Ubuntu
ubiquity package

installer crashed

Bug #84303 reported by mooy
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
ubiquity (Ubuntu)
Invalid
Undecided
Unassigned

Bug Description

Binary package hint: ubiquity

installation swedish ubuntu 6.10 nordic
made manual format ext2 and swap no problem
them waited for it to finish

The ethernet card works fine. Im using it now as I d this.

output:
Traceback (most recent call last):
  File "/usr/bin/ubiquity", line 166, in ?
    main()
  File "/usr/bin/ubiquity", line 161, in main
    install(sys.argv[1])
  File "/usr/bin/ubiquity", line 57, in install
    ret = wizard.run()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
    self.process_step()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
    self.progress_loop()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 628, in progress_loop
    raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
  File "/usr/share/ubiquity/install.py", line 1404, in ?
    install.run()
  File "/usr/share/ubiquity/install.py", line 306, in run
    self.copy_all()
  File "/usr/share/ubiquity/install.py", line 470, in copy_all
    os.symlink(linkto, targetpath)
OSError: [Errno 1] Operation not permitted

/var/log/syslog:
Feb 9 23:53:24 ubuntu kernel: [17180200.692000] eth1: interface reset failure
Feb 9 23:53:24 ubuntu kernel: [17180200.692000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 9 23:55:14 ubuntu kernel: [17180310.496000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 9 23:55:14 ubuntu kernel: [17180310.496000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 9 23:55:14 ubuntu kernel: [17180310.496000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 9 23:55:27 ubuntu kernel: [17180324.196000] eth1: resetting device...
Feb 9 23:55:27 ubuntu kernel: [17180324.196000] eth1: uploading firmware...
Feb 9 23:55:27 ubuntu kernel: [17180324.280000] eth1: firmware version: 1.0.4.3
Feb 9 23:55:27 ubuntu kernel: [17180324.280000] eth1: firmware upload complete
Feb 9 23:55:28 ubuntu kernel: [17180325.280000] eth1: no 'reset complete' IRQ seen - retrying
Feb 9 23:55:29 ubuntu kernel: [17180326.280000] eth1: no 'reset complete' IRQ seen - retrying
Feb 9 23:55:29 ubuntu kernel: [17180326.280000] eth1: interface reset failure
Feb 9 23:55:29 ubuntu kernel: [17180326.280000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 9 23:55:48 ubuntu ubiquity[7047]: Step_before = stepPartAdvanced
Feb 9 23:55:51 ubuntu NetworkManager: <debug info>^I[1171065351.338876] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_6853_5BA9').
Feb 9 23:55:52 ubuntu NetworkManager: <debug info>^I[1171065352.727960] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_6853_5BA9').
Feb 9 23:55:52 ubuntu kernel: [17180349.076000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Feb 9 23:55:57 ubuntu NetworkManager: <debug info>^I[1171065357.657137] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_part5_size_3364107264').
Feb 9 23:56:00 ubuntu NetworkManager: <debug info>^I[1171065360.043236] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_part5_size_3364107264').
Feb 9 23:56:00 ubuntu NetworkManager: <debug info>^I[1171065360.158709] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_part5_size_3364107264').
Feb 9 23:56:27 ubuntu NetworkManager: <debug info>^I[1171065387.489815] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_part5_size_3364107264').
Feb 9 23:56:27 ubuntu NetworkManager: <debug info>^I[1171065387.541443] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_part5_size_3364107264').
Feb 9 23:56:27 ubuntu ubiquity[7047]: gparted replied: - FORMAT /dev/sde1 fat32
Feb 9 23:56:27 ubuntu ubiquity[7047]: gparted replied: - FORMAT /dev/sde5 linux-swap
Feb 9 23:56:27 ubuntu ubiquity[7047]: gparted replied: 0 OK
Feb 9 23:56:27 ubuntu ubiquity[7047]: switched to page stepPartMountpoints
Feb 9 23:56:27 ubuntu ubiquity[7047]: Step_after = stepPartMountpoints
Feb 9 23:57:11 ubuntu ubiquity[7047]: Step_before = stepPartMountpoints
Feb 9 23:57:11 ubuntu ubiquity[7047]: mountpoints: {'/dev/sde1': ('/', True, 'fat32', []), '/dev/sde5': ('swap', True, 'linux-swap', [])}
Feb 9 23:57:11 ubuntu ubiquity[7047]: switched to page stepReady
Feb 9 23:57:11 ubuntu ubiquity[7047]: Step_after = stepReady
Feb 9 23:57:11 ubuntu ubiquity[7047]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
Feb 9 23:57:11 ubuntu ubiquity[7047]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Feb 9 23:57:11 ubuntu ubiquity: unsupported
Feb 9 23:57:11 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 9 23:57:11 ubuntu ubiquity: kernelmodules_ext3
Feb 9 23:57:11 ubuntu ubiquity: kernelmodules_jfs
Feb 9 23:57:11 ubuntu ubiquity: kernelmodules_reiserfs
Feb 9 23:57:11 ubuntu ubiquity: kernelmodules_xfs
Feb 9 23:57:11 ubuntu ubiquity: umount_target
Feb 9 23:57:11 ubuntu ubiquity: parted
Feb 9 23:57:12 ubuntu ubiquity: dump
Feb 9 23:57:12 ubuntu ubiquity: update_partitions
Feb 9 23:57:12 ubuntu ubiquity: filesystems_detected
Feb 9 23:57:12 ubuntu ubiquity: auto_mountpoints
Feb 9 23:57:12 ubuntu ubiquity: autouse_swap
Feb 9 23:57:12 ubuntu ubiquity: backup
Feb 9 23:57:12 ubuntu kernel: [17180428.712000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 9 23:57:12 ubuntu kernel: [17180428.712000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 9 23:57:12 ubuntu kernel: [17180428.712000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 9 23:57:12 ubuntu ubiquity[7047]: summary_device_button missing (broken ubiquity/summary/grub translation?)
Feb 9 23:57:12 ubuntu ubiquity[7047]: debconffilter_done: Summary (current: Summary)
Feb 9 23:57:35 ubuntu kernel: [17180451.416000] eth1: resetting device...
Feb 9 23:57:35 ubuntu kernel: [17180451.416000] eth1: uploading firmware...
