[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.13.0-40-generic (buildd@bos02-arm64-070) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #45-Ubuntu SMP Tue Mar 29 14:51:33 UTC 2022 (Ubuntu 5.13.0-40.45-generic 5.13.19) [ 0.000000] Machine model: Beelink GT-King Pro [ 0.000000] efi: UEFI not found. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000de000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f4806fff] [ 0.000000] NUMA: NODE_DATA [mem 0xf40030c0-0xf4007fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000f4806fff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000f4806fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4806fff] [ 0.000000] On node 0 totalpages: 1001479 [ 0.000000] DMA zone: 15649 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1001479 pages, LIFO batch:63 [ 0.000000] On node 0, zone DMA: 505 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 34 pages/cpu s99032 r8192 d32040 u139264 [ 0.000000] pcpu-alloc: s99032 r8192 d32040 u139264 alloc=34*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 985830 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=LABEL=ROOT_UBNTU rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 audit=0 [ 0.000000] audit: disabled (until reboot) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 3546180K/4005916K available (16000K kernel code, 3658K rwdata, 13496K rodata, 7808K init, 1153K bss, 197592K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x30/0x350 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 53124 entries in 208 pages [ 0.000000] ftrace: allocated 208 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000409] Console: colour dummy device 80x25 [ 0.000774] printk: console [tty0] enabled [ 0.000891] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000915] pid_max: default: 32768 minimum: 301 [ 0.001030] LSM: Security Framework initializing [ 0.001065] Yama: becoming mindful. [ 0.001166] AppArmor: AppArmor initialized [ 0.001286] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001318] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.003633] rcu: Hierarchical SRCU implementation. [ 0.009112] EFI services will not be available. [ 0.009898] smp: Bringing up secondary CPUs ... [ 0.010751] Detected VIPT I-cache on CPU1 [ 0.010822] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.012302] CPU features: detected: Spectre-v2 [ 0.012315] CPU features: detected: Spectre-v4 [ 0.012319] CPU features: detected: Spectre-BHB [ 0.012324] CPU features: detected: ARM erratum 858921 [ 0.012329] Detected VIPT I-cache on CPU2 [ 0.012357] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.012376] arch_timer: CPU2: Trapping CNTVCT access [ 0.012388] CPU2: Booted secondary processor 0x0000000100 [0x410fd092] [ 0.013263] Detected VIPT I-cache on CPU3 [ 0.013282] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.013290] arch_timer: CPU3: Trapping CNTVCT access [ 0.013297] CPU3: Booted secondary processor 0x0000000101 [0x410fd092] [ 0.014145] Detected VIPT I-cache on CPU4 [ 0.014165] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.014173] arch_timer: CPU4: Trapping CNTVCT access [ 0.014180] CPU4: Booted secondary processor 0x0000000102 [0x410fd092] [ 0.015028] Detected VIPT I-cache on CPU5 [ 0.015047] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.015055] arch_timer: CPU5: Trapping CNTVCT access [ 0.015062] CPU5: Booted secondary processor 0x0000000103 [0x410fd092] [ 0.015159] smp: Brought up 1 node, 6 CPUs [ 0.015320] SMP: Total of 6 processors activated. [ 0.015332] CPU features: detected: 32-bit EL0 Support [ 0.015341] CPU features: detected: 32-bit EL1 Support [ 0.015353] CPU features: detected: CRC32 instructions [ 0.015471] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.031856] CPU: All CPU(s) started at EL2 [ 0.031967] alternatives: patching kernel code [ 0.034577] devtmpfs: initialized [ 0.042493] Registered cp15_barrier emulation handler [ 0.042528] Registered setend emulation handler [ 0.042541] KASLR disabled due to lack of seed [ 0.042702] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.042750] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.047932] pinctrl core: initialized pinctrl subsystem [ 0.048460] DMI not present or invalid. [ 0.048797] NET: Registered protocol family 