[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009ff70000 (usable) [ 0.000000] BIOS-e820: 000000009ff70000 - 000000009ff72000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009ff72000 - 000000009ff93000 (ACPI data) [ 0.000000] BIOS-e820: 000000009ff93000 - 00000000a0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Dell Computer Corporation Dimension 4600i /0F4491, BIOS A07 11/06/2003 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x9ff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3677c000 - 373b6000 [ 0.000000] ACPI: RSDP 000feba0 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd1b8 00034 (v01 DELL 4600 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd1ec 00074 (v01 DELL 4600 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffceec1 024C9 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 9ff70000 00040 [ 0.000000] ACPI: SSDT fffd138a 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd260 0006C (v01 DELL 4600 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd2cc 00028 (v01 DELL 4600 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1671MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0009ff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0009ff70 [ 0.000000] On node 0 totalpages: 655104 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f537c200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3343 pages used for memmap [ 0.000000] HighMem zone: 424547 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f4c00000 s28800 r0 d24448 u1048576 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 649985 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=f95d712d-cc55-4a13-9581-a59f55785c7a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 13104000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0009ff70) [ 0.000000] Memory: 2564192k/2620864k available (5188k kernel code, 56224k reserved, 2540k data, 700k init, 1711560k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3808000 soft=f380a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2792.776 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.55 BogoMIPS (lpj=11171104) [ 0.004011] pid_max: default: 32768 minimum: 301 [ 0.004043] Security Framework initialized [ 0.004067] AppArmor: AppArmor initialized [ 0.004070] Yama: becoming mindful. [ 0.004148] Mount-cache hash table entries: 512 [ 0.004342] Initializing cgroup subsys ns [ 0.004348] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004354] Initializing cgroup subsys cpuacct [ 0.004362] Initializing cgroup subsys memory [ 0.004376] Initializing cgroup subsys devices [ 0.004380] Initializing cgroup subsys freezer [ 0.004383] Initializing cgroup subsys net_cls [ 0.004387] Initializing cgroup subsys blkio [ 0.004437] CPU0: Hyper-Threading is disabled [ 0.004442] mce: CPU supports 4 MCE banks [ 0.004454] CPU0: Thermal monitoring enabled (TM1) [ 0.005160] SMP alternatives: switching to UP code [ 0.017301] ACPI: Core revision 20110112 [ 0.041359] ftrace: allocating 23640 entries in 47 pages [ 0.044085] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085915] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 0.088004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.088004] ... version: 0 [ 0.088004] ... bit width: 40 [ 0.088004] ... generic registers: 18 [ 0.088004] ... value mask: 000000ffffffffff [ 0.088004] ... max period: 0000007fffffffff [ 0.088004] ... fixed-purpose events: 0 [ 0.088004] ... event mask: 000000000003ffff [ 0.088004] Brought up 1 CPUs [ 0.088004] Total of 1 processors activated (5585.55 BogoMIPS). [ 0.088004] devtmpfs: initialized [ 0.088004] print_constraints: dummy: [ 0.088004] Time: 8:00:12 Date: 05/16/11 [ 0.088004] NET: Registered protocol family 16 [ 0.088004] EISA bus registered [ 0.088004] ACPI: bus type pci registered [ 0.088004] PCI: PCI BIOS revision 2.10 entry at 0xfbb16, last bus=2 [ 0.088004] PCI: Using configuration type 1 for base access [ 0.088624] bio: create slab at 0 [ 0.089418] ACPI: EC: Look up EC in DSDT [ 0.108013] ACPI: Interpreter enabled [ 0.108024] ACPI: (supports S0 S1 S3 S4 S5) [ 0.108054] ACPI: Using IOAPIC for interrupt routing [ 0.133626] ACPI: No dock devices found. [ 0.133630] HEST: Table not found. [ 0.133636] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.135050] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.137760] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.137765] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.137769] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.137773] pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xfebfffff] (ignored) [ 0.137791] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600 [ 0.137796] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.137806] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref] [ 0.137861] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604 [ 0.137899] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880 [ 0.137911] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 0.137986] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 [ 0.138030] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f] [ 0.138065] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 [ 0.138109] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f] [ 0.138143] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 [ 0.138187] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f] [ 0.138220] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03 [ 0.138264] pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f] [ 0.138309] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 [ 0.138333] pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff] [ 0.138413] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.138420] pci 