Here are the kernel messages that appeared during the instalation. I tried to do some things when freezed and maybe there is many times the same output:
[17181505.668000] <c0135ee0> kthread+0x0/0xe0 <c0101005>
kernel_thread_helper+0x5/0x10
[17181505.668000] ata1: status=0x50 { DriveReady SeekComplete }
[17181505.668000] sda: Current: sense key: No Sense
[17181505.668000] Additional sense: No additional sense information
[17181505.668000] Info fld=0x9470250
[17181535.672000] ata1: handling error/timeout
[17181535.672000] ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf 80 ss 113 se 0
[17181535.672000] BUG: warning at drivers/scsi/ahci.c:1283/ahci_host_intr()
[17181535.672000] <f885fcbf> ahci_interrupt+0x1ef/0x200 [ahci]
<c0149323> handle_IRQ_event+0x33/0x60
[17181535.672000] <c01493ed> __do_IRQ+0x9d/0x110 <c0122e9b> printk+0x1b/0x20
[17181535.672000] <c0105c89> do_IRQ+0x19/0x30 <c010408a>
common_interrupt+0x1a/0x20
[17181535.672000] <c02daad9> _spin_unlock_irqrestore+0x9/0x10
<f8860048> ahci_eng_timeout+0x78/0xa0 [ahci]
[17181535.672000] <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<f88acf5f> ata_scsi_error+0x5f/0x130 [libata]
[17181535.672000] <f88c1fc3> scsi_error_handler+0xd3/0xc90 [scsi_mod]
<c011c930> complete+0x40/0x60
[17181535.672000] <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<c0135f8b> kthread+0xab/0xe0
[17181535.672000] <c0135ee0> kthread+0x0/0xe0 <c0101005>
kernel_thread_helper+0x5/0x10
[17181535.672000] ata1: status=0x50 { DriveReady SeekComplete }
[17181535.672000] sda: Current: sense key: No Sense
[17181535.672000] Additional sense: No additional sense information
[17181565.680000] ata1: handling error/timeout
[17181565.680000] ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf 80 ss 113 se 0
[17181565.680000] BUG: warning at drivers/scsi/ahci.c:1283/ahci_host_intr()
[17181565.680000] <f885fcbf> ahci_interrupt+0x1ef/0x200 [ahci]
<c0149323> handle_IRQ_event+0x33/0x60
[17181565.680000] <c01493ed> __do_IRQ+0x9d/0x110 <c0122e9b> printk+0x1b/0x20
[17181565.680000] <c0105c89> do_IRQ+0x19/0x30 <c010408a>
common_interrupt+0x1a/0x20
[17181565.680000] <c02daad9> _spin_unlock_irqrestore+0x9/0x10
<f8860048> ahci_eng_timeout+0x78/0xa0 [ahci]
[17181565.680000] <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<f88acf5f> ata_scsi_error+0x5f/0x130 [libata]
[17181565.680000] <f88c1fc3> scsi_error_handler+0xd3/0xc90 [scsi_mod]
<c011c930> complete+0x40/0x60
[17181565.680000] <f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
<c0135f8b> kthread+0xab/0xe0
[17181565.680000] <c0135ee0> kthread+0x0/0xe0 <c0101005>
kernel_thread_helper+0x5/0x10
[17181565.684000] BUG: warning at drivers/scsi/ahci.c:1283/ahci_host_intr()
[17181565.684000] <f885fcbf> ahci_interrupt+0x1ef/0x200 [ahci]
<c0149323> handle_IRQ_event+0x33/0x60
[17181565.684000] <c01493ed> __do_IRQ+0x9d/0x110 <c0105c89> do_IRQ+0x19/0x30
[17181565.684000] <c010408a> common_interrupt+0x1a/0x20 <c02daad9>
_spin_unlock_irqrestore+0x9/0x10
[17181565.684000] <f8860048> ahci_eng_timeout+0x78/0xa0 [ahci]
<f88c1ef0> scsi_error_handler+0x0/0xc90 [scsi_mod]
[17181565.684000] <f88acf5f> ata_scsi_error+0x5f/0x130 [libata]
<f88c1fc3> scsi_error_handler+0xd3/0xc90 [scsi_mod]
[17181565.684000] <c011c930> complete+0x40/0x60 <f88c1ef0>
scsi_error_handler+0x0/0xc90 [scsi_mod]
[17181565.684000] <c0135f8b> kthread+0xab/0xe0 <c0135ee0> kthread+0x0/0xe0
[17181565.684000] <c0101005> kernel_thread_helper+0x5/0x10
And here is the Installer crashed output:
Traceback (most recent call last):
File "/usr/bin/ubiquity", line 166, in ?
