Installer crashed "No space left on device"
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
ubiquity (Ubuntu) |
Confirmed
|
Medium
|
Unassigned |
Bug Description
-------
Traceback report
-------
Traceback (most recent call last):
File "/usr/bin/
main()
File "/usr/bin/
install(
File "/usr/bin/
ret = wizard.run()
File "/usr/lib/
self.
File "/usr/lib/
self.
File "/usr/lib/
raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
File "/usr/share/
install.run()
File "/usr/share/
self.copy_all()
File "/usr/share/
shutil.
File "shutil.py", line 49, in copyfile
copyfileobj
File "shutil.py", line 25, in copyfileobj
fdst.write(buf)
IOError: [Errno 28] No space left on device
-------
syslog
-------
Oct 28 14:53:39 ubuntu syslogd 1.4.1#18ubuntu6: restart.
Oct 28 14:53:40 ubuntu kernel: Inspecting /boot/System.
Oct 28 14:53:42 ubuntu kernel: Loaded 22825 symbols from /boot/System.
Oct 28 14:53:42 ubuntu kernel: Symbols match kernel version 2.6.17.
Oct 28 14:53:42 ubuntu kernel: No module symbols loaded - kernel modules not enabled.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-provided physical RAM map:
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-e820: 0000000000100000 - 000000000ffdb000 (usable)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-e820: 000000000ffdb000 - 0000000010000000 (reserved)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] 0MB HIGHMEM available.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] 255MB LOWMEM available.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] On node 0 totalpages: 65499
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] DMA zone: 4096 pages, LIFO batch:0
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Normal zone: 61403 pages, LIFO batch:15
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] DMI 2.3 present.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] ACPI: RSDP (v000 DELL ) @ 0x000f40b0
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] ACPI: RSDT (v001 DELL CPi R 0x27d30305 ASL 0x00000061) @ 0x0fff0000
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] ACPI: FADT (v001 DELL CPi R 0x27d30305 ASL 0x00000061) @ 0x0fff0400
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000d) @ 0x00000000
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x808
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10100000:efd00000)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Built 1 zonelists
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Kernel command line: BOOT_IMAGE=
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] mapped APIC to ffffd000 (0120a000)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Enabling fast FPU save and restore... done.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Initializing CPU#0
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Detected 597.518 MHz processor.
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Using pmtmr for high-res timesource
Oct 28 14:53:42 ubuntu kernel: [17179569.184000] Console: colour VGA+ 80x25
Oct 28 14:53:42 ubuntu kernel: [17179570.204000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179570.204000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179570.236000] Memory: 249832k/261996k available (1910k kernel code, 11600k reserved, 1070k data, 308k init, 0k highmem)
Oct 28 14:53:42 ubuntu kernel: [17179570.236000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] Calibrating delay using timer specific routine.. 1196.12 BogoMIPS (lpj=2392246)
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] Security Framework v1.0.0 initialized
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] SELinux: Disabled at boot.
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] Mount-cache hash table entries: 512
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] CPU: L2 cache: 128K
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Oct 28 14:53:42 ubuntu kernel: [17179570.316000] Checking 'hlt' instruction... OK.
Oct 28 14:53:42 ubuntu kernel: [17179570.332000] SMP alternatives: switching to UP code
Oct 28 14:53:42 ubuntu kernel: [17179570.332000] Freeing SMP alternatives: 16k freed
Oct 28 14:53:42 ubuntu kernel: [17179570.332000] checking if image is initramfs... it is
Oct 28 14:53:42 ubuntu kernel: [17179571.996000] Freeing initrd memory: 5564k freed
Oct 28 14:53:42 ubuntu kernel: [17179571.996000] ACPI: Core revision 20060707
Oct 28 14:53:42 ubuntu kernel: [17179572.000000] ACPI: Looking for DSDT ... not found!
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] ACPI: setting ELCR to 0200 (from 0820)
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] CPU0: Intel Celeron (Coppermine) stepping 03
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] SMP motherboard not detected.
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] Local APIC not detected. Using dummy APIC emulation.
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] Brought up 1 CPUs
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] migration_cost=0
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] NET: Registered protocol family 16
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] EISA bus registered
Oct 28 14:53:42 ubuntu kernel: [17179572.004000] ACPI: bus type pci registered
Oct 28 14:53:42 ubuntu kernel: [17179572.008000] PCI: PCI BIOS revision 2.10 entry at 0xfc0ae, last bus=1
Oct 28 14:53:42 ubuntu kernel: [17179572.008000] PCI: Using configuration type 1
Oct 28 14:53:42 ubuntu kernel: [17179572.008000] Setting up standard PCI resources
Oct 28 14:53:42 ubuntu kernel: [17179572.040000] ACPI: Interpreter enabled
Oct 28 14:53:42 ubuntu kernel: [17179572.040000] ACPI: Using PIC for interrupt routing
Oct 28 14:53:42 ubuntu kernel: [17179572.048000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 28 14:53:42 ubuntu kernel: [17179572.048000] PCI: Probing PCI hardware (bus 00)
Oct 28 14:53:42 ubuntu kernel: [17179572.048000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] PCI quirk: region 0800-083f claimed by PIIX4 ACPI
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] PCI quirk: region 0840-084f claimed by PIIX4 SMB
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] PIIX4 devres B PIO at 00e0-00e7
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] PIIX4 devres C PIO at 0850-085f
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] Boot video device is 0000:01:00.0
Oct 28 14:53:42 ubuntu kernel: [17179572.084000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 28 14:53:42 ubuntu kernel: [17179572.220000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Oct 28 14:53:42 ubuntu kernel: [17179572.220000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Oct 28 14:53:42 ubuntu kernel: [17179572.220000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 28 14:53:42 ubuntu kernel: [17179572.224000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Oct 28 14:53:42 ubuntu kernel: [17179572.224000] ACPI: PCI Interrupt Routing Table [\_SB_.