16 [ 0.054977] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.055532] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.056220] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.057372] thermal_sys: Registered thermal governor 'fair_share' [ 0.057378] thermal_sys: Registered thermal governor 'bang_bang' [ 0.057390] thermal_sys: Registered thermal governor 'step_wise' [ 0.057399] thermal_sys: Registered thermal governor 'user_space' [ 0.057407] thermal_sys: Registered thermal governor 'power_allocator' [ 0.057679] cpuidle: using governor ladder [ 0.057709] cpuidle: using governor menu [ 0.057903] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.058031] ASID allocator initialised with 65536 entries [ 0.059191] Serial: AMBA PL011 UART driver [ 0.071457] platform ff900000.vpu: Fixing up cyclic dependency with ff600000.hdmi-tx [ 0.078468] platform cvbs-connector: Fixing up cyclic dependency with ff900000.vpu [ 0.078683] platform hdmi-connector: Fixing up cyclic dependency with ff600000.hdmi-tx [ 0.084500] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.084527] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.084538] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.084547] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.088842] fbcon: Taking over console [ 0.088878] ACPI: Interpreter disabled. [ 0.089877] iommu: Default domain type: Translated [ 0.090582] SCSI subsystem initialized [ 0.090689] libata version 3.00 loaded. [ 0.090827] vgaarb: loaded [ 0.090942] usbcore: registered new interface driver usbfs [ 0.090975] usbcore: registered new interface driver hub [ 0.091005] usbcore: registered new device driver usb [ 0.091234] pps_core: LinuxPPS API ver. 1 registered [ 0.091244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.091262] PTP clock support registered [ 0.091401] EDAC MC: Ver: 3.0.0 [ 0.092779] NetLabel: Initializing [ 0.092791] NetLabel: domain hash size = 128 [ 0.092799] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.092847] NetLabel: unlabeled traffic allowed by default [ 0.093371] clocksource: Switched to clocksource arch_sys_counter [ 0.126984] VFS: Disk quotas dquot_6.6.0 [ 0.127048] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.127463] AppArmor: AppArmor Filesystem Enabled [ 0.128103] pnp: PnP ACPI: disabled [ 0.132873] NET: Registered protocol family 2 [ 0.133050] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.135167] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.135261] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.135509] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.135691] TCP: Hash tables configured (established 32768 bind 32768) [ 0.135873] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.135960] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.136015] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.136162] NET: Registered protocol family 1 [ 0.136186] NET: Registered protocol family 44 [ 0.136200] PCI: CLS 0 bytes, default 64 [ 0.136397] Trying to unpack rootfs image as initramfs... [ 0.148698] kvm [1]: IPA Size Limit: 40 bits [ 0.151730] kvm [1]: vgic interrupt IRQ9 [ 0.151910] kvm: pmu event creation failed -2 [ 0.151952] kvm [1]: Hyp mode initialized successfully [ 0.152967] Initialise system trusted keyrings [ 0.153012] Key type blacklist registered [ 0.153166] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 0.156624] zbud: loaded [ 0.157696] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.158237] fuse: init (API version 7.34) [ 0.158659] integrity: Platform Keyring initialized [ 0.187169] Key type asymmetric registered [ 0.187198] Asymmetric key parser 'x509' registered [ 0.187246] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.187380] io scheduler mq-deadline registered [ 0.197677] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.213958] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected [ 0.216671] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.222810] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart [ 1.229688] printk: console [ttyAML0] enabled [ 1.234611] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 28, base_baud = 1500000) is a meson_uart [ 1.243472] serial serial0: tty port ttyAML6 registered [ 1.249099] msm_serial: driver initialized [ 1.413463] loop: module loaded [ 1.414326] SPI driver altr_a10sr has no spi_device_id for altr,a10sr [ 1.418941] tun: Universal TUN/TAP device driver, 1.6 [ 1.423570] PPP generic driver version 2.4.2 [ 1.427247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.433117] ehci-pci: EHCI PCI platform driver [ 1.437549] ehci-orion: EHCI orion driver [ 1.441711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.447590] ohci-pci: OHCI PCI platform driver [ 1.452044] uhci_hcd: USB Universal Host Controller Interface driver [ 1.458640] mousedev: PS/2 mouse device common for all mice [ 1.464661] i2c /dev entries driver [ 1.468907] device-mapper: uevent: version 1.0.3 [ 1.472075] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 1.482030] ledtrig-cpu: registered to indicate activity on CPUs [ 1.486664] meson-sm: secure-monitor enabled [ 1.492949] drop_monitor: Initializing network drop monitor service [ 1.497086] NET: Registered protocol family 10 [ 2.022312] Freeing initrd memory: 40732K [ 2.040081] Segment Routing with IPv6 [ 2.040191] NET: Registered protocol family 17 [ 2.042693] Key type dns_resolver registered [ 2.047588] registered taskstats version 1 [ 2.050877] Loading compiled-in X.509 certificates [ 2.058587] Loaded X.509 cert 'Build time autogenerated kernel key: fff12b99e6307a3301df2d980accd5acd52d162a' [ 2.068026] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 2.077660] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 2.084979] blacklist: Loading compiled-in revocation X.509 certificates [ 2.091686] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 2.101927] zswap: loaded using pool lzo/zbud [ 2.106103] Key type ._fscrypt registered [ 2.109648] Key type .fscrypt registered [ 2.113522] Key type fscrypt-provisioning registered [ 2.127241] Key type encrypted registered [ 2.127292] AppArmor: AppArmor sha1 policy hashing enabled [ 2.131107] ima: No TPM chip found, activating TPM-bypass! [ 2.136526] Loading compiled-in module X.509 certificates [ 2.144576] Loaded X.509 cert 'Build time autogenerated kernel key: fff12b99e6307a3301df2d980accd5acd52d162a' [ 2.151694] ima: Allocated hash algorithm: sha1 [ 2.156200] ima: No architecture policies found [ 2.160689] evm: Initialising EVM extended attributes: [ 2.165747] evm: security.selinux [ 2.169019] evm: security.SMACK64 [ 2.172301] evm: security.SMACK64EXEC [ 2.175922] evm: security.SMACK64TRANSMUTE [ 2.179977] evm: security.SMACK64MMAP [ 2.183598] evm: security.apparmor [ 2.186963] evm: security.ima [ 2.189895] evm: security.capability [ 2.193431] evm: HMAC attrs: 0x1 [ 2.209424] simple-framebuffer f4807000.framebuffer: framebuffer at 0xf4807000, 0x7e9000 bytes [ 2.212407] simple-framebuffer f4807000.framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=7680 [ 2.222365] Console: switching to colour frame buffer device 240x67 [ 2.247256] simple-framebuffer f4807000.framebuffer: fb0: simplefb registered! [ 2.269113] Freeing unused kernel memory: 7808K [ 2.323517] Checked W+X mappings: passed, no W+X pages found [ 2.323669] Run /init as init process [ 2.327277] with arguments: [ 2.327282] /init [ 2.327286] with environment: [ 2.327289] HOME=/ [ 2.327292] TERM=linux [ 2.697752] VCC_5V: supplied by 12V [ 2.698113] USB1_POW: supplied by VCC_5V [ 2.699942] USB_PWR_EN: supplied by VCC_5V [ 2.700854] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0 [ 2.703844] VDDAO_3V3: supplied by 12V [ 2.716560] VDDAO_1V8: supplied by VDDAO_3V3 [ 2.717592] meson-gx-mmc ffe05000.sd: Got CD GPIO [ 2.727500] VCC_3V3: supplied by VDDAO_3V3 [ 2.733864] FLASH_1V8: supplied by VCC_3V3 [ 2.738494] VCC_1V8: supplied by VCC_3V3 [ 2.740694] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq [ 2.772308] meson-vrtc ff8000a8.rtc: registered as rtc1 [ 2.772828] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2 [ 2.777225] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1 [ 2.786038] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator [ 2.789696] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator [ 2.795740] mmc0: new high speed SDHC card at address 0001 [ 2.796728] dwc2 ff400000.usb: Controller does not support host mode. [ 2.808878] dwc2: probe of ff400000.usb failed with error -22 [ 2.809291] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 2.823253] mmcblk0: p1 p2 p3 [ 