Ubuntu
totem package

problem with totem

Bug #99242 reported by Richard on 2007-03-31

Affects		Status	Importance	Assigned to	Milestone
	totem (Ubuntu)	Fix Released	Undecided	Unassigned

Bug Description

when i play music like wma, or stream music from the internet,
it played and then paused for a second, and then play, and then paused again for another one second, and so on.

i have no idea why it happened.

lspci -v

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
        Subsystem: ASUSTeK Computer Inc. Unknown device 817a
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 817a
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at dfd00000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at 8800 [size=8]
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Memory at dfd80000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
        Subsystem: ASUSTeK Computer Inc. Unknown device 817f
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at dfdf8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Capabilities: <access denied>

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: dff00000-dfffffff
        Capabilities: <access denied>

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 9000 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at 9400 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 9800 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at a000 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at dfdffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: dfe00000-dfefffff
        Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: bus master, medium devsel, latency 0, IRQ 22
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at ffa0 [size=16]

00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: ASUSTeK Computer Inc. Unknown device 2601
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 23
        I/O ports at b800 [size=8]
        I/O ports at b400 [size=4]
        I/O ports at b000 [size=8]
        I/O ports at a800 [size=4]
        I/O ports at a400 [size=16]
        Capabilities: <access denied>

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
        Subsystem: ASUSTeK Computer Inc. Unknown device 8179
        Flags: medium devsel, IRQ 10
        I/O ports at 0400 [size=32]

01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at c800 [size=256]
        Memory at dfeffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
        Subsystem: ASUSTeK Computer Inc. Unknown device 8226
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at dffc0000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at dffa0000 [disabled] [size=128K]
        Capabilities: <access denied>

ProblemType: Bug
Architecture: i386
Date: Sat Mar 31 08:38:26 2007
DistroRelease: Ubuntu 7.04
Uname: Linux linux 2.6.20-13-generic #2 SMP Sun Mar 25 00:21:25 UTC 2007 i686 GNU/Linux

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-03-31:

Thanks for taking the time to report this bug and helping to make Ubuntu better. Is this only true with totem? Could you please add the output of 'dmesg' after experiencing this? Thanks in advance.

Revision history for this message

Richard (lawyerchu-gmail) wrote on 2007-04-02:

Download full text (24.0 KiB)

yes, it's only true with totem.
but i also found that it only happens in the first minute, after that it plays normally.

dmesg

yes, it's only true with totem.
but i also found that it only happens in the first minute, after that it plays normally.

