[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5cf0c82e-0b3b-45db-be26-5645e15482ce ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000 [ 0.000000] RAMDISK: 377fd000 - 37fef14c [ 0.000000] ACPI: RSDP 00000000000f7da0 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000dfeeb080 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000dfee3280 07DAC (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: SSDT 00000000dfeeb2c0 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000dfeeb5c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000dfeeb640 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000dfeeb1c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003dfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377fd000 - 0037fef14c] RAMDISK ==> [00377fd000 - 0037fef14c] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a15d] BRK ==> [0001a2a000 - 0001a2a15d] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f6000] f6000 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 105 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031942 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5cf0c82e-0b3b-45db-be26-5645e15482ce ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4048500k/4718592k available (5409k kernel code, 525892k absent, 144200k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2612.304 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.60 BogoMIPS (lpj=26123040) [ 0.010028] Security Framework initialized [ 0.010043] AppArmor: AppArmor initialized [ 0.010339] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011878] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012720] Mount-cache hash table entries: 256 [ 0.012838] Initializing cgroup subsys ns [ 0.012841] Initializing cgroup subsys cpuacct [ 0.012845] Initializing cgroup subsys memory [ 0.012851] Initializing cgroup subsys devices [ 0.012853] Initializing cgroup subsys freezer [ 0.012855] Initializing cgroup subsys net_cls [ 0.012871] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012873] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.012875] CPU 0/0x0 -> Node 0 [ 0.012877] tseg: 00dff00000 [ 0.012878] CPU: Physical Processor ID: 0 [ 0.012880] CPU: Processor Core ID: 0 [ 0.012882] mce: CPU supports 5 MCE banks [ 0.012891] using C1E aware idle routine [ 0.012892] Performance Events: AMD PMU driver. [ 0.012896] ... version: 0 [ 0.012898] ... bit width: 48 [ 0.012899] ... generic registers: 4 [ 0.012900] ... value mask: 0000ffffffffffff [ 0.012902] ... max period: 00007fffffffffff [ 0.012903] ... fixed-purpose events: 0 [ 0.012905] ... event mask: 000000000000000f [ 0.014260] ACPI: Core revision 20090903 [ 0.030026] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030035] ftrace: allocating 22518 entries in 89 pages [ 0.035176] Setting APIC routing to flat [ 0.035943] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137247] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] System has AMD C1E enabled [ 0.020000] Switch to broadcast mode on CPU1 [ 0.290071] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.290087] Brought up 2 CPUs [ 0.290089] Total of 2 processors activated (10448.67 BogoMIPS). [ 0.290360] CPU0 attaching sched-domain: [ 0.290362] domain 0: span 0-1 level MC [ 0.290364] groups: 0 1 [ 0.290369] CPU1 attaching sched-domain: [ 0.290370] domain 0: span 0-1 level MC [ 0.290372] groups: 1 0 [ 0.290441] Switch to broadcast mode on CPU0 [ 0.290441] devtmpfs: initialized [ 0.290441] regulator: core version 0.5 [ 0.290441] Time: 5:40:37 Date: 04/26/10 [ 0.290441] NET: Registered protocol family 16 [ 0.290441] Trying to unpack rootfs image as initramfs... [ 0.290441] node 0 link 0: io port [b000, ffff] [ 0.290441] TOM: 00000000e0000000 aka 3584M [ 0.290441] node 0 link 0: mmio [a0000, bffff] [ 0.290441] node 0 link 0: mmio [e0000000, efffffff] [ 0.290441] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.290441] node 0 link 0: mmio [f0000000, f03fffff] [ 0.290441] TOM2: 0000000120000000 aka 4608M [ 0.290441] bus: [00,03] on node 0 link 0 [ 0.290441] bus: 00 index 0 io port: [0, ffff] [ 0.290441] bus: 00 index 1 mmio: [a0000, bffff] [ 0.290441] bus: 00 index 2 mmio: [e0000000, f3ffffff] [ 0.290441] bus: 00 index 3 mmio: [f4000000, ffffffff] [ 0.290441] bus: 00 index 4 mmio: [120000000, fcffffffff] [ 0.290441] ACPI: bus type pci registered [ 0.290441] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.290441] PCI: MCFG area at f0000000 reserved in E820 [ 0.292424] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.292426] PCI: Using configuration type 1 for base access [ 0.300088] bio: create slab at 0 [ 0.300899] ACPI: EC: Look up EC in DSDT [ 0.310294] ACPI: Interpreter enabled [ 0.310300] ACPI: (supports S0 S1 S3 S4 S5) [ 0.310325] ACPI: Using IOAPIC for interrupt routing [ 0.319748] ACPI: No dock devices found. [ 0.319851] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.320297] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320300] pci 0000:00:04.0: PME# disabled [ 0.320636] pci 0000:00:09.