[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=cbeca071-ce06-4346-96c7-55363e94590c ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf590000 (usable) [ 0.000000] BIOS-e820: 00000000cf590000 - 00000000cf5e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf5f0000 - 00000000cf600000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CAFFF write-protect [ 0.000000] CB000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask FE0000000 write-back [ 0.000000] 1 base 120000000 mask FF0000000 write-back [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 0C0000000 mask FF0000000 write-back [ 0.000000] 5 base 0CF700000 mask FFFF00000 uncachable [ 0.000000] 6 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 7 base 0CF600000 mask FFFF00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cf600000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcf590 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cf590000 (usable) [ 0.000000] modified: 00000000cf590000 - 00000000cf5e3000 (ACPI NVS) [ 0.000000] modified: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data) [ 0.000000] modified: 00000000cf5f0000 - 00000000cf600000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf590000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cf400000 page 2M [ 0.000000] 00cf400000 - 00cf590000 page 4k [ 0.000000] kernel direct mapping tables up to cf590000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 [ 0.000000] RAMDISK: 377fb000 - 37feffc0 [ 0.000000] ACPI: RSDP 00000000000f97a0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000cf5e3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000cf5e7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000cf5e3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cf590000 00040 [ 0.000000] ACPI: HPET 00000000cf5e73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000cf5e7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: SLIC 00000000cf5e7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: DMY2 00000000cf5e75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000cf5e7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 00000000cf5e7ca0 00380 (v01 PmRef CpuPm 00003000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 0000000000037fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fb000 - 0037feffc0] RAMDISK ==> [00377fb000 - 0037feffc0] [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a300f8] BRK ==> [0001a30000 - 0001a300f8] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f3f00] f3f00 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cf590 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1045801 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 105 pages reserved [ 0.000000] DMA zone: 3832 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 830920 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cf590000 - 00000000cf5e3000 [ 0.000000] PM: Registered nosave memory: 00000000cf5e3000 - 00000000cf5f0000 [ 0.000000] PM: Registered nosave memory: 00000000cf5f0000 - 00000000cf600000 [ 0.000000] PM: Registered nosave memory: 00000000cf600000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cf600000 (gap: cf600000:10a00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028672 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=cbeca071-ce06-4346-96c7-55363e94590c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4038536k/4980736k available (5422k kernel code, 797532k absent, 144668k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.986 MHz processor. [ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.97 BogoMIPS (lpj=19949860) [ 0.010039] Security Framework initialized [ 0.010061] AppArmor: AppArmor initialized [ 0.010502] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012795] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013854] Mount-cache hash table entries: 256 [ 0.014030] Initializing cgroup subsys ns [ 0.014038] Initializing cgroup subsys cpuacct [ 0.014042] Initializing cgroup subsys memory [ 0.014050] Initializing cgroup subsys devices [ 0.014053] Initializing cgroup subsys freezer [ 0.014055] Initializing cgroup subsys net_cls [ 0.014079] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.014082] CPU: L2 cache: 1024K [ 0.014085] CPU 0/0x0 -> Node 0 [ 0.014088] CPU: Physical Processor ID: 0 [ 0.014089] CPU: Processor Core ID: 0 [ 0.014093] mce: CPU supports 6 MCE banks [ 0.014102] CPU0: Thermal monitoring enabled (TM2) [ 0.014108] using mwait in idle threads. [ 0.014109] Performance Events: Core2 events, Intel PMU driver. [ 0.014116] ... version: 2 [ 0.014118] ... bit width: 40 [ 0.014119] ... generic registers: 2 [ 0.014121] ... value mask: 000000ffffffffff [ 0.014123] ... max period: 000000007fffffff [ 0.014125] ... fixed-purpose events: 3 [ 0.014126] ... event mask: 0000000700000003 [ 0.016844] ACPI: Core revision 20090903 [ 0.030011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030017] ftrace: allocating 