[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2018-05-08 [ 0.000000] Linux version 4.15.0-122-generic (buildd@lgw01-amd64-036) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #124-Ubuntu SMP Thu Oct 15 13:03:05 UTC 2020 (Ubuntu 4.15.0-122.124-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-122-generic root=UUID=40bc6c96-8d51-4918-91cd-c5facb920fdc ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P6X58D PREMIUM, BIOS 1501 05/10/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask E00000000 write-back [ 0.000000] 2 base 600000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 24568M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x2f317000-0x33982fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB9E0 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000BF780100 00006C (v01 051011 XSDT1028 20110510 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BF780290 0000F4 (v03 051011 FACP1028 20110510 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000BF7804B0 00B384 (v01 A1382 A1382001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000BF798000 000040 [ 0.000000] ACPI: FACS 0x00000000BF798000 000040 [ 0.000000] ACPI: APIC 0x00000000BF780390 0000D8 (v01 051011 APIC1028 20110510 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BF780470 00003C (v01 051011 OEMMCFG 20110510 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BF798040 000072 (v01 051011 OEMB1028 20110510 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 051011 OEMHPET 20110510 MSFT 00000097) [ 0.000000] ACPI: DMAR 0x00000000BF7980C0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 0x00000000BF798570 000034 (v06 051011 PerfTune 20110510 MSFT 00000097) [ 0.000000] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 051011 OEMOSFR 20110510 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BF79C710 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x63ffd5000-0x63fffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf77ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000063fffffff] [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000063fffffff] [ 0.000000] On node 0 totalpages: 6289180 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12190 pages used for memmap [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31 [ 0.000000] Normal zone: 86016 pages used for memmap [ 0.000000] Normal zone: 5505024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x500 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6190889 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-122-generic root=UUID=40bc6c96-8d51-4918-91cd-c5facb920fdc ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 24593944K/25156720K available (12300K kernel code, 2482K rwdata, 4272K rodata, 2436K init, 2724K bss, 562776K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39402 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR-IR: This system BIOS has enabled interrupt remapping on a chipset that contains an erratum making that feature unstable. To maintain system stability interrupt remapping is being disabled. Please contact your BIOS vendor for an update [ 0.000000] Switched APIC routing to physical flat. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3341.124 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6682.24 BogoMIPS (lpj=13364496) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.030667] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.033496] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.033603] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.033692] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.033913] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.033914] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.033927] CPU0: Thermal monitoring enabled (TM1) [ 0.033940] process: using mwait in idle threads [ 0.033943] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.033943] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.033945] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.033946] Spectre V2 : Mitigation: Full generic retpoline [ 0.033947] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.033947] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.033955] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.033955] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.033956] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.033980] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.039517] Freeing SMP alternatives memory: 36K [ 0.153542] smpboot: CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz (family: 0x6, model: 0x2c, stepping: 0x2) [ 0.153633] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. [ 0.153649] core: CPUID marked event: 'bus cycles' unavailable [ 0.153651] ... version: 3 [ 0.153651] ... bit width: 48 [ 0.153652] ... generic registers: 4 [ 0.153652] ... value mask: 0000ffffffffffff [ 0.153653] ... max period: 000000007fffffff [ 0.153653] ... fixed-purpose events: 3 [ 0.153654] ... event mask: 000000070000000f [ 0.153697] Hierarchical SRCU implementation. [ 0.155348] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.155366] smp: Bringing up secondary CPUs ... [ 0.155466] x86: Booting SMP configuration: [ 0.155467] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 [ 0.172143] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.172238] #7 #8 #9 #10 #11 [ 0.186528] smp: Brought up 1 node, 12 CPUs [ 0.186528] smpboot: Max logical packages: 2 [ 0.186528] smpboot: Total of 12 processors activated (80186.97 BogoMIPS) [ 0.192267] devtmpfs: initialized [ 0.192267] x86/mm: Memory block size: 128MB [ 0.193642] evm: security.selinux [ 0.193643] evm: security.SMACK64 [ 0.193643] evm: security.SMACK64EXEC [ 0.193643] evm: security.SMACK64TRANSMUTE [ 0.193644] evm: security.SMACK64MMAP [ 0.193644] evm: security.apparmor [ 0.193644] evm: security.ima [ 0.193645] evm: security.capability [ 0.193660] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes) [ 0.193660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.193660] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.193660] pinctrl core: initialized pinctrl subsystem [ 0.193660] RTC time: 21:00:46, date: 10/27/20 [ 0.193660] NET: Registered protocol family 16 [ 0.193660] audit: initializing netlink subsys (disabled) [ 0.193660] audit: type=2000 audit(1603832445.192:1): state=initialized audit_enabled=0 res=1 [ 0.193660] cpuidle: using governor ladder [ 0.193660] cpuidle: using governor menu [ 0.193660] ACPI: bus type PCI registered [ 0.193660] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.193660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.193660] PCI: not using MMCONFIG [ 0.193660] PCI: Using configuration type 1 for base access [ 0.196030] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.196030] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.196088] ACPI: Added _OSI(Module Device) [ 0.196089] ACPI: Added _OSI(Processor Device) [ 0.196089] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.196090] ACPI: Added _OSI(Processor Aggregator Device) [ 0.196091] ACPI: Added _OSI(Linux-Dell-Video) [ 0.196091] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.196092] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.196279] ACPI: Executed 1 blocks of module-level executable AML code [ 0.243536] ACPI: Dynamic OEM Table Load: [ 0.243549] ACPI: SSDT 0xFFFF8FC3A2C5C000 003978 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.244400] ACPI: Dynamic OEM Table Load: [ 0.244404] ACPI: SSDT 0xFFFF8FC3A3240000 0007DD (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.245127] ACPI: Interpreter enabled [ 0.245146] ACPI: (supports S0 S1 S3 S4 S5) [ 0.245147] ACPI: Using IOAPIC for interrupt routing [ 0.245180] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.246438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.246456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246684] ACPI: GPE 0x17 active on init [ 0.246706] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.247093] ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch [ 0.254875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.254879] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.254883] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.255204] PCI host bridge to bus 0000:00 [ 0.255206] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.255207] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.255208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.255209] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.255209] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 0.255210] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 0.255212] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.255221] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.255247] pci 0000:00:00.0: enabling Extended Tags [ 0.255276] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.255359] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.255386] pci 0000:00:01.0: enabling Extended Tags [ 0.255416] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.255502] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.255527] pci 0000:00:02.0: enabling Extended Tags [ 0.255556] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.255639] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.255665] pci 0000:00:03.0: enabling Extended Tags [ 0.255696] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.255780] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.255804] pci 0000:00:07.0: enabling Extended Tags [ 0.255834] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.255922] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.256038] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.256148] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.256254] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 0.256353] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.256391] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f] [ 0.256496] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.256533] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f] [ 0.256636] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.256674] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f] [ 0.256784] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.256802] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff] [ 0.256875] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.256954] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.256972] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit] [ 0.257036] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.257119] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.257188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.257278] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.257348] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.257432] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.257470] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f] [ 0.257576] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.257613] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f] [ 0.257717] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.257755] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f] [ 0.257867] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.257886] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff] [ 0.257958] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.258035] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.258156] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.258229] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.258232] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.258235] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.258333] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.258348] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07] [ 0.258354] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883] [ 0.258360] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807] [ 0.258366] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483] [ 0.258372] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f] [ 0.258378] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff] [ 0.258413] pci 0000:00:1f.2: PME# supported from D3hot [ 0.258487] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.258502] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit] [ 0.258519] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f] [ 0.258634] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601 [ 0.258648] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07] [ 0.258653] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883] [ 0.258659] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807] [ 0.258665] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483] [ 0.258671] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f] [ 0.258677] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff800-0xf9efffff] [ 0.258683] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref] [ 0.258692] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1 [ 0.258717] pci 0000:01:00.0: PME# supported from D3hot [ 0.268017] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.268021] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.268024] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.268088] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.268109] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit] [ 