[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) [ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 00F800000 mask FFF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 000000000f800000 - 0000000010000000 (usable) ==> (reserved) [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 8MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/cpu/mtrr/cleanup.c:1092 mtrr_trim_uncached_memory+0x30c/0x32e() [ 0.000000] Hardware name: To Be Filled By O.E.M. [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.32-22-generic #33-Ubuntu [ 0.000000] Call Trace: [ 0.000000] [] warn_slowpath_common+0x72/0xa0 [ 0.000000] [] ? mtrr_trim_uncached_memory+0x30c/0x32e [ 0.000000] [] ? mtrr_trim_uncached_memory+0x30c/0x32e [ 0.000000] [] warn_slowpath_null+0x1a/0x20 [ 0.000000] [] mtrr_trim_uncached_memory+0x30c/0x32e [ 0.000000] [] setup_arch+0x41e/0x69f [ 0.000000] [] ? printk+0x1d/0x23 [ 0.000000] [] ? default_spin_lock_flags+0x9/0x10 [ 0.000000] [] start_kernel+0xc3/0x357 [ 0.000000] [] i386_start_kernel+0xaa/0xb1 [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] update e820 for mtrr [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000000f800000 (usable) [ 0.000000] modified: 000000000f800000 - 0000000010000000 (reserved) [ 0.000000] modified: 0000000010000000 - 000000003ff30000 (usable) [ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000000f800000 (usable) [ 0.000000] modified: 000000000f800000 - 0000000010000000 (reserved) [ 0.000000] modified: 0000000010000000 - 000000003ff30000 (usable) [ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data) [ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS) [ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 372db000 - 37fef437 [ 0.000000] Allocated new RAMDISK: 008de000 - 015f2437 [ 0.000000] Move RAMDISK from 00000000372db000 - 0000000037fef436 to 008de000 - 015f2436 [ 0.000000] ACPI: RSDP 000fa130 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ff30000 0002C (v01 A M I OEMRSDT 06000330 MSFT 00000097) [ 0.000000] ACPI: FACP 3ff30200 00081 (v01 A M I OEMFACP 06000330 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ff303f0 03600 (v01 P4P81 P4P81005 00000005 INTL 02002026) [ 0.000000] ACPI: FACS 3ff40000 00040 [ 0.000000] ACPI: APIC 3ff30390 0005C (v01 A M I OEMAPIC 06000330 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd172] BRK ==> [00008da000 - 00008dd172] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00015f2437] NEW RAMDISK ==> [00008de000 - 00015f2437] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff30 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000f800 [ 0.000000] 0: 0x00010000 -> 0x0003ff30 [ 0.000000] On node 0 totalpages: 259775 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c15f4200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 219438 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34339 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000000f800000 - 0000000010000000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257728 [ 0.000000] Kernel command line: root=UUID=51ca9094-9d09-4546-8ea0-828b8eac81d9 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5238400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff30) [ 0.000000] Memory: 1002972k/1047744k available (4673k kernel code, 35712k reserved, 2121k data, 656k init, 138440k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2593.593 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.18 BogoMIPS (lpj=10374372) [ 0.004032] Security Framework initialized [ 0.004062] AppArmor: AppArmor initialized [ 0.004072] Mount-cache hash table entries: 512 [ 0.004263] Initializing cgroup subsys ns [ 0.004270] Initializing cgroup subsys cpuacct [ 0.004277] Initializing cgroup subsys memory [ 0.004287] Initializing cgroup subsys devices [ 0.004291] Initializing cgroup subsys freezer [ 0.004295] Initializing cgroup subsys net_cls [ 0.004326] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004331] CPU: L2 cache: 512K [ 0.004335] CPU: Physical Processor ID: 0 [ 0.004337] CPU: Processor Core ID: 0 [ 0.004343] mce: CPU supports 4 MCE banks [ 0.004357] CPU0: Thermal monitoring enabled (TM1) [ 0.004371] Performance Events: no PMU driver, software events only. [ 0.004380] Checking 'hlt' instruction... OK. [ 0.023669] ACPI: Core revision 20090903 [ 0.031258] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.031265] ftrace: allocating 21771 entries in 43 pages [ 0.032102] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074185] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.008000] CPU: L2 cache: 512K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.160054] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 0.160074] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164032] Brought up 2 CPUs [ 0.164037] Total of 2 processors activated (10374.61 BogoMIPS). [ 0.164258] CPU0 attaching sched-domain: [ 0.164264] domain 0: span 0-1 level SIBLING [ 0.164269] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.164279] domain 