Oct 28 14:53:42 ubuntu kernel: [17179572.228000] ACPI: Power Resource [PADA] (on)
Oct 28 14:53:42 ubuntu kernel: [17179572.228000] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 28 14:53:42 ubuntu kernel: [17179572.228000] pnp: PnP ACPI init
Oct 28 14:53:42 ubuntu kernel: [17179572.340000] pnp: PnP ACPI: found 15 devices
Oct 28 14:53:42 ubuntu kernel: [17179572.340000] PnPBIOS: Disabled by ACPI PNP
Oct 28 14:53:42 ubuntu kernel: [17179572.340000] PCI: Using ACPI for IRQ routing
Oct 28 14:53:42 ubuntu kernel: [17179572.340000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:02: ioport range 0x800-0x805 could not be reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:02: ioport range 0x808-0x80f could not be reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x806-0x807 has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x850-0x853 has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x856-0x85f has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x810-0x83f has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x840-0x84f has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x600-0x67f has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:03: ioport range 0x680-0x6ff has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PCI: Bridge: 0000:00:01.0
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] IO window: e000-efff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] MEM window: fc000000-feffffff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PREFETCH window: 28000000-280fffff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PCI: Bus 2, cardbus bridge: 0000:00:03.0
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] IO window: 00001000-000010ff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] IO window: 00001400-000014ff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PREFETCH window: 20000000-21ffffff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] MEM window: 22000000-23ffffff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PCI: Bus 6, cardbus bridge: 0000:00:03.1
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] IO window: 00001800-000018ff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] IO window: 00001c00-00001cff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PREFETCH window: 24000000-25ffffff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] MEM window: 26000000-27ffffff
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PCI: setting IRQ 11 as level-triggered
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 14:53:42 ubuntu kernel: [17179572.360000] NET: Registered protocol family 2
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] TCP: Hash tables configured (established 8192 bind 4096)
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] TCP reno registered
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] audit: initializing netlink socket (disabled)
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] audit(116204694
Oct 28 14:53:42 ubuntu kernel: [17179572.400000] VFS: Disk quotas dquot_6.5.1
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] Initializing Cryptographic API
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] io scheduler noop registered
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] io scheduler anticipatory registered
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] io scheduler deadline registered
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] io scheduler cfq registered (default)
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] Limiting direct PCI/PCI transfers.
Oct 28 14:53:42 ubuntu kernel: [17179572.404000] isapnp: Scanning for PnP cards...
Oct 28 14:53:42 ubuntu kernel: [17179572.756000] isapnp: No Plug & Play device found
Oct 28 14:53:42 ubuntu kernel: [17179572.896000] Real Time Clock Driver v1.12ac
Oct 28 14:53:42 ubuntu kernel: [17179572.896000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 28 14:53:42 ubuntu kernel: [17179572.896000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 28 14:53:42 ubuntu kernel: [17179572.900000] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 28 14:53:42 ubuntu kernel: [17179572.900000] mice: PS/2 mouse device common for all mice
Oct 28 14:53:42 ubuntu kernel: [17179572.904000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
Oct 28 14:53:42 ubuntu kernel: [17179572.904000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 28 14:53:42 ubuntu kernel: [17179572.904000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 28 14:53:42 ubuntu kernel: [17179572.904000] PNP: PS/2 Controller [PNP0303:
Oct 28 14:53:42 ubuntu kernel: [17179572.912000] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 28 14:53:42 ubuntu kernel: [17179572.912000] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] EISA: Probing bus 0 at eisa.0
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] Cannot allocate resource for EISA slot 1
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] EISA: Detected 0 cards.
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] TCP bic registered
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] NET: Registered protocol family 1
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] NET: Registered protocol family 8
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] NET: Registered protocol family 20
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] Using IPI No-Shortcut mode
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] ACPI: (supports S0 S1 S3 S4 S5)
Oct 28 14:53:42 ubuntu kernel: [17179572.916000] Freeing unused kernel memory: 308k freed
Oct 28 14:53:42 ubuntu kernel: [17179572.952000] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 28 14:53:42 ubuntu kernel: [17179574.652000] Capability LSM initialized
Oct 28 14:53:42 ubuntu kernel: [17179575.084000] ACPI: CPU0 (power states: C1[C1] C2[C2])
Oct 28 14:53:42 ubuntu kernel: [17179575.104000] ACPI: Thermal Zone [THM] (41 C)
Oct 28 14:53:42 ubuntu kernel: [17179577.120000] PIIX4: IDE controller at PCI slot 0000:00:07.1
Oct 28 14:53:42 ubuntu kernel: [17179577.120000] PIIX4: chipset revision 1
Oct 28 14:53:42 ubuntu kernel: [17179577.120000] PIIX4: not 100%% native mode: will probe irqs later
Oct 28 14:53:42 ubuntu kernel: [17179577.120000] ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
Oct 28 14:53:42 ubuntu kernel: [17179577.120000] ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio
Oct 28 14:53:42 ubuntu kernel: [17179577.120000] Probing IDE interface ide0...
