[15955.585479] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[15955.587065] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15955.593472] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[15955.829606] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[15955.919550] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15956.061595] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15956.501290] usb 2-1.4: new high-speed USB device number 10 using ehci-pci
[15956.587906] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[15956.587914] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15956.587919] usb 2-1.4: Product: F5521gw
[15956.587923] usb 2-1.4: Manufacturer: Lenovo
[15956.587927] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[15956.621686] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[15956.623310] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[15956.624994] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[15956.655192] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[15956.656064] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[15956.657484] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[15956.658073] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[15957.223785] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[15957.240176] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[15957.240180] ata2.00: waking up from sleep
[15957.240183] ata2: SError: { CommWake }
[15957.240187] ata2: hard resetting link
[15957.551717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15957.555119] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[15957.555462] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[15957.555470] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15957.560614] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[15957.560938] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[15957.560944] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15957.562705] ata2.00: configured for UDMA/100
[15957.563651] ata2: EH complete
[15958.761788] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[15958.763718] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[15959.149257] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[15959.153832] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[15959.155672] wlp3s0: authenticated
[15959.156242] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[15959.159895] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=1)
[15959.163255] wlp3s0: associated
[15959.195524] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[15962.604491] ata2.00: disabled
[15962.604817] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[18174.357023] e1000e: enp0s25 NIC Link is Down
[18174.379786] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[18174.699117] PM: suspend entry (deep)
[18174.699121] PM: Syncing filesystems ... done.
[18174.712677] Freezing user space processes ... (elapsed 0.003 seconds) done.
[18174.715899] OOM killer disabled.
[18174.715901] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18174.717016] Suspending console(s) (use no_console_suspend to debug)
[18174.886951] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18174.889951] sd 0:0:0:0: [sda] Stopping disk
[18174.927533] e1000e: EEE TX LPI TIMER: 00000011
[18175.120294] ACPI: EC: interrupt blocked
[18175.146599] ACPI: Preparing to enter system sleep state S3
[18175.154634] ACPI: EC: event blocked
[18175.154636] ACPI: EC: EC stopped
[18175.154638] PM: Saving platform NVS memory
[18175.154664] Disabling non-boot CPUs ...
[18175.164522] IRQ 24: no longer affine to CPU1
[18175.166454] smpboot: CPU 1 is now offline
[18175.190795] smpboot: CPU 2 is now offline
[18175.200662] IRQ 16: no longer affine to CPU3
[18175.200674] IRQ 26: no longer affine to CPU3
[18175.201710] smpboot: CPU 3 is now offline
[18175.217792] smpboot: CPU 4 is now offline
[18175.228564] IRQ 23: no longer affine to CPU5
[18175.229604] smpboot: CPU 5 is now offline
[18175.250646] smpboot: CPU 6 is now offline
[18175.260486] IRQ 28: no longer affine to CPU7
[18175.261539] smpboot: CPU 7 is now offline
[18175.265030] ACPI: Low-level resume complete
[18175.265138] ACPI: EC: EC started
[18175.265139] PM: Restoring platform NVS memory
[18175.265669] Enabling non-boot CPUs ...
[18175.265807] x86: Booting SMP configuration:
[18175.265810] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18175.266900] Disabled fast string operations
[18175.269368]  cache: parent cpu1 should not be sleeping
[18175.270029] CPU1 is up
[18175.270117] smpboot: Booting Node 0 Processor 2 APIC 0x2
[18175.270980] Disabled fast string operations
[18175.273422]  cache: parent cpu2 should not be sleeping
[18175.274082] CPU2 is up
[18175.274176] smpboot: Booting Node 0 Processor 3 APIC 0x3
[18175.275040] Disabled fast string operations
[18175.277448]  cache: parent cpu3 should not be sleeping
[18175.278100] CPU3 is up
[18175.278202] smpboot: Booting Node 0 Processor 4 APIC 0x4
[18175.279082] Disabled fast string operations
[18175.281491]  cache: parent cpu4 should not be sleeping
[18175.282235] CPU4 is up
[18175.282305] smpboot: Booting Node 0 Processor 5 APIC 0x5
[18175.283162] Disabled fast string operations
[18175.285528]  cache: parent cpu5 should not be sleeping
[18175.286296] CPU5 is up
[18175.286363] smpboot: Booting Node 0 Processor 6 APIC 0x6
[18175.287204] Disabled fast string operations
[18175.289545]  cache: parent cpu6 should not be sleeping
[18175.290388] CPU6 is up
[18175.290448] smpboot: Booting Node 0 Processor 7 APIC 0x7
[18175.291306] Disabled fast string operations
[18175.293615]  cache: parent cpu7 should not be sleeping
[18175.294480] CPU7 is up
[18175.303393] ACPI: Waking up from system sleep state S3
[18175.318491] ACPI: EC: interrupt unblocked
[18175.331606] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[18175.344817] ACPI: EC: event unblocked
[18175.345418] sd 0:0:0:0: [sda] Starting disk
[18175.570299] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[18175.570357] usb 2-1.4: reset high-speed USB device number 10 using ehci-pci
[18175.648599] usb 2-1.4: device firmware changed
[18175.664061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18175.664098] ata4: SATA link down (SStatus 0 SControl 300)
[18175.664203] ata5: SATA link down (SStatus 0 SControl 300)
[18175.664298] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18175.667741] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18175.667748] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18175.667754] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18175.668153] ata1.00: supports DRM functions and may not be fully accessible
[18175.668645] ata1.00: NCQ Send/Recv Log not supported
[18175.670928] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18175.670935] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18175.670941] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18175.671358] ata1.00: supports DRM functions and may not be fully accessible
[18175.671932] ata1.00: NCQ Send/Recv Log not supported
[18175.672553] ata1.00: configured for UDMA/133
[18175.898268] firewire_core 0000:0d:00.3: rediscovered device fw0
[18175.926826] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[18176.065066] OOM killer enabled.
[18176.065069] Restarting tasks ... 
[18176.065084] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[18176.065389] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[18176.065401] ata2: ACPI event
[18176.065412] ata2: SError: { PHYRdyChg }
[18176.069424] done.
[18176.069707] usb 2-1.4: USB disconnect, device number 10
[18176.070384] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[18176.075497] ata2: hard resetting link
[18176.090773] video LNXVIDEO:00: Restoring backlight state
[18176.091654] PM: suspend exit
[18176.117988] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[18176.152187] usb 2-1.4: new high-speed USB device number 11 using ehci-pci
[18176.232324] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[18176.232329] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[18176.232332] usb 2-1.4: Product: 㕆㈵朱w
[18176.232335] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[18176.279472] usbhid 2-1.4:1.0: can't add hid device: -71
[18176.279483] usbhid: probe of 2-1.4:1.0 failed with error -71
[18176.330488] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[18176.331730] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18176.337493] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[18176.371100] usb 2-1.4: USB disconnect, device number 11
[18176.573628] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[18176.663874] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18176.795152] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18176.810168] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18176.869471] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[18176.870269] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[18176.870273] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18176.871943] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[18176.886421] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[18176.887356] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[18176.887363] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18176.889137] ata2.00: configured for UDMA/100
[18177.125916] ata2: EH complete
[18177.131902] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[18177.179297] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[18177.179779] sr 1:0:0:0: Attached scsi CD-ROM sr0
[18177.179914] sr 1:0:0:0: Attached scsi generic sg1 type 5
[18177.313114] usb 2-1.4: new high-speed USB device number 12 using ehci-pci
[18177.400122] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[18177.400130] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18177.400134] usb 2-1.4: Product: F5521gw
[18177.400138] usb 2-1.4: Manufacturer: Lenovo
[18177.400142] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[18177.433747] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[18177.435087] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[18177.437313] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[18177.467438] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[18177.468138] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[18177.468983] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[18177.469478] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[18178.026878] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[18179.563705] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[18179.576744] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[18179.959847] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[18179.962170] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[18179.964995] wlp3s0: authenticated
[18179.965903] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[18179.969668] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=1)
[18179.972913] wlp3s0: associated
[18180.007580] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[21995.612367] e1000e: enp0s25 NIC Link is Down
[21995.640086] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[21995.948884] PM: suspend entry (deep)
[21995.948886] PM: Syncing filesystems ... done.
[21995.966719] Freezing user space processes ... (elapsed 0.002 seconds) done.
[21995.969529] OOM killer disabled.
[21995.969531] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[21995.970496] Suspending console(s) (use no_console_suspend to debug)
[21996.145482] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[21996.146837] sd 0:0:0:0: [sda] Stopping disk
[21996.196259] e1000e: EEE TX LPI TIMER: 00000011
[21996.375975] ACPI: EC: interrupt blocked
[21996.403113] ACPI: Preparing to enter system sleep state S3
[21996.411536] ACPI: EC: event blocked
[21996.411538] ACPI: EC: EC stopped
[21996.411540] PM: Saving platform NVS memory
[21996.411566] Disabling non-boot CPUs ...
[21996.422391] IRQ 24: no longer affine to CPU1
[21996.423417] smpboot: CPU 1 is now offline
[21996.439127] smpboot: CPU 2 is now offline
[21996.455115] IRQ 16: no longer affine to CPU3
[21996.455125] IRQ 26: no longer affine to CPU3
[21996.456155] smpboot: CPU 3 is now offline
[21996.469229] smpboot: CPU 4 is now offline
[21996.486059] IRQ 23: no longer affine to CPU5
[21996.487101] smpboot: CPU 5 is now offline
[21996.511181] smpboot: CPU 6 is now offline
[21996.515999] IRQ 28: no longer affine to CPU7
[21996.517054] smpboot: CPU 7 is now offline
[21996.520579] ACPI: Low-level resume complete
[21996.520689] ACPI: EC: EC started
[21996.520691] PM: Restoring platform NVS memory
[21996.521162] Enabling non-boot CPUs ...
[21996.521329] x86: Booting SMP configuration:
[21996.521332] smpboot: Booting Node 0 Processor 1 APIC 0x1
[21996.522419] Disabled fast string operations
[21996.524887]  cache: parent cpu1 should not be sleeping
[21996.525515] CPU1 is up
[21996.525589] smpboot: Booting Node 0 Processor 2 APIC 0x2
[21996.526450] Disabled fast string operations
[21996.528863]  cache: parent cpu2 should not be sleeping
[21996.529515] CPU2 is up
[21996.529591] smpboot: Booting Node 0 Processor 3 APIC 0x3
[21996.530453] Disabled fast string operations
[21996.532856]  cache: parent cpu3 should not be sleeping
[21996.533514] CPU3 is up
[21996.533582] smpboot: Booting Node 0 Processor 4 APIC 0x4
[21996.534444] Disabled fast string operations
[21996.536890]  cache: parent cpu4 should not be sleeping
[21996.537640] CPU4 is up
[21996.537705] smpboot: Booting Node 0 Processor 5 APIC 0x5
[21996.538546] Disabled fast string operations
[21996.540880]  cache: parent cpu5 should not be sleeping
[21996.541632] CPU5 is up
[21996.541705] smpboot: Booting Node 0 Processor 6 APIC 0x6
[21996.542557] Disabled fast string operations
[21996.544920]  cache: parent cpu6 should not be sleeping
[21996.545760] CPU6 is up
[21996.545830] smpboot: Booting Node 0 Processor 7 APIC 0x7
[21996.546674] Disabled fast string operations
[21996.548998]  cache: parent cpu7 should not be sleeping
[21996.549885] CPU7 is up
[21996.558800] ACPI: Waking up from system sleep state S3
[21996.576441] ACPI: EC: interrupt unblocked
[21996.588365] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[21996.601184] ACPI: EC: event unblocked
[21996.611023] sd 0:0:0:0: [sda] Starting disk
[21996.824846] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[21996.824855] usb 2-1.4: reset high-speed USB device number 12 using ehci-pci
[21996.903104] usb 2-1.4: device firmware changed
[21996.926563] ata4: SATA link down (SStatus 0 SControl 300)
[21996.926770] ata5: SATA link down (SStatus 0 SControl 300)
[21996.926809] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[21996.926845] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[21996.930606] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[21996.930615] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[21996.930621] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[21996.930985] ata1.00: supports DRM functions and may not be fully accessible
[21996.931471] ata1.00: NCQ Send/Recv Log not supported
[21996.933717] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[21996.933745] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[21996.933751] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[21996.933994] ata1.00: supports DRM functions and may not be fully accessible
[21996.934579] ata1.00: NCQ Send/Recv Log not supported
[21996.935330] ata1.00: configured for UDMA/133
[21997.131088] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[21997.132015] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[21997.132023] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[21997.147933] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[21997.148889] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[21997.148895] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[21997.150775] ata2.00: configured for UDMA/100
[21997.160819] firewire_core 0000:0d:00.3: rediscovered device fw0
[21997.206953] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[21997.637063] OOM killer enabled.
[21997.637066] Restarting tasks ... done.
[21997.641710] usb 2-1.4: USB disconnect, device number 12
[21997.642478] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[21997.658952] video LNXVIDEO:00: Restoring backlight state
[21997.659827] PM: suspend exit
[21997.687750] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[21997.722750] usb 2-1.4: new high-speed USB device number 13 using ehci-pci
[21997.802657] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[21997.802665] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[21997.802669] usb 2-1.4: Product: 㕆㈵朱w
[21997.802687] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[21997.849633] usbhid 2-1.4:1.0: can't add hid device: -71
[21997.849648] usbhid: probe of 2-1.4:1.0 failed with error -71
[21997.883235] usb 2-1.4: USB disconnect, device number 13
[21997.897065] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[21997.898350] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[21997.904064] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[21998.139836] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[21998.229370] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[21998.261887] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[21998.823808] usb 2-1.4: new high-speed USB device number 14 using ehci-pci
[21998.910255] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[21998.910263] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21998.910268] usb 2-1.4: Product: F5521gw
[21998.910272] usb 2-1.4: Manufacturer: Lenovo
[21998.910276] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[21998.945053] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[21998.946737] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[21998.948443] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[21998.978387] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[21998.979343] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[21998.980571] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[21998.981234] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[21999.540726] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[22001.077146] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[22001.081012] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[22001.435323] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[22001.437792] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[22001.440722] wlp3s0: authenticated
[22001.441587] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[22001.445249] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=1)
[22001.448578] wlp3s0: associated
[22001.495348] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[24916.534853] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[24916.534865] ata2.00: waking up from sleep
[24916.534874] ata2: SError: { CommWake }
[24916.534885] ata2: hard resetting link
[24916.844568] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[24916.848511] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[24916.848947] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[24916.848960] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[24916.854628] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[24916.855083] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[24916.855092] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[24916.856876] ata2.00: configured for UDMA/100
[24916.857768] ata2: EH complete
[24921.904868] ata2.00: disabled
[24921.905204] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[25969.220478] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[25974.330955] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[25974.363249] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[25974.450574] wlp3s0: authenticated
[25974.451594] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[25974.453281] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[25974.456462] wlp3s0: associated
[25974.551704] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[26409.338666] e1000e: enp0s25 NIC Link is Down
[26409.368909] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[26409.528232] PM: suspend entry (deep)
[26409.528234] PM: Syncing filesystems ... done.
[26409.552063] Freezing user space processes ... (elapsed 0.003 seconds) done.
[26409.555180] OOM killer disabled.
[26409.555182] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[26409.556757] Suspending console(s) (use no_console_suspend to debug)
[26409.745051] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[26409.746413] sd 0:0:0:0: [sda] Stopping disk
[26409.791383] e1000e: EEE TX LPI TIMER: 00000011
[26410.051385] ACPI: EC: interrupt blocked
[26410.077513] ACPI: Preparing to enter system sleep state S3
[26410.086453] ACPI: EC: event blocked
[26410.086455] ACPI: EC: EC stopped
[26410.086457] PM: Saving platform NVS memory
[26410.086483] Disabling non-boot CPUs ...
[26410.096949] IRQ 24: no longer affine to CPU1
[26410.097985] smpboot: CPU 1 is now offline
[26410.121948] smpboot: CPU 2 is now offline
[26410.137741] IRQ 26: no longer affine to CPU3
[26410.138775] smpboot: CPU 3 is now offline
[26410.154761] smpboot: CPU 4 is now offline
[26410.167641] IRQ 16: no longer affine to CPU5
[26410.167651] IRQ 28: no longer affine to CPU5
[26410.168687] smpboot: CPU 5 is now offline
[26410.184697] smpboot: CPU 6 is now offline
[26410.194516] IRQ 23: no longer affine to CPU7
[26410.195576] smpboot: CPU 7 is now offline
[26410.199139] ACPI: Low-level resume complete
[26410.199244] ACPI: EC: EC started
[26410.199246] PM: Restoring platform NVS memory
[26410.199758] Enabling non-boot CPUs ...
[26410.199896] x86: Booting SMP configuration:
[26410.199898] smpboot: Booting Node 0 Processor 1 APIC 0x1
[26410.200983] Disabled fast string operations
[26410.203457]  cache: parent cpu1 should not be sleeping
[26410.204083] CPU1 is up
[26410.204173] smpboot: Booting Node 0 Processor 2 APIC 0x2
[26410.205036] Disabled fast string operations
[26410.207479]  cache: parent cpu2 should not be sleeping
[26410.208133] CPU2 is up
[26410.208225] smpboot: Booting Node 0 Processor 3 APIC 0x3
[26410.209088] Disabled fast string operations
[26410.211487]  cache: parent cpu3 should not be sleeping
[26410.212133] CPU3 is up
[26410.212300] smpboot: Booting Node 0 Processor 4 APIC 0x4
[26410.212654] Disabled fast string operations
[26410.214980]  cache: parent cpu4 should not be sleeping
[26410.215751] CPU4 is up
[26410.215822] smpboot: Booting Node 0 Processor 5 APIC 0x5
[26410.216676] Disabled fast string operations
[26410.218989]  cache: parent cpu5 should not be sleeping
[26410.219779] CPU5 is up
[26410.219845] smpboot: Booting Node 0 Processor 6 APIC 0x6
[26410.220706] Disabled fast string operations
[26410.223037]  cache: parent cpu6 should not be sleeping
[26410.223888] CPU6 is up
[26410.223954] smpboot: Booting Node 0 Processor 7 APIC 0x7
[26410.224816] Disabled fast string operations
[26410.227120]  cache: parent cpu7 should not be sleeping
[26410.227971] CPU7 is up
[26410.236863] ACPI: Waking up from system sleep state S3
[26410.253502] ACPI: EC: interrupt unblocked
[26410.265868] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[26410.278834] ACPI: button: The lid device is not compliant to SW_LID.
[26410.278866] ACPI: EC: event unblocked
[26410.288652] sd 0:0:0:0: [sda] Starting disk
[26410.504374] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[26410.504416] usb 2-1.4: reset high-speed USB device number 14 using ehci-pci
[26410.582552] usb 2-1.4: device firmware changed
[26410.605992] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[26410.606128] ata4: SATA link down (SStatus 0 SControl 300)
[26410.606195] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[26410.606301] ata5: SATA link down (SStatus 0 SControl 300)
[26410.609631] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[26410.609638] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[26410.609644] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26410.610041] ata1.00: supports DRM functions and may not be fully accessible
[26410.610663] ata1.00: NCQ Send/Recv Log not supported
[26410.613004] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[26410.613011] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[26410.613017] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26410.613335] ata1.00: supports DRM functions and may not be fully accessible
[26410.613841] ata1.00: NCQ Send/Recv Log not supported
[26410.614511] ata1.00: configured for UDMA/133
[26410.832369] firewire_core 0000:0d:00.3: rediscovered device fw0
[26410.873042] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[26411.019356] OOM killer enabled.
[26411.019358] Restarting tasks ... 
[26411.019399] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[26411.021456] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[26411.021469] ata2: ACPI event
[26411.021483] ata2: SError: { PHYRdyChg }
[26411.025183] usb 2-1.4: USB disconnect, device number 14
[26411.025663] done.
[26411.027681] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[26411.031565] ata2: hard resetting link
[26411.043001] video LNXVIDEO:00: Restoring backlight state
[26411.043898] PM: suspend exit
[26411.073987] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[26411.112454] usb 2-1.4: new high-speed USB device number 15 using ehci-pci
[26411.192169] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[26411.192176] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[26411.192181] usb 2-1.4: Product: 㕆㈵朱w
[26411.192185] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[26411.239206] usbhid 2-1.4:1.0: can't add hid device: -71
[26411.239237] usbhid: probe of 2-1.4:1.0 failed with error -71
[26411.289226] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[26411.292695] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26411.298804] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[26411.304763] usb 2-1.4: USB disconnect, device number 15
[26411.537056] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[26411.617019] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26411.753262] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[26411.781625] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26411.802317] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[26411.803093] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[26411.803097] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26411.804837] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[26411.818420] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[26411.819343] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[26411.819346] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26411.821032] ata2.00: configured for UDMA/100
[26411.825854] ata2: EH complete
[26412.059293] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[26412.117490] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[26412.117857] sr 1:0:0:0: Attached scsi CD-ROM sr0
[26412.118051] sr 1:0:0:0: Attached scsi generic sg1 type 5
[26412.244306] usb 2-1.4: new high-speed USB device number 16 using ehci-pci
[26412.329524] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[26412.329531] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26412.329536] usb 2-1.4: Product: F5521gw
[26412.329540] usb 2-1.4: Manufacturer: Lenovo
[26412.329544] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[26412.364057] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[26412.365449] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[26412.367161] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[26412.396387] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[26412.396909] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[26412.397750] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[26412.398250] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[26412.947069] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[26414.489564] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[26414.491561] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[26414.920935] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[26414.923613] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[26414.989347] wlp3s0: authenticated
[26414.990199] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[26414.991574] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[26414.995738] wlp3s0: associated
[26415.047618] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[26415.090530] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[26547.952913] e1000e: enp0s25 NIC Link is Down
[26547.972542] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[26548.114865] PM: suspend entry (deep)
[26548.114868] PM: Syncing filesystems ... done.
