installation crashed at grub installation bit

[drunk_in_krakow]

Binary package hint: ubiquity

Traceback (most recent call last):
  File "/usr/bin/ubiquity", line 166, in ?
    main()
  File "/usr/bin/ubiquity", line 161, in main
    install(sys.argv[1])
  File "/usr/bin/ubiquity", line 57, in install
    ret = wizard.run()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
    self.process_step()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
    self.progress_loop()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 628, in progress_loop
    raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
  File "/usr/share/ubiquity/install.py", line 1404, in ?
    install.run()
  File "/usr/share/ubiquity/install.py", line 385, in run
    self.configure_bootloader()
  File "/usr/share/ubiquity/install.py", line 1163, in configure_bootloader
    raise InstallStepError(
InstallStepError: GrubInstaller failed with code 1

---------- contents of /var/log/syslog ---------------------
Feb 24 19:33:00 ubuntu syslogd 1.4.1#18ubuntu6: restart.
Feb 24 19:33:00 ubuntu kernel: Inspecting /boot/System.map-2.6.17-10-generic
Feb 24 19:33:00 ubuntu kernel: Loaded 23624 symbols from /boot/System.map-2.6.17-10-generic.
Feb 24 19:33:00 ubuntu kernel: Symbols match kernel version 2.6.17.
Feb 24 19:33:00 ubuntu kernel: No module symbols loaded - kernel modules not enabled.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Bootdata ok (command line is BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] DMI 2.3 present.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: RSDP (v000 VIAK8T ) @ 0x00000000000f6ee0
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: RSDT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3000
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: FADT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: MADT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff7f00
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: DSDT (v001 VIAK8T AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Number of nodes 1
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] NUMA: Using 63 for the hash shift.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Using node hash shift of 63
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] On node 0 totalpages: 257097
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] DMA zone: 2592 pages, LIFO batch:0
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Processor #0 15:15 APIC version 16
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: IRQ0 used by override.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: IRQ2 used by override.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] ACPI: IRQ9 used by override.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Setting APIC routing to physical flat
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Checking aperture...
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] CPU 0: aperture @ e8000000 size 128 MB
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Built 1 zonelists
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] Initializing CPU#0
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
Feb 24 19:33:00 ubuntu kernel: [ 0.000000] time.c: Detected 1817.946 MHz processor.
Feb 24 19:33:00 ubuntu kernel: [ 24.936839] Console: colour VGA+ 80x25
Feb 24 19:33:00 ubuntu kernel: [ 24.937351] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 24.938043] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 24.946872] Memory: 1020472k/1048512k available (2129k kernel code, 27652k reserved, 1424k data, 188k init)
Feb 24 19:33:00 ubuntu kernel: [ 25.025075] Calibrating delay using timer specific routine.. 3640.17 BogoMIPS (lpj=7280358)
Feb 24 19:33:00 ubuntu kernel: [ 25.025129] Security Framework v1.0.0 initialized
Feb 24 19:33:00 ubuntu kernel: [ 25.025135] SELinux: Disabled at boot.
Feb 24 19:33:00 ubuntu kernel: [ 25.025156] Mount-cache hash table entries: 256
Feb 24 19:33:00 ubuntu kernel: [ 25.025285] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 24 19:33:00 ubuntu kernel: [ 25.025288] CPU: L2 Cache: 512K (64 bytes/line)
Feb 24 19:33:00 ubuntu kernel: [ 25.025291] CPU 0/0(1) -> Node 0 -> Core 0
Feb 24 19:33:00 ubuntu kernel: [ 25.025304] SMP alternatives: switching to UP code
Feb 24 19:33:00 ubuntu kernel: [ 25.025401] Freeing SMP alternatives: 20k freed
Feb 24 19:33:00 ubuntu kernel: [ 25.025525] checking if image is initramfs... it is
Feb 24 19:33:00 ubuntu kernel: [ 25.599098] Freeing initrd memory: 6259k freed
Feb 24 19:33:00 ubuntu kernel: [ 25.602177] ACPI: Core revision 20060707
Feb 24 19:33:00 ubuntu kernel: [ 25.604819] ACPI: Looking for DSDT ... not found!
Feb 24 19:33:00 ubuntu kernel: [ 25.649021] Using local APIC timer interrupts.
Feb 24 19:33:00 ubuntu kernel: [ 25.704006] result 12624633
Feb 24 19:33:00 ubuntu kernel: [ 25.704008] Detected 12.624 MHz APIC timer.
Feb 24 19:33:00 ubuntu kernel: [ 25.704820] Brought up 1 CPUs
Feb 24 19:33:00 ubuntu kernel: [ 25.704942] testing NMI watchdog ... OK.
Feb 24 19:33:00 ubuntu kernel: [ 25.745012] migration_cost=0
Feb 24 19:33:00 ubuntu kernel: [ 25.745234] NET: Registered protocol family 16
Feb 24 19:33:00 ubuntu kernel: [ 25.745258] ACPI: bus type pci registered
Feb 24 19:33:00 ubuntu kernel: [ 25.745264] PCI: Using configuration type 1
Feb 24 19:33:00 ubuntu kernel: [ 25.751961] ACPI: Interpreter enabled
Feb 24 19:33:00 ubuntu kernel: [ 25.751965] ACPI: Using IOAPIC for interrupt routing
Feb 24 19:33:00 ubuntu kernel: [ 25.752494] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 24 19:33:00 ubuntu kernel: [ 25.752497] PCI: Probing PCI hardware (bus 00)
Feb 24 19:33:00 ubuntu kernel: [ 25.755632] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
Feb 24 19:33:00 ubuntu kernel: [ 25.755923] PCI: Quirk-MSI-K8T Soundcard On
Feb 24 19:33:00 ubuntu kernel: [ 25.755925] PCI: Unexpected Value in PCI-Register: no Change!