2.824192] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found [ 2.828084] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found [ 2.834371] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock [ 2.844360] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 2.848119] meson8b-dwmac ff3f0000.ethernet: DWMAC1000 [ 2.852354] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported [ 2.859753] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported [ 2.867152] meson8b-dwmac ff3f0000.ethernet: COE Type 2 [ 2.872324] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported [ 2.879309] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported [ 2.886514] meson8b-dwmac ff3f0000.ethernet: Normal descriptors [ 2.891576] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled [ 2.897351] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.925113] mmc1: new high speed MMC card at address 0001 [ 2.927739] mmcblk1: mmc1:0001 SLD64G 57.6 GiB [ 2.932205] rtc-pcf8563 0-0051: registered as rtc0 [ 2.933229] mmcblk1boot0: mmc1:0001 SLD64G 4.00 MiB [ 2.938374] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.942082] rtc-pcf8563 0-0051: setting system clock to 2022-04-28T07:18:16 UTC (1651130296) [ 2.943307] mmcblk1boot1: mmc1:0001 SLD64G 4.00 MiB [ 2.947033] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 2.956141] mmcblk1rpmb: mmc1:0001 SLD64G 4.00 MiB, chardev (237:0) [ 2.960883] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010 [ 2.983294] xhci-hcd xhci-hcd.1.auto: irq 37, io mem 0xff500000 [ 2.989532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 2.997273] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.004427] usb usb1: Product: xHCI Host Controller [ 3.009260] usb usb1: Manufacturer: Linux 5.13.0-40-generic xhci-hcd [ 3.015553] usb usb1: SerialNumber: xhci-hcd.1.auto [ 3.017413] random: fast init done [ 3.020836] hub 1-0:1.0: USB hub found [ 3.028761] hub 1-0:1.0: 2 ports detected [ 3.032272] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.036868] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 3.044472] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.050992] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.059044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 3.067137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.074292] usb usb2: Product: xHCI Host Controller [ 3.079119] usb usb2: Manufacturer: Linux 5.13.0-40-generic xhci-hcd [ 3.085426] usb usb2: SerialNumber: xhci-hcd.1.auto [ 3.090663] hub 2-0:1.0: USB hub found [ 3.093986] hub 2-0:1.0: 1 port detected [ 3.405148] EXT4-fs (mmcblk0p3): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none. [ 3.701390] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 3.863822] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04 [ 3.872152] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.879424] usb 1-1: Product: 4-Port USB 2.0 Hub [ 3.885148] usb 1-1: Manufacturer: Generic [ 3.947318] hub 1-1:1.0: USB hub found [ 3.953776] hub 1-1:1.0: 4 ports detected [ 4.011066] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 4.047382] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.04 [ 4.055725] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.062979] usb 2-1: Product: 4-Port USB 3.0 Hub [ 4.068689] usb 2-1: Manufacturer: Generic [ 4.109469] hub 2-1:1.0: USB hub found [ 4.116148] hub 2-1:1.0: 4 ports detected [ 4.305397] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd [ 4.411874] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54 [ 4.420546] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.428133] usb 1-1.1: Product: USB2.1 Hub [ 4.434065] usb 1-1.1: Manufacturer: GenesysLogic [ 4.491036] usb 2-1.1: new SuperSpeed USB device number 3 using xhci-hcd [ 4.491363] hub 1-1.1:1.0: USB hub found [ 4.491623] hub 1-1.1:1.0: 4 ports detected [ 4.516272] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54 [ 4.516288] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.516294] usb 2-1.1: Product: USB3.1 Hub [ 4.516298] usb 2-1.1: Manufacturer: GenesysLogic [ 4.539492] hub 2-1.1:1.0: USB hub found [ 4.545411] hub 2-1.1:1.0: 4 ports detected [ 4.801395] usb 1-1.1.1: new low-speed USB device number 4 using xhci-hcd [ 4.940881] usb 1-1.1.1: New USB device found, idVendor=13ba, idProduct=0018, bcdDevice= 0.01 [ 4.948847] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.956248] usb 1-1.1.1: Product: Barcode Reader [ 5.141395] usb 1-1.1.4: new low-speed USB device number 5 using xhci-hcd [ 5.273710] usb 1-1.1.4: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 [ 5.281783] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.289197] usb 1-1.1.4: Product: Optical USB Mouse [ 5.294021] usb 1-1.1.4: Manufacturer: Logitech [ 6.038231] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 6.080955] lp: driver loaded but no devices found [ 6.108642] ppdev: user-space parallel port driver [ 6.132578] IPMI message handler: version 39.2 [ 6.143624] ipmi device interface [ 6.230744] systemd-journald[291]: Received client request to flush runtime journal. [ 6.253478] Adding 411324k swap on /swapfile. Priority:-2 extents:2 across:419516k SSFS [ 6.411846] loop0: detected capacity change from 0 to 8 [ 6.438456] loop1: detected capacity change from 0 to 100296 [ 6.462185] loop2: detected capacity change from 0 to 100312 [ 6.501966] loop3: detected capacity change from 0 to 117656 [ 6.517749] loop4: detected capacity change from 0 to 117672 [ 6.518147] loop5: detected capacity change from 0 to 467720 [ 6.541953] loop6: detected capacity change from 0 to 404624 [ 6.546193] loop7: detected capacity change from 0 to 468792 [ 6.641925] loop8: detected capacity change from 0 to 133320 [ 6.721909] loop9: detected capacity change from 0 to 98864 [ 6.801801] loop10: detected capacity change from 0 to 77328 [ 6.853869] loop11: detected capacity change from 0 to 79224 [ 6.933613] loop12: detected capacity change from 0 to 133552 [ 7.029968] loop13: detected capacity change from 0 to 404624 [ 7.106305] loop14: detected capacity change from 0 to 107600 [ 7.576793] panfrost ffe40000.gpu: clock rate = 24000000 [ 7.576890] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 7.606415] VDDCPU_B: supplied by 12V [ 7.609451] panfrost ffe40000.gpu: mali-g52 id 0x7212 major 0x0 minor 0x0 status 0x0 [ 7.609474] panfrost ffe40000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400 [ 7.609483] panfrost ffe40000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 7.609493] panfrost ffe40000.gpu: shader_present=0x3 l2_present=0x1 [ 7.611227] VDDCPU_A: supplied by 12V [ 7.621786] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 999999 KHz, changing to: 1000000 KHz [ 7.624261] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq [ 7.643077] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 0 [ 7.647960] mc: Linux media interface: v0.10 [ 7.652216] Registered IR keymap rc-empty [ 7.652285] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0 [ 7.653866] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 7.653958] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input1 [ 7.654220] meson-ir ff808000.ir: receiver initialized [ 7.686358] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 7.688487] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.690767] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.694696] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 7.699453] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 7.736209] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present! [ 7.742093] videodev: Linux video capture interface: v2.00 [ 7.745865] Registered IR keymap rc-cec [ 7.746025] rc rc1: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc1 [ 7.746149] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc1/input2 [ 7.783801] mmc2: new high speed SDIO card at address 0001 [ 7.852415] meson-drm ff900000.vpu: Queued 3 outputs on vpu [ 7.911397] checking generic (f4807000 7e9000) vs hw (0 ffffffffffffffff) [ 7.911410] fb0: switching to meson-drm-fb from simple [ 7.911645] Console: switching to colour dummy device 80x25 [ 7.941424] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 7.941822] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 7.942280] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi]) [ 7.942587] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 1 [ 8.060625] [drm] kms: can't enable cloning when we probably wanted to. [ 8.134229] cryptd: max_cpu_qlen set to 1000 [ 8.163595] Bluetooth: Core ver 2.22 [ 8.163691] NET: Registered protocol family 31 [ 8.163694] Bluetooth: HCI device and connection