22527 entries in 89 pages [ 0.040067] Setting APIC routing to flat [ 0.040378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.157710] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 1024K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.310116] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.310123] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320020] Brought up 2 CPUs [ 0.320022] Total of 2 processors activated (7979.98 BogoMIPS). [ 0.320376] CPU0 attaching sched-domain: [ 0.320380] domain 0: span 0-1 level MC [ 0.320382] groups: 0 1 [ 0.320389] CPU1 attaching sched-domain: [ 0.320391] domain 0: span 0-1 level MC [ 0.320394] groups: 1 0 [ 0.320496] devtmpfs: initialized [ 0.320496] regulator: core version 0.5 [ 0.320496] Time: 12:12:00 Date: 08/22/10 [ 0.320496] NET: Registered protocol family 16 [ 0.320496] Trying to unpack rootfs image as initramfs... [ 0.320496] ACPI: bus type pci registered [ 0.320496] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.320496] PCI: MCFG area at e0000000 reserved in E820 [ 0.328248] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.328251] PCI: Using configuration type 1 for base access [ 0.340199] bio: create slab at 0 [ 0.340962] ACPI: EC: Look up EC in DSDT [ 0.346327] ACPI: Interpreter enabled [ 0.346335] ACPI: (supports S0 S3 S4 S5) [ 0.346365] ACPI: Using IOAPIC for interrupt routing [ 0.351612] ACPI: No dock devices found. [ 0.351743] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.351868] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.351872] pci 0000:00:01.0: PME# disabled [ 0.351899] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff] [ 0.351904] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07] [ 0.351909] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.351914] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.351999] pci 0000:00:19.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.352005] pci 0000:00:19.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff] [ 0.352012] pci 0000:00:19.0: reg 18 io port: [0xfe00-0xfe1f] [ 0.352052] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.352055] pci 0000:00:19.0: PME# disabled [ 0.352106] pci 0000:00:1a.0: reg 20 io port: [0xfd00-0xfd1f] [ 0.352179] pci 0000:00:1a.1: reg 20 io port: [0xfc00-0xfc1f] [ 0.352249] pci 0000:00:1a.2: reg 20 io port: [0xfb00-0xfb1f] [ 0.352323] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.352380] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.352385] pci 0000:00:1a.7: PME# disabled [ 0.352432] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff] [ 0.352475] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.352478] pci 0000:00:1b.0: PME# disabled [ 0.352531] pci 0000:00:1d.0: reg 20 io port: [0xfa00-0xfa1f] [ 0.352601] pci 0000:00:1d.1: reg 20 io port: [0xf900-0xf91f] [ 0.352674] pci 0000:00:1d.2: reg 20 io port: [0xf800-0xf81f] [ 0.352748] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff] [ 0.352804] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.352808] pci 0000:00:1d.7: PME# disabled [ 0.352937] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.352941] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.352945] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) [ 0.352948] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f) [ 0.353004] pci 0000:00:1f.2: reg 10 io port: [0xf700-0xf707] [ 0.353010] pci 0000:00:1f.2: reg 14 io port: [0xf600-0xf603] [ 0.353015] pci 0000:00:1f.2: reg 18 io port: [0xf500-0xf507] [ 0.353021] pci 0000:00:1f.2: reg 1c io port: [0xf400-0xf403] [ 0.353027] pci 0000:00:1f.2: reg 20 io port: [0xf300-0xf30f] [ 0.353033] pci 0000:00:1f.2: reg 24 io port: [0xf200-0xf20f] [ 0.353082] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff] [ 0.353096] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.353145] pci 0000:00:1f.5: reg 10 io port: [0xf000-0xf007] [ 0.353151] pci 0000:00:1f.5: reg 14 io port: [0xef00-0xef03] [ 0.353157] pci 0000:00:1f.5: reg 18 io port: [0xee00-0xee07] [ 0.353163] pci 0000:00:1f.5: reg 1c io port: [0xed00-0xed03] [ 0.353169] pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f] [ 0.353174] pci 0000:00:1f.5: reg 24 io port: [0xeb00-0xeb0f] [ 0.353243] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.353247] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.353251] pci 0000:00:01.