Feb 24 19:33:00 ubuntu kernel: [ 25.756151] Boot video device is 0000:01:00.0
Feb 24 19:33:00 ubuntu kernel: [ 25.756198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 24 19:33:00 ubuntu kernel: [ 25.819915] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Feb 24 19:33:00 ubuntu kernel: [ 25.820258] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Feb 24 19:33:00 ubuntu kernel: [ 25.820602] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
Feb 24 19:33:00 ubuntu kernel: [ 25.820933] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Feb 24 19:33:00 ubuntu kernel: [ 25.821238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Feb 24 19:33:00 ubuntu kernel: [ 25.821534] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Feb 24 19:33:00 ubuntu kernel: [ 25.821833] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Feb 24 19:33:00 ubuntu kernel: [ 25.822128] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Feb 24 19:33:00 ubuntu kernel: [ 25.822644] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
Feb 24 19:33:00 ubuntu kernel: [ 25.823147] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
Feb 24 19:33:00 ubuntu kernel: [ 25.823508] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
Feb 24 19:33:00 ubuntu kernel: [ 25.823943] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
Feb 24 19:33:00 ubuntu kernel: [ 25.825994] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 24 19:33:00 ubuntu kernel: [ 25.826006] pnp: PnP ACPI init
Feb 24 19:33:00 ubuntu kernel: [ 25.830264] pnp: PnP ACPI: found 12 devices
Feb 24 19:33:00 ubuntu kernel: [ 25.830309] PCI: Using ACPI for IRQ routing
Feb 24 19:33:00 ubuntu kernel: [ 25.830312] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Feb 24 19:33:00 ubuntu kernel: [ 25.830415] agpgart: Detected AGP bridge 0
Feb 24 19:33:00 ubuntu kernel: [ 25.833956] agpgart: AGP aperture is 128M @ 0xe8000000
Feb 24 19:33:00 ubuntu kernel: [ 25.833974] PCI-DMA: Disabling IOMMU.
Feb 24 19:33:00 ubuntu kernel: [ 25.834347] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
Feb 24 19:33:00 ubuntu kernel: [ 25.834351] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Feb 24 19:33:00 ubuntu kernel: [ 25.834528] PCI: Bridge: 0000:00:01.0
Feb 24 19:33:00 ubuntu kernel: [ 25.834530] IO window: disabled.
Feb 24 19:33:00 ubuntu kernel: [ 25.834534] MEM window: f8000000-faffffff
Feb 24 19:33:00 ubuntu kernel: [ 25.834539] PREFETCH window: f0000000-f7ffffff
Feb 24 19:33:00 ubuntu kernel: [ 25.834553] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 24 19:33:00 ubuntu kernel: [ 25.834601] NET: Registered protocol family 2
Feb 24 19:33:00 ubuntu kernel: [ 25.872748] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 25.872931] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 25.873982] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 25.874487] TCP: Hash tables configured (established 131072 bind 65536)
Feb 24 19:33:00 ubuntu kernel: [ 25.874490] TCP reno registered
Feb 24 19:33:00 ubuntu kernel: [ 25.874798] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Feb 24 19:33:00 ubuntu kernel: [ 25.875115] audit: initializing netlink socket (disabled)
Feb 24 19:33:00 ubuntu kernel: [ 25.875124] audit(1172345451.944:1): initialized
Feb 24 19:33:00 ubuntu kernel: [ 25.875257] VFS: Disk quotas dquot_6.5.1
Feb 24 19:33:00 ubuntu kernel: [ 25.875275] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Feb 24 19:33:00 ubuntu kernel: [ 25.875320] Initializing Cryptographic API
Feb 24 19:33:00 ubuntu kernel: [ 25.875324] io scheduler noop registered
Feb 24 19:33:00 ubuntu kernel: [ 25.875330] io scheduler anticipatory registered
Feb 24 19:33:00 ubuntu kernel: [ 25.875337] io scheduler deadline registered
Feb 24 19:33:00 ubuntu kernel: [ 25.875353] io scheduler cfq registered (default)
Feb 24 19:33:00 ubuntu kernel: [ 25.895589] Real Time Clock Driver v1.12ac
Feb 24 19:33:00 ubuntu kernel: [ 25.895623] Linux agpgart interface v0.101 (c) Dave Jones
Feb 24 19:33:00 ubuntu kernel: [ 25.895626] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 24 19:33:00 ubuntu kernel: [ 25.895726] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 19:33:00 ubuntu kernel: [ 25.896222] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 19:33:00 ubuntu kernel: [ 25.896401] mice: PS/2 mouse device common for all mice
Feb 24 19:33:00 ubuntu kernel: [ 25.896888] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
Feb 24 19:33:00 ubuntu kernel: [ 25.897052] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 24 19:33:00 ubuntu kernel: [ 25.897056] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 24 19:33:00 ubuntu kernel: [ 25.897298] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Feb 24 19:33:00 ubuntu kernel: [ 25.897301] PNP: PS/2 controller doesn't have AUX irq; using default 12
Feb 24 19:33:00 ubuntu kernel: [ 25.897502] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 24 19:33:00 ubuntu kernel: [ 25.897515] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 24 19:33:00 ubuntu kernel: [ 25.897713] TCP bic registered
Feb 24 19:33:00 ubuntu kernel: [ 25.897721] NET: Registered protocol family 1
Feb 24 19:33:00 ubuntu kernel: [ 25.897726] NET: Registered protocol family 8
Feb 24 19:33:00 ubuntu kernel: [ 25.897728] NET: Registered protocol family 20
Feb 24 19:33:00 ubuntu kernel: [ 25.897874] ACPI: (supports S0 S3 S4 S5)
Feb 24 19:33:00 ubuntu kernel: [ 25.897915] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Feb 24 19:33:00 ubuntu kernel: [ 25.897935] Freeing unused kernel memory: 188k freed
Feb 24 19:33:00 ubuntu kernel: [ 25.949158] vga16fb: initializing
Feb 24 19:33:00 ubuntu kernel: [ 25.949164] vga16fb: mapped to 0xffff8100000a0000
Feb 24 19:33:00 ubuntu kernel: [ 26.053850] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 24 19:33:00 ubuntu kernel: [ 26.115276] Console: switching to colour frame buffer device 80x25
Feb 24 19:33:00 ubuntu kernel: [ 26.115285] fb0: VGA16 VGA frame buffer device
Feb 24 19:33:00 ubuntu kernel: [ 27.198187] Capability LSM initialized
Feb 24 19:33:00 ubuntu kernel: [ 27.231129] ACPI: Thermal Zone [THRM] (40 C)
Feb 24 19:33:00 ubuntu kernel: [ 27.614532] SCSI subsystem initialized
Feb 24 19:33:00 ubuntu kernel: [ 27.618197] libata version 1.20 loaded.