[26548.150477] Freezing user space processes ... (elapsed 0.003 seconds) done.
[26548.153847] OOM killer disabled.
[26548.153849] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[26548.155485] Suspending console(s) (use no_console_suspend to debug)
[26548.348462] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[26548.349740] sd 0:0:0:0: [sda] Stopping disk
[26548.393914] e1000e: EEE TX LPI TIMER: 00000011
[26548.658967] ACPI: EC: interrupt blocked
[26548.686079] ACPI: Preparing to enter system sleep state S3
[26548.695505] ACPI: EC: event blocked
[26548.695506] ACPI: EC: EC stopped
[26548.695507] PM: Saving platform NVS memory
[26548.695534] Disabling non-boot CPUs ...
[26548.706330] IRQ 24: no longer affine to CPU1
[26548.707368] smpboot: CPU 1 is now offline
[26548.723235] smpboot: CPU 2 is now offline
[26548.738102] IRQ 16: no longer affine to CPU3
[26548.738113] IRQ 26: no longer affine to CPU3
[26548.739153] smpboot: CPU 3 is now offline
[26548.755238] smpboot: CPU 4 is now offline
[26548.767048] IRQ 23: no longer affine to CPU5
[26548.768091] smpboot: CPU 5 is now offline
[26548.780074] smpboot: CPU 6 is now offline
[26548.789906] IRQ 28: no longer affine to CPU7
[26548.790950] smpboot: CPU 7 is now offline
[26548.794473] ACPI: Low-level resume complete
[26548.794582] ACPI: EC: EC started
[26548.794584] PM: Restoring platform NVS memory
[26548.795055] Enabling non-boot CPUs ...
[26548.795204] x86: Booting SMP configuration:
[26548.795206] smpboot: Booting Node 0 Processor 1 APIC 0x1
[26548.796313] Disabled fast string operations
[26548.798870]  cache: parent cpu1 should not be sleeping
[26548.799501] CPU1 is up
[26548.799580] smpboot: Booting Node 0 Processor 2 APIC 0x2
[26548.800442] Disabled fast string operations
[26548.802968]  cache: parent cpu2 should not be sleeping
[26548.803619] CPU2 is up
[26548.803738] smpboot: Booting Node 0 Processor 3 APIC 0x3
[26548.804597] Disabled fast string operations
[26548.807079]  cache: parent cpu3 should not be sleeping
[26548.807763] CPU3 is up
[26548.807833] smpboot: Booting Node 0 Processor 4 APIC 0x4
[26548.808696] Disabled fast string operations
[26548.811169]  cache: parent cpu4 should not be sleeping
[26548.811926] CPU4 is up
[26548.811992] smpboot: Booting Node 0 Processor 5 APIC 0x5
[26548.812844] Disabled fast string operations
[26548.815229]  cache: parent cpu5 should not be sleeping
[26548.815982] CPU5 is up
[26548.816053] smpboot: Booting Node 0 Processor 6 APIC 0x6
[26548.816908] Disabled fast string operations
[26548.819333]  cache: parent cpu6 should not be sleeping
[26548.820170] CPU6 is up
[26548.820235] smpboot: Booting Node 0 Processor 7 APIC 0x7
[26548.821093] Disabled fast string operations
[26548.823477]  cache: parent cpu7 should not be sleeping
[26548.824330] CPU7 is up
[26548.833240] ACPI: Waking up from system sleep state S3
[26548.848985] ACPI: EC: interrupt unblocked
[26548.861951] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[26548.875299] ACPI: EC: event unblocked
[26548.885191] sd 0:0:0:0: [sda] Starting disk
[26549.102755] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[26549.102773] usb 2-1.4: reset high-speed USB device number 16 using ehci-pci
[26549.180929] usb 2-1.4: device firmware changed
[26549.204445] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[26549.204511] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[26549.204627] ata4: SATA link down (SStatus 0 SControl 300)
[26549.204705] ata5: SATA link down (SStatus 0 SControl 300)
[26549.207966] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[26549.207973] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[26549.207979] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26549.208382] ata1.00: supports DRM functions and may not be fully accessible
[26549.209001] ata1.00: NCQ Send/Recv Log not supported
[26549.211082] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[26549.211089] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[26549.211095] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26549.211253] ata1.00: supports DRM functions and may not be fully accessible
[26549.211642] ata1.00: NCQ Send/Recv Log not supported
[26549.212087] ata1.00: configured for UDMA/133
[26549.403122] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[26549.404002] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[26549.404009] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26549.419986] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[26549.420936] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[26549.420943] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[26549.422839] ata2.00: configured for UDMA/100
[26549.430771] firewire_core 0000:0d:00.3: rediscovered device fw0
[26549.469531] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[26549.909152] OOM killer enabled.
[26549.909156] Restarting tasks ... 
[26549.910458] usb 2-1.4: USB disconnect, device number 16
[26549.911009] done.
[26549.917013] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[26549.926050] video LNXVIDEO:00: Restoring backlight state
[26549.926926] PM: suspend exit
[26549.953088] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[26549.997796] usb 2-1.4: new high-speed USB device number 17 using ehci-pci
[26550.077537] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[26550.077545] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[26550.077550] usb 2-1.4: Product: 㕆㈵朱w
[26550.077554] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[26550.126128] usbhid 2-1.4:1.0: can't add hid device: -71
[26550.126148] usbhid: probe of 2-1.4:1.0 failed with error -71
[26550.157370] usb 2-1.4: USB disconnect, device number 17
[26550.167061] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[26550.168375] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26550.174015] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[26550.410966] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[26550.491548] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26550.659456] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26551.097686] usb 2-1.4: new high-speed USB device number 18 using ehci-pci
[26551.183852] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[26551.183861] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26551.183865] usb 2-1.4: Product: F5521gw
[26551.183870] usb 2-1.4: Manufacturer: Lenovo
[26551.183873] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[26551.216280] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[26551.217890] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[26551.219826] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[26551.250890] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[26551.251856] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[26551.253221] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[26551.253911] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[26551.817214] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[26553.363230] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[26553.365222] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[26553.791907] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[26553.794128] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[26553.860628] wlp3s0: authenticated
[26553.861551] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[26553.863168] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[26553.867334] wlp3s0: associated
[26553.898026] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[26553.961019] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[37371.532619] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[37371.532632] ata2.00: waking up from sleep
[37371.532641] ata2: SError: { CommWake }
[37371.532652] ata2: hard resetting link
[37371.840526] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[37371.844352] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[37371.844691] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[37371.844699] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[37371.850059] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[37371.850377] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[37371.850383] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[37371.852133] ata2.00: configured for UDMA/100
[37371.852932] ata2: EH complete
[37376.896490] ata2.00: disabled
[37376.898063] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[40970.655377] e1000e: enp0s25 NIC Link is Down
[40970.678186] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[40970.952950] PM: suspend entry (deep)
[40970.952953] PM: Syncing filesystems ... done.
[40970.966775] Freezing user space processes ... (elapsed 0.002 seconds) done.
[40970.969173] OOM killer disabled.
[40970.969174] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[40970.970598] Suspending console(s) (use no_console_suspend to debug)
[40971.137451] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[40971.140487] sd 0:0:0:0: [sda] Stopping disk
[40971.186154] e1000e: EEE TX LPI TIMER: 00000011
[40971.341777] ACPI: EC: interrupt blocked
[40971.368033] ACPI: Preparing to enter system sleep state S3
[40971.376344] ACPI: EC: event blocked
[40971.376345] ACPI: EC: EC stopped
[40971.376347] PM: Saving platform NVS memory
[40971.376369] Disabling non-boot CPUs ...
[40971.387193] NOHZ: local_softirq_pending 202
[40971.387222] NOHZ: local_softirq_pending 202
[40971.387280] IRQ 24: no longer affine to CPU1
[40971.388308] smpboot: CPU 1 is now offline
[40971.404200] NOHZ: local_softirq_pending 202
[40971.404224] NOHZ: local_softirq_pending 202
[40971.405296] smpboot: CPU 2 is now offline
[40971.427118] IRQ 16: no longer affine to CPU3
[40971.427128] IRQ 26: no longer affine to CPU3
[40971.428855] smpboot: CPU 3 is now offline
[40971.448131] smpboot: CPU 4 is now offline
[40971.457974] IRQ 23: no longer affine to CPU5
[40971.459020] smpboot: CPU 5 is now offline
[40971.466096] smpboot: CPU 6 is now offline
[40971.477919] IRQ 28: no longer affine to CPU7
[40971.478960] smpboot: CPU 7 is now offline
[40971.482511] ACPI: Low-level resume complete
[40971.482617] ACPI: EC: EC started
[40971.482619] PM: Restoring platform NVS memory
[40971.483119] Enabling non-boot CPUs ...
[40971.483257] x86: Booting SMP configuration:
[40971.483260] smpboot: Booting Node 0 Processor 1 APIC 0x1
[40971.484336] Disabled fast string operations
[40971.486785]  cache: parent cpu1 should not be sleeping
[40971.487400] CPU1 is up
[40971.487489] smpboot: Booting Node 0 Processor 2 APIC 0x2
[40971.488348] Disabled fast string operations
[40971.490780]  cache: parent cpu2 should not be sleeping
[40971.491415] CPU2 is up
[40971.491506] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40971.492368] Disabled fast string operations
[40971.494757]  cache: parent cpu3 should not be sleeping
[40971.495416] CPU3 is up
[40971.495533] smpboot: Booting Node 0 Processor 4 APIC 0x4
[40971.496420] Disabled fast string operations
[40971.498764]  cache: parent cpu4 should not be sleeping
[40971.499511] CPU4 is up
[40971.499579] smpboot: Booting Node 0 Processor 5 APIC 0x5
[40971.500435] Disabled fast string operations
[40971.502746]  cache: parent cpu5 should not be sleeping
[40971.503497] CPU5 is up
[40971.503563] smpboot: Booting Node 0 Processor 6 APIC 0x6
[40971.504420] Disabled fast string operations
[40971.506775]  cache: parent cpu6 should not be sleeping
[40971.507611] CPU6 is up
[40971.507704] smpboot: Booting Node 0 Processor 7 APIC 0x7
[40971.508547] Disabled fast string operations
[40971.510868]  cache: parent cpu7 should not be sleeping
[40971.511702] CPU7 is up
[40971.520366] ACPI: Waking up from system sleep state S3
[40971.535588] ACPI: EC: interrupt unblocked
[40971.548096] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[40971.560366] ACPI: EC: event unblocked
[40971.560764] sd 0:0:0:0: [sda] Starting disk
[40971.784739] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[40971.785743] usb 2-1.4: reset high-speed USB device number 18 using ehci-pci
[40971.863941] usb 2-1.4: device firmware changed
[40971.878069] ata4: SATA link down (SStatus 0 SControl 300)
[40971.878349] ata5: SATA link down (SStatus 0 SControl 300)
[40971.878595] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[40971.878690] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[40971.881940] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40971.881948] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40971.881954] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[40971.882149] ata1.00: supports DRM functions and may not be fully accessible
[40971.882610] ata1.00: NCQ Send/Recv Log not supported
[40971.884739] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40971.884746] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40971.884752] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[40971.884980] ata1.00: supports DRM functions and may not be fully accessible
[40971.885430] ata1.00: NCQ Send/Recv Log not supported
[40971.886006] ata1.00: configured for UDMA/133
[40972.112745] firewire_core 0000:0d:00.3: rediscovered device fw0
[40972.148900] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[40972.288309] OOM killer enabled.
[40972.288313] Restarting tasks ... 
[40972.288321] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[40972.289005] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[40972.289015] ata2: ACPI event
[40972.289024] ata2: SError: { PHYRdyChg }
[40972.291728] done.
[40972.295585] usb 2-1.4: USB disconnect, device number 18
[40972.298267] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[40972.299102] ata2: hard resetting link
[40972.309923] video LNXVIDEO:00: Restoring backlight state
[40972.310774] PM: suspend exit
[40972.338126] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[40972.377659] usb 2-1.4: new high-speed USB device number 19 using ehci-pci
[40972.457245] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[40972.457252] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[40972.457256] usb 2-1.4: Product: 㕆㈵朱w
[40972.457259] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[40972.504218] usbhid 2-1.4:1.0: can't add hid device: -71
[40972.504229] usbhid: probe of 2-1.4:1.0 failed with error -71
[40972.552968] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[40972.554401] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[40972.560062] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[40972.586531] usb 2-1.4: USB disconnect, device number 19
[40972.796192] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[40972.874031] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[40973.000353] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[40973.017667] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[40973.083265] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[40973.084059] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[40973.084062] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[40973.085797] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[40973.100293] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[40973.101330] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[40973.101336] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[40973.103195] ata2.00: configured for UDMA/100
[40973.339269] ata2: EH complete
[40973.345874] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[40973.397051] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[40973.397569] sr 1:0:0:0: Attached scsi CD-ROM sr0
[40973.397670] sr 1:0:0:0: Attached scsi generic sg1 type 5
[40973.527740] usb 2-1.4: new high-speed USB device number 20 using ehci-pci
[40973.614395] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[40973.614402] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[40973.614406] usb 2-1.4: Product: F5521gw
[40973.614410] usb 2-1.4: Manufacturer: Lenovo
[40973.614414] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[40973.648042] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[40973.648892] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[40973.650953] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[40973.682627] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[40973.683334] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[40973.684433] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[40973.684914] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[40974.241337] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[40975.783234] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[40975.795270] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[40976.142871] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[40976.145836] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[40976.202193] wlp3s0: authenticated
[40976.203640] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[40976.205176] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[40976.210052] wlp3s0: associated
[40976.238612] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[40976.303287] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[49709.053358] e1000e: enp0s25 NIC Link is Down
[49709.078287] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[49709.362569] PM: suspend entry (deep)
[49709.362579] PM: Syncing filesystems ... done.
[49709.374443] Freezing user space processes ... (elapsed 0.003 seconds) done.
[49709.377548] OOM killer disabled.
[49709.377549] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[49709.378768] Suspending console(s) (use no_console_suspend to debug)
[49709.549640] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[49709.550853] sd 0:0:0:0: [sda] Stopping disk
[49709.593315] e1000e: EEE TX LPI TIMER: 00000011
[49709.741056] ACPI: EC: interrupt blocked
[49709.767314] ACPI: Preparing to enter system sleep state S3
[49709.775420] ACPI: EC: event blocked
[49709.775422] ACPI: EC: EC stopped
[49709.775423] PM: Saving platform NVS memory
[49709.775449] Disabling non-boot CPUs ...
[49709.786518] NOHZ: local_softirq_pending 202
[49709.786576] IRQ 24: no longer affine to CPU1
[49709.787597] smpboot: CPU 1 is now offline
[49709.812095] smpboot: CPU 2 is now offline
[49709.834357] IRQ 16: no longer affine to CPU3
[49709.834377] IRQ 26: no longer affine to CPU3
[49709.835410] smpboot: CPU 3 is now offline
[49709.856253] smpboot: CPU 4 is now offline
[49709.871325] IRQ 23: no longer affine to CPU5
[49709.872366] smpboot: CPU 5 is now offline
[49709.888380] smpboot: CPU 6 is now offline
[49709.897190] IRQ 28: no longer affine to CPU7
[49709.898237] smpboot: CPU 7 is now offline
[49709.901722] ACPI: Low-level resume complete
[49709.901830] ACPI: EC: EC started
[49709.901832] PM: Restoring platform NVS memory
[49709.902386] Enabling non-boot CPUs ...
[49709.902551] x86: Booting SMP configuration:
[49709.902554] smpboot: Booting Node 0 Processor 1 APIC 0x1
[49709.903642] Disabled fast string operations
[49709.906113]  cache: parent cpu1 should not be sleeping
[49709.906741] CPU1 is up
[49709.906816] smpboot: Booting Node 0 Processor 2 APIC 0x2
[49709.907676] Disabled fast string operations
[49709.910080]  cache: parent cpu2 should not be sleeping
[49709.910740] CPU2 is up
[49709.910823] smpboot: Booting Node 0 Processor 3 APIC 0x3
[49709.911686] Disabled fast string operations
[49709.914084]  cache: parent cpu3 should not be sleeping
[49709.914736] CPU3 is up
[49709.914803] smpboot: Booting Node 0 Processor 4 APIC 0x4
[49709.915657] Disabled fast string operations
[49709.918000]  cache: parent cpu4 should not be sleeping
[49709.918743] CPU4 is up
[49709.918814] smpboot: Booting Node 0 Processor 5 APIC 0x5
[49709.919669] Disabled fast string operations
[49709.921996]  cache: parent cpu5 should not be sleeping
[49709.922750] CPU5 is up
[49709.922820] smpboot: Booting Node 0 Processor 6 APIC 0x6
[49709.923677] Disabled fast string operations
[49709.926030]  cache: parent cpu6 should not be sleeping
[49709.926854] CPU6 is up
[49709.926914] smpboot: Booting Node 0 Processor 7 APIC 0x7
[49709.927764] Disabled fast string operations
[49709.930083]  cache: parent cpu7 should not be sleeping
[49709.930905] CPU7 is up
[49709.939787] ACPI: Waking up from system sleep state S3
[49709.954410] ACPI: EC: interrupt unblocked
[49709.967419] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[49709.980645] ACPI: EC: event unblocked
[49709.981136] sd 0:0:0:0: [sda] Starting disk
[49710.203088] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[49710.203111] usb 2-1.4: reset high-speed USB device number 20 using ehci-pci
[49710.281172] usb 2-1.4: device firmware changed
[49710.296604] ata5: SATA link down (SStatus 0 SControl 300)
[49710.296799] ata4: SATA link down (SStatus 0 SControl 300)
[49710.296901] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[49710.296937] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[49710.301338] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[49710.301346] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[49710.301351] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[49710.301576] ata1.00: supports DRM functions and may not be fully accessible
[49710.302038] ata1.00: NCQ Send/Recv Log not supported
[49710.304253] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[49710.304261] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[49710.304267] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[49710.304427] ata1.00: supports DRM functions and may not be fully accessible
[49710.304792] ata1.00: NCQ Send/Recv Log not supported
[49710.305223] ata1.00: configured for UDMA/133
[49710.513438] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[49710.514307] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[49710.514315] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[49710.530385] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[49710.531347] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[49710.531354] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[49710.533232] ata2.00: configured for UDMA/100
[49710.539031] firewire_core 0000:0d:00.3: rediscovered device fw0
[49710.567362] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[49711.019365] OOM killer enabled.
[49711.019369] Restarting tasks ... done.
[49711.025752] usb 2-1.4: USB disconnect, device number 20
[49711.027762] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[49711.043666] video LNXVIDEO:00: Restoring backlight state
[49711.044378] PM: suspend exit
[49711.070135] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[49711.108979] usb 2-1.4: new high-speed USB device number 21 using ehci-pci
[49711.189013] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[49711.189020] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[49711.189035] usb 2-1.4: Product: 㕆㈵朱w
[49711.189039] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[49711.237446] usbhid 2-1.4:1.0: can't add hid device: -71
[49711.237476] usbhid: probe of 2-1.4:1.0 failed with error -71
[49711.262648] usb 2-1.4: USB disconnect, device number 21
[49711.283334] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[49711.284568] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[49711.290285] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[49711.526352] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[49711.604345] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[49711.741175] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[49712.202996] usb 2-1.4: new high-speed USB device number 22 using ehci-pci
[49712.289553] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[49712.289561] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[49712.289565] usb 2-1.4: Product: F5521gw
[49712.289569] usb 2-1.4: Manufacturer: Lenovo
[49712.289573] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[49712.324287] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[49712.325591] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[49712.327116] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[49712.357675] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[49712.358637] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[49712.359843] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[49712.360520] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[49712.912604] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[49712.912610] ata2.00: waking up from sleep
[49712.912614] ata2: SError: { CommWake }
[49712.912620] ata2: hard resetting link
[49712.912882] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[49713.224660] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[49713.227826] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[49713.228182] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[49713.228185] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[49713.232970] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[49713.233304] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[49713.233307] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[49713.235030] ata2.00: configured for UDMA/100
[49713.237079] ata2: EH complete
[49714.462525] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[49714.464516] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[49714.904982] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[49714.907400] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[49714.966634] wlp3s0: authenticated
[49714.967946] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[49714.969196] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[49714.973326] wlp3s0: associated
[49715.014198] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[49715.066945] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[49718.282983] ata2.00: disabled
[49718.283298] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[57181.673136] e1000e: enp0s25 NIC Link is Down
[57181.699166] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[57181.842546] PM: suspend entry (deep)
[57181.842550] PM: Syncing filesystems ... done.
