[ 33.297447] audit_printk_skb: 198 callbacks suppressed [ 33.297452] type=1400 audit(1470036467.769:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1021 comm="apparmor_parser" [ 33.318328] init: gdm main process (979) killed by TERM signal [ 33.932969] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 33.933215] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.210488] r8169 0000:07:00.0 eth0: link down [ 34.210533] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.211321] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.989750] init: samba-ad-dc main process (1138) terminated with status 1 [ 35.934372] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 35.955977] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 36.057862] wlan0: send auth to 08:96:d7:8b:5a:ca (try 2/3) [ 36.158516] wlan0: authenticated [ 36.161833] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [ 36.187492] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=2) [ 36.187563] wlan0: associated [ 36.187605] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.187654] cfg80211: Calling CRDA for country: DE [ 36.191686] ath: EEPROM regdomain: 0x8114 [ 36.191689] ath: EEPROM indicates we should expect a country code [ 36.191691] ath: doing EEPROM country->regdmn map search [ 36.191692] ath: country maps to regdmn code: 0x37 [ 36.191694] ath: Country alpha2 being used: DE [ 36.191695] ath: Regpair used: 0x37 [ 36.191697] ath: regdomain 0x8114 dynamically updated by country IE [ 36.191721] cfg80211: Regulatory domain changed to country: DE [ 36.191722] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.191724] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.191726] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.191727] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.191729] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 36.191731] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 36.363843] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=2) [ 36.372157] cfg80211: Calling CRDA to update world regulatory domain [ 36.372256] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 36.387671] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 36.387857] cfg80211: World regulatory domain updated: [ 36.387861] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.387863] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.387865] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.387866] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.387868] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.387870] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.399099] wlan0: authenticated [ 36.401719] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [ 36.409387] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=2) [ 36.409452] wlan0: associated [ 36.409509] cfg80211: Calling CRDA for country: DE [ 36.412726] ath: EEPROM regdomain: 0x8114 [ 36.412729] ath: EEPROM indicates we should expect a country code [ 36.412731] ath: doing EEPROM country->regdmn map search [ 36.412732] ath: country maps to regdmn code: 0x37 [ 36.412734] ath: Country alpha2 being used: DE [ 36.412735] ath: Regpair used: 0x37 [ 36.412737] ath: regdomain 0x8114 dynamically updated by country IE [ 36.412762] cfg80211: Regulatory domain changed to country: DE [ 36.412763] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.412765] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.412767] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.412768] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 36.412770] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 36.412772] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 42.367857] init: plymouth-upstart-bridge main process (200) killed by TERM signal [ 62.024686] type=1400 audit(1470036498.160:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2210 comm="apparmor_parser" [ 62.024696] type=1400 audit(1470036498.160:80): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2210 comm="apparmor_parser" [ 62.025260] type=1400 audit(1470036498.160:81): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2210 comm="apparmor_parser" [ 289.969095] perf samples too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 901.028219] perf samples too long (5009 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 1221.878703] systemd-hostnamed[2962]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1757.797609] type=1400 audit(1470038194.648:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3282 comm="apparmor_parser" [ 1757.797621] type=1400 audit(1470038194.648:83): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3282 comm="apparmor_parser" [ 1757.801583] type=1400 audit(1470038194.652:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3282 comm="apparmor_parser" [ 2695.226242] usb 2-1.5: new high-speed USB device number 4 using ehci-pci [ 2695.328517] usb 2-1.5: New USB device found, idVendor=1f85, idProduct=6033 [ 2695.328525] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 2695.328530] usb 2-1.5: Product: tolino [ 2695.328535] usb 2-1.5: Manufacturer: Telekom [ 2695.328540] usb 2-1.5: SerialNumber: 41015746,bcad87cebf9744828ef931cd9435c7ef [ 2695.525152] usb-storage 2-1.5:1.0: USB Mass Storage device detected [ 2695.525243] scsi6 : usb-storage 2-1.5:1.0 [ 2695.525367] usbcore: registered new interface driver usb-storage [ 2696.523075] scsi 6:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [ 2696.525050] scsi 6:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [ 2696.527093] scsi 6:0:0:2: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [ 2696.528574] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2696.528786] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 2696.528979] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 