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.320644] pci 0000:00:09.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.320678] pci 0000:00:09.1: PME# supported from D3hot D3cold [ 0.320685] pci 0000:00:09.1: PME# disabled [ 0.320735] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.320788] pci 0000:00:0a.0: supports D1 D2 [ 0.320790] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320794] pci 0000:00:0a.0: PME# disabled [ 0.320838] pci 0000:00:0a.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.320896] pci 0000:00:0a.1: supports D1 D2 [ 0.320898] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320902] pci 0000:00:0a.1: PME# disabled [ 0.320971] pci 0000:00:0c.0: reg 20 io port: [0xfd00-0xfd0f] [ 0.321050] pci 0000:00:0d.0: reg 10 io port: [0x9f0-0x9f7] [ 0.321057] pci 0000:00:0d.0: reg 14 io port: [0xbf0-0xbf3] [ 0.321064] pci 0000:00:0d.0: reg 18 io port: [0x970-0x977] [ 0.321071] pci 0000:00:0d.0: reg 1c io port: [0xb70-0xb73] [ 0.321078] pci 0000:00:0d.0: reg 20 io port: [0xf800-0xf80f] [ 0.321085] pci 0000:00:0d.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.321175] pci 0000:00:0d.1: reg 10 io port: [0x9e0-0x9e7] [ 0.321182] pci 0000:00:0d.1: reg 14 io port: [0xbe0-0xbe3] [ 0.321189] pci 0000:00:0d.1: reg 18 io port: [0x960-0x967] [ 0.321196] pci 0000:00:0d.1: reg 1c io port: [0xb60-0xb63] [ 0.321203] pci 0000:00:0d.1: reg 20 io port: [0xf300-0xf30f] [ 0.321210] pci 0000:00:0d.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.321302] pci 0000:00:0d.2: reg 10 io port: [0xf200-0xf207] [ 0.321309] pci 0000:00:0d.2: reg 14 io port: [0xf100-0xf103] [ 0.321316] pci 0000:00:0d.2: reg 18 io port: [0xf000-0xf007] [ 0.321323] pci 0000:00:0d.2: reg 1c io port: [0xef00-0xef03] [ 0.321330] pci 0000:00:0d.2: reg 20 io port: [0xee00-0xee0f] [ 0.321337] pci 0000:00:0d.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.321536] pci 0000:00:10.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.321543] pci 0000:00:10.0: reg 14 io port: [0xed00-0xed07] [ 0.321550] pci 0000:00:10.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.321557] pci 0000:00:10.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f] [ 0.321611] pci 0000:00:10.0: supports D1 D2 [ 0.321613] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.321618] pci 0000:00:10.0: PME# disabled [ 0.321690] pci 0000:00:11.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff] [ 0.321697] pci 0000:00:11.0: reg 14 io port: [0xec00-0xec07] [ 0.321704] pci 0000:00:11.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff] [ 0.321711] pci 0000:00:11.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f] [ 0.321765] pci 0000:00:11.0: supports D1 D2 [ 0.321767] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.321772] pci 0000:00:11.0: PME# disabled [ 0.321889] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.321893] pci 0000:00:16.0: PME# disabled [ 0.322007] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.322016] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.322025] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.322031] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.322036] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfcfe0000-0xfcffffff] [ 0.322120] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff] [ 0.322123] pci 0000:00:04.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.322128] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.322180] pci 0000:02:07.0: reg 10 io port: [0xcc00-0xcc1f] [ 0.322238] pci 0000:02:07.0: supports D1 D2 [ 0.322277] pci 0000:02:07.1: reg 10 io port: [0xc800-0xc807] [ 0.322335] pci 0000:02:07.1: supports D1 D2 [ 0.322392] pci 0000:02:0b.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff] [ 0.322400] pci 0000:02:0b.0: reg 14 32bit mmio: [0xfdff8000-0xfdffbfff] [ 0.322454] pci 0000:02:0b.0: supports D1 D2 [ 0.322455] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.322460] pci 0000:02:0b.0: PME# disabled [ 0.322501] pci 0000:00:0e.0: transparent bridge [ 0.322505] pci 0000:00:0e.0: bridge io port: [0xc000-0xcfff] [ 0.322509] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.322584] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdeff000-0xfdeff07f] [ 0.322603] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdef8000-0xfdefbfff] [ 0.322613] pci 0000:03:00.0: reg 20 io port: [0xbc00-0xbc7f] [ 0.322632] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfde00000-0xfde7ffff] [ 0.322680] pci 0000:03:00.0: supports D1 D2 [ 0.322758] pci 0000:00:16.0: bridge io port: [0xb000-0xbfff] [ 0.322762] pci 0000:00:16.