[57181.861813] Freezing user space processes ... (elapsed 0.002 seconds) done.
[57181.864820] OOM killer disabled.
[57181.864822] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[57181.866146] Suspending console(s) (use no_console_suspend to debug)
[57182.060169] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57182.063182] sd 0:0:0:0: [sda] Stopping disk
[57182.106486] e1000e: EEE TX LPI TIMER: 00000011
[57182.374606] ACPI: EC: interrupt blocked
[57182.400801] ACPI: Preparing to enter system sleep state S3
[57182.410252] ACPI: EC: event blocked
[57182.410253] ACPI: EC: EC stopped
[57182.410255] PM: Saving platform NVS memory
[57182.410282] Disabling non-boot CPUs ...
[57182.422583] smpboot: CPU 1 is now offline
[57182.442977] smpboot: CPU 2 is now offline
[57182.461875] smpboot: CPU 3 is now offline
[57182.485954] smpboot: CPU 4 is now offline
[57182.501807] smpboot: CPU 5 is now offline
[57182.508837] smpboot: CPU 6 is now offline
[57182.519695] smpboot: CPU 7 is now offline
[57182.522958] ACPI: Low-level resume complete
[57182.523069] ACPI: EC: EC started
[57182.523070] PM: Restoring platform NVS memory
[57182.523629] Enabling non-boot CPUs ...
[57182.523765] x86: Booting SMP configuration:
[57182.523768] smpboot: Booting Node 0 Processor 1 APIC 0x1
[57182.524868] Disabled fast string operations
[57182.527343]  cache: parent cpu1 should not be sleeping
[57182.527975] CPU1 is up
[57182.528065] smpboot: Booting Node 0 Processor 2 APIC 0x2
[57182.528927] Disabled fast string operations
[57182.531340]  cache: parent cpu2 should not be sleeping
[57182.531996] CPU2 is up
[57182.532089] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57182.532954] Disabled fast string operations
[57182.535360]  cache: parent cpu3 should not be sleeping
[57182.536024] CPU3 is up
[57182.536144] smpboot: Booting Node 0 Processor 4 APIC 0x4
[57182.536538] Disabled fast string operations
[57182.538873]  cache: parent cpu4 should not be sleeping
[57182.539630] CPU4 is up
[57182.539696] smpboot: Booting Node 0 Processor 5 APIC 0x5
[57182.540549] Disabled fast string operations
[57182.542858]  cache: parent cpu5 should not be sleeping
[57182.543621] CPU5 is up
[57182.543686] smpboot: Booting Node 0 Processor 6 APIC 0x6
[57182.544545] Disabled fast string operations
[57182.546891]  cache: parent cpu6 should not be sleeping
[57182.547725] CPU6 is up
[57182.547786] smpboot: Booting Node 0 Processor 7 APIC 0x7
[57182.548646] Disabled fast string operations
[57182.550949]  cache: parent cpu7 should not be sleeping
[57182.551801] CPU7 is up
[57182.560715] ACPI: Waking up from system sleep state S3
[57182.576875] ACPI: EC: interrupt unblocked
[57182.589372] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[57182.602690] ACPI: EC: event unblocked
[57182.612530] sd 0:0:0:0: [sda] Starting disk
[57182.823395] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[57182.823410] usb 2-1.4: reset high-speed USB device number 22 using ehci-pci
[57182.901691] usb 2-1.4: device firmware changed
[57182.925186] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57182.925268] ata4: SATA link down (SStatus 0 SControl 300)
[57182.925328] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[57182.928816] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[57182.928824] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[57182.928830] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[57182.929365] ata1.00: supports DRM functions and may not be fully accessible
[57182.930118] ata1.00: NCQ Send/Recv Log not supported
[57182.932591] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[57182.932624] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[57182.932630] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[57182.932941] ata1.00: supports DRM functions and may not be fully accessible
[57182.933138] ata5: SATA link down (SStatus 0 SControl 300)
[57182.933407] ata1.00: NCQ Send/Recv Log not supported
[57182.933986] ata1.00: configured for UDMA/133
[57183.159400] firewire_core 0000:0d:00.3: rediscovered device fw0
[57183.204117] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[57183.348205] OOM killer enabled.
[57183.348208] Restarting tasks ... 
[57183.348255] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[57183.349328] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[57183.349340] ata2: ACPI event
[57183.349363] ata2: SError: { PHYRdyChg }
[57183.350634] done.
[57183.352319] usb 2-1.4: USB disconnect, device number 22
[57183.356015] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[57183.359625] ata2: hard resetting link
[57183.367286] video LNXVIDEO:00: Restoring backlight state
[57183.368171] PM: suspend exit
[57183.397269] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[57183.440342] usb 2-1.4: new high-speed USB device number 23 using ehci-pci
[57183.520139] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[57183.520146] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[57183.520151] usb 2-1.4: Product: 㕆㈵朱w
[57183.520154] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[57183.567117] usbhid 2-1.4:1.0: can't add hid device: -71
[57183.567147] usbhid: probe of 2-1.4:1.0 failed with error -71
[57183.608336] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[57183.611615] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[57183.617867] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[57183.628895] usb 2-1.4: USB disconnect, device number 23
[57183.856070] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[57183.936220] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[57184.081356] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57184.129889] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[57184.130706] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[57184.130709] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[57184.132394] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[57184.145958] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[57184.146935] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[57184.146937] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[57184.148648] ata2.00: configured for UDMA/100
[57184.153413] ata2: EH complete
[57184.240716] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[57184.386732] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[57184.437289] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[57184.437801] sr 1:0:0:0: Attached scsi CD-ROM sr0
[57184.438123] sr 1:0:0:0: Attached scsi generic sg1 type 5
[57184.568501] usb 2-1.4: new high-speed USB device number 24 using ehci-pci
[57184.654634] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[57184.654642] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[57184.654646] usb 2-1.4: Product: F5521gw
[57184.654650] usb 2-1.4: Manufacturer: Lenovo
[57184.654653] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[57184.687091] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[57184.688076] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[57184.689843] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[57184.722569] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[57184.723296] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[57184.725031] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[57184.725549] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[57185.285928] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[57186.832648] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[57186.834575] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[57187.440857] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[57187.443941] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[57187.502516] wlp3s0: authenticated
[57187.503576] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[57187.505193] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[57187.509213] wlp3s0: associated
[57187.551156] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[57187.603382] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[69808.584335] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[69808.584349] ata2.00: waking up from sleep
[69808.584358] ata2: SError: { CommWake }
[69808.584369] ata2: hard resetting link
[69808.895279] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[69808.899304] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[69808.899779] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[69808.899788] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[69808.905482] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[69808.905853] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[69808.905860] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[69808.907611] ata2.00: configured for UDMA/100
[69808.908376] ata2: EH complete
[69813.953332] ata2.00: disabled
[69813.955562] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[70139.425288] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[70139.425300] ata2: irq_stat 0x000000c0, connection status changed
[70139.425309] ata2: SError: { CommWake DevExch }
[70139.435431] ata2: hard resetting link
[70139.840240] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[70140.151670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[70140.154545] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[70140.154869] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[70140.154872] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70140.156586] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[70140.160669] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[70140.161048] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[70140.161054] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70140.162878] ata2.00: configured for UDMA/100
[70140.165786] ata2: EH complete
[70140.167352] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[70140.219615] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[70140.219767] sr 1:0:0:0: Attached scsi CD-ROM sr0
[70140.219844] sr 1:0:0:0: Attached scsi generic sg1 type 5
[70884.299455] e1000e: enp0s25 NIC Link is Down
[70884.327488] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[70884.599555] PM: suspend entry (deep)
[70884.599557] PM: Syncing filesystems ... done.
[70884.611360] Freezing user space processes ... (elapsed 0.002 seconds) done.
[70884.613715] OOM killer disabled.
[70884.613717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[70884.614860] Suspending console(s) (use no_console_suspend to debug)
[70884.791776] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[70884.793155] sd 0:0:0:0: [sda] Stopping disk
[70884.838081] e1000e: EEE TX LPI TIMER: 00000011
[70885.108229] ACPI: EC: interrupt blocked
[70885.134462] ACPI: Preparing to enter system sleep state S3
[70885.143696] ACPI: EC: event blocked
[70885.143698] ACPI: EC: EC stopped
[70885.143699] PM: Saving platform NVS memory
[70885.143726] Disabling non-boot CPUs ...
[70885.154386] IRQ 24: no longer affine to CPU1
[70885.156149] smpboot: CPU 1 is now offline
[70885.175675] smpboot: CPU 2 is now offline
[70885.190520] IRQ 16: no longer affine to CPU3
[70885.190530] IRQ 26: no longer affine to CPU3
[70885.191565] smpboot: CPU 3 is now offline
[70885.207610] smpboot: CPU 4 is now offline
[70885.221433] IRQ 23: no longer affine to CPU5
[70885.222472] smpboot: CPU 5 is now offline
[70885.241520] smpboot: CPU 6 is now offline
[70885.250340] IRQ 28: no longer affine to CPU7
[70885.251393] smpboot: CPU 7 is now offline
[70885.254860] ACPI: Low-level resume complete
[70885.254969] ACPI: EC: EC started
[70885.254971] PM: Restoring platform NVS memory
[70885.255536] Enabling non-boot CPUs ...
[70885.255689] x86: Booting SMP configuration:
[70885.255691] smpboot: Booting Node 0 Processor 1 APIC 0x1
[70885.256761] Disabled fast string operations
[70885.259240]  cache: parent cpu1 should not be sleeping
[70885.259873] CPU1 is up
[70885.259949] smpboot: Booting Node 0 Processor 2 APIC 0x2
[70885.260811] Disabled fast string operations
[70885.263241]  cache: parent cpu2 should not be sleeping
[70885.263905] CPU2 is up
[70885.263990] smpboot: Booting Node 0 Processor 3 APIC 0x3
[70885.264853] Disabled fast string operations
[70885.267265]  cache: parent cpu3 should not be sleeping
[70885.267940] CPU3 is up
[70885.268008] smpboot: Booting Node 0 Processor 4 APIC 0x4
[70885.268871] Disabled fast string operations
[70885.271309]  cache: parent cpu4 should not be sleeping
[70885.272085] CPU4 is up
[70885.272165] smpboot: Booting Node 0 Processor 5 APIC 0x5
[70885.273008] Disabled fast string operations
[70885.275332]  cache: parent cpu5 should not be sleeping
[70885.276112] CPU5 is up
[70885.276178] smpboot: Booting Node 0 Processor 6 APIC 0x6
[70885.277020] Disabled fast string operations
[70885.279370]  cache: parent cpu6 should not be sleeping
[70885.280238] CPU6 is up
[70885.280306] smpboot: Booting Node 0 Processor 7 APIC 0x7
[70885.281184] Disabled fast string operations
[70885.283509]  cache: parent cpu7 should not be sleeping
[70885.284401] CPU7 is up
[70885.294456] ACPI: Waking up from system sleep state S3
[70885.308654] ACPI: EC: interrupt unblocked
[70885.320954] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[70885.333790] ACPI: EC: event unblocked
[70885.334336] sd 0:0:0:0: [sda] Starting disk
[70885.555235] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[70885.555244] usb 2-1.4: reset high-speed USB device number 24 using ehci-pci
[70885.633269] usb 2-1.4: device firmware changed
[70885.648769] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[70885.648806] ata5: SATA link down (SStatus 0 SControl 300)
[70885.648974] ata4: SATA link down (SStatus 0 SControl 300)
[70885.649011] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[70885.653372] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[70885.653379] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[70885.653385] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70885.653673] ata1.00: supports DRM functions and may not be fully accessible
[70885.654259] ata1.00: NCQ Send/Recv Log not supported
[70885.656460] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[70885.656466] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[70885.656472] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70885.656784] ata1.00: supports DRM functions and may not be fully accessible
[70885.657220] ata1.00: NCQ Send/Recv Log not supported
[70885.657779] ata1.00: configured for UDMA/133
[70885.862852] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[70885.863726] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[70885.863734] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70885.879650] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[70885.880641] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[70885.880647] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70885.882538] ata2.00: configured for UDMA/100
[70885.891153] firewire_core 0000:0d:00.3: rediscovered device fw0
[70885.914714] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[70886.368798] OOM killer enabled.
[70886.368801] Restarting tasks ... 
[70886.369123] usb 2-1.4: USB disconnect, device number 24
[70886.373682] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[70886.376043] done.
[70886.390747] video LNXVIDEO:00: Restoring backlight state
[70886.391615] PM: suspend exit
[70886.417412] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[70886.457055] usb 2-1.4: new high-speed USB device number 25 using ehci-pci
[70886.536695] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[70886.536702] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[70886.536706] usb 2-1.4: Product: 㕆㈵朱w
[70886.536709] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[70886.584988] usbhid 2-1.4:1.0: can't add hid device: -71
[70886.585020] usbhid: probe of 2-1.4:1.0 failed with error -71
[70886.616134] usb 2-1.4: USB disconnect, device number 25
[70886.627844] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[70886.631175] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[70886.637494] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[70886.875960] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[70886.956401] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[70887.129798] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[70887.556116] usb 2-1.4: new high-speed USB device number 26 using ehci-pci
[70887.642363] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[70887.642372] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[70887.642376] usb 2-1.4: Product: F5521gw
[70887.642380] usb 2-1.4: Manufacturer: Lenovo
[70887.642384] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[70887.676281] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[70887.677844] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[70887.679640] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[70887.710626] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[70887.711710] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[70887.712937] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[70887.713619] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[70888.280808] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[70888.329999] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[70888.330004] ata2.00: waking up from sleep
[70888.330007] ata2: SError: { CommWake }
[70888.330011] ata2: hard resetting link
[70888.640259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[70888.643339] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[70888.643697] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[70888.643704] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70888.648741] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[70888.649053] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[70888.649058] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[70888.650755] ata2.00: configured for UDMA/100
[70888.651775] ata2: EH complete
[70889.809524] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[70889.826519] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[70890.324240] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[70890.327088] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[70890.489571] wlp3s0: authenticated
[70890.491031] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[70890.494446] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[70890.499271] wlp3s0: associated
[70890.590437] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[70891.030927] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[70893.691032] ata2.00: disabled
[70893.693328] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[70973.138135] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[70980.308723] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[70980.355298] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[70980.358240] wlp3s0: authenticated
[70980.359244] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[70980.363102] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=1)
[70980.368340] wlp3s0: associated
[71337.219731] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[71337.219744] ata2: irq_stat 0x000000c0, connection status changed
[71337.219753] ata2: SError: { CommWake DevExch }
[71337.229887] ata2: hard resetting link
[71337.640659] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[71337.952231] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[71337.956100] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[71337.956581] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[71337.956589] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[71337.958429] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[71337.962419] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[71337.962869] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[71337.962878] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[71337.964723] ata2.00: configured for UDMA/100
[71337.967370] ata2: EH complete
[71337.969174] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[71338.022134] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[71338.022529] sr 1:0:0:0: Attached scsi CD-ROM sr0
[71338.022685] sr 1:0:0:0: Attached scsi generic sg1 type 5
[74284.466818] e1000e: enp0s25 NIC Link is Down
[74284.499165] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[74284.857156] PM: suspend entry (deep)
[74284.857160] PM: Syncing filesystems ... done.
[74284.874250] Freezing user space processes ... (elapsed 0.002 seconds) done.
[74284.877081] OOM killer disabled.
[74284.877083] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[74284.878614] Suspending console(s) (use no_console_suspend to debug)
[74285.053002] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[74285.054224] sd 0:0:0:0: [sda] Stopping disk
[74285.095598] e1000e: EEE TX LPI TIMER: 00000011
[74285.245297] ACPI: EC: interrupt blocked
[74285.271620] ACPI: Preparing to enter system sleep state S3
[74285.280073] ACPI: EC: event blocked
[74285.280074] ACPI: EC: EC stopped
[74285.280076] PM: Saving platform NVS memory
[74285.280101] Disabling non-boot CPUs ...
[74285.290927] IRQ 24: no longer affine to CPU1
[74285.291952] smpboot: CPU 1 is now offline
[74285.312782] NOHZ: local_softirq_pending 202
[74285.313869] smpboot: CPU 2 is now offline
[74285.331661] IRQ 26: no longer affine to CPU3
[74285.333392] smpboot: CPU 3 is now offline
[74285.351777] smpboot: CPU 4 is now offline
[74285.362611] IRQ 16: no longer affine to CPU5
[74285.362622] IRQ 28: no longer affine to CPU5
[74285.363658] smpboot: CPU 5 is now offline
[74285.371700] smpboot: CPU 6 is now offline
[74285.380489] IRQ 23: no longer affine to CPU7
[74285.381547] smpboot: CPU 7 is now offline
[74285.384986] ACPI: Low-level resume complete
[74285.385087] ACPI: EC: EC started
[74285.385088] PM: Restoring platform NVS memory
[74285.385656] Enabling non-boot CPUs ...
[74285.385791] x86: Booting SMP configuration:
[74285.385794] smpboot: Booting Node 0 Processor 1 APIC 0x1
[74285.386877] Disabled fast string operations
[74285.389346]  cache: parent cpu1 should not be sleeping
[74285.389989] CPU1 is up
[74285.390079] smpboot: Booting Node 0 Processor 2 APIC 0x2
[74285.390941] Disabled fast string operations
[74285.393387]  cache: parent cpu2 should not be sleeping
[74285.394055] CPU2 is up
[74285.394148] smpboot: Booting Node 0 Processor 3 APIC 0x3
[74285.395011] Disabled fast string operations
[74285.397396]  cache: parent cpu3 should not be sleeping
[74285.398066] CPU3 is up
[74285.398139] smpboot: Booting Node 0 Processor 4 APIC 0x4
[74285.399001] Disabled fast string operations
[74285.401453]  cache: parent cpu4 should not be sleeping
[74285.402210] CPU4 is up
[74285.402309] smpboot: Booting Node 0 Processor 5 APIC 0x5
[74285.403148] Disabled fast string operations
[74285.405470]  cache: parent cpu5 should not be sleeping
[74285.406256] CPU5 is up
[74285.406390] smpboot: Booting Node 0 Processor 6 APIC 0x6
[74285.406744] Disabled fast string operations
[74285.409071]  cache: parent cpu6 should not be sleeping
[74285.409919] CPU6 is up
[74285.409988] smpboot: Booting Node 0 Processor 7 APIC 0x7
[74285.410847] Disabled fast string operations
[74285.413158]  cache: parent cpu7 should not be sleeping
[74285.414034] CPU7 is up
[74285.422935] ACPI: Waking up from system sleep state S3
[74285.437621] ACPI: EC: interrupt unblocked
[74285.450620] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[74285.463612] ACPI: EC: event unblocked
[74285.464724] sd 0:0:0:0: [sda] Starting disk
[74285.685333] usb 2-1.4: reset high-speed USB device number 26 using ehci-pci
[74285.685354] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[74285.763526] usb 2-1.4: device firmware changed
[74285.779073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[74285.779107] ata4: SATA link down (SStatus 0 SControl 300)
[74285.779142] ata5: SATA link down (SStatus 0 SControl 300)
[74285.779336] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[74285.783766] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[74285.783774] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[74285.783779] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74285.784158] ata1.00: supports DRM functions and may not be fully accessible
[74285.784864] ata1.00: NCQ Send/Recv Log not supported
[74285.787175] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[74285.787182] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[74285.787189] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74285.787405] ata1.00: supports DRM functions and may not be fully accessible
[74285.787839] ata1.00: NCQ Send/Recv Log not supported
[74285.788378] ata1.00: configured for UDMA/133
[74285.996370] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[74285.997250] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[74285.997257] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74286.013180] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[74286.014170] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[74286.014177] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74286.015976] ata2.00: configured for UDMA/100
[74286.021318] firewire_core 0000:0d:00.3: rediscovered device fw0
[74286.050420] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[74286.502523] OOM killer enabled.
[74286.502526] Restarting tasks ... 
[74286.507440] usb 2-1.4: USB disconnect, device number 26
[74286.511865] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[74286.513156] done.
