[ 0.104737] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d0fff]) [ 0.104737] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-07] only partially covers this bridge [ 0.104737] PCI host bridge to bus 0000:00 [ 0.104737] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.104737] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.104737] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.104737] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfebfffff] [ 0.104737] pci 0000:00:00.0: [10de:0a82] type 00 class 0x060000 [ 0.104737] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000 [ 0.104737] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100 [ 0.104737] pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff] [ 0.104737] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000 [ 0.104737] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500 [ 0.104737] pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf] [ 0.104737] pci 0000:00:03.2: reg 20: [io 0x3040-0x307f] [ 0.104737] pci 0000:00:03.2: reg 24: [io 0x2000-0x203f] [ 26.441954] forcedeth 0000:00:0a.0 eth0: no link during initialization [ 27.716031] hda-intel 0000:00:08.0: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000 [ 27.747507] NVRM: Your system is not currently configured to drive a VGA console [ 27.747510] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 27.747512] NVRM: requires the use of a text-mode VGA console. Use of other console [ 27.747513] NVRM: drivers including, but not limited to, vesafb, may result in [ 27.747515] NVRM: corruption and stability problems, and is not supported. [ 28.724033] hda-intel 0000:00:08.0: Codec #1 probe error; disabling it... [ 30.076225] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input15 [ 30.076359] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input16 [ 475.114771] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 475.114783] Bluetooth: HIDP socket layer initialized [ 672.360788] hid-generic 0005:04B4:0033.0004: unknown main item tag 0x0 [ 672.360898] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input17 [ 672.361038] hid-generic 0005:04B4:0033.0004: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [ 699.128837] cfg80211: Calling CRDA to update world regulatory domain [ 699.135341] cfg80211: World regulatory domain updated: [ 699.135346] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 699.135348] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 699.135350] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 699.135352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 699.135353] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 699.135355] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 700.316353] init: anacron main process (1191) killed by TERM signal [ 703.105638] PM: Syncing filesystems ... done. [ 703.342403] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 703.356127] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 703.372118] Suspending console(s) (use no_console_suspend to debug) [ 703.372603] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 703.372737] sd 0:0:0:0: [sda] Stopping disk [ 703.740102] ACPI: Cannot transition to non-D0 state from D3 [ 703.964152] PM: suspend of devices complete after 591.753 msecs [ 703.964476] PM: late suspend of devices complete after 0.321 msecs [ 704.012052] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI [ 704.028034] ohci_hcd 0000:00:06.0: System wakeup enabled by ACPI [ 704.044035] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [ 704.076242] PM: noirq suspend of devices complete after 111.763 msecs [ 704.076564] ACPI: Preparing to enter system sleep state S3 [ 704.096120] PM: Saving platform NVS memory [ 704.096277] Disabling non-boot CPUs ... [ 704.200016] smpboot: CPU 1 is now offline [ 704.200397] Extended CMOS year: 2000 [ 704.200397] ACPI: Low-level resume complete [ 704.200397] PM: Restoring platform NVS memory [ 704.200397] Extended CMOS year: 2000 [ 704.200397] CPU0: Thermal monitoring handled by SMI [ 704.200397] Enabling non-boot CPUs ... [ 704.200397] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 704.097519] CPU1: Thermal monitoring handled by SMI [ 704.213469] CPU1 is up [ 704.215112] ACPI: Waking up from system sleep state S3 [ 704.264041] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [ 704.280044] ohci_hcd 0000:00:06.0: System wakeup disabled by ACPI [ 704.296038] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI [ 704.296073] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 704.360043] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 704.360045] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [ 704.424266] PM: noirq resume of devices complete after 192.101 msecs [ 704.424410] PM: early resume of devices complete after 0.114 msecs [ 704.424476] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 704.424482] ehci-pci 0000:00:04.1: setting latency timer to 64 [ 704.424497] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 704.424506] ehci-pci 0000:00:06.1: setting latency timer to 64 [ 704.424520] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [ 704.424521] pci 0000:00:09.0: setting latency timer to 64 [ 704.424805] ahci 0000:00:0b.0: setting latency timer to 64 [ 704.424824] pci 0000:00:10.0: setting latency timer to 64 [ 704.424845] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 704.424852] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 704.460718] ACPI: EC: GPE storm detected(12 GPEs), transactions will use polling mode [ 704.676034] usb 2-3: reset high-speed USB device number 2 using ehci-pci [ 704.780043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 704.780060] ata6: SATA link down (SStatus 0 SControl 300) [ 704.780089] ata5: SATA link down (SStatus 0 SControl 300) [ 704.780110] ata3: SATA link down (SStatus 0 SControl 300) [ 704.780134] ata4: SATA link down (SStatus 0 SControl 300) [ 704.806825] ata2.00: configured for UDMA/100 [ 704.980048] firewire_core 0000:01:07.0: rediscovered device fw0 [ 704.984039] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [ 705.073581] Extended CMOS year: 2000 [ 705.356039] usb 3-2: reset full-speed USB device number 2 using ohci_hcd [ 705.563080] snd-usb-audio 3-2:1.0: no reset_resume for driver snd-usb-audio? [ 705.563083] snd-usb-audio 3-2:1.1: no reset_resume for driver snd-usb-audio? [ 705.563085] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [ 705.626078] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [ 705.797091] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [ 707.356046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 707.365767] ata1.00: configured for UDMA/133 [ 707.365896] sd 0:0:0:0: [sda] Starting disk [ 707.374111] PM: resume of devices complete after 2949.697 msecs [ 707.525089] usb 3-4.3: USB disconnect, device number 6 [ 707.516321] Restarting tasks ... done. [ 707.728258] video LNXVIDEO:00: Restoring backlight state [ 707.756906] cannot submit urb (err = -18) [ 707.756908] video LNXVIDEO:01: Restoring backlight state [ 707.757057] cannot submit urb (err = -18) [ 707.757062] cannot submit urb (err = -18) [ 707.757065] cannot submit urb (err = -18) [ 707.757069] cannot submit urb (err = -18) [ 707.757072] cannot submit urb (err = -18) [ 707.757076] cannot submit urb (err = -18) [ 707.757079] cannot submit urb (err = -18) [ 707.758063] delay: estimated 309, actual 1 [ 707.786227] delay: estimated 265, actual 0 [ 707.790331] delay: estimated 177, actual 0 [ 707.799408] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 707.864560] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 707.926215] delay: estimated 90, actual 1 [ 707.927224] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 707.985239] usb 3-4.3: new full-speed USB device number 7 using ohci_hcd [ 707.990970] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 708.095872] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [ 708.095915] forcedeth 0000:00:0a.0 eth0: MSI enabled [ 708.096006] forcedeth 0000:00:0a.0 eth0: no link during initialization [ 708.109072] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156 [ 708.109077] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 708.109079] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card [ 708.109081] usb 3-4.3: Manufacturer: Dell Computer Corp [ 709.021548] hid-generic 0005:04B4:0033.0005: unknown main item tag 0x0 [ 709.021619] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input18 [ 709.022899] hid-generic 0005:04B4:0033.0005: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [ 5581.485591] hid-generic 0005:04B4:0033.0006: unknown main item tag 0x0 [ 5581.485700] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input19 [ 5581.485883] hid-generic 0005:04B4:0033.0006: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [ 7239.130559] hid-generic 0005:04B4:0033.0007: unknown main item tag 0x0 [ 7239.130674] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input20 [ 7239.135883] hid-generic 0005:04B4:0033.0007: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [ 8281.088385] hid-generic 0005:04B4:0033.0008: unknown main item tag 0x0 [ 8281.088461] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input21 [ 8281.092243] hid-generic 0005:04B4:0033.0008: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [ 9411.308519] hid-generic 0005:04B4:0033.0009: unknown main item tag 0x0 [ 9411.308632] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input22 [ 9411.308770] hid-generic 0005:04B4:0033.0009: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [13701.946571] hid-generic 0005:04B4:0033.000A: unknown main item tag 0x0 [13701.946680] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input23 [13701.951455] hid-generic 0005:04B4:0033.000A: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [18685.056577] hid-generic 0005:04B4:0033.000B: unknown main item tag 0x0 [18685.056686] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input24 [18685.058275] hid-generic 0005:04B4:0033.000B: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [21311.884084] empathy-chat[5094]: segfault at 263c46018 ip 00007f2df12fdcdb sp 00007fff6f790f90 error 4 in libc-2.17.so[7f2df127e000+1be000] [23143.363362] hid-generic 0005:04B4:0033.000C: unknown main item tag 0x0 [23143.363436] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input25 [23143.364612] hid-generic 0005:04B4:0033.000C: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [26110.045134] empathy-chat[6051]: segfault at ffff908cd386691a ip 00007f6b707edcd3 sp 00007fff49b61100 error 5 in libc-2.17.so[7f6b7076e000+1be000] [29382.185592] hid-generic 0005:04B4:0033.000D: unknown main item tag 0x0 [29382.185701] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input26 [29382.185902] hid-generic 0005:04B4:0033.000D: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [35542.945556] hid-generic 0005:04B4:0033.000E: unknown main item tag 0x0 [35542.945665] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input27 [35542.947396] hid-generic 0005:04B4:0033.000E: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [37337.527566] hid-generic 0005:04B4:0033.000F: unknown main item tag 0x0 [37337.527676] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input28 [37337.529254] hid-generic 0005:04B4:0033.000F: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [39142.352591] hid-generic 0005:04B4:0033.0010: unknown main item tag 0x0 [39142.352703] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input29 [39142.352848] hid-generic 0005:04B4:0033.0010: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [39884.794393] hid-generic 0005:04B4:0033.0011: unknown main item tag 0x0 [39884.794471] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input30 [39884.795730] hid-generic 0005:04B4:0033.0011: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [49548.963569] hid-generic 0005:04B4:0033.0012: unknown main item tag 0x0 [49548.963680] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input31 [49548.967161] hid-generic 0005:04B4:0033.0012: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [51724.214817] delay: estimated 89, actual 0 [51980.862828] delay: estimated 90, actual 1 [52222.885386] hid-generic 0005:04B4:0033.0013: unknown main item tag 0x0 [52222.885467] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input32 [52222.886626] hid-generic 0005:04B4:0033.0013: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [57205.501830] cfg80211: Calling CRDA to update world regulatory domain [57205.751082] cfg80211: World regulatory domain updated: [57205.751087] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [57205.751089] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [57205.751091] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [57205.751093] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [57205.751095] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [57205.751096] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [57206.886560] init: anacron main process (8918) killed by TERM signal [57209.794273] PM: Syncing filesystems ... done. [57209.802037] Freezing user space processes ... (elapsed 0.07 seconds) done. [57209.880128] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [57209.896140] Suspending console(s) (use no_console_suspend to debug) [57209.896666] sd 0:0:0:0: [sda] Synchronizing SCSI cache [57210.095532] sd 0:0:0:0: [sda] Stopping disk [57210.256151] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3hot [57210.688152] PM: suspend of devices complete after 791.712 msecs [57210.688476] PM: late suspend of devices complete after 0.321 msecs [57210.736051] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI [57210.752034] ohci_hcd 0000:00:06.0: System wakeup enabled by ACPI [57210.768045] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [57210.800244] PM: noirq suspend of devices complete after 111.765 msecs [57210.800567] ACPI: Preparing to enter system sleep state S3 [57210.836123] PM: Saving platform NVS memory [57210.836281] Disabling non-boot CPUs ... [57210.940029] smpboot: CPU 1 is now offline [57210.940455] Extended CMOS year: 2000 [57210.940455] ACPI: Low-level resume complete [57210.940455] PM: Restoring platform NVS memory [57210.940455] Extended CMOS year: 2000 [57210.940455] CPU0: Thermal monitoring handled by SMI [57210.940455] Enabling non-boot CPUs ... [57210.940455] smpboot: Booting Node 0 Processor 1 APIC 0x1 [57210.837603] CPU1: Thermal monitoring handled by SMI [57210.953610] CPU1 is up [57210.955255] ACPI: Waking up from system sleep state S3 [57211.020041] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [57211.036034] ohci_hcd 0000:00:06.0: System wakeup disabled by ACPI [57211.052038] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI [57211.052060] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [57211.116044] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [57211.116045] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [57211.180265] PM: noirq resume of devices complete after 192.090 msecs [57211.180408] PM: early resume of devices complete after 0.113 msecs [57211.180474] ohci_hcd 0000:00:04.0: setting latency timer to 64 [57211.180481] ehci-pci 0000:00:04.1: setting latency timer to 64 [57211.180496] ohci_hcd 0000:00:06.0: setting latency timer to 64 [57211.180504] ehci-pci 0000:00:06.1: setting latency timer to 64 [57211.180521] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [57211.180552] pci 0000:00:09.0: setting latency timer to 64 [57211.180734] pci 0000:00:10.0: setting latency timer to 64 [57211.180833] ahci 0000:00:0b.0: setting latency timer to 64 [57211.180852] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [57211.180863] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [57211.428045] usb 2-3: reset high-speed USB device number 2 using ehci-pci [57211.532053] ata3: SATA link down (SStatus 0 SControl 300) [57211.532101] ata6: SATA link down (SStatus 0 SControl 300) [57211.532140] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [57211.532167] ata4: SATA link down (SStatus 0 SControl 300) [57211.532201] ata5: SATA link down (SStatus 0 SControl 300) [57211.558926] ata2.00: configured for UDMA/100 [57211.736048] firewire_core 0000:01:07.0: rediscovered device fw0 [57211.736059] usb 3-2: reset full-speed USB device number 2 using ohci_hcd [57211.841524] Extended CMOS year: 2000 [57211.943066] snd-usb-audio 3-2:1.0: no reset_resume for driver snd-usb-audio? [57211.943068] snd-usb-audio 3-2:1.1: no reset_resume for driver snd-usb-audio? [57211.943070] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [57212.108049] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [57212.622131] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [57212.790072] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [57214.108038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [57214.124034] ata1.00: configured for UDMA/133 [57214.124148] sd 0:0:0:0: [sda] Starting disk [57214.132393] PM: resume of devices complete after 2951.982 msecs [57214.272404] Restarting tasks ... done. [57214.284059] usb 3-4.3: USB disconnect, device number 7 [57214.476217] video LNXVIDEO:00: Restoring backlight state [57214.504710] video LNXVIDEO:01: Restoring backlight state [57214.552748] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [57214.622382] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [57214.685324] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [57214.749164] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [57214.906049] usb 3-4.3: new full-speed USB device number 8 using ohci_hcd [57214.913830] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [57214.913873] forcedeth 0000:00:0a.0 eth0: MSI enabled [57214.914110] forcedeth 0000:00:0a.0 eth0: no link during initialization [57215.026257] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156 [57215.026261] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [57215.026264] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card [57215.026266] usb 3-4.3: Manufacturer: Dell Computer Corp [57222.799797] hid-generic 0005:04B4:0033.0014: unknown main item tag 0x0 [57222.799907] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input33 [57222.801509] hid-generic 0005:04B4:0033.0014: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [59905.710799] hid-generic 0005:04B4:0033.0015: unknown main item tag 0x0 [59905.710911] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input34 [59905.712462] hid-generic 0005:04B4:0033.0015: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [60817.089371] cfg80211: Calling CRDA to update world regulatory domain [60817.095391] cfg80211: World regulatory domain updated: [60817.095396] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [60817.095400] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60817.095403] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [60817.095406] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [60817.095409] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60817.095411] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60820.898935] PM: Syncing filesystems ... done. [60821.190228] Freezing user space processes ... (elapsed 0.01 seconds) done. [60821.204149] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [60821.220149] Suspending console(s) (use no_console_suspend to debug) [60821.220693] sd 0:0:0:0: [sda] Synchronizing SCSI cache [60821.229643] sd 0:0:0:0: [sda] Stopping disk [60821.580153] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3hot [60821.820136] PM: suspend of devices complete after 599.675 msecs [60821.820465] PM: late suspend of devices complete after 0.326 msecs [60821.868051] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI [60821.884034] ohci_hcd 0000:00:06.0: System wakeup enabled by ACPI [60821.900041] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [60821.932244] PM: noirq suspend of devices complete after 111.776 msecs [60821.932567] ACPI: Preparing to enter system sleep state S3 [60821.968122] PM: Saving platform NVS memory [60821.968281] Disabling non-boot CPUs ... [60822.072026] smpboot: CPU 1 is now offline [60822.072453] Extended CMOS year: 2000 [60822.072453] ACPI: Low-level resume complete [60822.072453] PM: Restoring platform NVS memory [60822.072453] Extended CMOS year: 2000 [60822.072453] CPU0: Thermal monitoring handled by SMI [60822.072453] Enabling non-boot CPUs ... [60822.072453] smpboot: Booting Node 0 Processor 1 APIC 0x1 [60821.969534] CPU1: Thermal monitoring handled by SMI [60822.085517] CPU1 is up [60822.087162] ACPI: Waking up from system sleep state S3 [60822.152041] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [60822.168034] ohci_hcd 0000:00:06.0: System wakeup disabled by ACPI [60822.184038] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI [60822.184060] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [60822.248044] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [60822.248045] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [60822.312267] PM: noirq resume of devices complete after 192.093 msecs [60822.312411] PM: early resume of devices complete after 0.114 msecs [60822.312477] ohci_hcd 0000:00:04.0: setting latency timer to 64 [60822.312495] ehci-pci 0000:00:04.1: setting latency timer to 64 [60822.312510] ohci_hcd 0000:00:06.0: setting latency timer to 64 [60822.312516] ehci-pci 0000:00:06.1: setting latency timer to 64 [60822.312531] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [60822.312535] pci 0000:00:09.0: setting latency timer to 64 [60822.312848] ahci 0000:00:0b.0: setting latency timer to 64 [60822.312871] pci 0000:00:10.0: setting latency timer to 64 [60822.312892] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [60822.312900] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [60822.560053] usb 2-3: reset high-speed USB device number 2 using ehci-pci [60822.664033] ata6: SATA link down (SStatus 0 SControl 300) [60822.664057] ata5: SATA link down (SStatus 0 SControl 300) [60822.664074] ata4: SATA link down (SStatus 0 SControl 300) [60822.664095] ata3: SATA link down (SStatus 0 SControl 300) [60822.664116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [60822.690831] ata2.00: configured for UDMA/100 [60822.868046] firewire_core 0000:01:07.0: rediscovered device fw0 [60822.868059] usb 3-2: reset full-speed USB device number 2 using ohci_hcd [60822.973578] Extended CMOS year: 2000 [60823.075084] snd-usb-audio 3-2:1.0: no reset_resume for driver snd-usb-audio? [60823.075087] snd-usb-audio 3-2:1.1: no reset_resume for driver snd-usb-audio? [60823.075089] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [60823.240039] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [60823.749085] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [60823.921092] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [60825.244041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [60825.259912] ata1.00: configured for UDMA/133 [60825.260045] sd 0:0:0:0: [sda] Starting disk [60825.268251] PM: resume of devices complete after 2955.837 msecs [60825.419141] usb 3-4.3: USB disconnect, device number 8 [60825.408402] Restarting tasks ... done. [60825.624204] video LNXVIDEO:00: Restoring backlight state [60825.654131] video LNXVIDEO:01: Restoring backlight state [60825.655075] delay: estimated 353, actual 0 [60825.689065] delay: estimated 354, actual 1 [60825.695054] delay: estimated 90, actual 1 [60825.701278] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [60825.772008] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [60825.835944] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [60825.900815] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [60825.945060] usb 3-4.3: new full-speed USB device number 9 using ohci_hcd [60826.001567] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [60826.001611] forcedeth 0000:00:0a.0 eth0: MSI enabled [60826.001849] forcedeth 0000:00:0a.0 eth0: no link during initialization [60826.070069] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156 [60826.070073] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [60826.070076] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card [60826.070078] usb 3-4.3: Manufacturer: Dell Computer Corp [60833.926797] hid-generic 0005:04B4:0033.0016: unknown main item tag 0x0 [60833.926904] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input35 [60833.927073] hid-generic 0005:04B4:0033.0016: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [61634.817090] hid-generic 0005:04B4:0033.0017: unknown main item tag 0x0 [61634.817204] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input36 [61634.818555] hid-generic 0005:04B4:0033.0017: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [67777.497042] hid-generic 0005:04B4:0033.0018: unknown main item tag 0x0 [67777.497153] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input37 [67777.498851] hid-generic 0005:04B4:0033.0018: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [67780.081790] hid-generic 0005:04B4:0033.0019: unknown main item tag 0x0 [67780.081864] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input38 [67780.082914] hid-generic 0005:04B4:0033.0019: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [68370.157231] hid-generic 0005:04B4:0033.001A: unknown main item tag 0x0 [68370.157310] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input39 [68370.158579] hid-generic 0005:04B4:0033.001A: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [69122.813033] hid-generic 0005:04B4:0033.001B: unknown main item tag 0x0 [69122.813147] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input40 [69122.815345] hid-generic 0005:04B4:0033.001B: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [69789.714849] hid-generic 0005:04B4:0033.001C: unknown main item tag 0x0 [69789.714924] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input41 [69789.716186] hid-generic 0005:04B4:0033.001C: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [71118.506265] delay: estimated 133, actual 0 [71133.906264] delay: estimated 89, actual 0 [71915.862793] hid-generic 0005:04B4:0033.001D: unknown main item tag 0x0 [71915.862868] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input42 [71915.862987] hid-generic 0005:04B4:0033.001D: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [73271.355845] hid-generic 0005:04B4:0033.001E: unknown main item tag 0x0 [73271.355928] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input43 [73271.358369] hid-generic 0005:04B4:0033.001E: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [75388.520030] hid-generic 0005:04B4:0033.001F: unknown main item tag 0x0 [75388.520142] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input44 [75388.521757] hid-generic 0005:04B4:0033.001F: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [85062.913865] hid-generic 0005:04B4:0033.0020: unknown main item tag 0x0 [85062.913942] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input45 [85062.915423] hid-generic 0005:04B4:0033.0020: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [86649.779262] delay: estimated 90, actual 1 [86844.675263] delay: estimated 90, actual 1 [89650.519888] hid-generic 0005:04B4:0033.0021: unknown main item tag 0x0 [89650.519965] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input46 [89650.521919] hid-generic 0005:04B4:0033.0021: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [94687.396845] hid-generic 0005:04B4:0033.0022: unknown main item tag 0x0 [94687.396922] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input47 [94687.399188] hid-generic 0005:04B4:0033.0022: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [98151.473957] cfg80211: Calling CRDA to update world regulatory domain [98151.588824] cfg80211: World regulatory domain updated: [98151.588828] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [98151.588830] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [98151.588832] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [98151.588834] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [98151.588835] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [98151.588837] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [98152.856128] init: anacron main process (19942) killed by TERM signal [98155.855076] PM: Syncing filesystems ... done. [98155.871454] Freezing user space processes ... (elapsed 0.01 seconds) done. [98155.888160] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [98155.904184] Suspending console(s) (use no_console_suspend to debug) [98155.904971] sd 0:0:0:0: [sda] Synchronizing SCSI cache [98156.079542] sd 0:0:0:0: [sda] Stopping disk [98156.264154] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3hot [98156.672150] PM: suspend of devices complete after 767.656 msecs [98156.672475] PM: late suspend of devices complete after 0.321 msecs [98156.720053] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI [98156.736034] ohci_hcd 0000:00:06.0: System wakeup enabled by ACPI [98156.752035] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [98156.784243] PM: noirq suspend of devices complete after 111.766 msecs [98156.784566] ACPI: Preparing to enter system sleep state S3 [98156.820128] PM: Saving platform NVS memory [98156.820293] Disabling non-boot CPUs ... [98156.924026] smpboot: CPU 1 is now offline [98156.924446] Extended CMOS year: 2000 [98156.924446] ACPI: Low-level resume complete [98156.924446] PM: Restoring platform NVS memory [98156.924446] Extended CMOS year: 2000 [98156.924446] CPU0: Thermal monitoring handled by SMI [98156.924446] Enabling non-boot CPUs ... [98156.924446] smpboot: Booting Node 0 Processor 1 APIC 0x1 [98156.821544] CPU1: Thermal monitoring handled by SMI [98156.937517] CPU1 is