0.268189] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.280019] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.280025] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.280083] pci 0000:03:00.0: [10de:1f07] type 00 class 0x030000 [ 0.280102] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.280111] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.280120] pci 0000:03:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit pref] [ 0.280127] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.280133] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref] [ 0.280179] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.280240] pci 0000:03:00.1: [10de:10f9] type 00 class 0x040300 [ 0.280254] pci 0000:03:00.1: reg 0x10: [mem 0xfbcf8000-0xfbcfbfff] [ 0.280351] pci 0000:03:00.2: [10de:1ada] type 00 class 0x0c0330 [ 0.280368] pci 0000:03:00.2: reg 0x10: [mem 0xdffc0000-0xdfffffff 64bit pref] [ 0.280382] pci 0000:03:00.2: reg 0x1c: [mem 0xdffb0000-0xdffbffff 64bit pref] [ 0.280427] pci 0000:03:00.2: PME# supported from D0 D3hot [ 0.280465] pci 0000:03:00.3: [10de:1adb] type 00 class 0x0c8000 [ 0.280478] pci 0000:03:00.3: reg 0x10: [mem 0xfbcff000-0xfbcfffff] [ 0.280543] pci 0000:03:00.3: PME# supported from D0 D3hot [ 0.292029] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.292033] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.292037] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff] [ 0.292041] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.292084] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.292120] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.292127] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.292172] pci 0000:05:00.0: [11ab:4364] type 00 class 0x020000 [ 0.292201] pci 0000:05:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.292211] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd8ff] [ 0.292249] pci 0000:05:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref] [ 0.292312] pci 0000:05:00.0: supports D1 D2 [ 0.292313] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.304022] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.304026] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.304030] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.304083] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010 [ 0.304101] pci 0000:07:02.0: reg 0x10: [mem 0xfbeff000-0xfbeff7ff] [ 0.304109] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f] [ 0.304172] pci 0000:07:02.0: supports D2 [ 0.304173] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold [ 0.304229] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.304232] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.304234] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.304238] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.304239] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.304240] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.304241] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.304242] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 0.304243] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode) [ 0.304870] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.304932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.304993] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.305054] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.305115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.305175] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.305236] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.305297] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.305542] SCSI subsystem initialized [ 0.305557] libata version 3.00 loaded. [ 0.305557] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.305557] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.305557] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.305557] vgaarb: loaded [ 0.305557] ACPI: bus type USB registered [ 0.305557] usbcore: registered new interface driver usbfs [ 0.305557] usbcore: registered new interface driver hub [ 0.305557] usbcore: registered new device driver usb [ 0.305557] EDAC MC: Ver: 3.0.0 [ 0.305557] PCI: Using ACPI for IRQ routing [ 0.311063] PCI: Discovered peer bus ff [ 0.311063] PCI: root bus ff: using default resources [ 0.311064] PCI: Probing PCI hardware (bus ff) [ 0.311081] PCI host bridge to bus 0000:ff [ 0.311082] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.311083] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.311084] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.311086] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.311089] pci 0000:ff:00.0: [8086:2c71] type 00 class 0x060000 [ 0.311121] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000 [ 0.311153] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000 [ 0.311181] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000 [ 0.311210] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000 [ 0.311239] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000 [ 0.311269] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000 [ 0.311297] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000 [ 0.311327] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000 [ 0.311356] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000 [ 0.311387] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000 [ 0.311415] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000 [ 0.311443] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000 [ 0.311472] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000 [ 0.311503] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000 [ 0.311531] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000 [ 0.311559] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000 [ 0.311588] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000 [ 0.311616] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000 [ 0.311644] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000 [ 0.311674] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000 [ 0.311710] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.311712] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.311716] PCI: pci_cache_line_size set to 64 bytes [ 0.311784] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.311785] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff] [ 0.311864] NetLabel: Initializing [ 0.311864] NetLabel: domain hash size = 128 [ 0.311865] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.311877] NetLabel: unlabeled traffic allowed by default [ 0.312494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.312496] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.314524] clocksource: Switched to clocksource hpet [ 0.321334] VFS: Disk quotas dquot_6.6.0 [ 0.321355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.321439] AppArmor: AppArmor Filesystem Enabled [ 0.321463] pnp: PnP ACPI init [ 0.321547] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved [ 0.321548] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.321549] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.321550] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.321551] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 0.321552] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved [ 0.321557] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.321618] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.321838] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.321842] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322099] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.322101] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.322102] system 00:03: [io 0x0500-0x057f] could not be reserved [ 0.322103] system 00:03: [io 0x0600-0x0607] has been reserved [ 0.322105] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.322106] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.322107] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.322110] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322236] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.322240] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322377] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.322378] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.322382] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322496] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.322500] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322688] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.322690] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.322691] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.322692] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.322693] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.322697] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.322839] pnp: PnP ACPI: found 8 devices [ 0.328786] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.328796] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.328797] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000 add_align 100000 [ 0.328799] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.328808] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.328811] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.328813] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.328815] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.328817] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.328819] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.328824] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.328826] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.328831] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.328833] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.328835] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff] [ 0.328837] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.328840] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.328846] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.328848] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.328851] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] [ 0.328853] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.328857] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.328859] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.328862] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.328864] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.328868] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.328870] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.328873] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.328879] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.328880] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.328881] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.328881] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.328882] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.328883] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.328884] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.328885] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.328886] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.328887] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.328888] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff] [ 0.328889] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.328890] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.328891] pci_bus 0000:06: resource 1 [mem 0xf0000000-0xf03fffff] [ 0.328892] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.328893] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.328893] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.328894] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.328895] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.328896] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.328897] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.328898] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] [ 0.328899] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.328900] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.328901] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.328901] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.328949] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.328950] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.328976] NET: Registered protocol family 2 [ 0.329158] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.329518] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.329636] TCP: Hash tables configured (established 262144 bind 65536) [ 0.329689] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.329771] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.329877] NET: Registered protocol family 1 [ 0.331485] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.331492] pci 0000:03:00.1: Linked as a consumer to 0000:03:00.0 [ 0.331493] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 0.331642] PCI: CLS 256 bytes, default 64 [ 0.331671] Unpacking initramfs... [ 1.109190] Freeing initrd memory: 72112K [ 1.109241] DMAR: Host address width 39 [ 1.109242] DMAR: DRHD base: 0x000000fbfff000 flags: 0x0 [ 1.109256] DMAR: dmar0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a [ 1.109257] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1 [ 1.109262] DMAR: dmar1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe [ 1.109263] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff [ 1.109264] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff [ 1.109264] DMAR: ATSR flags: 0x0 [ 1.109296] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.109297] software IO TLB: mapped [mem 0xbb780000-0xbf780000] (64MB) [ 1.109605] Scanning for low memory corruption every 60 seconds [ 1.110213] Initialise system trusted keyrings [ 1.110219] Key type blacklist registered [ 1.110253] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.111160] zbud: loaded [ 1.111604] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.111718] fuse init (API version 7.26) [ 1.112822] Key type asymmetric registered [ 1.112822] Asymmetric key parser 'x509' registered [ 1.112847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.112884] io scheduler noop registered [ 1.112884] io scheduler deadline registered [ 1.112906] io scheduler cfq registered (default) [ 1.113168] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.113612] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.113612] vesafb: scrolling: redraw [ 1.113614] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.113623] vesafb: framebuffer at 0xdd000000, mapped to 0x (ptrval), using 8128k, total 8128k [ 1.113702] Console: switching to colour frame buffer device 240x67 [ 1.113743] fb0: VESA VGA frame buffer device [ 1.113753] intel_idle: MWAIT substates: 0x1120 [ 1.113754] intel_idle: v0.4.1 model 0x2C [ 1.114077] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.114150] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.114157] ACPI: Power Button [PWRB] [ 1.114184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.114205] ACPI: Power Button [PWRF] [ 1.114660] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.116209] Linux agpgart interface v0.103 [ 1.118297] loop: module loaded [ 1.118429] libphy: Fixed MDIO Bus: probed [ 1.118430] tun: Universal TUN/TAP device driver, 1.6 [ 1.118454] PPP generic driver version 2.4.2 [ 1.118483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.118486] ehci-pci: EHCI PCI platform driver [ 1.118616] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.118620] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.118629] ehci-pci 0000:00:1a.7: debug port 1 [ 1.122522] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported [ 1.122533] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000 [ 1.136083] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.136120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.136121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.136122] usb usb1: Product: EHCI Host Controller [ 1.136123] usb usb1: Manufacturer: Linux 4.15.0-122-generic ehci_hcd [ 1.136124] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.136257] hub 1-0:1.0: USB hub found [ 1.136264] hub 1-0:1.0: 6 ports detected [ 1.136489] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.136492] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.136503] ehci-pci 0000:00:1d.7: debug port 1 [ 1.140405] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported [ 1.140413] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000 [ 1.156079] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.156117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.156118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.156119] usb usb2: Product: EHCI Host Controller [ 1.156120] usb usb2: Manufacturer: Linux 4.15.0-122-generic ehci_hcd [ 1.156120] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.156206] hub 2-0:1.0: USB hub found [ 1.156213] hub 2-0:1.0: 6 ports detected [ 1.156325] ehci-platform: EHCI generic platform driver [ 1.156335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.156337] ohci-pci: OHCI PCI platform driver [ 1.156348] ohci-platform: OHCI generic platform driver [ 1.156353] uhci_hcd: USB Universal Host Controller Interface driver [ 1.156457] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.156461] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.156466] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.156487] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 1.156520] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.156521] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.156522] usb usb3: Product: UHCI Host Controller [ 1.156523] usb usb3: Manufacturer: Linux 4.15.0-122-generic uhci_hcd [ 1.156524] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.156607] hub 3-0:1.0: USB hub found [ 1.156615] hub 3-0:1.0: 2 ports detected [ 1.156791] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.156794] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.156799] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.156819] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 1.156851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.156852] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.156853] usb usb4: Product: UHCI Host Controller [ 1.156854] usb usb4: Manufacturer: Linux 4.15.0-122-generic uhci_hcd [ 1.156855] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.156938] hub 4-0:1.0: USB hub found [ 1.156945] hub 4-0:1.0: 2 ports detected [ 1.157120] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.157124] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.157128] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.157150] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00 [ 1.157184] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.157186] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.157187] usb usb5: Product: UHCI Host Controller [ 1.157187] usb usb5: Manufacturer: Linux 4.15.0-122-generic uhci_hcd [ 1.157188] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.157269] hub 5-0:1.0: USB hub found [ 1.157276] hub 5-0:1.0: 2 ports detected [ 1.157447] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.157451] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.157456] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.157471] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 1.157503] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.157504] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.157505] usb usb6: Product: UHCI Host Controller [ 1.157506] usb usb6: Manufacturer: Linux 4.15.0-122-generic uhci_hcd [ 1.157507] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.157589] hub 6-0:1.0: USB hub found [ 1.157597] hub 6-0:1.0: 2 ports detected [ 1.157763] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.157766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.157771] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.157786] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 1.157823] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.157824] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.157825] usb usb7: Product: UHCI Host Controller [ 1.157826] usb usb7: Manufacturer: Linux 4.15.0-122-generic uhci_hcd [ 1.157827] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.157909] hub 7-0:1.0: USB hub found [ 1.157916] hub 7-0:1.0: 2 ports detected [ 1.158085] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.158088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.158093] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.158109] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 1.158141] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.158142] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.158143] usb usb8: Product: UHCI Host Controller [ 1.158144] usb usb8: Manufacturer: Linux 4.15.0-122-generic uhci_hcd [ 1.158144] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.158209] hub 8-0:1.0: USB hub found [ 1.158213] hub 8-0:1.0: 2 ports detected [ 1.158345] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.158350] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.158454] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 1.158641] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.158642] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.158643] usb usb9: Product: xHCI Host Controller [ 1.158644] usb usb9: Manufacturer: Linux 4.15.0-122-generic xhci-hcd [ 1.158645] usb usb9: SerialNumber: 0000:02:00.0 [ 1.158712] hub 9-0:1.0: USB hub found [ 1.158718] hub 9-0:1.0: 2 ports detected [ 1.158784] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.158787] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 1.158789] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 1.161826] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.161840] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.161841] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.161842] usb usb10: Product: xHCI Host Controller [ 1.161843] usb usb10: Manufacturer: Linux 4.15.0-122-generic xhci-hcd [ 1.161844] usb usb10: SerialNumber: 0000:02:00.0 [ 1.161911] hub 10-0:1.0: USB hub found [ 1.161920] hub 10-0:1.0: 2 ports detected [ 1.162052] xhci_hcd 0000:03:00.2: xHCI Host Controller [ 1.162057] xhci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 11 [ 1.162665] xhci_hcd 0000:03:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010 [ 1.162762] usb usb11: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.162763] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.162764] usb usb11: Product: xHCI Host Controller [ 1.162765] usb usb11: Manufacturer: Linux 4.15.0-122-generic xhci-hcd [ 1.162765] usb usb11: SerialNumber: 0000:03:00.2 [ 1.162834] hub 11-0:1.0: USB hub found [ 1.162840] hub 11-0:1.0: 2 ports detected [ 1.162912] xhci_hcd 0000:03:00.2: xHCI Host Controller [ 1.162914] xhci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 12 [ 1.162916] xhci_hcd 0000:03:00.2: Host supports USB 3.10 Enhanced SuperSpeed [ 1.162934] usb usb12: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.162947] usb usb12: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.162949] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.162949] usb usb12: Product: xHCI Host Controller [ 1.162950] usb usb12: Manufacturer: Linux 4.15.0-122-generic xhci-hcd [ 1.162951] usb usb12: SerialNumber: 0000:03:00.2 [ 1.163014] hub 12-0:1.0: USB hub found [ 1.163021] hub 12-0:1.0: 4 ports detected [ 1.163146] i8042: PNP: No PS/2 controller found. [ 1.163147] i8042: Probing ports directly. [ 1.165729] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.165732] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.165867] mousedev: PS/2 mouse device common for all mice [ 1.166014] rtc_cmos 00:01: RTC can wake from S4 [ 1.166117] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.166139] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.166144] i2c /dev entries driver [ 1.166182] device-mapper: uevent: version 1.0.3 [ 1.166236] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.166460] ledtrig-cpu: registered to indicate activity on CPUs [ 1.166802] NET: Registered protocol family 10 [ 1.170986] Segment Routing with IPv6 [ 1.171001] NET: Registered protocol family 17 [ 1.171122] Key type dns_resolver registered [ 1.171997] mce: Using 9 MCE banks [ 1.172015] RAS: Correctable Errors collector initialized. [ 1.172053] microcode: sig=0x206c2, pf=0x2, revision=0x1f [ 1.172408] microcode: Microcode Update Driver: v2.2. [ 1.172414] sched_clock: Marking stable (1172402150, 0)->(1159355485, 13046665) [ 1.177323] registered taskstats version 1 [ 1.177332] Loading compiled-in X.509 certificates [ 1.179856] Loaded X.509 cert 'Build time autogenerated kernel key: 1ac9abf9980c816fb9cfffb58ec8b2f33f2baf04' [ 1.179874] zswap: loaded using pool lzo/zbud [ 1.187045] Key type big_key registered [ 1.187053] Key type trusted registered [ 1.188881] Key type encrypted registered [ 1.188885] AppArmor: AppArmor sha1 policy hashing enabled [ 1.188889] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.188894] ima: Allocated hash algorithm: sha1 [ 1.188913] evm: HMAC attrs: 0x1 [ 1.189325] Magic number: 8:245:46 [ 1.189836] rtc_cmos 00:01: setting system clock to 2020-10-27 21:00:47 UTC (1603832447) [ 1.198046] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.198047] EDD information not available. [ 1.542252] Freeing unused kernel image memory: 2436K [ 1.584044] Write protecting the kernel read-only data: 20480k [ 1.587523] Freeing unused kernel image memory: 2008K [ 1.588453] Freeing unused kernel image memory: 1872K [ 1.597374] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.597375] x86/mm: Checking user space page tables [ 1.605262] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.675991] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 1.683599] ahci 0000:00:1f.2: version 3.0 [ 1.683797] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.683832] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.683833] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.685451] sky2: driver version 1.30 [ 1.685523] sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3 [ 1.685707] sky2 0000:05:00.0 eth0: addr 48:5b:39:0a:2f:2c [ 1.704667] nvidia: loading out-of-tree module taints kernel. [ 1.704676] nvidia: module license 'NVIDIA' taints kernel. [ 1.704677] Disabling lock debugging due to kernel taint [ 1.711392] sky2 0000:05:00.0 enp5s0: renamed from eth0 [ 1.712703] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 1.723425] nvidia-nvlink: Nvlink