[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbf6b0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009d800 (usable) [ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] modified: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) [ 0.000000] modified: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) [ 0.000000] modified: 00000000bf700000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3785a000 - 37fefdf5 [ 0.000000] Allocated new RAMDISK: 008e0000 - 01075df5 [ 0.000000] Move RAMDISK from 000000003785a000 - 0000000037fefdf4 to 008e0000 - 01075df4 [ 0.000000] ACPI: RSDP 000f69d0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT bf6bcaec 00094 (v01 LENOVO TP-7O 00001030 LTP 00000000) [ 0.000000] ACPI: FACP bf6bcc00 000F4 (v03 LENOVO TP-7O 00001030 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT bf6bd00c 0EBEF (v01 LENOVO TP-7O 00001030 MSFT 03000000) [ 0.000000] ACPI: FACS bf6e4000 00040 [ 0.000000] ACPI: SSDT bf6bcdb4 00258 (v01 LENOVO TP-7O 00001030 MSFT 03000000) [ 0.000000] ACPI: ECDT bf6cbbfb 00052 (v01 LENOVO TP-7O 00001030 LNVO 00000001) [ 0.000000] ACPI: TCPA bf6cbc4d 00032 (v02 LENOVO TP-7O 00001030 LNVO 00000001) [ 0.000000] ACPI: APIC bf6cbc7f 00068 (v01 LENOVO TP-7O 00001030 LNVO 00000001) [ 0.000000] ACPI: MCFG bf6cbce7 0003C (v01 LENOVO TP-7O 00001030 LNVO 00000001) [ 0.000000] ACPI: HPET bf6cbd23 00038 (v01 LENOVO TP-7O 00001030 LNVO 00000001) [ 0.000000] ACPI: SLIC bf6cbe62 00176 (v01 LENOVO TP-7O 00001030 LTP 00000000) [ 0.000000] ACPI: BOOT bf6cbfd8 00028 (v01 LENOVO TP-7O 00001030 LTP 00000001) [ 0.000000] ACPI: SSDT bf6e2697 0025F (v01 LENOVO TP-7O 00001030 INTL 20050513) [ 0.000000] ACPI: SSDT bf6e28f6 000A6 (v01 LENOVO TP-7O 00001030 INTL 20050513) [ 0.000000] ACPI: SSDT bf6e299c 004F7 (v01 LENOVO TP-7O 00001030 INTL 20050513) [ 0.000000] ACPI: SSDT bf6e2e93 008BD (v01 LENOVO TP-7O 00001030 INTL 20050513) [ 0.000000] ACPI: SSDT bf6e3750 0069C (v01 LENOVO TP-7O 00001030 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad R61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df16c] BRK ==> [00008dc000 - 00008df16c] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e0000 - 0001075df5] NEW RAMDISK ==> [00008e0000 - 0001075df5] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f6a00] f6a00 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf6b0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bf6b0 [ 0.000000] On node 0 totalpages: 783945 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1077000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4350 pages used for memmap [ 0.000000] HighMem zone: 552372 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777819 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=8260910d-a6e1-440d-8209-7a52ad33de6c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15680960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf6b0) [ 0.000000] Memory: 3078080k/3136192k available (4679k kernel code, 56664k reserved, 2116k data, 660k init, 2226888k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.529 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.05 BogoMIPS (lpj=7182116) [ 0.004023] Security Framework initialized [ 0.004042] AppArmor: AppArmor initialized [ 0.004048] Mount-cache hash table entries: 512 [ 0.004173] Initializing cgroup subsys ns [ 0.004177] Initializing cgroup subsys cpuacct [ 0.004182] Initializing cgroup subsys memory [ 0.004189] Initializing cgroup subsys devices [ 0.004191] Initializing cgroup subsys freezer [ 0.004194] Initializing cgroup subsys net_cls [ 0.004213] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004216] CPU: L2 cache: 2048K [ 0.004219] CPU: Physical Processor ID: 0 [ 0.004221] CPU: Processor Core ID: 0 [ 0.004225] mce: CPU supports 6 MCE banks [ 0.004234] CPU0: Thermal monitoring enabled (TM2) [ 0.004237] using mwait in idle threads. [ 0.004244] Performance Events: Core2 events, Intel PMU driver. [ 0.004253] ... version: 2 [ 0.004255] ... bit width: 40 [ 0.004257] ... generic registers: 2 [ 0.004259] ... value mask: 000000ffffffffff [ 0.004261] ... max period: 000000007fffffff [ 0.004263] ... fixed-purpose events: 3 [ 0.004265] ... event mask: 0000000700000003 [ 0.004269] Checking 'hlt' instruction... OK. [ 0.022707] ACPI: Core revision 20090903 [ 0.048015] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.048021] ftrace: allocating 21780 entries in 43 pages [ 0.052063] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.052447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.094561] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.180053] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 0.180069] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.184001] Measured 384813 cycles TSC warp between CPUs, turning off TSC clock. [ 0.184001] Marking TSC unstable due to check_tsc_sync_source failed [ 0.184019] Brought up 2 CPUs [ 0.184022] Total of 2 processors activated (7182.04 BogoMIPS). [ 0.184511] CPU0 attaching sched-domain: [ 0.184515] domain 0: span 0-1 level MC [ 0.184517] groups: 0 1 [ 0.184524] CPU1 attaching sched-domain: [ 0.184526] domain 0: span 0-1 level MC [ 0.184529] groups: 1 0 [ 0.184629] devtmpfs: initialized [ 0.184629] regulator: core version 0.5 [ 0.184629] Time: 15:22:29 Date: 09/03/11 [ 0.184629] NET: Registered protocol family 16 [ 0.184629] Trying to unpack rootfs image as initramfs... [ 0.184629] EISA bus registered [ 0.184629] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.184629] ACPI: bus type pci registered [ 0.184629] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.184629] PCI: MCFG area at f0000000 reserved in E820 [ 0.184629] PCI: Using MMCONFIG for extended config space [ 0.184629] PCI: Using configuration type 1 for base access [ 0.188113] bio: create slab at 0 [ 0.190162] ACPI: EC: EC description table is found, configuring boot EC [ 0.206728] ACPI: Interpreter enabled [ 0.206728] ACPI: (supports S0 S3 S4 S5) [ 0.206728] ACPI: Using IOAPIC for interrupt routing [ 0.217915] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.219077] ACPI: Power Resource [PUBS] (on) [ 0.222079] ACPI: ACPI Dock Station Driver: 4 docks/bays found [ 0.222514] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.222627] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.222636] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.222642] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.222690] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] [ 0.222934] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.223098] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.223256] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe304000-0xfe3043ff] [ 0.223402] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.223412] pci 