[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005f7d0000 (usable) [ 0.000000] BIOS-e820: 000000005f7d0000 - 000000005f7e5600 (reserved) [ 0.000000] BIOS-e820: 000000005f7e5600 - 000000005f7f8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005f7f8000 - 000000005f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x5f7d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base F5F800000 mask FFF800000 uncachable [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005f7d0000 (usable) [ 0.000000] modified: 000000005f7d0000 - 000000005f7e5600 (reserved) [ 0.000000] modified: 000000005f7e5600 - 000000005f7f8000 (ACPI NVS) [ 0.000000] modified: 000000005f7f8000 - 000000005f800000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37856000 - 37fef49e [ 0.000000] Allocated new RAMDISK: 008de000 - 0107749e [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef49d to 008de000 - 0107749d [ 0.000000] ACPI: RSDP 000f7830 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 5f7e57c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 5f7e5684 000F4 (v04 HP 30D5 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 5f7e5acc 0E974 (v01 HP hp 520 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 5f7f7e80 00040 [ 0.000000] ACPI: SLIC 5f7e5844 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 5f7e59bc 00038 (v01 HP 30D5 00000001 HP 00000001) [ 0.000000] ACPI: APIC 5f7e59f4 00068 (v01 HP 30D5 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 5f7e5a5c 0003C (v01 HP 30D5 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 5f7e5a98 00032 (v02 HP 30D5 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 5f7f4440 00024 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 5f7f4464 00326 (v01 HP HPQSAT 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 5f7f4fdf 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 5f7f523e 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 5f7f52e4 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd14c] BRK ==> [00008da000 - 00008dd14c] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 000107749e] NEW RAMDISK ==> [00008de000 - 000107749e] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005f7d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005f7d0 [ 0.000000] On node 0 totalpages: 391019 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1280 pages used for memmap [ 0.000000] HighMem zone: 162514 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 5f800000 (gap: 5f800000:9f400000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387963 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=4d5c2f69-7f51-484a-9b8f-047e8d14dd33 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7822400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f7d0) [ 0.000000] Memory: 1526356k/1564480k available (4673k kernel code, 36672k reserved, 2121k data, 656k init, 655176k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2161.182 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.36 BogoMIPS (lpj=8644728) [ 0.004024] Security Framework initialized [ 0.004048] AppArmor: AppArmor initialized [ 0.004055] Mount-cache hash table entries: 512 [ 0.004186] Initializing cgroup subsys ns [ 0.004192] Initializing cgroup subsys cpuacct [ 0.004196] Initializing cgroup subsys memory [ 0.004203] Initializing cgroup subsys devices [ 0.004206] Initializing cgroup subsys freezer [ 0.004209] Initializing cgroup subsys net_cls [ 0.004231] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004234] CPU: L2 cache: 2048K [ 0.004237] CPU: Physical Processor ID: 0 [ 0.004239] CPU: Processor Core ID: 0 [ 0.004243] mce: CPU supports 6 MCE banks [ 0.004252] CPU0: Thermal monitoring handled by SMI [ 0.004256] using mwait in idle threads. [ 0.004263] Performance Events: no PMU driver, software events only. [ 0.004270] Checking 'hlt' instruction... OK. [ 0.023079] ACPI: Core revision 20090903 [ 0.044009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044015] ftrace: allocating 21771 entries in 43 pages [ 0.048062] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.089077] CPU0: Intel(R) Core(TM) Duo CPU T2600 @ 2.16GHz stepping 0c [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.176067] CPU1: Intel(R) Core(TM) Duo CPU T2600 @ 2.16GHz stepping 0c [ 0.176081] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.180018] Brought up 2 CPUs [ 0.180021] Total of 2 processors activated (8644.92 BogoMIPS). [ 0.180479] CPU0 attaching sched-domain: [ 0.180482] domain 0: span 0-1 level MC [ 0.180485] groups: 0 1 [ 0.180491] CPU1 attaching sched-domain: [ 0.180493] domain 0: span 0-1 level MC [ 0.180496] groups: 1 0 [ 0.180604] devtmpfs: initialized [ 0.180604] regulator: core version 0.5 [ 0.180604] Time: 10:45:27 Date: 05/15/10 [ 0.180604] NET: Registered protocol family 16 [ 0.180604] Trying to unpack rootfs image as initramfs... [ 0.180604] EISA bus registered [ 0.180604] ACPI: bus type pci registered [ 0.180604] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.180604] PCI: Not using MMCONFIG. [ 0.181472] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16 [ 0.181474] PCI: Using configuration type 1 for base access [ 0.184109] bio: create slab at 0 [ 0.185148] ACPI: EC: Look up EC in DSDT [ 0.212138] ACPI: Interpreter enabled [ 0.212152] ACPI: (supports S0 S3 S4 S5) [ 0.212174] ACPI: Using IOAPIC for interrupt routing [ 0.212229] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.216995] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.216998] PCI: Using MMCONFIG for extended config space [ 0.217372] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.222872] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.222938] ACPI: Power Resource [C1FE] (on) [ 0.222974] ACPI: Power Resource [C206] (on) [ 0.223059] ACPI: Power Resource [C2EE] (off) [ 0.223136] ACPI: Power Resource [C2EF] (off) [ 0.223212] ACPI: Power Resource [C2F0] (off) [ 0.223288] ACPI: Power Resource [C2F1] (off) [ 0.223639] ACPI: No dock devices found. [ 0.227869] ACPI: PCI Root Bridge [C002] (0000:00) [ 0.227973] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0400000-0xf047ffff] [ 0.227978] pci 0000:00:02.0: reg 14 io port: [0x3000-0x3007] [ 0.227983] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.227989] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0480000-0xf04bffff] [ 0.228042] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0500000-0xf057ffff] [ 0.228161] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0580000-0xf0583fff] [ 0.228222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.228227] pci 0000:00:1b.0: PME# disabled [ 0.228321] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.228326] pci 0000:00:1c.0: PME# disabled [ 0.228422] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.228427] pci 