2696.571981] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2696.583952] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 2696.587024] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 2699.242266] sd 6:0:0:0: [sdb] 4425414 512-byte logical blocks: (2.26 GB/2.10 GiB) [ 2699.246506] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2699.260635] sdb: [ 2700.766190] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 2702.203189] systemd-hostnamed[3568]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 2778.190379] sdb: detected capacity change from 2265811968 to 0 [ 2943.937163] usb 1-1.5: new high-speed USB device number 5 using ehci-pci [ 2944.041163] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0159 [ 2944.041172] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2944.041178] usb 1-1.5: Product: USB2.0-CRW [ 2944.041182] usb 1-1.5: Manufacturer: Generic [ 2944.041187] usb 1-1.5: SerialNumber: 20071114173400000 [ 2944.143473] ums-realtek 1-1.5:1.0: USB Mass Storage device detected [ 2944.155772] scsi7 : usb-storage 1-1.5:1.0 [ 2944.155951] usbcore: registered new interface driver ums-realtek [ 2945.155509] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2945.156099] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 2946.092717] sd 7:0:0:0: [sde] 62134272 512-byte logical blocks: (31.8 GB/29.6 GiB) [ 2946.093845] sd 7:0:0:0: [sde] Write Protect is off [ 2946.093853] sd 7:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 2946.094977] sd 7:0:0:0: [sde] No Caching mode page found [ 2946.094984] sd 7:0:0:0: [sde] Assuming drive cache: write through [ 2946.099291] sd 7:0:0:0: [sde] No Caching mode page found [ 2946.099301] sd 7:0:0:0: [sde] Assuming drive cache: write through [ 2946.100405] sde: sde1 [ 2946.103999] sd 7:0:0:0: [sde] No Caching mode page found [ 2946.104002] sd 7:0:0:0: [sde] Assuming drive cache: write through [ 2946.104005] sd 7:0:0:0: [sde] Attached SCSI removable disk [ 2946.344455] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3821.429099] systemd-hostnamed[4047]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 4073.669082] sde: detected capacity change from 31812747264 to 0 [ 4097.046239] usb 1-1.5: USB disconnect, device number 5 [ 4803.814619] systemd-hostnamed[4185]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 5214.725576] usb 1-1.5: new high-speed USB device number 6 using ehci-pci [ 5214.829364] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0159 [ 5214.829372] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5214.829377] usb 1-1.5: Product: USB2.0-CRW [ 5214.829380] usb 1-1.5: Manufacturer: Generic [ 5214.829384] usb 1-1.5: SerialNumber: 20071114173400000 [ 5214.835297] ums-realtek 1-1.5:1.0: USB Mass Storage device detected [ 5214.851033] scsi8 : usb-storage 1-1.5:1.0 [ 5215.851715] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 5215.852299] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 5216.783420] sd 8:0:0:0: [sde] 62134272 512-byte logical blocks: (31.8 GB/29.6 GiB) [ 5216.784409] sd 8:0:0:0: [sde] Write Protect is off [ 5216.784415] sd 8:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 5216.785413] sd 8:0:0:0: [sde] No Caching mode page found [ 5216.785420] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5216.789414] sd 8:0:0:0: [sde] No Caching mode page found [ 5216.789421] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5216.790309] sde: sde1 [ 5216.793664] sd 8:0:0:0: [sde] No Caching mode page found [ 5216.793671] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5216.793676] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 5217.138967] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5217.395920] systemd-hostnamed[4559]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 5266.121928] sde: detected capacity change from 31812747264 to 0 [ 5317.593825] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5317.596540] sd 8:0:0:0: [sde] Asking for cache data failed [ 5317.596549] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5369.278698] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5369.281448] sd 8:0:0:0: [sde] Asking for cache data failed [ 5369.281453] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5420.969646] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5420.972581] sd 8:0:0:0: [sde] Asking for cache data failed [ 5420.972591] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5472.660123] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5472.662986] sd 8:0:0:0: [sde] Asking for cache data failed [ 5472.662995] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5524.350175] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5524.353041] sd 8:0:0:0: [sde] Asking for cache data failed [ 5524.353050] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5576.040499] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5576.043495] sd 8:0:0:0: [sde] Asking for cache data failed [ 5576.043504] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5627.737182] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5627.740160] sd 8:0:0:0: [sde] Asking for cache data failed [ 5627.740169] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5679.420731] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5679.423357] sd 8:0:0:0: [sde] Asking for cache data failed [ 5679.423366] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5731.110862] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5731.113652] sd 8:0:0:0: [sde] Asking for cache data failed [ 5731.113660] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5782.800970] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5782.803709] sd 8:0:0:0: [sde] Asking for cache data failed [ 