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.353285] pci 0000:02:00.0: reg 10 32bit mmio: [0xfddf0000-0xfddfffff] [ 0.353292] pci 0000:02:00.0: reg 14 io port: [0xdf00-0xdf07] [ 0.353334] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.353338] pci 0000:02:00.0: PME# disabled [ 0.353385] pci 0000:00:1e.0: transparent bridge [ 0.353388] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.353393] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.353399] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.353415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.353611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.372078] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.372190] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.372299] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.372408] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.372516] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.372624] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 9 10 11 12 14 15) [ 0.372734] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.372843] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.372975] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.372991] vgaarb: loaded [ 0.373116] SCSI subsystem initialized [ 0.373215] libata version 3.00 loaded. [ 0.373296] usbcore: registered new interface driver usbfs [ 0.373309] usbcore: registered new interface driver hub [ 0.373340] usbcore: registered new device driver usb [ 0.373499] ACPI: WMI: Mapper loaded [ 0.373502] PCI: Using ACPI for IRQ routing [ 0.373681] NetLabel: Initializing [ 0.373683] NetLabel: domain hash size = 128 [ 0.373685] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.373699] NetLabel: unlabeled traffic allowed by default [ 0.373748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.373754] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.380067] Switching to clocksource tsc [ 0.381995] AppArmor: AppArmor Filesystem Enabled [ 0.382019] pnp: PnP ACPI init [ 0.382040] ACPI: bus type pnp registered [ 0.384116] pnp: PnP ACPI: found 12 devices [ 0.384119] ACPI: ACPI bus type pnp unregistered [ 0.384132] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.384136] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.384139] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.384141] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.384150] system 00:08: ioport range 0x400-0x4bf could not be reserved [ 0.384158] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.384164] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved [ 0.384167] system 00:0b: iomem range 0xcf600000-0xcf6fffff could not be reserved [ 0.384171] system 00:0b: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.384174] system 00:0b: iomem range 0xcf590000-0xcf5fffff could not be reserved [ 0.384177] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.384180] system 00:0b: iomem range 0x100000-0xcf58ffff could not be reserved [ 0.384183] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.384186] system 00:0b: iomem range 0xfed14000-0xfed1dfff has been reserved [ 0.384189] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.384192] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.384195] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.384198] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.384201] system 00:0b: iomem range 0xe0000-0xeffff has been reserved [ 0.388960] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.388964] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.388969] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff [ 0.388972] pci 0000:00:01.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.388978] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.388981] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.388986] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff [ 0.388990] pci 0000:00:1e.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.389006] alloc irq_desc for 16 on node -1 [ 0.389009] alloc kstat_irqs on node -1 [ 0.389017] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.389022] pci 0000:00:01.0: setting latency timer to 64 [ 0.389029] pci 0000:00:1e.0: setting latency timer to 64 [ 0.389034] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.389037] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.389040] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.389042] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.389045] pci_bus 0000:01: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.389047] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.389050] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.389052] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.389055] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.389057] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.389102] NET: Registered protocol family 2 [ 0.389306] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.390842] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.395712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.396286] TCP: Hash tables configured (established 524288 bind 65536) [ 0.396291] TCP reno registered [ 0.396449] NET: Registered protocol family 1 [ 0.396474] pci 0000:00:02.0: Boot video device [ 0.396868] Scanning for low memory corruption every 60 seconds [ 0.397038] audit: initializing netlink socket (disabled) [ 0.397049] type=2000 audit(1282479118.389:1): initialized [ 0.407297] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.408811] VFS: Disk quotas dquot_6.5.2 [ 0.408882] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.409578] fuse init (API version 7.13) [ 0.409668] msgmni has been set to 7887 [ 0.409915] alg: No test for stdrng (krng) [ 0.409979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.409983] io scheduler noop registered [ 0.409985] io scheduler anticipatory registered [ 0.409987] io scheduler deadline registered [ 0.410029] io scheduler cfq registered (default) [ 0.410173] alloc irq_desc for 24 on node -1 [ 0.410175] alloc kstat_irqs on node -1 [ 0.410186] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.410193] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.410268] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.410293] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.410400] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.410405] ACPI: Power Button [PWRB] [ 0.410465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.410468] ACPI: Power Button [PWRF] [ 0.410533] fan PNP0C0B:00: registered as cooling_device0 [ 0.410539] ACPI: Fan [FAN] (on) [ 0.411126] ACPI: SSDT 00000000cf5e7680 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203) [ 0.411345] processor LNXCPU:00: registered as cooling_device1 [ 0.411592] ACPI: SSDT 00000000cf5e7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) [ 0.411789] processor LNXCPU:01: registered as cooling_device2 [ 0.414042] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.414052] ACPI: Thermal Zone [THRM] (40 C) [ 0.415693] Linux agpgart interface v0.103 [ 0.415733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.417096] brd: module loaded [ 0.417614] loop: module loaded [ 0.417734] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.417855] ata_piix 0000:00:1f.2: version 2.13 [ 0.417875] alloc irq_desc for 19 on node -1 [ 0.417877] alloc kstat_irqs on node -1 [ 0.417885] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.417890] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.417941] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.418040] scsi0 : ata_piix [ 0.418128] scsi1 : ata_piix [ 0.418886] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19 [ 0.418892] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19 [ 0.418922] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.418928] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.418971] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.419021] scsi2 : ata_piix [ 0.419084] scsi3 : ata_piix [ 0.419464] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19 [ 0.419469] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19 [ 0.419837] Fixed MDIO Bus: probed [ 0.419872] PPP generic driver version 2.4.2 [ 0.419928] tun: Universal TUN/TAP device driver, 1.6 [ 0.419930] tun: (C) 1999-2004 Max Krasnyansky [ 0.420037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.420062] alloc irq_desc for 18 on node -1 [ 0.420065] alloc kstat_irqs on node -1 [ 0.420072] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.420102] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.420105] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.420141] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.420171] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.424040] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.424063] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000 [ 0.439539] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.439687] usb usb1: configuration #1 chosen from 1 choice [ 0.439719] hub 1-0:1.0: USB hub found [ 0.439729] hub 1-0:1.0: 6 ports detected [ 0.439811] alloc irq_desc for 23 on node -1 [ 0.439813] alloc kstat_irqs on node -1 [ 0.439821] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.439849] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.439852] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.439900] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.439932] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.443814] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.443836] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000 [ 0.459520] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.459663] usb usb2: configuration #1 chosen from 1 choice [ 0.459695] hub 2-0:1.0: USB hub found [ 0.459705] hub 2-0:1.0: 6 ports detected [ 0.459780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.459799] uhci_hcd: USB Universal Host Controller Interface driver [ 0.459845] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.459856] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.459860] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.459909] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.459948] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00 [ 0.460040] usb usb3: configuration #1 chosen from 1 choice [ 0.460070] hub 3-0:1.0: USB hub found [ 0.460078] hub 3-0:1.0: 2 ports detected [ 0.460126] alloc irq_desc for 21 on node -1 [ 0.460128] alloc