0000:00:1a.7: PME# disabled [ 0.224040] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe100000-0xfe103fff] [ 0.224199] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.224208] pci 0000:00:1b.0: PME# disabled [ 0.224443] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.224452] pci 0000:00:1c.0: PME# disabled [ 0.224691] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.224701] pci 0000:00:1c.1: PME# disabled [ 0.224951] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.224961] pci 0000:00:1c.2: PME# disabled [ 0.225203] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.225213] pci 0000:00:1c.3: PME# disabled [ 0.225465] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.225475] pci 0000:00:1c.4: PME# disabled [ 0.225638] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.225807] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.225968] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.226143] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe304400-0xfe3047ff] [ 0.226302] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.226312] pci 0000:00:1d.7: PME# disabled [ 0.226708] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.226715] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.226722] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.226729] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.226736] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.226891] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.226909] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.226927] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.226945] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.226963] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef] [ 0.226979] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df] [ 0.227055] pci 0000:00:1f.2: PME# supported from D3hot [ 0.227065] pci 0000:00:1f.2: PME# disabled [ 0.227129] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe304800-0xfe3048ff] [ 0.227193] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.227411] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.227422] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.227437] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] [ 0.227641] pci 0000:03:00.0: reg 10 32bit mmio: [0xdf6ff000-0xdf6fffff] [ 0.227897] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.227911] pci 0000:03:00.0: PME# disabled [ 0.228049] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.228055] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdf6fffff] [ 0.228064] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] [ 0.228338] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe000000-0xfe00ffff] [ 0.228630] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.228644] pci 0000:04:00.0: PME# disabled [ 0.228847] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfe0fffff] [ 0.229011] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff] [ 0.229021] pci 0000:00:1c.3: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.229039] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] [ 0.229190] pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] [ 0.229200] pci 0000:00:1c.4: bridge 32bit mmio: [0xd4000000-0xd5ffffff] [ 0.229218] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] [ 0.229324] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] [ 0.229382] pci 0000:15:00.0: supports D1 D2 [ 0.229385] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229395] pci 0000:15:00.0: PME# disabled [ 0.229497] pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] [ 0.229643] pci 0000:15:00.1: supports D1 D2 [ 0.229645] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229656] pci 0000:15:00.1: PME# disabled [ 0.229755] pci 0000:15:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] [ 0.229903] pci 0000:15:00.2: supports D1 D2 [ 0.229906] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229916] pci 0000:15:00.2: PME# disabled [ 0.230017] pci 0000:15:00.3: reg 10 32bit mmio: [0xf8301c00-0xf8301cff] [ 0.230163] pci 0000:15:00.3: supports D1 D2 [ 0.230165] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.230176] pci 0000:15:00.3: PME# disabled [ 0.230279] pci 0000:15:00.4: reg 10 32bit mmio: [0xf8302000-0xf83020ff] [ 0.230428] pci 0000:15:00.4: supports D1 D2 [ 0.230430] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.230438] pci 0000:15:00.4: PME# disabled [ 0.230541] pci 0000:15:00.5: reg 10 32bit mmio: [0xf8302400-0xf83024ff] [ 0.230691] pci 0000:15:00.5: supports D1 D2 [ 0.230694] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.230704] pci 0000:15:00.5: PME# disabled [ 0.230854] pci 0000:00:1e.0: transparent bridge [ 0.230864] pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff] [ 0.230874] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] [ 0.230892] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.231033] pci_bus 0000:00: on NUMA node 0 [ 0.231041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.231223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.231304] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.231383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.231461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.231548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.231635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.239327] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.239555] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.239777] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.240008] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.240231] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.240453] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.240674] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.240896] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.241063] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.241086] vgaarb: loaded [ 0.241236] SCSI subsystem initialized [ 0.241334] libata version 3.00 loaded. [ 0.241411] usbcore: registered new interface driver usbfs [ 0.241425] usbcore: registered new interface driver hub [ 0.241455] usbcore: registered new device driver usb [ 0.241609] ACPI: WMI: Mapper loaded [ 0.241612] PCI: Using ACPI for IRQ routing [ 0.242059] NetLabel: Initializing [ 0.242061] NetLabel: domain hash size = 128 [ 0.242063] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.242077] NetLabel: unlabeled traffic allowed by default [ 0.242118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.242124] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.248032] Switching to clocksource hpet [ 0.250397] AppArmor: AppArmor Filesystem Enabled [ 0.250411] pnp: PnP ACPI init [ 