0000:00:1c.1: PME# disabled [ 0.228498] pci 0000:00:1d.0: reg 20 io port: [0x3020-0x303f] [ 0.228571] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0584000-0xf05843ff] [ 0.228633] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.228639] pci 0000:00:1d.7: PME# disabled [ 0.228814] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.228819] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.228824] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.228829] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f) [ 0.228835] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007) [ 0.228887] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.228896] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.228904] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.228912] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.228920] pci 0000:00:1f.1: reg 20 io port: [0x3040-0x304f] [ 0.228984] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.228992] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.229000] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.229008] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.229016] pci 0000:00:1f.2: reg 20 io port: [0x3070-0x307f] [ 0.229025] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0585000-0xf05853ff] [ 0.229061] pci 0000:00:1f.2: PME# supported from D3hot [ 0.229066] pci 0000:00:1f.2: PME# disabled [ 0.229297] pci 0000:10:00.0: reg 10 32bit mmio: [0xf0000000-0xf0000fff] [ 0.229542] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.229555] pci 0000:10:00.0: PME# disabled [ 0.229672] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf00fffff] [ 0.229742] pci 0000:02:06.0: reg 10 32bit mmio: [0xf0100000-0xf0100fff] [ 0.229770] pci 0000:02:06.0: supports D1 D2 [ 0.229772] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229778] pci 0000:02:06.0: PME# disabled [ 0.229822] pci 0000:02:08.0: reg 10 32bit mmio: [0xf0101000-0xf0101fff] [ 0.229830] pci 0000:02:08.0: reg 14 io port: [0x2000-0x203f] [ 0.229884] pci 0000:02:08.0: supports D1 D2 [ 0.229886] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229891] pci 0000:02:08.0: PME# disabled [ 0.229939] pci 0000:00:1e.0: transparent bridge [ 0.229944] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff] [ 0.229949] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0100000-0xf03fffff] [ 0.229999] pci_bus 0000:00: on NUMA node 0 [ 0.230005] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] [ 0.230202] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] [ 0.230326] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C100._PRT] [ 0.230404] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C110._PRT] [ 0.244813] ACPI: PCI Interrupt Link [C10C] (IRQs *10 11) [ 0.244991] ACPI: PCI Interrupt Link [C10D] (IRQs *10 11) [ 0.245164] ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11) [ 0.245328] ACPI: PCI Interrupt Link [C10F] (IRQs 10 11) *0, disabled. [ 0.245502] ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *5 [ 0.245675] ACPI: PCI Interrupt Link [C11D] (IRQs *10 11) [ 0.245841] ACPI: PCI Interrupt Link [C11E] (IRQs 10 11) *0, disabled. [ 0.245920] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184) [ 0.246074] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.246085] vgaarb: loaded [ 0.246212] SCSI subsystem initialized [ 0.246314] libata version 3.00 loaded. [ 0.246392] usbcore: registered new interface driver usbfs [ 0.246405] usbcore: registered new interface driver hub [ 0.246434] usbcore: registered new device driver usb [ 0.246636] ACPI: WMI: Mapper loaded [ 0.246639] PCI: Using ACPI for IRQ routing [ 0.247318] NetLabel: Initializing [ 0.247320] NetLabel: domain hash size = 128 [ 0.247322] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.247336] NetLabel: unlabeled traffic allowed by default [ 0.247376] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.247381] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.252015] Switching to clocksource tsc [ 0.254074] AppArmor: AppArmor Filesystem Enabled [ 0.254092] pnp: PnP ACPI init [ 0.254109] ACPI: bus type pnp registered [ 0.260967] pnp: PnP ACPI: found 12 devices [ 0.260971] ACPI: ACPI bus type pnp unregistered [ 0.260975] PnPBIOS: Disabled by ACPI PNP [ 0.260987] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.260991] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.260994] system 00:00: iomem range 0x100000-0x5f7fffff could not be reserved [ 0.261004] system 00:09: ioport range 0x500-0x57f has been reserved [ 0.261007] system 00:09: ioport range 0x800-0x80f has been reserved [ 0.261010] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.261014] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 0.261019] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.261022] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.261025] system 00:0a: ioport range 0x1100-0x113f has been reserved [ 0.261028] system 00:0a: ioport range 0x1200-0x121f has been reserved [ 0.261032] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.261035] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved [ 0.261038] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.261041] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.261044] system 00:0a: iomem range 0xfed90000-0xfed9afff has been reserved [ 0.261050] system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.261053] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.295823] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.295829] pci 0000:00:1c.0: IO window: 0x4000-0x4fff [ 0.295835] pci 0000:00:1c.0: MEM window: 0x64000000-0x641fffff [ 0.295841] pci 0000:00:1c.0: PREFETCH window: 0x00000064200000-0x000000643fffff [ 0.295849] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.295853] pci 0000:00:1c.1: IO window: 0x5000-0x5fff [ 0.295861] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf00fffff [ 0.295866] pci 0000:00:1c.1: PREFETCH window: 0x00000064400000-0x000000645fffff [ 0.295877] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.295880] pci 0000:02:06.0: IO window: 0x002400-0x0024ff [ 0.295886] pci 0000:02:06.0: IO window: 0x002800-0x0028ff [ 0.295892] pci 0000:02:06.0: PREFETCH window: 0x60000000-0x63ffffff [ 0.295898] pci 0000:02:06.0: MEM window: 0x68000000-0x6bffffff [ 0.295904] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.295908] pci 0000:00:1e.0: IO window: 0x2000-0x2fff [ 0.295914] pci 0000:00:1e.0: MEM window: 0xf0100000-0xf03fffff [ 0.295919] pci 0000:00:1e.0: PREFETCH window: 0x60000000-0x63ffffff [ 0.295943] alloc irq_desc for 16 on node -1 [ 0.295945] alloc kstat_irqs on node -1 [ 0.295952] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.295959] pci 0000:00:1c.0: setting latency timer to 64 [ 