[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-36-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Thu Jun 20 15:22:35 UTC 2013 (Ubuntu 3.5.0-36.57~precise1-generic 3.5.7.14) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ef8efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ef8f000-0x000000007f58efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f58f000-0x000000007f68efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f68f000-0x000000007f6eefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f6ef000-0x000000007f6effff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS SPCDV10L.91A.0044.2012.0917.1431 09/17/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 4 base 07F6F0000 mask FFFFF0000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x3626a000-0x3712cfff] [ 0.000000] ACPI: RSDP 000f0100 00024 (v02 JPSCSA) [ 0.000000] ACPI: XSDT 7f6ee120 0008C (v01 JPSCSA _JPSCSA_ 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 7f6e3000 000F4 (v03 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 7f6e5000 06577 (v02 JPSCSA _JPSCSA_ 00000001 INTL 20061109) [ 0.000000] ACPI: FACS 7f645000 00040 [ 0.000000] ACPI: SLIC 7f6ed000 00176 (v01 JPSCSA _JPSCSA_ 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 7f6ec000 0043E (v01 JPSCSA PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 7f6e2000 00038 (v01 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 7f6e1000 00078 (v01 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 7f6e0000 0003C (v01 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: TCPA 7f6df000 00032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: SSDT 7f6de000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 7f6dd000 0003E (v01 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 7f6dc000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 7f6db000 00055 (v03 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 7f6da000 000CE (v01 JPSCSA IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 7f6d9000 0013E (v01 JPSCSA _JPSCSA_ 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1146MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x7f6effff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x7ef8efff] [ 0.000000] node 0: [mem 0x7f6ef000-0x7f6effff] [ 0.000000] On node 0 totalpages: 519965 [ 0.000000] free_area_init_node: node 0, pgdat c18c6540, node_mem_map f527a200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2294 pages used for memmap [ 0.000000] HighMem zone: 289436 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb9000 s34176 r0 d23168 u57344 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515887 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-36-generic root=UUID=366917cf-0047-48f0-97cc-42fe8adc098e ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4175616 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f6f0) [ 0.000000] Memory: 2032504k/2087872k available (6054k kernel code, 47356k reserved, 2982k data, 760k init, 1166920k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc18d4000 - 0xc1992000 ( 760 kB) [ 0.000000] .data : 0xc15e99d5 - 0xc18d33c0 (2982 kB) [ 0.000000] .text : 0xc1000000 - 0xc15e99d5 (6054 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f4c0a000 soft=f4c0c000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.016000] TSC: Unable to calibrate against PIT [ 0.016000] TSC: using HPET reference calibration [ 0.016000] Detected 1595.997 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=6383988) [ 0.000014] pid_max: default: 32768 minimum: 301 [ 0.000069] Security Framework initialized [ 0.000105] AppArmor: AppArmor initialized [ 0.000109] Yama: becoming mindful. [ 0.000235] Mount-cache hash table entries: 512 [ 0.000687] Initializing cgroup subsys cpuacct [ 0.000694] Initializing cgroup subsys memory [ 0.000712] Initializing cgroup subsys devices [ 0.000717] Initializing cgroup subsys freezer [ 0.000722] Initializing cgroup subsys blkio [ 0.000727] Initializing cgroup subsys perf_event [ 0.000790] CPU: Physical Processor ID: 0 [ 0.000795] CPU: Processor Core ID: 0 [ 0.000801] mce: CPU supports 5 MCE banks [ 0.000818] CPU0: Thermal monitoring enabled (TM2) [ 0.000825] using mwait in idle threads. [ 0.005084] ACPI: Core revision 20120320 [ 0.022941] ftrace: allocating 27142 entries in 54 pages [ 0.051344] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.051883] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.091535] CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz stepping 01 [ 0.198243] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver. [ 0.198256] ... version: 3 [ 0.198260] ... bit width: 40 [ 0.198263] ... generic registers: 2 [ 0.198267] ... value mask: 000000ffffffffff [ 0.198271] ... max period: 000000007fffffff [ 0.198274] ... fixed-purpose events: 3 [ 0.198278] ... event mask: 0000000700000003 [ 0.198720] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.199052] CPU 1 irqstacks, hard=f4d0c000 soft=f4d0e000 [ 0.209122] Initializing CPU#1 [ 0.199059] Booting Node 0, Processors #1 [ 0.212384] CPU 2 irqstacks, hard=f4d20000 soft=f4d22000 [ 0.222351] Initializing CPU#2 [ 0.212394] #2 [ 0.225639] CPU 3 irqstacks, hard=f4d52000 soft=f4d54000 [ 0.225646] #3 Ok. [ 0.235606] Initializing CPU#3 [ 0.238765] Brought up 4 CPUs [ 0.238775] Total of 4 processors activated (12767.97 BogoMIPS). [ 0.240269] devtmpfs: initialized [ 0.240685] EVM: security.selinux [ 0.240690] EVM: security.SMACK64 [ 0.240694] EVM: security.capability [ 0.240895] PM: Registering ACPI NVS region [mem 0x7f58f000-0x7f68efff] (1048576 bytes) [ 0.243911] dummy: [ 0.243973] RTC time: 2:00:13, date: 07/17/13 [ 0.244076] NET: Registered protocol family 16 [ 0.244427] Trying to unpack rootfs image as initramfs... [ 0.244557] EISA bus registered [ 0.244811] ACPI: bus type pci registered [ 0.245025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.245035] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.245040] PCI: Using MMCONFIG for extended config space [ 0.245046] PCI: Using configuration type 1 for base access [ 0.250007] bio: create slab at 0 [ 0.250990] ACPI: Added _OSI(Module Device) [ 0.251000] ACPI: Added _OSI(Processor Device) [ 0.251007] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.251014] ACPI: Added _OSI(Processor Aggregator Device) [ 0.256114] ACPI: EC: Look up EC in DSDT [ 0.261398] ACPI: Executed 1 blocks of module-level executable AML code [ 0.326296] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.328390] ACPI: SSDT 7f57ca98 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.329685] ACPI: Dynamic OEM Table Load: [ 0.329698] ACPI: SSDT (null) 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.330308] ACPI: SSDT 7f57b718 006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.331578] ACPI: Dynamic OEM Table Load: [ 0.331590] ACPI: SSDT (null) 006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.419155] ACPI: SSDT 7f57ce18 001CF (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.420519] ACPI: Dynamic OEM Table Load: [ 0.420533] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.454432] ACPI: SSDT 7f57af18 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.455713] ACPI: Dynamic OEM Table Load: [ 0.455726] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.599222] ACPI: Interpreter enabled [ 0.599245] ACPI: (supports S0 S1 S3 S4 S5) [ 0.599314] ACPI: Using IOAPIC for interrupt routing [ 0.653053] ACPI: Power Resource [FN00] (off) [ 0.654285] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.654977] ACPI: No dock devices found. [ 0.654997] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.655738] \_SB_.PCI0:_OSC invalid UUID [ 0.655745] _OSC request data:1 8 0 [ 0.655763] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.656637] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.656650] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.656660] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.656670] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.656679] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff] [ 0.656688] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.656698] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0x7fffffff] [ 0.656707] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.656850] PCI host bridge to bus 0000:00 [ 