0.250427] ACPI: bus type pnp registered [ 0.255204] pnp: PnP ACPI: found 11 devices [ 0.255207] ACPI: ACPI bus type pnp unregistered [ 0.255211] PnPBIOS: Disabled by ACPI PNP [ 0.255224] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.255228] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.255231] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.255234] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.255238] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.255241] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.255244] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.255248] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.255251] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.255254] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.255257] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.255261] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved [ 0.255265] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.255268] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.255277] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.255281] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.255284] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.255287] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.255290] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.255294] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.255297] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.255301] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.255304] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.255307] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.255311] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.255314] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.290233] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.290240] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.290255] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.290265] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.290283] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.290289] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.290303] pci 0000:00:1c.1: MEM window: 0xdc100000-0xdf6fffff [ 0.290313] pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff [ 0.290331] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.290337] pci 0000:00:1c.2: IO window: 0xa000-0xafff [ 0.290351] pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe0fffff [ 0.290359] pci 0000:00:1c.2: PREFETCH window: 0x000000c0000000-0x000000c01fffff [ 0.290376] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.290383] pci 0000:00:1c.3: IO window: 0x4000-0x4fff [ 0.290396] pci 0000:00:1c.3: MEM window: 0xd8000000-0xd9ffffff [ 0.290406] pci 0000:00:1c.3: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff [ 0.290424] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d [ 0.290430] pci 0000:00:1c.4: IO window: 0x5000-0x5fff [ 0.290444] pci 0000:00:1c.4: MEM window: 0xd4000000-0xd5ffffff [ 0.290454] pci 0000:00:1c.4: PREFETCH window: 0x000000df800000-0x000000df8fffff [ 0.290474] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 0.290476] pci 0000:15:00.0: IO window: 0x006000-0x0060ff [ 0.290487] pci 0000:15:00.0: IO window: 0x006400-0x0064ff [ 0.290497] pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.290508] pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff [ 0.290519] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 0.290525] pci 0000:00:1e.0: IO window: 0x6000-0x9fff [ 0.290539] pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff [ 0.290549] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.290589] alloc irq_desc for 20 on node -1 [ 0.290592] alloc kstat_irqs on node -1 [ 0.290599] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.290610] pci 0000:00:1c.0: setting latency timer to 64 [ 0.290633] alloc irq_desc for 21 on node -1 [ 0.290635] alloc kstat_irqs on node -1 [ 0.290639] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.290650] pci 0000:00:1c.1: setting latency timer to 64 [ 0.290672] alloc irq_desc for 22 on node -1 [ 0.290674] alloc kstat_irqs on node -1 [ 0.290678] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.290689] pci 0000:00:1c.2: setting latency timer to 64 [ 0.290712] alloc irq_desc for 23 on node -1 [ 0.290714] alloc kstat_irqs on node -1 [ 0.290718] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.290729] pci 0000:00:1c.3: setting latency timer to 64 [ 0.290752] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.290762] pci 0000:00:1c.4: setting latency timer to 64 [ 0.290773] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.290787] pci 0000:00:1e.0: setting latency timer to 64 [ 0.290810] alloc irq_desc for 16 on node -1 [ 0.290812] alloc kstat_irqs on node -1 [ 0.290816] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.290826] pci 0000:15:00.0: setting latency timer to 64 [ 0.290834] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.290837] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.290840] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.290843] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.290846] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] [ 0.290849] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.290852] pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdf6fffff] [ 0.290855] pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff] [ 0.290858] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] [ 0.290861] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe0fffff] [ 0.290863] pci_bus 0000:04: resource 2 pref mem [0xc0000000-0xc01fffff] [ 0.290866] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff] [ 0.290869] pci_bus 0000:05: resource 1 mem: [0xd8000000-0xd9ffffff] [ 0.290872] pci_bus 0000:05: resource 2 pref mem [0xdfb00000-0xdfbfffff] [ 0.290875] pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff] [ 0.290878] pci_bus 0000:0d: resource 1 mem: [0xd4000000-0xd5ffffff] [ 0.290881] pci_bus 0000:0d: resource 2 pref mem [0xdf800000-0xdf8fffff] [ 0.290884] pci_bus 0000:15: resource 0 io: [0x6000-0x9fff] [ 0.290886] pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff] [ 0.290889] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.290892] pci_bus 0000:15: resource 3 io: [0x00-0xffff] [ 0.290895] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff] [ 0.290898] pci_bus 0000:16: resource 0 io: [0x6000-0x60ff] [ 0.290900] pci_bus 0000:16: resource 1 io: [0x6400-0x64ff] [ 0.290903] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.290906] pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff] [ 0.290951] NET: Registered protocol family 2 [ 