[74286.528656] video LNXVIDEO:00: Restoring backlight state
[74286.529478] PM: suspend exit
[74286.554663] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[74286.591232] usb 2-1.4: new high-speed USB device number 27 using ehci-pci
[74286.670815] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[74286.670821] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[74286.670825] usb 2-1.4: Product: 㕆㈵朱w
[74286.670829] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[74286.717884] usbhid 2-1.4:1.0: can't add hid device: -71
[74286.717915] usbhid: probe of 2-1.4:1.0 failed with error -71
[74286.745615] usb 2-1.4: USB disconnect, device number 27
[74286.765569] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[74286.766983] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[74286.772545] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[74287.008613] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[74287.099218] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[74287.243611] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[74287.685215] usb 2-1.4: new high-speed USB device number 28 using ehci-pci
[74287.771183] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[74287.771191] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[74287.771196] usb 2-1.4: Product: F5521gw
[74287.771200] usb 2-1.4: Manufacturer: Lenovo
[74287.771204] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[74287.806958] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[74287.808697] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[74287.810491] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[74287.839644] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[74287.840589] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[74287.841708] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[74287.842285] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[74288.411754] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[74288.419164] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[74288.419168] ata2.00: waking up from sleep
[74288.419172] ata2: SError: { CommWake }
[74288.419176] ata2: hard resetting link
[74288.730611] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[74288.733378] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[74288.733745] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[74288.733748] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74288.739102] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[74288.739431] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[74288.739434] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74288.741140] ata2.00: configured for UDMA/100
[74288.743162] ata2: EH complete
[74289.944409] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[74289.961323] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[74290.390919] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[74290.393205] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[74290.396015] wlp3s0: authenticated
[74290.397090] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[74290.400788] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=1)
[74290.404313] wlp3s0: associated
[74290.451391] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[74293.796114] ata2.00: disabled
[74293.797360] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[75744.657879] sd 6:0:0:0: [sdb] 60874752 512-byte logical blocks: (31.2 GB/29.0 GiB)
[75744.667096]  sdb: sdb1
[77672.921501] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[77678.245392] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[77678.277342] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[77678.304387] wlp3s0: authenticated
[77678.305539] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[77678.307083] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[77678.311685] wlp3s0: associated
[77678.405205] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[88835.494036] e1000e: enp0s25 NIC Link is Down
[88835.527754] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[88835.817861] PM: suspend entry (deep)
[88835.817864] PM: Syncing filesystems ... done.
[88835.832828] Freezing user space processes ... (elapsed 0.003 seconds) done.
[88835.835931] OOM killer disabled.
[88835.835933] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[88835.837546] Suspending console(s) (use no_console_suspend to debug)
[88836.004883] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[88836.006086] sd 0:0:0:0: [sda] Stopping disk
[88836.051070] e1000e: EEE TX LPI TIMER: 00000011
[88836.235253] ACPI: EC: interrupt blocked
[88836.260575] ACPI: Preparing to enter system sleep state S3
[88836.268671] ACPI: EC: event blocked
[88836.268672] ACPI: EC: EC stopped
[88836.268674] PM: Saving platform NVS memory
[88836.268700] Disabling non-boot CPUs ...
[88836.279834] IRQ 24: no longer affine to CPU1
[88836.280853] smpboot: CPU 1 is now offline
[88836.304800] smpboot: CPU 2 is now offline
[88836.319638] IRQ 26: no longer affine to CPU3
[88836.320681] smpboot: CPU 3 is now offline
[88836.341716] smpboot: CPU 4 is now offline
[88836.356566] IRQ 16: no longer affine to CPU5
[88836.356577] IRQ 28: no longer affine to CPU5
[88836.357612] smpboot: CPU 5 is now offline
[88836.376633] smpboot: CPU 6 is now offline
[88836.385444] IRQ 23: no longer affine to CPU7
[88836.386496] smpboot: CPU 7 is now offline
[88836.389966] ACPI: Low-level resume complete
[88836.390075] ACPI: EC: EC started
[88836.390077] PM: Restoring platform NVS memory
[88836.390647] Enabling non-boot CPUs ...
[88836.390798] x86: Booting SMP configuration:
[88836.390801] smpboot: Booting Node 0 Processor 1 APIC 0x1
[88836.391878] Disabled fast string operations
[88836.394347]  cache: parent cpu1 should not be sleeping
[88836.394977] CPU1 is up
[88836.395051] smpboot: Booting Node 0 Processor 2 APIC 0x2
[88836.395913] Disabled fast string operations
[88836.398355]  cache: parent cpu2 should not be sleeping
[88836.399024] CPU2 is up
[88836.399111] smpboot: Booting Node 0 Processor 3 APIC 0x3
[88836.399975] Disabled fast string operations
[88836.402379]  cache: parent cpu3 should not be sleeping
[88836.403045] CPU3 is up
[88836.403112] smpboot: Booting Node 0 Processor 4 APIC 0x4
[88836.403975] Disabled fast string operations
[88836.406425]  cache: parent cpu4 should not be sleeping
[88836.407174] CPU4 is up
[88836.407287] smpboot: Booting Node 0 Processor 5 APIC 0x5
[88836.408140] Disabled fast string operations
[88836.410455]  cache: parent cpu5 should not be sleeping
[88836.411225] CPU5 is up
[88836.411295] smpboot: Booting Node 0 Processor 6 APIC 0x6
[88836.412140] Disabled fast string operations
[88836.414542]  cache: parent cpu6 should not be sleeping
[88836.415399] CPU6 is up
[88836.415463] smpboot: Booting Node 0 Processor 7 APIC 0x7
[88836.416337] Disabled fast string operations
[88836.418664]  cache: parent cpu7 should not be sleeping
[88836.419525] CPU7 is up
[88836.429577] ACPI: Waking up from system sleep state S3
[88836.444568] ACPI: EC: interrupt unblocked
[88836.456874] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[88836.469850] ACPI: EC: event unblocked
[88836.471412] sd 0:0:0:0: [sda] Starting disk
[88836.696311] usb 2-1.4: reset high-speed USB device number 28 using ehci-pci
[88836.696317] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[88836.774440] usb 2-1.4: device firmware changed
[88836.782035] ata4: SATA link down (SStatus 0 SControl 300)
[88836.782237] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88836.782310] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[88836.785747] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[88836.785755] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[88836.785761] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[88836.786074] ata1.00: supports DRM functions and may not be fully accessible
[88836.786584] ata1.00: NCQ Send/Recv Log not supported
[88836.788912] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[88836.788918] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[88836.788924] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[88836.789324] ata1.00: supports DRM functions and may not be fully accessible
[88836.789824] ata1.00: NCQ Send/Recv Log not supported
[88836.789959] ata5: SATA link down (SStatus 0 SControl 300)
[88836.790517] ata1.00: configured for UDMA/133
[88837.024283] firewire_core 0000:0d:00.3: rediscovered device fw0
[88837.058719] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[88837.196885] OOM killer enabled.
[88837.196888] Restarting tasks ... 
[88837.196945] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[88837.197298] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[88837.197313] ata2: ACPI event
[88837.197325] ata2: SError: { PHYRdyChg }
[88837.202706] done.
[88837.202764] usb 2-1.4: USB disconnect, device number 28
[88837.207405] ata2: hard resetting link
[88837.207573] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[88837.224306] video LNXVIDEO:00: Restoring backlight state
[88837.225596] PM: suspend exit
[88837.256717] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[88837.286194] usb 2-1.4: new high-speed USB device number 29 using ehci-pci
[88837.366941] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[88837.366948] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[88837.366952] usb 2-1.4: Product: 㕆㈵朱w
[88837.366955] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[88837.414159] usbhid 2-1.4:1.0: can't add hid device: -71
[88837.414210] usbhid: probe of 2-1.4:1.0 failed with error -71
[88837.464550] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[88837.466040] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[88837.471546] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[88837.495854] usb 2-1.4: USB disconnect, device number 29
[88837.707508] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[88837.785106] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[88837.900543] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[88837.931280] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[88837.994649] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[88837.995467] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[88837.995470] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[88837.997172] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[88838.010931] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[88838.011963] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[88838.011966] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[88838.013923] ata2.00: configured for UDMA/100
[88838.249923] ata2: EH complete
[88838.251784] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[88838.307709] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[88838.308206] sr 1:0:0:0: Attached scsi CD-ROM sr0
[88838.308486] sr 1:0:0:0: Attached scsi generic sg1 type 5
[88838.437189] usb 2-1.4: new high-speed USB device number 30 using ehci-pci
[88838.522477] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[88838.522484] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[88838.522489] usb 2-1.4: Product: F5521gw
[88838.522493] usb 2-1.4: Manufacturer: Lenovo
[88838.522497] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[88838.556250] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[88838.557661] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[88838.559150] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[88838.590265] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[88838.590864] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[88838.591788] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[88838.592221] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[88839.146752] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[88840.683676] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[88840.685671] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[88840.988567] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[88840.991440] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[88841.046356] wlp3s0: authenticated
[88841.047072] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[88841.048443] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[88841.052069] wlp3s0: associated
[88841.092628] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[88841.147355] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[95325.453075] sd 6:0:0:0: [sdb] 60874752 512-byte logical blocks: (31.2 GB/29.0 GiB)
[95325.460828]  sdb: sdb1
[95556.426904] e1000e: enp0s25 NIC Link is Down
[95556.456780] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[95556.810305] PM: suspend entry (deep)
[95556.810307] PM: Syncing filesystems ... done.
[95556.823629] Freezing user space processes ... (elapsed 0.002 seconds) done.
[95556.826022] OOM killer disabled.
[95556.826024] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[95556.827509] Suspending console(s) (use no_console_suspend to debug)
[95556.992463] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[95556.993740] sd 0:0:0:0: [sda] Stopping disk
[95557.039657] e1000e: EEE TX LPI TIMER: 00000011
[95557.205591] ACPI: EC: interrupt blocked
[95557.232131] ACPI: Preparing to enter system sleep state S3
[95557.240206] ACPI: EC: event blocked
[95557.240208] ACPI: EC: EC stopped
[95557.240210] PM: Saving platform NVS memory
[95557.240245] Disabling non-boot CPUs ...
[95557.251337] IRQ 24: no longer affine to CPU1
[95557.252357] smpboot: CPU 1 is now offline
[95557.276320] smpboot: CPU 2 is now offline
[95557.299145] IRQ 23: no longer affine to CPU3
[95557.299153] IRQ 26: no longer affine to CPU3
[95557.300202] smpboot: CPU 3 is now offline
[95557.320249] smpboot: CPU 4 is now offline
[95557.332058] IRQ 16: no longer affine to CPU5
[95557.332069] IRQ 28: no longer affine to CPU5
[95557.333106] smpboot: CPU 5 is now offline
[95557.354129] smpboot: CPU 6 is now offline
[95557.364008] smpboot: CPU 7 is now offline
[95557.367518] ACPI: Low-level resume complete
[95557.367623] ACPI: EC: EC started
[95557.367625] PM: Restoring platform NVS memory
[95557.368170] Enabling non-boot CPUs ...
[95557.368310] x86: Booting SMP configuration:
[95557.368313] smpboot: Booting Node 0 Processor 1 APIC 0x1
[95557.369396] Disabled fast string operations
[95557.371867]  cache: parent cpu1 should not be sleeping
[95557.372496] CPU1 is up
[95557.372587] smpboot: Booting Node 0 Processor 2 APIC 0x2
[95557.373448] Disabled fast string operations
[95557.375872]  cache: parent cpu2 should not be sleeping
[95557.376533] CPU2 is up
[95557.376627] smpboot: Booting Node 0 Processor 3 APIC 0x3
[95557.377490] Disabled fast string operations
[95557.379901]  cache: parent cpu3 should not be sleeping
[95557.380574] CPU3 is up
[95557.380747] smpboot: Booting Node 0 Processor 4 APIC 0x4
[95557.381611] Disabled fast string operations
[95557.384053]  cache: parent cpu4 should not be sleeping
[95557.384823] CPU4 is up
[95557.384894] smpboot: Booting Node 0 Processor 5 APIC 0x5
[95557.385748] Disabled fast string operations
[95557.388059]  cache: parent cpu5 should not be sleeping
[95557.388844] CPU5 is up
[95557.388911] smpboot: Booting Node 0 Processor 6 APIC 0x6
[95557.389767] Disabled fast string operations
[95557.392109]  cache: parent cpu6 should not be sleeping
[95557.392970] CPU6 is up
[95557.393035] smpboot: Booting Node 0 Processor 7 APIC 0x7
[95557.393912] Disabled fast string operations
[95557.396223]  cache: parent cpu7 should not be sleeping
[95557.397108] CPU7 is up
[95557.407176] ACPI: Waking up from system sleep state S3
[95557.421997] ACPI: EC: interrupt unblocked
[95557.434534] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[95557.447302] ACPI: EC: event unblocked
[95557.457121] sd 0:0:0:0: [sda] Starting disk
[95557.666833] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[95557.674804] usb 2-1.6: reset high-speed USB device number 4 using ehci-pci
[95557.776418] ata4: SATA link down (SStatus 0 SControl 300)
[95557.776679] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[95557.776760] ata5: SATA link down (SStatus 0 SControl 300)
[95557.776798] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[95557.781554] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95557.781561] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95557.781567] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95557.781972] ata1.00: supports DRM functions and may not be fully accessible
[95557.782455] ata1.00: NCQ Send/Recv Log not supported
[95557.784796] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[95557.784804] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[95557.784810] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95557.785117] ata1.00: supports DRM functions and may not be fully accessible
[95557.785592] ata1.00: NCQ Send/Recv Log not supported
[95557.786245] ata1.00: configured for UDMA/133
[95557.820836] usb 2-1.4: reset high-speed USB device number 30 using ehci-pci
[95557.899109] usb 2-1.4: device firmware changed
[95557.979388] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[95557.980270] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[95557.980278] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95557.996227] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[95557.997199] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[95557.997205] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95557.999091] ata2.00: configured for UDMA/100
[95558.002779] firewire_core 0000:0d:00.3: rediscovered device fw0
[95558.035194] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[95558.485423] OOM killer enabled.
[95558.485426] Restarting tasks ... 
[95558.485697] usb 2-1.4: USB disconnect, device number 30
[95558.487658] done.
[95558.490833] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[95558.503337] video LNXVIDEO:00: Restoring backlight state
[95558.504216] PM: suspend exit
[95558.531276] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95558.569710] usb 2-1.4: new high-speed USB device number 31 using ehci-pci
[95558.649350] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[95558.649354] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[95558.649357] usb 2-1.4: Product: 㕆㈵朱w
[95558.649359] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[95558.696178] usbhid 2-1.4:1.0: can't add hid device: -71
[95558.696194] usbhid: probe of 2-1.4:1.0 failed with error -71
[95558.729191] usb 2-1.4: USB disconnect, device number 31
[95558.739110] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[95558.740318] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95558.746059] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[95558.982121] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[95559.059520] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95559.187039] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[95559.669789] usb 2-1.4: new high-speed USB device number 32 using ehci-pci
[95559.756222] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[95559.756231] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[95559.756235] usb 2-1.4: Product: F5521gw
[95559.756239] usb 2-1.4: Manufacturer: Lenovo
[95559.756243] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[95559.789250] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[95559.790596] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[95559.792834] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[95559.823509] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[95559.824494] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[95559.826073] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[95559.826725] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[95560.367682] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[95560.367691] ata2.00: waking up from sleep
[95560.367698] ata2: SError: { CommWake }
[95560.367706] ata2: hard resetting link
[95560.391793] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[95560.672454] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[95560.675957] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[95560.676346] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[95560.676352] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95560.681698] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[95560.682086] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[95560.682093] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[95560.683989] ata2.00: configured for UDMA/100
[95560.684898] ata2: EH complete
[95561.937088] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[95561.940056] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[95562.355201] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[95562.357618] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[95562.419699] wlp3s0: authenticated
[95562.420710] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[95562.423084] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[95562.427913] wlp3s0: associated
[95562.468380] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[95562.520548] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[95565.726182] ata2.00: disabled
[95565.727509] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[98584.140410] e1000e: enp0s25 NIC Link is Down
[98584.174951] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[98584.479517] PM: suspend entry (deep)
[98584.479521] PM: Syncing filesystems ... done.
[98584.493238] Freezing user space processes ... (elapsed 0.003 seconds) done.
[98584.496646] OOM killer disabled.
[98584.496648] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[98584.498229] Suspending console(s) (use no_console_suspend to debug)
[98584.676471] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[98584.679420] sd 0:0:0:0: [sda] Stopping disk
[98584.720114] e1000e: EEE TX LPI TIMER: 00000011
[98584.987972] ACPI: EC: interrupt blocked
[98585.015080] ACPI: Preparing to enter system sleep state S3
[98585.023467] ACPI: EC: event blocked
[98585.023469] ACPI: EC: EC stopped
[98585.023470] PM: Saving platform NVS memory
[98585.023496] Disabling non-boot CPUs ...
[98585.034438] IRQ 24: no longer affine to CPU1
[98585.035473] smpboot: CPU 1 is now offline
[98585.050289] smpboot: CPU 2 is now offline
[98585.064143] IRQ 26: no longer affine to CPU3
[98585.065175] smpboot: CPU 3 is now offline
[98585.080333] smpboot: CPU 4 is now offline
[98585.100155] IRQ 16: no longer affine to CPU5
[98585.100166] IRQ 28: no longer affine to CPU5
[98585.101203] smpboot: CPU 5 is now offline
[98585.119216] smpboot: CPU 6 is now offline
[98585.129059] IRQ 23: no longer affine to CPU7
[98585.130122] smpboot: CPU 7 is now offline
[98585.133577] ACPI: Low-level resume complete
[98585.133685] ACPI: EC: EC started
[98585.133686] PM: Restoring platform NVS memory
[98585.134225] Enabling non-boot CPUs ...
[98585.134363] x86: Booting SMP configuration:
[98585.134366] smpboot: Booting Node 0 Processor 1 APIC 0x1
[98585.135445] Disabled fast string operations
[98585.137911]  cache: parent cpu1 should not be sleeping
[98585.138549] CPU1 is up
[98585.138624] smpboot: Booting Node 0 Processor 2 APIC 0x2
[98585.139482] Disabled fast string operations
[98585.141897]  cache: parent cpu2 should not be sleeping
[98585.142558] CPU2 is up
[98585.142648] smpboot: Booting Node 0 Processor 3 APIC 0x3
[98585.143512] Disabled fast string operations
[98585.145909]  cache: parent cpu3 should not be sleeping
[98585.146581] CPU3 is up
[98585.146650] smpboot: Booting Node 0 Processor 4 APIC 0x4
[98585.147513] Disabled fast string operations
[98585.149946]  cache: parent cpu4 should not be sleeping
[98585.150704] CPU4 is up
[98585.150810] smpboot: Booting Node 0 Processor 5 APIC 0x5
[98585.151671] Disabled fast string operations
[98585.154069]  cache: parent cpu5 should not be sleeping
[98585.154852] CPU5 is up
[98585.154918] smpboot: Booting Node 0 Processor 6 APIC 0x6
[98585.155759] Disabled fast string operations
[98585.158104]  cache: parent cpu6 should not be sleeping
[98585.158975] CPU6 is up
[98585.159049] smpboot: Booting Node 0 Processor 7 APIC 0x7
[98585.159906] Disabled fast string operations
[98585.162221]  cache: parent cpu7 should not be sleeping
[98585.163113] CPU7 is up
[98585.171993] ACPI: Waking up from system sleep state S3
[98585.189690] ACPI: EC: interrupt unblocked
[98585.202189] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[98585.214456] ACPI: EC: event unblocked
[98585.215477] sd 0:0:0:0: [sda] Starting disk
[98585.438907] usb 2-1.4: reset high-speed USB device number 32 using ehci-pci
[98585.438916] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[98585.517110] usb 2-1.4: device firmware changed
[98585.532806] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98585.532848] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[98585.532883] ata5: SATA link down (SStatus 0 SControl 300)
[98585.532917] ata4: SATA link down (SStatus 0 SControl 300)
[98585.536256] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[98585.536263] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[98585.536270] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[98585.536580] ata1.00: supports DRM functions and may not be fully accessible
[98585.537066] ata1.00: NCQ Send/Recv Log not supported
[98585.539718] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[98585.539726] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[98585.539732] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[98585.540150] ata1.00: supports DRM functions and may not be fully accessible
[98585.540588] ata1.00: NCQ Send/Recv Log not supported
[98585.541374] ata1.00: configured for UDMA/133
[98585.774874] firewire_core 0000:0d:00.3: rediscovered device fw0
[98585.820389] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[98585.964801] OOM killer enabled.
[98585.964804] Restarting tasks ... 
[98585.964823] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[98585.965193] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[98585.965220] ata2: ACPI event
[98585.965230] ata2: SError: { PHYRdyChg }
[98585.967601] usb 2-1.4: USB disconnect, device number 32
[98585.968632] done.