Feb 9 23:57:35 ubuntu kernel: [17180451.496000] eth1: firmware version: 1.0.4.3
Feb 9 23:57:35 ubuntu kernel: [17180451.496000] eth1: firmware upload complete
Feb 9 23:57:36 ubuntu kernel: [17180452.496000] eth1: no 'reset complete' IRQ seen - retrying
Feb 9 23:57:37 ubuntu kernel: [17180453.496000] eth1: no 'reset complete' IRQ seen - retrying
Feb 9 23:57:37 ubuntu kernel: [17180453.496000] eth1: interface reset failure
Feb 9 23:57:37 ubuntu kernel: [17180453.496000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 9 23:57:38 ubuntu ubiquity[7047]: Step_before = stepReady
Feb 9 23:57:38 ubuntu ubiquity[7047]: progress_loop()
Feb 9 23:57:38 ubuntu gconfd (root-9257): starting (version 2.16.0), pid 9257 user 'root'
Feb 9 23:57:38 ubuntu gconfd (root-9257): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Feb 9 23:57:38 ubuntu gconfd (root-9257): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Feb 9 23:57:38 ubuntu gconfd (root-9257): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Feb 9 23:57:38 ubuntu gconfd (root-9257): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Feb 9 23:57:38 ubuntu gconfd (root-9257): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Feb 9 23:57:38 ubuntu gconfd (root-9257): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Feb 9 23:57:39 ubuntu ubiquity[7047]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman-commit']' for ubiquity.components.partman_commit.PartmanCommit
Feb 9 23:57:39 ubuntu ubiquity[7047]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Feb 9 23:57:39 ubuntu ubiquity: unsupported
Feb 9 23:57:39 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 9 23:57:39 ubuntu ubiquity: kernelmodules_ext3
Feb 9 23:57:39 ubuntu ubiquity: kernelmodules_jfs
Feb 9 23:57:39 ubuntu ubiquity: kernelmodules_reiserfs
Feb 9 23:57:39 ubuntu ubiquity: kernelmodules_xfs
Feb 9 23:57:39 ubuntu ubiquity: umount_target
Feb 9 23:57:39 ubuntu ubiquity: parted
Feb 9 23:57:39 ubuntu ubiquity: dump
Feb 9 23:57:39 ubuntu ubiquity: update_partitions
Feb 9 23:57:39 ubuntu ubiquity: filesystems_detected
Feb 9 23:57:39 ubuntu ubiquity: auto_mountpoints
Feb 9 23:57:39 ubuntu ubiquity: autouse_swap
Feb 9 23:57:39 ubuntu ubiquity: backup
Feb 10 00:57:41 ubuntu kernel: [17180459.032000] eth1: resetting device...
Feb 10 00:57:41 ubuntu kernel: [17180459.032000] eth1: uploading firmware...
Feb 10 00:57:41 ubuntu kernel: [17180459.112000] eth1: firmware version: 1.0.4.3
Feb 10 00:57:41 ubuntu kernel: [17180459.112000] eth1: firmware upload complete
Feb 10 00:57:41 ubuntu kernel: [17180459.600000] Adding 3285252k swap on /dev/sde5. Priority:-1 extents:1 across:3285252k
Feb 10 00:57:42 ubuntu kernel: [17180460.112000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 00:57:42 ubuntu ubiquity: swapon: /dev/sde5: Device or resource busy
Feb 10 00:57:42 ubuntu last message repeated 3 times
Feb 10 00:57:43 ubuntu kernel: [17180461.112000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 00:57:43 ubuntu kernel: [17180461.112000] eth1: interface reset failure
Feb 10 00:57:43 ubuntu kernel: [17180461.112000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 00:57:51 ubuntu ubiquity[7047]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman-commit'] exited with code 1
Feb 10 00:57:51 ubuntu ubiquity[7047]: debconffilter_done: PartmanCommit (current: None)
Feb 10 00:57:51 ubuntu ubiquity: debconf: DbDriver "targetdb": could not open /target/var/cache/debconf/config.dat
Feb 10 00:57:51 ubuntu ubiquity[7047]: log-output -t ubiquity debconf-copydb configdb targetdb -p ^console-setup/ --config=Name:targetdb --config=Driver:File --config=Filename:/target/var/cache/debconf/config.dat
Feb 10 00:57:57 ubuntu ubiquity[11008]: Ubiquity 1.2.5
Feb 10 00:57:58 ubuntu ubiquity[11008]: log-output -t ubiquity laptop-detect
Feb 10 00:57:59 ubuntu ubiquity[11008]: switched to page stepLanguage
Feb 10 00:58:00 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/localechooser/localechooser']' for ubiquity.components.language.Language
Feb 10 00:58:00 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^languagechooser/language-name, ^countrychooser/shortlist$
Feb 10 00:58:00 ubuntu localechooser: info: Locale has been preseeded to sv_SE.UTF-8
Feb 10 00:58:00 ubuntu localechooser: info: Set languagechooser/language-name = 'Swedish'
Feb 10 00:58:00 ubuntu localechooser: info: Set countrychooser/shortlist-sv = 'SE'
Feb 10 00:58:00 ubuntu localechooser: info: Set debian-installer/locale = 'sv_SE.UTF-8'
Feb 10 00:58:07 ubuntu gconfd (root-9257): GConf server is not in use, shutting down.
Feb 10 00:58:07 ubuntu gconfd (root-9257): Exiting
Feb 10 00:59:41 ubuntu kernel: [17180579.572000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 00:59:41 ubuntu kernel: [17180579.572000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 00:59:41 ubuntu kernel: [17180579.572000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 00:59:46 ubuntu kernel: [17180584.624000] eth1: resetting device...
Feb 10 00:59:46 ubuntu kernel: [17180584.624000] eth1: uploading firmware...
Feb 10 00:59:46 ubuntu kernel: [17180584.704000] eth1: firmware version: 1.0.4.3
Feb 10 00:59:46 ubuntu kernel: [17180584.704000] eth1: firmware upload complete
Feb 10 00:59:47 ubuntu kernel: [17180585.704000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 00:59:48 ubuntu kernel: [17180586.704000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 00:59:48 ubuntu kernel: [17180586.704000] eth1: interface reset failure
Feb 10 00:59:48 ubuntu kernel: [17180586.704000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:00:18 ubuntu localechooser: info: Set debconf/language = ''
Feb 10 01:00:18 ubuntu localechooser: info: Set countrychooser/country-name = 'Sweden'