Feb 24 19:33:00 ubuntu kernel: [ 27.619268] sata_via 0000:00:0f.0: version 1.1
Feb 24 19:33:00 ubuntu kernel: [ 27.619570] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Feb 24 19:33:00 ubuntu kernel: [ 27.619576] GSI 16 sharing vector 0xA9 and IRQ 16
Feb 24 19:33:00 ubuntu kernel: [ 27.619580] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Feb 24 19:33:00 ubuntu kernel: [ 27.619590] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
Feb 24 19:33:00 ubuntu kernel: [ 27.619619] sata_via 0000:00:0f.0: routed to hard irq line 9
Feb 24 19:33:00 ubuntu kernel: [ 27.619663] ata1: SATA max UDMA/133 cmd 0xB000 ctl 0xB402 bmdma 0xC000 irq 169
Feb 24 19:33:00 ubuntu kernel: [ 27.619682] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC008 irq 169
Feb 24 19:33:00 ubuntu kernel: [ 27.904576] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f
Feb 24 19:33:00 ubuntu kernel: [ 27.904582] ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
Feb 24 19:33:00 ubuntu kernel: [ 27.915863] ata1: dev 0 configured for UDMA/133
Feb 24 19:33:00 ubuntu kernel: [ 27.915865] scsi0 : sata_via
Feb 24 19:33:00 ubuntu kernel: [ 28.086346] scsi1 : sata_via
Feb 24 19:33:00 ubuntu kernel: [ 28.086515] Vendor: ATA Model: ST380013AS Rev: 3.18
Feb 24 19:33:00 ubuntu kernel: [ 28.086523] Type: Direct-Access ANSI SCSI revision: 05
Feb 24 19:33:00 ubuntu kernel: [ 28.094320] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Feb 24 19:33:00 ubuntu kernel: [ 28.094330] sda: Write Protect is off
Feb 24 19:33:00 ubuntu kernel: [ 28.094333] sda: Mode Sense: 00 3a 00 00
Feb 24 19:33:00 ubuntu kernel: [ 28.094344] SCSI device sda: drive cache: write back
Feb 24 19:33:00 ubuntu kernel: [ 28.094390] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Feb 24 19:33:00 ubuntu kernel: [ 28.094398] sda: Write Protect is off
Feb 24 19:33:00 ubuntu kernel: [ 28.094400] sda: Mode Sense: 00 3a 00 00
Feb 24 19:33:00 ubuntu kernel: [ 28.094410] SCSI device sda: drive cache: write back
Feb 24 19:33:00 ubuntu kernel: [ 28.094415] sda: sda1 sda2
Feb 24 19:33:00 ubuntu kernel: [ 28.098901] sd 0:0:0:0: Attached scsi disk sda
Feb 24 19:33:00 ubuntu kernel: [ 28.267638] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Feb 24 19:33:00 ubuntu kernel: [ 28.267657] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Feb 24 19:33:00 ubuntu kernel: [ 28.267663] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
Feb 24 19:33:00 ubuntu kernel: [ 28.267687] VP_IDE: chipset revision 6
Feb 24 19:33:00 ubuntu kernel: [ 28.267689] VP_IDE: not 100%% native mode: will probe irqs later
Feb 24 19:33:00 ubuntu kernel: [ 28.267699] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Feb 24 19:33:00 ubuntu kernel: [ 28.267706] ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
Feb 24 19:33:00 ubuntu kernel: [ 28.267719] ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
Feb 24 19:33:00 ubuntu kernel: [ 28.267729] Probing IDE interface ide0...
Feb 24 19:33:00 ubuntu kernel: [ 28.704114] hda: ST340014A, ATA DISK drive
Feb 24 19:33:00 ubuntu kernel: [ 29.543717] hdb: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
Feb 24 19:33:00 ubuntu kernel: [ 29.605440] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 24 19:33:00 ubuntu kernel: [ 29.610373] Probing IDE interface ide1...