0.656861] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.656870] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.656880] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.656889] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.656898] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff] [ 0.656910] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.656920] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff] [ 0.656929] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.656960] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000 [ 0.657069] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000 [ 0.657097] pci 0000:00:02.0: reg 10: [mem 0x80200000-0x802fffff] [ 0.657114] pci 0000:00:02.0: reg 14: [io 0x40d0-0x40d7] [ 0.657296] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.657340] pci 0000:00:1b.0: reg 10: [mem 0x80300000-0x80303fff 64bit] [ 0.657516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.657579] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.657773] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.657867] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.658050] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.658117] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.658309] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.658375] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.658576] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.658647] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.658747] pci 0000:00:1d.0: reg 20: [io 0x40a0-0x40bf] [ 0.658830] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.658928] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f] [ 0.659011] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.659107] pci 0000:00:1d.2: reg 20: [io 0x4060-0x407f] [ 0.659188] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.659286] pci 0000:00:1d.3: reg 20: [io 0x4040-0x405f] [ 0.659396] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.659447] pci 0000:00:1d.7: reg 10: [mem 0x80304400-0x803047ff] [ 0.659628] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.659699] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.659863] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.660094] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 [ 0.660141] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf] [ 0.660169] pci 0000:00:1f.2: reg 14: [io 0x40dc-0x40df] [ 0.660198] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7] [ 0.660225] pci 0000:00:1f.2: reg 1c: [io 0x40d8-0x40db] [ 0.660250] pci 0000:00:1f.2: reg 20: [io 0x4020-0x402f] [ 0.660276] pci 0000:00:1f.2: reg 24: [mem 0x80304000-0x803043ff] [ 0.660374] pci 0000:00:1f.2: PME# supported from D3hot [ 0.660420] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.660516] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.660723] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.660762] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff] [ 0.660815] pci 0000:01:00.0: reg 18: [mem 0x80004000-0x80004fff 64bit pref] [ 0.660856] pci 0000:01:00.0: reg 20: [mem 0x80000000-0x80003fff 64bit pref] [ 0.660990] pci 0000:01:00.0: supports D1 D2 [ 0.661000] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.661106] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.661121] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.661147] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x800fffff 64bit pref] [ 0.661284] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000 [ 0.661323] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.661379] pci 0000:02:00.0: reg 18: [mem 0x80100000-0x80103fff 64bit] [ 0.661540] pci 0000:02:00.0: supports D1 D2 [ 0.661551] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.665875] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.665894] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.665909] pci 0000:00:1c.1: bridge window [mem 0x80100000-0x801fffff] [ 0.666031] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.666161] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.666330] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.666360] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.666370] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.666379] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.666389] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.666398] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) [ 0.666408] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.666417] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff] (subtractive decode) [ 0.666427] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.666486] pci_bus 0000:00: on NUMA node 0 [ 0.666502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.666779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.667043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.667183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.667319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.667453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.667604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.667946] \_SB_.PCI0:_OSC invalid UUID [ 0.667954] _OSC request data:1 1f 0 [ 0.667971] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.668124] \_SB_.PCI0:_OSC invalid UUID [ 0.668130] _OSC request data:1 0 1d [ 0.668145] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.668150] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.686913] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.687063] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.687204] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.687349] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.687488] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.687629] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.687768] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.687906] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.688194] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.688214] vgaarb: loaded [ 0.688219] vgaarb: bridge control possible 0000:00:02.0 [ 0.688715] SCSI subsystem initialized [ 0.688875] libata version 3.00 loaded. [ 0.688943] ACPI: bus type usb registered [ 0.689025] usbcore: registered new interface driver usbfs [ 0.689053] usbcore: registered new interface driver hub [ 0.689155] usbcore: registered new device driver usb [ 0.689412] PCI: Using ACPI for IRQ routing [ 0.704643] PCI: pci_cache_line_size set to 64 bytes [ 0.704779] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.704786] e820: reserve RAM buffer [mem 0x7ef8f000-0x7fffffff] [ 0.704793] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff] [ 0.705047] NetLabel: Initializing [ 0.705053] NetLabel: domain hash size = 128 [ 0.705056] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.705081] NetLabel: unlabeled traffic allowed by default [ 0.705293] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.705305] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.707341] Switching to clocksource hpet [ 0.726089] AppArmor: AppArmor Filesystem Enabled [ 0.726167] pnp: PnP ACPI init [ 0.726211] ACPI: bus type pnp registered [ 0.726626] pnp 00:00: [bus 00-ff] [ 0.726638] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.726644] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.726651] pnp 00:00: [io 0x0d00-0xffff window] [ 0.726658] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.726664] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.726671] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.726677] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.726684] pnp 00:00: [mem 0x7f800000-0x7fffffff window] [ 0.726691] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.726856] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.726988] pnp 00:01: [io 0x0000-0x001f] [ 0.726995] pnp 00:01: [io 0x0081-0x0091] [ 0.727001] pnp 00:01: [io 0x0093-0x009f] [ 0.727007] pnp 00:01: [io 0x00c0-0x00df] [ 0.727014] pnp 00:01: [dma 4] [ 0.727078] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.727105] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.727164] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.727410] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.727483] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.727518] pnp 00:04: [io 0x00f0] [ 0.727543] pnp 00:04: [irq 13] [ 0.727606] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.727640] pnp 00:05: [io 0x002e-0x002f] [ 0.727647] pnp 00:05: [io 0x004e-0x004f] [ 0.727653] pnp 00:05: [io 0x0061] [ 0.727659] pnp 00:05: [io 0x0063] [ 0.727665] pnp 00:05: [io 