Oct 28 14:53:42 ubuntu kernel: [17179577.412000] hda: IC25N040ATCS05-0, ATA DISK drive
Oct 28 14:53:42 ubuntu kernel: [17179578.084000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 28 14:53:42 ubuntu kernel: [17179578.336000] Probing IDE interface ide1...
Oct 28 14:53:42 ubuntu kernel: [17179579.072000] hdc: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
Oct 28 14:53:42 ubuntu kernel: [17179579.796000] ide1 at 0x170-0x177,0x376 on irq 15
Oct 28 14:53:42 ubuntu kernel: [17179579.832000] hda: max request size: 128KiB
Oct 28 14:53:42 ubuntu kernel: [17179579.864000] hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(33)
Oct 28 14:53:42 ubuntu kernel: [17179579.864000] hda: cache flushes not supported
Oct 28 14:53:42 ubuntu kernel: [17179579.864000] hda: hda1 hda2 < hda5 >
Oct 28 14:53:42 ubuntu kernel: [17179580.032000] hdc: ATAPI 24X DVD-ROM drive, 192kB Cache, UDMA(33)
Oct 28 14:53:42 ubuntu kernel: [17179580.032000] Uniform CD-ROM driver Revision: 3.20
Oct 28 14:53:42 ubuntu kernel: [17179581.500000] usbcore: registered new driver usbfs
Oct 28 14:53:42 ubuntu kernel: [17179581.500000] usbcore: registered new driver hub
Oct 28 14:53:42 ubuntu kernel: [17179581.508000] USB Universal Host Controller Interface driver v3.0
Oct 28 14:53:42 ubuntu kernel: [17179581.508000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 14:53:42 ubuntu kernel: [17179581.508000] uhci_hcd 0000:00:07.2: UHCI Host Controller
Oct 28 14:53:42 ubuntu kernel: [17179581.508000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Oct 28 14:53:42 ubuntu kernel: [17179581.508000] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
Oct 28 14:53:42 ubuntu kernel: [17179581.508000] usb usb1: configuration #1 chosen from 1 choice
Oct 28 14:53:42 ubuntu kernel: [17179581.512000] hub 1-0:1.0: USB hub found
Oct 28 14:53:42 ubuntu kernel: [17179581.512000] hub 1-0:1.0: 2 ports detected
Oct 28 14:53:42 ubuntu kernel: [17179581.856000] usb 1-1: new low speed USB device using uhci_hcd and address 2
Oct 28 14:53:42 ubuntu kernel: [17179582.036000] usb 1-1: configuration #1 chosen from 1 choice
Oct 28 14:53:42 ubuntu kernel: [17179582.072000] usbcore: registered new driver hiddev
Oct 28 14:53:42 ubuntu kernel: [17179582.092000] input: Microsoft Microsoft IntelliMouse® Optical as /class/input/input1
Oct 28 14:53:42 ubuntu kernel: [17179582.092000] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:07.2-1
Oct 28 14:53:42 ubuntu kernel: [17179582.092000] usbcore: registered new driver usbhid
Oct 28 14:53:42 ubuntu kernel: [17179582.092000] drivers/
Oct 28 14:53:42 ubuntu kernel: [17179583.616000] ISO 9660 Extensions: Microsoft Joliet Level 3
Oct 28 14:53:42 ubuntu kernel: [17179583.700000] ISO 9660 Extensions: RRIP_1991A
Oct 28 14:53:42 ubuntu kernel: [17179583.780000] Registering unionfs 1.1.4
Oct 28 14:53:42 ubuntu kernel: [17179583.816000] loop: loaded (max 8 devices)
Oct 28 14:53:42 ubuntu kernel: [17179584.048000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Oct 28 14:53:42 ubuntu kernel: [17179802.168000] Linux agpgart interface v0.101 (c) Dave Jones
Oct 28 14:53:42 ubuntu kernel: [17179804.672000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 28 14:53:42 ubuntu kernel: [17179805.552000] agpgart: Detected an Intel 440BX Chipset.
Oct 28 14:53:42 ubuntu kernel: [17179805.556000] agpgart: AGP aperture is 64M @ 0xf4000000
Oct 28 14:53:42 ubuntu kernel: [17179805.644000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Oct 28 14:53:42 ubuntu kernel: [17179805.868000] Floppy drive(s): fd0 is 1.44M
Oct 28 14:53:42 ubuntu kernel: [17179805.884000] FDC 0 is a post-1991 82077
Oct 28 14:53:42 ubuntu kernel: [17179808.620000] parport: PnPBIOS parport detected.