Core is being initialized, major device number 242 [ 1.723919] nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 1.748584] scsi host0: ahci [ 1.748821] scsi host1: ahci [ 1.749147] scsi host2: ahci [ 1.749461] scsi host3: ahci [ 1.749781] scsi host4: ahci [ 1.749957] scsi host5: ahci [ 1.749992] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 35 [ 1.749993] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 35 [ 1.749995] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 35 [ 1.749996] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 35 [ 1.749997] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 35 [ 1.749998] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 35 [ 1.750127] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.750129] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.750132] ahci 0000:01:00.0: port 0 can do FBS, forcing FBSCP [ 1.750152] ahci 0000:01:00.0: port 1 can do FBS, forcing FBSCP [ 1.750372] scsi host6: ahci [ 1.750632] scsi host7: ahci [ 1.750680] ata7: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9eff900 irq 38 [ 1.750681] ata8: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9eff980 irq 38 [ 1.764097] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.823413] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.80.02 Wed Sep 23 01:13:39 UTC 2020 [ 1.838999] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.80.02 Wed Sep 23 00:48:09 UTC 2020 [ 1.839730] [drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver [ 1.839731] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0 [ 2.124085] usb 4-1: New USB device found, idVendor=045e, idProduct=0768 [ 2.124088] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.124090] usb 4-1: Product: Microsoft® SiderWinderTM X4 Keyboard [ 2.124092] usb 4-1: Manufacturer: Microsoft [ 2.132472] hidraw: raw HID events driver (C) Jiri Kosina [ 2.140021] tsc: Refined TSC clocksource calibration: 3340.908 MHz [ 2.140269] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30284115ef9, max_idle_ns: 440795349621 ns [ 2.149301] usbcore: registered new interface driver usbhid [ 2.149301] usbhid: USB HID core driver [ 2.153759] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:045E:0768.0001/input/input5 [ 2.212351] hid-generic 0003:045E:0768.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:1a.1-1/input0 [ 2.212663] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:045E:0768.0002/input/input6 [ 2.223983] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.224034] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [ 2.224049] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [ 2.224384] ata8.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HA, max UDMA/133 [ 2.224386] ata8.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.224784] ata8.00: configured for UDMA/133 [ 2.227029] ata1.00: ATAPI: PIONEER BD-RW BDR-205, 1.04, max UDMA/100 [ 2.229853] ata7.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133 [ 2.229856] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.230464] ata1.00: configured for UDMA/100 [ 2.235619] ata7.00: configured for UDMA/133 [ 2.240952] scsi 0:0:0:0: CD-ROM PIONEER BD-RW BDR-205 1.04 PQ: 0 ANSI: 5 [ 2.272339] hid-generic 0003:045E:0768.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:1a.1-1/input1 [ 2.332059] firewire_core 0000:07:02.0: created device fw0: GUID fedcba9876543210, S400 [ 2.334799] sr 0:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.334801] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.334911] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.334981] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.372038] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 2.812055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.813706] ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100 [ 2.815585] ata2.00: configured for UDMA/100 [ 2.818602] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5 [ 2.885559] sr 1:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.885805] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 2.885972] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.164360] clocksource: Switched to clocksource tsc [ 3.360019] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.366047] ata3.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133 [ 3.366049] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.372188] ata3.00: configured for UDMA/133 [ 3.372549] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD203WI 0002 PQ: 0 ANSI: 5 [ 3.372947] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.372957] sd 2:0:0:0: [sda] Write Protect is off [ 3.372958] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.372975] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.373050] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.410369] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 3.410376] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 3.417032] random: fast init done [ 3.424260] sda: [LDM] sda1 [ 3.424447] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.424456] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.424468] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.424563] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.848027] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.854039] ata4.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133 [ 3.854041] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.860136] ata4.00: configured for UDMA/133 [ 3.860491] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD203WI 0002 PQ: 0 ANSI: 5 [ 3.860962] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.860969] sd 3:0:0:0: [sdb] Write Protect is off [ 3.860970] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.860976] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.860980] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.896039] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 3.896045] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 3.909639] sdb: [LDM] sdb1 [ 3.909892] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.174487] ata5: SATA link down (SStatus 0 SControl 300) [ 4.487236] ata6: SATA link down (SStatus 0 SControl 300) [ 4.487660] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 00E4 PQ: 0 ANSI: 5 [ 4.488072] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 4.488482] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSA2M080 02HA PQ: 0 ANSI: 5 [ 4.488533] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.488615] sd 6:0:0:0: [sdc] Write Protect is off [ 4.488618] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.488775] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.488947] ata8.00: Enabling discard_zeroes_data [ 4.488953] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 4.489399] sd 7:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 4.489479] sd 7:0:0:0: [sdd] Write Protect is off [ 4.489482] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.489572] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.490071] ata8.00: Enabling discard_zeroes_data [ 4.490959] sdd: sdd1 sdd2 [ 4.491145] ata8.00: Enabling discard_zeroes_data [ 4.491727] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 4.501859] sdc: sdc1 sdc2 [ 4.503094] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 4.750161] usb 1-4: New USB device found, idVendor=046d, idProduct=082d [ 4.750164] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 4.750166] usb 1-4: Product: HD Pro Webcam C920 [ 4.750168] usb 1-4: SerialNumber: AA3B3E6F [ 5.012009] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 5.207073] usb 5-1: New USB device found, idVendor=046d, idProduct=c016 [ 5.207076] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.207078] usb 5-1: Product: Optical USB Mouse [ 5.207080] usb 5-1: Manufacturer: Logitech [ 5.223273] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046D:C016.0003/input/input7 [ 5.223637] hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.2-1/input0 [ 5.636004] usb 1-6: new high-speed USB device number 5 using ehci-pci [ 5.798910] usb 1-6: New USB device found, idVendor=04f9, idProduct=0042 [ 5.798913] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.798915] usb 1-6: Product: HL-2270DW series [ 5.798917] usb 1-6: Manufacturer: Brother [ 5.798918] usb 1-6: SerialNumber: K1N741735 [ 6.260033] raid6: sse2x1 gen() 8221 MB/s [ 6.308018] raid6: sse2x1 xor() 6203 MB/s [ 6.356027] raid6: sse2x2 gen() 9679 MB/s [ 6.404016] raid6: sse2x2 xor() 7241 MB/s [ 6.452019] raid6: sse2x4 gen() 10963 MB/s [ 6.500024] raid6: sse2x4 xor() 8111 MB/s [ 6.500025] raid6: using algorithm sse2x4 gen() 10963 MB/s [ 6.500025] raid6: .... xor() 8111 MB/s, rmw enabled [ 6.500026] raid6: using ssse3x2 recovery algorithm [ 6.506645] xor: measuring software checksum speed [ 6.544017] prefetch64-sse: 13675.000 MB/sec [ 6.584018] generic_sse: 12054.000 MB/sec [ 6.584019] xor: using function: prefetch64-sse (13675.000 MB/sec) [ 6.602291] Btrfs loaded, crc32c=crc32c-intel [ 6.830050] random: crng init done [ 6.830052] random: 7 urandom warning(s) missed due to ratelimiting [ 17.467290] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 19.039342] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.132691] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.152412] systemd[1]: Detected architecture x86-64. [ 19.225586] systemd[1]: Set hostname to . [ 19.707514] systemd-sysv-generator[489]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [ 22.603588] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 22.603769] systemd[1]: Created slice System Slice. [ 22.603824] systemd[1]: Listening on udev Kernel Socket. [ 22.603875] systemd[1]: Listening on LVM2 poll daemon socket. [ 22.603998] systemd[1]: Listening on Journal Socket. [ 22.604523] systemd[1]: Starting Set the console keyboard layout... [ 22.605085] systemd[1]: Starting Uncomplicated firewall... [ 22.874713] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [ 22.990935] RPC: Registered named UNIX socket transport module. [ 22.990936] RPC: Registered udp transport module. [ 22.990936] RPC: Registered tcp transport module. [ 22.990937] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 23.388821] systemd-journald[505]: Received request to flush runtime journal from PID 1 [ 23.589832] lp: driver loaded but no devices found [ 23.892393] ppdev: user-space parallel port driver [ 24.065168] arp_tables: arp_tables: (C) 2002 David S. Miller [ 26.038822] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.399390] Bridge firewalling registered [ 27.437028] systemd-journald[505]: File /var/log/journal/9e5af678cbd74d7196bfff4c3bccee3c/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 43.623079] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 48.355711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 48.437710] SSE version of gcm_enc/dec engaged. [ 48.449935] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 48.454885] i5500_temp 0000:00:14.3: Sensor seems to be disabled [ 48.790221] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c70 [ 48.808927] usblp 1-6:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0042 [ 48.808956] usbcore: registered new interface driver usblp [ 48.937343] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247) [ 48.937347] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247) [ 48.937351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 48.937353] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 48.937355] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 48.937357] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 48.937358] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 48.937360] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 48.937362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 48.937363] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 49.768070] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 50.355433] nvidia-uvm: Loaded the UVM driver, major device number 239. [ 51.934738] snd_hda_intel 0000:03:00.1: Disabling MSI [ 51.934746] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 52.137763] media: Linux media interface: v0.10 [ 52.474208] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 52.474209] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 52.474211] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 52.474211] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 52.474212] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 52.474213] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 52.474214] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 52.474215] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 52.474216] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 52.488387] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 52.488488] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 52.488615] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 52.488683] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 52.488741] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 52.488807] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 52.488873] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 52.488936] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 52.496250] Linux video capture interface: v2.00 [ 52.633689] usbcore: registered new