[98585.971382] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[98585.975306] ata2: hard resetting link
[98585.987568] video LNXVIDEO:00: Restoring backlight state
[98585.988406] PM: suspend exit
[98586.016747] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[98586.047791] usb 2-1.4: new high-speed USB device number 33 using ehci-pci
[98586.127283] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[98586.127290] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[98586.127294] usb 2-1.4: Product: 㕆㈵朱w
[98586.127297] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[98586.174296] usbhid 2-1.4:1.0: can't add hid device: -71
[98586.174330] usbhid: probe of 2-1.4:1.0 failed with error -71
[98586.231281] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[98586.232589] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[98586.238171] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[98586.240344] usb 2-1.4: USB disconnect, device number 33
[98586.474958] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[98586.554314] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[98586.592151] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[98586.697820] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[98586.738628] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[98586.739622] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[98586.739632] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[98586.741578] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[98586.755557] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[98586.756509] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[98586.756519] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[98586.758401] ata2.00: configured for UDMA/100
[98586.994670] ata2: EH complete
[98587.001298] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[98587.054891] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[98587.055355] sr 1:0:0:0: Attached scsi CD-ROM sr0
[98587.055556] sr 1:0:0:0: Attached scsi generic sg1 type 5
[98587.181054] usb 2-1.4: new high-speed USB device number 34 using ehci-pci
[98587.266936] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[98587.266944] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[98587.266948] usb 2-1.4: Product: F5521gw
[98587.266953] usb 2-1.4: Manufacturer: Lenovo
[98587.266956] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[98587.299813] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[98587.301227] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[98587.302871] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[98587.335182] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[98587.335639] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[98587.336350] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[98587.336700] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[98587.509800] usb 2-1.1: new high-speed USB device number 35 using ehci-pci
[98587.591368] usb 2-1.1: New USB device found, idVendor=1e68, idProduct=1019
[98587.591375] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[98587.591379] usb 2-1.1: Product: Android
[98587.591383] usb 2-1.1: Manufacturer: Android
[98587.591386] usb 2-1.1: SerialNumber: 36300ZGE9000D2B
[98587.891815] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[98589.436236] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[98589.437124] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[98589.615321] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[98589.617740] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[98589.685420] wlp3s0: authenticated
[98589.685691] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[98589.687164] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[98589.690705] wlp3s0: associated
[98589.740157] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[98589.785473] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[98604.396176] sd 6:0:0:0: [sdb] 60874752 512-byte logical blocks: (31.2 GB/29.0 GiB)
[98604.403971]  sdb: sdb1
[103026.277203] usb 2-1.1: USB disconnect, device number 35
[106945.891821] pps_ldisc: PPS line discipline registered
[106945.892556] pps pps0: new PPS source acm2
[106945.892599] pps pps0: source "/dev/ttyACM2" added
[118498.994213] usb 2-1.1: new high-speed USB device number 36 using ehci-pci
[118499.075042] usb 2-1.1: New USB device found, idVendor=1e68, idProduct=1019
[118499.075051] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[118499.075055] usb 2-1.1: Product: Android
[118499.075106] usb 2-1.1: Manufacturer: Android
[118499.075110] usb 2-1.1: SerialNumber: 36300ZGE9000D2B
[119549.183314] usb 2-1.1: USB disconnect, device number 36
[119553.774754] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[119553.774767] ata2.00: waking up from sleep
[119553.774776] ata2: SError: { CommWake }
[119553.774788] ata2: hard resetting link
[119554.084188] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[119554.087761] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[119554.088167] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[119554.088174] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[119554.093724] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[119554.094096] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[119554.094103] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[119554.095849] ata2.00: configured for UDMA/100
[119554.096625] ata2: EH complete
[119559.142639] ata2.00: disabled
[119559.144845] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[124215.703196] sd 6:0:0:0: [sdb] 60874752 512-byte logical blocks: (31.2 GB/29.0 GiB)
[124215.711497]  sdb: sdb1
[125383.303747] usb 2-1.1: new high-speed USB device number 37 using ehci-pci
[125383.384612] usb 2-1.1: New USB device found, idVendor=1e68, idProduct=1019
[125383.384620] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[125383.384625] usb 2-1.1: Product: Android
[125383.384629] usb 2-1.1: Manufacturer: Android
[125383.384633] usb 2-1.1: SerialNumber: 36300ZGE9000D2B
[127243.471863] usb 2-1.1: USB disconnect, device number 37
[128342.282323] e1000e: enp0s25 NIC Link is Down
[128342.311886] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[128342.592961] PM: suspend entry (deep)
[128342.592965] PM: Syncing filesystems ... done.
[128342.612020] Freezing user space processes ... (elapsed 0.003 seconds) done.
[128342.615347] OOM killer disabled.
[128342.615349] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[128342.616532] Suspending console(s) (use no_console_suspend to debug)
[128342.789412] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[128342.790692] sd 0:0:0:0: [sda] Stopping disk
[128342.831152] e1000e: EEE TX LPI TIMER: 00000011
[128343.020794] ACPI: EC: interrupt blocked
[128343.047087] ACPI: Preparing to enter system sleep state S3
[128343.055505] ACPI: EC: event blocked
[128343.055506] ACPI: EC: EC stopped
[128343.055508] PM: Saving platform NVS memory
[128343.055535] Disabling non-boot CPUs ...
[128343.066396] IRQ 24: no longer affine to CPU1
[128343.067429] smpboot: CPU 1 is now offline
[128343.087370] smpboot: CPU 2 is now offline
[128343.105154] IRQ 16: no longer affine to CPU3
[128343.105165] IRQ 26: no longer affine to CPU3
[128343.106198] smpboot: CPU 3 is now offline
[128343.130231] smpboot: CPU 4 is now offline
[128343.146073] IRQ 23: no longer affine to CPU5
[128343.147113] smpboot: CPU 5 is now offline
[128343.159138] smpboot: CPU 6 is now offline
[128343.168983] IRQ 28: no longer affine to CPU7
[128343.170031] smpboot: CPU 7 is now offline
[128343.173639] ACPI: Low-level resume complete
[128343.173746] ACPI: EC: EC started
[128343.173748] PM: Restoring platform NVS memory
[128343.174228] Enabling non-boot CPUs ...
[128343.174363] x86: Booting SMP configuration:
[128343.174366] smpboot: Booting Node 0 Processor 1 APIC 0x1
[128343.175435] Disabled fast string operations
[128343.177893]  cache: parent cpu1 should not be sleeping
[128343.178500] CPU1 is up
[128343.178583] smpboot: Booting Node 0 Processor 2 APIC 0x2
[128343.179442] Disabled fast string operations
[128343.181865]  cache: parent cpu2 should not be sleeping
[128343.182510] CPU2 is up
[128343.182592] smpboot: Booting Node 0 Processor 3 APIC 0x3
[128343.183454] Disabled fast string operations
[128343.185860]  cache: parent cpu3 should not be sleeping
[128343.186538] CPU3 is up
[128343.186689] smpboot: Booting Node 0 Processor 4 APIC 0x4
[128343.187042] Disabled fast string operations
[128343.189352]  cache: parent cpu4 should not be sleeping
[128343.190129] CPU4 is up
[128343.190197] smpboot: Booting Node 0 Processor 5 APIC 0x5
[128343.191052] Disabled fast string operations
[128343.193360]  cache: parent cpu5 should not be sleeping
[128343.194130] CPU5 is up
[128343.194198] smpboot: Booting Node 0 Processor 6 APIC 0x6
[128343.195055] Disabled fast string operations
[128343.197393]  cache: parent cpu6 should not be sleeping
[128343.198259] CPU6 is up
[128343.198324] smpboot: Booting Node 0 Processor 7 APIC 0x7
[128343.199187] Disabled fast string operations
[128343.201496]  cache: parent cpu7 should not be sleeping
[128343.202402] CPU7 is up
[128343.211307] ACPI: Waking up from system sleep state S3
[128343.227337] ACPI: EC: interrupt unblocked
[128343.239596] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[128343.252307] ACPI: EC: event unblocked
[128343.252770] sd 0:0:0:0: [sda] Starting disk
[128343.478796] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[128343.478849] usb 2-1.4: reset high-speed USB device number 34 using ehci-pci
[128343.557191] usb 2-1.4: device firmware changed
[128343.564591] ata5: SATA link down (SStatus 0 SControl 300)
[128343.564799] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[128343.564844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[128343.568347] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[128343.568355] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[128343.568361] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[128343.568694] ata1.00: supports DRM functions and may not be fully accessible
[128343.569320] ata1.00: NCQ Send/Recv Log not supported
[128343.571935] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[128343.571942] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[128343.571948] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[128343.572310] ata1.00: supports DRM functions and may not be fully accessible
[128343.572594] ata4: SATA link down (SStatus 0 SControl 300)
[128343.572794] ata1.00: NCQ Send/Recv Log not supported
[128343.573361] ata1.00: configured for UDMA/133
[128343.806819] firewire_core 0000:0d:00.3: rediscovered device fw0
[128343.836947] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[128343.977723] OOM killer enabled.
[128343.977725] Restarting tasks ... 
[128343.977780] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[128343.978152] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[128343.978159] ata2: ACPI event
[128343.978167] ata2: SError: { PHYRdyChg }
[128343.980351] done.
[128343.984455] usb 2-1.4: USB disconnect, device number 34
[128343.988250] ata2: hard resetting link
[128343.990116] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[128343.999085] video LNXVIDEO:00: Restoring backlight state
[128343.999166] pps pps0: removed
[128343.999215] cdc_acm 2-1.4:1.9: failed to set dtr/rts
[128343.999784] PM: suspend exit
[128344.029216] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[128344.063725] usb 2-1.4: new high-speed USB device number 38 using ehci-pci
[128344.144004] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[128344.144010] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[128344.144013] usb 2-1.4: Product: 㕆㈵朱w
[128344.144016] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[128344.191078] usbhid 2-1.4:1.0: can't add hid device: -71
[128344.191106] usbhid: probe of 2-1.4:1.0 failed with error -71
[128344.239015] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[128344.240124] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[128344.246062] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[128344.278306] usb 2-1.4: USB disconnect, device number 38
[128344.482175] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[128344.560062] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[128344.686333] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[128344.704705] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[128344.775995] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[128344.776867] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[128344.776870] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[128344.778569] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[128344.793181] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[128344.794097] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[128344.794104] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[128344.795911] ata2.00: configured for UDMA/100
[128345.031348] ata2: EH complete
[128345.033314] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[128345.096754] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[128345.097248] sr 1:0:0:0: Attached scsi CD-ROM sr0
[128345.097461] sr 1:0:0:0: Attached scsi generic sg1 type 5
[128345.218813] usb 2-1.4: new high-speed USB device number 39 using ehci-pci
[128345.304262] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[128345.304270] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[128345.304275] usb 2-1.4: Product: F5521gw
[128345.304279] usb 2-1.4: Manufacturer: Lenovo
[128345.304283] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[128345.338315] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[128345.339722] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[128345.341417] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[128345.372791] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[128345.373314] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[128345.374158] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[128345.374470] cdc_acm 2-1.4:1.9: ttyACM3: USB ACM device
[128345.925486] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[128347.465142] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[128347.466084] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[128347.801705] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[128347.804516] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[128347.859125] wlp3s0: authenticated
[128347.860715] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[128347.862233] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[128347.867566] wlp3s0: associated
[128347.909880] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[128347.959957] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[128372.564502] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[128379.721221] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[128379.766743] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[128379.769689] wlp3s0: authenticated
[128379.770734] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[128379.774688] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=3)
[128379.780534] wlp3s0: associated
[129115.915236] e1000e: enp0s25 NIC Link is Down
[129115.944521] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[129116.244707] PM: suspend entry (deep)
[129116.244709] PM: Syncing filesystems ... done.
[129116.264141] Freezing user space processes ... (elapsed 0.003 seconds) done.
[129116.267492] OOM killer disabled.
[129116.267494] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[129116.269071] Suspending console(s) (use no_console_suspend to debug)
[129116.430405] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[129116.433429] sd 0:0:0:0: [sda] Stopping disk
[129116.480299] e1000e: EEE TX LPI TIMER: 00000011
[129116.657494] ACPI: EC: interrupt blocked
[129116.684081] ACPI: Preparing to enter system sleep state S3
[129116.692250] ACPI: EC: event blocked
[129116.692251] ACPI: EC: EC stopped
[129116.692253] PM: Saving platform NVS memory
[129116.692279] Disabling non-boot CPUs ...
[129116.703307] IRQ 24: no longer affine to CPU1
[129116.704333] smpboot: CPU 1 is now offline
[129116.728967] smpboot: CPU 2 is now offline
[129116.751089] IRQ 16: no longer affine to CPU3
[129116.751099] IRQ 26: no longer affine to CPU3
[129116.752144] smpboot: CPU 3 is now offline
[129116.767179] smpboot: CPU 4 is now offline
[129116.785992] IRQ 23: no longer affine to CPU5
[129116.787033] smpboot: CPU 5 is now offline
[129116.801093] smpboot: CPU 6 is now offline
[129116.806911] IRQ 28: no longer affine to CPU7
[129116.807959] smpboot: CPU 7 is now offline
[129116.811372] ACPI: Low-level resume complete
[129116.811480] ACPI: EC: EC started
[129116.811481] PM: Restoring platform NVS memory
[129116.812016] Enabling non-boot CPUs ...
[129116.812153] x86: Booting SMP configuration:
[129116.812156] smpboot: Booting Node 0 Processor 1 APIC 0x1
[129116.813253] Disabled fast string operations
[129116.815730]  cache: parent cpu1 should not be sleeping
[129116.816373] CPU1 is up
[129116.816467] smpboot: Booting Node 0 Processor 2 APIC 0x2
[129116.817330] Disabled fast string operations
[129116.819768]  cache: parent cpu2 should not be sleeping
[129116.820439] CPU2 is up
[129116.820508] smpboot: Booting Node 0 Processor 3 APIC 0x3
[129116.821373] Disabled fast string operations
[129116.823788]  cache: parent cpu3 should not be sleeping
[129116.824480] CPU3 is up
[129116.824561] smpboot: Booting Node 0 Processor 4 APIC 0x4
[129116.825417] Disabled fast string operations
[129116.827765]  cache: parent cpu4 should not be sleeping
[129116.828540] CPU4 is up
[129116.828611] smpboot: Booting Node 0 Processor 5 APIC 0x5
[129116.829456] Disabled fast string operations
[129116.831780]  cache: parent cpu5 should not be sleeping
[129116.832553] CPU5 is up
[129116.832631] smpboot: Booting Node 0 Processor 6 APIC 0x6
[129116.833519] Disabled fast string operations
[129116.835897]  cache: parent cpu6 should not be sleeping
[129116.836774] CPU6 is up
[129116.836925] smpboot: Booting Node 0 Processor 7 APIC 0x7
[129116.837280] Disabled fast string operations
[129116.839590]  cache: parent cpu7 should not be sleeping
[129116.840502] CPU7 is up
[129116.849399] ACPI: Waking up from system sleep state S3
[129116.865447] ACPI: EC: interrupt unblocked
[129116.877453] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[129116.890065] ACPI: EC: event unblocked
[129116.900038] sd 0:0:0:0: [sda] Starting disk
[129117.116740] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[129117.116817] usb 2-1.4: reset high-speed USB device number 39 using ehci-pci
[129117.194955] usb 2-1.4: device firmware changed
[129117.218675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[129117.218711] ata5: SATA link down (SStatus 0 SControl 300)
[129117.218752] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[129117.218785] ata4: SATA link down (SStatus 0 SControl 300)
[129117.223511] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[129117.223518] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[129117.223524] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129117.224035] ata1.00: supports DRM functions and may not be fully accessible
[129117.224675] ata1.00: NCQ Send/Recv Log not supported
[129117.227136] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[129117.227143] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[129117.227149] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129117.227480] ata1.00: supports DRM functions and may not be fully accessible
[129117.227952] ata1.00: NCQ Send/Recv Log not supported
[129117.228457] ata1.00: configured for UDMA/133
[129117.422359] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[129117.423240] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[129117.423247] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129117.439208] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[129117.440182] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[129117.440189] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129117.442072] ata2.00: configured for UDMA/100
[129117.444714] firewire_core 0000:0d:00.3: rediscovered device fw0
[129117.477406] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[129117.928251] OOM killer enabled.
[129117.928254] Restarting tasks ... done.
[129117.931071] usb 2-1.4: USB disconnect, device number 39
[129117.932087] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[129117.949419] video LNXVIDEO:00: Restoring backlight state
[129117.950264] PM: suspend exit
[129117.974881] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[129118.014628] usb 2-1.4: new high-speed USB device number 40 using ehci-pci
[129118.094656] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[129118.094663] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[129118.094666] usb 2-1.4: Product: 㕆㈵朱w
[129118.094669] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[129118.143374] usbhid 2-1.4:1.0: can't add hid device: -71
[129118.143400] usbhid: probe of 2-1.4:1.0 failed with error -71
[129118.172143] usb 2-1.4: USB disconnect, device number 40
[129118.189028] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[129118.190209] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[129118.195957] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[129118.431997] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[129118.522444] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[129118.653687] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[129119.112730] usb 2-1.4: new high-speed USB device number 41 using ehci-pci
[129119.198990] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[129119.198998] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[129119.199003] usb 2-1.4: Product: F5521gw
[129119.199007] usb 2-1.4: Manufacturer: Lenovo
[129119.199011] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[129119.232453] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[129119.234277] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[129119.236078] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[129119.265772] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[129119.267145] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[129119.268549] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[129119.269250] cdc_acm 2-1.4:1.9: ttyACM3: USB ACM device
[129119.831945] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[129119.844673] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[129119.844678] ata2.00: waking up from sleep
[129119.844681] ata2: SError: { CommWake }
[129119.844687] ata2: hard resetting link
[129120.154051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[129120.157114] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[129120.157444] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[129120.157450] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129120.162610] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[129120.162978] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[129120.162984] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[129120.164710] ata2.00: configured for UDMA/100
[129120.165640] ata2: EH complete
[129121.379031] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[129121.379914] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[129121.717190] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[129121.719762] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[129121.723042] wlp3s0: authenticated
[129121.723532] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[129121.727771] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=3)
[129121.731222] wlp3s0: associated
[129123.881161] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[129125.213559] ata2.00: disabled
[129125.214678] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[132595.368691] e1000e: enp0s25 NIC Link is Down
[132595.419570] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[132595.731135] PM: suspend entry (deep)
[132595.731140] PM: Syncing filesystems ... done.
[132595.750388] Freezing user space processes ... (elapsed 0.003 seconds) done.
[132595.754258] OOM killer disabled.
[132595.754260] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[132595.755870] Suspending console(s) (use no_console_suspend to debug)
[132595.931832] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[132595.934784] sd 0:0:0:0: [sda] Stopping disk
[132595.973196] e1000e: EEE TX LPI TIMER: 00000011
[132596.166220] ACPI: EC: interrupt blocked
[132596.193436] ACPI: Preparing to enter system sleep state S3
[132596.201835] ACPI: EC: event blocked
[132596.201837] ACPI: EC: EC stopped
[132596.201838] PM: Saving platform NVS memory
[132596.201864] Disabling non-boot CPUs ...
[132596.212716] IRQ 24: no longer affine to CPU1
[132596.213737] smpboot: CPU 1 is now offline
[132596.237662] smpboot: CPU 2 is now offline
[132596.256514] IRQ 26: no longer affine to CPU3
[132596.257546] smpboot: CPU 3 is now offline
[132596.282463] smpboot: CPU 4 is now offline
[132596.293378] IRQ 16: no longer affine to CPU5
[132596.293388] IRQ 23: no longer affine to CPU5
[132596.293395] IRQ 28: no longer affine to CPU5
[132596.294429] smpboot: CPU 5 is now offline
[132596.310499] smpboot: CPU 6 is now offline
[132596.321375] smpboot: CPU 7 is now offline
[132596.324843] ACPI: Low-level resume complete
[132596.324952] ACPI: EC: EC started
[132596.324953] PM: Restoring platform NVS memory
[132596.325528] Enabling non-boot CPUs ...
[132596.325681] x86: Booting SMP configuration:
[132596.325684] smpboot: Booting Node 0 Processor 1 APIC 0x1
[132596.326756] Disabled fast string operations
[132596.329223]  cache: parent cpu1 should not be sleeping
[132596.329860] CPU1 is up
[132596.329952] smpboot: Booting Node 0 Processor 2 APIC 0x2
[132596.330813] Disabled fast string operations
[132596.333244]  cache: parent cpu2 should not be sleeping
[132596.333905] CPU2 is up
[132596.333988] smpboot: Booting Node 0 Processor 3 APIC 0x3
[132596.334852] Disabled fast string operations
[132596.337257]  cache: parent cpu3 should not be sleeping
[132596.337933] CPU3 is up
[132596.338119] smpboot: Booting Node 0 Processor 4 APIC 0x4
[132596.338983] Disabled fast string operations
[132596.341387]  cache: parent cpu4 should not be sleeping
[132596.342165] CPU4 is up
[132596.342233] smpboot: Booting Node 0 Processor 5 APIC 0x5
[132596.343074] Disabled fast string operations
[132596.345384]  cache: parent cpu5 should not be sleeping
[132596.346165] CPU5 is up
[132596.346231] smpboot: Booting Node 0 Processor 6 APIC 0x6
[132596.347074] Disabled fast string operations
[132596.349409]  cache: parent cpu6 should not be sleeping
[132596.350274] CPU6 is up
[132596.350341] smpboot: Booting Node 0 Processor 7 APIC 0x7
[132596.351203] Disabled fast string operations
[132596.353519]  cache: parent cpu7 should not be sleeping
[132596.354432] CPU7 is up
[132596.363341] ACPI: Waking up from system sleep state S3
[132596.379448] ACPI: EC: interrupt unblocked
[132596.391851] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[132596.404474] ACPI: EC: event unblocked
[132596.414409] sd 0:0:0:0: [sda] Starting disk
[132596.631175] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[132596.631227] usb 2-1.4: reset high-speed USB device number 41 using ehci-pci
[132596.709283] usb 2-1.4: device firmware changed
[132596.732802] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[132596.732949] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[132596.733121] ata4: SATA link down (SStatus 0 SControl 300)
[132596.733157] ata5: SATA link down (SStatus 0 SControl 300)
[132596.736101] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[132596.736109] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[132596.736115] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[132596.736351] ata1.00: supports DRM functions and may not be fully accessible
[132596.736816] ata1.00: NCQ Send/Recv Log not supported
[132596.738875] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[132596.738881] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[132596.738887] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[132596.739040] ata1.00: supports DRM functions and may not be fully accessible
[132596.739534] ata1.00: NCQ Send/Recv Log not supported
[132596.740270] ata1.00: configured for UDMA/133
[132596.959159] firewire_core 0000:0d:00.3: rediscovered device fw0
[132596.989520] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[132597.127765] OOM killer enabled.