Oct 28 14:53:42 ubuntu kernel: [17179808.620000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
Oct 28 14:53:42 ubuntu kernel: [17179808.904000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 14:53:42 ubuntu kernel: [17179808.904000] Yenta: CardBus bridge found at 0000:00:03.0 [1028:00bc]
Oct 28 14:53:42 ubuntu kernel: [17179808.904000] Yenta: Using CSCINT to route CSC interrupts to PCI
Oct 28 14:53:42 ubuntu kernel: [17179808.904000] Yenta: Routing CardBus interrupts to PCI
Oct 28 14:53:42 ubuntu kernel: [17179808.904000] Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] Socket status: 30000010
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] Yenta: CardBus bridge found at 0000:00:03.1 [1028:00bc]
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] Yenta: Using CSCINT to route CSC interrupts to PCI
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] Yenta: Routing CardBus interrupts to PCI
Oct 28 14:53:42 ubuntu kernel: [17179809.136000] Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66
Oct 28 14:53:42 ubuntu kernel: [17179809.368000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
Oct 28 14:53:42 ubuntu kernel: [17179809.368000] Socket status: 30000006
Oct 28 14:53:42 ubuntu kernel: [17179809.576000] Synaptics Touchpad, model: 1, fw: 4.2, id: 0x844a1, caps: 0x0/0x0
Oct 28 14:53:42 ubuntu kernel: [17179809.628000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
Oct 28 14:53:42 ubuntu kernel: [17179809.672000] input: PC Speaker as /class/input/input3
Oct 28 14:53:42 ubuntu kernel: [17179809.780000] pccard: PCMCIA card inserted into slot 0
Oct 28 14:53:42 ubuntu kernel: [17179810.644000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Oct 28 14:53:42 ubuntu kernel: [17179810.644000] PCI: setting IRQ 5 as level-triggered
Oct 28 14:53:42 ubuntu kernel: [17179810.644000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Oct 28 14:53:42 ubuntu kernel: [17179810.908000] ts: Compaq touchscreen protocol output
Oct 28 14:53:42 ubuntu kernel: [17179812.436000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
Oct 28 14:53:42 ubuntu kernel: [17179812.436000] cs: IO port probe 0x3e0-0x4ff: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.436000] cs: IO port probe 0x820-0x8ff: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.436000] cs: IO port probe 0xc00-0xcf7: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.436000] cs: IO port probe 0xa00-0xaff: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.440000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
Oct 28 14:53:42 ubuntu kernel: [17179812.440000] cs: IO port probe 0x3e0-0x4ff: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.440000] cs: IO port probe 0x820-0x8ff: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.440000] cs: IO port probe 0xc00-0xcf7: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.440000] cs: IO port probe 0xa00-0xaff: clean.
Oct 28 14:53:42 ubuntu kernel: [17179812.444000] cs: memory probe 0xa0000000-
Oct 28 14:53:42 ubuntu kernel: [17179812.448000] pcmcia: registering new device pcmcia0.0
Oct 28 14:53:42 ubuntu kernel: [17179815.108000] ASIC rev 1,<6>eth0: Megahertz 574B at io 0x300, irq 3, hw_addr 00:50:04:FE:6F:1A.
Oct 28 14:53:42 ubuntu kernel: [17179815.116000] 64K FIFO split 1:1 Rx:Tx, autoselect MII interface.
Oct 28 14:53:42 ubuntu kernel: [17179817.368000] eth0: remote fault detected
Oct 28 14:53:42 ubuntu kernel: [17179817.560000] NET: Registered protocol family 17
Oct 28 14:53:42 ubuntu kernel: [17179818.368000] eth0: found link beat
Oct 28 14:53:42 ubuntu kernel: [17179818.368000] eth0: autonegotiation complete: 100baseT-FD selected
Oct 28 14:53:42 ubuntu kernel: [17179823.772000] NET: Registered protocol family 10
Oct 28 14:53:42 ubuntu kernel: [17179823.772000] lo: Disabled Privacy Extensions
Oct 28 14:53:42 ubuntu kernel: [17179823.772000] IPv6 over IPv4 tunneling driver
Oct 28 14:53:42 ubuntu kernel: [17179833.784000] eth0: no IPv6 routers present
Oct 28 14:53:42 ubuntu kernel: [17179837.484000] ACPI: AC Adapter [AC] (on-line)
Oct 28 14:53:42 ubuntu kernel: [17179837.680000] ACPI: Battery Slot [BAT0] (battery present)
Oct 28 14:53:42 ubuntu kernel: [17179837.680000] ACPI: Battery Slot [BAT1] (battery absent)
Oct 28 14:53:42 ubuntu kernel: [17179837.828000] ACPI: Lid Switch [LID]
Oct 28 14:53:42 ubuntu kernel: [17179837.828000] ACPI: Power Button (CM) [PBTN]
Oct 28 14:53:42 ubuntu kernel: [17179837.828000] ACPI: Sleep Button (CM) [SBTN]
Oct 28 14:53:42 ubuntu kernel: [17179838.044000] ACPI: ACPI Dock Station Driver
Oct 28 14:53:42 ubuntu kernel: [17179838.284000] ibm_acpi: ec object not found
Oct 28 14:53:42 ubuntu kernel: [17179838.440000] pcc_acpi: loading...