dmesg

[    0.000000] Linux version 2.6.20-13-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 25 00:21:25 UTC 2007 (Ubuntu 2.6.20-13.21-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6a0000 end: 000000001f7a0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001f7a0000 size: 000000000000e000 end: 000000001f7ae000 type: 3
[    0.000000] copy_e820_map() start: 000000001f7ae000 size: 0000000000032000 end: 000000001f7e0000 type: 4
[    0.000000] copy_e820_map() start: 000000001f7e0000 size: 0000000000020000 end: 000000001f800000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f7a0000 (usable)
[    0.000000]  BIOS-e820: 000000001f7a0000 - 000000001f7ae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001f7ae000 - 000000001f7e0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 503MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 128928) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   128928
[    0.000000]   HighMem    128928 ->   128928
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   128928
[    0.000000] On node 0 totalpages: 128928
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 975 pages used for memmap
[    0.000000]   Normal zone: 123857 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fafe0
[    0.000000] ACPI: RSDT (v001 A M I  OEMRSDT  0x08000625 MSFT 0x00000097) @ 0x1f7a0000
[    0.000000] ACPI: FADT (v001 A M I  OEMFACP  0x08000625 MSFT 0x00000097) @ 0x1f7a0200
[    0.000000] ACPI: MADT (v001 A M I  OEMAPIC  0x08000625 MSFT 0x00000097) @ 0x1f7a0390
[    0.000000] ACPI: OEMB (v001 A M I  AMI_OEM  0x08000625 MSFT 0x00000097) @ 0x1f7ae040
[    0.000000] ACPI: MCFG (v001 A M I  OEMMCFG  0x08000625 MSFT 0x00000097) @ 0x1f7a4b60
[    0.000000] ACPI: DSDT (v001  A0605 A0605000 0x00000000 INTL 0x02002026) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:6 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:e0380000)
[    0.000000] Detected 3066.791 MHz processor.
[   15.437750] Built 1 zonelists.  Total pages: 127921
[   15.437754] Kernel command line: root=UUID=6497a6c9-b006-468f-8e7b-5524125264f9 ro quiet splash
[   15.437905] mapped APIC to ffffd000 (fee00000)
[   15.437908] mapped IOAPIC to ffffc000 (fec00000)
[   15.437911] Enabling fast FPU save and restore... done.
[   15.437914] Enabling unmasked SIMD FPU exception support... done.
[   15.437922] Initializing CPU#0
[   15.437988] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   15.439377] Console: colour VGA+ 80x25
[   15.439580] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   15.439771] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   15.447201] Memory: 500288k/515712k available (1992k kernel code, 14892k reserved, 889k data, 328k init, 0k highmem)
[   15.447212] virtual kernel memory layout:
[   15.447213]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   15.447214]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   15.447215]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[   15.447216]     lowmem  : 0xc0000000 - 0xdf7a0000   ( 503 MB)
[   15.447217]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   15.447218]       .data : 0xc02f2184 - 0xc03d06d4   ( 889 kB)
[   15.447219]       .text : 0xc0100000 - 0xc02f2184   (1992 kB)
[   15.447222] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   15.525757] Calibrating delay using timer specific routine.. 6139.08 BogoMIPS (lpj=12278170)
[   15.525798] Security Framework v1.0.0 initialized
[   15.525802] SELinux:  Disabled at boot.
[   15.525818] Mount-cache hash table entries: 512
[   15.525942] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e41d 00000000 00000001
[   15.525951] monitor/mwait feature present.
[   15.525953] using mwait in idle threads.
[   15.525960] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   15.525962] CPU: L2 cache: 512K
[   15.525965] CPU: Hyper-Threading is disabled
[   15.525967] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 0000e41d 00000000 00000001
[   15.525977] Compat vDSO mapped to ffffe000.
[   15.525981] Remapping vsyscall page to ffffe000
[   15.525995] Checking 'hlt' instruction... OK.
[   15.541801] SMP alternatives: switching to UP code
[   15.541979] Freeing SMP alternatives: 11k freed
[   15.542180] Early unpacking initramfs... done
[   15.810079] ACPI: Core revision 20060707
[   15.810241] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   15.823665] CPU0: Intel(R) Celeron(R) D CPU 3.06GHz stepping 05
[   15.823704] Total of 1 processors activated (6139.08 BogoMIPS).
[   15.823858] ENABLING IO-APIC IRQs
[   15.824043] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   15.968594] Brought up 1 CPUs
[   15.968825] Booting paravirtualized kernel on bare hardware
[   15.968900] Time:  6:53:45  Date: 03/03/107
[   15.968926] NET: Registered protocol family 16
[   15.969016] EISA bus registered
[   15.969021] ACPI: bus type pci registered
[   15.969309] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[   15.969312] PCI: Using configuration type 1
[   15.969313] Setting up standard PCI resources
[   15.983298] ACPI: Interpreter enabled
[   15.983303] ACPI: Using IOAPIC for interrupt routing
[   15.984416] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.984425] PCI: Probing PCI hardware (bus 00)
[   15.984725] Boot video device is 0000:00:02.0
[   15.985227] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   15.985231] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   15.985790] PCI: Transparent bridge - 0000:00:1e.0