manager initialized [ 8.163709] Bluetooth: HCI socket layer initialized [ 8.163715] Bluetooth: L2CAP socket layer initialized [ 8.163728] Bluetooth: SCO socket layer initialized [ 8.246305] Console: switching to colour frame buffer device 240x67 [ 8.273001] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device [ 8.280335] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.514011] hid: raw HID events driver (C) Jiri Kosina [ 8.584586] Bluetooth: HCI UART driver ver 2.3 [ 8.584605] Bluetooth: HCI UART protocol H4 registered [ 8.584609] Bluetooth: HCI UART protocol BCSP registered [ 8.584696] Bluetooth: HCI UART protocol LL registered [ 8.584702] Bluetooth: HCI UART protocol ATH3K registered [ 8.584730] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.584999] Bluetooth: HCI UART protocol Intel registered [ 8.585164] Bluetooth: HCI UART protocol Broadcom registered [ 8.585191] Bluetooth: HCI UART protocol QCA registered [ 8.585195] Bluetooth: HCI UART protocol AG6XX registered [ 8.585222] Bluetooth: HCI UART protocol Marvell registered [ 8.585437] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 8.585638] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 8.658354] Registered IR keymap rc-cec [ 8.658966] rc rc2: dw_hdmi as /devices/platform/soc/ff600000.bus/ff600000.hdmi-tx/rc/rc2 [ 8.659690] input: dw_hdmi as /devices/platform/soc/ff600000.bus/ff600000.hdmi-tx/rc/rc2/input3 [ 8.751038] usbcore: registered new interface driver usbhid [ 8.751050] usbhid: USB HID core driver [ 8.830782] input: Barcode Reader as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:13BA:0018.0001/input/input4 [ 8.889840] hid-generic 0003:13BA:0018.0001: input,hidraw0: USB HID v1.10 Keyboard [Barcode Reader ] on usb-xhci-hcd.1.auto-1.1.1/input0 [ 8.890440] input: Barcode Reader Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:13BA:0018.0002/input/input5 [ 8.890641] input: Barcode Reader System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:13BA:0018.0002/input/input6 [ 8.949665] input: Barcode Reader Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:13BA:0018.0002/input/input7 [ 8.949824] hid-generic 0003:13BA:0018.0002: input,hidraw1: USB HID v1.10 Mouse [Barcode Reader ] on usb-xhci-hcd.1.auto-1.1.1/input1 [ 8.950194] input: Logitech Optical USB Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:046D:C016.0003/input/input8 [ 8.950386] hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-xhci-hcd.1.auto-1.1.4/input0 [ 8.973897] Bluetooth: hci0: BCM: chip id 101 [ 8.974140] Bluetooth: hci0: BCM: features 0x2f [ 8.975594] Bluetooth: hci0: BCM4354A2 [ 8.975604] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000 [ 9.473203] Bluetooth: hci0: BCM4356A2 'brcm/BCM4356A2.hcd' Patch [ 9.481107] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.481856] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.689603] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [ 9.692861] usbcore: registered new interface driver brcmfmac [ 9.753431] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.azw,gtking.txt failed with error -2 [ 9.912061] random: crng init done [ 9.987889] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [ 10.033849] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Apr 9 2021 00:40:07 version 7.35.349.104 (775a9ab CY) FWID 01-64b609e0 [ 10.351717] Bluetooth: hci0: BCM4356 37.4MHz AMPAK AP6356-0055 [ 10.351785] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266 [ 18.268809] [drm] kms: can't enable cloning when we probably wanted to. [ 31.184704] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 35.981427] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=38) [ 35.983613] meson8b-dwmac ff3f0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 35.984686] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found [ 35.984698] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW [ 35.985056] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode [ 38.781383] rc rc0: two consecutive events of type space [ 38.897567] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 39.793387] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 39.793419] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.437768] loop15: detected capacity change from 0 to 8 [ 53.636972] rfkill: input handler disabled