Feb 24 19:33:00 ubuntu kernel: [ 30.282614] hdd: SAMSUNG SP1213N, ATA DISK drive
Feb 24 19:33:00 ubuntu kernel: [ 30.343384] ide1 at 0x170-0x177,0x376 on irq 15
Feb 24 19:33:00 ubuntu kernel: [ 30.351462] hda: max request size: 512KiB
Feb 24 19:33:00 ubuntu kernel: [ 30.359528] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Feb 24 19:33:00 ubuntu kernel: [ 30.359976] hda: cache flushes supported
Feb 24 19:33:00 ubuntu kernel: [ 30.360013] hda: hda1 hda2 hda3
Feb 24 19:33:00 ubuntu kernel: [ 30.392826] hdd: max request size: 512KiB
Feb 24 19:33:00 ubuntu kernel: [ 30.392891] hdd: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
Feb 24 19:33:00 ubuntu kernel: [ 30.393249] hdd: cache flushes supported
Feb 24 19:33:00 ubuntu kernel: [ 30.393271] hdd:<6>hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Feb 24 19:33:00 ubuntu kernel: [ 30.394447] Uniform CD-ROM driver Revision: 3.20
Feb 24 19:33:00 ubuntu kernel: [ 30.398214] hdd1
Feb 24 19:33:00 ubuntu kernel: [ 30.721390] usbcore: registered new driver usbfs
Feb 24 19:33:00 ubuntu kernel: [ 30.721410] usbcore: registered new driver hub
Feb 24 19:33:00 ubuntu kernel: [ 30.722344] USB Universal Host Controller Interface driver v3.0
Feb 24 19:33:00 ubuntu kernel: [ 30.722744] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Feb 24 19:33:00 ubuntu kernel: [ 30.722749] GSI 17 sharing vector 0xB1 and IRQ 17
Feb 24 19:33:00 ubuntu kernel: [ 30.722752] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 24 19:33:00 ubuntu kernel: [ 30.722763] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
Feb 24 19:33:00 ubuntu kernel: [ 30.722787] uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 24 19:33:00 ubuntu kernel: [ 30.722905] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Feb 24 19:33:00 ubuntu kernel: [ 30.722934] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000cc00
Feb 24 19:33:00 ubuntu kernel: [ 30.723011] usb usb1: configuration #1 chosen from 1 choice
Feb 24 19:33:00 ubuntu kernel: [ 30.723030] hub 1-0:1.0: USB hub found
Feb 24 19:33:00 ubuntu kernel: [ 30.723036] hub 1-0:1.0: 2 ports detected
Feb 24 19:33:00 ubuntu kernel: [ 30.830453] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 24 19:33:00 ubuntu kernel: [ 30.830460] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
Feb 24 19:33:00 ubuntu kernel: [ 30.830484] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 24 19:33:00 ubuntu kernel: [ 30.830577] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Feb 24 19:33:00 ubuntu kernel: [ 30.830599] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d000
Feb 24 19:33:00 ubuntu kernel: [ 30.830744] usb usb2: configuration #1 chosen from 1 choice
Feb 24 19:33:00 ubuntu kernel: [ 30.830838] hub 2-0:1.0: USB hub found
Feb 24 19:33:00 ubuntu kernel: [ 30.830845] hub 2-0:1.0: 2 ports detected
Feb 24 19:33:00 ubuntu kernel: [ 30.943087] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 24 19:33:00 ubuntu kernel: [ 30.943092] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1
Feb 24 19:33:00 ubuntu kernel: [ 30.943114] uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 24 19:33:00 ubuntu kernel: [ 30.943208] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Feb 24 19:33:00 ubuntu kernel: [ 30.943228] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d400
Feb 24 19:33:00 ubuntu kernel: [ 30.943365] usb usb3: configuration #1 chosen from 1 choice
Feb 24 19:33:00 ubuntu kernel: [ 30.943464] hub 3-0:1.0: USB hub found
Feb 24 19:33:00 ubuntu kernel: [ 30.943471] hub 3-0:1.0: 2 ports detected
Feb 24 19:33:00 ubuntu kernel: [ 31.050262] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 24 19:33:00 ubuntu kernel: [ 31.050268] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
Feb 24 19:33:00 ubuntu kernel: [ 31.050289] uhci_hcd 0000:00:10.3: UHCI Host Controller
Feb 24 19:33:00 ubuntu kernel: [ 31.050385] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Feb 24 19:33:00 ubuntu kernel: [ 31.050403] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d800
Feb 24 19:33:00 ubuntu kernel: [ 31.050542] usb usb4: configuration #1 chosen from 1 choice
Feb 24 19:33:00 ubuntu kernel: [ 31.050636] hub 4-0:1.0: USB hub found
Feb 24 19:33:00 ubuntu kernel: [ 31.050642] hub 4-0:1.0: 2 ports detected
Feb 24 19:33:00 ubuntu kernel: [ 31.158309] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 24 19:33:00 ubuntu kernel: [ 31.158315] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
Feb 24 19:33:00 ubuntu kernel: [ 31.158420] ehci_hcd 0000:00:10.4: EHCI Host Controller
Feb 24 19:33:00 ubuntu kernel: [ 31.158619] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Feb 24 19:33:00 ubuntu kernel: [ 31.158659] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfb000000
Feb 24 19:33:00 ubuntu kernel: [ 31.158666] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 24 19:33:00 ubuntu kernel: [ 31.158816] usb usb5: configuration #1 chosen from 1 choice
Feb 24 19:33:00 ubuntu kernel: [ 31.158924] hub 5-0:1.0: USB hub found
Feb 24 19:33:00 ubuntu kernel: [ 31.158931] hub 5-0:1.0: 8 ports detected
Feb 24 19:33:00 ubuntu kernel: [ 32.360452] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 32.360457] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 32.360461] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 32.360464] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 32.360467] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 32.445459] usb 2-2: new low speed USB device using uhci_hcd and address 2
Feb 24 19:33:00 ubuntu kernel: [ 32.610475] usb 2-2: configuration #1 chosen from 1 choice
Feb 24 19:33:00 ubuntu kernel: [ 32.625149] usbcore: registered new driver hiddev
Feb 24 19:33:00 ubuntu kernel: [ 32.647556] input: HID 1241:1111 as /class/input/input1
Feb 24 19:33:00 ubuntu kernel: [ 32.647644] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:10.1-2
Feb 24 19:33:00 ubuntu kernel: [ 32.647655] usbcore: registered new driver usbhid