[   15.985842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.988540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   15.988862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   15.989160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   15.995647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   15.995906] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   15.996161] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   15.996414] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   15.996710] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   15.996962] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   15.997216] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   15.997470] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   15.997565] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.997579] pnp: PnP ACPI init
[   16.002442] pnp: PnP ACPI: found 17 devices
[   16.002449] PnPBIOS: Disabled by ACPI PNP
[   16.002499] PCI: Using ACPI for IRQ routing
[   16.002502] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   16.016249] NET: Registered protocol family 8
[   16.016252] NET: Registered protocol family 20
[   16.017162] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[   16.017491] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[   16.017497] PCI: Bridge: 0000:00:1c.0
[   16.017500]   IO window: e000-efff
[   16.017505]   MEM window: disabled.
[   16.017509]   PREFETCH window: disabled.
[   16.017514] PCI: Bridge: 0000:00:1c.1
[   16.017517]   IO window: d000-dfff
[   16.017523]   MEM window: dff00000-dfffffff
[   16.017527]   PREFETCH window: disabled.
[   16.017532] PCI: Bridge: 0000:00:1e.0
[   16.017535]   IO window: c000-cfff
[   16.017540]   MEM window: dfe00000-dfefffff
[   16.017544]   PREFETCH window: disabled.
[   16.017576] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.017584] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   16.017605] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   16.017611] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   16.017622] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   16.017648] NET: Registered protocol family 2
[   16.056388] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   16.056463] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   16.056540] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   16.056578] TCP: Hash tables configured (established 16384 bind 8192)
[   16.056581] TCP reno registered
[   16.068417] checking if image is initramfs... it is
[   16.593109] Freeing initrd memory: 6766k freed
[   16.593570] audit: initializing netlink socket (disabled)
[   16.593584] audit(1175583225.228:1): initialized
[   16.593703] VFS: Disk quotas dquot_6.5.1
[   16.593721] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   16.593767] io scheduler noop registered
[   16.593770] io scheduler anticipatory registered
[   16.593772] io scheduler deadline registered
[   16.593780] io scheduler cfq registered (default)
[   16.593994] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   16.594042] assign_interrupt_mode Found MSI capability
[   16.594046] Allocate Port Service[0000:00:1c.0:pcie00]
[   16.594082] Allocate Port Service[0000:00:1c.0:pcie02]
[   16.594188] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   16.594234] assign_interrupt_mode Found MSI capability
[   16.594236] Allocate Port Service[0000:00:1c.1:pcie00]
[   16.594401] isapnp: Scanning for PnP cards...
[   16.945428] isapnp: No Plug & Play device found
[   16.977930] Real Time Clock Driver v1.12ac
[   16.977982] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   16.978102] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.979064] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.979347] mice: PS/2 mouse device common for all mice
[   16.979920] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   16.980167] input: Macintosh mouse button emulation as /class/input/input0
[   16.980204] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   16.980209] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   16.980418] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   16.980421] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   16.983158] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.983165] serio: i8042 AUX port at 0x60,0x64 irq 12
[   16.983329] EISA: Probing bus 0 at eisa.0
[   16.983358] Cannot allocate resource for EISA slot 8
[   16.983360] EISA: Detected 0 cards.
[   17.013361] TCP cubic registered
[   17.013367] NET: Registered protocol family 1
[   17.013390] Using IPI No-Shortcut mode
[   17.013455] ACPI: (supports S0 S1 S3 S4 S5)
[   17.013500]   Magic number: 3:185:872
[   17.013601]   hash matches device ptytd
[   17.013714] Time: tsc clocksource has been installed.
[   17.013881] Freeing unused kernel memory: 328k freed
[   17.027660] input: AT Translated Set 2 keyboard as /class/input/input1
[   18.225348] Capability LSM initialized
[   18.262288] ACPI: Processor [CPU1] (supports 8 throttling states)
[   18.262299] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   18.689504] usbcore: registered new interface driver usbfs
[   18.689528] usbcore: registered new interface driver hub
[   18.689552] usbcore: registered new device driver usb
[   18.690441] USB Universal Host Controller Interface driver v3.0
[   18.690491] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[   18.690503] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   18.690507] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   18.690643] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   18.690673] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00009000