main()
File "/usr/bin/ubiquity", line 161, in main
install(sys.argv[1])
File "/usr/bin/ubiquity", line 57, in install
ret = wizard.run()
File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
self.process_step()
File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
self.progress_loop()
File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 628, in progress_loop
raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
File "/usr/share/ubiquity/install.py", line 1404, in ?
install.run()
File "/usr/share/ubiquity/install.py", line 306, in run
self.copy_all()
File "/usr/share/ubiquity/install.py", line 484, in copy_all
shutil.copyfile(sourcepath, targetpath)
File "shutil.py", line 49, in copyfile
copyfileobj(fsrc, fdst)
File "shutil.py", line 25, in copyfileobj
fdst.write(buf)
IOError: [Errno 30] Read-only file system
If it has no sense is because I tried to force some times the hard disk to work O:-) Anyway I think the kernel output will be enough.
Here are the kernel messages that appeared during the instalation. I tried to do some things when freezed and maybe there is many times the same output:
[17181505.668000] <c0135ee0> kthread+0x0/0xe0 <c0101005> thread_ helper+ 0x5/0x10 scsi/ahci. c:1283/ ahci_host_ intr() 0x1ef/0x200 [ahci] IRQ_event+ 0x33/0x60 interrupt+ 0x1a/0x20 irqrestore+ 0x9/0x10 timeout+ 0x78/0xa0 [ahci] handler+ 0x0/0xc90 [scsi_mod] error+0x5f/ 0x130 [libata] handler+ 0xd3/0xc90 [scsi_mod] handler+ 0x0/0xc90 [scsi_mod] thread_ helper+ 0x5/0x10 scsi/ahci. c:1283/ ahci_host_ intr() 0x1ef/0x200 [ahci] IRQ_event+ 0x33/0x60 interrupt+ 0x1a/0x20 irqrestore+ 0x9/0x10 timeout+ 0x78/0xa0 [ahci] handler+ 0x0/0xc90 [scsi_mod] error+0x5f/ 0x130 [libata] handler+ 0xd3/0xc90 [scsi_mod] handler+ 0x0/0xc90 [scsi_mod] thread_ helper+ 0x5/0x10 scsi/ahci. c:1283/ ahci_host_ intr() 0x1ef/0x200 [ahci] IRQ_event+ 0x33/0x60 interrupt+ 0x1a/0x20 <c02daad9> irqrestore+ 0x9/0x10 timeout+ 0x78/0xa0 [ahci] handler+ 0x0/0xc90 [scsi_mod] error+0x5f/ 0x130 [libata] handler+ 0xd3/0xc90 [scsi_mod] handler+ 0x0/0xc90 [scsi_mod] thread_ helper+ 0x5/0x10
kernel_
[17181505.668000] ata1: status=0x50 { DriveReady SeekComplete }
[17181505.668000] sda: Current: sense key: No Sense
[17181505.668000] Additional sense: No additional sense information
[17181505.668000] Info fld=0x9470250
[17181535.672000] ata1: handling error/timeout
[17181535.672000] ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf 80 ss 113 se 0
[17181535.672000] BUG: warning at drivers/
[17181535.672000] <f885fcbf> ahci_interrupt+
<c0149323> handle_
[17181535.672000] <c01493ed> __do_IRQ+0x9d/0x110 <c0122e9b> printk+0x1b/0x20
[17181535.672000] <c0105c89> do_IRQ+0x19/0x30 <c010408a>
common_
[17181535.672000] <c02daad9> _spin_unlock_
<f8860048> ahci_eng_
[17181535.672000] <f88c1ef0> scsi_error_
<f88acf5f> ata_scsi_