0x0065] [ 0.727670] pnp 00:05: [io 0x0067] [ 0.727676] pnp 00:05: [io 0x0070] [ 0.727682] pnp 00:05: [io 0x0080] [ 0.727688] pnp 00:05: [io 0x0092] [ 0.727694] pnp 00:05: [io 0x00b2-0x00b3] [ 0.727700] pnp 00:05: [io 0x0680-0x069f] [ 0.727706] pnp 00:05: [io 0x1000-0x100f] [ 0.727712] pnp 00:05: [io 0xffff] [ 0.727718] pnp 00:05: [io 0xffff] [ 0.727724] pnp 00:05: [io 0x0400-0x047f] [ 0.727730] pnp 00:05: [io 0x0500-0x057f] [ 0.727736] pnp 00:05: [io 0x0600-0x061f] [ 0.727864] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.727873] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.727880] system 00:05: [io 0xffff] has been reserved [ 0.727888] system 00:05: [io 0xffff] has been reserved [ 0.727895] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.727902] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.727909] system 00:05: [io 0x0600-0x061f] has been reserved [ 0.727920] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.727947] pnp 00:06: [io 0x0070-0x0077] [ 0.727962] pnp 00:06: [irq 8] [ 0.728027] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.728121] pnp 00:07: [io 0x0060] [ 0.728128] pnp 00:07: [io 0x0064] [ 0.728141] pnp 00:07: [irq 1] [ 0.728209] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.728296] pnp 00:08: [irq 12] [ 0.728367] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.728447] pnp 00:09: [mem 0xfed40000-0xfed44fff] [ 0.728515] pnp 00:09: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active) [ 0.729209] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.729217] pnp 00:0a: [mem 0x00000000-0x00003fff] [ 0.729223] pnp 00:0a: [mem 0x00000000-0x00000fff] [ 0.729230] pnp 00:0a: [mem 0x00000000-0x00000fff] [ 0.729236] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.729243] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] [ 0.729386] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.729395] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved [ 0.729403] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved [ 0.729410] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved [ 0.729418] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.729427] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.729783] pnp: PnP ACPI: found 11 devices [ 0.729790] ACPI: ACPI bus type pnp unregistered [ 0.729797] PnPBIOS: Disabled by ACPI PNP [ 0.770334] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01-01] add_size 400000 [ 0.770359] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.770381] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000 [ 0.770389] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000 [ 0.770397] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000 [ 0.770422] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 [ 0.770431] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000 [ 0.770439] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000 [ 0.770470] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.770478] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.770486] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.770493] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.770500] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.770508] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.770515] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.770522] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.770543] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80400000-0x807fffff] [ 0.770555] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref] [ 0.770566] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80a00000-0x80bfffff] [ 0.770577] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80c00000-0x80dfffff 64bit pref] [ 0.770588] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80e00000-0x80ffffff] [ 0.770599] pci 0000:00:1c.3: BAR 15: assigned [mem 0x81000000-0x811fffff 64bit pref] [ 0.770611] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff] [ 0.770621] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff] [ 0.770631] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.770641] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.770654] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x807fffff] [ 0.770665] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x800fffff 64bit pref] [ 0.770680] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.770688] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.770701] pci 0000:00:1c.1: bridge window [mem 0x80100000-0x801fffff] [ 0.770712] pci 0000:00:1c.1: bridge window [mem 0x80800000-0x809fffff 64bit pref] [ 0.770727] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.770735] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.770748] pci 0000:00:1c.2: bridge window [mem 0x80a00000-0x80bfffff] [ 0.770759] pci 0000:00:1c.2: bridge window [mem 0x80c00000-0x80dfffff 64bit pref] [ 0.770773] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.770781] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.770794] pci 0000:00:1c.3: bridge window [mem 0x80e00000-0x80ffffff] [ 0.770805] pci 0000:00:1c.3: bridge window [mem 0x81000000-0x811fffff 64bit pref] [ 0.770820] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.770909] pci 0000:00:1c.2: enabling device (0000 -> 0003) [ 0.770937] pci 0000:00:1c.3: enabling device (0000 -> 0003) [ 0.770968] pci 0000:00:1e.0: setting latency timer to 64 [ 0.770979] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.770985] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.770992] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.770999] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.771005] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff] [ 0.771012] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff] [ 0.771019] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff] [ 0.771025] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff] [ 0.771032] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.771039] pci_bus 0000:01: resource 1 [mem 0x80400000-0x807fffff] [ 0.771046] pci_bus 0000:01: resource 2 [mem 0x80000000-0x800fffff 64bit pref] [ 0.771052] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.771059] pci_bus 0000:02: resource 1 [mem 0x80100000-0x801fffff] [ 0.771065] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref] [ 0.771072] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.771079] pci_bus 0000:03: resource 1 [mem 0x80a00000-0x80bfffff] [ 0.771086] pci_bus 0000:03: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref] [ 0.771092] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.771099] pci_bus 0000:04: resource 1 [mem 0x80e00000-0x80ffffff] [ 0.771105] pci_bus 0000:04: resource 2 [mem 0x81000000-0x811fffff 64bit pref] [ 0.771112] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.771119] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.771125] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.771132] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.771138] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff] [ 0.771145] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff] [ 0.771152] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff] [ 0.771158] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff] [ 0.771238] NET: Registered protocol family 2 [ 0.771408] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.771678] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.772662] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.773140] TCP: Hash tables configured (established 131072 bind 65536) [ 0.773146] TCP: reno registered [ 0.773155] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.773177] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.773364] NET: Registered protocol family 1 [ 0.773416] pci 0000:00:02.0: Boot video device [ 0.773732] PCI: CLS 64 bytes, default 64 [ 0.774942] audit: initializing netlink socket (disabled) [ 0.774966] type=2000 audit(1374026413.664:1): initialized [ 0.827959] highmem bounce pool size: 64 pages [ 0.827997] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.832111] VFS: Disk quotas dquot_6.5.2 [ 0.832243] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.833589] fuse init (API version 7.19) [ 0.833820] msgmni has been set to 1690 [ 0.835109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.835208] io scheduler noop registered [ 0.835215] io scheduler deadline registered (default) [ 0.835278] io scheduler cfq registered [ 