0000:00:1d.7: PME# disabled [ 0.138438] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.138482] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 [ 0.138543] pci 0000:00:1f.0: HPET at 0xfed00000 [ 0.138563] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101 [ 0.138578] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.138589] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.138599] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.138610] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.138620] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.138631] pci 0000:00:1f.1: reg 24: [mem 0xfebffc00-0xfebfffff] [ 0.138658] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 [ 0.138671] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] [ 0.138681] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13] [ 0.138691] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27] [ 0.138700] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33] [ 0.138710] pci 0000:00:1f.2: reg 20: [io 0xfea0-0xfeaf] [ 0.138742] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05 [ 0.138786] pci 0000:00:1f.3: reg 20: [io 0xeda0-0xedbf] [ 0.138832] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 [ 0.138848] pci 0000:00:1f.5: reg 10: [io 0xee00-0xeeff] [ 0.138858] pci 0000:00:1f.5: reg 14: [io 0xedc0-0xedff] [ 0.138868] pci 0000:00:1f.5: reg 18: [mem 0xfebffa00-0xfebffbff] [ 0.138878] pci 0000:00:1f.5: reg 1c: [mem 0xfebff900-0xfebff9ff] [ 0.138916] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.138921] pci 0000:00:1f.5: PME# disabled [ 0.138950] pci 0000:01:00.0: [10de:0322] type 0 class 0x000300 [ 0.138966] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.138975] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref] [ 0.139004] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] [ 0.139055] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.139061] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.139066] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 0.139071] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.139095] pci 0000:02:00.0: [13f6:0111] type 0 class 0x000401 [ 0.139113] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] [ 0.139175] pci 0000:02:00.0: supports D1 D2 [ 0.139195] pci 0000:02:01.0: [14f1:8800] type 0 class 0x000400 [ 0.139213] pci 0000:02:01.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.139299] pci 0000:02:02.0: [14f1:8800] type 0 class 0x000400 [ 0.139318] pci 0000:02:02.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.139396] pci 0000:02:02.2: [14f1:8802] type 0 class 0x000480 [ 0.139413] pci 0000:02:02.2: reg 10: [mem 0xfc000000-0xfcffffff] [ 0.139496] pci 0000:02:08.0: [8086:1050] type 0 class 0x000200 [ 0.139513] pci 0000:02:08.0: reg 10: [mem 0xf9fff000-0xf9ffffff] [ 0.139523] pci 0000:02:08.0: reg 14: [io 0xddc0-0xddff] [ 0.139573] pci 0000:02:08.0: supports D1 D2 [ 0.139576] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.139581] pci 0000:02:08.0: PME# disabled [ 0.139615] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.139622] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.139627] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xfcffffff] [ 0.139633] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.139637] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.139641] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.139654] pci_bus 0000:00: on NUMA node 0 [ 0.139659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.140174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.249744] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.250065] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.250382] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.250700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.251017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.251335] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.251656] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.251973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.252189] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.252196] vgaarb: loaded [ 0.252487] SCSI subsystem initialized [ 0.252561] libata version 3.00 loaded. [ 0.252627] usbcore: registered new interface driver usbfs [ 0.252644] usbcore: registered new interface driver hub [ 0.252680] usbcore: registered new device driver usb [ 0.252833] wmi: Mapper loaded [ 0.252837] PCI: Using ACPI for IRQ routing [ 0.252841] PCI: pci_cache_line_size set to 64 bytes [ 0.252923] reserve RAM buffer: 000000009ff70000 - 000000009fffffff [ 0.253060] NetLabel: Initializing [ 0.253063] NetLabel: domain hash size = 128 [ 0.253065] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.253079] NetLabel: unlabeled traffic allowed by default [ 0.253226] hpet clockevent registered [ 0.253231] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.253237] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.253244] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.256076] Switching to clocksource hpet [ 0.259967] Switched to NOHz mode on CPU #0 [ 0.264886] AppArmor: AppArmor Filesystem Enabled [ 0.264928] pnp: PnP ACPI init [ 0.264955] ACPI: bus type pnp registered [ 0.268265] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.268270] pnp 00:00: [mem 0x00100000-0x00ffffff] [ 0.268273] pnp 00:00: [mem 0x01000000-0x9ff6ffff] [ 0.268276] pnp 00:00: [mem 0x000c0000-0x000fffff] [ 0.268279] pnp 00:00: [mem 0xfec00000-0xfec0ffff] [ 0.268282] pnp 00:00: [mem 0xfee00000-0xfee0ffff] [ 0.268285] pnp 00:00: [mem 0xfed20000-0xfed8ffff] [ 0.268289] pnp 00:00: [mem 0xfecf0000-0xfecf0fff] [ 0.268292] pnp 00:00: [mem 0xffb00000-0xffbfffff] [ 0.268295] pnp 00:00: [mem 0xffc00000-0xffffffff] [ 