Oct 28 14:53:42 ubuntu kernel: [17179838.892000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Oct 28 14:54:01 ubuntu kernel: [17179864.924000] lp0: using parport0 (interrupt-driven).
Oct 28 14:54:03 ubuntu kernel: [17179866.432000] ppdev: user-space parallel port driver
Oct 28 14:54:27 ubuntu hpiod: 1.6.9 accepting connections at 2208...
Oct 28 14:54:52 ubuntu gconfd (ubuntu-5914): starting (version 2.16.0), pid 5914 user 'ubuntu'
Oct 28 14:54:52 ubuntu gconfd (ubuntu-5914): Resolved address "xml:readonly:
Oct 28 14:54:52 ubuntu gconfd (ubuntu-5914): Resolved address "xml:readwrite:
Oct 28 14:54:52 ubuntu gconfd (ubuntu-5914): Resolved address "xml:readonly:
Oct 28 14:54:52 ubuntu gconfd (ubuntu-5914): Resolved address "xml:readonly:
Oct 28 14:54:52 ubuntu gconfd (ubuntu-5914): Resolved address "xml:readonly:
Oct 28 14:54:53 ubuntu kernel: [17179916.452000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 28 14:54:53 ubuntu kernel: [17179916.452000] apm: overridden by ACPI.
Oct 28 14:56:20 ubuntu hcid[6098]: Bluetooth HCI daemon
Oct 28 14:56:20 ubuntu kernel: [17180003.904000] Bluetooth: Core ver 2.8
Oct 28 14:56:20 ubuntu kernel: [17180003.908000] NET: Registered protocol family 31
Oct 28 14:56:20 ubuntu kernel: [17180003.908000] Bluetooth: HCI device and connection manager initialized
Oct 28 14:56:20 ubuntu kernel: [17180003.908000] Bluetooth: HCI socket layer initialized
Oct 28 14:56:22 ubuntu hcid[6098]: Register path:/org/bluez fallback:1
Oct 28 14:56:23 ubuntu sdpd[6100]: Bluetooth SDP daemon
Oct 28 14:56:23 ubuntu kernel: [17180006.840000] Bluetooth: L2CAP ver 2.8
Oct 28 14:56:23 ubuntu kernel: [17180006.840000] Bluetooth: L2CAP socket layer initialized
Oct 28 14:56:24 ubuntu kernel: [17180007.976000] Bluetooth: RFCOMM socket layer initialized
Oct 28 14:56:24 ubuntu kernel: [17180007.976000] Bluetooth: RFCOMM TTY layer initialized
Oct 28 14:56:24 ubuntu kernel: [17180007.976000] Bluetooth: RFCOMM ver 1.7
Oct 28 14:56:29 ubuntu /usr/sbin/
Oct 28 14:56:29 ubuntu /usr/sbin/
Oct 28 14:56:30 ubuntu /usr/sbin/
Oct 28 14:57:23 ubuntu gconfd (ubuntu-5914): Resolved address "xml:readwrite:
Oct 28 15:03:56 ubuntu ubiquity[6503]: Ubiquity 1.2.5
Oct 28 15:04:19 ubuntu ubiquity[6503]: log-output -t ubiquity laptop-detect
Oct 28 15:05:10 ubuntu ubiquity[6503]: switched to page stepLanguage
Oct 28 15:05:13 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/
Oct 28 15:05:13 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^languagechoose
Oct 28 15:05:20 ubuntu localechooser: info: LANGNAME=English
Oct 28 15:05:20 ubuntu localechooser: info: line=English;
Oct 28 15:05:20 ubuntu localechooser: info: Set debian-
Oct 28 15:05:20 ubuntu localechooser: info: Set debian-
Oct 28 15:05:20 ubuntu localechooser: info: Set debian-
Oct 28 15:05:20 ubuntu localechooser: info: Set debian-
Oct 28 15:05:20 ubuntu localechooser: info: Set debian-
Oct 28 15:05:20 ubuntu localechooser: info: Set debconf/language = 'en'
Oct 28 15:05:21 ubuntu localechooser: info: Set countrychooser/
Oct 28 15:05:21 ubuntu localechooser: info: Set debian-
Oct 28 15:05:21 ubuntu localechooser: info: Set debian-
Oct 28 15:05:23 ubuntu ubiquity[6503]: debconffilter_done: Language (current: Language)
Oct 28 15:05:23 ubuntu ubiquity[6503]: Step_before = stepLanguage
Oct 28 15:05:27 ubuntu ubiquity[6503]: switched to page stepLocation
Oct 28 15:05:27 ubuntu ubiquity[6503]: Step_after = stepLocation
Oct 28 15:05:32 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/
Oct 28 15:05:32 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^time/zone$
Oct 28 15:05:35 ubuntu localechooser: info: Locale has been preseeded to en_US.UTF-8
Oct 28 15:05:35 ubuntu localechooser: info: Set languagechooser
Oct 28 15:05:35 ubuntu localechooser: info: Set countrychooser/
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: LANGNAME=English
Oct 28 15:05:35 ubuntu localechooser: info: line=English;
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: Set debconf/language = 'en'
Oct 28 15:05:35 ubuntu localechooser: info: Set countrychooser/
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:35 ubuntu localechooser: info: Set debian-
Oct 28 15:05:37 ubuntu ubiquity[6503]: debconffilter_done: Timezone (current: Timezone)
Oct 28 15:05:37 ubuntu ubiquity[6503]: Step_before = stepLocation
Oct 28 15:05:37 ubuntu ubiquity[6503]: switched to page stepKeyboardConf
Oct 28 15:05:37 ubuntu ubiquity[6503]: Step_after = stepKeyboardConf
Oct 28 15:05:42 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/
Oct 28 15:05:42 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^console-
Oct 28 15:05:44 ubuntu ubiquity[6503]: ubiquity: Setting keyboard layout: pc105 us []
Oct 28 15:05:49 ubuntu ubiquity[6503]: log-output -t ubiquity setxkbmap -model pc105 -layout us
Oct 28 15:06:03 ubuntu ubiquity: Your console configuration will be updated the next time your system boots.