0.295969] alloc irq_desc for 17 on node -1 [ 0.295971] alloc kstat_irqs on node -1 [ 0.295974] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.295980] pci 0000:00:1c.1: setting latency timer to 64 [ 0.295988] pci 0000:00:1e.0: setting latency timer to 64 [ 0.296000] alloc irq_desc for 18 on node -1 [ 0.296002] alloc kstat_irqs on node -1 [ 0.296006] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.296016] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.296018] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.296021] pci_bus 0000:08: resource 0 io: [0x4000-0x4fff] [ 0.296024] pci_bus 0000:08: resource 1 mem: [0x64000000-0x641fffff] [ 0.296027] pci_bus 0000:08: resource 2 pref mem [0x64200000-0x643fffff] [ 0.296030] pci_bus 0000:10: resource 0 io: [0x5000-0x5fff] [ 0.296032] pci_bus 0000:10: resource 1 mem: [0xf0000000-0xf00fffff] [ 0.296035] pci_bus 0000:10: resource 2 pref mem [0x64400000-0x645fffff] [ 0.296038] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.296040] pci_bus 0000:02: resource 1 mem: [0xf0100000-0xf03fffff] [ 0.296043] pci_bus 0000:02: resource 2 pref mem [0x60000000-0x63ffffff] [ 0.296046] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.296048] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.296051] pci_bus 0000:03: resource 0 io: [0x2400-0x24ff] [ 0.296054] pci_bus 0000:03: resource 1 io: [0x2800-0x28ff] [ 0.296057] pci_bus 0000:03: resource 2 pref mem [0x60000000-0x63ffffff] [ 0.296059] pci_bus 0000:03: resource 3 mem: [0x68000000-0x6bffffff] [ 0.296102] NET: Registered protocol family 2 [ 0.296206] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.296547] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.297181] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.297507] TCP: Hash tables configured (established 131072 bind 65536) [ 0.297510] TCP reno registered [ 0.297623] NET: Registered protocol family 1 [ 0.297649] pci 0000:00:02.0: Boot video device [ 0.297720] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.297940] cpufreq-nforce2: No nForce2 chipset. [ 0.297975] Scanning for low memory corruption every 60 seconds [ 0.298109] audit: initializing netlink socket (disabled) [ 0.298121] type=2000 audit(1273920326.295:1): initialized [ 0.307853] highmem bounce pool size: 64 pages [ 0.307860] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.309483] VFS: Disk quotas dquot_6.5.2 [ 0.309547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.310159] fuse init (API version 7.13) [ 0.310250] msgmni has been set to 1703 [ 0.310475] alg: No test for stdrng (krng) [ 0.310530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.310534] io scheduler noop registered [ 0.310535] io scheduler anticipatory registered [ 0.310537] io scheduler deadline registered [ 0.310578] io scheduler cfq registered (default) [ 0.310741] alloc irq_desc for 24 on node -1 [ 0.310744] alloc kstat_irqs on node -1 [ 0.310756] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.310768] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.310924] alloc irq_desc for 25 on node -1 [ 0.310926] alloc kstat_irqs on node -1 [ 0.310934] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.310945] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.311048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.311125] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.315531] ACPI: AC Adapter [C1AB] (on-line) [ 0.315632] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.315637] ACPI: Sleep Button [C20B] [ 0.315684] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.315743] ACPI: Lid Switch [C20C] [ 0.315793] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.315795] ACPI: Power Button [PWRF] [ 0.315990] fan PNP0C0B:00: registered as cooling_device0 [ 0.315996] ACPI: Fan [C2F2] (off) [ 0.316149] fan PNP0C0B:01: registered as cooling_device1 [ 0.316155] ACPI: Fan [C2F3] (off) [ 0.316308] fan PNP0C0B:02: registered as cooling_device2 [ 0.316313] ACPI: Fan [C2F4] (off) [ 0.316466] fan PNP0C0B:03: registered as cooling_device3 [ 0.316471] ACPI: Fan [C2F5] (off) [ 0.317065] ACPI: SSDT 5f7f4852 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.317587] ACPI: SSDT 5f7f4b14 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.319989] Marking TSC unstable due to TSC halts in idle [ 0.320083] processor LNXCPU:00: registered as cooling_device4 [ 0.320443] ACPI: SSDT 5f7f478a 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.320800] ACPI: SSDT 5f7f4a8f 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.321310] Switching to clocksource hpet [ 0.321977] processor LNXCPU:01: registered as cooling_device5 [ 0.353430] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.353443] ACPI: Thermal Zone [TZ0] (70 C) [ 0.368225] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.368237] ACPI: Thermal Zone [TZ1] (74 C) [ 0.382424] Freeing initrd memory: 7781k freed [ 0.382454] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.382466] ACPI: Thermal Zone [TZ2] (53 C) [ 0.392800] thermal LNXTHERM:04: registered as thermal_zone3 [ 0.392812] ACPI: Thermal Zone [TZ3] (32 C) [ 0.396523] thermal LNXTHERM:05: registered as thermal_zone4 [ 0.396531] ACPI: Thermal Zone [TZ4] (50 C) [ 0.397297] isapnp: Scanning for PnP cards... [ 0.398267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.399682] brd: module loaded [ 0.400179] loop: module loaded [ 0.400264] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.400365] ata_piix 0000:00:1f.1: version 2.13 [ 0.400381] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.400424] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.400519] scsi0 : ata_piix [ 0.400598] scsi1 : ata_piix [ 0.401081] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3040 irq 14 [ 0.401084] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3048 irq 15 [ 0.401435] Fixed MDIO Bus: probed [ 0.401472] PPP generic driver version 2.4.2 [ 0.401513] tun: Universal TUN/TAP device driver, 1.6 [ 0.401515] tun: (C) 1999-2004 Max Krasnyansky [ 0.401604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.401624] alloc irq_desc for 20 on node -1 [ 0.401626] alloc kstat_irqs on node -1 [ 0.401633] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.401645] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.401650] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.401687] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.401711] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.401724] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.405619] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.405656] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0584000 [ 0.409768] ata2: port disabled. ignoring. [ 0.421017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.421108] usb usb1: configuration #1 chosen from 1 choice [ 0.421139] hub 1-0:1.0: USB hub found [ 0.421147] hub 1-0:1.0: 8 ports detected [ 0.421220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.421235] uhci_hcd: USB Universal Host Controller Interface driver [ 0.421259] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.421266] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.421270] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.421300] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.421328] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003020 [ 0.421420] usb usb2: configuration #1 chosen from 1 choice [ 0.421448] hub 2-0:1.0: USB hub found [ 0.421455] hub 2-0:1.0: 2 ports detected [ 0.421549] PNP: PS/2 Controller [PNP0303:C1FB,PNP0f13:C1FC] at 0x60,0x64 irq 1,12 [ 0.423120] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.423874] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.423881] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.423884] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.423887] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.423890] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.423962] mice: PS/2 mouse device common for all mice [ 0.424089] rtc_cmos 00:05: RTC can wake from S4 [ 0.424126] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.424158] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.424264] device-mapper: uevent: version 1.0.3 [ 0.424875] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.424963] device-mapper: multipath: version 1.1.0 loaded [ 0.424966] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.425090] EISA: Probing bus 0 at eisa.0 [ 0.425097] Cannot allocate resource for EISA slot 1 [ 0.425099] Cannot allocate resource for EISA slot 2 [ 0.425101] Cannot allocate resource for EISA slot 3 [ 0.425104] Cannot allocate resource for EISA slot 4 [ 0.425106] Cannot allocate resource for EISA slot 5 [ 0.425120] EISA: Detected 0 cards. [ 0.425252] cpuidle: using governor ladder [ 0.425346] cpuidle: using governor menu [ 0.425791] TCP cubic registered [ 0.425956] NET: Registered protocol family 10 [ 0.426418] lo: Disabled Privacy Extensions [ 0.426745] NET: Registered protocol family 17 [ 0.427203] Using IPI No-Shortcut mode [ 0.427278] PM: Resume from disk failed. [ 0.427291] registered taskstats version 1 [ 0.427664] Magic number: 10:415:780 [ 0.427756] rtc_cmos 00:05: setting system clock to 2010-05-15 10:45:27 UTC (1273920327) [ 0.427759] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.427761] EDD information not available. [ 0.446872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.448294] ACPI: Battery Slot [C1AC] (battery present) [ 0.573422] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JC07, max MWDMA2 [ 0.589297] ata1.00: configured for MWDMA2 [ 0.733025] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.751545] isapnp: No Plug & Play device found [ 0.755257] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JC07 PQ: 0 ANSI: 5 [ 0.766705] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.766713] Uniform CD-ROM driver Revision: 3.20 [ 0.766880] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.766980] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.767095] Freeing unused kernel memory: 656k freed [ 0.767499] Write protecting the kernel text: 4676k [ 0.767548] Write protecting the kernel read-only data: 1840k [ 0.782788] udev: starting version 151 [ 0.867571] usb 1-1: configuration #1 chosen from 1 choice [ 0.888627] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.888630] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.888677] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.894738] ahci 0000:00:1f.2: version 3.0 [ 0.894756] alloc irq_desc for 21 on node -1 [ 0.894759] alloc kstat_irqs on node -1 [ 0.894768] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.894809] alloc irq_desc for 26 on node -1 [ 0.894811] alloc kstat_irqs on node -1 [ 0.894824] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X [ 0.894873] ahci: SSS flag set, parallel bus scan disabled [ 0.894906] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 0.894909] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 0.894915] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.895044] scsi2 : ahci [ 0.895301] scsi3 : ahci [ 0.895404] scsi4 : ahci [ 0.895507] scsi5 : ahci [ 0.895605] ata3: SATA max UDMA/133 abar m1024@0xf0585000 port 0xf0585100 irq 26 [ 0.895608] ata4: DUMMY [ 0.895609] ata5: DUMMY [ 0.895611] ata6: DUMMY [ 0.902475] Initializing USB Mass Storage driver... [ 0.902569] scsi6 : SCSI emulation for USB Mass Storage devices [ 0.902694] usbcore: registered new interface driver usb-storage [ 0.902697] USB Mass Storage support registered. [ 0.902778] usb-storage: device found at 2 [ 0.902780] usb-storage: waiting for device to settle before scanning [ 0.915076] e100 0000:02:08.0: PME# disabled [ 0.915697] e100: eth0: e100_probe: addr 0xf0101000, irq 20, MAC addr 00:1e:ec:1c:bf:40 [ 0.980057] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.113629] usb 1-2: configuration #1 chosen from 1 choice [ 1.114093] hub 1-2:1.0: USB hub found [ 1.114349] hub 1-2:1.0: 4 ports detected [ 1.376056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.378582] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.378587] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.378664] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.378673] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.388369] usb 1-2.1: new low speed USB device using ehci_hcd and address 4 [ 1.418412] ata3.00: ATA-8: TOSHIBA MK3252GSX, LV010A, max UDMA/100 [ 1.418419] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.420963] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.420967] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.421052] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.421060] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.421945] ata3.00: configured for UDMA/100 [ 1.437969] ata3.00: configured for UDMA/100 [ 1.437976] ata3: EH complete [ 1.438151] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 1.438302] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.438431] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.438480] sd 2:0:0:0: [sda] Write Protect is off [ 1.438483] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.438509] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.438650] sda: [ 1.486112] usb 1-2.1: configuration #1 chosen from 1 choice [ 1.490261] sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 [ 1.541811] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.546529] usbcore: registered new interface driver hiddev [ 1.552199] input: MLK Defender 2.4GHz Nano mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input5 [ 1.552373] generic-usb 0003:04FC:05DA.