0.268376] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.268381] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved [ 0.268385] system 00:00: [mem 0x01000000-0x9ff6ffff] could not be reserved [ 0.268389] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved [ 0.268393] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.268397] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.268401] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.268405] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved [ 0.268409] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.268413] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved [ 0.268419] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.269838] pnp 00:01: [bus 00-ff] [ 0.269842] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.269845] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.269848] pnp 00:01: [io 0x0d00-0xffff window] [ 0.269852] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.269855] pnp 00:01: [mem 0x000c0000-0x00000000 window] [ 0.269859] pnp 00:01: [mem 0xa0000000-0xfebfffff window] [ 0.269911] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.272623] pnp 00:02: [io 0x0080-0x009f] [ 0.272629] pnp 00:02: [io 0x0000-0x001f] [ 0.272632] pnp 00:02: [io 0x00c0-0x00df] [ 0.272635] pnp 00:02: [dma 4] [ 0.272673] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.272766] pnp 00:03: [io 0x00f0-0x00ff] [ 0.272780] pnp 00:03: [irq 13] [ 0.272815] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.272912] pnp 00:04: [io 0x0061] [ 0.272950] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.273043] pnp 00:05: [io 0x0070-0x007f] [ 0.273049] pnp 00:05: [irq 8] [ 0.273089] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.275787] pnp 00:06: [io 0x03f0-0x03f5] [ 0.275791] pnp 00:06: [io 0x03f7] [ 0.275797] pnp 00:06: [irq 6] [ 0.275800] pnp 00:06: [dma 2] [ 0.276053] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.276905] pnp 00:07: [io 0x0060] [ 0.276908] pnp 00:07: [io 0x0064] [ 0.276914] pnp 00:07: [irq 1] [ 0.276954] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.280400] pnp 00:08: [io 0x03f8-0x03ff] [ 0.280407] pnp 00:08: [irq 4] [ 0.280603] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.283685] pnp 00:09: [io 0x0378-0x037f] [ 0.283689] pnp 00:09: [io 0x0778-0x077f] [ 0.283695] pnp 00:09: [irq 7] [ 0.283698] pnp 00:09: [dma 0 disabled] [ 0.284202] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.285696] pnp 00:0a: [io 0x0062-0x0063] [ 0.285700] pnp 00:0a: [io 0x0065-0x006f] [ 0.285703] pnp 00:0a: [io 0x00e0-0x00ef] [ 0.285706] pnp 00:0a: [io 0x0800-0x085f] [ 0.285709] pnp 00:0a: [io 0x0c00-0x0c7f] [ 0.285712] pnp 00:0a: [io 0x0860-0x08ff] [ 0.285777] system 00:0a: [io 0x0800-0x085f] has been reserved [ 0.285782] system 00:0a: [io 0x0c00-0x0c7f] has been reserved [ 0.285785] system 00:0a: [io 0x0860-0x08ff] has been reserved [ 0.285790] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.286479] pnp: PnP ACPI: found 11 devices [ 0.286482] ACPI: ACPI bus type pnp unregistered [ 0.286487] PnPBIOS: Disabled by ACPI PNP [ 0.323696] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.323700] pci 0000:00:01.0: bridge window [io disabled] [ 0.323707] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 0.323713] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.323720] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.323725] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.323732] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xfcffffff] [ 0.323737] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.323756] pci 0000:00:1e.0: setting latency timer to 64 [ 0.323762] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.323765] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.323769] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff] [ 0.323773] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 0.323777] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.323780] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xfcffffff] [ 0.323784] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.323787] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.323835] NET: Registered protocol family 2 [ 0.323919] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.324240] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.324996] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.325455] TCP: Hash tables configured (established 131072 bind 65536) [ 0.325459] TCP reno registered [ 0.325466] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.325483] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.325638] NET: Registered protocol family 1 [ 0.325769] pci 0000:01:00.0: Boot video device [ 0.325792] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.325799] PCI: CLS 64 bytes, default 64 [ 0.325899] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 0.325902] Simple Boot Flag at 0x7a set to 0x1 [ 0.326038] cpufreq-nforce2: No nForce2 chipset. [ 0.326217] audit: initializing netlink socket (disabled) [ 0.326231] type=2000 audit(1305532812.320:1): initialized [ 0.335970] Trying to unpack rootfs image as initramfs... [ 0.352481] highmem bounce pool size: 64 pages [ 0.352490] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.360264] VFS: Disk quotas dquot_6.5.2 [ 0.360357] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.361369] fuse init (API version 7.16) [ 0.361508] msgmni has been set to 1665 [ 0.368605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.368643] io scheduler noop registered [ 0.368646] io scheduler deadline registered [ 0.368671] io scheduler cfq registered (default) [ 0.368860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.368894] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.369021] efifb: probing for efifb [ 0.369025] efifb: cannot reserve video memory at 0xa0000 [ 0.369030] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 56k, total 64k [ 0.369034] efifb: mode is 640x350x1, linelength=80, pages=1 [ 0.369036] efifb: scrolling: redraw [ 0.369040] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.369178] Console: switching to colour frame buffer device 80x43 [ 0.369197] fb0: EFI VGA frame buffer device [ 0.369311] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.369322] ACPI: Power Button [VBTN] [ 0.369392] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.369397] ACPI: Power Button [PWRF] [ 0.369555] ACPI: acpi_idle registered with cpuidle [ 0.398883] ERST: Table is not found! [ 0.404155] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.424485] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.424527] isapnp: Scanning for PnP cards... [ 0.514161] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.580707] Linux agpgart interface v0.103 [ 0.580829] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 0.588387] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 0.590133] brd: module loaded [ 0.590988] loop: module loaded [ 0.591131] i2c-core: driver [adp5520] using legacy suspend method [ 0.591134] i2c-core: driver [adp5520] using legacy resume method [ 0.591280] ata_piix 0000:00:1f.1: version 2.13 [ 0.591309] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.591358] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.596067] scsi0 : ata_piix [ 0.600047] scsi1 : ata_piix [ 0.600137] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.600141] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.600208] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.600215] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.600263] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.600614] scsi2 : ata_piix [ 0.600739] ata1: port disabled. ignoring. [ 0.600773] scsi3 : ata_piix [ 0.600835] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18 [ 0.600839] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18 [ 0.601364] Fixed MDIO Bus: probed [ 0.601426] PPP generic driver version 2.4.2 [ 0.601518] tun: Universal TUN/TAP device driver, 1.6 [ 0.601520] tun: (C) 1999-2004 Max Krasnyansky [ 0.601653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.601692] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.601715] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.601720] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.601775] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.601814] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.605700] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.608484] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800 [ 0.667938] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.752328] hub 1-0:1.0: USB hub found [ 0.752336] hub 1-0:1.0: 8 ports detected [ 0.752452] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.752474] uhci_hcd: USB Universal Host Controller Interface driver [ 0.752544] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.752555] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.752560] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.752635] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.752678] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 0.752845] hub 2-0:1.0: USB hub found [ 0.752852] hub 2-0:1.0: 2 ports detected [ 0.752943] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.752952] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.752956] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.753011] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.753041] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 0.753206] hub 3-0:1.0: USB hub found [ 0.753212] hub 3-0:1.0: 2 ports detected [ 0.753298] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.753305] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.753310] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.753363] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.753387] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.753551] hub 4-0:1.0: USB hub found [ 0.753557] hub 4-0:1.0: 2 ports detected [ 0.753637] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.753645] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.753649] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.753702] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.753725] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20 [ 0.753884] hub 5-0:1.0: USB hub found [ 0.753889] hub 5-0:1.0: 2 ports detected [ 0.754042] i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 0.754046] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.754848] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.755004] mousedev: PS/2 mouse device common for all mice [ 0.755188] rtc_cmos 00:05: RTC can wake from S4 [ 0.755254] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.755279] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 0.755415] device-mapper: uevent: version 1.0.3 [ 0.755536] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.758103] device-mapper: multipath: version 1.2.0 loaded [ 0.758109] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.758264] EISA: Probing bus 0 at eisa.0 [ 0.758300] EISA: Detected 0 cards. [ 0.763732] cpuidle: using governor ladder [ 0.763737] cpuidle: using governor menu [ 0.764150] TCP cubic registered [ 0.764340] NET: Registered protocol family 10 [ 0.765042] NET: Registered protocol family 17 [ 0.765073] Registering the dns_resolver key type [ 0.765145] Using IPI No-Shortcut mode [ 0.765309] PM: Hibernation image not present or could not be loaded. [ 0.765323] registered taskstats version 