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.322786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.323121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.393783] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) [ 0.393953] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) [ 0.394120] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.394287] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.394459] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) [ 0.394627] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.394799] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.394966] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.395133] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.395301] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.395470] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.395640] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15) [ 0.395807] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.395975] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.396146] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.396315] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.396483] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.396652] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 0.396820] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 0.396988] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.397196] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.397399] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.397602] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.397806] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.398010] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.398212] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.398416] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.398619] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.398822] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.399030] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.399238] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.399442] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.399647] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.399854] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.400088] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.400295] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.400501] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.400707] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.400912] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.401117] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.401234] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.401238] vgaarb: loaded [ 0.401323] SCSI subsystem initialized [ 0.401398] libata version 3.00 loaded. [ 0.401457] usbcore: registered new interface driver usbfs [ 0.401466] usbcore: registered new interface driver hub [ 0.401489] usbcore: registered new device driver usb [ 0.401601] ACPI: WMI: Mapper loaded [ 0.401603] PCI: Using ACPI for IRQ routing [ 0.401783] NetLabel: Initializing [ 0.401785] NetLabel: domain hash size = 128 [ 0.401786] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.401797] NetLabel: unlabeled traffic allowed by default [ 0.401830] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.401833] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.420003] Switching to clocksource hpet [ 0.421458] AppArmor: AppArmor Filesystem Enabled [ 0.421474] pnp: PnP ACPI init [ 0.421489] ACPI: bus type pnp registered [ 0.426456] pnp: PnP ACPI: found 12 devices [ 0.426458] ACPI: ACPI bus type pnp unregistered [ 0.426469] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.426472] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.426474] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.426477] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.426479] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.426481] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.426486] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.426488] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.426490] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.426496] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.426501] system 00:0b: iomem range 0xce000-0xcffff has been reserved [ 0.426503] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.426505] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.426508] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.426510] system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.426513] system 00:0b: iomem range 0xdfee0000-0xdfefffff could not be reserved [ 0.426516] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.426518] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.426520] system 00:0b: iomem range 0x100000-0xdfedffff could not be reserved [ 0.426523] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.426526] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.426528] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.426531] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.426533] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.426536] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.431271] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.431274] pci 