0.291067] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.291457] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.291932] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.292186] TCP: Hash tables configured (established 131072 bind 65536) [ 0.292189] TCP reno registered [ 0.292288] NET: Registered protocol family 1 [ 0.292313] pci 0000:00:02.0: Boot video device [ 0.292557] Simple Boot Flag at 0x35 set to 0x1 [ 0.292751] cpufreq-nforce2: No nForce2 chipset. [ 0.292783] Scanning for low memory corruption every 60 seconds [ 0.292908] audit: initializing netlink socket (disabled) [ 0.292919] type=2000 audit(1315063349.292:1): initialized [ 0.304180] highmem bounce pool size: 64 pages [ 0.304186] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.305961] VFS: Disk quotas dquot_6.5.2 [ 0.306033] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.306685] fuse init (API version 7.13) [ 0.306786] msgmni has been set to 1664 [ 0.307033] alg: No test for stdrng (krng) [ 0.307096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.307100] io scheduler noop registered [ 0.307102] io scheduler anticipatory registered [ 0.307104] io scheduler deadline registered [ 0.307148] io scheduler cfq registered (default) [ 0.307445] alloc irq_desc for 24 on node -1 [ 0.307447] alloc kstat_irqs on node -1 [ 0.307469] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.307496] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.307837] alloc irq_desc for 25 on node -1 [ 0.307839] alloc kstat_irqs on node -1 [ 0.307859] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.307881] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.308244] alloc irq_desc for 26 on node -1 [ 0.308247] alloc kstat_irqs on node -1 [ 0.308262] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.308288] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.308628] alloc irq_desc for 27 on node -1 [ 0.308630] alloc kstat_irqs on node -1 [ 0.308648] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.308673] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.309012] alloc irq_desc for 28 on node -1 [ 0.309014] alloc kstat_irqs on node -1 [ 0.309032] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.309055] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.309791] pciehp: Using ACPI for slot detection. [ 0.309948] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0 [ 0.310031] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.310054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.310314] ACPI: AC Adapter [AC] (on-line) [ 0.310394] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.310588] ACPI: Lid Switch [LID] [ 0.310641] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.310650] ACPI: Sleep Button [SLPB] [ 0.310714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.310717] ACPI: Power Button [PWRF] [ 0.311487] ACPI: SSDT bf6e1d72 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.312317] ACPI: SSDT bf6e2079 0061E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.315553] Monitor-Mwait will be used to enter C-1 state [ 0.315591] Monitor-Mwait will be used to enter C-2 state [ 0.315622] Monitor-Mwait will be used to enter C-3 state [ 0.315675] processor LNXCPU:00: registered as cooling_device0 [ 0.316089] ACPI: SSDT bf6e1caa 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.316706] ACPI: SSDT bf6e1ff4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.332150] processor LNXCPU:01: registered as cooling_device1 [ 0.338939] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.338949] ACPI: Thermal Zone [THM0] (59 C) [ 0.340571] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.340580] ACPI: Thermal Zone [THM1] (62 C) [ 0.342235] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.343808] brd: module loaded [ 0.344375] loop: module loaded [ 0.344470] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.344576] ata_piix 0000:00:1f.2: version 2.13 [ 0.344605] ata_piix 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.344616] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.349278] isapnp: Scanning for PnP cards... [ 0.382924] ACPI: Battery Slot [BAT0] (battery present) [ 0.420855] Freeing initrd memory: 7767k freed [ 0.501055] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.501204] scsi0 : ata_piix [ 0.501334] scsi1 : ata_piix [ 0.502497] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 0.502501] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 0.502904] Fixed MDIO Bus: probed [ 0.502945] PPP generic driver version 2.4.2 [ 0.503018] tun: Universal TUN/TAP device driver, 1.6 [ 0.503020] tun: (C) 1999-2004 Max Krasnyansky [ 0.503127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.503380] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.503648] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.503663] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.503691] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.503697] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.503735] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.507662] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.507680] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe304000 [ 0.521025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.521134] usb usb1: configuration #1 chosen from 1 choice [ 0.521166] hub 1-0:1.0: USB hub found [ 0.521174] hub 1-0:1.0: 4 ports detected [ 0.521410] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.521580] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.521589] alloc irq_desc for 19 on node -1 [ 0.521592] alloc kstat_irqs on node -1 [ 0.521598] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.521614] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.521620] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.521656] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.521704] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.525607] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.525623] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe304400 [ 0.541025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.541111] usb usb2: configuration #1 chosen from 1 choice [ 0.541140] hub 2-0:1.0: USB hub found [ 0.541148] hub 2-0:1.0: 6 ports detected [ 0.541226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.541247] uhci_hcd: USB Universal Host Controller Interface driver [ 0.541274] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.541286] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.541292] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.541329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.541376] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.541481] usb usb3: configuration #1 chosen from 1 choice [ 0.541510] hub 3-0:1.0: USB hub found [ 0.541517] hub 3-0:1.0: 2 