1 [ 0.765578] Magic number: 11:4:18 [ 0.765586] ep_81: hash matches [ 0.765589] ep_81: hash matches [ 0.765592] ep_81: hash matches [ 0.765596] ep_81: hash matches [ 0.765599] ep_81: hash matches [ 0.765684] rtc_cmos 00:05: setting system clock to 2011-05-16 08:00:13 UTC (1305532813) [ 0.765689] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.765691] EDD information not available. [ 0.766269] ata3.00: ATA-7: ST3300822AS, 3.AHH, max UDMA/100 [ 0.766273] ata3.00: 586072368 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 0.766605] ata2.00: ATAPI: JLMS DVD-ROM XJ-HD166, DD05, max UDMA/33 [ 0.766612] ata2.01: ATAPI: TEAC DVD+RW DV-W58E, D.0C, max UDMA/33 [ 0.810796] ata3.00: configured for UDMA/100 [ 0.810818] ata2.00: configured for UDMA/33 [ 0.896441] ata2.01: configured for UDMA/33 [ 0.899194] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.003923] isapnp: No Plug & Play device found [ 1.012694] scsi 1:0:0:0: CD-ROM JLMS DVD-ROM XJ-HD166 DD05 PQ: 0 ANSI: 5 [ 1.014426] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.014432] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.014609] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.014714] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.017438] scsi 1:0:1:0: CD-ROM TEAC DVD+RW DV-W58E D.0C PQ: 0 ANSI: 5 [ 1.019158] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.019334] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.019434] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 1.019699] scsi 2:0:0:0: Direct-Access ATA ST3300822AS 3.AH PQ: 0 ANSI: 5 [ 1.019930] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.020059] sd 2:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 1.020133] sd 2:0:0:0: [sda] Write Protect is off [ 1.020138] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.020171] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.049827] sda: sda1 sda2 < sda5 > [ 1.050269] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.141956] Freeing initrd memory: 12520k freed [ 1.324019] Refined TSC clocksource calibration: 2792.999 MHz. [ 1.324026] Switching to clocksource tsc [ 1.408014] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.824022] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 4.820100] Freeing unused kernel memory: 700k freed [ 4.820645] Write protecting the kernel text: 5192k [ 4.820682] Write protecting the kernel read-only data: 2148k [ 4.860185] <30>udev[69]: starting version 167 [ 5.165689] Floppy drive(s): fd0 is 1.44M [ 5.174821] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 5.174826] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.174885] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.202214] usbcore: registered new interface driver uas [ 5.218194] FDC 0 is a post-1991 82077 [ 5.240518] e100 0000:02:08.0: PME# disabled [ 5.241152] e100 0000:02:08.0: eth0: addr 0xf9fff000, irq 20, MAC addr 00:0c:f1:8e:dd:10 [ 5.267525] Initializing USB Mass Storage driver... [ 5.290538] scsi4 : usb-storage 2-2:1.1 [ 5.291383] usbcore: registered new interface driver usb-storage [ 5.291388] USB Mass Storage support registered. [ 5.304734] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 5.305055] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0 [ 5.305349] usbcore: registered new interface driver usbhid [ 5.305353] usbhid: USB HID core driver [ 5.458699] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.299825] scsi 4:0:0:0: Direct-Access Canon MultiPASS PCcard 0100 PQ: 0 ANSI: 2 [ 6.300452] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 6.321804] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 12.308807] Adding 2619388k swap on /dev/sda5. Priority:-1 extents:1 across:2619388k [ 12.376752] <30>udev[276]: starting version 167 [ 12.454927] lp: driver loaded but no devices found [ 12.459531] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.781823] type=1400 audit(1305532825.513:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=404 comm="apparmor_parser" [ 12.783420] type=1400 audit(1305532825.513:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=404 comm="apparmor_parser" [ 12.783918] type=1400 audit(1305532825.513:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=404 comm="apparmor_parser" [ 13.294127] intel_rng: Firmware space is locked read-only. If you can't or [ 13.294131] intel_rng: don't want to disable this in firmware setup, and if [ 13.294133] intel_rng: you are certain that your system has a functional [ 13.294135] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 13.297576] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.337102] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.340155] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex [ 13.340369] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.678400] parport_pc 00:09: reported by Plug and Play ACPI [ 13.678450] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 13.787482] [drm] Initialized drm 1.1.0 20060810 [ 13.854879] lp0: using parport0 (interrupt-driven). [ 13.924542] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.931167] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034200a2) [ 13.931174] checking generic (a0000 e000) vs hw (f0000000 8000000) [ 13.931177] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 13.931221] Console: switching to colour dummy device 80x25 [ 13.932647] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 13.977816] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 13.977986] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 13.977989] [drm] nouveau 0000:01:00.0: BMP version 5.39 [ 13.977993] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.22 [ 13.977997] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 