0000:00:04.0: IO window: 0xd000-0xdfff [ 0.431277] pci 0000:00:04.0: MEM window: 0xfa000000-0xfcffffff [ 0.431281] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.431286] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 0.431289] pci 0000:00:0e.0: IO window: 0xc000-0xcfff [ 0.431294] pci 0000:00:0e.0: MEM window: 0xfdf00000-0xfdffffff [ 0.431298] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.431305] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03 [ 0.431308] pci 0000:00:16.0: IO window: 0xb000-0xbfff [ 0.431313] pci 0000:00:16.0: MEM window: 0xfde00000-0xfdefffff [ 0.431317] pci 0000:00:16.0: PREFETCH window: disabled [ 0.431329] pci 0000:00:04.0: setting latency timer to 64 [ 0.431336] pci 0000:00:0e.0: setting latency timer to 64 [ 0.431346] pci 0000:00:16.0: setting latency timer to 64 [ 0.431350] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.431352] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.431355] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.431357] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.431359] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.431361] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.431363] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.431365] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.431367] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.431369] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 0.431371] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.431406] NET: Registered protocol family 2 [ 0.431567] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.432777] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.435787] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.436176] TCP: Hash tables configured (established 524288 bind 65536) [ 0.436178] TCP reno registered [ 0.436270] NET: Registered protocol family 1 [ 0.436340] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.459889] Freeing initrd memory: 8136k freed [ 0.460182] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.460273] pci 0000:00:0d.1: Enabling HT MSI Mapping [ 0.460361] pci 0000:00:0d.2: Enabling HT MSI Mapping [ 0.460449] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.460569] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.460705] pci 0000:00:11.0: Enabling HT MSI Mapping [ 0.460854] pci 0000:00:16.0: Enabling HT MSI Mapping [ 0.460879] pci 0000:01:00.0: Boot video device [ 0.461157] PCI-DMA: Disabling AGP. [ 0.461248] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.461250] PCI-DMA: using GART IOMMU. [ 0.461253] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.462035] Scanning for low memory corruption every 60 seconds [ 0.462177] audit: initializing netlink socket (disabled) [ 0.462192] type=2000 audit(1272260437.461:1): initialized [ 0.469609] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.470785] VFS: Disk quotas dquot_6.5.2 [ 0.470833] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.471400] fuse init (API version 7.13) [ 0.471465] msgmni has been set to 7923 [ 0.471731] alg: No test for stdrng (krng) [ 0.471781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.471784] io scheduler noop registered [ 0.471785] io scheduler anticipatory registered [ 0.471787] io scheduler deadline registered [ 0.471816] io scheduler cfq registered (default) [ 0.471989] alloc irq_desc for 24 on node 0 [ 0.471991] alloc kstat_irqs on node 0 [ 0.471999] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.472005] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.472195] alloc irq_desc for 25 on node 0 [ 0.472197] alloc kstat_irqs on node 0 [ 0.472205] pcieport 0000:00:16.0: irq 25 for MSI/MSI-X [ 0.472214] pcieport 0000:00:16.0: setting latency timer to 64 [ 0.472304] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.472322] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.472406] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.472409] ACPI: Power Button [PWRB] [ 0.472459] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.472461] ACPI: Power Button [PWRF] [ 0.472505] fan PNP0C0B:00: registered as cooling_device0 [ 0.472510] ACPI: Fan [FAN] (on) [ 0.472859] ACPI: processor limited to max C-state 1 [ 0.472874] processor LNXCPU:00: registered as cooling_device1 [ 0.472901] processor LNXCPU:01: registered as cooling_device2 [ 0.477813] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) [ 0.477820] ACPI: Expecting a [Reference] package element, found type 0 [ 0.477821] ACPI: Invalid passive threshold [ 0.478190] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.478197] ACPI: Thermal Zone [THRM] (40 C) [ 0.479274] Linux agpgart interface v0.103 [ 0.479299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.479433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.479722] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.480528] brd: module loaded [ 0.480876] loop: module loaded [ 0.480937] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.481141] pata_acpi 0000:00:0c.0: setting latency timer to 64 [ 0.481504] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.481508] alloc irq_desc for 23 on node 0 [ 0.481510] alloc kstat_irqs on node 0 [ 0.481522] pata_acpi 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.481538] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.481546] pata_acpi 0000:00:0d.0: PCI INT A disabled [ 0.481902] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.481904] alloc irq_desc for 22 on node 0 [ 0.481906] alloc kstat_irqs on node 0 [ 0.481915] pata_acpi 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.481934] pata_acpi 0000:00:0d.1: setting latency timer to 64 [ 0.481943] pata_acpi 0000:00:0d.1: PCI INT B disabled [ 0.482289] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.482292] alloc irq_desc for 21 on node 0 [ 0.482293] alloc kstat_irqs on node 0 [ 0.482302] pata_acpi 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.482318] pata_acpi 0000:00:0d.2: setting latency timer to 64 [ 0.482327] pata_acpi 0000:00:0d.2: PCI INT C disabled [ 0.482711] Fixed MDIO Bus: probed [ 0.482737] PPP generic driver version 2.4.2 [ 0.482763] tun: Universal TUN/TAP device driver, 1.6 [ 0.482764] tun: (C) 1999-2004 Max Krasnyansky [ 0.482834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.483194] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.483196] alloc irq_desc for 20 on node 0 [ 0.483197] alloc kstat_irqs on node 0 [ 0.483207] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.483232] ehci_hcd 0000:00:0a.1: setting latency timer to 64 [ 0.483235] ehci_hcd 0000:00:0a.1: EHCI Host Controller [ 0.483261] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 [ 0.483292] ehci_hcd 0000:00:0a.1: debug port 1 [ 0.483305] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported [ 0.483332] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 [ 0.510537] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 [ 0.510643] usb usb1: configuration #1 chosen from 1 choice [ 0.510666] hub 1-0:1.0: USB hub found [ 0.510673] hub 1-0:1.0: 10 ports detected [ 0.510758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.511128] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.511132] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.511151] ohci_hcd 0000:00:0a.0: setting latency timer to 64 [ 0.511154] ohci_hcd 0000:00:0a.0: OHCI Host Controller [ 0.511183] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 [ 0.511221] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000 [ 0.572632] usb usb2: configuration #1 chosen from 1 choice [ 0.572656] hub 2-0:1.0: USB hub found [ 0.572666] hub 2-0:1.0: 10 ports detected [ 0.572751] uhci_hcd: USB Universal Host Controller Interface driver [ 0.572814] PNP: No PS/2 controller found. Probing ports directly. [ 0.573297] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.573301] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.573362] mice: PS/2 mouse device common for all mice [ 0.573445] rtc_cmos 00:05: RTC can wake from S4 [ 0.573474] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.573525] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.573619] device-mapper: uevent: version 1.0.3 [ 0.573747] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.573855] device-mapper: multipath: version 1.1.0 loaded [ 0.573858] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.574078] cpuidle: using governor ladder [ 0.574079] cpuidle: using governor menu [ 0.574375] TCP cubic registered [ 0.574469] NET: Registered protocol family 10 [ 0.574837] lo: Disabled Privacy Extensions [ 0.575084] NET: Registered protocol family 17 [ 0.575110] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00) [ 0.575152] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa [ 0.575154] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xc [ 0.575156] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xe [ 0.575157] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x10 [ 0.575159] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 0.575161] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 0.575244] PM: Resume from disk failed. [ 0.575253] registered taskstats version 1 [ 0.575800] Magic number: 6:601:669 [ 0.575887] rtc_cmos 00:05: setting system clock to 2010-04-26 05:40:38 UTC (1272260438) [ 0.575890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.575891] EDD information not available. [ 0.575939] Freeing unused kernel memory: 876k freed [ 0.576244] Write protecting the kernel read-only data: 7680k [ 0.590243] udev: starting version 151 [ 0.651363] pata_amd 0000:00:0c.0: version 0.4.1 [ 0.651409] pata_amd 0000:00:0c.0: setting latency timer to 64 [ 0.668690] scsi0 : pata_amd [ 0.677396] sata_sil24 0000:03:00.0: version 1.1 [ 