1: span 0-1 level MC [ 0.164283] groups: 0-1 (cpu_power = 1178) [ 0.164293] CPU1 attaching sched-domain: [ 0.164297] domain 0: span 0-1 level SIBLING [ 0.164300] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.164310] domain 1: span 0-1 level MC [ 0.164314] groups: 0-1 (cpu_power = 1178) [ 0.164483] devtmpfs: initialized [ 0.164483] regulator: core version 0.5 [ 0.185185] Time: 12:15:15 Date: 05/01/10 [ 0.185256] NET: Registered protocol family 16 [ 0.185271] Trying to unpack rootfs image as initramfs... [ 0.185541] EISA bus registered [ 0.185561] ACPI: bus type pci registered [ 0.185758] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.185764] PCI: Using configuration type 1 for base access [ 0.188413] bio: create slab at 0 [ 0.189946] ACPI: EC: Look up EC in DSDT [ 0.194631] ACPI: Executed 1 blocks of module-level executable AML code [ 0.201151] ACPI: Interpreter enabled [ 0.201173] ACPI: (supports S0 S1 S3 S4 S5) [ 0.201231] ACPI: Using IOAPIC for interrupt routing [ 0.214503] ACPI: No dock devices found. [ 0.214739] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.214815] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.214831] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.214966] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] [ 0.215096] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f] [ 0.215168] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f] [ 0.215240] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f] [ 0.215311] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f] [ 0.215392] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff] [ 0.215472] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.215481] pci 0000:00:1d.7: PME# disabled [ 0.215598] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.215610] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.215618] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.215653] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.215664] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.215675] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.215686] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.215697] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.215708] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.215778] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.215839] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff] [ 0.215851] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf] [ 0.215862] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebff800-0xfebff9ff] [ 0.215874] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff400-0xfebff4ff] [ 0.215914] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.215922] pci 0000:00:1f.5: PME# disabled [ 0.216027] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.216039] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.216069] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9fffff] [ 0.216157] pci 0000:00:01.0: bridge 32bit mmio: [0xfc900000-0xfe9fffff] [ 0.216166] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe7f00000-0xf7efffff] [ 0.216223] pci 0000:02:05.0: reg 10 32bit mmio: [0xfeafe000-0xfeafffff] [ 0.216279] pci 0000:02:05.0: supports D1 D2 [ 0.216284] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216291] pci 0000:02:05.0: PME# disabled [ 0.216341] pci 0000:02:0a.0: reg 10 32bit mmio: [0xfeafc000-0xfeafdfff] [ 0.216437] pci 0000:00:1e.0: transparent bridge [ 0.216449] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.216469] pci_bus 0000:00: on NUMA node 0 [ 0.216484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.216687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.229143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.229336] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.229510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.229686] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.229879] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.230057] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.230234] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.230423] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.230664] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.230674] vgaarb: loaded [ 0.230942] SCSI subsystem initialized [ 0.231124] libata version 3.00 loaded. [ 0.231285] usbcore: registered new interface driver usbfs [ 0.231315] usbcore: registered new interface driver hub [ 0.231371] usbcore: registered new device driver usb [ 0.231753] ACPI: WMI: Mapper loaded [ 0.231758] PCI: Using ACPI for IRQ routing [ 0.232107] NetLabel: Initializing [ 0.232112] NetLabel: domain hash size = 128 [ 0.232115] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232142] NetLabel: unlabeled traffic allowed by default [ 0.232331] hpet clockevent registered [ 0.232338] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.232348] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.232360] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.236042] Switching