interface driver snd-usb-audio [ 52.633714] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 52.634603] uvcvideo 1-4:1.0: Entity type for entity Processing 3 was not initialized! [ 52.634604] uvcvideo 1-4:1.0: Entity type for entity Extension 6 was not initialized! [ 52.634606] uvcvideo 1-4:1.0: Entity type for entity Extension 12 was not initialized! [ 52.634607] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized! [ 52.634608] uvcvideo 1-4:1.0: Entity type for entity Extension 8 was not initialized! [ 52.634609] uvcvideo 1-4:1.0: Entity type for entity Extension 9 was not initialized! [ 52.634610] uvcvideo 1-4:1.0: Entity type for entity Extension 10 was not initialized! [ 52.634611] uvcvideo 1-4:1.0: Entity type for entity Extension 11 was not initialized! [ 52.634674] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input16 [ 52.634735] usbcore: registered new interface driver uvcvideo [ 52.634736] USB Video Class driver (1.1.1) [ 52.885334] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17 [ 52.885398] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input18 [ 52.885462] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input19 [ 52.885523] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input20 [ 55.021777] Adding 5927948k swap on /dev/sdd1. Priority:-2 extents:1 across:5927948k SSFS [ 55.149125] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null) [ 56.104041] audit: type=1400 audit(1603832502.410:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1255 comm="apparmor_parser" [ 56.104132] audit: type=1400 audit(1603832502.410:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1254 comm="apparmor_parser" [ 56.104376] audit: type=1400 audit(1603832502.410:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1253 comm="apparmor_parser" [ 56.104379] audit: type=1400 audit(1603832502.410:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1253 comm="apparmor_parser" [ 56.104381] audit: type=1400 audit(1603832502.410:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1253 comm="apparmor_parser" [ 56.104913] audit: type=1400 audit(1603832502.410:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1261 comm="apparmor_parser" [ 56.104993] audit: type=1400 audit(1603832502.410:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1257 comm="apparmor_parser" [ 56.105240] audit: type=1400 audit(1603832502.410:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1250 comm="apparmor_parser" [ 56.105243] audit: type=1400 audit(1603832502.410:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1250 comm="apparmor_parser" [ 56.105245] audit: type=1400 audit(1603832502.410:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1250 comm="apparmor_parser" [ 63.014342] usblp0: removed [ 63.020775] usblp 1-6:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0042 [ 64.040023] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 64.291616] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 64.294551] sky2 0000:05:00.0 enp5s0: enabling interface [ 64.295151] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 67.217092] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [ 67.217118] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 69.247800] vboxdrv: Found 12 processor cores [ 69.264596] vboxdrv: TSC mode is Invariant, tentative frequency 3340904861 Hz [ 69.264597] vboxdrv: Successfully loaded version 5.2.42_Ubuntu (interface 0x00290001) [ 69.270098] VBoxNetFlt: Successfully started. [ 69.275433] VBoxNetAdp: Successfully started. [ 69.525727] VBoxPciLinuxInit [ 69.527811] vboxpci: IOMMU not found (not registered) [ 69.921163] aufs 4.15-20180219 [ 69.921354] aufs aufs_fill_super:912:mount[1930]: no arg [ 70.105819] overlayfs: missing 'lowerdir' [ 78.291526] Ebtables v2.0 registered [ 78.875721] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 78.875921] caller os_map_kernel_space.part.7+0x74/0x90 [nvidia] mapping multiple BARs [ 79.259597] aufs aufs_fill_super:912:mount[2474]: no arg [ 79.274056] overlayfs: missing 'lowerdir' [ 79.507336] aufs aufs_fill_super:912:mount[2558]: no arg [ 79.510173] virbr0: port 1(virbr0-nic) entered blocking state [ 79.510174] virbr0: port 1(virbr0-nic) entered disabled state [ 79.510234] device virbr0-nic entered promiscuous mode [ 79.521278] overlayfs: missing 'lowerdir' [ 79.572309] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 79.772678] aufs aufs_fill_super:912:mount[2663]: no arg [ 79.787268] overlayfs: missing 'lowerdir' [ 80.015962] aufs aufs_fill_super:912:mount[2728]: no arg [ 80.030783] overlayfs: missing 'lowerdir' [ 80.268261] aufs aufs_fill_super:912:mount[2816]: no arg [ 80.284410] overlayfs: missing 'lowerdir' [ 80.517024] virbr0: port 1(virbr0-nic) entered blocking state [ 80.517026] virbr0: port 1(virbr0-nic) entered listening state [ 80.631811] virbr0: port 1(virbr0-nic) entered disabled state [ 94.324794] systemd-journald[505]: File /var/log/journal/9e5af678cbd74d7196bfff4c3bccee3c/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 96.879994] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14 [ 110.313610] rfkill: input handler disabled [ 2135.396072] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 3263.740458] ata7.00: exception Emask 0x0 SAct 0x60000012 SErr 0x0 action 0x6 frozen [ 3263.740464] ata7.00: failed command: WRITE FPDMA QUEUED [ 3263.740472] ata7.00: cmd 61/50:08:17:96:87/00:00:2e:00:00/40 tag 1 ncq dma 40960 out res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 3263.740475] ata7.00: status: { DRDY } [ 3263.740477] ata7.00: failed command: WRITE FPDMA QUEUED [ 3263.740483] ata7.00: cmd 61/10:20:07:37:e0/01:00:01:00:00/40 tag 4 ncq dma 139264 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 3263.740486] ata7.00: status: { DRDY } [ 3263.740489] ata7.00: failed command: READ FPDMA QUEUED [ 3263.740495] ata7.00: cmd 60/08:e8:27:93:e4/00:00:01:00:00/40 tag 29 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 3263.740498] ata7.00: status: { DRDY } [ 3263.740501] ata7.00: failed command: READ FPDMA QUEUED [ 3263.740507] ata7.00: cmd 60/48:f0:07:47:e4/00:00:01:00:00/40 tag 30 ncq dma 36864 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 3263.740509] ata7.00: status: { DRDY } [ 3263.740518] ata7: hard resetting link [ 3264.216419] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [ 3264.229255] ata7.00: configured for UDMA/133 [ 3264.229265] ata7: EH complete [ 7271.330570] perf: interrupt took too long (3128 > 3126), lowering kernel.perf_event_max_sample_rate to 63750 [10775.674497] PM: suspend entry (deep) [10775.674500] PM: Syncing filesystems ... done. [10776.993154] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0 [10777.429221] rfkill: input handler enabled [10777.693496] Freezing user space processes ... (elapsed 0.002 seconds) done. [10777.696021] OOM killer disabled. [10777.696021] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10777.697288] Suspending console(s) (use no_console_suspend to debug) [10777.741232] sd 7:0:0:0: [sdd] Synchronizing SCSI cache [10777.741337] sd 7:0:0:0: [sdd] Stopping disk [10777.741359] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [10777.741397] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [10777.741400] sd 2:0:0:0: [sda] Synchronizing SCSI cache [10777.741452] sd 6:0:0:0: [sdc] Stopping disk [10777.741459] sd 3:0:0:0: [sdb] Stopping disk [10777.741489] sd 2:0:0:0: [sda] Stopping disk [10778.769179] snd_hda_intel 0000:03:00.1: spurious response 0x9000094:0x0, last cmd=0x5f2f2d [10778.769182] snd_hda_intel 0000:03:00.1: spurious response 0x185600f0:0x0, last cmd=0x5f2f2d [10778.769184] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x5f2f2d [10778.769186] snd_hda_intel 0000:03:00.1: spurious response 0x83:0x0, last cmd=0x5f2f2d [10778.769188] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x5f2f2d [10778.769190] snd_hda_intel 0000:03:00.1: spurious response 0x407381:0x0, last cmd=0x5f2f2d [10778.769192] snd_hda_intel 0000:03:00.1: spurious response 0xb0a0908:0x0, last cmd=0x5f2f2d [10778.769194] snd_hda_intel 0000:03:00.1: spurious response 0xb0a0908:0x0, last cmd=0x5f2f2d [10778.769196] snd_hda_intel 0000:03:00.1: spurious response 0x9000094:0x0, last cmd=0x5f2f2d [10778.769197] snd_hda_intel 0000:03:00.1: spurious response 0x185600f0:0x0, last cmd=0x5f2f2d [10779.185668] ACPI: Preparing to enter system sleep state S3 [10779.186225] PM: Saving platform NVS memory [10779.186460] Disabling non-boot CPUs ... [10779.202758] smpboot: CPU 1 is now offline [10779.226763] smpboot: CPU 2 is now offline [10779.250687] smpboot: CPU 3 is now offline [10779.274659] smpboot: CPU 4 is now offline [10779.298667] smpboot: CPU 5 is now offline [10779.322764] smpboot: CPU 6 is now offline [10779.345570] IRQ 38: no longer affine to CPU7 [10779.346574] smpboot: CPU 7 is now offline [10779.369590] IRQ 34: no longer affine to CPU8 [10779.370600] smpboot: CPU 8 is now offline [10779.393510] IRQ 17: no longer affine to CPU9 [10779.393516] IRQ 19: no longer affine to CPU9 [10779.393568] IRQ 25: no longer affine to CPU9 [10779.393579] IRQ 35: no longer affine to CPU9 [10779.394586] smpboot: CPU 9 is now offline [10779.417519] IRQ 21: no longer affine to CPU10 [10779.417524] IRQ 23: no longer affine to CPU10 [10779.417585] IRQ 32: no longer affine to CPU10 [10779.418597] smpboot: CPU 10 is now offline [10779.441489] IRQ 18: no longer affine to CPU11 [10779.442563] smpboot: CPU 11 is now offline [10779.444580] ACPI: Low-level resume complete [10779.444627] PM: Restoring platform NVS memory [10779.445898] Enabling non-boot CPUs ... [10779.445939] x86: Booting SMP configuration: [10779.445940] smpboot: Booting Node 0 Processor 1 APIC 0x2 [10779.449271] cache: parent cpu1 should not be sleeping [10779.449630] CPU1 is up [10779.449661] smpboot: Booting Node 0 Processor 2 APIC 0x4 [10779.452974] cache: parent cpu2 should not be sleeping [10779.453345] CPU2 is up [10779.453374] smpboot: Booting Node 0 Processor 3 APIC 0x10 [10779.456696] cache: parent cpu3 should not be sleeping [10779.457080] CPU3 is up [10779.457110] smpboot: Booting Node 0 Processor 4 APIC 0x12 [10779.460312] cache: parent cpu4 should not be sleeping [10779.460706] CPU4 is up [10779.460736] smpboot: Booting Node 0 Processor 5 APIC 0x14 [10779.463941] cache: parent cpu5 should not be sleeping [10779.464348] CPU5 is up [10779.464375] smpboot: Booting Node 0 Processor 6 APIC 0x1 [10779.466950] cache: parent cpu6 should not be sleeping [10779.467611] CPU6 is up [10779.467637] smpboot: Booting Node 0 Processor 7 APIC 0x3 [10779.470232] cache: parent cpu7 should not be sleeping [10779.470623] CPU7 is up [10779.470646] smpboot: Booting Node 0 Processor 8 APIC 0x5 [10779.473234] cache: parent cpu8 should not be sleeping [10779.473644] CPU8 is up [10779.473677] smpboot: Booting Node 0 Processor 9 APIC 0x11 [10779.476283] cache: parent cpu9 should not be sleeping [10779.476707] CPU9 is up [10779.476729] smpboot: Booting Node 0 Processor 10 APIC 0x13 [10779.479278] cache: parent cpu10 should not be sleeping [10779.479713] CPU10 is up [10779.479737] smpboot: Booting Node 0 Processor 11 APIC 0x15 [10779.482269] cache: parent cpu11 should not be sleeping [10779.482725] CPU11 is up [10779.495399] ACPI: Waking up from system sleep state S3 [10779.827746] usb usb3: root hub lost power or was reset [10779.827783] usb usb4: root hub lost power or was reset [10779.827825] usb usb5: root hub lost power or was reset [10779.827848] usb usb6: root hub lost power or was reset [10779.827889] usb usb7: root hub lost power or was reset [10779.827952] usb usb8: root hub lost power or was reset [10779.827960] usb usb9: root hub lost power or was reset [10779.827962] usb usb10: root hub lost power or was reset [10779.828269] sd 2:0:0:0: [sda] Starting disk [10779.828271] sd 3:0:0:0: [sdb] Starting disk [10779.828272] sd 6:0:0:0: [sdc] Starting disk [10779.828274] sd 7:0:0:0: [sdd] Starting disk [10779.850444] usb usb11: root hub lost power or was reset [10779.850445] usb usb12: root hub lost power or was reset [10780.171367] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [10780.202601] ata5: SATA link down (SStatus 0 SControl 300) [10780.202819] ata6: SATA link down (SStatus 0 SControl 300) [10780.303334] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [10780.303791] ata8.00: configured for UDMA/133 [10780.303833] ata8.00: Enabling discard_zeroes_data [10780.319329] usb 5-1: reset low-speed USB device number 2 using uhci_hcd [10780.359299] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 47 [10780.363300] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10780.366817] ata2.00: configured for UDMA/100 [10780.531316] firewire_core 0000:07:02.0: rediscovered device fw0 [10780.663325] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10780.669731] ata1.00: configured for UDMA/100 [10781.622997] OOM killer enabled. [10781.622998] Restarting tasks ... done. [10781.632852] PM: suspend exit [10781.804326] rfkill: input handler disabled [10782.757119] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [10786.735318] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [10786.746769] ata7.00: configured for UDMA/133 [10789.867342] ata4: softreset failed (device not ready) [10789.879326] ata3: softreset failed (device not ready) [10790.831377] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10790.843399] ata3.00: configured for UDMA/133 [10790.939363] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10790.951375] ata4.00: configured for UDMA/133 [10791.149118] sky2 0000:05:00.0 enp5s0: disabling interface [10791.400683] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [10791.403628] sky2 0000:05:00.0 enp5s0: enabling interface [10791.403729] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [10794.798392] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [10794.798413] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [10863.536886] systemd-sysv-generator[16545]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [10864.890801] systemd-sysv-generator[16608]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [10866.998263] systemd-sysv-generator[16673]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [10871.049728] systemd-sysv-generator[16736]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [10871.594996] kauditd_printk_skb: 138 callbacks suppressed [10871.594998] audit: type=1400 audit(1603890284.331:150): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/mysqld" pid=16753 comm="apparmor_parser" [10904.900474] audit: type=1400 audit(1603890317.655:151): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/mysqld" pid=17017 comm="apparmor_parser" [10905.431835] systemd-sysv-generator[17042]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [10906.105670] systemd-sysv-generator[17081]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [11017.567506] cfg80211: Loading compiled-in X.509 certificates for regulatory database [11017.571430] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [11168.731630] ata7.00: exception Emask 0x0 SAct 0x7e053fff SErr 0x0 action 0x6 frozen [11168.731638] ata7.00: failed command: READ FPDMA QUEUED [11168.731645] ata7.00: cmd 60/08:00:cf:15:c0/00:00:02:00:00/40 tag 0 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731648] ata7.00: status: { DRDY } [11168.731651] ata7.00: failed command: READ FPDMA QUEUED [11168.731657] ata7.00: cmd 60/08:08:d7:15:c0/00:00:02:00:00/40 tag 1 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731660] ata7.00: status: { DRDY } [11168.731662] ata7.00: failed command: READ FPDMA QUEUED [11168.731668] ata7.00: cmd 60/08:10:df:15:c0/00:00:02:00:00/40 tag 2 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [11168.731673] ata7.00: status: { DRDY } [11168.731674] ata7.00: failed command: READ FPDMA QUEUED [11168.731677] ata7.00: cmd 60/08:18:e7:15:c0/00:00:02:00:00/40 tag 3 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731679] ata7.00: status: { DRDY } [11168.731680] ata7.00: failed command: READ FPDMA QUEUED [11168.731683] ata7.00: cmd 60/08:20:f7:15:c0/00:00:02:00:00/40 tag 4 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731684] ata7.00: status: { DRDY } [11168.731685] ata7.00: failed command: READ FPDMA QUEUED [11168.731688] ata7.00: cmd 60/08:28:ff:15:c0/00:00:02:00:00/40 tag 5 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731689] ata7.00: status: { DRDY } [11168.731691] ata7.00: failed command: READ FPDMA QUEUED [11168.731693] ata7.00: cmd 60/08:30:07:16:c0/00:00:02:00:00/40 tag 6 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731695] ata7.00: status: { DRDY } [11168.731696] ata7.00: failed command: READ FPDMA QUEUED [11168.731699] ata7.00: cmd 60/08:38:0f:16:c0/00:00:02:00:00/40 tag 7 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731700] ata7.00: status: { DRDY } [11168.731701] ata7.00: failed command: READ FPDMA QUEUED [11168.731704] ata7.00: cmd 60/08:40:17:16:c0/00:00:02:00:00/40 tag 8 ncq dma 4096 in res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731706] ata7.00: status: { DRDY } [11168.731707] ata7.00: failed command: READ FPDMA QUEUED [11168.731710] ata7.00: cmd 60/08:48:1f:16:c0/00:00:02:00:00/40 tag 9 ncq dma 4096 in res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731711] ata7.00: status: { DRDY } [11168.731712] ata7.00: failed command: READ FPDMA QUEUED [11168.731715] ata7.00: cmd 60/08:50:27:16:c0/00:00:02:00:00/40 tag 10 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731716] ata7.00: status: { DRDY } [11168.731718] ata7.00: failed command: READ FPDMA QUEUED [11168.731721] ata7.00: cmd 60/08:58:2f:16:c0/00:00:02:00:00/40 tag 11 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [11168.731722] ata7.00: status: { DRDY } [11168.731723] ata7.00: failed command: READ FPDMA QUEUED [11168.731726] ata7.00: cmd 60/08:60:37:16:c0/00:00:02:00:00/40 tag 12 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731727] ata7.00: status: { DRDY } [11168.731729] ata7.00: failed command: READ FPDMA QUEUED [11168.731732] ata7.00: cmd 60/08:68:ef:15:c0/00:00:02:00:00/40 tag 13 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731733] ata7.00: status: { DRDY } [11168.731734] ata7.00: failed command: READ FPDMA QUEUED [11168.731737] ata7.00: cmd 60/10:80:b7:b7:58/00:00:0a:00:00/40 tag 16 ncq dma 8192 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731738] ata7.00: status: { DRDY } [11168.731740] ata7.00: failed command: WRITE FPDMA QUEUED [11168.731743] ata7.00: cmd 61/10:90:af:25:44/00:00:01:00:00/40 tag 18 ncq dma 8192 out res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [11168.731744] ata7.00: status: { DRDY } [11168.731745] ata7.00: failed command: READ FPDMA QUEUED [11168.731748] ata7.00: cmd 60/08:c8:9f:15:c0/00:00:02:00:00/40 tag 25 ncq dma 4096 in res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731750] ata7.00: status: { DRDY } [11168.731751] ata7.00: failed command: READ FPDMA QUEUED [11168.731754] ata7.00: cmd 60/08:d0:a7:15:c0/00:00:02:00:00/40 tag 26 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731755] ata7.00: status: { DRDY } [11168.731756] ata7.00: failed command: READ FPDMA QUEUED [11168.731759] ata7.00: cmd 60/08:d8:af:15:c0/00:00:02:00:00/40 tag 27 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731760] ata7.00: status: { DRDY } [11168.731762] ata7.00: failed command: READ FPDMA QUEUED [11168.731764] ata7.00: cmd 60/08:e0:b7:15:c0/00:00:02:00:00/40 tag 28 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731766] ata7.00: status: { DRDY } [11168.731767] ata7.00: failed command: READ FPDMA QUEUED [11168.731770] ata7.00: cmd 60/08:e8:bf:15:c0/00:00:02:00:00/40 tag 29 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731771] ata7.00: status: { DRDY } [11168.731773] ata7.00: failed command: READ FPDMA QUEUED [11168.731775] ata7.00: cmd 60/08:f0:c7:15:c0/00:00:02:00:00/40 tag 30 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11168.731777] ata7.00: status: { DRDY } [11168.731780] ata7: hard resetting link [11169.207561] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [11169.218920] ata7.00: configured for UDMA/133 [11169.218943] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.218947] sd 6:0:0:0: [sdc] tag#0 Sense Key : Illegal Request [current] [11169.218949] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Unaligned write command [11169.218953] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 02 c0 15 cf 00 00 08 00 [11169.218955] print_req_error: I/O error, dev sdc, sector 46142927 [11169.218974] sd 6:0:0:0: [sdc] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.218977] sd 6:0:0:0: [sdc] tag#1 Sense Key : Illegal Request [current] [11169.218979] sd 6:0:0:0: [sdc] tag#1 Add. Sense: Unaligned write command [11169.218982] sd 6:0:0:0: [sdc] tag#1 CDB: Read(10) 28 00 02 c0 15 d7 00 00 08 00 [11169.218983] print_req_error: I/O error, dev sdc, sector 46142935 [11169.218992] sd 6:0:0:0: [sdc] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.218996] sd 6:0:0:0: [sdc] tag#2 Sense Key : Illegal Request [current] [11169.218998] sd 6:0:0:0: [sdc] tag#2 Add. Sense: Unaligned write command [11169.218999] sd 6:0:0:0: [sdc] tag#2 CDB: Read(10) 28 00 02 c0 15 df 00 00 08 00 [11169.218999] print_req_error: I/O error, dev sdc, sector 46142943 [11169.219003] sd 6:0:0:0: [sdc] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219004] sd 6:0:0:0: [sdc] tag#3 Sense Key : Illegal Request [current] [11169.219006] sd 6:0:0:0: [sdc] tag#3 Add. Sense: Unaligned write command [11169.219007] sd 6:0:0:0: [sdc] tag#3 CDB: Read(10) 28 00 02 c0 15 e7 00 00 08 00 [11169.219007] print_req_error: I/O error, dev sdc, sector 46142951 [11169.219011] sd 6:0:0:0: [sdc] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219012] sd 6:0:0:0: [sdc] tag#4 Sense Key : Illegal Request [current] [11169.219013] sd 6:0:0:0: [sdc] tag#4 Add. Sense: Unaligned write command [11169.219015] sd 6:0:0:0: [sdc] tag#4 CDB: Read(10) 28 00 02 c0 15 f7 00 00 08 00 [11169.219015] print_req_error: I/O error, dev sdc, sector 46142967 [11169.219019] sd 6:0:0:0: [sdc] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219020] sd 6:0:0:0: [sdc] tag#5 Sense Key : Illegal Request [current] [11169.219021] sd 6:0:0:0: [sdc] tag#5 Add. Sense: Unaligned write command [11169.219023] sd 6:0:0:0: [sdc] tag#5 CDB: Read(10) 28 00 02 c0 15 ff 00 00 08 00 [11169.219023] print_req_error: I/O error, dev sdc, sector 46142975 [11169.219027] sd 6:0:0:0: [sdc] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219028] sd 6:0:0:0: [sdc] tag#6 Sense Key : Illegal Request [current] [11169.219029] sd 6:0:0:0: [sdc] tag#6 Add. Sense: Unaligned write command [11169.219030] sd 6:0:0:0: [sdc] tag#6 CDB: Read(10) 28 00 02 c0 16 07 00 00 08 00 [11169.219031] print_req_error: I/O error, dev sdc, sector 46142983 [11169.219035] sd 6:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219036] sd 6:0:0:0: [sdc] tag#7 Sense Key : Illegal Request [current] [11169.219037] sd 6:0:0:0: [sdc] tag#7 Add. Sense: Unaligned write command [11169.219038] sd 6:0:0:0: [sdc] tag#7 CDB: Read(10) 28 00 02 c0 16 0f 00 00 08 00 [11169.219039] print_req_error: I/O error, dev sdc, sector 46142991 [11169.219042] sd 6:0:0:0: [sdc] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219043] sd 6:0:0:0: [sdc] tag#8 Sense Key : Illegal Request [current] [11169.219045] sd 6:0:0:0: [sdc] tag#8 Add. Sense: Unaligned write command [11169.219046] sd 6:0:0:0: [sdc] tag#8 CDB: Read(10) 28 00 02 c0 16 17 00 00 08 00 [11169.219046] print_req_error: I/O error, dev sdc, sector 46142999 [11169.219050] sd 6:0:0:0: [sdc] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11169.219051] sd 6:0:0:0: [sdc] tag#9 Sense Key : Illegal Request [current] [11169.219053] sd 6:0:0:0: [sdc] tag#9 Add. Sense: Unaligned write command [11169.219054] sd 6:0:0:0: [sdc] tag#9 CDB: Read(10) 28 00 02 c0 16 1f 00 00 08 00 [11169.219054] print_req_error: I/O error, dev sdc, sector 46143007 [11169.219075] ata7: EH complete [24024.550708] usb 2-5: new high-speed USB device number 2 using ehci-pci [24024.710145] usb 2-5: New USB device found, idVendor=18d1, idProduct=4ee1 [24024.710149] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24024.710151] usb 2-5: Product: Pixel 3 [24024.710153] usb 2-5: Manufacturer: Google [24024.710154] usb 2-5: SerialNumber: 8ACX0Q9BE [24024.724291] usb 2-5: USB disconnect, device number 2 [24025.226743] usb 2-5: new high-speed USB device number 3 using ehci-pci [24025.385770] usb 2-5: New USB device found, idVendor=18d1, idProduct=4ee1 [24025.385773] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24025.385775] usb 2-5: Product: Pixel 3 [24025.385782] usb 2-5: Manufacturer: Google [24025.385784] usb 2-5: SerialNumber: 8ACX0Q9BE [24025.802301] usb 2-5: USB disconnect, device number 3 [24026.310712] usb 2-5: new high-speed USB device number 4 using ehci-pci [24026.468530] usb 2-5: New USB device found, idVendor=18d1, idProduct=4ee1 [24026.468531] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24026.468532] usb 2-5: Product: Pixel 3 [24026.468533] usb 2-5: Manufacturer: Google [24026.468534] usb 2-5: SerialNumber: 8ACX0Q9BE [26372.480997] perf: interrupt took too long (4208 > 3910), lowering kernel.perf_event_max_sample_rate to 47500 [37702.134562] usb 2-5: USB disconnect, device number 4 [39379.898941] systemd-sysv-generator[19175]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [39386.234599] systemd-sysv-generator[19237]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [46466.308941] audit: type=1400 audit(1603925878.957:152): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-450.80.02-rc" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [46466.309504] audit: type=1400 audit(1603925878.957:153): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/26825/comm" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [46466.321318] audit: type=1400 audit(1603925878.969:154): apparmor="ALLOWED" operation="sendmsg" profile="libreoffice-soffice" pid=26825 comm="soffice.bin" family="unix" sock_type="dgram" protocol=0 requested_mask="send" denied_mask="send" addr=none peer_addr="@7661722F72756E2F6E76696469612D786472697665722D63336334306436650000000000000000000000000000000000000000000000000000000000000000" peer="unconfined" [46466.321546] audit: type=1400 audit(1603925878.969:155): apparmor="ALLOWED" operation="sendmsg" profile="libreoffice-soffice" pid=26825 comm="soffice.bin" family="unix" sock_type="dgram" protocol=0 requested_mask="send" denied_mask="send" addr=none peer_addr="@7661722F72756E2F6E76696469612D786472697665722D63336334306436650000000000000000000000000000000000000000000000000000000000000000" peer="unconfined" [46466.324134] audit: type=1400 