[   18.690782] usb usb1: configuration #1 chosen from 1 choice
[   18.690810] hub 1-0:1.0: USB hub found
[   18.690817] hub 1-0:1.0: 2 ports detected
[   18.766850] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   18.793119] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[   18.793131] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   18.793136] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   18.793157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   18.793188] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[   18.793283] usb usb2: configuration #1 chosen from 1 choice
[   18.793309] hub 2-0:1.0: USB hub found
[   18.793316] hub 2-0:1.0: 2 ports detected
[   18.875255] Floppy drive(s): fd0 is 1.44M
[   18.896876] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   18.896889] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   18.896893] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   18.896916] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   18.896946] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00009800
[   18.897038] usb usb3: configuration #1 chosen from 1 choice
[   18.897064] hub 3-0:1.0: USB hub found
[   18.897071] hub 3-0:1.0: 2 ports detected
[   18.918164] FDC 0 is a post-1991 82077
[   19.000512] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
[   19.000524] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   19.000528] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   19.000558] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   19.000588] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000a000
[   19.000680] usb usb4: configuration #1 chosen from 1 choice
[   19.000707] hub 4-0:1.0: USB hub found
[   19.000714] hub 4-0:1.0: 2 ports detected
[   19.105860] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[   19.105879] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   19.105884] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   19.105933] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   19.105970] ehci_hcd 0000:00:1d.7: debug port 1
[   19.105976] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   19.105985] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xdfdffc00
[   19.109869] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   19.109952] usb usb5: configuration #1 chosen from 1 choice
[   19.109981] hub 5-0:1.0: USB hub found
[   19.109991] hub 5-0:1.0: 8 ports detected
[   19.136058] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   19.217990] SCSI subsystem initialized
[   19.222992] 8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   19.222996] 8139cp 0000:01:01.0: Try the "8139too" driver instead.
[   19.225103] 8139too Fast Ethernet driver 0.9.28
[   19.225158] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[   19.225526] eth0: RealTek RTL8139 at 0xe0052c00, 00:0e:2e:75:74:cf, IRQ 21
[   19.225528] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   19.227387] libata version 2.20 loaded.
[   19.231800] ata_piix 0000:00:1f.1: version 2.10ac1
[   19.231821] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
[   19.231843] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   19.231978] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[   19.232010] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[   19.232029] scsi0 : ata_piix
[   19.565079] ATA: abnormal status 0x7F on port 0x000101f7
[   19.742671] ata1.01: ATAPI, max UDMA/66
[   19.922191] ata1.01: configured for UDMA/33
[   19.922204] scsi1 : ata_piix
[   19.933901] usb 2-1: new low speed USB device using uhci_hcd and address 3
[   20.087616] ATA: abnormal status 0x7F on port 0x00010177
[   20.088644] scsi 0:0:1:0: CD-ROM            LITE-ON  DVDRW LH-18A1P   GL0B PQ: 0 ANSI: 5
[   20.088950] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   20.088982] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[   20.089000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   20.089039] ata3: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b402 bmdma 0x0001a400 irq 23
[   20.089066] ata4: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001a802 bmdma 0x0001a408 irq 23
[   20.089080] scsi2 : ata_piix
[   20.117673] usb 2-1: configuration #1 chosen from 1 choice
[   20.256312] ata3.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
[   20.256317] ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   20.268143] ata3.00: configured for UDMA/133
[   20.268155] scsi3 : ata_piix
[   20.356758] usb 4-1: new full speed USB device using uhci_hcd and address 2
[   20.430701] ATA: abnormal status 0x7F on port 0x0001b007
[   20.430828] scsi 2:0:0:0: Direct-Access     ATA      HDT722516DLA380  V43O PQ: 0 ANSI: 5
[   20.448265] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   20.448272] Uniform CD-ROM driver Revision: 3.20
[   20.448437] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   20.451996] sr 0:0:1:0: Attached scsi generic sg0 type 5
[   20.452020] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[   20.458011] SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
[   20.458028] sda: Write Protect is off
[   20.458031] sda: Mode Sense: 00 3a 00 00
[   20.458049] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.458110] SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
[   20.458121] sda: Write Protect is off
[   20.458123] sda: Mode Sense: 00 3a 00 00