to clocksource tsc [ 0.240389] AppArmor: AppArmor Filesystem Enabled [ 0.240426] pnp: PnP ACPI init [ 0.240464] ACPI: bus type pnp registered [ 0.247360] pnp: PnP ACPI: found 13 devices [ 0.247367] ACPI: ACPI bus type pnp unregistered [ 0.247376] PnPBIOS: Disabled by ACPI PNP [ 0.247440] system 00:09: ioport range 0x680-0x6ff has been reserved [ 0.247447] system 00:09: ioport range 0x290-0x297 has been reserved [ 0.247463] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.247471] system 00:0a: ioport range 0x800-0x87f has been reserved [ 0.247478] system 00:0a: ioport range 0x480-0x4bf has been reserved [ 0.247486] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.247493] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.247509] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.247517] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.247533] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.247541] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 0.247548] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.247554] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.247561] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.282532] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.282538] pci 0000:00:01.0: IO window: disabled [ 0.282547] pci 0000:00:01.0: MEM window: 0xfc900000-0xfe9fffff [ 0.282555] pci 0000:00:01.0: PREFETCH window: 0xe7f00000-0xf7efffff [ 0.282566] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.282571] pci 0000:00:1e.0: IO window: disabled [ 0.282581] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff [ 0.282588] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.282616] pci 0000:00:1e.0: setting latency timer to 64 [ 0.282625] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.282631] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.282637] pci_bus 0000:01: resource 1 mem: [0xfc900000-0xfe9fffff] [ 0.282643] pci_bus 0000:01: resource 2 pref mem [0xe7f00000-0xf7efffff] [ 0.282650] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.282656] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.282662] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.282749] NET: Registered protocol family 2 [ 0.282963] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.283749] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.284716] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.285272] TCP: Hash tables configured (established 131072 bind 65536) [ 0.285282] TCP reno registered [ 0.285499] NET: Registered protocol family 1 [ 0.285669] pci 0000:01:00.0: Boot video device [ 0.285924] cpufreq-nforce2: No nForce2 chipset. [ 0.285982] Scanning for low memory corruption every 60 seconds [ 0.286209] audit: initializing netlink socket (disabled) [ 0.286233] type=2000 audit(1272716114.283:1): initialized [ 0.298302] highmem bounce pool size: 64 pages [ 0.298313] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.302013] VFS: Disk quotas dquot_6.5.2 [ 0.302161] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.303657] fuse init (API version 7.13) [ 0.303871] msgmni has been set to 1689 [ 0.304404] alg: No test for stdrng (krng) [ 0.304575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.304586] io scheduler noop registered [ 0.304592] io scheduler anticipatory registered [ 0.304596] io scheduler deadline registered [ 0.304691] io scheduler cfq registered (default) [ 0.304942] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.304996] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.305212] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.305221] ACPI: Power Button [PWRB] [ 0.305333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.305341] ACPI: Power Button [PWRF] [ 0.305763] processor LNXCPU:00: registered as cooling_device0 [ 0.305853] processor LNXCPU:01: registered as cooling_device1 [ 0.314222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.314367] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.314984] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.317599] brd: module loaded [ 0.318791] loop: module loaded [ 0.319006] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.319267] ata_piix 0000:00:1f.1: version 2.13 [ 0.319288] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.319301] alloc irq_desc for 18 on node -1 [ 0.319306] alloc kstat_irqs on node -1 [ 0.319318] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.319385] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.319564] scsi0 : ata_piix [ 0.319684] isapnp: Scanning for PnP cards... [ 0.319756] scsi1 : ata_piix [ 0.322740] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.322745] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.323481] Fixed MDIO Bus: probed [ 0.323560] PPP generic driver version 2.4.2 [ 0.323666] tun: Universal TUN/TAP device driver, 1.6 [ 0.323670] tun: (C) 1999-2004 Max Krasnyansky [ 0.323845] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.323884] alloc