Oct 28 15:06:03 ubuntu ubiquity: If you want to update it now, run 'setupcon' from a virtual console.
Oct 28 15:06:04 ubuntu ubiquity[6503]: log-output -t ubiquity setxkbmap -model pc105 -layout us -option lv3:ralt_switch
Oct 28 15:06:04 ubuntu ubiquity[6503]: debconffilter_done: ConsoleSetup (current: ConsoleSetup)
Oct 28 15:06:04 ubuntu ubiquity[6503]: Step_before = stepKeyboardConf
Oct 28 15:06:04 ubuntu ubiquity[6503]: switched to page stepUserInfo
Oct 28 15:06:04 ubuntu ubiquity[6503]: Step_after = stepUserInfo
Oct 28 15:06:06 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/
Oct 28 15:06:06 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^passwd/
Oct 28 15:06:33 ubuntu ubiquity[6503]: debconffilter_done: UserSetup (current: UserSetup)
Oct 28 15:06:33 ubuntu ubiquity[6503]: Step_before = stepUserInfo
Oct 28 15:06:33 ubuntu ubiquity[6503]: switched to page stepPartDisk
Oct 28 15:06:33 ubuntu ubiquity[6503]: Step_after = stepPartDisk
Oct 28 15:06:36 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.
Oct 28 15:06:36 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^partman-
Oct 28 15:06:38 ubuntu ubiquity: unsupported
Oct 28 15:06:38 ubuntu ubiquity: kernelmodules_
Oct 28 15:06:41 ubuntu kernel: [17180624.696000] NTFS driver 2.1.27 [Flags: R/O MODULE].
Oct 28 15:06:41 ubuntu ubiquity: kernelmodules_ext3
Oct 28 15:06:41 ubuntu ubiquity: kernelmodules_jfs
Oct 28 15:06:42 ubuntu kernel: [17180625.360000] JFS: nTxBlock = 1999, nTxLock = 15993
Oct 28 15:06:42 ubuntu ubiquity: kernelmodules_
Oct 28 15:06:42 ubuntu ubiquity: kernelmodules_xfs
Oct 28 15:06:43 ubuntu kernel: [17180626.596000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Oct 28 15:06:43 ubuntu kernel: [17180626.596000] SGI XFS Quota Management subsystem
Oct 28 15:06:43 ubuntu ubiquity: umount_target
Oct 28 15:06:43 ubuntu ubiquity: parted
Oct 28 15:07:23 ubuntu kernel: [17180666.688000] end_request: I/O error, dev fd0, sector 0
Oct 28 15:08:01 ubuntu kernel: [17180704.792000] end_request: I/O error, dev fd0, sector 0
Oct 28 15:08:03 ubuntu ubiquity: dump
Oct 28 15:08:03 ubuntu ubiquity: update_partitions
Oct 28 15:08:04 ubuntu ubiquity: filesystems_
Oct 28 15:08:04 ubuntu ubiquity: auto_mountpoints
Oct 28 15:08:06 ubuntu ubiquity: autouse_swap
Oct 28 15:08:06 ubuntu ubiquity: backup
Oct 28 15:08:08 ubuntu ubiquity[6503]: switched to page stepPartAuto
Oct 28 15:08:22 ubuntu ubiquity[6503]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman'] exited with code 10
Oct 28 15:08:23 ubuntu ubiquity[6503]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Oct 28 15:08:23 ubuntu ubiquity[6503]: Step_before = stepPartAuto
Oct 28 15:08:23 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:08:24 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33556985
Oct 28 15:08:46 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:08:46 ubuntu ubiquity[6503]: Step_after = stepPartAdvanced
Oct 28 15:09:31 ubuntu ubiquity[6503]: Step_before = stepPartAdvanced
Oct 28 15:09:31 ubuntu ubiquity[6503]: gparted replied: 0 OK
Oct 28 15:09:36 ubuntu ubiquity[6503]: switched to page stepPartMountpoints
Oct 28 15:09:36 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:10:07 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:10:07 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33557725
Oct 28 15:10:09 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:10:41 ubuntu ubiquity[6503]: switched to page stepPartDisk
Oct 28 15:10:53 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.