[17181535.672000] <f88c1fc3> scsi_error_
<c011c930> complete+0x40/0x60
[17181535.672000] <f88c1ef0> scsi_error_
<c0135f8b> kthread+0xab/0xe0
[17181535.672000] <c0135ee0> kthread+0x0/0xe0 <c0101005>
kernel_
[17181535.672000] ata1: status=0x50 { DriveReady SeekComplete }
[17181535.672000] sda: Current: sense key: No Sense
[17181535.672000] Additional sense: No additional sense information
[17181565.680000] ata1: handling error/timeout
[17181565.680000] ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf 80 ss 113 se 0
[17181565.680000] BUG: warning at drivers/
[17181565.680000] <f885fcbf> ahci_interrupt+
<c0149323> handle_
[17181565.680000] <c01493ed> __do_IRQ+0x9d/0x110 <c0122e9b> printk+0x1b/0x20
[17181565.680000] <c0105c89> do_IRQ+0x19/0x30 <c010408a>
common_
[17181565.680000] <c02daad9> _spin_unlock_
<f8860048> ahci_eng_
[17181565.680000] <f88c1ef0> scsi_error_
<f88acf5f> ata_scsi_
[17181565.680000] <f88c1fc3> scsi_error_
<c011c930> complete+0x40/0x60
[17181565.680000] <f88c1ef0> scsi_error_
<c0135f8b> kthread+0xab/0xe0
[17181565.680000] <c0135ee0> kthread+0x0/0xe0 <c0101005>
kernel_
[17181565.684000] BUG: warning at drivers/
[17181565.684000] <f885fcbf> ahci_interrupt+
<c0149323> handle_
[17181565.684000] <c01493ed> __do_IRQ+0x9d/0x110 <c0105c89> do_IRQ+0x19/0x30
[17181565.684000] <c010408a> common_
_spin_unlock_
[17181565.684000] <f8860048> ahci_eng_
<f88c1ef0> scsi_error_
[17181565.684000] <f88acf5f> ata_scsi_
<f88c1fc3> scsi_error_
[17181565.684000] <c011c930> complete+0x40/0x60 <f88c1ef0>
scsi_error_
[17181565.684000] <c0135f8b> kthread+0xab/0xe0 <c0135ee0> kthread+0x0/0xe0
[17181565.684000] <c0101005> kernel_
And here is the Installer crashed output:
Traceback (most recent call last): ubiquity" , line 166, in ? ubiquity" , line 161, in main sys.argv[ 1]) ubiquity" , line 57, in install ubiquity/ ubiquity/ frontend/ gtkui.py" , line 305, in run process_ step() ubiquity/ ubiquity/ frontend/ gtkui.py" , line 856, in process_step progress_ loop() ubiquity/ ubiquity/ frontend/ gtkui.py" , line 628, in progress_loop ubiquity/ install. py", line 1404, in ? ubiquity/ install. py", line 306, in run ubiquity/ install. py", line 484, in copy_all copyfile( sourcepath, targetpath) (fsrc, fdst)
File "/usr/bin/
main()
File "/usr/bin/
install(
File "/usr/bin/
ret = wizard.run()
File "/usr/lib/
self.
File "/usr/lib/
self.
File "/usr/lib/
raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
File "/usr/share/
install.run()
File "/usr/share/
self.copy_all()
File "/usr/share/
shutil.
File "shutil.py", line 49, in copyfile
copyfileobj
File "shutil.py", line 25, in copyfileobj
fdst.write(buf)
IOError: [Errno 30] Read-only file system
If it has no sense is because I tried to force some times the hard disk to work O:-) Anyway I think the kernel output will be enough.