0.677754] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 0.677759] alloc irq_desc for 16 on node 0 [ 0.677761] alloc kstat_irqs on node 0 [ 0.677776] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 0.677879] sata_sil24 0000:03:00.0: setting latency timer to 64 [ 0.682974] scsi1 : pata_amd [ 0.683692] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14 [ 0.683694] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15 [ 0.688283] scsi2 : sata_sil24 [ 0.694218] scsi3 : sata_sil24 [ 0.694277] ata3: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16 [ 0.694282] ata4: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16 [ 0.696157] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.696485] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 0.696490] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.696495] forcedeth 0000:00:10.0: setting latency timer to 64 [ 0.696553] nv_probe: set workaround bit for reversed mac addr [ 0.882871] ata1.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100 [ 0.882874] ata1.00: 234441648 sectors, multi 1: LBA48 [ 0.884049] ata1.01: ATA-5: WDC WD1000BB-00CAA1, 17.07W17, max UDMA/100 [ 0.884052] ata1.01: 195371568 sectors, multi 1: LBA [ 0.884073] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x1f) [ 0.884077] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x1f) [ 0.922586] ata1.00: configured for UDMA/100 [ 0.940581] usb 1-9: new high speed USB device using ehci_hcd and address 4 [ 0.961873] ata1.01: configured for UDMA/100 [ 0.961985] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5 [ 0.962120] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.962247] scsi 0:0:1:0: Direct-Access ATA WDC WD1000BB-00C 17.0 PQ: 0 ANSI: 5 [ 0.962267] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 0.962324] sd 0:0:0:0: [sda] Write Protect is off [ 0.962326] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.962335] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.962346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.962406] ata2: port disabled. ignoring. [ 0.962471] sd 0:0:1:0: [sdb] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 0.962541] sd 0:0:1:0: [sdb] Write Protect is off [ 0.962543] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.962569] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.962586] sda: [ 0.976634] sdb: sda1 [ 0.985627] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.985648] sdb1 [ 0.985817] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.100846] usb 1-9: configuration #1 chosen from 1 choice [ 1.221332] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:4c:f4:88 [ 1.221336] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.221430] sata_nv 0000:00:0d.0: version 3.5 [ 1.221441] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.221443] sata_nv 0000:00:0d.0: Using SWNCQ mode [ 1.222042] sata_nv 0000:00:0d.0: setting latency timer to 64 [ 1.222181] scsi4 : sata_nv [ 1.222254] scsi5 : sata_nv [ 1.222426] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23 [ 1.222430] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23 [ 1.222843] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 [ 1.222847] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21 [ 1.222852] forcedeth 0000:00:11.0: setting latency timer to 64 [ 1.222897] nv_probe: set workaround bit for reversed mac addr [ 1.440573] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.669670] usb 2-1: configuration #1 chosen from 1 choice [ 1.710622] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.731601] ata5.00: ATA-8: ST31500541AS, CC34, max UDMA/133 [ 1.731605] ata5.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.751452] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:4d:9c:c8 [ 1.751456] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.751552] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.751554] sata_nv 0000:00:0d.1: Using SWNCQ mode [ 1.752161] sata_nv 0000:00:0d.1: setting latency timer to 64 [ 1.752320] scsi6 : sata_nv [ 1.752395] scsi7 : sata_nv [ 1.752561] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22 [ 1.752565] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22 [ 1.752681] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.752684] sata_nv 0000:00:0d.2: Using SWNCQ mode [ 1.753288] sata_nv 0000:00:0d.2: setting latency timer to 64 [ 1.753447] scsi8 : sata_nv [ 1.753521] scsi9 : sata_nv [ 1.753691] ata9: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21 [ 1.753694] ata10: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21 [ 1.772678] ata5.00: configured for UDMA/133 [ 2.010583] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 2.230048] CE: hpet increasing min_delta_ns to 15000 nsec [ 2.240618] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.240815] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.255126] usb 2-2: configuration #1 chosen from 1 choice [ 2.260474] ata9.00: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0Y, max UDMA/66 [ 2.262630] usbcore: registered new interface driver hiddev [ 2.270336] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input3 [ 2.270423] generic-usb 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0 [ 2.270510] usbcore: registered new interface driver usbhid [ 2.270512] usbhid: v2.6:USB HID core driver [ 2.280834] ata7.