[   20.458140] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.458143]  sda: sda1 sda2 sda3 sda4
[   20.483586] sd 2:0:0:0: Attached scsi disk sda
[   20.522537] usb 4-1: configuration #1 chosen from 1 choice
[   20.528579] usbcore: registered new interface driver hiddev
[   20.541576] input: Logitech Logitech USB Optical Mouse as /class/input/input2
[   20.541602] input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
[   20.541619] usbcore: registered new interface driver usbhid
[   20.541623] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   20.675013] Attempting manual resume
[   20.675018] swsusp: Resume From Partition 8:2
[   20.675020] PM: Checking swsusp image.
[   20.675193] PM: Resume from disk failed.
[   20.706591] kjournald starting.  Commit interval 5 seconds
[   20.706603] EXT3-fs: mounted filesystem with ordered data mode.
[   27.080819] eth0: link down
[   28.422065] NET: Registered protocol family 17
[   28.558470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   28.584050] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.093763] intel_rng: FWH not detected
[   29.108004] Linux agpgart interface v0.102 (c) Dave Jones
[   29.109672] agpgart: Detected an Intel 945G Chipset.
[   29.109794] agpgart: Detected 7932K stolen memory.
[   29.127739] agpgart: AGP aperture is 256M @ 0xe0000000
[   29.470372] input: PC Speaker as /class/input/input3
[   29.541720] iTCO_vendor_support: vendor-support=0
[   29.542807] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   29.542903] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   29.542958] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   29.553305] Attansic L1 Ethernet Network Driver - version 2.0.6
[   29.553309] Copyright(c) 2005-2006 Attansic Corporation.
[   29.553369] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   29.553381] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   29.688610] irda_init()
[   29.688626] NET: Registered protocol family 23
[   29.798042] SigmaTel STIr4200 IRDA/USB found at address 2, Vendor: 66f, Product: 4200
[   29.798113] drivers/net/irda/stir4200.c: IrDA: Registered SigmaTel device irda0
[   29.798124] usbcore: registered new interface driver stir4200
[   29.809033] parport: PnPBIOS parport detected.
[   29.809146] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   29.929287] atl1 0000:02:00.0: Unable to enable MSI: -22
[   30.018660] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 20
[   30.018678] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   30.473482] fuse init (API version 7.8)
[   30.492673] lp0: using parport0 (interrupt-driven).
[   30.528410] Adding 996020k swap on /dev/disk/by-uuid/0395e2e9-b1c3-4673-9499-f2418654de1d.  Priority:-1 extents:1 across:996020k
[   31.373049] atl1: eth1 link is up 100 Mbps full duplex
[   66.604770] EXT3 FS on sda3, internal journal
[   66.866022] kjournald starting.  Commit interval 5 seconds
[   66.866246] EXT3 FS on sda4, internal journal
[   66.866254] EXT3-fs: mounted filesystem with ordered data mode.
[   66.892914] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   66.946455] NTFS volume version 3.1.
[   71.220924] Using specific hotkey driver
[   71.278125] No dock devices found.
[   71.386234] ibm_acpi: ec object not found
[   71.477470] input: Power Button (FF) as /class/input/input4
[   71.497723] ACPI: Power Button (FF) [PWRF]
[   71.545673] input: Power Button (CM) as /class/input/input5
[   71.565690] ACPI: Power Button (CM) [PWRB]
[   71.616601] pcc_acpi: loading...
[   75.036708] ppdev: user-space parallel port driver
[   75.724762] [drm] Initialized drm 1.1.0 20060810
[   75.729857] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   75.732294] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   76.570606] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   76.570612] apm: overridden by ACPI.
[   76.842377] Bluetooth: Core ver 2.11
[   76.842440] NET: Registered protocol family 31
[   76.842443] Bluetooth: HCI device and connection manager initialized
[   76.842446] Bluetooth: HCI socket layer initialized
[   76.918090] Bluetooth: L2CAP ver 2.8
[   76.918095] Bluetooth: L2CAP socket layer initialized
[   76.994319] Bluetooth: RFCOMM socket layer initialized
[   76.994333] Bluetooth: RFCOMM TTY layer initialized
[   76.994335] Bluetooth: RFCOMM ver 1.8

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-04-03:

Could you give us an example url for which you experience this?

Revision history for this message

Richard (lawyerchu-gmail) wrote on 2007-04-03:

like this url:

http://radio.hinet.net/radio/player/player_ff.jsp?radio_id=228

I'd also like to remind you that totem plays wma files badly too...

Revision history for this message

Pedro Villavicencio (pedro) wrote on 2007-08-10:

Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering is this still an issue for you? Thanks in advance.

Changed in totem:
status:	New → Incomplete

Revision history for this message

Richard (lawyerchu-gmail) wrote on 2007-08-10:

already solved, thanks

Revision history for this message

Pedro Villavicencio (pedro) wrote on 2007-08-10:

Ok thanks your for you quick response :-)

Changed in totem:
status:	Incomplete → Fix Released

Report a bug

This report contains Public information

Everyone can see this information.

You are

Subscribing...

Edit bug mail

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.

Ubuntutotem package

problem with totem

Bug Description

Other bug subscribers

Remote bug watches

Ubuntu
totem package