kstat_irqs on node -1 [ 0.460135] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.460142] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.460145] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.460180] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.460210] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00 [ 0.460304] usb usb4: configuration #1 chosen from 1 choice [ 0.460329] hub 4-0:1.0: USB hub found [ 0.460335] hub 4-0:1.0: 2 ports detected [ 0.460384] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.460390] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.460393] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.460441] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.460467] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00 [ 0.460558] usb usb5: configuration #1 chosen from 1 choice [ 0.460584] hub 5-0:1.0: USB hub found [ 0.460591] hub 5-0:1.0: 2 ports detected [ 0.460635] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.460641] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.460644] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.460691] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.460717] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00 [ 0.460808] usb usb6: configuration #1 chosen from 1 choice [ 0.460836] hub 6-0:1.0: USB hub found [ 0.460843] hub 6-0:1.0: 2 ports detected [ 0.460891] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.460897] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.460900] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.460937] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.460961] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900 [ 0.461052] usb usb7: configuration #1 chosen from 1 choice [ 0.461081] hub 7-0:1.0: USB hub found [ 0.461090] hub 7-0:1.0: 2 ports detected [ 0.461134] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.461140] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.461143] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.461181] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.461207] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800 [ 0.461300] usb usb8: configuration #1 chosen from 1 choice [ 0.461325] hub 8-0:1.0: USB hub found [ 0.461332] hub 8-0:1.0: 2 ports detected [ 0.461438] PNP: No PS/2 controller found. Probing ports directly. [ 0.461794] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.461801] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.461952] mice: PS/2 mouse device common for all mice [ 0.462078] rtc_cmos 00:04: RTC can wake from S4 [ 0.462124] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.462151] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.462301] device-mapper: uevent: version 1.0.3 [ 0.462445] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.462523] device-mapper: multipath: version 1.1.0 loaded [ 0.462526] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.462689] cpuidle: using governor ladder [ 0.462692] cpuidle: using governor menu [ 0.463053] TCP cubic registered [ 0.463186] NET: Registered protocol family 10 [ 0.463677] lo: Disabled Privacy Extensions [ 0.463973] NET: Registered protocol family 17 [ 0.464689] PM: Resume from disk failed. [ 0.464703] registered taskstats version 1 [ 0.465044] Magic number: 6:106:229 [ 0.465136] rtc_cmos 00:04: setting system clock to 2010-08-22 12:12:00 UTC (1282479120) [ 0.465139] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.465141] EDD information not available. [ 0.520957] Freeing initrd memory: 8147k freed [ 0.759778] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.780532] ata4: SATA link down (SStatus 0 SControl 300) [ 0.910376] usb 1-3: configuration #1 chosen from 1 choice [ 0.910529] hub 1-3:1.0: USB hub found [ 0.910610] hub 1-3:1.0: 7 ports detected [ 0.940041] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.960215] ata3.00: ATA-7: WDC WD2500JS-60NCB1, 10.02E02, max UDMA/100 [ 0.960218] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.000268] ata3.00: configured for UDMA/100 [ 1.280074] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.280090] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.280104] ata2.01: link offline, clearing class 3 to NONE [ 1.290118] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.290131] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.300431] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100 [ 1.309708] ata1.00: ATA-8: WDC WD3200AAKS-75B3A0, 01.03A01, max UDMA/133 [ 1.309713] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.320265] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 1.340411] ata2.00: configured for UDMA/100 [ 1.341069] ata1.00: configured for UDMA/133 [ 1.341237] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5 [ 1.341401] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.341421] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.341450] sd 0:0:0:0: [sda] Write Protect is off [ 1.341452] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.341477] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.341642] sda: [ 1.343045] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5 [ 1.347842] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.347848] Uniform CD-ROM driver Revision: 3.20 [ 1.347990] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.348046] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.348158] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5 [ 1.348276] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.348278] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.348327] sd 2:0:0:0: [sdb] Write Protect is off [ 1.348330] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.348356] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.348486] sdb: sda1 sda2 sda3 [ 1.351073] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.381689] sdb1 sdb2 < sdb5 sdb6 > [ 1.430071] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.430091] Freeing unused kernel memory: 880k freed [ 1.430361] Write protecting the kernel read-only data: 7696k [ 1.448605] udev: starting version 151 [ 1.519562] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.519566] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.519623] alloc irq_desc for 20 on node -1 [ 1.519626] alloc kstat_irqs on node -1 [ 1.519636] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.519649] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.519760] alloc irq_desc for 25 on node -1 [ 1.519762] alloc kstat_irqs on node -1 [ 1.519774] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X [ 1.525637] usb 5-1: configuration #1 chosen from 1 choice [ 1.580188] usbcore: registered new interface driver hiddev [ 1.594699] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3 [ 1.594876] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.2-1/input0 [ 1.594929] FDC 0 is a post-1991 82077 [ 1.617739] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4 [ 1.617876] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.2-1/input1 [ 1.617908] usbcore: registered new interface driver usbhid [ 1.617911] usbhid: v2.6:USB HID core driver [ 1.663054] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:09:92:6b:b7 [ 1.663058] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection [ 1.663085] 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: ffffff-0ff [ 1.810051] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 1.931961] EXT4-fs (sdb5): mounted filesystem with ordered data mode [ 2.014657] usb 5-2: configuration #1 chosen from 1 choice [ 2.030849] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5 [ 2.030952] generic-usb 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.2-2/input0 [ 2.120142] usb 1-3.3: new high speed USB device using ehci_hcd and address 5 [ 2.240994] usb 1-3.3: configuration #1 chosen from 1 choice [ 2.320131] usb 1-3.4: new full speed USB device using ehci_hcd and address 6 [ 2.433656] usb 1-3.4: configuration #1 chosen from 1 choice [ 2.510126] usb 1-3.5: new full speed USB device using ehci_hcd and address 7 [ 2.621639] usb 1-3.5: configuration #1 chosen from 1 choice [ 9.152898] udev: starting version 151 [ 9.177002] Adding 1172704k swap on /dev/sdb6. Priority:-1 extents:1 across:1172704k [ 9.202656] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 9.203032] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 9.257052] lp: driver loaded but no devices found [ 9.271423] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 9.290504] [drm] Initialized drm 1.1.0 20060810 [ 9.497312] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.498098] dell-wmi: No known WMI GUID found [ 9.506621] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.506627] i915 0000:00:02.0: setting latency timer to 64 [ 9.510863] Initializing USB Mass Storage driver... [ 9.517458] Linux video capture interface: v2.00 [ 9.520304] type=1505 audit(1282497129.554:2): operation="profile_load" pid=586 name="/sbin/dhclient3" [ 9.520313] gspca: main v2.7.0 registered [ 9.520991] type=1505 audit(1282497129.554:3): operation="profile_load" pid=586 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.521217] gspca: probing 046d:092e [ 9.521371] type=1505 audit(1282497129.554:4): operation="profile_load" pid=586 name="/usr/lib/connman/scripts/dhclient-script" [ 9.525060] scsi4 : SCSI emulation for USB Mass Storage devices [ 9.537480] usb-storage: device found at 5 [ 9.537483] usb-storage: waiting for device to settle before scanning [ 9.540159] gspca: probe ok [ 9.540185] usbcore: registered new interface driver spca561 [ 9.540188] spca561: registered [ 9.542218] usb-storage: probe of 1-3.4:1.0 failed with error -5 [ 9.542264] usbcore: registered new interface driver usb-storage [ 9.542267] USB Mass Storage support registered. [ 9.543200] mtrr: no more MTRRs available [ 9.543204] [drm] MTRR allocation failed. Graphics performance may suffer. [ 