ports detected [ 0.577072] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 0.577269] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 0.577275] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.577282] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.577286] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.577332] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.577380] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 0.577485] usb usb4: configuration #1 chosen from 1 choice [ 0.577515] hub 4-0:1.0: USB hub found [ 0.577523] hub 4-0:1.0: 2 ports detected [ 0.577775] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.577963] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.577969] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.577977] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.577981] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.578017] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.578062] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860 [ 0.578171] usb usb5: configuration #1 chosen from 1 choice [ 0.578200] hub 5-0:1.0: USB hub found [ 0.578208] hub 5-0:1.0: 2 ports detected [ 0.578269] alloc irq_desc for 17 on node -1 [ 0.578271] alloc kstat_irqs on node -1 [ 0.578277] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.578286] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.578291] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.578325] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.578376] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 [ 0.578478] usb usb6: configuration #1 chosen from 1 choice [ 0.578507] hub 6-0:1.0: USB hub found [ 0.578515] hub 6-0:1.0: 2 ports detected [ 0.578743] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 0.578929] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 0.578935] alloc irq_desc for 18 on node -1 [ 0.578937] alloc kstat_irqs on node -1 [ 0.578942] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.578948] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.578952] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.578990] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.579035] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.579138] usb usb7: configuration #1 chosen from 1 choice [ 0.579170] hub 7-0:1.0: USB hub found [ 0.579177] hub 7-0:1.0: 2 ports detected [ 0.579301] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.586843] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.586850] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.586978] mice: PS/2 mouse device common for all mice [ 0.587136] rtc_cmos 00:07: RTC can wake from S4 [ 0.587182] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.587223] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.587331] device-mapper: uevent: version 1.0.3 [ 0.587432] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.587509] device-mapper: multipath: version 1.1.0 loaded [ 0.587512] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.587633] EISA: Probing bus 0 at eisa.0 [ 0.587642] Cannot allocate resource for EISA slot 1 [ 0.587645] Cannot allocate resource for EISA slot 2 [ 0.587647] Cannot allocate resource for EISA slot 3 [ 0.587649] Cannot allocate resource for EISA slot 4 [ 0.587652] Cannot allocate resource for EISA slot 5 [ 0.587654] Cannot allocate resource for EISA slot 6 [ 0.587656] Cannot allocate resource for EISA slot 7 [ 0.587658] Cannot allocate resource for EISA slot 8 [ 0.587660] EISA: Detected 0 cards. [ 0.592199] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.707964] isapnp: No Plug & Play device found [ 0.708973] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WX05, max UDMA/33 [ 0.709158] ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133 [ 0.709162] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.709440] cpuidle: using governor ladder [ 0.709576] cpuidle: using governor menu [ 0.710081] TCP cubic registered [ 0.710255] NET: Registered protocol family 10 [ 0.710793] lo: Disabled Privacy Extensions [ 0.711194] NET: Registered protocol family 17 [ 0.712040] Using IPI No-Shortcut mode [ 0.712119] PM: Resume from disk failed. [ 0.712137] registered taskstats version 1 [ 0.713381] Magic number: 11:655:385 [ 0.713387] usb usb3: hash matches [ 0.713411] thermal cooling_device0: hash matches [ 0.713500] rtc_cmos 00:07: setting system clock to 2011-09-03 15:22:30 UTC (1315063350) [ 0.713503] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.713505] EDD information not available. [ 0.724324] ata2.00: configured for UDMA/33 [ 0.725629] ata1.00: configured for UDMA/133 [ 0.725753] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5 [ 0.725884] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.725891] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 0.725943] sd 0:0:0:0: [sda] Write Protect is off [ 0.725947] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.725973] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.726112] sda: [ 0.729746] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WX05 PQ: 0 ANSI: 5 [ 0.743410] sda1 sda2 sda3 sda4 [ 0.760152] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.760166] Freeing unused kernel memory: 660k freed [ 0.760563] Write protecting the kernel text: 4680k [ 0.760613] Write protecting the kernel read-only data: 1840k [ 0.779149] udev: starting version 151 [ 0.914953] tg3.c:v3.102 (September 1, 2009) [ 0.915026] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.915048] tg3 0000:04:00.0: setting latency timer to 64 [ 0.943623] ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.943635] ohci1394 0000:15:00.1: setting latency timer to 64 [ 1.002143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.168058] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.317705] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 1.336716] usb 3-1: configuration #1 chosen from 1 choice [ 1.576062] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 1.749463] eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1e:37:15:bc:06 [ 1.749467] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.749470] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.749472] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.750540] usb 4-1: configuration #1 chosen from 1 choice [ 2.276530] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a194672] [ 2.845237] udev: starting version 151 [ 3.831989] Bluetooth: Core ver 2.15 [ 3.832694] NET: Registered protocol family 31 [ 3.832697] Bluetooth: HCI device and connection manager initialized [ 3.832700] Bluetooth: HCI socket layer initialized [ 3.840880] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 3.841633] usbcore: registered new interface driver btusb [ 