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.280837] ata7.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.283329] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input4 [ 2.283404] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:0a.0-2/input0 [ 2.300723] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.1/input/input5 [ 2.300834] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:0a.0-2/input1 [ 2.300951] ata9.00: configured for UDMA/66 [ 2.322616] ata7.00: configured for UDMA/133 [ 2.780592] ata3: SATA link down (SStatus 0 SControl 0) [ 4.870591] ata4: SATA link down (SStatus 0 SControl 0) [ 4.870718] scsi 4:0:0:0: Direct-Access ATA ST31500541AS CC34 PQ: 0 ANSI: 5 [ 4.870828] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.870912] sd 4:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 4.870949] sd 4:0:0:0: [sdc] Write Protect is off [ 4.870951] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.870970] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.871073] sdc: sdc1 sdc2 < sdc5 sdc6 > [ 4.900952] sd 4:0:0:0: [sdc] Attached SCSI disk [ 5.238655] EXT4-fs (sdc1): INFO: recovery required on readonly filesystem [ 5.238660] EXT4-fs (sdc1): write access will be enabled during recovery [ 5.360586] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.381280] ata6.00: ATA-7: SAMSUNG HD501LJ, CR100-06, max UDMA7 [ 5.381283] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.400827] ata6.00: configured for UDMA/133 [ 5.400896] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 5.401068] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.401105] sd 5:0:0:0: [sdd] Write Protect is off [ 5.401108] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.401127] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.401238] sdd: [ 5.401368] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 5.401643] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 5.401763] sd 6:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.401772] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 5.401797] sd 6:0:0:0: [sde] Write Protect is off [ 5.401800] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 5.401838] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.401971] sde: sdd1 [ 5.404195] sd 5:0:0:0: [sdd] Attached SCSI disk [ 5.430339] sde1 [ 5.430666] sd 6:0:0:0: [sde] Attached SCSI disk [ 5.676566] EXT4-fs (sdc1): orphan cleanup on readonly fs [ 5.676575] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133526 [ 5.690357] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133520 [ 5.690409] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133488 [ 5.690428] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133478 [ 5.690444] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133474 [ 5.690461] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133472 [ 5.690480] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133413 [ 5.690531] EXT4-fs (sdc1): ext4_orphan_cleanup: deleting unreferenced inode 133389 [ 5.690549] EXT4-fs (sdc1): 8 orphan inodes deleted [ 5.690551] EXT4-fs (sdc1): recovery complete [ 5.890170] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.892179] EXT4-fs (sdc1): mounted filesystem with ordered data mode [ 5.911613] ata8.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133 [ 5.911616] ata8.00: 398297088 sectors, multi 1: LBA48 [ 5.951596] ata8.00: configured for UDMA/133 [ 5.951695] scsi 7:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5 [ 5.951702] ata8.00: Disabling SWNCQ mode (depth 1) [ 5.951835] sd 7:0:0:0: [sdf] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 5.951840] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 5.951873] sd 7:0:0:0: [sdf] Write Protect is off [ 5.951876] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.951895] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.952024] sdf: [ 5.953626] scsi 8:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S BS0Y PQ: 0 ANSI: 5 [ 5.955553] sdf1 [ 5.955722] sd 7:0:0:0: [sdf] Attached SCSI disk [ 5.960598] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 5.960602] Uniform CD-ROM driver Revision: 3.20 [ 5.960713] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 5.960764] sr 8:0:0:0: Attached scsi generic sg6 type 5 [ 6.301718] ata10: SATA link down (SStatus 0 SControl 300) [ 6.964345] Adding 9764856k swap on /dev/sdc5. Priority:-1 extents:1 across:9764856k [ 7.047540] udev: starting version 151 [ 7.435500] type=1505 audit(1272260445.354:2): operation="profile_load" pid=573 name="/sbin/dhclient3" [ 7.435716] type=1505 