[132597.127769] Restarting tasks ... 
[132597.127778] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[132597.128066] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[132597.128076] ata2: ACPI event
[132597.128084] ata2: SError: { PHYRdyChg }
[132597.130559] done.
[132597.131158] usb 2-1.4: USB disconnect, device number 41
[132597.132195] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[132597.138161] ata2: hard resetting link
[132597.152652] video LNXVIDEO:00: Restoring backlight state
[132597.153541] PM: suspend exit
[132597.178399] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[132597.211090] usb 2-1.4: new high-speed USB device number 42 using ehci-pci
[132597.290834] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[132597.290843] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[132597.290847] usb 2-1.4: Product: 㕆㈵朱w
[132597.290851] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[132597.338073] usbhid 2-1.4:1.0: can't add hid device: -71
[132597.338095] usbhid: probe of 2-1.4:1.0 failed with error -71
[132597.391327] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[132597.392591] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[132597.398386] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[132597.430594] usb 2-1.4: USB disconnect, device number 42
[132597.634536] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[132597.724764] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[132597.862050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[132597.871385] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[132597.929696] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[132597.930511] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[132597.930514] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[132597.932216] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[132597.946672] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[132597.947734] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[132597.947739] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[132597.949537] ata2.00: configured for UDMA/100
[132598.184980] ata2: EH complete
[132598.186882] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[132598.240146] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[132598.240525] sr 1:0:0:0: Attached scsi CD-ROM sr0
[132598.240739] sr 1:0:0:0: Attached scsi generic sg1 type 5
[132598.371134] usb 2-1.4: new high-speed USB device number 43 using ehci-pci
[132598.456647] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[132598.456655] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[132598.456660] usb 2-1.4: Product: F5521gw
[132598.456664] usb 2-1.4: Manufacturer: Lenovo
[132598.456668] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[132598.490763] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[132598.491933] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[132598.494991] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[132598.526237] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[132598.526806] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[132598.527772] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[132598.528202] cdc_acm 2-1.4:1.9: ttyACM3: USB ACM device
[132599.077766] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[132600.625330] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[132600.628322] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[132601.041152] wlp3s0: authenticate with 04:bf:6d:43:c9:ae
[132601.044107] wlp3s0: send auth to 04:bf:6d:43:c9:ae (try 1/3)
[132601.047078] wlp3s0: authenticated
[132601.047962] wlp3s0: associate with 04:bf:6d:43:c9:ae (try 1/3)
[132601.051847] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:ae (capab=0x411 status=0 aid=3)
[132601.055579] wlp3s0: associated
[132601.089768] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[132607.412855] do_IRQ: 7.42 No irq handler for vector
[142397.296448] powercap intel-rapl:0: package locked by BIOS, monitoring only
[142863.602404] CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
[142863.602406] CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
[142863.602408] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602410] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602412] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602413] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602415] CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602417] CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602420] CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.602430] CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[142863.603396] CPU4: Core temperature/speed normal
[142863.603397] CPU5: Core temperature/speed normal
[142863.603398] CPU2: Package temperature/speed normal
[142863.603400] CPU3: Package temperature/speed normal
[142863.603401] CPU0: Package temperature/speed normal
[142863.603402] CPU6: Package temperature/speed normal
[142863.603403] CPU1: Package temperature/speed normal
[142863.603404] CPU7: Package temperature/speed normal
[142863.603405] CPU5: Package temperature/speed normal
[142863.603407] CPU4: Package temperature/speed normal
[143316.402853] CPU5: Core temperature above threshold, cpu clock throttled (total events = 213)
[143316.402854] CPU4: Core temperature above threshold, cpu clock throttled (total events = 213)
[143316.402856] CPU2: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402859] CPU1: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402860] CPU0: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402862] CPU7: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402864] CPU3: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402866] CPU6: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402869] CPU4: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.402879] CPU5: Package temperature above threshold, cpu clock throttled (total events = 284)
[143316.403842] CPU5: Core temperature/speed normal
[143316.403843] CPU4: Core temperature/speed normal
[143316.403845] CPU1: Package temperature/speed normal
[143316.403846] CPU0: Package temperature/speed normal
[143316.403847] CPU3: Package temperature/speed normal
[143316.403849] CPU6: Package temperature/speed normal
[143316.403850] CPU2: Package temperature/speed normal
[143316.403851] CPU7: Package temperature/speed normal
[143316.403852] CPU4: Package temperature/speed normal
[143316.403854] CPU5: Package temperature/speed normal
[146152.938606] wlp3s0: deauthenticating from 04:bf:6d:43:c9:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[146157.963608] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[146157.996287] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[146158.006381] wlp3s0: authenticated
[146158.007508] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[146158.008860] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[146158.013264] wlp3s0: associated
[146158.107458] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[149349.883713] usb 2-1.1: new high-speed USB device number 44 using ehci-pci
[149349.964394] usb 2-1.1: New USB device found, idVendor=1e68, idProduct=1019
[149349.964402] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[149349.964407] usb 2-1.1: Product: Android
[149349.964411] usb 2-1.1: Manufacturer: Android
[149349.964416] usb 2-1.1: SerialNumber: 36300ZGE9000D2B
[149586.098772] usb 2-1.1: reset high-speed USB device number 44 using ehci-pci
[151176.254214] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[151176.254227] ata2.00: waking up from sleep
[151176.254235] ata2: SError: { CommWake }
[151176.254247] ata2: hard resetting link
[151176.562902] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[151176.566475] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[151176.566786] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[151176.566795] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[151176.572428] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[151176.572767] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[151176.572776] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[151176.574546] ata2.00: configured for UDMA/100
[151176.575271] ata2: EH complete
[151181.624116] ata2.00: disabled
[151181.624542] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[151182.148452] usb 2-1.1: USB disconnect, device number 44
[151758.037547] TCP: wlp3s0: Driver has suspect GRO implementation, TCP performance may be compromised.
[152541.159106] usb 2-1.1: new high-speed USB device number 45 using ehci-pci
[152541.238477] usb 2-1.1: New USB device found, idVendor=1e68, idProduct=1019
[152541.238484] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[152541.238489] usb 2-1.1: Product: Android
[152541.238493] usb 2-1.1: Manufacturer: Android
[152541.238497] usb 2-1.1: SerialNumber: 36300ZGE9000D2B
[153277.051678] e1000e: enp0s25 NIC Link is Down
[153277.079413] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[153277.247761] PM: suspend entry (deep)
[153277.247764] PM: Syncing filesystems ... done.
[153277.325372] Freezing user space processes ... (elapsed 0.003 seconds) done.
[153277.328582] OOM killer disabled.
[153277.328584] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[153277.330093] Suspending console(s) (use no_console_suspend to debug)
[153277.521248] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[153277.522475] sd 0:0:0:0: [sda] Stopping disk
[153277.570075] e1000e: EEE TX LPI TIMER: 00000011
[153277.836854] ACPI: EC: interrupt blocked
[153277.863460] ACPI: Preparing to enter system sleep state S3
[153277.872193] ACPI: EC: event blocked
[153277.872194] ACPI: EC: EC stopped
[153277.872196] PM: Saving platform NVS memory
[153277.872223] Disabling non-boot CPUs ...
[153277.882664] IRQ 24: no longer affine to CPU1
[153277.883689] smpboot: CPU 1 is now offline
[153277.904571] smpboot: CPU 2 is now offline
[153277.923525] IRQ 16: no longer affine to CPU3
[153277.923534] IRQ 26: no longer affine to CPU3
[153277.925267] smpboot: CPU 3 is now offline
[153277.942562] smpboot: CPU 4 is now offline
[153277.956418] IRQ 23: no longer affine to CPU5
[153277.957463] smpboot: CPU 5 is now offline
[153277.965523] smpboot: CPU 6 is now offline
[153277.977294] IRQ 28: no longer affine to CPU7
[153277.978341] smpboot: CPU 7 is now offline
[153277.981834] ACPI: Low-level resume complete
[153277.981940] ACPI: EC: EC started
[153277.981941] PM: Restoring platform NVS memory
[153277.982442] Enabling non-boot CPUs ...
[153277.982581] x86: Booting SMP configuration:
[153277.982584] smpboot: Booting Node 0 Processor 1 APIC 0x1
[153277.983678] Disabled fast string operations
[153277.986141]  cache: parent cpu1 should not be sleeping
[153277.986767] CPU1 is up
[153277.986860] smpboot: Booting Node 0 Processor 2 APIC 0x2
[153277.987721] Disabled fast string operations
[153277.990149]  cache: parent cpu2 should not be sleeping
[153277.990807] CPU2 is up
[153277.990874] smpboot: Booting Node 0 Processor 3 APIC 0x3
[153277.991738] Disabled fast string operations
[153277.994131]  cache: parent cpu3 should not be sleeping
[153277.994804] CPU3 is up
[153277.994887] smpboot: Booting Node 0 Processor 4 APIC 0x4
[153277.995750] Disabled fast string operations
[153277.998176]  cache: parent cpu4 should not be sleeping
[153277.998932] CPU4 is up
[153277.998999] smpboot: Booting Node 0 Processor 5 APIC 0x5
[153277.999853] Disabled fast string operations
[153278.002184]  cache: parent cpu5 should not be sleeping
[153278.002934] CPU5 is up
[153278.003009] smpboot: Booting Node 0 Processor 6 APIC 0x6
[153278.003866] Disabled fast string operations
[153278.006215]  cache: parent cpu6 should not be sleeping
[153278.007046] CPU6 is up
[153278.007142] smpboot: Booting Node 0 Processor 7 APIC 0x7
[153278.007990] Disabled fast string operations
[153278.010295]  cache: parent cpu7 should not be sleeping
[153278.011128] CPU7 is up
[153278.020019] ACPI: Waking up from system sleep state S3
[153278.036397] ACPI: EC: interrupt unblocked
[153278.048617] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[153278.061580] ACPI: EC: event unblocked
[153278.071391] sd 0:0:0:0: [sda] Starting disk
[153278.282155] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[153278.283258] usb 2-1.4: reset high-speed USB device number 43 using ehci-pci
[153278.361392] usb 2-1.4: device firmware changed
[153278.383883] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[153278.384001] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[153278.384096] ata4: SATA link down (SStatus 0 SControl 300)
[153278.387398] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[153278.387406] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[153278.387412] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[153278.387764] ata1.00: supports DRM functions and may not be fully accessible
[153278.388387] ata1.00: NCQ Send/Recv Log not supported
[153278.390824] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[153278.390832] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[153278.390838] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[153278.391239] ata1.00: supports DRM functions and may not be fully accessible
[153278.391676] ata1.00: NCQ Send/Recv Log not supported
[153278.391883] ata5: SATA link down (SStatus 0 SControl 300)
[153278.392436] ata1.00: configured for UDMA/133
[153278.618156] firewire_core 0000:0d:00.3: rediscovered device fw0
[153278.645694] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[153280.421814] OOM killer enabled.
[153280.421817] Restarting tasks ... 
[153280.421859] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[153280.425061] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[153280.425075] ata2: ACPI event
[153280.425087] ata2: SError: { PHYRdyChg }
[153280.425541] done.
[153280.433957] usb 2-1.1: USB disconnect, device number 45
[153280.435163] ata2: hard resetting link
[153280.435757] usb 2-1.4: USB disconnect, device number 43
[153280.438628] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[153280.443199] video LNXVIDEO:00: Restoring backlight state
[153280.443910] PM: suspend exit
[153280.472872] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[153280.683140] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[153280.686255] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[153280.692467] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[153280.930943] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[153281.012215] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[153281.053110] usb 2-1.4: new high-speed USB device number 46 using ehci-pci
[153281.055870] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[153281.139075] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[153281.139081] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[153281.139084] usb 2-1.4: Product: F5521gw
[153281.139087] usb 2-1.4: Manufacturer: Lenovo
[153281.139090] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[153281.156168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[153281.160109] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[153281.160534] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[153281.160543] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[153281.162385] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[153281.166444] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[153281.166849] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[153281.166856] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[153281.168670] ata2.00: configured for UDMA/100
[153281.170888] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[153281.171332] ata2: EH complete
[153281.172397] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[153281.173050] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[153281.174320] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[153281.213173] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[153281.213963] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[153281.215136] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[153281.215733] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[153281.222872] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[153281.223152] sr 1:0:0:0: Attached scsi CD-ROM sr0
[153281.223308] sr 1:0:0:0: Attached scsi generic sg1 type 5
[153281.762528] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[153283.298396] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[153283.299320] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[153284.194056] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[153284.197070] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[153284.256614] wlp3s0: authenticated
[153284.258011] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[153284.259436] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[153284.263837] wlp3s0: associated
[153284.357770] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[153284.805460] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[160259.988575] e1000e: enp0s25 NIC Link is Down
[160260.017455] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[160260.314268] PM: suspend entry (deep)
[160260.314271] PM: Syncing filesystems ... done.
[160260.329604] Freezing user space processes ... (elapsed 0.002 seconds) done.
[160260.332295] OOM killer disabled.
[160260.332296] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[160260.333745] Suspending console(s) (use no_console_suspend to debug)
[160260.500540] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[160260.501858] sd 0:0:0:0: [sda] Stopping disk
[160260.544760] e1000e: EEE TX LPI TIMER: 00000011
[160260.715992] ACPI: EC: interrupt blocked
[160260.743269] ACPI: Preparing to enter system sleep state S3
[160260.751570] ACPI: EC: event blocked
[160260.751572] ACPI: EC: EC stopped
[160260.751573] PM: Saving platform NVS memory
[160260.751599] Disabling non-boot CPUs ...
[160260.762512] IRQ 24: no longer affine to CPU1
[160260.763541] smpboot: CPU 1 is now offline
[160260.779404] smpboot: CPU 2 is now offline
[160260.795273] IRQ 26: no longer affine to CPU3
[160260.796311] smpboot: CPU 3 is now offline
[160260.813394] smpboot: CPU 4 is now offline
[160260.832217] IRQ 16: no longer affine to CPU5
[160260.832228] IRQ 28: no longer affine to CPU5
[160260.833267] smpboot: CPU 5 is now offline
[160260.853283] smpboot: CPU 6 is now offline
[160260.863106] IRQ 23: no longer affine to CPU7
[160260.864166] smpboot: CPU 7 is now offline
[160260.867667] ACPI: Low-level resume complete
[160260.867774] ACPI: EC: EC started
[160260.867776] PM: Restoring platform NVS memory
[160260.868314] Enabling non-boot CPUs ...
[160260.868468] x86: Booting SMP configuration:
[160260.868471] smpboot: Booting Node 0 Processor 1 APIC 0x1
[160260.869542] Disabled fast string operations
[160260.872021]  cache: parent cpu1 should not be sleeping
[160260.872658] CPU1 is up
[160260.872751] smpboot: Booting Node 0 Processor 2 APIC 0x2
[160260.873612] Disabled fast string operations
[160260.876017]  cache: parent cpu2 should not be sleeping
[160260.876669] CPU2 is up
[160260.876752] smpboot: Booting Node 0 Processor 3 APIC 0x3
[160260.877613] Disabled fast string operations
[160260.880021]  cache: parent cpu3 should not be sleeping
[160260.880691] CPU3 is up
[160260.880769] smpboot: Booting Node 0 Processor 4 APIC 0x4
[160260.881631] Disabled fast string operations
[160260.883978]  cache: parent cpu4 should not be sleeping
[160260.884736] CPU4 is up
[160260.884900] smpboot: Booting Node 0 Processor 5 APIC 0x5
[160260.885252] Disabled fast string operations
[160260.887559]  cache: parent cpu5 should not be sleeping
[160260.888354] CPU5 is up
[160260.888421] smpboot: Booting Node 0 Processor 6 APIC 0x6
[160260.889279] Disabled fast string operations
[160260.891633]  cache: parent cpu6 should not be sleeping
[160260.892505] CPU6 is up
[160260.892571] smpboot: Booting Node 0 Processor 7 APIC 0x7
[160260.893430] Disabled fast string operations
[160260.895735]  cache: parent cpu7 should not be sleeping
[160260.896628] CPU7 is up
[160260.905513] ACPI: Waking up from system sleep state S3
[160260.920467] ACPI: EC: interrupt unblocked
[160260.932497] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[160260.945500] ACPI: EC: event unblocked
[160260.955342] sd 0:0:0:0: [sda] Starting disk
[160261.165932] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[160261.165947] usb 2-1.4: reset high-speed USB device number 46 using ehci-pci
[160261.244030] usb 2-1.4: device firmware changed
[160261.267642] ata4: SATA link down (SStatus 0 SControl 300)
[160261.267789] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[160261.267867] ata5: SATA link down (SStatus 0 SControl 300)
[160261.276372] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[160261.279750] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[160261.279758] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[160261.279764] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[160261.280162] ata1.00: supports DRM functions and may not be fully accessible
[160261.280600] ata1.00: NCQ Send/Recv Log not supported
[160261.283189] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[160261.283196] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[160261.283203] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[160261.283602] ata1.00: supports DRM functions and may not be fully accessible
[160261.284048] ata1.00: NCQ Send/Recv Log not supported
[160261.284660] ata1.00: configured for UDMA/133
[160261.478023] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[160261.478927] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[160261.478935] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[160261.494882] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[160261.495926] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[160261.495933] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[160261.497740] ata2.00: configured for UDMA/100
[160261.501924] firewire_core 0000:0d:00.3: rediscovered device fw0
[160261.533523] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[160261.983943] OOM killer enabled.
[160261.983946] Restarting tasks ... done.
[160261.992604] usb 2-1.4: USB disconnect, device number 46
[160261.993655] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[160262.019364] video LNXVIDEO:00: Restoring backlight state
[160262.020195] PM: suspend exit
[160262.041445] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[160262.069844] usb 2-1.4: new high-speed USB device number 47 using ehci-pci
[160262.148614] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[160262.148617] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[160262.148618] usb 2-1.4: Product: 㕆㈵朱w
[160262.148620] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[160262.195442] usbhid 2-1.4:1.0: can't add hid device: -71
[160262.195476] usbhid: probe of 2-1.4:1.0 failed with error -71
[160262.227642] usb 2-1.4: USB disconnect, device number 47
[160262.254156] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[160262.255303] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[160262.261216] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[160262.497324] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[160262.574682] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[160262.699422] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[160263.167877] usb 2-1.4: new high-speed USB device number 48 using ehci-pci
[160263.254091] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[160263.254100] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[160263.254105] usb 2-1.4: Product: F5521gw
[160263.254109] usb 2-1.4: Manufacturer: Lenovo
[160263.254113] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[160263.287805] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[160263.290104] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[160263.291819] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[160263.321983] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[160263.323033] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[160263.324337] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[160263.325005] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[160263.885724] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[160265.122805] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[160265.122817] ata2.00: waking up from sleep
[160265.122827] ata2: SError: { CommWake }
[160265.122838] ata2: hard resetting link
[160265.427864] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[160265.431837] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[160265.432380] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[160265.432389] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[160265.434300] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[160265.436321] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[160265.438208] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[160265.438577] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[160265.438584] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[160265.440426] ata2.00: configured for UDMA/100
[160265.441683] ata2: EH complete
[160265.863547] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[160265.865998] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[160265.927784] wlp3s0: authenticated
[160265.928812] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[160265.930375] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[160265.935046] wlp3s0: associated
[160266.027984] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[160266.976284] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[160270.496285] ata2.00: disabled
[160270.498503] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[160273.957294] wlp3s0: deauthenticated from 04:bf:6d:43:c9:af (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[160277.206370] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[160277.209836] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[160277.292966] wlp3s0: authenticated
[160277.294501] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[160277.295990] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[160277.300325] wlp3s0: associated
[160277.394084] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[176674.852849] e1000e: enp0s25 NIC Link is Down
[176674.879404] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[176675.062796] PM: suspend entry (deep)
[176675.062798] PM: Syncing filesystems ... done.