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz Nano mouse] on usb-0000:00:1d.7-2.1/input0 [ 1.552404] usbcore: registered new interface driver usbhid [ 1.552407] usbhid: v2.6:USB HID core driver [ 1.560362] usb 1-2.3: new low speed USB device using ehci_hcd and address 5 [ 1.670830] usb 1-2.3: configuration #1 chosen from 1 choice [ 1.681276] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.3/1-2.3:1.0/input/input6 [ 1.681383] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.7-2.3/input0 [ 1.698419] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.3/1-2.3:1.1/input/input7 [ 1.698763] generic-usb 0003:04D9:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.7-2.3/input1 [ 2.193087] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 5.900351] usb-storage: device scan complete [ 5.904808] scsi 6:0:0:0: Direct-Access WDC WD25 00BEVT-00ZCT0 PQ: 0 ANSI: 2 [ 5.905645] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 5.906510] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 5.908756] sd 6:0:0:0: [sdb] Write Protect is off [ 5.908763] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 5.908769] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 5.912008] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 5.912015] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 8.163138] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.163145] sd 6:0:0:0: [sdb] Attached SCSI disk [ 11.239548] Adding 2048248k swap on /dev/sda1. Priority:-1 extents:1 across:2048248k [ 11.245543] udev: starting version 151 [ 11.438235] Linux agpgart interface v0.103 [ 11.474593] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 11.474662] [Firmware Bug]: _BCQ is used instead of _BQC [ 11.475701] acpi device:01: registered as cooling_device6 [ 11.475930] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 11.475989] ACPI: Video Device [C085] (multi-head: yes rom: no post: no) [ 11.482059] cfg80211: Calling CRDA to update world regulatory domain [ 11.483579] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 11.484122] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 11.499113] lp: driver loaded but no devices found [ 11.508398] intel_rng: FWH not detected [ 11.508830] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 11.543406] cfg80211: World regulatory domain updated: [ 11.543425] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.543429] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.543432] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.543434] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.543437] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.543440] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.563879] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30d5] [ 11.563907] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI [ 11.563909] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 11.563916] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01be1b32, devctl 0x44 [ 11.570065] [drm] Initialized drm 1.1.0 20060810 [ 11.617867] type=1505 audit(1273920338.688:2): operation="profile_load" pid=622 name="/sbin/dhclient3" [ 11.618441] type=1505 audit(1273920338.688:3): operation="profile_load" pid=622 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.618751] type=1505 audit(1273920338.688:4): operation="profile_load" pid=622 name="/usr/lib/connman/scripts/dhclient-script" [ 11.647345] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.647352] i915 0000:00:02.0: setting latency timer to 64 [ 11.657226] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 11.657230] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 11.657305] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.657320] iwl3945 0000:10:00.0: setting latency timer to 64 [ 11.663818] [drm] set up 7M of stolen space [ 11.772120] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 11.772139] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 11.772290] alloc irq_desc for 27 on node -1 [ 11.772293] alloc kstat_irqs on node -1 [ 11.772326] iwl3945 0000:10:00.0: irq 27 for MSI/MSI-X [ 11.784275] [drm] initialized overlay support [ 11.820310] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 11.912816] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18 [ 11.912822] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 11.912826] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 11.912838] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 11.912842] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean. [ 11.913065] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf03fffff [ 11.913069] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 11.967725] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 [ 12.010463] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 12.204221] fb0: inteldrmfb frame buffer device [ 12.204225] registered panic notifier [ 12.204233] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 12.204341] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 12.204353] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.204375] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.207013] vga16fb: initializing [ 12.207018] vga16fb: mapped to 0xc00a0000 [ 12.207021] vga16fb: not registering due to another framebuffer present [ 12.514380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 12.516396] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 12.517240] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 12.517920] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 12.518772] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 12.525692] Console: switching to colour frame buffer device 160x50 [ 13.534094] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 13.629642] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 14.082243] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 14.083569] ISO 9660 Extensions: RRIP_1991A [ 14.163236] type=1505 audit(1273920341.232:5): operation="profile_load" pid=955 name="/usr/share/gdm/guest-session/Xsession" [ 14.164859] type=1505 audit(1273920341.236:6): operation="profile_replace" pid=956 name="/sbin/dhclient3" [ 14.165175] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.165667] type=1505 audit(1273920341.236:7): operation="profile_replace" pid=956 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.165988] type=1505 audit(1273920341.236:8): operation="profile_replace" pid=956 name="/usr/lib/connman/scripts/dhclient-script" [ 14.168160] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 14.169721] type=1505 audit(1273920341.240:9): operation="profile_load" pid=957 name="/usr/bin/evince" [ 