Feb 10 01:00:18 ubuntu localechooser: info: Set debian-installer/country = 'SE'
Feb 10 01:00:18 ubuntu localechooser: info: Set debian-installer/locale = 'sv_SE.UTF-8'
Feb 10 01:00:18 ubuntu ubiquity[11008]: debconffilter_done: Language (current: Language)
Feb 10 01:00:18 ubuntu ubiquity[11008]: Step_before = stepLanguage
Feb 10 01:00:19 ubuntu ubiquity[11008]: switched to page stepLocation
Feb 10 01:00:19 ubuntu ubiquity[11008]: Step_after = stepLocation
Feb 10 01:00:19 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/tzsetup']' for ubiquity.components.timezone.Timezone
Feb 10 01:00:19 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^time/zone$
Feb 10 01:00:44 ubuntu ubiquity:
Feb 10 01:00:44 ubuntu ubiquity: (time-admin:11153): GnomeUI-WARNING **: While connecting to session manager:
Feb 10 01:00:44 ubuntu ubiquity: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.
Feb 10 01:00:44 ubuntu gconfd (root-11156): starting (version 2.16.0), pid 11156 user 'root'
Feb 10 01:00:44 ubuntu gconfd (root-11156): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Feb 10 01:00:44 ubuntu gconfd (root-11156): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Feb 10 01:00:44 ubuntu gconfd (root-11156): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Feb 10 01:00:44 ubuntu gconfd (root-11156): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Feb 10 01:00:44 ubuntu gconfd (root-11156): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Feb 10 01:00:45 ubuntu kernel: [17180643.872000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:00:45 ubuntu kernel: [17180643.872000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:00:45 ubuntu kernel: [17180643.872000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:00:50 ubuntu ubiquity: 11153: arguments to dbus_connection_send_with_reply_and_block() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 2873.
Feb 10 01:00:50 ubuntu ubiquity: This is normally a bug in some application using the D-Bus library.
Feb 10 00:00:50 ubuntu localechooser: info: Locale has been preseeded to sv_SE.UTF-8
Feb 10 00:00:50 ubuntu localechooser: info: Set languagechooser/language-name = 'Swedish'
Feb 10 00:00:50 ubuntu localechooser: info: Set countrychooser/shortlist-sv = 'SE'
Feb 10 00:00:50 ubuntu localechooser: info: Set debian-installer/locale = 'sv_SE.UTF-8'
Feb 10 00:00:50 ubuntu localechooser: info: Set debconf/language = ''
Feb 10 00:00:50 ubuntu localechooser: info: Set countrychooser/country-name = 'Sweden'
Feb 10 00:00:50 ubuntu localechooser: info: Set debian-installer/country = 'SE'
Feb 10 00:00:50 ubuntu localechooser: info: Set debian-installer/locale = 'sv_SE.UTF-8'
Feb 10 00:00:50 ubuntu ubiquity[11008]: debconffilter_done: Timezone (current: Timezone)
Feb 10 00:00:50 ubuntu ubiquity[11008]: Step_before = stepLocation
Feb 10 00:00:50 ubuntu ubiquity[11008]: switched to page stepKeyboardConf
Feb 10 00:00:50 ubuntu ubiquity[11008]: Step_after = stepKeyboardConf
Feb 10 00:00:50 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/console-setup/console-setup.postinst', 'configure']' for ubiquity.components.console_setup.ConsoleSetup
Feb 10 00:00:50 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^console-setup/layout, ^console-setup/variant
Feb 10 00:00:50 ubuntu ubiquity[11008]: ubiquity: Setting keyboard layout: pc105 se []
Feb 10 00:00:50 ubuntu ubiquity[11008]: log-output -t ubiquity setxkbmap -model pc105 -layout se
Feb 10 00:00:55 ubuntu ubiquity: Your console configuration will be updated the next time your system boots.
Feb 10 00:00:55 ubuntu ubiquity: If you want to update it now, run 'setupcon' from a virtual console.
Feb 10 00:00:55 ubuntu ubiquity[11008]: log-output -t ubiquity setxkbmap -model pc105 -layout se -option lv3:ralt_switch
Feb 10 00:00:55 ubuntu ubiquity[11008]: debconffilter_done: ConsoleSetup (current: ConsoleSetup)
Feb 10 00:00:55 ubuntu ubiquity[11008]: Step_before = stepKeyboardConf
Feb 10 00:00:55 ubuntu ubiquity[11008]: switched to page stepUserInfo
Feb 10 00:00:55 ubuntu ubiquity[11008]: Step_after = stepUserInfo
Feb 10 00:00:56 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/user-setup/user-setup-ask', '/target']' for ubiquity.components.usersetup.UserSetup
Feb 10 00:00:56 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^passwd/user-fullname$, ^passwd/username$, ^passwd/user-password$, ^passwd/user-password-again$, ERROR
Feb 10 00:01:13 ubuntu ubiquity[11008]: debconffilter_done: UserSetup (current: UserSetup)
Feb 10 00:01:13 ubuntu ubiquity[11008]: Step_before = stepUserInfo
Feb 10 00:01:13 ubuntu ubiquity[11008]: switched to page stepPartDisk
Feb 10 00:01:13 ubuntu ubiquity[11008]: Step_after = stepPartDisk
Feb 10 00:01:13 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.components.partman_auto.PartmanAuto
Feb 10 00:01:13 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^partman-auto/select_disk$, ^partman-auto/.*automatically_partition$, ^partman-partitioning/new_size$, ^partman/choose_partition$, ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Feb 10 00:01:13 ubuntu ubiquity: unsupported
Feb 10 00:01:13 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 10 00:01:13 ubuntu ubiquity: kernelmodules_ext3
Feb 10 00:01:13 ubuntu ubiquity: kernelmodules_jfs
Feb 10 00:01:13 ubuntu ubiquity: kernelmodules_reiserfs
Feb 10 00:01:13 ubuntu ubiquity: kernelmodules_xfs
Feb 10 00:01:13 ubuntu ubiquity: umount_target
Feb 10 00:01:13 ubuntu ubiquity: parted
Feb 10 00:01:14 ubuntu ubiquity: dump
Feb 10 00:01:15 ubuntu ubiquity: update_partitions
Feb 10 00:01:15 ubuntu ubiquity: filesystems_detected
Feb 10 00:01:15 ubuntu ubiquity: auto_mountpoints
Feb 10 00:01:15 ubuntu ubiquity: autouse_swap