Feb 24 19:33:00 ubuntu kernel: [ 32.647658] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Feb 24 19:33:00 ubuntu kernel: [ 33.383875] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 33.383880] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 33.383884] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 33.383888] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 33.383892] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 34.396463] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 34.396467] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 34.396470] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 34.396473] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 34.396475] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 35.657022] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 35.657026] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 35.657029] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 35.657031] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 35.657034] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 36.184648] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 36.184652] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 36.184654] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 36.184657] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 36.184660] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 36.712423] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 36.712427] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 36.712430] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 36.712433] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 36.712435] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 37.843263] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 37.843267] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 37.843270] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 37.843272] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 37.843275] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 38.370995] hdb: command error: status=0x51 { DriveReady SeekComplete Error }
Feb 24 19:33:00 ubuntu kernel: [ 38.370999] hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
Feb 24 19:33:00 ubuntu kernel: [ 38.371002] ide: failed opcode was: unknown
Feb 24 19:33:00 ubuntu kernel: [ 38.371005] end_request: I/O error, dev hdb, sector 1414448
Feb 24 19:33:00 ubuntu kernel: [ 38.371007] Buffer I/O error on device hdb, logical block 353612
Feb 24 19:33:00 ubuntu kernel: [ 39.183338] ISO 9660 Extensions: Microsoft Joliet Level 3
Feb 24 19:33:00 ubuntu kernel: [ 39.339081] ISO 9660 Extensions: RRIP_1991A
Feb 24 19:33:00 ubuntu kernel: [ 39.453324] Registering unionfs 1.1.4
Feb 24 19:33:00 ubuntu kernel: [ 39.466530] loop: loaded (max 8 devices)
Feb 24 19:33:00 ubuntu kernel: [ 39.782620] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Feb 24 19:33:00 ubuntu kernel: [ 119.739244] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Feb 24 19:33:00 ubuntu kernel: [ 119.739883] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
Feb 24 19:33:00 ubuntu kernel: [ 119.739889] GSI 18 sharing vector 0xB9 and IRQ 18
Feb 24 19:33:00 ubuntu kernel: [ 119.739892] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 185
Feb 24 19:33:00 ubuntu kernel: [ 119.739902] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
Feb 24 19:33:00 ubuntu kernel: [ 119.744010] eth0: VIA Rhine II at 0x1e000, 00:11:5b:f0:95:3c, IRQ 185.
Feb 24 19:33:00 ubuntu kernel: [ 119.744718] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Feb 24 19:33:00 ubuntu kernel: [ 136.353550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 24 19:33:00 ubuntu kernel: [ 137.889317] FDC 0 is a post-1991 82077
Feb 24 19:33:00 ubuntu kernel: [ 138.388949] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 24 19:33:00 ubuntu kernel: [ 138.400388] input: PC Speaker as /class/input/input2
Feb 24 19:33:00 ubuntu kernel: [ 138.922935] parport: PnPBIOS parport detected.
Feb 24 19:33:00 ubuntu kernel: [ 138.922983] parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Feb 24 19:33:00 ubuntu kernel: [ 140.745161] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Feb 24 19:33:00 ubuntu kernel: [ 140.745167] GSI 19 sharing vector 0xC1 and IRQ 19
Feb 24 19:33:00 ubuntu kernel: [ 140.745171] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
Feb 24 19:33:00 ubuntu kernel: [ 140.745181] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
Feb 24 19:33:00 ubuntu kernel: [ 140.745330] PCI: Setting latency timer of device 0000:00:11.5 to 64
Feb 24 19:33:00 ubuntu kernel: [ 141.034037] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Feb 24 19:33:00 ubuntu kernel: [ 141.038025] ts: Compaq touchscreen protocol output
Feb 24 19:33:00 ubuntu kernel: [ 141.355237] sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 24 19:33:00 ubuntu kernel: [ 142.188850] NET: Registered protocol family 17
Feb 24 19:33:00 ubuntu kernel: [ 147.302512] NET: Registered protocol family 10
Feb 24 19:33:00 ubuntu kernel: [ 147.302598] lo: Disabled Privacy Extensions
Feb 24 19:33:00 ubuntu kernel: [ 147.302715] IPv6 over IPv4 tunneling driver
Feb 24 19:33:00 ubuntu kernel: [ 151.764755] ACPI: Power Button (FF) [PWRF]
Feb 24 19:33:00 ubuntu kernel: [ 151.764764] ACPI: Power Button (CM) [PWRB]
Feb 24 19:33:00 ubuntu kernel: [ 151.947348] ibm_acpi: ec object not found
Feb 24 19:33:00 ubuntu kernel: [ 151.976933] pcc_acpi: loading...
Feb 24 19:33:00 ubuntu kernel: [ 153.418288] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
Feb 24 19:33:00 ubuntu kernel: [ 153.418311] ACPI Exception (acpi_processor-0240): AE_NOT_FOUND, Evaluating _PSS [20060707]
Feb 24 19:33:00 ubuntu kernel: [ 153.423539] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
Feb 24 19:33:00 ubuntu kernel: [ 153.446211] ACPI Exception (acpi_processor-0240): AE_NOT_FOUND, Evaluating _PSS [20060707]
Feb 24 19:33:04 ubuntu kernel: [ 158.155499] eth0: no IPv6 routers present
Feb 24 19:33:06 ubuntu kernel: [ 159.492108] lp0: using parport0 (interrupt-driven).
Feb 24 19:33:06 ubuntu kernel: [ 160.410987] ppdev: user-space parallel port driver
Feb 24 19:33:13 ubuntu hpiod: 1.6.9 accepting connections at 2208...