[176675.082921] Freezing user space processes ... (elapsed 0.003 seconds) done.
[176675.085957] OOM killer disabled.
[176675.085960] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[176675.086979] Suspending console(s) (use no_console_suspend to debug)
[176675.272916] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[176675.275859] sd 0:0:0:0: [sda] Stopping disk
[176675.325916] e1000e: EEE TX LPI TIMER: 00000011
[176675.879271] ACPI: EC: interrupt blocked
[176675.905587] ACPI: Preparing to enter system sleep state S3
[176675.914746] ACPI: EC: event blocked
[176675.914747] ACPI: EC: EC stopped
[176675.914749] PM: Saving platform NVS memory
[176675.914772] Disabling non-boot CPUs ...
[176675.925865] IRQ 24: no longer affine to CPU1
[176675.926889] smpboot: CPU 1 is now offline
[176675.950828] smpboot: CPU 2 is now offline
[176675.965647] IRQ 26: no longer affine to CPU3
[176675.966680] smpboot: CPU 3 is now offline
[176675.991724] smpboot: CPU 4 is now offline
[176676.005556] IRQ 16: no longer affine to CPU5
[176676.005566] IRQ 28: no longer affine to CPU5
[176676.006623] smpboot: CPU 5 is now offline
[176676.021648] smpboot: CPU 6 is now offline
[176676.028465] IRQ 23: no longer affine to CPU7
[176676.029519] smpboot: CPU 7 is now offline
[176676.033058] ACPI: Low-level resume complete
[176676.033170] ACPI: EC: EC started
[176676.033171] PM: Restoring platform NVS memory
[176676.033678] Enabling non-boot CPUs ...
[176676.033819] x86: Booting SMP configuration:
[176676.033822] smpboot: Booting Node 0 Processor 1 APIC 0x1
[176676.034896] Disabled fast string operations
[176676.037348]  cache: parent cpu1 should not be sleeping
[176676.037972] CPU1 is up
[176676.038062] smpboot: Booting Node 0 Processor 2 APIC 0x2
[176676.038925] Disabled fast string operations
[176676.041360]  cache: parent cpu2 should not be sleeping
[176676.042014] CPU2 is up
[176676.042082] smpboot: Booting Node 0 Processor 3 APIC 0x3
[176676.042942] Disabled fast string operations
[176676.045343]  cache: parent cpu3 should not be sleeping
[176676.046015] CPU3 is up
[176676.046097] smpboot: Booting Node 0 Processor 4 APIC 0x4
[176676.046954] Disabled fast string operations
[176676.049297]  cache: parent cpu4 should not be sleeping
[176676.050043] CPU4 is up
[176676.050109] smpboot: Booting Node 0 Processor 5 APIC 0x5
[176676.050964] Disabled fast string operations
[176676.053289]  cache: parent cpu5 should not be sleeping
[176676.054043] CPU5 is up
[176676.054118] smpboot: Booting Node 0 Processor 6 APIC 0x6
[176676.054977] Disabled fast string operations
[176676.057326]  cache: parent cpu6 should not be sleeping
[176676.058168] CPU6 is up
[176676.058259] smpboot: Booting Node 0 Processor 7 APIC 0x7
[176676.059102] Disabled fast string operations
[176676.061464]  cache: parent cpu7 should not be sleeping
[176676.062346] CPU7 is up
[176676.071233] ACPI: Waking up from system sleep state S3
[176676.087520] ACPI: EC: interrupt unblocked
[176676.099794] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[176676.112828] ACPI: EC: event unblocked
[176676.122702] sd 0:0:0:0: [sda] Starting disk
[176676.333304] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[176676.333361] usb 2-1.4: reset high-speed USB device number 48 using ehci-pci
[176676.411563] usb 2-1.4: device firmware changed
[176676.434887] ata4: SATA link down (SStatus 0 SControl 300)
[176676.435083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[176676.435116] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[176676.438525] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[176676.438533] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[176676.438539] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[176676.438848] ata1.00: supports DRM functions and may not be fully accessible
[176676.439297] ata1.00: NCQ Send/Recv Log not supported
[176676.441554] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[176676.441562] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[176676.441568] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[176676.441788] ata1.00: supports DRM functions and may not be fully accessible
[176676.442238] ata1.00: NCQ Send/Recv Log not supported
[176676.442750] ata1.00: configured for UDMA/133
[176676.443101] ata5: SATA link down (SStatus 0 SControl 300)
[176676.669302] firewire_core 0000:0d:00.3: rediscovered device fw0
[176676.701825] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[176676.839970] OOM killer enabled.
[176676.839972] Restarting tasks ... 
[176676.839986] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[176676.840559] usb 2-1.4: USB disconnect, device number 48
[176676.840584] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[176676.840597] ata2: ACPI event
[176676.840610] ata2: SError: { PHYRdyChg }
[176676.842391] done.
[176676.847044] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[176676.850688] ata2: hard resetting link
[176676.860988] video LNXVIDEO:00: Restoring backlight state
[176676.861815] PM: suspend exit
[176676.891153] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[176676.929226] usb 2-1.4: new high-speed USB device number 49 using ehci-pci
[176677.008969] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[176677.008977] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[176677.008982] usb 2-1.4: Product: 㕆㈵朱w
[176677.008987] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[176677.056677] usbhid 2-1.4:1.0: can't add hid device: -71
[176677.056709] usbhid: probe of 2-1.4:1.0 failed with error -71
[176677.102091] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[176677.105465] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[176677.111665] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[176677.139003] usb 2-1.4: USB disconnect, device number 49
[176677.350048] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[176677.431432] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[176677.470057] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[176677.570346] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[176677.635950] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[176677.636760] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[176677.636763] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[176677.638484] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[176677.652825] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[176677.653886] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[176677.653893] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[176677.655718] ata2.00: configured for UDMA/100
[176677.891823] ata2: EH complete
[176677.898415] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[176677.950453] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[176677.950900] sr 1:0:0:0: Attached scsi CD-ROM sr0
[176677.951111] sr 1:0:0:0: Attached scsi generic sg1 type 5
[176678.079308] usb 2-1.4: new high-speed USB device number 50 using ehci-pci
[176678.164892] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[176678.164900] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[176678.164905] usb 2-1.4: Product: F5521gw
[176678.164909] usb 2-1.4: Manufacturer: Lenovo
[176678.164913] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[176678.196864] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[176678.198095] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[176678.199587] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[176678.229439] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[176678.230558] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[176678.231251] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[176678.231763] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[176678.784649] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[176680.320701] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[176680.321662] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[176680.690962] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[176680.693987] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[176680.751024] wlp3s0: authenticated
[176680.752104] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[176680.753172] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[176680.756573] wlp3s0: associated
[176680.794099] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[176680.851776] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[178168.549287] e1000e: enp0s25 NIC Link is Down
[178168.578167] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[178168.871853] PM: suspend entry (deep)
[178168.871856] PM: Syncing filesystems ... done.
[178168.889940] Freezing user space processes ... (elapsed 0.003 seconds) done.
[178168.893511] OOM killer disabled.
[178168.893513] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[178168.894997] Suspending console(s) (use no_console_suspend to debug)
[178169.070383] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[178169.071639] sd 0:0:0:0: [sda] Stopping disk
[178169.113317] e1000e: EEE TX LPI TIMER: 00000011
[178169.277821] ACPI: EC: interrupt blocked
[178169.304064] ACPI: Preparing to enter system sleep state S3
[178169.312425] ACPI: EC: event blocked
[178169.312427] ACPI: EC: EC stopped
[178169.312429] PM: Saving platform NVS memory
[178169.312450] Disabling non-boot CPUs ...
[178169.323350] IRQ 24: no longer affine to CPU1
[178169.324370] smpboot: CPU 1 is now offline
[178169.348363] smpboot: CPU 2 is now offline
[178169.372146] IRQ 16: no longer affine to CPU3
[178169.372166] IRQ 26: no longer affine to CPU3
[178169.373195] smpboot: CPU 3 is now offline
[178169.393241] smpboot: CPU 4 is now offline
[178169.403060] IRQ 23: no longer affine to CPU5
[178169.404107] smpboot: CPU 5 is now offline
[178169.412139] smpboot: CPU 6 is now offline
[178169.422960] IRQ 28: no longer affine to CPU7
[178169.424006] smpboot: CPU 7 is now offline
[178169.427450] ACPI: Low-level resume complete
[178169.427559] ACPI: EC: EC started
[178169.427561] PM: Restoring platform NVS memory
[178169.428105] Enabling non-boot CPUs ...
[178169.428259] x86: Booting SMP configuration:
[178169.428262] smpboot: Booting Node 0 Processor 1 APIC 0x1
[178169.429341] Disabled fast string operations
[178169.431810]  cache: parent cpu1 should not be sleeping
[178169.432443] CPU1 is up
[178169.432535] smpboot: Booting Node 0 Processor 2 APIC 0x2
[178169.433398] Disabled fast string operations
[178169.435838]  cache: parent cpu2 should not be sleeping
[178169.436510] CPU2 is up
[178169.436591] smpboot: Booting Node 0 Processor 3 APIC 0x3
[178169.437456] Disabled fast string operations
[178169.439861]  cache: parent cpu3 should not be sleeping
[178169.440528] CPU3 is up
[178169.440603] smpboot: Booting Node 0 Processor 4 APIC 0x4
[178169.441456] Disabled fast string operations
[178169.443804]  cache: parent cpu4 should not be sleeping
[178169.444553] CPU4 is up
[178169.444671] smpboot: Booting Node 0 Processor 5 APIC 0x5
[178169.445608] Disabled fast string operations
[178169.447899]  cache: parent cpu5 should not be sleeping
[178169.448646] CPU5 is up
[178169.448744] smpboot: Booting Node 0 Processor 6 APIC 0x6
[178169.449590] Disabled fast string operations
[178169.451956]  cache: parent cpu6 should not be sleeping
[178169.452807] CPU6 is up
[178169.452873] smpboot: Booting Node 0 Processor 7 APIC 0x7
[178169.453731] Disabled fast string operations
[178169.456026]  cache: parent cpu7 should not be sleeping
[178169.456900] CPU7 is up
[178169.465777] ACPI: Waking up from system sleep state S3
[178169.480250] ACPI: EC: interrupt unblocked
[178169.492486] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[178169.505373] ACPI: EC: event unblocked
[178169.515116] sd 0:0:0:0: [sda] Starting disk
[178169.726796] usb 2-1.4: reset high-speed USB device number 50 using ehci-pci
[178169.726803] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[178169.804950] usb 2-1.4: device firmware changed
[178169.828473] ata5: SATA link down (SStatus 0 SControl 300)
[178169.828543] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[178169.828634] ata4: SATA link down (SStatus 0 SControl 300)
[178169.828799] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[178169.832323] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[178169.832330] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[178169.832336] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[178169.832717] ata1.00: supports DRM functions and may not be fully accessible
[178169.833335] ata1.00: NCQ Send/Recv Log not supported
[178169.835581] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[178169.835588] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[178169.835594] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[178169.835840] ata1.00: supports DRM functions and may not be fully accessible
[178169.836221] ata1.00: NCQ Send/Recv Log not supported
[178169.836765] ata1.00: configured for UDMA/133
[178170.042111] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[178170.042980] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[178170.042987] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[178170.059021] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[178170.059929] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[178170.059935] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[178170.061826] ata2.00: configured for UDMA/100
[178170.062784] firewire_core 0000:0d:00.3: rediscovered device fw0
[178170.094851] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[178170.548355] OOM killer enabled.
[178170.548358] Restarting tasks ... 
[178170.548677] usb 2-1.4: USB disconnect, device number 50
[178170.558067] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[178170.558291] done.
[178170.574468] video LNXVIDEO:00: Restoring backlight state
[178170.575161] PM: suspend exit
[178170.602433] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[178170.636659] usb 2-1.4: new high-speed USB device number 51 using ehci-pci
[178170.716738] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[178170.716742] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[178170.716755] usb 2-1.4: Product: 㕆㈵朱w
[178170.716759] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[178170.765489] usbhid 2-1.4:1.0: can't add hid device: -71
[178170.765512] usbhid: probe of 2-1.4:1.0 failed with error -71
[178170.787552] usb 2-1.4: USB disconnect, device number 51
[178170.814962] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[178170.816118] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[178170.822021] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[178171.058161] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[178171.135933] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[178171.262705] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[178171.727775] usb 2-1.4: new high-speed USB device number 52 using ehci-pci
[178171.814248] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[178171.814257] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[178171.814262] usb 2-1.4: Product: F5521gw
[178171.814266] usb 2-1.4: Manufacturer: Lenovo
[178171.814270] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[178171.848823] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[178171.850488] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[178171.852250] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[178171.881126] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[178171.882132] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[178171.883320] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[178171.883837] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[178172.434660] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[178172.434676] ata2.00: waking up from sleep
[178172.434685] ata2: SError: { CommWake }
[178172.434696] ata2: hard resetting link
[178172.447467] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[178172.739955] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[178172.742600] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[178172.742936] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[178172.742939] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[178172.747659] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[178172.747977] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[178172.747980] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[178172.749669] ata2.00: configured for UDMA/100
[178172.750616] ata2: EH complete
[178173.988282] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[178173.989200] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[178174.440872] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[178174.443239] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[178174.507128] wlp3s0: authenticated
[178174.508620] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[178174.510021] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[178174.514222] wlp3s0: associated
[178174.547508] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[178174.608086] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[178177.796641] ata2.00: disabled
[178177.797005] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[183364.285282] e1000e: enp0s25 NIC Link is Down
[183364.313371] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[183364.601974] PM: suspend entry (deep)
[183364.601977] PM: Syncing filesystems ... done.
[183364.613819] Freezing user space processes ... (elapsed 0.002 seconds) done.
[183364.616590] OOM killer disabled.
[183364.616591] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[183364.618054] Suspending console(s) (use no_console_suspend to debug)
[183364.814500] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[183364.817438] sd 0:0:0:0: [sda] Stopping disk
[183364.862874] e1000e: EEE TX LPI TIMER: 00000011
[183365.100892] ACPI: EC: interrupt blocked
[183365.127147] ACPI: Preparing to enter system sleep state S3
[183365.135408] ACPI: EC: event blocked
[183365.135410] ACPI: EC: EC stopped
[183365.135411] PM: Saving platform NVS memory
[183365.135437] Disabling non-boot CPUs ...
[183365.146397] IRQ 24: no longer affine to CPU1
[183365.147424] smpboot: CPU 1 is now offline
[183365.163284] smpboot: CPU 2 is now offline
[183365.179197] IRQ 16: no longer affine to CPU3
[183365.179208] IRQ 26: no longer affine to CPU3
[183365.180243] smpboot: CPU 3 is now offline
[183365.193222] smpboot: CPU 4 is now offline
[183365.205096] IRQ 23: no longer affine to CPU5
[183365.206138] smpboot: CPU 5 is now offline
[183365.219187] smpboot: CPU 6 is now offline
[183365.229022] IRQ 28: no longer affine to CPU7
[183365.230065] smpboot: CPU 7 is now offline
[183365.233529] ACPI: Low-level resume complete
[183365.233633] ACPI: EC: EC started
[183365.233635] PM: Restoring platform NVS memory
[183365.234189] Enabling non-boot CPUs ...
[183365.234326] x86: Booting SMP configuration:
[183365.234329] smpboot: Booting Node 0 Processor 1 APIC 0x1
[183365.235400] Disabled fast string operations
[183365.237863]  cache: parent cpu1 should not be sleeping
[183365.238495] CPU1 is up
[183365.238588] smpboot: Booting Node 0 Processor 2 APIC 0x2
[183365.239451] Disabled fast string operations
[183365.241865]  cache: parent cpu2 should not be sleeping
[183365.242532] CPU2 is up
[183365.242605] smpboot: Booting Node 0 Processor 3 APIC 0x3
[183365.243468] Disabled fast string operations
[183365.245871]  cache: parent cpu3 should not be sleeping
[183365.246531] CPU3 is up
[183365.246607] smpboot: Booting Node 0 Processor 4 APIC 0x4
[183365.247467] Disabled fast string operations
[183365.249875]  cache: parent cpu4 should not be sleeping
[183365.250602] CPU4 is up
[183365.250666] smpboot: Booting Node 0 Processor 5 APIC 0x5
[183365.251526] Disabled fast string operations
[183365.253914]  cache: parent cpu5 should not be sleeping
[183365.254643] CPU5 is up
[183365.254712] smpboot: Booting Node 0 Processor 6 APIC 0x6
[183365.255561] Disabled fast string operations
[183365.257911]  cache: parent cpu6 should not be sleeping
[183365.258775] CPU6 is up
[183365.258850] smpboot: Booting Node 0 Processor 7 APIC 0x7
[183365.259693] Disabled fast string operations
[183365.262014]  cache: parent cpu7 should not be sleeping
[183365.262887] CPU7 is up
[183365.271764] ACPI: Waking up from system sleep state S3
[183365.286922] ACPI: EC: interrupt unblocked
[183365.299679] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[183365.312184] ACPI: EC: event unblocked
[183365.312799] sd 0:0:0:0: [sda] Starting disk
[183365.531852] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[183365.539848] usb 2-1.4: reset high-speed USB device number 52 using ehci-pci
[183365.618116] usb 2-1.4: device firmware changed
[183365.625444] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[183365.625660] ata5: SATA link down (SStatus 0 SControl 300)
[183365.625696] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[183365.625820] ata4: SATA link down (SStatus 0 SControl 300)
[183365.629043] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[183365.629051] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[183365.629057] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183365.629386] ata1.00: supports DRM functions and may not be fully accessible
[183365.630014] ata1.00: NCQ Send/Recv Log not supported
[183365.632325] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[183365.632332] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[183365.632339] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183365.632564] ata1.00: supports DRM functions and may not be fully accessible
[183365.633079] ata1.00: NCQ Send/Recv Log not supported
[183365.633794] ata1.00: configured for UDMA/133
[183365.867847] firewire_core 0000:0d:00.3: rediscovered device fw0
[183365.900951] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[183366.038447] OOM killer enabled.
[183366.038449] Restarting tasks ... 
[183366.038465] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[183366.038773] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[183366.038786] ata2: ACPI event
[183366.038797] ata2: SError: { PHYRdyChg }
[183366.040441] done.
[183366.042975] usb 2-1.4: USB disconnect, device number 52
[183366.045823] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[183366.048875] ata2: hard resetting link
[183366.058109] video LNXVIDEO:00: Restoring backlight state
[183366.058770] PM: suspend exit
[183366.087198] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[183366.122799] usb 2-1.4: new high-speed USB device number 53 using ehci-pci
[183366.204090] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[183366.204098] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[183366.204102] usb 2-1.4: Product: 㕆㈵朱w
[183366.204106] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[183366.251371] usbhid 2-1.4:1.0: can't add hid device: -71
[183366.251414] usbhid: probe of 2-1.4:1.0 failed with error -71
[183366.300243] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[183366.301774] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[183366.308115] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[183366.338273] usb 2-1.4: USB disconnect, device number 53
[183366.544200] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[183366.621737] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[183366.748095] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[183366.764817] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[183366.838187] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[183366.839002] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[183366.839006] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183366.840702] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[183366.855153] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[183366.855995] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[183366.856000] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183366.857760] ata2.00: configured for UDMA/100
[183367.093448] ata2: EH complete
[183367.100569] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[183367.163045] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[183367.163362] sr 1:0:0:0: Attached scsi CD-ROM sr0
[183367.163452] sr 1:0:0:0: Attached scsi generic sg1 type 5
[183367.279846] usb 2-1.4: new high-speed USB device number 54 using ehci-pci
[183367.366299] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[183367.366311] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[183367.366318] usb 2-1.4: Product: F5521gw
[183367.366324] usb 2-1.4: Manufacturer: Lenovo
[183367.366330] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[183367.398526] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[183367.399683] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[183367.402343] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[183367.434884] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[183367.435379] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[183367.436283] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[183367.436703] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[183367.988972] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[183369.527150] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[183369.530105] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[183369.945082] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[183369.947343] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[183370.004965] wlp3s0: authenticated
[183370.005787] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[183370.007118] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[183370.010752] wlp3s0: associated
[183370.043919] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[183370.105916] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[183722.416128] e1000e: enp0s25 NIC Link is Down
[183722.444580] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[183722.741977] PM: suspend entry (deep)
[183722.741980] PM: Syncing filesystems ... done.
[183722.754475] Freezing user space processes ... (elapsed 0.003 seconds) done.
[183722.757527] OOM killer disabled.
[183722.757529] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[183722.759076] Suspending console(s) (use no_console_suspend to debug)
[183722.926404] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[183722.927663] sd 0:0:0:0: [sda] Stopping disk
[183722.968009] e1000e: EEE TX LPI TIMER: 00000011
[183723.120801] ACPI: EC: interrupt blocked
[183723.147082] ACPI: Preparing to enter system sleep state S3
[183723.156072] ACPI: EC: event blocked
[183723.156073] ACPI: EC: EC stopped
[183723.156075] PM: Saving platform NVS memory
[183723.156101] Disabling non-boot CPUs ...