4.078934] type=1505 audit(1315043553.862:2): operation="profile_load" pid=650 name="/sbin/dhclient3" [ 4.079696] type=1505 audit(1315043553.862:3): operation="profile_load" pid=650 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 4.080095] type=1505 audit(1315043553.866:4): operation="profile_load" pid=650 name="/usr/lib/connman/scripts/dhclient-script" [ 4.323679] Non-volatile memory driver v1.3 [ 4.333979] Linux agpgart interface v0.103 [ 4.386543] [drm] Initialized drm 1.1.0 20060810 [ 4.399463] cfg80211: Calling CRDA to update world regulatory domain [ 4.451930] lp: driver loaded but no devices found [ 4.463355] usbcore: registered new interface driver hiddev [ 4.477820] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input5 [ 4.478055] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.1-1/input0 [ 4.478088] usbcore: registered new interface driver usbhid [ 4.478274] usbhid: v2.6:USB HID core driver [ 4.524330] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 4.524969] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 4.529687] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 4.544157] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6 [ 4.559401] ricoh-mmc: Ricoh MMC Controller disabling driver [ 4.559405] ricoh-mmc: Copyright(c) Philip Langdale [ 4.559437] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11) [ 4.559478] ricoh-mmc: Controller is now disabled. [ 4.574905] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7 [ 4.873055] cfg80211: World regulatory domain updated: [ 4.873058] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.873062] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.873065] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.873068] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.873071] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.873073] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.279995] i915 0000:00:02.0: power state changed by ACPI to D0 [ 5.280046] i915 0000:00:02.0: power state changed by ACPI to D0 [ 5.280055] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.280060] i915 0000:00:02.0: setting latency timer to 64 [ 5.286115] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 5.286119] [drm] MTRR allocation failed. Graphics performance may suffer. [ 5.286187] alloc irq_desc for 29 on node -1 [ 5.286189] alloc kstat_irqs on node -1 [ 5.286200] i915 0000:00:02.0: irq 29 for MSI/MSI-X [ 5.286207] [drm] set up 7M of stolen space [ 5.289610] sdhci: Secure Digital Host Controller Interface driver [ 5.289614] sdhci: Copyright(c) Pierre Ossman [ 5.293721] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 5.325050] tpm_tis 00:0a: 1.2 TPM (device-id 0x3203, rev-id 9) [ 5.412949] [drm] initialized overlay support [ 5.421843] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 5.421850] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 5.421857] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff [ 5.421861] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x9fff: clean. [ 5.423003] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 5.423007] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 5.424538] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 5.424564] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.425600] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 5.425608] sdhci-pci 0000:15:00.2: setting latency timer to 64 [ 5.426639] Registered led device: mmc0:: [ 5.427676] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 5.894593] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 5.894597] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 5.894713] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.894761] iwl3945 0000:03:00.0: setting latency timer to 64 [ 5.969180] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 5.969185] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 5.969308] alloc irq_desc for 30 on node -1 [ 5.969310] alloc kstat_irqs on node -1 [ 5.969349] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X [ 6.046192] fb0: inteldrmfb frame buffer device [ 6.046196] registered panic notifier [ 6.049402] acpi device:01: registered as cooling_device2 [ 6.050130] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 6.050180] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 6.050232] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.131348] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 6.150746] vga16fb: initializing [ 6.150750] vga16fb: mapped to 0xc00a0000 [ 6.150754] vga16fb: not registering due to another framebuffer present [ 6.244771] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 6.244774] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.244776] thinkpad_acpi: ThinkPad BIOS 7OET24WW (1.03 ), EC 7KHT22WW-1.06 [ 6.244779] thinkpad_acpi: Lenovo ThinkPad R61, model 8933AL4 [ 6.245976] thinkpad_acpi: ACPI backlight control delay disabled [ 6.246757] thinkpad_acpi: radio switch found; radios are enabled [ 6.246909] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 6.246912] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 6.252159] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 6.252946] Registered led device: tpacpi::thinklight [ 6.253040] Registered led device: tpacpi::power [ 6.253274] Registered led device: tpacpi::standby [ 6.253336] Registered led device: tpacpi::thinkvantage [ 6.256481] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 6.256707] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 6.260727] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 6.567226] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 6.569165] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 6.569915] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 6.570530] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 6.571324] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 6.940643] Console: switching to colour frame buffer device 160x50 [ 6.948766] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.948770] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 6.948801] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.680579] type=1505 audit(1315043559.466:5): operation="profile_load" pid=1052 name="/usr/share/gdm/guest-session/Xsession" [ 9.682770] type=1505 audit(1315043559.466:6): operation="profile_replace" pid=1053 name="/sbin/dhclient3" [ 9.683469] type=1505 audit(1315043559.466:7): operation="profile_replace" pid=1053 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.683844] type=1505 audit(1315043559.466:8): operation="profile_replace" pid=1053 name="/usr/lib/connman/scripts/dhclient-script" [ 9.739078] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 9.920640] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 