Feb 10 00:01:15 ubuntu ubiquity: backup
Feb 10 00:01:15 ubuntu ubiquity[11008]: switched to page stepPartAuto
Feb 10 00:01:17 ubuntu gconfd (root-11156): GConf server is not in use, shutting down.
Feb 10 00:01:17 ubuntu gconfd (root-11156): Exiting
Feb 10 00:01:27 ubuntu ubiquity[11008]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman'] exited with code 10
Feb 10 00:01:27 ubuntu ubiquity[11008]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Feb 10 00:01:27 ubuntu ubiquity[11008]: Step_before = stepPartAuto
Feb 10 00:01:27 ubuntu ubiquity[11008]: gparted_loop()
Feb 10 00:01:27 ubuntu ubiquity[11008]: Disabling swap on /dev/sde5
Feb 10 00:01:27 ubuntu ubiquity[11008]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 37757872
Feb 10 00:01:27 ubuntu NetworkManager: <debug info>^I[1171065687.474322] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_part5_size_3364107264').
Feb 10 00:01:27 ubuntu NetworkManager: <debug info>^I[1171065687.521593] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:01:27 ubuntu ubiquity[11008]: switched to page stepPartAdvanced
Feb 10 00:01:27 ubuntu ubiquity[11008]: Step_after = stepPartAdvanced
Feb 10 00:02:06 ubuntu ubiquity[11008]: Step_before = stepPartAdvanced
Feb 10 00:02:09 ubuntu NetworkManager: <debug info>^I[1171065729.239273] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_6853_5BA9').
Feb 10 00:02:09 ubuntu NetworkManager: <debug info>^I[1171065729.243373] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:09 ubuntu NetworkManager: <debug info>^I[1171065729.378652] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:10 ubuntu NetworkManager: <debug info>^I[1171065730.264131] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:10 ubuntu NetworkManager: <debug info>^I[1171065730.791280] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:12 ubuntu NetworkManager: <debug info>^I[1171065732.989094] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_F755_036E').
Feb 10 00:02:13 ubuntu kernel: [17180734.180000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Feb 10 00:02:14 ubuntu NetworkManager: <debug info>^I[1171065734.248532] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:14 ubuntu NetworkManager: <debug info>^I[1171065734.349044] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:19 ubuntu NetworkManager: <debug info>^I[1171065739.671682] nm_hal_device_removed (): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:20 ubuntu NetworkManager: <debug info>^I[1171065740.630071] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_dfea4ff2_6ac0_4bad_8315_61636113f4a2').
Feb 10 00:02:20 ubuntu ubiquity[11008]: gparted replied: - FORMAT /dev/sde1 ext2
Feb 10 00:02:20 ubuntu ubiquity[11008]: gparted replied: 0 OK
Feb 10 00:02:21 ubuntu ubiquity[11008]: switched to page stepPartMountpoints
Feb 10 00:02:21 ubuntu ubiquity[11008]: Step_after = stepPartMountpoints
Feb 10 00:02:34 ubuntu ubiquity[11008]: Step_before = stepPartMountpoints
Feb 10 00:02:34 ubuntu ubiquity[11008]: mountpoints: {'/dev/sde1': ('/', True, 'ext2', []), '/dev/sde5': ('swap', True, None, None)}
Feb 10 00:02:35 ubuntu ubiquity[11008]: switched to page stepReady
Feb 10 00:02:35 ubuntu ubiquity[11008]: Step_after = stepReady
Feb 10 00:02:35 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
Feb 10 00:02:35 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Feb 10 00:02:35 ubuntu ubiquity: unsupported
Feb 10 00:02:35 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 10 00:02:35 ubuntu ubiquity: kernelmodules_ext3
Feb 10 00:02:35 ubuntu ubiquity: kernelmodules_jfs
Feb 10 00:02:35 ubuntu ubiquity: kernelmodules_reiserfs
Feb 10 00:02:35 ubuntu ubiquity: kernelmodules_xfs
Feb 10 00:02:35 ubuntu ubiquity: umount_target
Feb 10 00:02:35 ubuntu ubiquity: parted
Feb 10 00:02:36 ubuntu ubiquity: dump
Feb 10 00:02:36 ubuntu ubiquity: update_partitions
Feb 10 00:02:36 ubuntu ubiquity: filesystems_detected
Feb 10 00:02:36 ubuntu ubiquity: auto_mountpoints
Feb 10 00:02:36 ubuntu ubiquity: autouse_swap
Feb 10 00:02:36 ubuntu ubiquity: backup
Feb 10 00:02:36 ubuntu ubiquity[11008]: summary_device_button missing (broken ubiquity/summary/grub translation?)
Feb 10 00:02:36 ubuntu ubiquity[11008]: debconffilter_done: Summary (current: Summary)
Feb 10 00:02:47 ubuntu kernel: [17180768.212000] eth1: resetting device...
Feb 10 00:02:47 ubuntu kernel: [17180768.212000] eth1: uploading firmware...
Feb 10 00:02:47 ubuntu kernel: [17180768.292000] eth1: firmware version: 1.0.4.3
Feb 10 00:02:47 ubuntu kernel: [17180768.292000] eth1: firmware upload complete
Feb 10 00:02:48 ubuntu kernel: [17180769.292000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 00:02:49 ubuntu kernel: [17180770.292000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 00:02:49 ubuntu kernel: [17180770.292000] eth1: interface reset failure
Feb 10 00:02:49 ubuntu kernel: [17180770.292000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 00:02:50 ubuntu ubiquity[11008]: Step_before = stepReady
Feb 10 00:02:50 ubuntu ubiquity[11008]: progress_loop()
Feb 10 00:02:50 ubuntu gconfd (root-12265): starting (version 2.16.0), pid 12265 user 'root'
Feb 10 00:02:50 ubuntu gconfd (root-12265): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Feb 10 00:02:50 ubuntu gconfd (root-12265): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Feb 10 00:02:50 ubuntu gconfd (root-12265): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Feb 10 00:02:50 ubuntu gconfd (root-12265): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Feb 10 00:02:50 ubuntu gconfd (root-12265): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Feb 10 00:02:50 ubuntu gconfd (root-12265): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Feb 10 00:02:51 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman-commit']' for ubiquity.components.partman_commit.PartmanCommit