5782.803718] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5834.491028] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5834.493775] sd 8:0:0:0: [sde] Asking for cache data failed [ 5834.493784] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5841.443307] input: 35:A6:8C:00:51:2E as /devices/virtual/input/input20 [ 5869.660894] input: 35:A6:8C:00:51:2E as /devices/virtual/input/input21 [ 5886.180716] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5886.183464] sd 8:0:0:0: [sde] Asking for cache data failed [ 5886.183473] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5937.870743] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5937.873513] sd 8:0:0:0: [sde] Asking for cache data failed [ 5937.873521] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 5989.565336] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 5989.568186] sd 8:0:0:0: [sde] Asking for cache data failed [ 5989.568195] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6041.251512] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6041.254402] sd 8:0:0:0: [sde] Asking for cache data failed [ 6041.254410] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6092.941939] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6092.944837] sd 8:0:0:0: [sde] Asking for cache data failed [ 6092.944846] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6144.631626] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6144.634516] sd 8:0:0:0: [sde] Asking for cache data failed [ 6144.634525] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6196.322085] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6196.324845] sd 8:0:0:0: [sde] Asking for cache data failed [ 6196.324854] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6248.012665] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6248.015639] sd 8:0:0:0: [sde] Asking for cache data failed [ 6248.015648] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6299.703231] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6299.706067] sd 8:0:0:0: [sde] Asking for cache data failed [ 6299.706075] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6351.392956] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6351.395760] sd 8:0:0:0: [sde] Asking for cache data failed [ 6351.395769] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6403.083348] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6403.086289] sd 8:0:0:0: [sde] Asking for cache data failed [ 6403.086298] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6454.773503] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6454.776387] sd 8:0:0:0: [sde] Asking for cache data failed [ 6454.776397] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6506.463568] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6506.466442] sd 8:0:0:0: [sde] Asking for cache data failed [ 6506.466451] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6558.157502] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6558.160207] sd 8:0:0:0: [sde] Asking for cache data failed [ 6558.160217] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6609.843809] sd 8:0:0:0: [sde] Test WP failed, assume Write Enabled [ 6609.846829] sd 8:0:0:0: [sde] Asking for cache data failed [ 6609.846838] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6619.473185] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [ 6619.742361] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=3) [ 6619.855463] cfg80211: Calling CRDA to update world regulatory domain [ 6620.207588] cfg80211: World regulatory domain updated: [ 6620.207594] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6620.207597] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6620.207599] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6620.207600] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6620.207602] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6620.207604] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6622.108226] PM: Syncing filesystems ... done. [ 6622.309206] PM: Preparing system for mem sleep [ 6622.309407] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6622.310935] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6622.312136] PM: Entering mem sleep [ 6622.312210] Suspending console(s) (use no_console_suspend to debug) [ 6622.312503] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6622.312792] sd 0:0:0:0: [sda] Stopping disk [ 6622.710689] PM: suspend of devices complete after 398.524 msecs [ 6622.726696] PM: late suspend of devices complete after 16.007 msecs [ 6622.726976] r8169 0000:07:00.0: System wakeup enabled by ACPI [ 6622.758732] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 6622.774725] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 6622.806595] PM: noirq suspend of devices complete after 79.930 msecs [ 6622.806751] ACPI: Preparing to enter system sleep state S3 [ 6622.807074] PM: Saving platform NVS memory [ 6622.807673] Disabling non-boot CPUs ... [ 6622.807992] Broke affinity for irq 17 [ 6622.910527] smpboot: CPU 1 is now offline [ 6622.911704] ACPI: Low-level resume complete [ 6622.911760] PM: Restoring platform NVS memory [ 6622.912303] CPU0: Thermal monitoring handled by SMI [ 6622.912333] Enabling non-boot CPUs ... [ 6622.912374] x86: Booting SMP configuration: [ 6622.912375] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 6622.922579] Initializing CPU#1 [ 6622.923420] CPU1: Thermal monitoring handled by SMI [ 6622.925900] CPU1 is up [ 6622.927148] ACPI: Waking up from system sleep state S3 [ 6622.979932] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 6623.011938] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 6623.060064] PM: noirq resume of devices complete after 125.429 msecs [ 6623.062189] PM: early resume of devices complete after 2.097 msecs [ 6623.062367] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 