9.947534] type=1505 audit(1315043559.731:9): operation="profile_load" pid=1054 name="/usr/bin/evince" [ 9.957610] type=1505 audit(1315043559.743:10): operation="profile_load" pid=1054 name="/usr/bin/evince-previewer" [ 9.963281] type=1505 audit(1315043559.747:11): operation="profile_load" pid=1054 name="/usr/bin/evince-thumbnailer" [ 9.995032] type=1505 audit(1315043559.779:12): operation="profile_load" pid=1124 name="/usr/lib/cups/backend/cups-pdf" [ 9.996083] type=1505 audit(1315043559.779:13): operation="profile_load" pid=1124 name="/usr/sbin/cupsd" [ 9.996273] Registered led device: iwl-phy0::radio [ 9.996862] Registered led device: iwl-phy0::assoc [ 9.997407] Registered led device: iwl-phy0::RX [ 9.997936] Registered led device: iwl-phy0::TX [ 10.004964] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.013812] type=1505 audit(1315043559.799:14): operation="profile_load" pid=1126 name="/usr/sbin/tcpdump" [ 10.018068] alloc irq_desc for 31 on node -1 [ 10.018072] alloc kstat_irqs on node -1 [ 10.018103] tg3 0000:04:00.0: irq 31 for MSI/MSI-X [ 10.046655] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.695864] Bluetooth: L2CAP ver 2.14 [ 11.695867] Bluetooth: L2CAP socket layer initialized [ 11.787739] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.787743] Bluetooth: BNEP filters: protocol multicast [ 11.818972] Bridge firewalling registered [ 11.944330] Bluetooth: SCO (Voice Link) ver 0.6 [ 11.944334] Bluetooth: SCO socket layer initialized [ 11.959994] ppdev: user-space parallel port driver [ 12.068137] Bluetooth: RFCOMM TTY layer initialized [ 12.068142] Bluetooth: RFCOMM socket layer initialized [ 12.068145] Bluetooth: RFCOMM ver 1.11 [ 116.648675] wlan0: deauthenticating from 00:1b:11:24:7f:55 by local choice (reason=3) [ 116.651010] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 1) [ 116.654542] wlan0: direct probe responded [ 116.654553] wlan0: authenticate with AP 00:1b:11:24:7f:55 (try 1) [ 116.656295] wlan0: authenticated [ 116.656337] wlan0: associate with AP 00:1b:11:24:7f:55 (try 1) [ 116.659193] wlan0: RX AssocResp from 00:1b:11:24:7f:55 (capab=0x431 status=0 aid=2) [ 116.659202] wlan0: associated [ 116.662809] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 127.136069] wlan0: no IPv6 routers present [ 589.664085] CE: hpet increasing min_delta_ns to 15000 nsec [ 1021.032118] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1021.165921] usb 2-1: configuration #1 chosen from 1 choice [ 1021.218019] Initializing USB Mass Storage driver... [ 1021.218301] scsi2 : SCSI emulation for USB Mass Storage devices [ 1021.218841] usbcore: registered new interface driver usb-storage [ 1021.218848] USB Mass Storage support registered. [ 1021.221371] usb-storage: device found at 2 [ 1021.221377] usb-storage: waiting for device to settle before scanning [ 1026.220828] usb-storage: device scan complete [ 1026.221481] scsi 2:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4 [ 1026.222231] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1026.223858] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1026.224411] sd 2:0:0:0: [sdb] Write Protect is off [ 1026.224415] sd 2:0:0:0: [sdb] Mode Sense: 2f 08 00 00 [ 1026.224418] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 1026.226207] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 1026.226214] sdb: sdb1 sdb2 [ 1026.267163] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 1026.267170] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3380.813122] wlan0: deauthenticating from 00:1b:11:24:7f:55 by local choice (reason=3) [ 3382.596959] wlan0: deauthenticating from 00:1b:11:24:7f:55 by local choice (reason=3) [ 3382.632880] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 1) [ 3382.636444] wlan0: direct probe responded [ 3382.636452] wlan0: authenticate with AP 00:1b:11:24:7f:55 (try 1) [ 3382.639344] wlan0: authenticated [ 3382.639383] wlan0: associate with AP 00:1b:11:24:7f:55 (try 1) [ 3382.836164] wlan0: associate with AP 00:1b:11:24:7f:55 (try 2) [ 3382.838983] wlan0: RX AssocResp from 00:1b:11:24:7f:55 (capab=0x431 status=0 aid=2) [ 3382.838990] wlan0: associated [ 3385.864394] wlan0: deauthenticated from 00:1b:11:24:7f:55 (Reason: 2) [ 3387.612999] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 1) [ 3387.616558] wlan0: direct probe responded [ 3387.616566] wlan0: authenticate with AP 00:1b:11:24:7f:55 (try 1) [ 3387.618406] wlan0: authenticated [ 3387.618445] wlan0: associate with AP 00:1b:11:24:7f:55 (try 1) [ 3387.621344] wlan0: RX AssocResp from 00:1b:11:24:7f:55 (capab=0x431 status=0 aid=2) [ 3387.621352] wlan0: associated [ 3390.654653] wlan0: deauthenticated from 00:1b:11:24:7f:55 (Reason: 2) [ 3392.467186] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 1) [ 3392.470785] wlan0: direct probe responded [ 3392.470793] wlan0: authenticate with AP 00:1b:11:24:7f:55 (try 1) [ 3392.472620] wlan0: authenticated [ 3392.472655] wlan0: associate with AP 00:1b:11:24:7f:55 (try 1) [ 3392.475548] wlan0: RX AssocResp from 00:1b:11:24:7f:55 (capab=0x431 status=0 aid=2) [ 3392.475554] wlan0: associated [ 4056.194301] CE: hpet increasing min_delta_ns to 22500 nsec [ 4234.538744] usb 2-1: USB disconnect, address 2 [ 4234.538933] sd 2:0:0:0: Device offlined - not ready after error recovery [ 4234.538952] sd 2:0:0:0: [sdb] Unhandled error code [ 4234.538957] sd 2:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_OK [ 4234.538967] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 3f 00 00 08 00 [ 4234.538993] end_request: I/O error, dev sdb, sector 63 [ 4234.539004] Buffer I/O error on device sdb1, logical block 0 [ 4293.544141] usb 4-1: USB disconnect, address 2 [11134.706650] Monitor-Mwait will be used to enter C-3 state [11138.500040] No probe response from AP 00:1b:11:24:7f:55 after 500ms, disconnecting. [11140.245404] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 1) [11140.444401] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 2) [11140.644261] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 3) [11140.844060] wlan0: direct probe to AP 00:1b:11:24:7f:55 timed out [11248.024786] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [11248.027376] SGI XFS Quota Management subsystem [11248.034880] JFS: nTxBlock = 8192, nTxLock = 65536 [11248.054432] NTFS driver 2.1.29 [Flags: R/O MODULE]. [11248.069593] QNX4 filesystem 0.2.3 registered. [11248.117813] Btrfs loaded [11309.586168] wlan0: direct probe to AP 00:1b:11:24:7f:55 (try 1) [11309.589318] wlan0: direct probe responded [11309.589327] wlan0: authenticate with AP 00:1b:11:24:7f:55 (try 1) [11309.591173] wlan0: authenticated [11309.591212] wlan0: associate with AP 00:1b:11:24:7f:55 (try 