14.176402] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.177220] type=1505 audit(1273920341.248:10): operation="profile_load" pid=957 name="/usr/bin/evince-previewer" [ 14.181871] type=1505 audit(1273920341.252:11): operation="profile_load" pid=957 name="/usr/bin/evince-thumbnailer" [ 14.542505] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 14.542509] vboxdrv: Successfully done. [ 14.542511] vboxdrv: Found 2 processor cores. [ 14.543066] vboxdrv: fAsync=0 offMin=0x326 offMax=0x1207 [ 14.543554] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 14.543557] vboxdrv: Successfully loaded version 3.1.8 (interface 0x00100001). [ 14.884092] ppdev: user-space parallel port driver [ 22.342659] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 22.907570] EXT4-fs (sdb7): mounted filesystem with ordered data mode [ 24.184023] eth0: no IPv6 routers present [ 39.905361] PM: Syncing filesystems ... done. [ 40.076052] PM: Preparing system for mem sleep [ 40.076059] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 40.077046] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 40.077162] PM: Entering mem sleep [ 40.077173] Suspending console(s) (use no_console_suspend to debug) [ 40.140066] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 40.140192] sd 2:0:0:0: [sda] Stopping disk [ 40.656790] PM: suspend of drv:sd dev:2:0:0:0 complete after 516.725 msecs [ 40.836052] PM: suspend of drv:atkbd dev:serio0 complete after 107.429 msecs [ 40.837394] ACPI handle has no context! [ 40.837575] e100 0000:02:08.0: PCI INT A disabled [ 40.837582] e100 0000:02:08.0: PME# enabled [ 40.837587] e100 0000:02:08.0: wake-up capability enabled by ACPI [ 40.900149] ata2: port disabled. ignoring. [ 40.900244] ata_piix 0000:00:1f.1: PCI INT A disabled [ 40.900266] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 40.900280] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 41.004410] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 41.025171] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [ 41.025182] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 124.883 msecs [ 41.065653] i915 0000:00:02.0: PCI INT A disabled [ 41.086639] PM: suspend of devices complete after 1009.141 msecs [ 41.086642] PM: suspend devices took 1.008 seconds [ 41.100180] PM: late suspend of devices complete after 13.532 msecs [ 41.100442] ACPI: Preparing to enter system sleep state S3 [ 41.116010] Disabling non-boot CPUs ... [ 41.116033] CPU0 attaching NULL sched-domain. [ 41.116036] CPU1 attaching NULL sched-domain. [ 41.180013] CPU0 attaching NULL sched-domain. [ 41.181133] Breaking affinity for irq 9 [ 41.181153] Breaking affinity for irq 16 [ 41.181162] Breaking affinity for irq 20 [ 41.284026] CPU 1 is now offline [ 41.284030] SMP alternatives: switching to UP code [ 41.288923] Extended CMOS year: 2000 [ 41.288923] Back to C! [ 41.288923] CPU0: Thermal monitoring handled by SMI [ 41.288923] Extended CMOS year: 2000 [ 41.288923] Enabling non-boot CPUs ... [ 41.288923] SMP alternatives: switching to SMP code [ 41.293519] Booting processor 1 APIC 0x1 ip 0x6000 [ 41.288465] Initializing CPU#1 [ 41.288465] CPU: L1 I cache: 32K, L1 D cache: 32K [ 41.288465] CPU: L2 cache: 2048K [ 41.288465] CPU: Physical Processor ID: 0 [ 41.288465] CPU: Processor Core ID: 1 [ 41.288465] CPU1: Thermal monitoring handled by SMI [ 41.384062] CPU1: Intel(R) Core(TM) Duo CPU T2600 @ 2.16GHz stepping 0c [ 41.384174] CPU0 attaching NULL sched-domain. [ 41.412016] CPU0 attaching sched-domain: [ 41.412019] domain 0: span 0-1 level MC [ 41.412021] groups: 0 1 [ 41.412025] CPU1 attaching sched-domain: [ 41.412027] domain 0: span 0-1 level MC [ 41.412029] groups: 1 0 [ 41.412461] CPU1 is up [ 41.412871] ACPI: Waking up from system sleep state S3 [ 41.548286] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 41.548315] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000) [ 41.548320] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 41.548345] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 41.548366] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 41.548373] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 41.548407] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a) [ 41.548419] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x64316421) [ 41.548424] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x64106400) [ 41.548430] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 41.548439] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 41.548446] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 41.548495] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a) [ 41.548507] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x64516441) [ 41.548513] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000) [ 41.548518] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) [ 41.548528] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 41.548534] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 41.548572] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 41.548586] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021) [ 41.548600] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 41.548622] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 41.548641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000) [ 41.548650] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 41.548682] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x63f16001) [ 41.548688] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010) [ 41.548693] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020) [ 41.548706] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107) [ 41.548770] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 41.548784] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041) [ 41.548797] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 41.548827] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000) [ 41.548832] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071) [ 41.548846] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 41.548940] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 41.549008] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [ 41.549022] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 41.549041] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 41.549165] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [ 41.549171] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc) [ 41.549177] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800) [ 41.549183] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc) [ 41.549190] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400) [ 41.549196] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x6bfff000) [ 41.549202] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x68000000) [ 