9.550818] alloc irq_desc for 26 on node -1 [ 9.550822] alloc kstat_irqs on node -1 [ 9.550832] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 9.550840] [drm] set up 7M of stolen space [ 9.551585] [drm] initialized overlay support [ 9.645427] usb 1-3.4: USB disconnect, address 6 [ 9.744630] fb0: inteldrmfb frame buffer device [ 9.744633] registered panic notifier [ 9.744827] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.744888] alloc irq_desc for 22 on node -1 [ 9.744890] alloc kstat_irqs on node -1 [ 9.744898] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.744942] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.750005] vga16fb: initializing [ 9.750012] vga16fb: mapped to 0xffff8800000a0000 [ 9.750017] vga16fb: not registering due to another framebuffer present [ 9.811087] type=1505 audit(1282497129.844:5): operation="profile_load" pid=716 name="/usr/share/gdm/guest-session/Xsession" [ 9.813060] type=1505 audit(1282497129.844:6): operation="profile_replace" pid=717 name="/sbin/dhclient3" [ 9.813960] type=1505 audit(1282497129.844:7): operation="profile_replace" pid=717 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.814375] type=1505 audit(1282497129.844:8): operation="profile_replace" pid=717 name="/usr/lib/connman/scripts/dhclient-script" [ 9.818483] type=1505 audit(1282497129.844:9): operation="profile_load" pid=718 name="/usr/bin/evince" [ 9.829108] type=1505 audit(1282497129.854:10): operation="profile_load" pid=718 name="/usr/bin/evince-previewer" [ 9.834549] type=1505 audit(1282497129.864:11): operation="profile_load" pid=718 name="/usr/bin/evince-thumbnailer" [ 9.869475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 9.885598] Console: switching to colour frame buffer device 180x56 [ 10.190262] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X [ 10.260095] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X [ 10.260701] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.660435] ppdev: user-space parallel port driver [ 10.963189] usb 1-3.4: new full speed USB device using ehci_hcd and address 8 [ 11.085300] CPU0 attaching NULL sched-domain. [ 11.085308] CPU1 attaching NULL sched-domain. [ 11.140098] CPU0 attaching sched-domain: [ 11.140103] domain 0: span 0-1 level MC [ 11.140105] groups: 0 1 [ 11.140112] CPU1 attaching sched-domain: [ 11.140114] domain 0: span 0-1 level MC [ 11.140117] groups: 1 0 [ 11.175061] usb 1-3.4: configuration #1 chosen from 1 choice [ 11.185273] usbcore: registered new interface driver usbserial [ 11.185289] USB Serial support registered for generic [ 11.185329] usbcore: registered new interface driver usbserial_generic [ 11.185332] usbserial: USB Serial Driver core [ 11.188526] USB Serial support registered for Sierra USB modem [ 11.188568] sierra 1-3.4:1.0: Sierra USB modem converter detected [ 11.189237] usb 1-3.4: Sierra USB modem converter now attached to ttyUSB0 [ 11.189289] usb 1-3.4: Sierra USB modem converter now attached to ttyUSB1 [ 11.189343] usb 1-3.4: Sierra USB modem converter now attached to ttyUSB2 [ 11.189362] usbcore: registered new interface driver sierra [ 11.189364] sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems [ 12.442770] CPU0 attaching NULL sched-domain. [ 12.442779] CPU1 attaching NULL sched-domain. [ 12.500152] CPU0 attaching sched-domain: [ 12.500159] domain 0: span 0-1 level MC [ 12.500164] groups: 0 1 [ 12.500178] CPU1 attaching sched-domain: [ 12.500180] domain 0: span 0-1 level MC [ 12.500183] groups: 1 0 [ 14.531522] usb-storage: device scan complete [ 14.531999] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS [ 14.532358] scsi 4:0:0:1: CD-ROM SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 [ 14.532893] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 14.539121] sr1: scsi3-mmc drive: 48x/48x tray [ 14.539281] sr 4:0:0:1: Attached scsi CD-ROM sr1 [ 14.539780] sr 4:0:0:1: Attached scsi generic sg4 type 5 [ 14.541177] sd 4:0:0:0: [sdc] 7843839 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 14.541738] sd 4:0:0:0: [sdc] Write Protect is off [ 14.541741] sd 4:0:0:0: [sdc] Mode Sense: 45 00 00 08 [ 14.541744] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 14.544860] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 14.544869] sdc: sdc1 < sdc5 > [ 14.551365] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 14.551372] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 105.649117] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 105.664768] ISOFS: changing to secondary root [ 748.439849] PPP BSD Compression module registered [ 748.463998] PPP Deflate Compression module registered [ 1876.809421] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1876.811809] SGI XFS Quota Management subsystem [ 1876.817307] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1876.843815] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 1876.867776] QNX4 filesystem 0.2.3 registered. [ 1876.907481] Btrfs loaded