Feb 24 19:33:32 ubuntu gconfd (ubuntu-6131): starting (version 2.16.0), pid 6131 user 'ubuntu'
Feb 24 19:33:32 ubuntu gconfd (ubuntu-6131): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Feb 24 19:33:32 ubuntu gconfd (ubuntu-6131): Resolved address "xml:readwrite:/home/ubuntu/.gconf" to a writable configuration source at position 1
Feb 24 19:33:32 ubuntu gconfd (ubuntu-6131): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Feb 24 19:33:32 ubuntu gconfd (ubuntu-6131): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Feb 24 19:33:32 ubuntu gconfd (ubuntu-6131): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Feb 24 19:33:46 ubuntu hcid[6229]: Bluetooth HCI daemon
Feb 24 19:33:46 ubuntu kernel: [ 200.058725] Bluetooth: Core ver 2.8
Feb 24 19:33:46 ubuntu kernel: [ 200.058729] NET: Registered protocol family 31
Feb 24 19:33:46 ubuntu kernel: [ 200.058732] Bluetooth: HCI device and connection manager initialized
Feb 24 19:33:46 ubuntu kernel: [ 200.058745] Bluetooth: HCI socket layer initialized
Feb 24 19:33:46 ubuntu kernel: [ 200.310912] Bluetooth: L2CAP ver 2.8
Feb 24 19:33:46 ubuntu kernel: [ 200.310916] Bluetooth: L2CAP socket layer initialized
Feb 24 19:33:46 ubuntu hcid[6229]: Register path:/org/bluez fallback:1
Feb 24 19:33:46 ubuntu sdpd[6233]: Bluetooth SDP daemon
Feb 24 19:33:47 ubuntu kernel: [ 201.058390] Bluetooth: RFCOMM socket layer initialized
Feb 24 19:33:47 ubuntu kernel: [ 201.058405] Bluetooth: RFCOMM TTY layer initialized
Feb 24 19:33:47 ubuntu kernel: [ 201.058408] Bluetooth: RFCOMM ver 1.7
Feb 24 19:33:49 ubuntu /usr/sbin/cron[6281]: (CRON) INFO (pidfile fd = 3)
Feb 24 19:33:51 ubuntu /usr/sbin/cron[6287]: (CRON) STARTUP (fork ok)
Feb 24 19:33:51 ubuntu /usr/sbin/cron[6287]: (CRON) INFO (Running @reboot jobs)
Feb 24 19:34:16 ubuntu gconfd (ubuntu-6131): Resolved address "xml:readwrite:/home/ubuntu/.gconf" to a writable configuration source at position 0
Feb 24 19:34:52 ubuntu ubiquity[6474]: Ubiquity 1.2.5
Feb 24 19:34:58 ubuntu ubiquity[6474]: log-output -t ubiquity laptop-detect
Feb 24 19:35:02 ubuntu ubiquity[6474]: switched to page stepLanguage
Feb 24 19:35:03 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/localechooser/localechooser']' for ubiquity.components.language.Language
Feb 24 19:35:03 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^languagechooser/language-name, ^countrychooser/shortlist$
Feb 24 19:35:05 ubuntu localechooser: info: LANGNAME=English
Feb 24 19:35:05 ubuntu localechooser: info: line=English;0;en;US;en_US.UTF-8;UTF-8;;kbd=lat0-sun16(utf8)
Feb 24 19:35:05 ubuntu localechooser: info: Set debian-installer/language = 'en'
Feb 24 19:35:05 ubuntu localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Feb 24 19:35:05 ubuntu localechooser: info: Set debian-installer/fallbacklocale = 'en_US.UTF-8'
Feb 24 19:35:05 ubuntu localechooser: info: Set debian-installer/country = 'US'
Feb 24 19:35:05 ubuntu localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Feb 24 19:35:05 ubuntu localechooser: info: Set debconf/language = 'en'
Feb 24 19:35:06 ubuntu localechooser: info: Set countrychooser/country-name = 'United States'
Feb 24 19:35:06 ubuntu localechooser: info: Set debian-installer/country = 'US'
Feb 24 19:35:06 ubuntu localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Feb 24 19:35:06 ubuntu ubiquity[6474]: debconffilter_done: Language (current: Language)
Feb 24 19:35:06 ubuntu ubiquity[6474]: Step_before = stepLanguage
Feb 24 19:35:06 ubuntu ubiquity[6474]: switched to page stepLocation
Feb 24 19:35:06 ubuntu ubiquity[6474]: Step_after = stepLocation
Feb 24 19:35:07 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/tzsetup']' for ubiquity.components.timezone.Timezone
Feb 24 19:35:07 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^time/zone$
Feb 24 19:35:11 ubuntu localechooser: info: Locale has been preseeded to en_GB.UTF-8
Feb 24 19:35:11 ubuntu localechooser: info: Set languagechooser/language-name = 'English'
Feb 24 19:35:11 ubuntu localechooser: info: Set countrychooser/shortlist-en = 'GB'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/locale = 'en_GB.UTF-8'
Feb 24 19:35:11 ubuntu localechooser: info: LANGNAME=English
Feb 24 19:35:11 ubuntu localechooser: info: line=English;0;en;US;en_US.UTF-8;UTF-8;;kbd=lat0-sun16(utf8)
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/language = 'en'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/fallbacklocale = 'en_US.UTF-8'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/country = 'US'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Feb 24 19:35:11 ubuntu localechooser: info: Set debconf/language = 'en'
Feb 24 19:35:11 ubuntu localechooser: info: Set countrychooser/country-name = 'United States'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/country = 'US'
Feb 24 19:35:11 ubuntu localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Feb 24 19:35:12 ubuntu ubiquity[6474]: debconffilter_done: Timezone (current: Timezone)
Feb 24 19:35:12 ubuntu ubiquity[6474]: Step_before = stepLocation
Feb 24 19:35:12 ubuntu ubiquity[6474]: switched to page stepKeyboardConf
Feb 24 19:35:12 ubuntu ubiquity[6474]: Step_after = stepKeyboardConf
Feb 24 19:35:12 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/console-setup/console-setup.postinst', 'configure']' for ubiquity.components.console_setup.ConsoleSetup
Feb 24 19:35:12 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^console-setup/layout, ^console-setup/variant
Feb 24 19:35:13 ubuntu ubiquity[6474]: ubiquity: Setting keyboard layout: pc105 us []
Feb 24 19:35:13 ubuntu ubiquity[6474]: log-output -t ubiquity setxkbmap -model pc105 -layout us
Feb 24 19:35:15 ubuntu ubiquity: Your console configuration will be updated the next time your system boots.