1) [11309.594369] wlan0: RX AssocResp from 00:1b:11:24:7f:55 (capab=0x431 status=0 aid=1) [11309.594376] wlan0: associated [11598.753342] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11598.753353] ata1.00: BMDMA stat 0x25 [11598.753361] ata1.00: failed command: READ DMA [11598.753376] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11598.753379] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11598.753387] ata1.00: status: { DRDY ERR } [11598.753392] ata1.00: error: { UNC } [11598.777001] ata1.00: configured for UDMA/133 [11598.777043] ata1: EH complete [11602.128090] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11602.128100] ata1.00: BMDMA stat 0x25 [11602.128108] ata1.00: failed command: READ DMA [11602.128123] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11602.128126] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11602.128133] ata1.00: status: { DRDY ERR } [11602.128139] ata1.00: error: { UNC } [11602.152866] ata1.00: configured for UDMA/133 [11602.152889] ata1: EH complete [11605.503128] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11605.503138] ata1.00: BMDMA stat 0x25 [11605.503146] ata1.00: failed command: READ DMA [11605.503161] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11605.503164] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11605.503171] ata1.00: status: { DRDY ERR } [11605.503177] ata1.00: error: { UNC } [11605.525173] ata1.00: configured for UDMA/133 [11605.525199] ata1: EH complete [11608.861735] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11608.861745] ata1.00: BMDMA stat 0x25 [11608.861753] ata1.00: failed command: READ DMA [11608.861768] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11608.861771] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11608.861779] ata1.00: status: { DRDY ERR } [11608.861784] ata1.00: error: { UNC } [11608.884944] ata1.00: configured for UDMA/133 [11608.884968] ata1: EH complete [11612.220094] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11612.220104] ata1.00: BMDMA stat 0x25 [11612.220112] ata1.00: failed command: READ DMA [11612.220127] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11612.220130] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11612.220137] ata1.00: status: { DRDY ERR } [11612.220143] ata1.00: error: { UNC } [11612.245276] ata1.00: configured for UDMA/133 [11612.245303] ata1: EH complete [11615.594873] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11615.594883] ata1.00: BMDMA stat 0x25 [11615.594891] ata1.00: failed command: READ DMA [11615.594906] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11615.594909] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11615.594917] ata1.00: status: { DRDY ERR } [11615.594922] ata1.00: error: { UNC } [11615.616866] ata1.00: configured for UDMA/133 [11615.616895] sd 0:0:0:0: [sda] Unhandled sense code [11615.616901] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11615.616911] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [11615.616922] Descriptor sense data with sense descriptors (in hex): [11615.616928] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [11615.616957] 06 db f4 42 [11615.616968] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [11615.616982] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 06 db f4 40 00 00 08 00 [11615.617009] end_request: I/O error, dev sda, sector 115078210 [11615.617044] ata1: EH complete [11619.028486] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11619.028496] ata1.00: BMDMA stat 0x25 [11619.028504] ata1.00: failed command: READ DMA [11619.028519] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11619.028522] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11619.028530] ata1.00: status: { DRDY ERR } [11619.028535] ata1.00: error: { UNC } [11619.052882] ata1.00: configured for UDMA/133 [11619.052904] ata1: EH complete [11622.386575] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11622.386585] ata1.00: BMDMA stat 0x25 [11622.386594] ata1.00: failed command: READ DMA [11622.386608] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11622.386611] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11622.386619] ata1.00: status: { DRDY ERR } [11622.386624] ata1.00: error: { UNC } [11622.408856] ata1.00: configured for UDMA/133 [11622.408880] ata1: EH complete [11625.761638] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11625.761648] ata1.00: BMDMA stat 0x25 [11625.761656] ata1.00: failed command: READ DMA [11625.761670] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11625.761673] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11625.761681] ata1.00: status: { DRDY ERR } [11625.761687] ata1.00: error: { UNC } [11625.785235] ata1.00: configured for UDMA/133 [11625.785261] ata1: EH complete [11629.145235] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11629.145245] ata1.00: BMDMA stat 0x25 [11629.145253] ata1.00: failed command: READ DMA [11629.145268] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11629.145271] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11629.145278] ata1.00: status: { DRDY ERR } [11629.145284] ata1.00: error: { UNC } [11629.169208] ata1.00: configured for UDMA/133 [11629.169235] ata1: EH complete [11632.520273] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11632.520283] ata1.00: BMDMA stat 0x25 [11632.520292] ata1.00: failed command: READ DMA [11632.520306] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11632.520309] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11632.520317] ata1.00: status: { DRDY ERR } [11632.520322] ata1.00: error: { UNC } [11632.545004] ata1.00: configured for UDMA/133 [11632.545027] ata1: EH complete [11635.911674] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [11635.911685] ata1.00: BMDMA stat 0x25 [11635.911693] ata1.00: failed command: READ DMA [11635.911708] ata1.00: cmd c8/00:08:40:f4:db/00:00:00:00:00/e6 tag 0 dma 4096 in [11635.911711] res 51/40:06:42:f4:db/00:00:00:00:00/e6 Emask 0x9 (media error) [11635.911718] ata1.00: status: { DRDY ERR } [11635.911724] ata1.00: error: { UNC } [11635.933234] ata1.00: configured for UDMA/133 [11635.933265] sd 0:0:0:0: [sda] Unhandled sense code [11635.933271] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11635.933280] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [11635.933291] Descriptor sense data with sense descriptors (in hex): [11635.933297] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [11635.933325] 06 db f4 42 [11635.933337] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [11635.933351] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 06 db f4 40 00 00 08 00 [11635.933377] end_request: I/O error, dev sda, sector 115078210 [11635.933420] ata1: EH complete