6623.062690] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6623.065068] ath: phy0: ASPM enabled: 0x42 [ 6623.065075] r8169 0000:07:00.0: System wakeup disabled by ACPI [ 6623.379726] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 6623.491697] ata5: SATA link down (SStatus 0 SControl 300) [ 6623.491730] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6623.499687] ata6: SATA link down (SStatus 0 SControl 300) [ 6623.510219] ata2.00: configured for UDMA/100 [ 6623.807556] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 6624.003456] usb 1-1.5: reset high-speed USB device number 6 using ehci-pci [ 6624.334503] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..5012] [ 6625.338910] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6625.343829] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6625.346078] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6625.346467] ata1.00: configured for UDMA/133 [ 6625.362977] sd 0:0:0:0: [sda] Starting disk [ 6625.386317] PM: resume of devices complete after 2325.106 msecs [ 6625.390064] PM: Finishing wakeup. [ 6625.393600] ath9k 0000:03:00.0: no hotplug settings from platform [ 6625.390065] Restarting tasks ... done. [ 6625.397937] usb 2-1.5: USB disconnect, device number 4 [ 6625.659535] video LNXVIDEO:00: Restoring backlight state [ 6626.329454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6626.434686] sd 8:0:0:0: [sde] 62134272 512-byte logical blocks: (31.8 GB/29.6 GiB) [ 6626.436658] sd 8:0:0:0: [sde] No Caching mode page found [ 6626.436662] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6626.439252] sd 8:0:0:0: [sde] No Caching mode page found [ 6626.439255] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6626.440137] sde: sde1 [ 6626.470202] r8169 0000:07:00.0 eth0: link down [ 6626.470249] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6626.897454] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6627.020464] systemd-hostnamed[5721]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 6628.362103] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 6628.381955] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 6628.419399] wlan0: authenticated [ 6628.421575] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [ 6628.429889] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=1) [ 6628.429948] wlan0: associated [ 6628.429992] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6628.430059] cfg80211: Calling CRDA for country: DE [ 6628.433643] ath: EEPROM regdomain: 0x8114 [ 6628.433646] ath: EEPROM indicates we should expect a country code [ 6628.433648] ath: doing EEPROM country->regdmn map search [ 6628.433650] ath: country maps to regdmn code: 0x37 [ 6628.433651] ath: Country alpha2 being used: DE [ 6628.433653] ath: Regpair used: 0x37 [ 6628.433654] ath: regdomain 0x8114 dynamically updated by country IE [ 6628.433681] cfg80211: Regulatory domain changed to country: DE [ 6628.433682] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6628.433684] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6628.433686] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6628.433687] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6628.433689] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 6628.433690] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 6628.500861] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=2) [ 6628.511707] cfg80211: Calling CRDA to update world regulatory domain [ 6628.511908] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 6628.529150] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 6628.530630] cfg80211: World regulatory domain updated: [ 6628.530634] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6628.530636] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6628.530638] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6628.530640] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6628.530641] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6628.530643] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6628.548252] wlan0: authenticated [ 6628.549530] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [ 6628.583363] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=1) [ 6628.583418] wlan0: associated [ 6628.583454] cfg80211: Calling CRDA for country: DE [ 6628.587208] ath: EEPROM regdomain: 0x8114 [ 6628.587211] ath: EEPROM indicates we should expect a country code [ 6628.587213] ath: doing EEPROM country->regdmn map search [ 6628.587215] ath: country maps to regdmn code: 0x37 [ 6628.587216] ath: Country alpha2 being used: DE [ 6628.587217] ath: Regpair used: 0x37 [ 6628.587219] ath: regdomain 0x8114 dynamically updated by country IE [ 6628.587245] cfg80211: Regulatory domain changed to country: DE [ 6628.587247] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6628.587249] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6628.587250] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6628.587252] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6628.587253] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 6628.587255] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 6636.827172] sde: detected capacity change from 31812747264 to 0 [ 6638.962006] usb 1-1.5: USB disconnect, device number 6 [ 8400.874296] systemd-hostnamed[6110]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 8968.921245] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [ 8969.123774] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=3) [ 8969.139317] cfg80211: Calling CRDA to update world regulatory domain [ 8969.145927] cfg80211: World regulatory domain updated: [ 