Feb 24 19:35:15 ubuntu ubiquity: If you want to update it now, run 'setupcon' from a virtual console.
Feb 24 19:35:15 ubuntu ubiquity[6474]: log-output -t ubiquity setxkbmap -model pc105 -layout us -option lv3:ralt_switch
Feb 24 19:35:15 ubuntu ubiquity[6474]: debconffilter_done: ConsoleSetup (current: ConsoleSetup)
Feb 24 19:35:15 ubuntu ubiquity[6474]: Step_before = stepKeyboardConf
Feb 24 19:35:15 ubuntu ubiquity[6474]: switched to page stepUserInfo
Feb 24 19:35:15 ubuntu ubiquity[6474]: Step_after = stepUserInfo
Feb 24 19:35:15 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/user-setup/user-setup-ask', '/target']' for ubiquity.components.usersetup.UserSetup
Feb 24 19:35:15 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^passwd/user-fullname$, ^passwd/username$, ^passwd/user-password$, ^passwd/user-password-again$, ERROR
Feb 24 19:35:16 ubuntu ubiquity[6474]: switched to page stepKeyboardConf
Feb 24 19:35:16 ubuntu ubiquity[6474]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/user-setup/user-setup-ask', '/target'] exited with code 10
Feb 24 19:35:16 ubuntu ubiquity[6474]: debconffilter_done: UserSetup (current: UserSetup)
Feb 24 19:35:17 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/console-setup/console-setup.postinst', 'configure']' for ubiquity.components.console_setup.ConsoleSetup
Feb 24 19:35:17 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^console-setup/layout, ^console-setup/variant
Feb 24 19:35:17 ubuntu ubiquity[6474]: ubiquity: Setting keyboard layout: pc105 us []
Feb 24 19:35:17 ubuntu ubiquity[6474]: log-output -t ubiquity setxkbmap -model pc105 -layout us
Feb 24 19:35:17 ubuntu ubiquity[6474]: ubiquity: Setting keyboard layout: pc105 gb []
Feb 24 19:35:17 ubuntu ubiquity[6474]: log-output -t ubiquity setxkbmap -model pc105 -layout gb
Feb 24 19:35:18 ubuntu ubiquity: Your console configuration will be updated the next time your system boots.
Feb 24 19:35:18 ubuntu ubiquity: If you want to update it now, run 'setupcon' from a virtual console.
Feb 24 19:35:18 ubuntu ubiquity[6474]: log-output -t ubiquity setxkbmap -model pc105 -layout gb -option lv3:ralt_switch
Feb 24 19:35:19 ubuntu ubiquity[6474]: debconffilter_done: ConsoleSetup (current: ConsoleSetup)
Feb 24 19:35:19 ubuntu ubiquity[6474]: Step_before = stepKeyboardConf
Feb 24 19:35:19 ubuntu ubiquity[6474]: switched to page stepUserInfo
Feb 24 19:35:19 ubuntu ubiquity[6474]: Step_after = stepUserInfo
Feb 24 19:35:19 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/user-setup/user-setup-ask', '/target']' for ubiquity.components.usersetup.UserSetup
Feb 24 19:35:19 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^passwd/user-fullname$, ^passwd/username$, ^passwd/user-password$, ^passwd/user-password-again$, ERROR
Feb 24 19:35:31 ubuntu ubiquity[6474]: debconffilter_done: UserSetup (current: UserSetup)
Feb 24 19:35:31 ubuntu ubiquity[6474]: Step_before = stepUserInfo
Feb 24 19:35:31 ubuntu ubiquity[6474]: switched to page stepPartDisk
Feb 24 19:35:31 ubuntu ubiquity[6474]: Step_after = stepPartDisk
Feb 24 19:35:32 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.components.partman_auto.PartmanAuto
Feb 24 19:35:32 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^partman-auto/select_disk$, ^partman-auto/.*automatically_partition$, ^partman-partitioning/new_size$, ^partman/choose_partition$, ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Feb 24 19:35:32 ubuntu ubiquity: unsupported
Feb 24 19:35:32 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 24 19:35:32 ubuntu kernel: [ 305.905083] NTFS driver 2.1.27 [Flags: R/O MODULE].