41.549208] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x63fff000) [ 41.549214] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x60000000) [ 41.549221] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 41.549229] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000) [ 41.549235] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [ 41.549243] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 41.549424] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105) [ 41.549442] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001) [ 41.549447] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000) [ 41.549453] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [ 41.549459] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) [ 41.549860] PM: early resume of devices complete after 1.707 msecs [ 41.668748] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.668753] i915 0000:00:02.0: setting latency timer to 64 [ 41.764195] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.764206] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 41.764246] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 41.764256] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 41.764289] usb usb2: root hub lost power or was reset [ 41.764316] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 41.764326] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 41.764345] pci 0000:00:1e.0: setting latency timer to 64 [ 41.764364] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.764373] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 41.765675] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object (20090903/exoparg2-445) [ 41.765683] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7017510), AE_AML_PACKAGE_LIMIT [ 41.765709] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f701a378), AE_AML_PACKAGE_LIMIT [ 41.765739] ata1: ACPI set timing mode failed (status=0x300b) [ 41.766271] ata2: port disabled. ignoring. [ 41.766288] ahci 0000:00:1f.2: setting latency timer to 64 [ 41.904045] PM: resume of drv:yenta_cardbus dev:0000:02:06.0 complete after 137.670 msecs [ 41.904064] e100 0000:02:08.0: wake-up capability disabled by ACPI [ 41.904072] e100 0000:02:08.0: PME# disabled [ 42.016432] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 42.016436] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [ 42.029499] sd 2:0:0:0: [sda] Starting disk [ 42.032386] ata1.00: configured for MWDMA2 [ 43.536054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 43.538509] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 43.538513] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 43.538607] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 43.538614] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 43.541995] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 43.541999] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 43.542060] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 43.542068] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 43.542940] ata3.00: configured for UDMA/100 [ 43.557968] ata3.00: configured for UDMA/100 [ 43.557974] ata3: EH complete [ 43.564913] PM: resume of drv:sd dev:2:0:0:0 complete after 1535.415 msecs [ 43.662759] PM: resume of devices complete after 2112.846 msecs [ 43.662949] PM: resume devices took 2.112 seconds [ 43.662981] PM: Finishing wakeup. [ 43.662982] Restarting tasks ... done. [ 44.321176] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 46.816174] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 46.816514] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 52.537360] PM: Syncing filesystems ... done. [ 52.685044] PM: Preparing system for mem sleep [ 52.685052] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 52.686140] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 52.686258] PM: Entering mem sleep [ 52.686270] Suspending console(s) (use no_console_suspend to debug) [ 52.764066] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 52.764188] sd 2:0:0:0: [sda] Stopping disk [ 53.262551] PM: suspend of drv:sd dev:2:0:0:0 complete after 498.486 msecs [ 53.440046] PM: suspend of drv:atkbd dev:serio0 complete after 107.523 msecs [ 53.441388] ACPI handle has no context! [ 53.441569] e100 0000:02:08.0: PME# enabled [ 53.441575] e100 0000:02:08.0: wake-up capability enabled by ACPI [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.460024] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [ 53.693362] iwl3945 0000:10:00.0: Hardware error detected. Restarting. [ 53.708093] PM: suspend of drv:iwl3945 dev:0000:10:00.0 complete after 252.033 msecs [ 53.740159] ata2: port disabled. ignoring. [ 53.740237] ata_piix 0000:00:1f.1: PCI INT A disabled [ 53.740259] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 53.740272] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 53.740302] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 53.760980] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [ 53.778573] i915 0000:00:02.0: PCI INT A disabled [ 53.801412] PM: suspend of devices complete after 1114.813 msecs [ 53.801415] PM: suspend devices took 1.116 seconds [ 53.816345] PM: late suspend of devices complete after 14.925 msecs [ 53.816593] ACPI: Preparing to enter system sleep state S3 [ 53.844011] Disabling non-boot CPUs ... [ 53.844033] CPU0 attaching NULL sched-domain. [ 53.844036] CPU1 attaching NULL sched-domain. [ 53.908015] CPU0 attaching NULL sched-domain. [ 54.012027] CPU 1 is now offline [ 54.012030] SMP alternatives: switching to UP code [ 54.016734] Extended CMOS year: 2000 [ 54.016734] Back to C! [ 54.016734] CPU0: Thermal monitoring handled by SMI [ 54.016734] Extended CMOS year: 2000 [ 54.016734] Enabling non-boot CPUs ... [ 54.016734] SMP alternatives: switching to SMP code [ 54.021343] Booting processor 1 APIC 0x1 ip 0x6000 [ 54.016327] Initializing CPU#1 [ 54.016327] CPU: L1 I cache: 32K, L1 D cache: 32K [ 54.016327] CPU: L2 cache: 2048K [ 54.016327] CPU: Physical Processor ID: 0 [ 54.016327] CPU: Processor Core ID: 1 [ 54.016327] CPU1: Thermal monitoring handled by SMI [ 54.112035] CPU1: Intel(R) Core(TM) Duo CPU T2600 @ 2.16GHz stepping 0c [ 54.112149] CPU0 attaching NULL sched-domain. [ 54.140018] CPU0 attaching sched-domain: [ 54.140021] domain 0: span 0-1 level MC [ 54.140023] groups: 0 1 [ 54.140027] CPU1 attaching sched-domain: [ 54.140029] domain 0: span 0-1 level MC [ 54.140031] groups: 1 0 [ 54.140469] CPU1 is up [ 54.140878] ACPI: Waking up from system sleep state S3 [ 54.276287] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 54.276317] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000) [ 54.276322] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 