Feb 10 00:02:51 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Feb 10 00:02:51 ubuntu ubiquity: unsupported
Feb 10 00:02:51 ubuntu ubiquity: kernelmodules_basicfilesystems
Feb 10 00:02:51 ubuntu ubiquity: kernelmodules_ext3
Feb 10 00:02:51 ubuntu ubiquity: kernelmodules_jfs
Feb 10 00:02:51 ubuntu ubiquity: kernelmodules_reiserfs
Feb 10 00:02:51 ubuntu ubiquity: kernelmodules_xfs
Feb 10 00:02:51 ubuntu ubiquity: umount_target
Feb 10 00:02:51 ubuntu ubiquity: parted
Feb 10 00:02:51 ubuntu ubiquity: dump
Feb 10 00:02:51 ubuntu ubiquity: update_partitions
Feb 10 00:02:51 ubuntu ubiquity: filesystems_detected
Feb 10 00:02:51 ubuntu ubiquity: auto_mountpoints
Feb 10 00:02:51 ubuntu ubiquity: autouse_swap
Feb 10 00:02:51 ubuntu ubiquity: backup
Feb 10 01:02:58 ubuntu kernel: [17180776.804000] Adding 3285252k swap on /dev/sde5. Priority:-2 extents:1 across:3285252k
Feb 10 01:02:59 ubuntu kernel: [17180777.832000] eth1: resetting device...
Feb 10 01:02:59 ubuntu kernel: [17180777.832000] eth1: uploading firmware...
Feb 10 01:03:00 ubuntu kernel: [17180777.912000] eth1: firmware version: 1.0.4.3
Feb 10 01:03:00 ubuntu kernel: [17180777.912000] eth1: firmware upload complete
Feb 10 01:03:01 ubuntu kernel: [17180778.912000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:03:02 ubuntu kernel: [17180779.912000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:03:02 ubuntu kernel: [17180779.912000] eth1: interface reset failure
Feb 10 01:03:02 ubuntu kernel: [17180779.912000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:03:23 ubuntu gconfd (root-12265): GConf server is not in use, shutting down.
Feb 10 01:03:23 ubuntu gconfd (root-12265): Exiting
Feb 10 01:04:21 ubuntu kernel: [17180859.032000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:04:21 ubuntu kernel: [17180859.032000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:04:21 ubuntu kernel: [17180859.032000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:04:34 ubuntu ubiquity: swapon: /dev/sde5: Device or resource busy
Feb 10 01:04:35 ubuntu last message repeated 3 times
Feb 10 01:04:36 ubuntu ubiquity: ln:
Feb 10 01:04:36 ubuntu ubiquity: creating symbolic link `/target/media/cdrom' to `cdrom0'
Feb 10 01:04:36 ubuntu ubiquity: : Operation not permitted
Feb 10 01:04:36 ubuntu ubiquity:
Feb 10 01:04:36 ubuntu ubiquity: ln: creating symbolic link `/target/cdrom' to `media/cdrom'
Feb 10 01:04:36 ubuntu ubiquity: : Operation not permitted
Feb 10 01:04:36 ubuntu partman-target: USB automounting disabled (would have handled: /dev/sde1 /dev/sde5)
Feb 10 01:04:36 ubuntu ubiquity[11008]: debconffilter_done: PartmanCommit (current: None)
Feb 10 01:04:37 ubuntu ubiquity[11008]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/install.py']' for ubiquity.components.install.Install
Feb 10 01:04:37 ubuntu ubiquity[11008]: ubiquity: Watching for question patterns ^.*/apt-install-failed$, grub-installer/install_to_xfs, CAPB, ERROR, PROGRESS
Feb 10 01:04:37 ubuntu ubiquity: /usr/lib/python2.4/site-packages/apt/__init__.py:17: FutureWarning: apt API not stable yet
Feb 10 01:04:37 ubuntu ubiquity: warnings.warn("apt API not stable yet", FutureWarning)
Feb 10 01:04:41 ubuntu kernel: [17180879.808000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:04:41 ubuntu kernel: [17180879.808000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:04:41 ubuntu kernel: [17180879.808000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:04:50 ubuntu python: Exception during installation:
Feb 10 01:04:50 ubuntu python: Traceback (most recent call last):
Feb 10 01:04:50 ubuntu python: File "/usr/share/ubiquity/install.py", line 1404, in ?
Feb 10 01:04:50 ubuntu python: install.run()
Feb 10 01:04:50 ubuntu python: File "/usr/share/ubiquity/install.py", line 306, in run
Feb 10 01:04:50 ubuntu python: self.copy_all()
Feb 10 01:04:50 ubuntu python: File "/usr/share/ubiquity/install.py", line 470, in copy_all
Feb 10 01:04:50 ubuntu python: os.symlink(linkto, targetpath)
Feb 10 01:04:50 ubuntu python: OSError: [Errno 1] Operation not permitted
Feb 10 01:04:50 ubuntu python:
Feb 10 01:04:50 ubuntu ubiquity[11008]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/install.py'] exited with code 1
Feb 10 01:04:51 ubuntu ubiquity[11008]: debconffilter_done: Install (current: None)
Feb 10 01:04:51 ubuntu ubiquity[11008]: Exception in GTK frontend (invoking crash handler):
Feb 10 01:04:51 ubuntu ubiquity[11008]: Traceback (most recent call last):
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/bin/ubiquity", line 166, in ?
Feb 10 01:04:51 ubuntu ubiquity[11008]: main()
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/bin/ubiquity", line 161, in main
Feb 10 01:04:51 ubuntu ubiquity[11008]: install(sys.argv[1])
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/bin/ubiquity", line 57, in install
Feb 10 01:04:51 ubuntu ubiquity[11008]: ret = wizard.run()
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
Feb 10 01:04:51 ubuntu ubiquity[11008]: self.process_step()
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
Feb 10 01:04:51 ubuntu ubiquity[11008]: self.progress_loop()
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 628, in progress_loop
Feb 10 01:04:51 ubuntu ubiquity[11008]: raise RuntimeError, ("Install failed with exit code %s\n%s" %
Feb 10 01:04:51 ubuntu ubiquity[11008]: RuntimeError: Install failed with exit code 1
Feb 10 01:04:51 ubuntu ubiquity[11008]: Traceback (most recent call last):
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/share/ubiquity/install.py", line 1404, in ?
Feb 10 01:04:51 ubuntu ubiquity[11008]: install.run()