13.978002] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8 [ 13.978006] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 000088b8 [ 13.978009] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000 [ 13.978012] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000003 [ 13.978125] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 13.978130] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE947 [ 13.992067] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEB87 [ 13.992080] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xECCD [ 13.992118] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE53 [ 13.992124] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEE70 [ 13.992131] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEE8D [ 14.029714] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF011 [ 14.070875] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 14.070881] [drm] nouveau 0000:01:00.0: 0: memory 0MHz [ 14.070891] [drm] nouveau 0000:01:00.0: c: memory 405MHz core 249MHz [ 14.072290] [TTM] Zone kernel: Available graphics memory: 432926 kiB. [ 14.072295] [TTM] Zone highmem: Available graphics memory: 1288706 kiB. [ 14.072298] [TTM] Initializing pool allocator. [ 14.072317] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM [ 14.072559] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 14.072575] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [ 14.072584] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 14.072624] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 14.072656] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture) [ 14.074447] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 14.074451] [drm] No driver support for vblank timestamp query. [ 14.080131] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 14.080137] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 14.080142] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 14.080148] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 14.285067] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f25c9e00 [ 14.285385] Console: switching to colour frame buffer device 160x64 [ 14.285395] fb0: nouveaufb frame buffer device [ 14.285397] drm: registered panic notifier [ 14.285408] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 14.700131] type=1400 audit(1305532827.433:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=717 comm="apparmor_parser" [ 14.708066] type=1400 audit(1305532827.441:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=719 comm="apparmor_parser" [ 14.720854] type=1400 audit(1305532827.453:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser" [ 14.721358] type=1400 audit(1305532827.453:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser" [ 14.743804] type=1400 audit(1305532827.473:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=721 comm="apparmor_parser" [ 14.748341] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.768250] type=1400 audit(1305532827.501:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=721 comm="apparmor_parser" [ 14.790451] type=1400 audit(1305532827.521:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=721 comm="apparmor_parser" [ 14.908459] Linux video capture interface: v2.00 [ 15.215324] IR NEC protocol handler initialized [ 15.226595] IR RC5(x) protocol handler initialized [ 15.270266] IR RC6 protocol handler initialized [ 15.316764] [drm] nouveau 0000:01:00.0: 0xB536: Parsing digital output script table [ 15.316786] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 15.316791] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 15.317352] IR JVC protocol handler initialized [ 15.344930] IR Sony protocol handler initialized [ 15.389828] lirc_dev: IR Remote Control driver registered, major 250 [ 15.405459] IR LIRC bridge handler initialized [ 15.716074] ppdev: user-space parallel port driver [ 15.933271] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded [ 15.935800] cx88[0]: Your board isn't known (yet) to the driver. You can [ 15.935802] cx88[0]: try to pick one of the existing card configs via [ 15.935804] cx88[0]: card= insmod option. Updating to the latest [ 15.935806] cx88[0]: version might help as well. [ 15.935809] cx88[0]: Here is a list of valid choices for the card= insmod option: [ 15.935813] cx88[0]: card=0 -> UNKNOWN/GENERIC [ 15.935815] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models [ 15.935818] cx88[0]: card=2 -> GDI Black Gold [ 15.935821] cx88[0]: card=3 -> PixelView [ 15.935823] cx88[0]: card=4 -> ATI TV Wonder Pro [ 15.935826] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert [ 15.935829] cx88[0]: card=6 -> AverTV Studio 303 (M126) [ 15.935832] cx88[0]: card=7 -> MSI TV-@nywhere Master [ 15.935835] cx88[0]: card=8 -> Leadtek Winfast DV2000 [ 15.935838] cx88[0]: card=9 -> Leadtek PVR 2000 [ 15.935840] cx88[0]: card=10 -> IODATA GV-VCP3/PCI [ 15.935843] cx88[0]: card=11 -> Prolink PlayTV PVR [ 15.935846] cx88[0]: card=12 -> ASUS PVR-416 [ 15.935849] cx88[0]: card=13 -> MSI TV-@nywhere [ 15.935851] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T [ 15.935854] cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1 [ 15.935857] cx88[0]: card=16 -> KWorld LTV883RF [ 15.935860] cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q [ 15.935863] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T [ 15.935866] cx88[0]: card=19 -> Conexant DVB-T reference design [ 15.935869] cx88[0]: card=20 -> Provideo PV259 [ 15.935871] cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus [ 15.935874] cx88[0]: card=22 -> pcHDTV HD3000 HDTV [ 15.935877] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T [ 15.935880] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models [ 15.935883] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) [ 