Oct 28 15:10:53 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^partman-
Oct 28 15:10:55 ubuntu ubiquity: unsupported
Oct 28 15:10:55 ubuntu ubiquity: kernelmodules_
Oct 28 15:10:55 ubuntu ubiquity: kernelmodules_ext3
Oct 28 15:10:55 ubuntu ubiquity: kernelmodules_jfs
Oct 28 15:10:55 ubuntu ubiquity: kernelmodules_
Oct 28 15:10:55 ubuntu ubiquity: kernelmodules_xfs
Oct 28 15:10:55 ubuntu ubiquity: umount_target
Oct 28 15:10:56 ubuntu ubiquity: parted
Oct 28 15:11:35 ubuntu kernel: [17180918.620000] end_request: I/O error, dev fd0, sector 0
Oct 28 15:12:13 ubuntu kernel: [17180956.724000] end_request: I/O error, dev fd0, sector 0
Oct 28 15:12:13 ubuntu ubiquity: dump
Oct 28 15:12:13 ubuntu ubiquity: update_partitions
Oct 28 15:12:14 ubuntu ubiquity: filesystems_
Oct 28 15:12:14 ubuntu ubiquity: auto_mountpoints
Oct 28 15:12:16 ubuntu ubiquity: autouse_swap
Oct 28 15:12:17 ubuntu ubiquity: backup
Oct 28 15:12:18 ubuntu ubiquity[6503]: switched to page stepPartAuto
Oct 28 15:12:48 ubuntu ubiquity[6503]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman'] exited with code 10
Oct 28 15:12:50 ubuntu ubiquity[6503]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Oct 28 15:12:50 ubuntu ubiquity[6503]: Step_before = stepPartAuto
Oct 28 15:12:50 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:12:50 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33558651
Oct 28 15:12:53 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:12:53 ubuntu ubiquity[6503]: Step_after = stepPartAdvanced
Oct 28 15:13:20 ubuntu ubiquity[6503]: Step_before = stepPartAdvanced
Oct 28 15:13:20 ubuntu ubiquity[6503]: gparted replied: 0 OK
Oct 28 15:13:20 ubuntu ubiquity[6503]: switched to page stepPartMountpoints
Oct 28 15:13:20 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:14:01 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:14:01 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', False, None, None)}
Oct 28 15:14:01 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:14:34 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:14:34 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', False, None, None)}
Oct 28 15:14:34 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:14:38 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:14:38 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', False, None, None)}
Oct 28 15:14:39 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:14:52 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:14:52 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33560762
Oct 28 15:14:54 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:17:03 ubuntu /USR/SBIN/
Oct 28 15:17:35 ubuntu ubiquity[6503]: Step_before = stepPartAdvanced
Oct 28 15:33:39 ubuntu -- MARK --
Oct 28 15:42:16 ubuntu ubiquity[6503]: gparted replied: - FORMAT /dev/hda3 ext3
Oct 28 15:42:16 ubuntu ubiquity[6503]: gparted replied: 0 OK
Oct 28 15:42:24 ubuntu ubiquity[6503]: switched to page stepPartMountpoints
Oct 28 15:42:24 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:42:50 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:42:50 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', False, None, None), '/dev/hda3': ('/usr', True, 'ext3', [])}
Oct 28 15:42:52 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:43:26 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:43:26 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33562189 --filesystem /dev/hda3:ext3
Oct 28 15:43:47 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:45:38 ubuntu ubiquity[6503]: Step_before = stepPartAdvanced
Oct 28 15:45:39 ubuntu ubiquity[6503]: gparted replied: - FORMAT /dev/hda3 ext3
Oct 28 15:45:39 ubuntu ubiquity[6503]: gparted replied: 0 OK
Oct 28 15:45:39 ubuntu ubiquity[6503]: switched to page stepPartMountpoints
Oct 28 15:45:39 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:45:56 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:45:56 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', True, None, None), '/dev/hda3': ('/media/hda1', True, 'ext3', [])}
Oct 28 15:45:56 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:46:22 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:46:22 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33563230 --filesystem /dev/hda3:ext3
Oct 28 15:46:26 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:46:53 ubuntu ubiquity[6503]: Step_before = stepPartAdvanced
Oct 28 15:54:58 ubuntu ubiquity[6503]: gparted replied: 0 OK
Oct 28 15:55:07 ubuntu ubiquity[6503]: switched to page stepPartMountpoints
Oct 28 15:55:07 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:55:25 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:55:25 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/media/hda1', False, None, None)}
Oct 28 15:55:27 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:55:31 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:55:31 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', False, None, None)}
Oct 28 15:55:31 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:55:36 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:55:36 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', True, None, None)}
Oct 28 15:55:36 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:55:46 ubuntu ubiquity[6503]: Step_before = stepPartMountpoints
Oct 28 15:55:46 ubuntu ubiquity[6503]: mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', True, None, None)}
Oct 28 15:55:46 ubuntu ubiquity[6503]: Step_after = stepPartMountpoints
Oct 28 15:55:48 ubuntu ubiquity[6503]: gparted_loop()
Oct 28 15:55:48 ubuntu ubiquity[6503]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 33564339
Oct 28 15:56:14 ubuntu ubiquity[6503]: switched to page stepPartAdvanced
Oct 28 15:56:40 ubuntu ubiquity[6503]: switched to page stepPartDisk
Oct 28 15:56:56 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.