0.835657] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.835902] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.836124] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.836346] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.836537] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.836578] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.836731] intel_idle: does not run on family 6 model 54 [ 0.837817] ACPI: AC Adapter [AC0] (off-line) [ 0.837994] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0 [ 0.838036] ACPI: Lid Switch [LID] [ 0.838144] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1 [ 0.838158] ACPI: Power Button [PWRB] [ 0.838260] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.838269] ACPI: Sleep Button [SLPB] [ 0.838368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.838376] ACPI: Power Button [PWRF] [ 0.838519] ACPI: Fan [FAN0] (off) [ 0.838651] ACPI: Requesting acpi_cpufreq [ 0.927347] Freeing initrd memory: 15116k freed [ 0.943817] Monitor-Mwait will be used to enter C-1 state [ 0.943842] Monitor-Mwait will be used to enter C-2 state [ 0.943869] Monitor-Mwait will be used to enter C-3 state [ 0.943891] Monitor-Mwait will be used to enter C-3 state [ 0.943938] ACPI: acpi_idle registered with cpuidle [ 0.956929] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.956940] ACPI: Thermal Zone [TZ01] (46 C) [ 0.956998] ACPI: Battery Slot [BAT1] (battery present) [ 0.957071] GHES: HEST is not enabled! [ 0.957241] isapnp: Scanning for PnP cards... [ 0.957312] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.961519] Linux agpgart interface v0.103 [ 0.966265] brd: module loaded [ 0.968738] loop: module loaded [ 0.969977] Fixed MDIO Bus: probed [ 0.970135] tun: Universal TUN/TAP device driver, 1.6 [ 0.970140] tun: (C) 1999-2004 Max Krasnyansky [ 0.970263] PPP generic driver version 2.4.2 [ 0.970392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.970515] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.970526] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.970545] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.970594] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.970619] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.974503] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.974552] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80304400 [ 0.983144] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.983212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.983221] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.983229] usb usb1: Product: EHCI Host Controller [ 0.983237] usb usb1: Manufacturer: Linux 3.5.0-36-generic ehci_hcd [ 0.983244] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.983620] hub 1-0:1.0: USB hub found [ 0.983636] hub 1-0:1.0: 8 ports detected [ 0.983860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.983920] uhci_hcd: USB Universal Host Controller Interface driver [ 0.983986] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.983997] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.984017] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.984070] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0 [ 0.984170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.984180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.984187] usb usb2: Product: UHCI Host Controller [ 0.984195] usb usb2: Manufacturer: Linux 3.5.0-36-generic uhci_hcd [ 0.984203] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.984567] hub 2-0:1.0: USB hub found [ 0.984583] hub 2-0:1.0: 2 ports detected [ 0.984767] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.984778] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.984794] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.984875] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080 [ 0.984970] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.984979] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.984987] usb usb3: Product: UHCI Host Controller [ 0.984995] usb usb3: Manufacturer: Linux 3.5.0-36-generic uhci_hcd [ 0.985002] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.985367] hub 3-0:1.0: USB hub found [ 0.985381] hub 3-0:1.0: 2 ports detected [ 0.985570] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.985581] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.985597] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.985672] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 [ 0.985771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.985780] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.985788] usb usb4: Product: UHCI Host Controller [ 0.985796] usb usb4: Manufacturer: Linux 3.5.0-36-generic uhci_hcd [ 0.985804] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.986156] hub 4-0:1.0: USB hub found [ 0.986170] hub 4-0:1.0: 2 ports detected [ 0.986354] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.986365] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.986381] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.986452] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040 [ 0.986545] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.986554] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.986562] usb usb5: Product: UHCI Host Controller [ 0.986569] usb usb5: Manufacturer: Linux 3.5.0-36-generic uhci_hcd [ 0.986577] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.986928] hub 5-0:1.0: USB hub found [ 0.986960] hub 5-0:1.0: 2 ports detected [ 0.987376] usbcore: registered new interface driver libusual [ 0.987510] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.991578] i8042: Detected active multiplexing controller, rev 1.1 [ 0.993206] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.993229] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.993314] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.993395] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.993471] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.993806] mousedev: PS/2 mouse device common for all mice [ 0.994311] rtc_cmos 00:06: RTC can wake from S4 [ 0.994569] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.994624] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.994772] device-mapper: uevent: version 1.0.3 [ 0.994963] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.995018] EISA: Probing bus 0 at eisa.0 [ 0.995025] EISA: Cannot allocate resource for mainboard [ 0.995031] Cannot allocate resource for EISA slot 1 [ 0.995036] Cannot allocate resource for EISA slot 2 [ 0.995042] Cannot allocate resource for EISA slot 3 [ 0.995047] Cannot allocate resource for EISA slot 4 [ 0.995052] Cannot allocate resource for EISA slot 5 [ 0.995057] Cannot allocate resource for EISA slot 6 [ 0.995063] Cannot allocate resource for EISA slot 7 [ 0.995096] Cannot allocate resource for EISA slot 8 [ 0.995102] EISA: Detected 0 cards. [ 0.995436] cpuidle: using governor ladder [ 0.995851] cpuidle: using governor menu [ 0.995857] EFI Variables Facility v0.08 2004-May-17 [ 0.996480] ashmem: initialized [ 0.996828] TCP: cubic registered [ 0.997170] NET: Registered protocol family 10 [ 0.997696] NET: Registered protocol family 17 [ 0.997765] Key type dns_resolver registered [ 0.997918] Using IPI No-Shortcut mode [ 0.998213] PM: Hibernation image not present or could not be loaded. [ 0.998242] registered taskstats version 1 [ 1.004718] Key type trusted registered [ 1.010318] Key type encrypted registered [ 1.016922] Magic number: 5:453:5 [ 1.017139] rtc_cmos 00:06: setting system clock to 2013-07-17 02:00:14 UTC (1374026414) [ 1.019583] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.019591] EDD information not available. [ 1.032355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.199107] ACPI: Battery Slot [BAT1] (battery present) [ 1.311489] isapnp: No Plug & Play device found [ 1.311704] Freeing unused kernel memory: 760k freed [ 1.312404] Write protecting the kernel text: 6056k [ 1.312487] Write protecting the kernel read-only data: 2476k [ 1.312491] NX-protecting the kernel data: 4184k [ 1.350915] usb 1-3: new high-speed USB device number 3 using ehci_hcd [ 1.360504] udevd[101]: starting version 175 [ 1.449448] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.449674] r8169 0000:01:00.0: irq 44 for MSI/MSI-X [ 1.450243] r8169 0000:01:00.0: eth0: RTL8105e at 0xf8440000, ec:a8:6b:11:d6:92, XID 00a00000 IRQ 44 [ 1.483789] usb 1-3: New USB device found, idVendor=187f, idProduct=0600 [ 