audit(1603925878.969:156): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [46466.324317] audit: type=1400 audit(1603925878.973:157): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/devices" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [46466.324345] audit: type=1400 audit(1603925878.973:158): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [46466.324370] audit: type=1400 audit(1603925878.973:159): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=26825 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0 [46466.324388] audit: type=1400 audit(1603925878.973:160): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/devices/system/memory/block_size_bytes" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [46466.324480] audit: type=1400 audit(1603925878.973:161): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=26825 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [53872.442257] PM: suspend entry (deep) [53872.442259] PM: Syncing filesystems ... done. [53873.762051] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0 [53873.934747] rfkill: input handler enabled [53874.202299] Freezing user space processes ... (elapsed 0.002 seconds) done. [53874.204990] OOM killer disabled. [53874.204991] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [53874.206267] Suspending console(s) (use no_console_suspend to debug) [53874.238162] sd 7:0:0:0: [sdd] Synchronizing SCSI cache [53874.238173] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [53874.238234] sd 3:0:0:0: [sdb] Stopping disk [53874.238262] sd 7:0:0:0: [sdd] Stopping disk [53874.242150] sd 2:0:0:0: [sda] Synchronizing SCSI cache [53874.242231] sd 2:0:0:0: [sda] Stopping disk [53874.242323] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [53874.242436] sd 6:0:0:0: [sdc] Stopping disk [53875.282064] snd_hdac_bus_update_rirb: 101 callbacks suppressed [53875.282069] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x4f2f17 [53875.282071] snd_hda_intel 0000:03:00.1: spurious response 0x40008:0x0, last cmd=0x4f2f17 [53875.282073] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x4f2f17 [53875.282075] snd_hda_intel 0000:03:00.1: spurious response 0x407381:0x0, last cmd=0x4f2f17 [53875.282077] snd_hda_intel 0000:03:00.1: spurious response 0xb0a0908:0x0, last cmd=0x4f2f17 [53875.282079] snd_hda_intel 0000:03:00.1: spurious response 0xb0a0908:0x0, last cmd=0x4f2f17 [53875.282081] snd_hda_intel 0000:03:00.1: spurious response 0x9000094:0x0, last cmd=0x4f2f17 [53875.282083] snd_hda_intel 0000:03:00.1: spurious response 0x185600f0:0x0, last cmd=0x4f2f17 [53875.282085] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x4f2f17 [53875.282087] snd_hda_intel 0000:03:00.1: spurious response 0x81:0x0, last cmd=0x4f2f17 [53877.026608] ACPI: Preparing to enter system sleep state S3 [53877.027165] PM: Saving platform NVS memory [53877.027420] Disabling non-boot CPUs ... [53877.043625] smpboot: CPU 1 is now offline [53877.067626] smpboot: CPU 2 is now offline [53877.091614] smpboot: CPU 3 is now offline [53877.115601] smpboot: CPU 4 is now offline [53877.139564] smpboot: CPU 5 is now offline [53877.163745] smpboot: CPU 6 is now offline [53877.186415] irq_migrate_all_off_this_cpu: 2 callbacks suppressed [53877.186416] IRQ 19: no longer affine to CPU7 [53877.186473] IRQ 35: no longer affine to CPU7 [53877.187477] smpboot: CPU 7 is now offline [53877.210407] IRQ 18: no longer affine to CPU8 [53877.210461] IRQ 26: no longer affine to CPU8 [53877.210468] IRQ 27: no longer affine to CPU8 [53877.211482] smpboot: CPU 8 is now offline [53877.234395] IRQ 21: no longer affine to CPU9 [53877.234448] IRQ 25: no longer affine to CPU9 [53877.234463] IRQ 38: no longer affine to CPU9 [53877.235469] smpboot: CPU 9 is now offline [53877.258366] IRQ 17: no longer affine to CPU10 [53877.258435] IRQ 32: no longer affine to CPU10 [53877.259446] smpboot: CPU 10 is now offline [53877.283454] smpboot: CPU 11 is now offline [53877.285471] ACPI: Low-level resume complete [53877.285517] PM: Restoring platform NVS memory [53877.286782] Enabling non-boot CPUs ... [53877.286827] x86: Booting SMP configuration: [53877.286828] smpboot: Booting Node 0 Processor 1 APIC 0x2 [53877.290163] cache: parent cpu1 should not be sleeping [53877.290525] CPU1 is up [53877.290557] smpboot: Booting Node 0 Processor 2 APIC 0x4 [53877.293885] cache: parent cpu2 should not be sleeping [53877.294258] CPU2 is up [53877.294286] smpboot: Booting Node 0 Processor 3 APIC 0x10 [53877.297607] cache: parent cpu3 should not be sleeping [53877.297988] CPU3 is up [53877.298019] smpboot: Booting Node 0 Processor 4 APIC 0x12 [53877.301227] cache: parent cpu4 should not be sleeping [53877.301622] CPU4 is up [53877.301651] smpboot: Booting Node 0 Processor 5 APIC 0x14 [53877.304778] snd_hda_intel 0000:03:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x004f2f18 [53877.304853] cache: parent cpu5 should not be sleeping [53877.305257] CPU5 is up [53877.305286] smpboot: Booting Node 0 Processor 6 APIC 0x1 [53877.307861] cache: parent cpu6 should not be sleeping [53877.308518] CPU6 is up [53877.308545] smpboot: Booting Node 0 Processor 7 APIC 0x3 [53877.311138] cache: parent cpu7 should not be sleeping [53877.311527] CPU7 is up [53877.311559] smpboot: Booting Node 0 Processor 8 APIC 0x5 [53877.314146] cache: parent cpu8 should not be sleeping [53877.314555] CPU8 is up [53877.314579] smpboot: Booting Node 0 Processor 9 APIC 0x11 [53877.317198] cache: parent cpu9 should not be sleeping [53877.317624] CPU9 is up [53877.317647] smpboot: Booting Node 0 Processor 10 APIC 0x13 [53877.320192] cache: parent cpu10 should not be sleeping [53877.320631] CPU10 is up [53877.320653] smpboot: Booting Node 0 Processor 11 APIC 0x15 [53877.323186] cache: parent cpu11 should not be sleeping [53877.323642] CPU11 is up [53877.336290] ACPI: Waking up from system sleep state S3 [53877.668619] usb usb3: root hub lost power or was reset [53877.668644] usb usb4: root hub lost power or was reset [53877.668686] usb usb5: root hub lost power or was reset [53877.668725] usb usb6: root hub lost power or was reset [53877.668745] usb usb7: root hub lost power or was reset [53877.668781] usb usb8: root hub lost power or was reset [53877.668806] usb usb9: root hub lost power or was reset [53877.668808] usb usb10: root hub lost power or was reset [53877.669339] sd 3:0:0:0: [sdb] Starting disk [53877.669340] sd 2:0:0:0: [sda] Starting disk [53877.669344] sd 6:0:0:0: [sdc] Starting disk [53877.669345] sd 7:0:0:0: [sdd] Starting disk [53877.691304] usb usb11: root hub lost power or was reset [53877.691305] usb usb12: root hub lost power or was reset [53878.012236] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [53878.043111] ata6: SATA link down (SStatus 0 SControl 300) [53878.043396] ata5: SATA link down (SStatus 0 SControl 300) [53878.144222] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [53878.144734] ata8.00: configured for UDMA/133 [53878.144787] ata8.00: Enabling discard_zeroes_data [53878.164218] usb 5-1: reset low-speed USB device number 2 using uhci_hcd [53878.204237] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [53878.207785] ata2.00: configured for UDMA/100 [53878.244309] firewire_core 0000:07:02.0: rediscovered device fw0 [53878.440216] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [53878.446626] ata1.00: configured for UDMA/100 [53880.319350] OOM killer enabled. [53880.319351] Restarting tasks ... done. [53880.327106] PM: suspend exit [53880.517078] rfkill: input handler disabled [53880.603621] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [53884.624197] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [53884.635713] ata7.00: configured for UDMA/133 [53887.712247] ata4: softreset failed (device not ready) [53887.716209] ata3: softreset failed (device not ready) [53888.728235] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [53888.740264] ata3.00: configured for UDMA/133 [53888.844238] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [53888.856184] ata4.00: configured for UDMA/133 [53889.174648] sky2 0000:05:00.0 enp5s0: disabling interface [53889.316251] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [53889.319208] sky2 0000:05:00.0 enp5s0: enabling interface [53889.319320] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [53892.793077] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [53892.793103] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [102215.036315] PM: suspend entry (deep) [102215.036317] PM: Syncing filesystems ... done. [102216.576449] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0 [102216.763927] rfkill: input handler enabled [102217.026890] Freezing user space processes ... (elapsed 0.002 seconds) done. [102217.029735] OOM killer disabled. [102217.029736] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [102217.031213] Suspending console(s) (use no_console_suspend to debug) [102217.068594] sd 7:0:0:0: [sdd] Synchronizing SCSI cache [102217.068626] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [102217.068627] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [102217.068699] sd 7:0:0:0: [sdd] Stopping disk [102217.068701] sd 6:0:0:0: [sdc] Stopping disk [102217.068759] sd 3:0:0:0: [sdb] Stopping disk [102217.072609] sd 2:0:0:0: [sda] Synchronizing SCSI cache [102217.072671] sd 2:0:0:0: [sda] Stopping disk [102217.108476] snd_hdac_bus_update_rirb: 123 callbacks suppressed [102217.108480] snd_hda_intel 0000:03:00.1: spurious response 0xc000000f:0x0, last cmd=0x4f2f16 [102217.108482] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x4f2f16 [102217.108485] snd_hda_intel 0000:03:00.1: spurious response 0x40008:0x0, last cmd=0x4f2f16 [102217.108486] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x4f2f16 [102217.108488] snd_hda_intel 0000:03:00.1: spurious response 0x407381:0x0, last cmd=0x4f2f16 [102217.108490] snd_hda_intel 0000:03:00.1: spurious response 0xb0a0908:0x0, last cmd=0x4f2f16 [102217.108492] snd_hda_intel 0000:03:00.1: spurious response 0xb0a0908:0x0, last cmd=0x4f2f16 [102217.108494] snd_hda_intel 0000:03:00.1: spurious response 0x9000094:0x0, last cmd=0x4f2f16 [102217.108496] snd_hda_intel 0000:03:00.1: spurious response 0x185600f0:0x0, last cmd=0x4f2f16 [102217.108498] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x4f2f16 [102217.108509] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 22 [102218.116475] snd_hda_intel 0000:03:00.1: azx_get_response timeout, switching to single_cmd mode: last cmd=0x004f0900 [102218.116578] azx_single_wait_for_response: 58 callbacks suppressed [102218.116581] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102218.116783] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102218.116975] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102218.424528] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102218.744608] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102218.745007] ACPI: Preparing to enter system sleep state S3 [102218.745561] PM: Saving platform NVS memory [102218.745821] Disabling non-boot CPUs ... [102218.762024] smpboot: CPU 1 is now offline [102218.786040] smpboot: CPU 2 is now offline [102218.810022] smpboot: CPU 3 is now offline [102218.833978] smpboot: CPU 4 is now offline [102218.857991] smpboot: CPU 5 is now offline [102218.882122] smpboot: CPU 6 is now offline [102218.904806] irq_migrate_all_off_this_cpu: 3 callbacks suppressed [102218.904807] IRQ 19: no longer affine to CPU7 [102218.904861] IRQ 29: no longer affine to CPU7 [102218.904870] IRQ 35: no longer affine to CPU7 [102218.905874] smpboot: CPU 7 is now offline [102218.928803] IRQ 18: no longer affine to CPU8 [102218.929868] smpboot: CPU 8 is now offline [102218.952783] IRQ 21: no longer affine to CPU9 [102218.952836] IRQ 25: no longer affine to CPU9 [102218.952842] IRQ 27: no longer affine to CPU9 [102218.952849] IRQ 31: no longer affine to CPU9 [102218.952855] IRQ 38: no longer affine to CPU9 [102218.953860] smpboot: CPU 9 is now offline [102218.976768] IRQ 17: no longer affine to CPU10 [102218.977842] smpboot: CPU 10 is now offline [102219.001816] smpboot: CPU 11 is now offline [102219.003746] ACPI: Low-level resume complete [102219.003792] PM: Restoring platform NVS memory [102219.005068] Enabling non-boot CPUs ... [102219.005131] x86: Booting SMP configuration: [102219.005132] smpboot: Booting Node 0 Processor 1 APIC 0x2 [102219.008465] cache: parent cpu1 should not be sleeping [102219.008824] CPU1 is up [102219.008852] smpboot: Booting Node 0 Processor 2 APIC 0x4 [102219.012174] cache: parent cpu2 should not be sleeping [102219.012546] CPU2 is up [102219.012578] smpboot: Booting Node 0 Processor 3 APIC 0x10 [102219.015900] cache: parent cpu3 should not be sleeping [102219.016282] CPU3 is up [102219.016310] smpboot: Booting Node 0 Processor 4 APIC 0x12 [102219.019513] cache: parent cpu4 should not be sleeping [102219.019909] CPU4 is up [102219.019939] smpboot: Booting Node 0 Processor 5 APIC 0x14 [102219.023144] cache: parent cpu5 should not be sleeping [102219.023552] CPU5 is up [102219.023580] smpboot: Booting Node 0 Processor 6 APIC 0x1 [102219.026155] cache: parent cpu6 should not be sleeping [102219.026814] CPU6 is up [102219.026869] smpboot: Booting Node 0 Processor 7 APIC 0x3 [102219.029462] cache: parent cpu7 should not be sleeping [102219.029854] CPU7 is up [102219.029876] smpboot: Booting Node 0 