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/share/ubiquity/install.py", line 306, in run
Feb 10 01:04:51 ubuntu ubiquity[11008]: self.copy_all()
Feb 10 01:04:51 ubuntu ubiquity[11008]: File "/usr/share/ubiquity/install.py", line 470, in copy_all
Feb 10 01:04:51 ubuntu ubiquity[11008]: os.symlink(linkto, targetpath)
Feb 10 01:04:51 ubuntu ubiquity[11008]: OSError: [Errno 1] Operation not permitted
Feb 10 01:04:51 ubuntu ubiquity[11008]:
Feb 10 01:04:51 ubuntu last message repeated 2 times
Feb 10 01:05:05 ubuntu kernel: [17180903.420000] eth1: resetting device...
Feb 10 01:05:05 ubuntu kernel: [17180903.420000] eth1: uploading firmware...
Feb 10 01:05:05 ubuntu kernel: [17180903.504000] eth1: firmware version: 1.0.4.3
Feb 10 01:05:05 ubuntu kernel: [17180903.504000] eth1: firmware upload complete
Feb 10 01:05:06 ubuntu kernel: [17180904.504000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:05:07 ubuntu kernel: [17180905.504000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:05:07 ubuntu kernel: [17180905.504000] eth1: interface reset failure
Feb 10 01:05:07 ubuntu kernel: [17180905.504000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:06:16 ubuntu kernel: [17180974.776000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:06:16 ubuntu kernel: [17180974.776000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:06:16 ubuntu kernel: [17180974.776000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:07:12 ubuntu kernel: [17181030.620000] eth1: resetting device...
Feb 10 01:07:12 ubuntu kernel: [17181030.620000] eth1: uploading firmware...
Feb 10 01:07:12 ubuntu kernel: [17181030.700000] eth1: firmware version: 1.0.4.3
Feb 10 01:07:12 ubuntu kernel: [17181030.700000] eth1: firmware upload complete
Feb 10 01:07:13 ubuntu kernel: [17181031.700000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:07:14 ubuntu kernel: [17181032.700000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:07:14 ubuntu kernel: [17181032.700000] eth1: interface reset failure
Feb 10 01:07:14 ubuntu kernel: [17181032.700000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:08:30 ubuntu kernel: [17181108.844000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:08:30 ubuntu kernel: [17181108.844000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:08:30 ubuntu kernel: [17181108.844000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:09:18 ubuntu kernel: [17181156.212000] eth1: resetting device...
Feb 10 01:09:18 ubuntu kernel: [17181156.212000] eth1: uploading firmware...
Feb 10 01:09:18 ubuntu kernel: [17181156.292000] eth1: firmware version: 1.0.4.3
Feb 10 01:09:18 ubuntu kernel: [17181156.292000] eth1: firmware upload complete
Feb 10 01:09:19 ubuntu kernel: [17181157.292000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:09:20 ubuntu kernel: [17181158.292000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:09:20 ubuntu kernel: [17181158.292000] eth1: interface reset failure
Feb 10 01:09:20 ubuntu kernel: [17181158.292000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:11:23 ubuntu kernel: [17181281.796000] eth1: resetting device...
Feb 10 01:11:23 ubuntu kernel: [17181281.796000] eth1: uploading firmware...
Feb 10 01:11:24 ubuntu kernel: [17181281.880000] eth1: firmware version: 1.0.4.3
Feb 10 01:11:24 ubuntu kernel: [17181281.880000] eth1: firmware upload complete
Feb 10 01:11:25 ubuntu kernel: [17181282.880000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:11:26 ubuntu kernel: [17181283.880000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:11:26 ubuntu kernel: [17181283.880000] eth1: interface reset failure
Feb 10 01:11:26 ubuntu kernel: [17181283.880000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:12:06 ubuntu kernel: [17181324.472000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:12:06 ubuntu kernel: [17181324.472000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:12:06 ubuntu kernel: [17181324.472000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:13:31 ubuntu kernel: [17181408.996000] eth1: resetting device...
Feb 10 01:13:31 ubuntu kernel: [17181408.996000] eth1: uploading firmware...
Feb 10 01:13:31 ubuntu kernel: [17181409.076000] eth1: firmware version: 1.0.4.3
Feb 10 01:13:31 ubuntu kernel: [17181409.076000] eth1: firmware upload complete
Feb 10 01:13:32 ubuntu kernel: [17181410.076000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:13:33 ubuntu kernel: [17181411.076000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:13:33 ubuntu kernel: [17181411.076000] eth1: interface reset failure
Feb 10 01:13:33 ubuntu kernel: [17181411.076000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
Feb 10 01:15:06 ubuntu kernel: [17181504.020000] ACPI Error (psargs-0355): [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND
Feb 10 01:15:06 ubuntu kernel: [17181504.020000] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L1C] (Node dfff739c), AE_NOT_FOUND
Feb 10 01:15:06 ubuntu kernel: [17181504.020000] ACPI Exception (evgpe-0576): AE_NOT_FOUND, While evaluating GPE method [_L1C] [20060707]
Feb 10 01:15:36 ubuntu kernel: [17181534.592000] eth1: resetting device...
Feb 10 01:15:36 ubuntu kernel: [17181534.592000] eth1: uploading firmware...
Feb 10 01:15:36 ubuntu kernel: [17181534.676000] eth1: firmware version: 1.0.4.3
Feb 10 01:15:36 ubuntu kernel: [17181534.676000] eth1: firmware upload complete
Feb 10 01:15:37 ubuntu kernel: [17181535.680000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:15:38 ubuntu kernel: [17181536.684000] eth1: no 'reset complete' IRQ seen - retrying
Feb 10 01:15:38 ubuntu kernel: [17181536.684000] eth1: interface reset failure
Feb 10 01:15:38 ubuntu kernel: [17181536.684000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
ubuntu@ubuntu:~$