1.483804] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.483814] usb 1-3: Product: MDTV Receiver [ 1.483826] usb 1-3: Manufacturer: MDTV Receiver [ 1.536321] ahci 0000:00:1f.2: version 3.0 [ 1.536488] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.536598] ahci: SSS flag set, parallel bus scan disabled [ 1.536673] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.536687] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 1.536701] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.546243] scsi0 : ahci [ 1.550190] scsi1 : ahci [ 1.551593] scsi2 : ahci [ 1.551952] scsi3 : ahci [ 1.552182] ata1: SATA max UDMA/133 abar m1024@0x80304000 port 0x80304100 irq 45 [ 1.552195] ata2: SATA max UDMA/133 abar m1024@0x80304000 port 0x80304180 irq 45 [ 1.552202] ata3: DUMMY [ 1.552208] ata4: DUMMY [ 1.594595] usb 1-7: new high-speed USB device number 4 using ehci_hcd [ 1.770971] Refined TSC clocksource calibration: 1595.999 MHz. [ 1.770994] Switching to clocksource tsc [ 1.818424] usb 1-7: New USB device found, idVendor=5986, idProduct=051c [ 1.818435] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.818442] usb 1-7: Product: USB Camera [ 1.818448] usb 1-7: Manufacturer: Generic [ 1.818454] usb 1-7: SerialNumber: 200901010001 [ 1.870898] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.874060] ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 1.874073] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.877914] ata1.00: configured for UDMA/133 [ 1.878309] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5 [ 1.878930] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.878941] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.878974] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.879168] sd 0:0:0:0: [sda] Write Protect is off [ 1.879180] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.879307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.930836] usb 1-8: new high-speed USB device number 5 using ehci_hcd [ 1.950033] sda: sda1 sda2 < sda5 > [ 1.951166] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.079305] usb 1-8: New USB device found, idVendor=0bda, idProduct=0138 [ 2.079316] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.079323] usb 1-8: Product: USB2.0-CRW [ 2.079329] usb 1-8: Manufacturer: Generic [ 2.079334] usb 1-8: SerialNumber: 20090516388200000 [ 2.091965] Initializing USB Mass Storage driver... [ 2.092206] usbcore: registered new interface driver usb-storage [ 2.092213] USB Mass Storage support registered. [ 2.198586] ata2: SATA link down (SStatus 0 SControl 300) [ 2.216538] scsi4 : usb-storage 1-8:1.0 [ 2.216833] usbcore: registered new interface driver ums-realtek [ 2.325989] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 2.499825] usb 2-1: New USB device found, idVendor=0458, idProduct=003a [ 2.499836] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.499843] usb 2-1: Product: Optical Mouse [ 2.499849] usb 2-1: Manufacturer: Genius [ 2.534445] usbcore: registered new interface driver usbhid [ 2.534455] usbhid: USB HID core driver [ 2.541689] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5 [ 2.542182] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.911358] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.199956] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 4.201651] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 5.181749] sd 4:0:0:0: [sdb] 7729152 512-byte logical blocks: (3.95 GB/3.68 GiB) [ 5.182658] sd 4:0:0:0: [sdb] Write Protect is off [ 5.182669] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 5.183596] sd 4:0:0:0: [sdb] No Caching mode page present [ 5.183608] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 5.187804] sd 4:0:0:0: [sdb] No Caching mode page present [ 5.187817] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 5.189514] sdb: sdb1 [ 5.193440] sd 4:0:0:0: [sdb] No Caching mode page present [ 5.193452] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 5.193465] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 23.546990] Adding 2078716k swap on /dev/sda5. Priority:-1 extents:1 across:2078716k [ 23.576961] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.638285] udevd[366]: starting version 175 [ 23.718823] lp: driver loaded but no devices found [ 23.791304] [drm] Initialized drm 1.1.0 20060810 [ 23.818918] gma500 0000:00:02.0: setting latency timer to 64 [ 23.819231] gma500 0000:00:02.0: irq 46 for MSI/MSI-X [ 23.839028] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 23.839228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 23.841102] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 23.841111] [drm] No driver support for vblank timestamp query. [ 23.923378] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 71) [ 23.955457] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 24.029073] cfg80211: Calling CRDA to update world regulatory domain [ 24.093891] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.093905] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.093914] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.093922] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.093929] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.093937] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.093943] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.093950] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.093957] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.093965] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.093972] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.093980] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.093988] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.093996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094004] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.094011] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094018] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.094026] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094034] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.094042] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094049] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.094057] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094063] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.094071] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094079] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.094087] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.094094] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 24.094127] cfg80211: Pending regulatory request, waiting for it to be processed... [ 24.100492] rtl8192ce: ****** This B_CUT device may not work with kernels 3.6 and earlier [ 24.100502] rtl8192ce: Using firmware rtlwifi/rtl8192cfwU_B.bin [ 24.121413] type=1400 audit(1374026437.622:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=525 comm="apparmor_parser" [ 24.128612] type=1400 audit(1374026437.626:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser" [ 24.129572] type=1400 audit(1374026437.630:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser" [ 24.211579] Linux video capture interface: v2.00 [ 24.221224] uvcvideo: Found UVC 1.00 device USB Camera (5986:051c) [ 24.230818] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input7 [ 24.231638] usbcore: registered new interface driver uvcvideo [ 24.231646] USB Video Class driver (1.1.1) [ 24.256381] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0 [ 24.256462] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0 [ 24.337454] microcode: CPU0 sig=0x30661, pf=0x8, revision=0x10c [ 24.435798] fbcon: psbfb (fb0) is primary device [ 24.752940] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 24.774512] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 24.774516] cfg80211: World regulatory domain updated: [ 24.774518] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.774524] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.774528] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.774532] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.774536] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.774539] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.774571] cfg80211: Calling CRDA for country: EC [ 24.779090] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 24.779776] rtlwifi: wireless switch is on [ 24.780182] microcode: CPU1 sig=0x30661, pf=0x8, revision=0x10c [ 24.800978] microcode: CPU2 sig=0x30661, pf=0x8, revision=0x10c [ 24.806027] microcode: CPU3 sig=0x30661, pf=0x8, revision=0x10c [ 24.812756] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.812762] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812765] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.812769] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812772] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.812776] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812780] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.812783] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812787] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.812790] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812793] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.812797] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812801] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.812804] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812808] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.812811] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812815] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.812819] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812822] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.812826] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812829] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.812833] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812836] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.812840] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812843] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.812847] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 24.812849] cfg80211: Disabling freq 2484 MHz [ 24.812856] cfg80211: Regulatory domain changed to country: EC [ 24.812858] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.812862] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 24.812866] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm) [ 24.812871] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm) [ 24.812875] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm) [ 24.815064] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 24.816859] coretemp coretemp.0: Unable to read TjMax from CPU 0 [ 24.816881] coretemp coretemp.0: Using relative temperature scale! [ 24.816909] coretemp coretemp.0: Unable to read TjMax from CPU 2 [ 24.816937] coretemp coretemp.0: Using relative temperature scale! [ 25.366917] Console: switching to colour frame buffer device 128x37 [ 25.374658] fb0: psbfb frame buffer device [ 25.374660] drm: registered panic notifier [ 25.375301] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 25.375598] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 25.411349] ppdev: user-space parallel port driver [ 25.442020] Bluetooth: Core ver 2.16 [ 25.442121] NET: Registered protocol family 31 [ 25.442128] Bluetooth: HCI device and connection manager initialized [ 25.442136] Bluetooth: HCI socket layer initialized [ 25.442141] Bluetooth: L2CAP socket layer initialized [ 25.442159] Bluetooth: SCO socket layer initialized [ 25.456785] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.456796] Bluetooth: BNEP filters: protocol multicast [ 25.480072] Bluetooth: RFCOMM TTY layer initialized [ 25.480092] Bluetooth: RFCOMM socket layer initialized [ 25.480098] Bluetooth: RFCOMM ver 1.11 [ 25.500857] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 25.504635] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 25.505206] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 25.506625] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 25.508768] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 25.508793] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \_SB_.PCI0.LPCB.EC0_.PMRG 2 (20120320/utaddress-251) [ 25.508809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.508816] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 25.508826] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 25.508840] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \SWC1 2 (20120320/utaddress-251) [ 25.508854] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.LPCB.EC0_.PMRG 3 (20120320/utaddress-251) [ 25.508869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.508878] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GBAS 1 (20120320/utaddress-251) [ 25.508892] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.EC0_.DGPC 2 (20120320/utaddress-251) [ 25.508906] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 25.508912] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 25.601012] type=1400 audit(1374026439.102:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=871 comm="apparmor_parser" [ 25.602910] type=1400 audit(1374026439.102:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser" [ 25.661593] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00833/0x240000/0xa2400 [ 25.706065] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 25.847712] init: failsafe main process (886) killed by TERM signal [ 25.850530] init: udev-fallback-graphics main process (909) terminated with status 1 [ 26.217347] type=1400 audit(1374026439.718:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=989 comm="apparmor_parser" [ 26.218006] type=1400 audit(1374026439.718:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=988 comm="apparmor_parser" [ 26.219050] type=1400 audit(1374026439.718:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=989 comm="apparmor_parser" [ 26.220017] type=1400 audit(1374026439.722:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=989 comm="apparmor_parser" [ 26.221679] type=1400 audit(1374026439.722:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=992 comm="apparmor_parser" [ 26.258409] r8169 0000:01:00.0: eth0: link down [ 26.258909] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.259922] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.611511] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.613232] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.553123] init: plymouth-stop pre-start process (1438) terminated with status 1 [ 217.560780] wlan0: authenticate with 38:60:77:16:11:44 [ 217.573315] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 217.574887] wlan0: authenticated [ 217.587028] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 217.589419] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 217.589590] wlan0: associated [ 217.590225] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 226.093659] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 15) [ 226.098922] cfg80211: All devices are disconnected, going to restore regulatory settings [ 226.098953] cfg80211: Restoring regulatory settings [ 226.099010] cfg80211: Calling CRDA to update world regulatory domain [ 226.110541] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 226.110551] cfg80211: World regulatory domain updated: [ 226.110556] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 226.110562] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 226.110567] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 226.110572] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 226.110577] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 226.110583] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 227.472587] wlan0: authenticate with 38:60:77:16:11:44 [ 227.490146] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 227.492744] wlan0: authenticated [ 227.505574] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 227.510029] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 227.510213] wlan0: associated [ 236.643606] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 7) [ 236.653825] cfg80211: All devices are disconnected, going to restore regulatory settings [ 236.653856] cfg80211: Restoring regulatory settings [ 236.653885] cfg80211: Calling CRDA to update world regulatory domain [ 236.669673] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 236.669684] cfg80211: World regulatory domain updated: [ 236.669690] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 236.669698] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 236.669705] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 236.669713] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 236.669720] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 236.669727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 237.923424] wlan0: authenticate with 38:60:77:16:11:44 [ 237.941126] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 237.942837] wlan0: authenticated [ 237.955791] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 237.958317] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 237.958524] wlan0: associated [ 246.495051] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 15) [ 246.496616] cfg80211: All devices are disconnected, going to restore regulatory settings [ 246.496631] cfg80211: Restoring regulatory settings [ 246.496644] cfg80211: Calling CRDA to update world regulatory domain [ 246.513949] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 246.513970] cfg80211: World regulatory domain updated: [ 246.513982] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 246.513998] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 246.514013] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 246.514026] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 246.514040] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 246.514054] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 247.775087] wlan0: authenticate with 38:60:77:16:11:44 [ 247.785356] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 247.788121] wlan0: authenticated [ 247.802388] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 247.805353] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 247.805530] wlan0: associated [ 255.786740] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 15) [ 255.788844] cfg80211: All devices are disconnected, going to restore regulatory settings [ 255.788876] cfg80211: Restoring regulatory settings [ 255.788904] cfg80211: Calling CRDA to update world regulatory domain [ 255.810547] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 255.810558] cfg80211: World regulatory domain updated: [ 255.810562] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 255.810568] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 255.810574] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 255.810579] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 255.810584] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 255.810589] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 257.055270] wlan0: authenticate with 38:60:77:16:11:44 [ 257.074238] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 257.076991] wlan0: authenticated [ 257.089636] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 257.092621] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 257.092788] wlan0: associated [ 265.078509] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 15) [ 265.081089] cfg80211: All devices are disconnected, going to restore regulatory settings [ 265.081121] cfg80211: Restoring regulatory settings [ 265.081153] cfg80211: Calling CRDA to update world regulatory domain [ 265.101818] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 265.101827] cfg80211: World regulatory domain updated: [ 265.101832] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 265.101838] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 265.101843] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 265.101849] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 265.101854] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 265.101859] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 266.347587] wlan0: authenticate with 38:60:77:16:11:44 [ 266.365867] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 266.367483] wlan0: authenticated [ 266.380886] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 266.383843] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 266.384021] wlan0: associated [ 274.369652] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 15) [ 274.372138] cfg80211: All devices are disconnected, going to restore regulatory settings [ 274.372168] cfg80211: Restoring regulatory settings [ 274.372199] cfg80211: Calling CRDA to update world regulatory domain [ 274.388448] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 274.388460] cfg80211: World regulatory domain updated: [ 274.388466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 274.388475] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 274.388482] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 274.388489] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 274.388496] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 274.388502] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 275.682112] wlan0: authenticate with 38:60:77:16:11:44 [ 275.697511] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 275.699039] wlan0: authenticated [ 275.712068] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 275.715009] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 275.715183] wlan0: associated [ 276.848147] wlan0: deauthenticating from 38:60:77:16:11:44 by local choice (reason=3) [ 276.891143] cfg80211: All devices are disconnected, going to restore regulatory settings [ 276.891160] cfg80211: Restoring regulatory settings [ 276.891175] cfg80211: Calling CRDA to update world regulatory domain [ 276.904870] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 276.904882] cfg80211: World regulatory domain updated: [ 276.904887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 276.904896] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 276.904904] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 276.904911] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 276.904919] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 276.904926] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 337.081801] audit_printk_skb: 45 callbacks suppressed [ 337.081824] type=1400 audit(1374026750.878:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=873 comm="cupsd" pid=873 comm="cupsd" capability=36 capname="block_suspend" [ 584.817701] wlan0: authenticate with 38:60:77:16:11:44 [ 584.834099] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 584.835670] wlan0: authenticated [ 584.848565] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 584.870131] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 584.870301] wlan0: associated [ 630.725797] wlan0: deauthenticating from 38:60:77:16:11:44 by local choice (reason=3) [ 630.829590] cfg80211: All devices are disconnected, going to restore regulatory settings [ 630.829605] cfg80211: Restoring regulatory settings [ 630.829630] cfg80211: Calling CRDA to update world regulatory domain [ 630.843282] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 630.843291] cfg80211: World regulatory domain updated: [ 630.843296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 630.843302] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 630.843307] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 630.843313] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 630.843318] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 630.843323] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 634.769350] wlan0: authenticate with 38:60:77:16:11:44 [ 634.787221] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 634.788907] wlan0: authenticated [ 634.801523] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 634.810588] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 634.810758] wlan0: associated [ 726.109866] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 7) [ 726.140159] cfg80211: All devices are disconnected, going to restore regulatory settings [ 726.140196] cfg80211: Restoring regulatory settings [ 726.140231] cfg80211: Calling CRDA to update world regulatory domain [ 726.157792] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 726.157802] cfg80211: World regulatory domain updated: [ 726.157807] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 726.157813] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 726.157818] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 726.157824] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 726.157829] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 726.157834] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 733.679846] wlan0: authenticate with 38:60:77:16:11:44 [ 733.700671] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 733.702359] wlan0: authenticated [ 733.716260] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 733.719321] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 733.719515] wlan0: associated [ 742.211232] wlan0: deauthenticating from 38:60:77:16:11:44 