up [98156.939163] ACPI: Waking up from system sleep state S3 [98157.004042] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [98157.020035] ohci_hcd 0000:00:06.0: System wakeup disabled by ACPI [98157.036039] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI [98157.036061] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [98157.100045] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [98157.100046] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [98157.164268] PM: noirq resume of devices complete after 192.104 msecs [98157.164412] PM: early resume of devices complete after 0.114 msecs [98157.164479] ohci_hcd 0000:00:04.0: setting latency timer to 64 [98157.164498] ehci-pci 0000:00:04.1: setting latency timer to 64 [98157.164511] ohci_hcd 0000:00:06.0: setting latency timer to 64 [98157.164523] ehci-pci 0000:00:06.1: setting latency timer to 64 [98157.164538] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [98157.164544] pci 0000:00:09.0: setting latency timer to 64 [98157.164826] ahci 0000:00:0b.0: setting latency timer to 64 [98157.164844] pci 0000:00:10.0: setting latency timer to 64 [98157.164864] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [98157.164874] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [98157.412054] usb 2-3: reset high-speed USB device number 2 using ehci-pci [98157.516045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [98157.516062] ata5: SATA link down (SStatus 0 SControl 300) [98157.516091] ata6: SATA link down (SStatus 0 SControl 300) [98157.516112] ata4: SATA link down (SStatus 0 SControl 300) [98157.520037] ata3: SATA link down (SStatus 0 SControl 300) [98157.542754] ata2.00: configured for UDMA/100 [98157.720048] firewire_core 0000:01:07.0: rediscovered device fw0 [98157.720068] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [98157.841605] Extended CMOS year: 2000 [98158.092041] usb 3-2: reset full-speed USB device number 2 using ohci_hcd [98158.299077] snd-usb-audio 3-2:1.0: no reset_resume for driver snd-usb-audio? [98158.299080] snd-usb-audio 3-2:1.1: no reset_resume for driver snd-usb-audio? [98158.299082] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [98158.361085] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [98158.529086] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [98160.148040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [98160.164217] ata1.00: configured for UDMA/133 [98160.164336] sd 0:0:0:0: [sda] Starting disk [98160.172533] PM: resume of devices complete after 3008.118 msecs [98160.323073] usb 3-4.3: USB disconnect, device number 9 [98160.312315] Restarting tasks ... done. [98160.520179] video LNXVIDEO:00: Restoring backlight state [98160.548056] video LNXVIDEO:01: Restoring backlight state [98160.575095] cannot submit urb (err = -18) [98160.577140] cannot submit urb (err = -18) [98160.595004] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [98160.665045] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [98160.729733] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [98160.794080] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [98160.799059] delay: estimated 90, actual 1 [98160.885074] usb 3-4.3: new full-speed USB device number 10 using ohci_hcd [98160.995176] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [98160.995219] forcedeth 0000:00:0a.0 eth0: MSI enabled [98160.995457] forcedeth 0000:00:0a.0 eth0: no link during initialization [98161.006064] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156 [98161.006068] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [98161.006070] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card [98161.006072] usb 3-4.3: Manufacturer: Dell Computer Corp [98170.053819] hid-generic 0005:04B4:0033.0023: unknown main item tag 0x0 [98170.053932] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input48 [98170.055520] hid-generic 0005:04B4:0033.0023: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [103062.275234] hid-generic 0005:04B4:0033.0024: unknown main item tag 0x0 [103062.275344] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input49 [103062.275689] hid-generic 0005:04B4:0033.0024: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [103308.020060] cfg80211: Calling CRDA to update world regulatory domain [103308.156134] cfg80211: World regulatory domain updated: [103308.156139] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [103308.156141] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [103308.156143] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [103308.156145] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [103308.156147] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [103308.156148] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [103312.044415] PM: Syncing filesystems ... done. [103312.064205] Freezing user space processes ... (elapsed 0.01 seconds) done. [103312.080184] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [103312.096168] Suspending console(s) (use no_console_suspend to debug) [103312.096714] sd 0:0:0:0: [sda] Synchronizing SCSI cache [103312.286562] sd 0:0:0:0: [sda] Stopping disk [103312.456151] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3hot [103312.880151] PM: suspend of devices complete after 783.666 msecs [103312.880475] PM: late suspend of devices complete after 0.321 msecs [103312.928051] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI [103312.944034] ohci_hcd 0000:00:06.0: System wakeup enabled by ACPI [103312.960035] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [103312.992245] PM: noirq suspend of devices complete after 111.766 msecs [103312.992567] ACPI: Preparing to enter system sleep state S3 [103313.028121] PM: Saving platform NVS memory [103313.028288] Disabling non-boot CPUs ... [103313.132016] smpboot: CPU 1 is now offline [103313.132444] Extended CMOS year: 2000 [103313.132444] ACPI: Low-level resume complete [103313.132444] PM: Restoring platform NVS memory [103313.132444] Extended CMOS year: 2000 [103313.132444] CPU0: Thermal monitoring handled by SMI [103313.132444] Enabling non-boot CPUs ... [103313.132444] smpboot: Booting Node 0 Processor 1 APIC 0x1 [103313.029544] CPU1: Thermal monitoring handled by SMI [103313.145515] CPU1 is up [103313.147169] ACPI: Waking up from system sleep state S3 [103313.216041] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [103313.232035] ohci_hcd 0000:00:06.0: System wakeup disabled by ACPI [103313.248038] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI [103313.248060] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [103313.312044] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [103313.312045] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [103313.376264] PM: noirq resume of devices complete after 192.095 msecs [103313.376408] PM: early resume of devices complete after 0.114 msecs [103313.376474] ohci_hcd 0000:00:04.0: setting latency timer to 64 [103313.376492] ehci-pci 0000:00:04.1: setting latency timer to 64 [103313.376506] ohci_hcd 0000:00:06.0: setting latency timer to 64 [103313.376513] ehci-pci 0000:00:06.1: setting latency timer to 64 [103313.376527] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [103313.376531] pci 0000:00:09.0: setting latency timer to 64 [103313.376860] ahci 0000:00:0b.0: setting latency timer to 64 [103313.376879] pci 0000:00:10.0: setting latency timer to 64 [103313.376899] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [103313.376910] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [103313.624048] usb 2-3: reset high-speed USB device number 2 using ehci-pci [103313.728055] ata4: SATA link down (SStatus 0 SControl 300) [103313.728086] ata5: SATA link down (SStatus 0 SControl 300) [103313.728112] ata3: SATA link down (SStatus 0 SControl 300) [103313.728133] ata6: SATA link down (SStatus 0 SControl 300) [103313.728157] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [103313.756414] ata2.00: configured for UDMA/100 [103313.932039] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [103313.932062] firewire_core 0000:01:07.0: rediscovered device fw0 [103314.038100] Extended CMOS year: 2000 [103314.304041] usb 3-2: reset full-speed USB device number 2 using ohci_hcd [103314.511080] snd-usb-audio 3-2:1.0: no reset_resume for driver snd-usb-audio? [103314.511083] snd-usb-audio 3-2:1.1: no reset_resume for driver snd-usb-audio? [103314.511085] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [103314.573080] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [103314.741085] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [103316.360035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [103316.374693] ata1.00: configured for UDMA/133 [103316.374807] sd 0:0:0:0: [sda] Starting disk [103316.383029] PM: resume of devices complete after 3006.617 msecs [103316.535072] usb 3-4.3: USB disconnect, device number 10 [103316.524349] Restarting tasks ... done. [103316.740177] video LNXVIDEO:00: Restoring backlight state [103316.767254] video LNXVIDEO:01: Restoring backlight state [103316.827010] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [103316.893596] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [103317.021016] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [103317.073114] usb 3-4.3: new full-speed USB device number 11 using ohci_hcd [103317.089005] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [103317.190396] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156 [103317.190401] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [103317.190403] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card [103317.190405] usb 3-4.3: Manufacturer: Dell Computer Corp [103317.394218] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [103317.394249] forcedeth 0000:00:0a.0 eth0: MSI enabled [103317.394475] forcedeth 0000:00:0a.0 eth0: no link during initialization [103324.996579] hid-generic 0005:04B4:0033.0025: unknown main item tag 0x0 [103324.996656] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input50 [103324.997794] hid-generic 0005:04B4:0033.0025: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [110157.715804] hid-generic 0005:04B4:0033.0026: unknown main item tag 0x0 [110157.715917] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input51 [110157.716654] hid-generic 0005:04B4:0033.0026: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [110871.200062] delay: estimated 90, actual 1 [111786.847067] delay: estimated 90, actual 1 [111982.023057] delay: estimated 89, actual 0 [112628.765516] cfg80211: Calling CRDA to update world regulatory domain [112629.143458] cfg80211: World regulatory domain updated: [112629.143462] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [112629.143464] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [112629.143466] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [112629.143468] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [112629.143470] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [112629.143472] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [112633.724120] PM: Syncing filesystems ... done. [112634.068677] Freezing user space processes ... (elapsed 0.01 seconds) done. [112634.084171] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [112634.100171] Suspending console(s) (use no_console_suspend to debug) [112634.100682] sd 0:0:0:0: [sda] Synchronizing SCSI cache [112634.104796] sd 0:0:0:0: [sda] Stopping disk [112634.460155] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3hot [112634.696160] PM: suspend of devices complete after 595.694 msecs [112634.696481] PM: late suspend of devices complete after 0.318 msecs [112634.744052] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI [112634.760034] ohci_hcd 0000:00:06.0: System wakeup enabled by ACPI [112634.776035] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [112634.808251] PM: noirq suspend of devices complete after 111.767 msecs [112634.808573] ACPI: Preparing to enter system sleep state S3 [112634.844130] PM: Saving platform NVS memory [112634.844291] Disabling non-boot CPUs ... [112634.948015] smpboot: CPU 1 is now offline [112634.948431] Extended CMOS year: 2000 [112634.948431] ACPI: Low-level resume complete [112634.948431] PM: Restoring platform NVS memory [112634.948431] Extended CMOS year: 2000 [112634.948431] CPU0: Thermal monitoring handled by SMI [112634.948431] Enabling non-boot CPUs ... [112634.948431] smpboot: Booting Node 0 Processor 1 APIC 0x1 [112634.845546] CPU1: Thermal monitoring handled by SMI [112634.961503] CPU1 is up [112634.963149] ACPI: Waking up from system sleep state S3 [112635.028041] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [112635.044035] ohci_hcd 0000:00:06.0: System wakeup disabled by ACPI [112635.060038] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI [112635.060060] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [112635.124044] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [112635.124045] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [112635.188268] PM: noirq resume of devices complete after 192.100 msecs [112635.188411] PM: early resume of devices complete after 0.114 msecs [112635.188478] ohci_hcd 0000:00:04.0: setting latency timer to 64 [112635.188496] ehci-pci 0000:00:04.1: setting latency timer to 64 [112635.188510] ohci_hcd 0000:00:06.0: setting latency timer to 64 [112635.188522] ehci-pci 0000:00:06.1: setting latency timer to 64 [112635.188537] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [112635.188542] pci 0000:00:09.0: setting latency timer to 64 [112635.188834] ahci 0000:00:0b.0: setting latency timer to 64 [112635.188852] pci 0000:00:10.0: setting latency timer to 64 [112635.188874] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [112635.188883] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [112635.436059] usb 2-3: reset high-speed USB device number 2 using ehci-pci [112635.540046] ata6: SATA link down (SStatus 0 SControl 300) [112635.540077] ata3: SATA link down (SStatus 0 SControl 300) [112635.540097] ata5: SATA link down (SStatus 0 SControl 300) [112635.540115] ata4: SATA link down (SStatus 0 SControl 300) [112635.544034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [112635.572877] ata2.00: configured for UDMA/100 [112635.744033] usb 3-2: reset full-speed USB device number 2 using ohci_hcd [112635.748048] firewire_core 0000:01:07.0: rediscovered device fw0 [112635.905586] Extended CMOS year: 2000 [112635.954085] snd-usb-audio 3-2:1.0: no reset_resume for driver snd-usb-audio? [112635.954088] snd-usb-audio 3-2:1.1: no reset_resume for driver snd-usb-audio? [112635.954090] snd-usb-audio 3-2:1.2: no reset_resume for driver snd-usb-audio? [112636.116047] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [112636.625081] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [112636.797091] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [112638.172041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [112638.183589] ata1.00: configured for UDMA/133 [112638.183700] sd 0:0:0:0: [sda] Starting disk [112638.191875] PM: resume of devices complete after 3003.460 msecs [112638.332405] Restarting tasks ... done. [112638.341070] usb 3-4.3: USB disconnect, device number 11 [112638.564207] video LNXVIDEO:00: Restoring backlight state [112638.598321] video LNXVIDEO:01: Restoring backlight state [112638.646718] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [112638.762039] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [112638.831010] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [112638.894577] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [112639.009063] usb 3-4.3: new full-speed USB device number 12 using ohci_hcd [112639.129090] usb 3-4.3: New USB device found, idVendor=413c, idProduct=8156 [112639.129095] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112639.129097] usb 3-4.3: Product: Dell Wireless 370 Bluetooth Mini-card [112639.129099] usb 3-4.3: Manufacturer: Dell Computer Corp [112639.249333] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [112639.249375] forcedeth 0000:00:0a.0 eth0: MSI enabled [112639.249613] forcedeth 0000:00:0a.0 eth0: no link during initialization [112751.789583] hid-generic 0005:04B4:0033.0027: unknown main item tag 0x0 [112751.789661] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input52 [112751.790771] hid-generic 0005:04B4:0033.0027: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [120723.823259] hid-generic 0005:04B4:0033.0028: unknown main item tag 0x0 [120723.823377] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input53 [120723.824989] hid-generic 0005:04B4:0033.0028: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [122167.613438] hid-generic 0005:04B4:0033.0029: unknown main item tag 0x0 [122167.613509] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input54 [122167.613628] hid-generic 0005:04B4:0033.0029: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [126021.892956] delay: estimated 90, actual 1 [126473.444961] delay: estimated 90, actual 1 [126766.012958] delay: estimated 89, actual 0 [127038.113520] hid-generic 0005:04B4:0033.002A: unknown main item tag 0x0 [127038.113597] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input55 [127038.115010] hid-generic 0005:04B4:0033.002A: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [127953.346741] hid-generic 0005:04B4:0033.002B: unknown main item tag 0x0 [127953.346852] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:11/input56 [127953.348470] hid-generic 0005:04B4:0033.002B: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e [128770.053688] hid-generic 0005:04B4:0033.002C: unknown main item tag 0x0 [128770.053807] input: Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input57 [128770.054151] hid-generic 0005:04B4:0033.002C: input,hidraw2: BLUETOOTH HID v5.06 Mouse [Bluetooth Laser Mouse] on 70:1a:04:58:c8:9e