8969.145932] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8969.145934] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8969.145936] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8969.145938] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8969.145940] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8969.145942] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8970.358923] PM: Syncing filesystems ... done. [ 8970.523717] PM: Preparing system for mem sleep [ 8970.523873] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8970.525660] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8970.526875] PM: Entering mem sleep [ 8970.526943] Suspending console(s) (use no_console_suspend to debug) [ 8970.527232] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8970.527527] sd 0:0:0:0: [sda] Stopping disk [ 8970.911805] PM: suspend of devices complete after 384.909 msecs [ 8970.927811] PM: late suspend of devices complete after 16.005 msecs [ 8970.928091] r8169 0000:07:00.0: System wakeup enabled by ACPI [ 8970.959931] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 8970.975963] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 8971.007748] PM: noirq suspend of devices complete after 79.966 msecs [ 8971.007961] ACPI: Preparing to enter system sleep state S3 [ 8971.008327] PM: Saving platform NVS memory [ 8971.008973] Disabling non-boot CPUs ... [ 8971.009265] Broke affinity for irq 23 [ 8971.009268] Broke affinity for irq 40 [ 8971.111651] smpboot: CPU 1 is now offline [ 8971.112880] ACPI: Low-level resume complete [ 8971.112937] PM: Restoring platform NVS memory [ 8971.113475] CPU0: Thermal monitoring handled by SMI [ 8971.113518] Enabling non-boot CPUs ... [ 8971.113559] x86: Booting SMP configuration: [ 8971.113560] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 8971.123763] Initializing CPU#1 [ 8971.124605] CPU1: Thermal monitoring handled by SMI [ 8971.127082] CPU1 is up [ 8971.128341] ACPI: Waking up from system sleep state S3 [ 8971.189077] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 8971.221080] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 8971.269194] PM: noirq resume of devices complete after 125.791 msecs [ 8971.271309] PM: early resume of devices complete after 2.088 msecs [ 8971.271476] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 8971.271667] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8971.272983] ath: phy0: ASPM enabled: 0x42 [ 8971.272990] r8169 0000:07:00.0: System wakeup disabled by ACPI [ 8971.596860] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 8971.708836] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8971.708873] ata5: SATA link down (SStatus 0 SControl 300) [ 8971.716824] ata6: SATA link down (SStatus 0 SControl 300) [ 8971.727357] ata2.00: configured for UDMA/100 [ 8972.024676] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 8972.545188] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..5012] [ 8973.500071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8973.506793] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8973.509037] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 8973.509422] ata1.00: configured for UDMA/133 [ 8973.524150] sd 0:0:0:0: [sda] Starting disk [ 8973.549814] PM: resume of devices complete after 2279.464 msecs [ 8973.553514] PM: Finishing wakeup. [ 8973.555251] ath9k 0000:03:00.0: no hotplug settings from platform [ 8973.553516] Restarting tasks ... done. [ 8973.794479] video LNXVIDEO:00: Restoring backlight state [ 8974.549897] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8974.691407] r8169 0000:07:00.0 eth0: link down [ 8974.699532] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8975.683277] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 8975.708235] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 8975.771254] wlan0: authenticated [ 8975.775125] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [ 8975.879023] wlan0: associate with 08:96:d7:8b:5a:ca (try 2/3) [ 8975.913791] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=1) [ 8975.913852] wlan0: associated [ 8975.913902] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 8975.913979] cfg80211: Calling CRDA for country: DE [ 8975.917810] ath: EEPROM regdomain: 0x8114 [ 8975.917813] ath: EEPROM indicates we should expect a country code [ 8975.917815] ath: doing EEPROM country->regdmn map search [ 8975.917816] ath: country maps to regdmn code: 0x37 [ 8975.917817] ath: Country alpha2 being used: DE [ 8975.917819] ath: Regpair used: 0x37 [ 8975.917820] ath: regdomain 0x8114 dynamically updated by country IE [ 8975.917846] cfg80211: Regulatory domain changed to country: DE [ 8975.917847] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8975.917849] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8975.917851] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8975.917852] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8975.917854] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 8975.917855] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 9280.821471] wlan0: AP 08:96:d7:8b:5a:ca changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz) [ 9990.908506] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [ 9991.110223] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=3) [ 9991.126039] cfg80211: Calling CRDA to update world regulatory domain [ 9991.136057] cfg80211: World regulatory domain updated: [ 9991.136064] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9991.136070] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9991.136074] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9991.136078] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9991.136082] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9991.136086] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9992.208124] PM: Syncing filesystems ... done. [ 9992.382835] PM: Preparing system