by local choice (reason=3) [ 742.236346] cfg80211: All devices are disconnected, going to restore regulatory settings [ 742.236380] cfg80211: Restoring regulatory settings [ 742.236472] cfg80211: Calling CRDA to update world regulatory domain [ 742.266427] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 742.266440] cfg80211: World regulatory domain updated: [ 742.266446] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 742.266454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 742.266461] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 742.266469] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 742.266476] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 742.266484] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 743.557547] wlan0: authenticate with 38:60:77:16:11:44 [ 743.575781] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 743.577598] wlan0: authenticated [ 743.590929] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 743.593955] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 743.594122] wlan0: associated [ 876.733021] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 7) [ 876.776015] cfg80211: All devices are disconnected, going to restore regulatory settings [ 876.776049] cfg80211: Restoring regulatory settings [ 876.776082] cfg80211: Calling CRDA to update world regulatory domain [ 876.801200] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 876.801221] cfg80211: World regulatory domain updated: [ 876.801315] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 876.801333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 876.801349] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 876.801382] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 876.801434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 876.801459] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 878.023678] wlan0: authenticate with 38:60:77:16:11:44 [ 878.041447] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 878.047681] wlan0: authenticated [ 878.060255] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 878.063907] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 878.064142] wlan0: associated [ 887.200719] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 7) [ 887.231883] cfg80211: All devices are disconnected, going to restore regulatory settings [ 887.231915] cfg80211: Restoring regulatory settings [ 887.231946] cfg80211: Calling CRDA to update world regulatory domain [ 887.249388] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 887.249398] cfg80211: World regulatory domain updated: [ 887.249403] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 887.249409] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 887.249414] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 887.249419] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 887.249424] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 887.249430] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 888.503608] wlan0: authenticate with 38:60:77:16:11:44 [ 888.515109] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 888.517143] wlan0: authenticated [ 888.530371] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 888.532859] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 888.533025] wlan0: associated [ 1110.375204] wlan0: deauthenticated from 38:60:77:16:11:44 (Reason: 7) [ 1110.381991] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1110.382022] cfg80211: Restoring regulatory settings [ 1110.382055] cfg80211: Calling CRDA to update world regulatory domain [ 1110.396504] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1110.396514] cfg80211: World regulatory domain updated: [ 1110.396519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1110.396525] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1110.396530] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1110.396536] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1110.396541] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1110.396546] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1111.665384] wlan0: authenticate with 38:60:77:16:11:44 [ 1111.675696] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 1111.677336] wlan0: authenticated [ 1111.691830] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 1111.895613] wlan0: associate with 38:60:77:16:11:44 (try 2/3) [ 1112.099462] wlan0: associate with 38:60:77:16:11:44 (try 3/3) [ 1112.303254] wlan0: association with 38:60:77:16:11:44 timed out [ 1118.470461] wlan0: authenticate with 38:60:77:16:11:44 [ 1118.486640] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 1118.488329] wlan0: authenticated [ 1118.501356] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 1118.504297] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x411 status=0 aid=1) [ 1118.504461] wlan0: associated [ 1403.928832] wlan0: deauthenticating from 38:60:77:16:11:44 by local choice (reason=3) [ 1403.954925] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1403.954941] cfg80211: Restoring regulatory settings [ 1403.954959] cfg80211: Calling CRDA to update world regulatory domain [ 1403.977122] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1403.977135] cfg80211: World regulatory domain updated: [ 1403.977142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1403.977151] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1403.977159] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1403.977166] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1403.977174] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1403.977182] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1405.240466] wlan0: authenticate with 00:24:a1:8f:94:6c [ 1405.252663] wlan0: send auth to 00:24:a1:8f:94:6c (try 1/3) [ 1405.254373] wlan0: authenticated [ 1405.267032] wlan0: associate with 00:24:a1:8f:94:6c (try 1/3) [ 1405.269910] wlan0: RX AssocResp from 00:24:a1:8f:94:6c (capab=0x401 status=0 aid=14) [ 1405.270075] wlan0: associated [ 1512.591175] usb 2-1: USB disconnect, device number 2 [ 2074.770130] type=1400 audit(1374028490.318:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=873 comm="cupsd" pid=873 comm="cupsd" capability=36 capname="block_suspend" [ 2350.280633] wlan0: deauthenticating from 00:24:a1:8f:94:6c by local choice (reason=3) [ 2350.304818] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2350.304831] cfg80211: Restoring regulatory settings [ 2350.304842] cfg80211: Calling CRDA to update world regulatory domain [ 2350.323534] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2350.323547] cfg80211: World regulatory domain updated: [ 2350.323553] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2350.323561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2350.323569] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2350.323577] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2350.323584] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2350.323592] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2427.718348] r8169 0000:01:00.0: eth0: link down [ 2427.719594] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2428.067664] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2485.743859] r8169 0000:01:00.0: eth0: link down [ 2485.745504] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2486.098853] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2506.341110] wlan0: authenticate with 38:60:77:16:11:44 [ 2506.358393] wlan0: send auth to 38:60:77:16:11:44 (try 1/3) [ 2506.362884] wlan0: authenticated [ 2506.376905] wlan0: associate with 38:60:77:16:11:44 (try 1/3) [ 2506.379172] wlan0: RX AssocResp from 38:60:77:16:11:44 (capab=0x401 status=0 aid=1) [ 2506.379393] wlan0: associated [ 2506.380275] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2914.098224] type=1400 audit(1374029330.347:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=873 comm="cupsd" pid=873 comm="cupsd" capability=36 capname="block_suspend" [ 3175.633022] usb 2-1: new low-speed USB device number 3 using uhci_hcd [ 3175.803493] usb 2-1: New USB device found, idVendor=0458, idProduct=003a [ 3175.803519] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3175.803539] usb 2-1: Product: Optical Mouse [ 3175.803555] usb 2-1: Manufacturer: Genius [ 3175.833535] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input13 [ 3175.834343] hid-generic 0003:0458:003A.0002: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1/input0