Oct 28 15:56:56 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^partman-
Oct 28 15:57:00 ubuntu ubiquity: unsupported
Oct 28 15:57:01 ubuntu ubiquity: kernelmodules_
Oct 28 15:57:01 ubuntu ubiquity: kernelmodules_ext3
Oct 28 15:57:02 ubuntu ubiquity: kernelmodules_jfs
Oct 28 15:57:02 ubuntu ubiquity: kernelmodules_
Oct 28 15:57:02 ubuntu ubiquity: kernelmodules_xfs
Oct 28 15:57:02 ubuntu ubiquity: umount_target
Oct 28 15:57:03 ubuntu ubiquity: parted
Oct 28 15:57:45 ubuntu kernel: [17183686.008000] end_request: I/O error, dev fd0, sector 0
Oct 28 15:58:21 ubuntu kernel: [17183724.112000] end_request: I/O error, dev fd0, sector 0
Oct 28 15:58:21 ubuntu ubiquity: dump
Oct 28 15:58:21 ubuntu ubiquity: update_partitions
Oct 28 15:58:23 ubuntu ubiquity: filesystems_
Oct 28 15:58:23 ubuntu ubiquity: auto_mountpoints
Oct 28 15:58:27 ubuntu ubiquity: autouse_swap
Oct 28 15:58:28 ubuntu ubiquity: backup
Oct 28 15:58:32 ubuntu ubiquity[6503]: switched to page stepPartAuto
Oct 28 15:59:11 ubuntu kernel: [17183777.904000] Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k
Oct 28 15:59:12 ubuntu ubiquity: swapon: /dev/hda5: Device or resource busy
Oct 28 15:59:12 ubuntu last message repeated 3 times
Oct 28 15:59:24 ubuntu ubiquity[6503]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Oct 28 15:59:24 ubuntu ubiquity[6503]: Step_before = stepPartAuto
Oct 28 15:59:24 ubuntu ubiquity[6503]: switched to page stepReady
Oct 28 15:59:25 ubuntu ubiquity[6503]: Step_after = stepReady
Oct 28 15:59:28 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/
Oct 28 15:59:28 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Oct 28 15:59:32 ubuntu ubiquity[6503]: debconffilter_done: Summary (current: Summary)
Oct 28 15:59:53 ubuntu ubiquity[6503]: Step_before = stepReady
Oct 28 15:59:53 ubuntu ubiquity[6503]: progress_loop()
Oct 28 15:59:58 ubuntu gconfd (root-11818): starting (version 2.16.0), pid 11818 user 'root'
Oct 28 15:59:58 ubuntu gconfd (root-11818): Resolved address "xml:readonly:
Oct 28 15:59:58 ubuntu gconfd (root-11818): Resolved address "xml:readwrite:
Oct 28 15:59:58 ubuntu gconfd (root-11818): Resolved address "xml:readonly:
Oct 28 15:59:58 ubuntu gconfd (root-11818): Resolved address "xml:readonly:
Oct 28 15:59:58 ubuntu gconfd (root-11818): Resolved address "xml:readonly:
Oct 28 15:59:58 ubuntu gconfd (root-11818): Resolved address "xml:readwrite:
Oct 28 16:00:01 ubuntu ubiquity[6503]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman-
Oct 28 16:00:01 ubuntu ubiquity[6503]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Oct 28 16:00:04 ubuntu ubiquity: unsupported
Oct 28 16:00:04 ubuntu ubiquity: kernelmodules_
Oct 28 16:00:04 ubuntu ubiquity: kernelmodules_ext3
Oct 28 16:00:04 ubuntu ubiquity: kernelmodules_jfs
Oct 28 16:00:04 ubuntu ubiquity: kernelmodules_
Oct 28 16:00:04 ubuntu ubiquity: kernelmodules_xfs
Oct 28 16:00:04 ubuntu ubiquity: umount_target
Oct 28 16:00:04 ubuntu ubiquity: parted
Oct 28 16:00:04 ubuntu ubiquity
Thank you for reporting and providing logs.
Notes: The advanced partitioner is used and there are several mountpoint statements in here. The last being:
mountpoints: {'/dev/hda5': ('swap', True, None, None), '/dev/hda1': ('/', True, None, None)}
There may be some odd circular mounting going on here though: /dev/hda1' is mounted as '/' in the end, but earlier also as '/media/hda1' However, '/dev/hda3' is also mounted as '/media/hda1'. I guess the last one should stick, but parted/ubiquity might be getting confused here.
hda1 is 34 GB, but hda3 is only 2.2GB
Colin, I'm giving this a medium importance due to its relative oddness Please correct as needed.