audit(1272260445.354:3): operation="profile_load" pid=573 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.435836] type=1505 audit(1272260445.354:4): operation="profile_load" pid=573 name="/usr/lib/connman/scripts/dhclient-script" [ 7.843498] lp: driver loaded but no devices found [ 7.855105] parport_pc 00:09: reported by Plug and Play ACPI [ 7.855143] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 7.867727] ppdev: user-space parallel port driver [ 7.906636] cfg80211: Calling CRDA to update world regulatory domain [ 7.930776] lp0: using parport0 (interrupt-driven). [ 8.155935] cfg80211: World regulatory domain updated: [ 8.155938] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.155941] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.155943] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.155945] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.155947] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.155949] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.187948] EDAC MC: Ver: 2.1.0 Apr 16 2010 [ 8.192231] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010 [ 8.192792] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 8.192804] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.192805] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.192806] (Note that use of the override may cause unknown side effects.) [ 8.192824] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.203318] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 8.221010] gameport: EMU10K1 is pci0000:02:07.1/gameport0, io 0xc800, speed 641kHz [ 8.300801] ACPI: resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05] [ 8.300804] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.300807] nForce2_smbus 0000:00:09.1: Error probing SMB1. [ 8.300974] i2c i2c-0: nForce2 SMBus adapter at 0x1c40 [ 8.309574] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 8.309580] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 8.312123] vga16fb: initializing [ 8.312127] vga16fb: mapped to 0xffff8800000a0000 [ 8.312194] fb0: VGA16 VGA frame buffer device [ 8.360180] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.588210] nvidia: module license 'NVIDIA' taints kernel. [ 8.588214] Disabling lock debugging due to kernel taint [ 8.921145] phy0: Selected rate control algorithm 'minstrel' [ 8.921727] phy0: hwaddr 00:15:af:08:53:76, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 8.938098] rtl8187: Customer ID is 0x00 [ 8.938141] Registered led device: rtl8187-phy0::tx [ 8.938156] Registered led device: rtl8187-phy0::rx [ 8.939334] rtl8187: wireless switch is on [ 8.939363] usbcore: registered new interface driver rtl8187 [ 9.168104] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 9.168109] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 9.168116] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.168120] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.168855] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 9.495235] Console: switching to colour frame buffer device 80x30 [ 9.750852] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d6a7ca] [ 9.912534] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 9.912539] alloc irq_desc for 17 on node 0 [ 9.912541] alloc kstat_irqs on node 0 [ 9.912554] EMU10K1_Audigy 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 11.137666] EXT4-fs (sdc6): mounted filesystem with ordered data mode [ 11.335717] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 11.364800] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 11.441430] EXT4-fs (sdf1): mounted filesystem with ordered data mode [ 11.537957] EXT4-fs (sdd1): mounted filesystem with ordered data mode [ 11.634068] EXT4-fs (sde1): mounted filesystem with ordered data mode [ 12.753143] type=1505 audit(1272260450.674:5): operation="profile_load" pid=1167 name="/usr/share/gdm/guest-session/Xsession" [ 12.754585] type=1505 audit(1272260450.674:6): operation="profile_replace" pid=1168 name="/sbin/dhclient3" [ 12.754811] type=1505 audit(1272260450.674:7): operation="profile_replace" pid=1168 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.754938] type=1505 audit(1272260450.674:8): operation="profile_replace" pid=1168 name="/usr/lib/connman/scripts/dhclient-script" [ 12.803708] type=1505 audit(1272260450.724:9): operation="profile_load" pid=1169 name="/usr/bin/evince" [ 12.806436] type=1505 audit(1272260450.724:10): operation="profile_load" pid=1169 name="/usr/bin/evince-previewer" [ 12.808148] type=1505 audit(1272260450.724:11): operation="profile_load" pid=1169 name="/usr/bin/evince-thumbnailer" [ 12.833722] type=1505 audit(1272260450.754:12): operation="profile_load" pid=1173 name="/usr/lib/cups/backend/cups-pdf" [ 12.834000] type=1505 audit(1272260450.754:13): operation="profile_load" pid=1173 name="/usr/sbin/cupsd" [ 12.847689] type=1505 audit(1272260450.764:14): operation="profile_load" pid=1174 name="/usr/sbin/tcpdump"