054727] PM: Resume from disk failed. [ 31.102143] kjournald starting. Commit interval 5 seconds [ 31.102156] EXT3-fs: mounted filesystem with ordered data mode. [ 34.057008] usb 2-1: device descriptor read/64, error -71 [ 36.937130] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 37.710973] input: Power Button (FF) as /devices/virtual/input/input3 [ 37.761240] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.780761] ACPI: Power Button (FF) [PWRF] [ 37.780826] input: Power Button (CM) as /devices/virtual/input/input4 [ 37.811721] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.840655] ACPI: Power Button (CM) [PWRB] [ 37.876837] Linux agpgart interface v0.102 [ 37.961513] parport_pc 00:0a: reported by Plug and Play ACPI [ 37.961580] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 38.170111] agpgart: Detected AGP bridge 0 [ 38.174406] agpgart: AGP aperture is 128M @ 0xe0000000 [ 38.640908] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 39.278214] usb 2-1: device descriptor read/64, error -71 [ 39.507904] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 40.739452] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 40.739462] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19 [ 40.739605] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 41.098144] NET: Registered protocol family 10 [ 41.098370] lo: Disabled Privacy Extensions [ 44.619057] usb 2-1: device descriptor read/64, error -71 [ 49.839993] usb 2-1: device descriptor read/64, error -71 [ 50.069593] usb 2-1: new full speed USB device using uhci_hcd and address 5 [ 52.046160] eth0: no IPv6 routers present [ 55.082331] usb 2-1: device descriptor read/8, error -110 [ 55.222073] usb 2-1: device descriptor read/8, error -71 [ 55.450251] usb 2-1: new full speed USB device using uhci_hcd and address 6 [ 60.463392] usb 2-1: device descriptor read/8, error -110 [ 60.603134] usb 2-1: device descriptor read/8, error -71 [ 60.990633] usb 2-2: new full speed USB device using uhci_hcd and address 7 [ 61.178188] usb 2-2: configuration #1 chosen from 1 choice [ 61.186242] usbcore: registered new interface driver usbserial [ 61.186268] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 61.186301] usbcore: registered new interface driver usbserial_generic [ 61.186303] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 61.220316] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device [ 61.220350] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected [ 61.220378] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c: Detected FT8U232AM [ 61.220522] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 61.220537] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected [ 61.220555] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c: Detected FT8U232AM [ 61.220603] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB1 [ 61.220612] usbcore: registered new interface driver ftdi_sio [ 61.220615] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver [ 61.853519] lp0: using parport0 (interrupt-driven). [ 62.409128] EXT3 FS on dm-0, internal journal [ 63.088304] kjournald starting. Commit interval 5 seconds [ 63.088453] EXT3 FS on sda1, internal journal [ 63.088458] EXT3-fs: mounted filesystem with ordered data mode. [ 63.153243] Adding 2908152k swap on /dev/mapper/rolly--dmz-swap_1. Priority:-1 extents:1 across:2908152k [ 63.719204] ip_tables: (C) 2000-2006 Netfilter Core Team