Processor 8 APIC 0x5 [102219.032466] cache: parent cpu8 should not be sleeping [102219.032874] CPU8 is up [102219.032902] smpboot: Booting Node 0 Processor 9 APIC 0x11 [102219.035487] cache: parent cpu9 should not be sleeping [102219.035910] CPU9 is up [102219.035933] smpboot: Booting Node 0 Processor 10 APIC 0x13 [102219.038469] cache: parent cpu10 should not be sleeping [102219.038917] CPU10 is up [102219.038942] smpboot: Booting Node 0 Processor 11 APIC 0x15 [102219.041487] cache: parent cpu11 should not be sleeping [102219.041943] CPU11 is up [102219.054622] ACPI: Waking up from system sleep state S3 [102219.054789] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102219.386732] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [102219.386969] usb usb3: root hub lost power or was reset [102219.387003] usb usb4: root hub lost power or was reset [102219.387027] usb usb5: root hub lost power or was reset [102219.387083] usb usb6: root hub lost power or was reset [102219.387112] usb usb7: root hub lost power or was reset [102219.387182] usb usb8: root hub lost power or was reset [102219.387187] usb usb9: root hub lost power or was reset [102219.387188] usb usb10: root hub lost power or was reset [102219.391685] sd 2:0:0:0: [sda] Starting disk [102219.391686] sd 3:0:0:0: [sdb] Starting disk [102219.391725] sd 7:0:0:0: [sdd] Starting disk [102219.391728] sd 6:0:0:0: [sdc] Starting disk [102219.409680] usb usb11: root hub lost power or was reset [102219.409682] usb usb12: root hub lost power or was reset [102219.730550] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [102219.765661] ata5: SATA link down (SStatus 0 SControl 300) [102219.765766] ata6: SATA link down (SStatus 0 SControl 300) [102219.866531] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [102219.867048] ata8.00: configured for UDMA/133 [102219.867101] ata8.00: Enabling discard_zeroes_data [102219.882560] usb 5-1: reset low-speed USB device number 2 using uhci_hcd [102219.926609] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [102219.930191] ata2.00: configured for UDMA/100 [102219.969958] firewire_core 0000:07:02.0: rediscovered device fw0 [102220.162556] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [102220.169014] ata1.00: configured for UDMA/100 [102220.230525] OOM killer enabled. [102220.230525] Restarting tasks ... done. [102220.233506] PM: suspend exit [102220.427539] rfkill: input handler disabled [102222.299979] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [102226.302605] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370) [102226.314145] ata7.00: configured for UDMA/133 [102229.442566] ata4: softreset failed (device not ready) [102229.498569] ata3: softreset failed (device not ready) [102230.458572] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [102230.470574] ata4.00: configured for UDMA/133 [102230.510561] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [102230.522567] ata3.00: configured for UDMA/133 [102230.685472] sky2 0000:05:00.0 enp5s0: disabling interface [102230.853483] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [102230.856439] sky2 0000:05:00.0 enp5s0: enabling interface [102230.856544] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [102234.473799] sky2 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex, flow control both [102234.473810] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [107607.274047] snd_hdac_bus_update_rirb: 338 callbacks suppressed [107607.274050] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x1f0500 [107607.274086] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [107607.274128] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [107607.274168] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [107607.274211] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x770700 [107607.274252] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [107607.274294] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470881 [107607.274336] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [107607.274377] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570882 [107607.274419] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [107614.041952] snd_hdac_bus_update_rirb: 172 callbacks suppressed [107614.041955] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [107614.041958] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [107614.041991] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [107614.042033] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [107614.042075] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x770700 [107614.042144] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470881 [107614.042157] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470881 [107614.042226] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570882 [107614.042241] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570882 [107614.042281] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [109292.145718] snd_hdac_bus_update_rirb: 172 callbacks suppressed [109292.145721] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [109292.145773] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [109292.145775] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [109292.145814] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [109292.145885] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [109292.145897] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [109292.145965] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [109292.145980] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [109292.146049] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [109292.146061] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [111241.286690] snd_hdac_bus_update_rirb: 172 callbacks suppressed [111241.286693] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x1f0500 [111241.286730] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [111241.286772] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [111241.286841] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x770700 [111241.286855] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x770700 [111241.286895] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [111241.286937] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470881 [111241.286979] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [111241.287020] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570882 [111241.287062] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [111256.582696] snd_hdac_bus_update_rirb: 172 callbacks suppressed [111256.582699] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [111256.582703] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [111256.582735] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [111256.582777] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [111256.582852] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [111256.582933] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [111256.582935] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [111256.582942] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [111256.583015] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [111256.583040] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [112272.196846] snd_hdac_bus_update_rirb: 173 callbacks suppressed [112272.196848] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [112272.196851] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [112272.196879] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [112272.196921] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [112272.196985] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [112272.197005] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [112272.197067] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [112272.197087] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [112272.197153] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [112272.197169] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [136332.316466] snd_hdac_bus_update_rirb: 171 callbacks suppressed [136332.316469] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x1f0500 [136332.316504] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [136332.316547] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [136332.316588] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [136332.316630] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x770700 [136332.316672] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [136332.316724] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470881 [136332.316754] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [136332.316797] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570882 [136332.316838] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [137724.182415] snd_hdac_bus_update_rirb: 172 callbacks suppressed [137724.182417] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [137724.182420] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470700 [137724.182453] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570700 [137724.182496] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670700 [137724.182552] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x770700 [137724.182579] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x470100 [137724.182648] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [137724.182661] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x570100 [137724.182732] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [137724.182743] snd_hda_intel 0000:03:00.1: spurious response 0x0:0x0, last cmd=0x670100 [142091.592099] systemd-sysv-generator[4919]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [142094.401668] kauditd_printk_skb: 2 callbacks suppressed [142094.401669] audit: type=1400 audit(1604105377.557:220): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=4989 comm="apparmor_parser" [142094.428764] audit: type=1400 audit(1604105377.585:221): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4989 comm="apparmor_parser" [142095.779763] systemd-sysv-generator[5070]: stat() failed on /etc/init.d/lpd, ignoring: No such file or directory [142096.029175] audit: type=1400 audit(1604105379.185:222): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.canonical-livepatch" pid=5135 comm="apparmor_parser" [142096.029212] audit: type=1400 audit(1604105379.185:223): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.code" pid=5136 comm="apparmor_parser" [142096.029257] audit: type=1400 audit(1604105379.185:224): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5137 comm="apparmor_parser" [142096.029371] audit: type=1400 audit(1604105379.185:225): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.docker" pid=5138 comm="apparmor_parser" [142096.030252] audit: type=1400 audit(1604105379.185:226): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.kubectl" pid=5144 comm="apparmor_parser" [142096.030276] audit: type=1400 audit(1604105379.185:227): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.nmap" pid=5147 comm="apparmor_parser" [142096.030317] audit: type=1400 audit(1604105379.185:228): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.go" pid=5143 comm="apparmor_parser" [142096.030468] audit: type=1400 audit(1604105379.185:229): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine" pid=5134 comm="apparmor_parser" [142101.602135] kauditd_printk_skb: 48 callbacks suppressed [142101.602136] audit: type=1400 audit(1604105384.757:278): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine" pid=5505 comm="apparmor_parser" [142101.602140] audit: type=1400 audit(1604105384.757:279): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/10185/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5505 comm="apparmor_parser" [142102.264319] audit: type=1400 audit(1604105385.417:280): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=5508 comm="apparmor_parser" [142102.312828] audit: type=1400 audit(1604105385.469:281): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5507 comm="apparmor_parser" [142102.319129] audit: type=1400 audit(1604105385.473:282): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=5510 comm="apparmor_parser" [142102.336282] audit: type=1400 audit(1604105385.489:283): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=5509 comm="apparmor_parser" [142102.341954] audit: type=1400 audit(1604105385.497:284): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.kubectl" pid=5512 comm="apparmor_parser" [142102.342102] audit: type=1400 audit(1604105385.497:285): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.kubectl.kubectl" pid=5513 comm="apparmor_parser" [142102.342194] audit: type=1400 audit(1604105385.497:286): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.mongo32" pid=5514 comm="apparmor_parser" [142102.344808] audit: type=1400 audit(1604105385.501:287): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.mongo32.files" pid=5518 comm="apparmor_parser" [142402.503707] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [142402.503712] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [142402.517308] sdb: [LDM] sdb1 [143115.438010] SGI XFS with ACLs, security attributes, realtime, no debug enabled [143115.519857] JFS: nTxBlock = 8192, nTxLock = 65536 [143115.588180] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [143115.673773] QNX4 filesystem 0.2.3 registered.