54.276346] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 54.276366] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 54.276373] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 54.276406] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a) [ 54.276419] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x64316421) [ 54.276424] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x64106400) [ 54.276429] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) [ 54.276439] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 54.276446] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 54.276495] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020a) [ 54.276507] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x64516441) [ 54.276513] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf000f000) [ 54.276518] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) [ 54.276528] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 54.276534] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 54.276572] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 54.276586] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3021) [ 54.276600] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 54.276621] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 54.276641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xf0584000) [ 54.276649] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 54.276681] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x63f16001) [ 54.276686] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f010) [ 54.276692] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22802020) [ 54.276704] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107) [ 54.276768] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 54.276781] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x3041) [ 54.276795] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 54.276823] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xf0585000) [ 54.276829] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x3071) [ 54.276842] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 54.276936] iwl3945 0000:10:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 54.277003] iwl3945 0000:10:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [ 54.277018] iwl3945 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 54.277036] iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 54.277160] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b) [ 54.277166] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x28fc) [ 54.277172] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x2800) [ 54.277178] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x24fc) [ 54.277184] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x2400) [ 54.277191] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x6bfff000) [ 54.277197] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x68000000) [ 54.277203] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x63fff000) [ 54.277209] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x60000000) [ 54.277216] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 54.277224] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0100000) [ 54.277230] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [ 54.277238] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 54.277418] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x38080105) [ 54.277436] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001) [ 54.277441] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0101000) [ 54.277447] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [ 54.277453] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007) [ 54.277850] PM: early resume of devices complete after 1.695 msecs [ 54.396845] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 54.396850] i915 0000:00:02.0: setting latency timer to 64 [ 54.492209] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 54.492221] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 54.492260] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 54.492270] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 54.492302] usb usb2: root hub lost power or was reset [ 54.492329] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 54.492339] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 54.492381] pci 0000:00:1e.0: setting latency timer to 64 [ 54.492409] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 54.492413] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 54.493662] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object (20090903/exoparg2-445) [ 54.493670] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C20E] (Node f7017510), AE_AML_PACKAGE_LIMIT [ 54.493695] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DD.C318._STM] (Node f701a378), AE_AML_PACKAGE_LIMIT [ 54.493724] ata1: ACPI set timing mode failed (status=0x300b) [ 54.494254] ata2: port disabled. ignoring. [ 54.494271] ahci 0000:00:1f.2: setting latency timer to 64 [ 54.632049] PM: resume of drv:yenta_cardbus dev:0000:02:06.0 complete after 137.690 msecs [ 54.632067] e100 0000:02:08.0: wake-up capability disabled by ACPI [ 54.632076] e100 0000:02:08.0: PME# disabled [ 54.744449] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 54.744453] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [ 54.760378] ata1.00: configured for MWDMA2 [ 56.320052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 56.322526] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 56.322530] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.322598] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 56.322605] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 56.325875] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 56.325879] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 56.325940] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 56.325947] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 56.326825] ata3.00: configured for UDMA/100 [ 56.341927] ata3.00: configured for UDMA/100 [ 56.341933] ata3: EH complete [ 59.820047] usb 1-1: reset high speed USB device using ehci_hcd and address 2 [ 59.953799] PM: resume of drv:usb dev:1-1 complete after 5292.072 msecs [ 59.955320] sd 2:0:0:0: [sda] Starting disk [ 60.018436] PM: resume of devices complete after 5740.532 msecs [ 60.018624] PM: resume devices took 5.740 seconds [ 60.018659] PM: Finishing wakeup. [ 60.018660] Restarting tasks ... done. [ 60.198208] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 60.200160] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 60.352548] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 70.964032] eth0: no IPv6 routers present [ 104.056383] usb 1-1: USB disconnect, address 2