Feb 24 19:35:32 ubuntu ubiquity: kernelmodules_ext3
Feb 24 19:35:32 ubuntu ubiquity: kernelmodules_jfs
Feb 24 19:35:32 ubuntu kernel: [ 306.237981] JFS: nTxBlock = 8022, nTxLock = 64183
Feb 24 19:35:32 ubuntu ubiquity: kernelmodules_reiserfs
Feb 24 19:35:33 ubuntu ubiquity: kernelmodules_xfs
Feb 24 19:35:33 ubuntu kernel: [ 306.597557] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Feb 24 19:35:33 ubuntu kernel: [ 306.597919] SGI XFS Quota Management subsystem
Feb 24 19:35:33 ubuntu ubiquity: umount_target
Feb 24 19:35:33 ubuntu ubiquity: parted
Feb 24 19:35:33 ubuntu ubiquity: dump
Feb 24 19:35:33 ubuntu ubiquity: update_partitions
Feb 24 19:35:34 ubuntu ubiquity: filesystems_detected
Feb 24 19:35:34 ubuntu ubiquity: auto_mountpoints
Feb 24 19:35:35 ubuntu ubiquity: autouse_swap
Feb 24 19:35:35 ubuntu ubiquity: backup
Feb 24 19:35:43 ubuntu ubiquity[6474]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman'] exited with code 10
Feb 24 19:35:43 ubuntu ubiquity[6474]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Feb 24 19:35:43 ubuntu ubiquity[6474]: Step_before = stepPartDisk
Feb 24 19:35:43 ubuntu ubiquity[6474]: gparted_loop()
Feb 24 19:35:43 ubuntu ubiquity[6474]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 35657565
Feb 24 19:35:56 ubuntu ubiquity[6474]: switched to page stepPartAdvanced
Feb 24 19:35:56 ubuntu ubiquity[6474]: Step_after = stepPartAdvanced
Feb 24 19:36:04 ubuntu ubiquity[6474]: Step_before = stepPartAdvanced
Feb 24 19:36:04 ubuntu ubiquity[6474]: gparted replied: 0 OK
Feb 24 19:36:05 ubuntu ubiquity[6474]: switched to page stepPartMountpoints
Feb 24 19:36:05 ubuntu ubiquity[6474]: Step_after = stepPartMountpoints
Feb 24 19:36:40 ubuntu ubiquity[6474]: Step_before = stepPartMountpoints
Feb 24 19:36:40 ubuntu ubiquity[6474]: mountpoints: {'/dev/hdd1': ('/media/hdd1', False, None, None), '/dev/hda1': ('/media/hda1', False, None, None), '/dev/sda1': ('/media/sda1', False, None, None), '/dev/sda2': ('/boot', True, None, None)}
Feb 24 19:36:40 ubuntu ubiquity[6474]: Step_after = stepPartMountpoints
Feb 24 19:36:43 ubuntu ubiquity[6474]: gparted_loop()
Feb 24 19:36:43 ubuntu ubiquity[6474]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 35661550
Feb 24 19:36:53 ubuntu ubiquity[6474]: switched to page stepPartAdvanced
Feb 24 19:36:55 ubuntu ubiquity[6474]: Step_before = stepPartAdvanced
Feb 24 19:36:55 ubuntu ubiquity[6474]: gparted replied: 0 OK
Feb 24 19:36:56 ubuntu ubiquity[6474]: switched to page stepPartMountpoints
Feb 24 19:36:56 ubuntu ubiquity[6474]: Step_after = stepPartMountpoints
Feb 24 19:37:05 ubuntu ubiquity[6474]: Step_before = stepPartMountpoints
Feb 24 19:37:05 ubuntu ubiquity[6474]: mountpoints: {'/dev/hda1': ('/media/hda1', False, None, None), '/dev/hda3': ('swap', True, None, None), '/dev/hda2': ('/', True, None, None), '/dev/hdd1': ('/media/hdd1', False, None, None), '/dev/sda1': ('/media/sda1', False, None, None), '/dev/sda2': ('/boot', True, None, None)}
Feb 24 19:37:05 ubuntu ubiquity[6474]: switched to page stepReady
Feb 24 19:37:05 ubuntu ubiquity[6474]: Step_after = stepReady
Feb 24 19:37:06 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
Feb 24 19:37:06 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Feb 24 19:37:06 ubuntu ubiquity: unsupported
Feb 24 19:37:06 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 24 19:37:06 ubuntu ubiquity: kernelmodules_ext3
Feb 24 19:37:06 ubuntu ubiquity: kernelmodules_jfs
Feb 24 19:37:06 ubuntu ubiquity: kernelmodules_reiserfs
Feb 24 19:37:06 ubuntu ubiquity: kernelmodules_xfs
Feb 24 19:37:06 ubuntu ubiquity: umount_target
Feb 24 19:37:06 ubuntu ubiquity: parted
Feb 24 19:37:06 ubuntu ubiquity: dump
Feb 24 19:37:06 ubuntu ubiquity: update_partitions
Feb 24 19:37:07 ubuntu ubiquity: filesystems_detected
Feb 24 19:37:07 ubuntu ubiquity: auto_mountpoints
Feb 24 19:37:07 ubuntu ubiquity: autouse_swap
Feb 24 19:37:07 ubuntu ubiquity: backup
Feb 24 19:37:08 ubuntu ubiquity[6474]: debconffilter_done: Summary (current: Summary)
Feb 24 19:37:10 ubuntu ubiquity[6474]: switched to page stepPartMountpoints
Feb 24 19:37:16 ubuntu ubiquity[6474]: Step_before = stepPartMountpoints
Feb 24 19:37:16 ubuntu ubiquity[6474]: mountpoints: {'/dev/hda1': ('/media/hda1', False, None, None), '/dev/hda3': ('swap', True, None, None), '/dev/hda2': ('/', True, None, None), '/dev/hdd1': ('/media/hdd1', False, None, None), '/dev/sda1': ('/media/sda1', False, None, None), '/dev/sda2': ('/boot', True, None, None)}
Feb 24 19:37:16 ubuntu ubiquity[6474]: switched to page stepReady
Feb 24 19:37:16 ubuntu ubiquity[6474]: Step_after = stepReady
Feb 24 19:37:17 ubuntu ubiquity[6474]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
Feb 24 19:37:17 ubuntu ubiquity[6474]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Feb 24 19:37:17 ubuntu ubiquity: unsupported
Feb 24 19:37:17 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 24 19:37:17 ubuntu ubiquity: kernelmodules_ext3
Feb 24 19:37:17 ubuntu ubiquity: kernelmodules_jfs
Feb 24 19:37:17 ubuntu ubiquity: kernelmodules_reiserfs
Feb 24 19:37:17 ubuntu ubiquity: kernelmodules_xfs
Feb 24 19:37:17 ubuntu ubiquity: umount_target
Feb 24 19:37:17 ubuntu ubiquity: parted
Feb 24 19:37:17 ubuntu ubiquity: dump
Feb 24 19:37:17 ubuntu ubiquity: update_partitions
Feb 24 19:37:18 ubuntu ubiquity: filesystems_detected
Feb

[Colin Watson (cjwatson)]

"(sda2)" isn't a legal GRUB device name; you probably meant "/dev/sda2" or "(hd0,1)". Bug 90575 reports the lack of validation here.