***************************************************************************
*******************************************************************************

/var/log/partman:
parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 61
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_ext3: *******************************************************
/lib/partman/finish.d/09nomountpoint_ext3: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 62
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_jfs: *******************************************************
/lib/partman/finish.d/09nomountpoint_jfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 63
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_reiserfs: *******************************************************
/lib/partman/finish.d/09nomountpoint_reiserfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 64
parted_server: Opening infifo
/lib/partman/finish.d/09nomountpoint_xfs: *******************************************************
/lib/partman/finish.d/09nomountpoint_xfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 65
parted_server: Opening infifo
/lib/partman/finish.d/10check_basicfilesystems: *******************************************************
/lib/partman/finish.d/10check_basicfilesystems: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 66
parted_server: Opening infifo
/lib/partman/finish.d/10check_swap: *******************************************************
/lib/partman/finish.d/10check_swap: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 67
parted_server: Opening infifo
/lib/partman/finish.d/20mount_partitions: *******************************************************
/lib/partman/fstab.d/basic: *******************************************************
/lib/partman/fstab.d/basic: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 68
parted_server: Opening infifo
/lib/partman/fstab.d/ext3: *******************************************************
/lib/partman/fstab.d/ext3: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 69
parted_server: Opening infifo
/lib/partman/fstab.d/jfs: *******************************************************
/lib/partman/fstab.d/jfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 70
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: *******************************************************
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 71
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 72
parted_server: Opening infifo
/lib/partman/fstab.d/xfs: *******************************************************
/lib/partman/fstab.d/xfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 73
parted_server: Opening infifo
/lib/partman/fstab.d/basic: *******************************************************
/lib/partman/fstab.d/basic: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 74
parted_server: Opening infifo
/lib/partman/fstab.d/ext3: *******************************************************
/lib/partman/fstab.d/ext3: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 75
parted_server: Opening infifo
/lib/partman/fstab.d/jfs: *******************************************************
/lib/partman/fstab.d/jfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK

parted_server: OUT: 1 32256-76659609599 76659577344 primary ext2 /dev/sde1

parted_server: OUT: 5 76659641856-80023749119 3364107264 logical linux-swap /dev/sde5

parted_server: Partitions printed
parted_server: OUT:

parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 76
parted_server: Opening infifo
/lib/partman/fstab.d/reiserfs: *******************************************************
/lib/partman/fstab.d/reiserfs: IN: PARTITIONS =dev=sde
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OU

See original description
Revision history for this message
Parthan SR (parth-technofreak) wrote :

Thank you for filing this bug and helping to make Ubuntu better. Can you reproduce this bug for Ubuntu Hardy 8.04?

Changed in ubiquity:
status: New → Incomplete
Revision history for this message
mooy (robin-haggqvist) wrote : Re: [Bug 84303] Re: installer crashed

Probably not. Im running U 7,10 nordic with no issues. Sorry.

/Robin

On 3/25/08, Parthan <email address hidden> wrote:
>
> Thank you for filing this bug and helping to make Ubuntu better. Can you
> reproduce this bug for Ubuntu Hardy 8.04?
>
> ** Changed in: ubiquity (Ubuntu)
> Status: New => Incomplete
>
> --
> installer crashed
> https://bugs.launchpad.net/bugs/84303
> You received this bug notification because you are a direct subscriber
> of the bug.
>

--
/Robin Häggqvist

Robin recommends:
http://openoffice.org * http://gimp.org * http://avast.com *
http://gmail.com * http://cdburnerxp.se * http://7-zip.org *
http://realvnc.com/

Revision history for this message
Parthan SR (parth-technofreak) wrote :

As the bug has been reported to be not reproducible for 7.10 and hence might not be present in 8.04 as well. Please feel free to reopen this bug by marking the status as new, if you can reproduce the bug for hardy 8.04.

Changed in ubiquity:
status: Incomplete → Invalid
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.