for mem sleep [ 9992.383016] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9992.384786] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 9992.385645] PM: Entering mem sleep [ 9992.385694] Suspending console(s) (use no_console_suspend to debug) [ 9992.385981] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9992.386321] sd 0:0:0:0: [sda] Stopping disk [ 9992.785424] PM: suspend of devices complete after 399.785 msecs [ 9992.801406] PM: late suspend of devices complete after 15.983 msecs [ 9992.801678] r8169 0000:07:00.0: System wakeup enabled by ACPI [ 9992.833519] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 9992.849550] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 9992.881336] PM: noirq suspend of devices complete after 79.959 msecs [ 9992.881549] ACPI: Preparing to enter system sleep state S3 [ 9992.881916] PM: Saving platform NVS memory [ 9992.882572] Disabling non-boot CPUs ... [ 9992.985246] smpboot: CPU 1 is now offline [ 9992.986444] ACPI: Low-level resume complete [ 9992.986500] PM: Restoring platform NVS memory [ 9992.987042] CPU0: Thermal monitoring handled by SMI [ 9992.987088] Enabling non-boot CPUs ... [ 9992.987129] x86: Booting SMP configuration: [ 9992.987130] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 9992.997333] Initializing CPU#1 [ 9992.998175] CPU1: Thermal monitoring handled by SMI [ 9993.000651] CPU1 is up [ 9993.001912] ACPI: Waking up from system sleep state S3 [ 9993.058664] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 9993.090669] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 9993.138779] PM: noirq resume of devices complete after 127.149 msecs [ 9993.140893] PM: early resume of devices complete after 2.086 msecs [ 9993.142621] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 9993.142989] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 9993.144316] ath: phy0: ASPM enabled: 0x42 [ 9993.144323] r8169 0000:07:00.0: System wakeup disabled by ACPI [ 9993.462466] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 9993.570431] ata6: SATA link down (SStatus 0 SControl 300) [ 9993.570464] ata5: SATA link down (SStatus 0 SControl 300) [ 9993.578420] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9993.597302] ata2.00: configured for UDMA/100 [ 9993.890289] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 9994.414433] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..5012] [ 9995.353670] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9995.355250] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 9995.357469] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 9995.357834] ata1.00: configured for UDMA/133 [ 9995.373756] sd 0:0:0:0: [sda] Starting disk [ 9995.407299] PM: resume of devices complete after 2267.360 msecs [ 9995.411008] PM: Finishing wakeup. [ 9995.411638] ath9k 0000:03:00.0: no hotplug settings from platform [ 9995.411010] Restarting tasks ... done. [ 9995.667111] video LNXVIDEO:00: Restoring backlight state [ 9996.322228] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9996.461006] r8169 0000:07:00.0 eth0: link down [ 9996.461053] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9997.383098] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 9997.407913] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 9997.512755] wlan0: send auth to 08:96:d7:8b:5a:ca (try 2/3) [ 9997.616733] wlan0: send auth to 08:96:d7:8b:5a:ca (try 3/3) [ 9997.720666] wlan0: authentication with 08:96:d7:8b:5a:ca timed out [ 9998.720972] wlan0: authenticate with 08:96:d7:8b:5a:ca [ 9998.743169] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [ 9998.769979] wlan0: authenticated [ 9998.772235] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [ 9998.796654] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=1) [ 9998.796728] wlan0: associated [ 9998.797046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 9998.797152] cfg80211: Calling CRDA for country: DE [ 9998.805182] ath: EEPROM regdomain: 0x8114 [ 9998.805186] ath: EEPROM indicates we should expect a country code [ 9998.805188] ath: doing EEPROM country->regdmn map search [ 9998.805189] ath: country maps to regdmn code: 0x37 [ 9998.805191] ath: Country alpha2 being used: DE [ 9998.805192] ath: Regpair used: 0x37 [ 9998.805194] ath: regdomain 0x8114 dynamically updated by country IE [ 9998.805223] cfg80211: Regulatory domain changed to country: DE [ 9998.805224] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9998.805226] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 9998.805227] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 9998.805229] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 9998.805231] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 9998.805232] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [10302.680556] wlan0: AP 08:96:d7:8b:5a:ca changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz) [10893.406218] usb 2-1.5: new high-speed USB device number 5 using ehci-pci [10893.507912] usb 2-1.5: New USB device found, idVendor=1f85, idProduct=6033 [10893.507920] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [10893.507926] usb 2-1.5: Product: tolino [10893.507931] usb 2-1.5: Manufacturer: Telekom [10893.507936] usb 2-1.5: SerialNumber: 41122870,2a0db9e164f446e0901d79449a8a7a2d [10893.514475] usb-storage 2-1.5:1.0: USB Mass Storage device detected [10893.514701] scsi9 : usb-storage 2-1.5:1.0 [10894.515051] scsi 9:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [10894.517032] scsi 9:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [10894.519043] scsi 9:0:0:2: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 [10894.519633] sd 9:0:0:0: Attached scsi generic sg2 type 0 [10894.520058] sd 9:0:0:1: Attached scsi generic sg3 type 0 [10894.520387] sd 9:0:0:2: Attached