[183723.166354] IRQ 24: no longer affine to CPU1
[183723.167385] smpboot: CPU 1 is now offline
[183723.183392] smpboot: CPU 2 is now offline
[183723.194066] IRQ 16: no longer affine to CPU3
[183723.194076] IRQ 26: no longer affine to CPU3
[183723.195114] smpboot: CPU 3 is now offline
[183723.217018] smpboot: CPU 4 is now offline
[183723.234042] IRQ 23: no longer affine to CPU5
[183723.235081] smpboot: CPU 5 is now offline
[183723.247146] smpboot: CPU 6 is now offline
[183723.251972] IRQ 28: no longer affine to CPU7
[183723.253014] smpboot: CPU 7 is now offline
[183723.257159] ACPI: Low-level resume complete
[183723.257266] ACPI: EC: EC started
[183723.257268] PM: Restoring platform NVS memory
[183723.257810] Enabling non-boot CPUs ...
[183723.257962] x86: Booting SMP configuration:
[183723.257965] smpboot: Booting Node 0 Processor 1 APIC 0x1
[183723.259064] Disabled fast string operations
[183723.261473]  cache: parent cpu1 should not be sleeping
[183723.262131] CPU1 is up
[183723.262223] smpboot: Booting Node 0 Processor 2 APIC 0x2
[183723.263085] Disabled fast string operations
[183723.265540]  cache: parent cpu2 should not be sleeping
[183723.266233] CPU2 is up
[183723.266314] smpboot: Booting Node 0 Processor 3 APIC 0x3
[183723.267178] Disabled fast string operations
[183723.269568]  cache: parent cpu3 should not be sleeping
[183723.270271] CPU3 is up
[183723.270349] smpboot: Booting Node 0 Processor 4 APIC 0x4
[183723.271211] Disabled fast string operations
[183723.273640]  cache: parent cpu4 should not be sleeping
[183723.274401] CPU4 is up
[183723.274538] smpboot: Booting Node 0 Processor 5 APIC 0x5
[183723.275403] Disabled fast string operations
[183723.277815]  cache: parent cpu5 should not be sleeping
[183723.278565] CPU5 is up
[183723.278665] smpboot: Booting Node 0 Processor 6 APIC 0x6
[183723.279512] Disabled fast string operations
[183723.281898]  cache: parent cpu6 should not be sleeping
[183723.282771] CPU6 is up
[183723.282837] smpboot: Booting Node 0 Processor 7 APIC 0x7
[183723.283698] Disabled fast string operations
[183723.286007]  cache: parent cpu7 should not be sleeping
[183723.286859] CPU7 is up
[183723.295766] ACPI: Waking up from system sleep state S3
[183723.310060] ACPI: EC: interrupt unblocked
[183723.322200] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[183723.335360] ACPI: EC: event unblocked
[183723.345141] sd 0:0:0:0: [sda] Starting disk
[183723.556756] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[183723.556822] usb 2-1.4: reset high-speed USB device number 54 using ehci-pci
[183723.634944] usb 2-1.4: device firmware changed
[183723.658378] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[183723.658495] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[183723.658623] ata4: SATA link down (SStatus 0 SControl 300)
[183723.658688] ata5: SATA link down (SStatus 0 SControl 300)
[183723.663281] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[183723.663289] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[183723.663295] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183723.663699] ata1.00: supports DRM functions and may not be fully accessible
[183723.664270] ata1.00: NCQ Send/Recv Log not supported
[183723.666583] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[183723.666590] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[183723.666596] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183723.666879] ata1.00: supports DRM functions and may not be fully accessible
[183723.667384] ata1.00: NCQ Send/Recv Log not supported
[183723.667916] ata1.00: configured for UDMA/133
[183723.868296] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[183723.869176] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[183723.869184] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183723.885167] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[183723.886153] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[183723.886159] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183723.888044] ata2.00: configured for UDMA/100
[183723.892709] firewire_core 0000:0d:00.3: rediscovered device fw0
[183723.920673] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[183724.374354] OOM killer enabled.
[183724.374357] Restarting tasks ... 
[183724.374770] usb 2-1.4: USB disconnect, device number 54
[183724.378551] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[183724.378804] done.
[183724.395792] video LNXVIDEO:00: Restoring backlight state
[183724.396582] PM: suspend exit
[183724.421450] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[183724.459676] usb 2-1.4: new high-speed USB device number 55 using ehci-pci
[183724.539013] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[183724.539021] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[183724.539036] usb 2-1.4: Product: 㕆㈵朱w
[183724.539039] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[183724.586225] usbhid 2-1.4:1.0: can't add hid device: -71
[183724.586235] usbhid: probe of 2-1.4:1.0 failed with error -71
[183724.617754] usb 2-1.4: USB disconnect, device number 55
[183724.636933] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[183724.638209] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[183724.643999] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[183724.880037] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[183724.957557] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[183725.085633] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[183725.557691] usb 2-1.4: new high-speed USB device number 56 using ehci-pci
[183725.643770] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[183725.643778] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[183725.643783] usb 2-1.4: Product: F5521gw
[183725.643787] usb 2-1.4: Manufacturer: Lenovo
[183725.643791] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[183725.679158] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[183725.680724] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[183725.682370] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[183725.712486] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[183725.713469] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[183725.714861] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[183725.715510] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[183726.271829] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[183727.558669] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[183727.558682] ata2.00: waking up from sleep
[183727.558690] ata2: SError: { CommWake }
[183727.558702] ata2: hard resetting link
[183727.813279] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[183727.814153] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[183727.867063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[183727.871065] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[183727.871442] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[183727.871449] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183727.876931] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[183727.877337] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[183727.877343] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[183727.879090] ata2.00: configured for UDMA/100
[183727.881190] ata2: EH complete
[183728.241141] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[183728.243478] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[183728.310930] wlp3s0: authenticated
[183728.311577] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[183728.313048] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[183728.318370] wlp3s0: associated
[183728.346094] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[183728.412046] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[183732.918618] ata2.00: disabled
[183732.918938] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[186880.784950] e1000e: enp0s25 NIC Link is Down
[186880.816276] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[186880.982949] PM: suspend entry (deep)
[186880.982954] PM: Syncing filesystems ... done.
[186881.000986] Freezing user space processes ... (elapsed 0.002 seconds) done.
[186881.003880] OOM killer disabled.
[186881.003882] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[186881.005363] Suspending console(s) (use no_console_suspend to debug)
[186881.212723] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[186881.215771] sd 0:0:0:0: [sda] Stopping disk
[186881.259891] e1000e: EEE TX LPI TIMER: 00000011
[186881.526195] ACPI: EC: interrupt blocked
[186881.552403] ACPI: Preparing to enter system sleep state S3
[186881.562178] ACPI: EC: event blocked
[186881.562179] ACPI: EC: EC stopped
[186881.562181] PM: Saving platform NVS memory
[186881.562206] Disabling non-boot CPUs ...
[186881.573675] smpboot: CPU 1 is now offline
[186881.589505] smpboot: CPU 2 is now offline
[186881.605509] smpboot: CPU 3 is now offline
[186881.630531] smpboot: CPU 4 is now offline
[186881.646424] smpboot: CPU 5 is now offline
[186881.661448] smpboot: CPU 6 is now offline
[186881.667306] smpboot: CPU 7 is now offline
[186881.670722] ACPI: Low-level resume complete
[186881.670833] ACPI: EC: EC started
[186881.670834] PM: Restoring platform NVS memory
[186881.671320] Enabling non-boot CPUs ...
[186881.671463] x86: Booting SMP configuration:
[186881.671465] smpboot: Booting Node 0 Processor 1 APIC 0x1
[186881.672573] Disabled fast string operations
[186881.674983]  cache: parent cpu1 should not be sleeping
[186881.675636] CPU1 is up
[186881.675729] smpboot: Booting Node 0 Processor 2 APIC 0x2
[186881.676591] Disabled fast string operations
[186881.679073]  cache: parent cpu2 should not be sleeping
[186881.679728] CPU2 is up
[186881.679795] smpboot: Booting Node 0 Processor 3 APIC 0x3
[186881.680659] Disabled fast string operations
[186881.683060]  cache: parent cpu3 should not be sleeping
[186881.683726] CPU3 is up
[186881.683808] smpboot: Booting Node 0 Processor 4 APIC 0x4
[186881.684673] Disabled fast string operations
[186881.687106]  cache: parent cpu4 should not be sleeping
[186881.687844] CPU4 is up
[186881.687911] smpboot: Booting Node 0 Processor 5 APIC 0x5
[186881.688776] Disabled fast string operations
[186881.691180]  cache: parent cpu5 should not be sleeping
[186881.691925] CPU5 is up
[186881.692001] smpboot: Booting Node 0 Processor 6 APIC 0x6
[186881.692851] Disabled fast string operations
[186881.695195]  cache: parent cpu6 should not be sleeping
[186881.696043] CPU6 is up
[186881.696116] smpboot: Booting Node 0 Processor 7 APIC 0x7
[186881.696962] Disabled fast string operations
[186881.699275]  cache: parent cpu7 should not be sleeping
[186881.700135] CPU7 is up
[186881.709047] ACPI: Waking up from system sleep state S3
[186881.725075] ACPI: EC: interrupt unblocked
[186881.737403] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[186881.749659] ACPI: EC: event unblocked
[186881.750120] sd 0:0:0:0: [sda] Starting disk
[186881.974171] usb 2-1.4: reset high-speed USB device number 56 using ehci-pci
[186881.974293] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[186882.052241] usb 2-1.4: device firmware changed
[186882.067711] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[186882.067744] ata5: SATA link down (SStatus 0 SControl 300)
[186882.067900] ata4: SATA link down (SStatus 0 SControl 300)
[186882.067938] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[186882.071224] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[186882.071231] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[186882.071238] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[186882.071541] ata1.00: supports DRM functions and may not be fully accessible
[186882.072050] ata1.00: NCQ Send/Recv Log not supported
[186882.074425] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[186882.074433] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[186882.074439] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[186882.074877] ata1.00: supports DRM functions and may not be fully accessible
[186882.075357] ata1.00: NCQ Send/Recv Log not supported
[186882.075842] ata1.00: configured for UDMA/133
[186882.310092] firewire_core 0000:0d:00.3: rediscovered device fw0
[186882.348106] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[186882.488981] OOM killer enabled.
[186882.488983] Restarting tasks ... 
[186882.489021] ACPI: \_SB_.PCI0.SAT1.PRT1: docking
[186882.489481] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[186882.489496] ata2: ACPI event
[186882.489508] ata2: SError: { PHYRdyChg }
[186882.491177] done.
[186882.491542] usb 2-1.4: USB disconnect, device number 56
[186882.492588] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[186882.499591] ata2: hard resetting link
[186882.510753] video LNXVIDEO:00: Restoring backlight state
[186882.511615] PM: suspend exit
[186882.541284] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[186882.577053] usb 2-1.4: new high-speed USB device number 57 using ehci-pci
[186882.657152] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[186882.657160] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[186882.657165] usb 2-1.4: Product: 㕆㈵朱w
[186882.657169] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[186882.704384] usbhid 2-1.4:1.0: can't add hid device: -71
[186882.704417] usbhid: probe of 2-1.4:1.0 failed with error -71
[186882.750796] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[186882.754573] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[186882.761323] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[186882.775702] usb 2-1.4: USB disconnect, device number 57
[186882.999867] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[186883.080214] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[186883.216083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[186883.236882] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[186883.270865] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[186883.271678] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[186883.271691] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[186883.273379] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[186883.286973] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[186883.287957] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[186883.287960] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[186883.289697] ata2.00: configured for UDMA/100
[186883.294476] ata2: EH complete
[186883.528033] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[186883.579208] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[186883.579701] sr 1:0:0:0: Attached scsi CD-ROM sr0
[186883.579879] sr 1:0:0:0: Attached scsi generic sg1 type 5
[186883.716037] usb 2-1.4: new high-speed USB device number 58 using ehci-pci
[186883.804112] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[186883.804117] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[186883.804120] usb 2-1.4: Product: F5521gw
[186883.804122] usb 2-1.4: Manufacturer: Lenovo
[186883.804124] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[186883.836039] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[186883.837347] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[186883.838982] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[186883.871144] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[186883.871910] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[186883.873277] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[186883.873896] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[186884.441580] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[186885.975444] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[186885.977432] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[186886.381785] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[186886.384628] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[186886.450727] wlp3s0: authenticated
[186886.451940] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[186886.453400] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[186886.458447] wlp3s0: associated
[186886.493404] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[186886.551021] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[198465.211980] e1000e: enp0s25 NIC Link is Down
[198465.237902] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[198465.393999] PM: suspend entry (deep)
[198465.394002] PM: Syncing filesystems ... done.
[198465.418516] Freezing user space processes ... (elapsed 0.002 seconds) done.
[198465.421386] OOM killer disabled.
[198465.421388] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[198465.422983] Suspending console(s) (use no_console_suspend to debug)
[198465.612220] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[198465.613591] sd 0:0:0:0: [sda] Stopping disk
[198465.660447] e1000e: EEE TX LPI TIMER: 00000011
[198465.921622] ACPI: EC: interrupt blocked
[198465.947802] ACPI: Preparing to enter system sleep state S3
[198465.957452] ACPI: EC: event blocked
[198465.957453] ACPI: EC: EC stopped
[198465.957455] PM: Saving platform NVS memory
[198465.957481] Disabling non-boot CPUs ...
[198465.968169] IRQ 24: no longer affine to CPU1
[198465.969194] smpboot: CPU 1 is now offline
[198465.993782] smpboot: CPU 2 is now offline
[198466.008979] IRQ 26: no longer affine to CPU3
[198466.010015] smpboot: CPU 3 is now offline
[198466.021054] smpboot: CPU 4 is now offline
[198466.040879] IRQ 16: no longer affine to CPU5
[198466.040889] IRQ 23: no longer affine to CPU5
[198466.040897] IRQ 28: no longer affine to CPU5
[198466.041958] smpboot: CPU 5 is now offline
[198466.053989] smpboot: CPU 6 is now offline
[198466.064814] smpboot: CPU 7 is now offline
[198466.068301] ACPI: Low-level resume complete
[198466.068410] ACPI: EC: EC started
[198466.068411] PM: Restoring platform NVS memory
[198466.068931] Enabling non-boot CPUs ...
[198466.069069] x86: Booting SMP configuration:
[198466.069072] smpboot: Booting Node 0 Processor 1 APIC 0x1
[198466.070151] Disabled fast string operations
[198466.072598]  cache: parent cpu1 should not be sleeping
[198466.073218] CPU1 is up
[198466.073302] smpboot: Booting Node 0 Processor 2 APIC 0x2
[198466.074161] Disabled fast string operations
[198466.076566]  cache: parent cpu2 should not be sleeping
[198466.077221] CPU2 is up
[198466.077303] smpboot: Booting Node 0 Processor 3 APIC 0x3
[198466.078164] Disabled fast string operations
[198466.080553]  cache: parent cpu3 should not be sleeping
[198466.081215] CPU3 is up
[198466.081293] smpboot: Booting Node 0 Processor 4 APIC 0x4
[198466.082157] Disabled fast string operations
[198466.084587]  cache: parent cpu4 should not be sleeping
[198466.085358] CPU4 is up
[198466.085522] smpboot: Booting Node 0 Processor 5 APIC 0x5
[198466.085874] Disabled fast string operations
[198466.088184]  cache: parent cpu5 should not be sleeping
[198466.088980] CPU5 is up
[198466.089049] smpboot: Booting Node 0 Processor 6 APIC 0x6
[198466.089907] Disabled fast string operations
[198466.092248]  cache: parent cpu6 should not be sleeping
[198466.093119] CPU6 is up
[198466.093188] smpboot: Booting Node 0 Processor 7 APIC 0x7
[198466.094047] Disabled fast string operations
[198466.096355]  cache: parent cpu7 should not be sleeping
[198466.097227] CPU7 is up
[198466.106116] ACPI: Waking up from system sleep state S3
[198466.121659] ACPI: EC: interrupt unblocked
[198466.134172] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[198466.147143] ACPI: EC: event unblocked
[198466.147755] sd 0:0:0:0: [sda] Starting disk
[198466.369607] usb 2-1.4: reset high-speed USB device number 58 using ehci-pci
[198466.369628] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[198466.447784] usb 2-1.4: device firmware changed
[198466.463150] ata5: SATA link down (SStatus 0 SControl 300)
[198466.463380] ata4: SATA link down (SStatus 0 SControl 300)
[198466.463424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[198466.463526] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[198466.467988] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[198466.467996] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[198466.468002] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[198466.468227] ata1.00: supports DRM functions and may not be fully accessible
[198466.468690] ata1.00: NCQ Send/Recv Log not supported
[198466.470926] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[198466.470934] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[198466.470940] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[198466.471161] ata1.00: supports DRM functions and may not be fully accessible
[198466.471562] ata1.00: NCQ Send/Recv Log not supported
[198466.472059] ata1.00: configured for UDMA/133
[198466.681159] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[198466.682035] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[198466.682042] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[198466.698050] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[198466.699022] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[198466.699029] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[198466.700922] ata2.00: configured for UDMA/100
[198466.705597] firewire_core 0000:0d:00.3: rediscovered device fw0
[198466.739250] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[198467.187279] OOM killer enabled.
[198467.187282] Restarting tasks ... 
[198467.187620] usb 2-1.4: USB disconnect, device number 58
[198467.190016] done.
[198467.195805] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[198467.205061] video LNXVIDEO:00: Restoring backlight state
[198467.205927] PM: suspend exit
[198467.234267] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[198467.277526] usb 2-1.4: new high-speed USB device number 59 using ehci-pci
[198467.357096] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1912
[198467.357104] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
[198467.357108] usb 2-1.4: Product: 㕆㈵朱w
[198467.357112] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[198467.405583] usbhid 2-1.4:1.0: can't add hid device: -71
[198467.405615] usbhid: probe of 2-1.4:1.0 failed with error -71
[198467.429406] usb 2-1.4: USB disconnect, device number 59
[198467.442401] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[198467.445553] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[198467.451898] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[198467.690182] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[198467.771893] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[198467.810491] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[198468.369594] usb 2-1.4: new high-speed USB device number 60 using ehci-pci
[198468.456114] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[198468.456123] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[198468.456128] usb 2-1.4: Product: F5521gw
[198468.456132] usb 2-1.4: Manufacturer: Lenovo
[198468.456136] usb 2-1.4: SerialNumber: 21F6F943D9B03190
[198468.492143] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[198468.493799] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[198468.495549] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[198468.525239] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[198468.526252] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[198468.527880] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[198468.528500] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[198468.934548] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x40000 action 0x6
[198468.934560] ata2.00: waking up from sleep
[198468.934569] ata2: SError: { CommWake }
[198468.934580] ata2: hard resetting link
[198469.096625] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[198469.239779] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[198469.242781] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[198469.243118] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[198469.243124] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[198469.248157] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[198469.248478] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[198469.248483] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[198469.250168] ata2.00: configured for UDMA/100
[198469.251160] ata2: EH complete
[198470.633991] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[198470.635949] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[198470.967644] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[198470.970021] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[198471.030428] wlp3s0: authenticated
[198471.031409] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[198471.032667] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[198471.036354] wlp3s0: associated
[198471.131099] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[198472.095397] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[198474.291599] ata2.00: disabled
[198474.291866] ACPI: \_SB_.PCI0.SAT1.PRT1: undocking
[198479.073221] wlp3s0: deauthenticated from 04:bf:6d:43:c9:af (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[198482.412123] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[198482.415680] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[198482.498288] wlp3s0: authenticated
[198482.499075] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[198482.501005] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[198482.505444] wlp3s0: associated
[198482.599519] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[198525.611614] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[198532.792002] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[198532.795051] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[198532.879253] wlp3s0: authenticated
[198532.880589] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[198532.881738] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[198532.886327] wlp3s0: associated
[198532.979327] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af
[198648.419200] e1000e: enp0s25 NIC Link is Down
[198648.440053] wlp3s0: deauthenticating from 04:bf:6d:43:c9:af by local choice (Reason: 3=DEAUTH_LEAVING)
[198652.683266] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[198652.892911] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[198652.894136] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[198652.900414] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[198653.138450] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[198653.219184] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[198653.269126] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[198656.308742] wlp3s0: authenticate with 04:bf:6d:43:c9:af
[198656.311355] wlp3s0: send auth to 04:bf:6d:43:c9:af (try 1/3)
[198656.370984] wlp3s0: authenticated
[198656.372059] wlp3s0: associate with 04:bf:6d:43:c9:af (try 1/3)
[198656.373339] wlp3s0: RX AssocResp from 04:bf:6d:43:c9:af (capab=0x11 status=0 aid=1)
[198656.377829] wlp3s0: associated
[198656.422745] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[198656.471686] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 04:bf:6d:43:c9:af