15.935886] cx88[0]: card=26 -> IODATA GV/BCTV7E [ 15.935889] cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo) [ 15.935892] cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T [ 15.935895] cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI [ 15.935898] cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T [ 15.935901] cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold [ 15.935904] cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550 [ 15.935907] cx88[0]: card=33 -> Kworld V-Stream Xpert DVD [ 15.935910] cx88[0]: card=34 -> ATI HDTV Wonder [ 15.935913] cx88[0]: card=35 -> WinFast DTV1000-T [ 15.935915] cx88[0]: card=36 -> AVerTV 303 (M126) [ 15.935918] cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S [ 15.935921] cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S [ 15.935924] cx88[0]: card=39 -> KWorld DVB-S 100 [ 15.935927] cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid [ 15.935930] cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [ 15.935933] cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro [ 15.935936] cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702 [ 15.935939] cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital [ 15.935942] cx88[0]: card=45 -> KWorld HardwareMpegTV XPert [ 15.935945] cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid [ 15.935948] cx88[0]: card=47 -> pcHDTV HD5500 HDTV [ 15.935951] cx88[0]: card=48 -> Kworld MCE 200 Deluxe [ 15.935954] cx88[0]: card=49 -> PixelView PlayTV P7000 [ 15.935957] cx88[0]: card=50 -> NPG Tech Real TV FM Top 10 [ 15.935959] cx88[0]: card=51 -> WinFast DTV2000 H [ 15.935962] cx88[0]: card=52 -> Geniatech DVB-S [ 15.935965] cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [ 15.935968] cx88[0]: card=54 -> Norwood Micro TV Tuner [ 15.935971] cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [ 15.935975] cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [ 15.935978] cx88[0]: card=57 -> ADS Tech Instant Video PCI [ 15.935981] cx88[0]: card=58 -> Pinnacle PCTV HD 800i [ 15.935984] cx88[0]: card=59 -> DViCO FusionHDTV 5 PCI nano [ 15.935987] cx88[0]: card=60 -> Pinnacle Hybrid PCTV [ 15.935989] cx88[0]: card=61 -> Leadtek TV2000 XP Global [ 15.935992] cx88[0]: card=62 -> PowerColor RA330 [ 15.936055] cx88[0]: card=63 -> Geniatech X8000-MT DVBT [ 15.936058] cx88[0]: card=64 -> DViCO FusionHDTV DVB-T PRO [ 15.936061] cx88[0]: card=65 -> DViCO FusionHDTV 7 Gold [ 15.936064] cx88[0]: card=66 -> Prolink Pixelview MPEG 8000GT [ 15.936067] cx88[0]: card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [ 15.936070] cx88[0]: card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [ 15.936073] cx88[0]: card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [ 15.936077] cx88[0]: card=70 -> TeVii S460 DVB-S/S2 [ 15.936079] cx88[0]: card=71 -> Omicom SS4 DVB-S/S2 PCI [ 15.936082] cx88[0]: card=72 -> TBS 8920 DVB-S/S2 [ 15.936085] cx88[0]: card=73 -> TeVii S420 DVB-S [ 15.936088] cx88[0]: card=74 -> Prolink Pixelview Global Extreme [ 15.936091] cx88[0]: card=75 -> PROF 7300 DVB-S/S2 [ 15.936093] cx88[0]: card=76 -> SATTRADE ST4200 DVB-S/S2 [ 15.936096] cx88[0]: card=77 -> TBS 8910 DVB-S [ 15.936099] cx88[0]: card=78 -> Prof 6200 DVB-S [ 15.936102] cx88[0]: card=79 -> Terratec Cinergy HT PCI MKII [ 15.936105] cx88[0]: card=80 -> Hauppauge WinTV-IR Only [ 15.936108] cx88[0]: card=81 -> Leadtek WinFast DTV1800 Hybrid [ 15.936111] cx88[0]: card=82 -> WinFast DTV2000 H rev. J [ 15.936113] cx88[0]: card=83 -> Prof 7301 DVB-S/S2 [ 15.936116] cx88[0]: card=84 -> Samsung SMT 7020 DVB-S [ 15.936119] cx88[0]: card=85 -> Twinhan VP-1027 DVB-S [ 15.936123] cx88[0]: subsystem: 1002:a103, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0 [ 15.936127] cx88[0]: TV tuner type -1, Radio tuner type -1 [ 15.995268] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 16.172386] i2c-core: driver [tuner] using legacy suspend method [ 16.172391] i2c-core: driver [tuner] using legacy resume method [ 16.501358] cx88[0]/2: cx2388x 8802 Driver Manager [ 16.506544] cx8800 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.509709] cx88[0]: subsystem: 1002:00f8, board: ATI TV Wonder Pro [card=4,autodetected], frontend(s): 0 [ 16.509713] cx88[0]: TV tuner type 44, Radio tuner type -1 [ 16.583356] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.583398] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 16.729881] All bytes are equal. It is not a TEA5767 [ 16.730013] tuner 3-0060: chip found @ 0xc0 (cx88[0]) [ 16.772018] tuner 3-0043: chip found @ 0x86 (cx88[0]) [ 16.777355] tda9887 3-0043: creating new instance [ 16.777360] tda9887 3-0043: tda988[5/6/7] found [ 16.835483] tuner-simple 3-0060: creating new instance [ 16.835489] tuner-simple 3-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant)) [ 16.841107] cx88[0]/0: found at 0000:02:01.0, rev: 5, irq: 22, latency: 64, mmio: 0xfa000000 [ 16.841975] cx88[0]/0: registered device video0 [v4l2] [ 16.842831] cx88[0]/0: registered device vbi0 [ 16.846799] C-Media PCI 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 16.859283] cx8800 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 16.886912] cx88[1]: Your board isn't known (yet) to the driver. You can [ 16.886916] cx88[1]: try to pick one of the existing card configs via [ 16.886918] cx88[1]: card= insmod option. Updating to the latest [ 16.886920] cx88[1]: version might help as well. [ 16.886924] cx88[1]: Here is a list of valid choices for the card= insmod option: [ 16.886927] cx88[1]: card=0 -> UNKNOWN/GENERIC [ 16.886930] cx88[1]: card=1 -> Hauppauge WinTV 34xxx models [ 16.886933] cx88[1]: card=2 -> GDI Black Gold [ 16.886936] cx88[1]: card=3 -> PixelView [ 16.886939] cx88[1]: card=4 -> ATI TV Wonder Pro [ 16.886942] cx88[1]: card=5 -> Leadtek Winfast 2000XP Expert [ 16.886945] cx88[1]: card=6 -> AverTV Studio 303 (M126) [ 16.886948] cx88[1]: card=7 -> MSI TV-@nywhere Master [ 16.886951] cx88[1]: card=8 -> Leadtek Winfast DV2000 [ 16.886954] cx88[1]: card=9 -> Leadtek PVR 2000 [ 16.886957] cx88[1]: card=10 -> IODATA GV-VCP3/PCI [ 16.886960] cx88[1]: card=11 -> Prolink PlayTV PVR [ 16.886963] cx88[1]: card=12 -> ASUS PVR-416 [ 16.886965] cx88[1]: card=13 -> MSI TV-@nywhere [ 16.886968] cx88[1]: card=14 -> KWorld/VStream XPert DVB-T [ 16.886971] cx88[1]: card=15 -> DViCO FusionHDTV DVB-T1 [ 16.886974] cx88[1]: card=16 -> KWorld LTV883RF [ 16.886977] cx88[1]: card=17 -> DViCO FusionHDTV 3 Gold-Q [ 16.886980] cx88[1]: card=18 -> Hauppauge Nova-T DVB-T [ 16.886983] cx88[1]: card=19 -> Conexant DVB-T reference design [ 16.886986] cx88[1]: card=20 -> Provideo PV259 [ 16.886989] cx88[1]: card=21 -> DViCO FusionHDTV DVB-T Plus [ 16.886992] cx88[1]: card=22 -> pcHDTV HD3000 HDTV [ 16.886995] cx88[1]: card=23 -> digitalnow DNTV Live! DVB-T [ 16.886998] cx88[1]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models [ 16.887002] cx88[1]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) [ 16.887005] cx88[1]: card=26 -> IODATA GV/BCTV7E [ 16.887008] cx88[1]: card=27 -> PixelView PlayTV Ultra Pro (Stereo) [ 16.887011] cx88[1]: card=28 -> DViCO FusionHDTV 3 Gold-T [ 16.887014] cx88[1]: card=29 -> ADS Tech Instant TV DVB-T PCI [ 16.887017] cx88[1]: card=30 -> TerraTec Cinergy 1400 DVB-T [ 16.887020] cx88[1]: card=31 -> DViCO FusionHDTV 5 Gold [ 16.887023] cx88[1]: card=32 -> AverMedia UltraTV Media Center PCI 550 [ 16.887027] cx88[1]: card=33 -> Kworld V-Stream Xpert DVD [ 16.887030] cx88[1]: card=34 -> ATI HDTV Wonder [ 16.887033] cx88[1]: card=35 -> WinFast DTV1000-T [ 16.887035] cx88[1]: card=36 -> AVerTV 303 (M126) [ 16.887038] cx88[1]: card=37 -> Hauppauge Nova-S-Plus DVB-S [ 16.887041] cx88[1]: card=38 -> Hauppauge Nova-SE2 DVB-S [ 16.887044] cx88[1]: card=39 -> KWorld DVB-S 100 [ 16.887047] cx88[1]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid [ 16.887051] cx88[1]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [ 16.887054] cx88[1]: card=42 -> digitalnow DNTV Live! DVB-T Pro [ 16.887057] cx88[1]: card=43 -> KWorld/VStream XPert DVB-T with cx22702 [ 16.887061] cx88[1]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital [ 16.887064] cx88[1]: card=45 -> KWorld HardwareMpegTV XPert [ 16.887067] cx88[1]: card=46 -> DViCO FusionHDTV DVB-T Hybrid [ 16.887070] cx88[1]: card=47 -> pcHDTV HD5500 HDTV [ 16.887073] cx88[1]: card=48 -> Kworld MCE 200 Deluxe [ 16.887076] cx88[1]: card=49 -> PixelView PlayTV P7000 [ 16.887079] cx88[1]: card=50 -> NPG Tech Real TV FM Top 10 [ 16.887082] cx88[1]: card=51 -> WinFast DTV2000 H [ 16.887085] cx88[1]: card=52 -> Geniatech DVB-S [ 16.887088] cx88[1]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [ 16.887091] cx88[1]: card=54 -> Norwood Micro TV Tuner [ 16.887094] cx88[1]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [ 16.887097] cx88[1]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [ 16.887101] cx88[1]: card=57 -> ADS Tech Instant Video PCI [ 16.887104] cx88[1]: card=58 -> Pinnacle PCTV HD 800i [ 16.887107] cx88[1]: card=59 -> DViCO FusionHDTV 5 PCI nano [ 16.887110] cx88[1]: card=60 -> Pinnacle Hybrid PCTV [ 16.887113] cx88[1]: card=61 -> Leadtek TV2000 XP Global [ 16.887116] cx88[1]: card=62 -> PowerColor RA330 [ 16.887119] cx88[1]: card=63 -> Geniatech X8000-MT DVBT [ 16.887122] cx88[1]: card=64 -> DViCO FusionHDTV DVB-T PRO [ 16.887125] cx88[1]: card=65 -> DViCO FusionHDTV 7 Gold [ 16.887128] cx88[1]: card=66 -> Prolink Pixelview MPEG 8000GT [ 16.887131] cx88[1]: card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [ 16.887134] cx88[1]: card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [ 16.887138] cx88[1]: card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [ 16.887141] cx88[1]: card=70 -> TeVii S460 DVB-S/S2 [ 16.887144] cx88[1]: card=71 -> Omicom SS4 DVB-S/S2 PCI [ 16.887147] cx88[1]: card=72 -> TBS 8920 DVB-S/S2 [ 16.887150] cx88[1]: card=73 -> TeVii S420 DVB-S [ 16.887153] cx88[1]: card=74 -> Prolink Pixelview Global Extreme [ 16.887156] cx88[1]: card=75 -> PROF 7300 DVB-S/S2 [ 16.887159] cx88[1]: card=76 -> SATTRADE ST4200 DVB-S/S2 [ 16.887162] cx88[1]: card=77 -> TBS 8910 DVB-S [ 16.887165] cx88[1]: card=78 -> Prof 6200 DVB-S [ 16.887167] cx88[1]: card=79 -> Terratec Cinergy HT PCI MKII [ 16.887171] cx88[1]: card=80 -> Hauppauge WinTV-IR Only [ 16.887174] cx88[1]: card=81 -> Leadtek WinFast DTV1800 Hybrid [ 16.887177] cx88[1]: card=82 -> WinFast DTV2000 H rev. J [ 16.887180] cx88[1]: card=83 -> Prof 7301 DVB-S/S2 [ 16.887183] cx88[1]: card=84 -> Samsung SMT 7020 DVB-S [ 16.887186] cx88[1]: card=85 -> Twinhan VP-1027 DVB-S [ 16.887190] cx88[1]: subsystem: 1002:a103, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0 [ 16.887194] cx88[1]: TV tuner type -1, Radio tuner type -1 [ 17.099361] intel8x0_measure_ac97_clock: measured 58255 usecs (2806 samples) [ 17.099366] intel8x0: clocking to 48000 [ 17.137343] cx88[1]/0: found at 0000:02:02.0, rev: 5, irq: 17, latency: 64, mmio: 0xfb000000 [ 17.137612] cx88[1]/0: registered device video1 [v4l2] [ 17.137926] cx88[1]/0: registered device vbi1 [ 17.702394] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 24.256008] eth0: no IPv6 routers present [ 28.722782] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 935.789621] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [22880.522814] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [23939.783349] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [25304.717051] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)