scsi generic sg4 type 0 [10894.560028] sd 9:0:0:0: [sdb] Attached SCSI removable disk [10894.574961] sd 9:0:0:1: [sdc] Attached SCSI removable disk [10894.583934] sd 9:0:0:2: [sdd] Attached SCSI removable disk [10896.998341] sd 9:0:0:0: [sdb] 4327110 512-byte logical blocks: (2.21 GB/2.06 GiB) [10897.002597] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [10897.016354] sdb: [10897.379339] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [10897.620164] systemd-hostnamed[7895]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [11031.854878] sdb: detected capacity change from 2215480320 to 0 [11148.331735] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [11148.536015] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=3) [11148.552742] cfg80211: Calling CRDA to update world regulatory domain [11148.559264] cfg80211: World regulatory domain updated: [11148.559269] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [11148.559272] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11148.559274] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11148.559275] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [11148.559277] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11148.559279] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11149.705008] PM: Syncing filesystems ... done. [11149.916299] PM: Preparing system for mem sleep [11149.916507] Freezing user space processes ... (elapsed 0.001 seconds) done. [11149.917873] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11149.919087] PM: Entering mem sleep [11149.919155] Suspending console(s) (use no_console_suspend to debug) [11149.919403] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11149.919795] sd 0:0:0:0: [sda] Stopping disk [11150.313671] PM: suspend of devices complete after 394.560 msecs [11150.329685] PM: late suspend of devices complete after 16.014 msecs [11150.329964] r8169 0000:07:00.0: System wakeup enabled by ACPI [11150.361784] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [11150.377816] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [11150.409619] PM: noirq suspend of devices complete after 79.962 msecs [11150.409832] ACPI: Preparing to enter system sleep state S3 [11150.410202] PM: Saving platform NVS memory [11150.410875] Disabling non-boot CPUs ... [11150.411147] Broke affinity for irq 40 [11150.513533] smpboot: CPU 1 is now offline [11150.514756] ACPI: Low-level resume complete [11150.514813] PM: Restoring platform NVS memory [11150.515353] CPU0: Thermal monitoring handled by SMI [11150.515402] Enabling non-boot CPUs ... [11150.515444] x86: Booting SMP configuration: [11150.515445] smpboot: Booting Node 0 Processor 1 APIC 0x4 [11150.525649] Initializing CPU#1 [11150.526490] CPU1: Thermal monitoring handled by SMI [11150.528968] CPU1 is up [11150.530216] ACPI: Waking up from system sleep state S3 [11150.590932] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [11150.622931] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [11150.671052] PM: noirq resume of devices complete after 127.098 msecs [11150.673170] PM: early resume of devices complete after 2.091 msecs [11150.674878] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [11150.675239] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [11150.676519] ath: phy0: ASPM enabled: 0x42 [11150.676526] r8169 0000:07:00.0: System wakeup disabled by ACPI [11150.998731] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [11151.106693] ata5: SATA link down (SStatus 0 SControl 300) [11151.106726] ata6: SATA link down (SStatus 0 SControl 300) [11151.114681] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [11151.133199] ata2.00: configured for UDMA/100 [11151.426573] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [11151.964096] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..5012] [11152.897929] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11152.912886] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [11152.915090] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [11152.915478] ata1.00: configured for UDMA/133 [11152.930018] sd 0:0:0:0: [sda] Starting disk [11152.955585] PM: resume of devices complete after 2283.375 msecs [11152.959304] PM: Finishing wakeup. [11152.960628] ath9k 0000:03:00.0: no hotplug settings from platform [11152.966461] usb 2-1.5: USB disconnect, device number 5 [11152.959306] Restarting tasks ... done. [11153.217691] video LNXVIDEO:00: Restoring backlight state [11153.770179] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [11153.909287] r8169 0000:07:00.0 eth0: link down [11153.909337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [11154.836777] wlan0: authenticate with 08:96:d7:8b:5a:ca [11154.854229] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [11154.856813] wlan0: authenticated [11154.857112] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [11154.864490] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=1) [11154.864549] wlan0: associated [11154.864592] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [11154.864663] cfg80211: Calling CRDA for country: DE [11154.869203] ath: EEPROM regdomain: 0x8114 [11154.869206] ath: EEPROM indicates we should expect a country code [11154.869208] ath: doing EEPROM country->regdmn map search [11154.869210] ath: country maps to regdmn code: 0x37 [11154.869211] ath: Country alpha2 being used: DE [11154.869213] ath: Regpair used: 0x37 [11154.869214] ath: regdomain 0x8114 dynamically updated by country IE [11154.869242] cfg80211: Regulatory domain changed to country: DE [11154.869243] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [11154.869245] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [11154.869247] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [11154.869248] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [11154.869250] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [11154.869251] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [11458.678369] wlan0: AP 08:96:d7:8b:5a:ca changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz) [11461.194158] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [11461.395803] wlan0: deauthenticating from 08:96:d7:8b:5a:ca by local choice (reason=3) [11461.413708] cfg80211: Calling CRDA to update world regulatory domain [11461.427207] cfg80211: World regulatory domain updated: [11461.427211] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [11461.427214] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11461.427216] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11461.427217] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [11461.427219] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11461.427221] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11463.442293] PM: Syncing filesystems ... done. [11463.612348] PM: Preparing system for mem sleep [11463.612527] Freezing user space processes ... (elapsed 0.001 seconds) done. [11463.614325] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11463.615492] PM: Entering mem sleep [11463.615559] Suspending console(s) (use no_console_suspend to debug) [11463.615861] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11463.616123] sd 0:0:0:0: [sda] Stopping disk [11464.278643] PM: suspend of devices complete after 663.580 msecs [11464.292180] PM: late suspend of devices complete after 13.543 msecs [11464.292457] r8169 0000:07:00.0: System wakeup enabled by ACPI [11464.324285] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [11464.340310] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [11464.372077] PM: noirq suspend of devices complete after 79.966 msecs [11464.372290] ACPI: Preparing to enter system sleep state S3 [11464.372656] PM: Saving platform NVS memory [11464.373346] Disabling non-boot CPUs ... [11464.373639] Broke affinity for irq 17 [11464.373650] Broke affinity for irq 23 [11464.475940] smpboot: CPU 1 is now offline [11464.477123] ACPI: Low-level resume complete [11464.477178] PM: Restoring platform NVS memory [11464.477718] CPU0: Thermal monitoring handled by SMI [11464.477761] Enabling non-boot CPUs ... [11464.477801] x86: Booting SMP configuration: [11464.477802] smpboot: Booting Node 0 Processor 1 APIC 0x4 [11464.488006] Initializing CPU#1 [11464.488847] CPU1: Thermal monitoring handled by SMI [11464.491323] CPU1 is up [11464.492589] ACPI: Waking up from system sleep state S3 [11464.549312] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [11464.581300] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [11464.629387] PM: noirq resume of devices complete after 125.109 msecs [11464.631501] PM: early resume of devices complete after 2.087 msecs [11464.633520] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [11464.634807] ath: phy0: ASPM enabled: 0x42 [11464.634814] r8169 0000:07:00.0: System wakeup disabled by ACPI [11464.731684] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [11464.960914] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [11465.068813] ata5: SATA link down (SStatus 0 SControl 300) [11465.068847] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [11465.076803] ata6: SATA link down (SStatus 0 SControl 300) [11465.087337] ata2.00: configured for UDMA/100 [11465.388520] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [11465.915396] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..5012] [11466.859177] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11466.860743] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [11466.862995] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [11466.863354] ata1.00: configured for UDMA/133 [11466.879226] sd 0:0:0:0: [sda] Starting disk [11466.913781] PM: resume of devices complete after 2284.382 msecs [11466.917496] PM: Finishing wakeup. [11466.918145] ath9k 0000:03:00.0: no hotplug settings from platform [11466.917497] Restarting tasks ... done. [11467.183437] video LNXVIDEO:00: Restoring backlight state [11467.777717] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [11467.917928] r8169 0000:07:00.0 eth0: link down [11467.917974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [11468.855202] wlan0: authenticate with 08:96:d7:8b:5a:ca [11468.872561] wlan0: send auth to 08:96:d7:8b:5a:ca (try 1/3) [11468.875162] wlan0: authenticated [11468.877327] wlan0: associate with 08:96:d7:8b:5a:ca (try 1/3) [11468.981192] wlan0: associate with 08:96:d7:8b:5a:ca (try 2/3) [11469.019583] wlan0: RX AssocResp from 08:96:d7:8b:5a:ca (capab=0x431 status=0 aid=1) [11469.019647] wlan0: associated [11469.019697] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [11469.019769] cfg80211: Calling CRDA for country: DE [11469.023260] ath: EEPROM regdomain: 0x8114 [11469.023264] ath: EEPROM indicates we should expect a country code [11469.023266] ath: doing EEPROM country->regdmn map search [11469.023267] ath: country maps to regdmn code: 0x37 [11469.023269] ath: Country alpha2 being used: DE [11469.023270] ath: Regpair used: 0x37 [11469.023272] ath: regdomain 0x8114 dynamically updated by country IE [11469.023300] cfg80211: Regulatory domain changed to country: DE [11469.023301] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [11469.023303] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [11469.023305] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [11469.023306] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [11469.023308] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [11469.023309] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [11773.995386] wlan0: AP 08:96:d7:8b:5a:ca changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)