irq_desc for 23 on node -1 [ 0.323888] alloc kstat_irqs on node -1 [ 0.323898] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.323924] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.323931] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.324001] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.324044] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.327940] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.328036] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00 [ 0.343528] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.343765] usb usb1: configuration #1 chosen from 1 choice [ 0.343822] hub 1-0:1.0: USB hub found [ 0.343840] hub 1-0:1.0: 8 ports detected [ 0.343968] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.344002] uhci_hcd: USB Universal Host Controller Interface driver [ 0.344073] alloc irq_desc for 16 on node -1 [ 0.344077] alloc kstat_irqs on node -1 [ 0.344088] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.344102] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.344109] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.344180] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.344226] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00 [ 0.344407] usb usb2: configuration #1 chosen from 1 choice [ 0.344459] hub 2-0:1.0: USB hub found [ 0.344473] hub 2-0:1.0: 2 ports detected [ 0.344555] alloc irq_desc for 19 on node -1 [ 0.344559] alloc kstat_irqs on node -1 [ 0.344568] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.344578] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.344584] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.344658] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.344694] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20 [ 0.344864] usb usb3: configuration #1 chosen from 1 choice [ 0.344916] hub 3-0:1.0: USB hub found [ 0.344929] hub 3-0:1.0: 2 ports detected [ 0.345009] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.345020] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.345026] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.345090] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.345127] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40 [ 0.345303] usb usb4: configuration #1 chosen from 1 choice [ 0.345355] hub 4-0:1.0: USB hub found [ 0.345370] hub 4-0:1.0: 2 ports detected [ 0.345452] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.345462] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.345468] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.345531] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.345557] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 [ 0.345727] usb usb5: configuration #1 chosen from 1 choice [ 0.345778] hub 5-0:1.0: USB hub found [ 0.345791] hub 5-0:1.0: 2 ports detected [ 0.345963] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.345967] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.346806] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.347021] mice: PS/2 mouse device common for all mice [ 0.347230] rtc_cmos 00:02: RTC can wake from S4 [ 0.347308] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.347338] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.347583] device-mapper: uevent: version 1.0.3 [ 0.372055] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.375914] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.415454] device-mapper: multipath: version 1.1.0 loaded [ 0.415461] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.419748] EISA: Probing bus 0 at eisa.0 [ 0.419794] EISA: Detected 0 cards. [ 0.503926] ata1.00: ATA-7: SAMSUNG SP1203N, TL100-23, max UDMA/100 [ 0.503933] ata1.00: 234493056 sectors, multi 16: LBA48 [ 0.504111] ata1.01: ATA-7: SAMSUNG SP1203N, TL100-23, max UDMA/100 [ 0.504117] ata1.01: 234493056 sectors, multi 16: LBA48 [ 0.506807] cpuidle: using governor ladder [ 0.506812] cpuidle: using governor menu [ 0.507793] TCP cubic registered [ 0.508038] NET: Registered protocol family 10 [ 0.508993] lo: Disabled Privacy Extensions [ 0.509739] NET: Registered protocol family 17 [ 0.509847] Using IPI No-Shortcut mode [ 0.510013] PM: Resume from disk failed. [ 0.510035] registered taskstats version 1 [ 0.510340] Magic number: 10:59:278 [ 0.510387] tty tty15: hash matches [ 0.510454] rtc_cmos 00:02: setting system clock to 2010-05-01 12:15:15 UTC (1272716115) [ 0.510460] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.510464] EDD information not available. [ 0.511873] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33 [ 0.511931] ata2.01: ATAPI: BENQ DVD DD DW1640, BSHB, max UDMA/33 [ 0.520159] ata1.00: configured for UDMA/100 [ 0.527717] ata2.00: configured for UDMA/33 [ 0.536323] ata1.01: configured for UDMA/100 [ 0.544333] ata2.01: configured for UDMA/33 [ 0.680529] isapnp: No Plug & Play device found [ 0.680791] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1203N TL10 PQ: 0 ANSI: 5 [ 0.681118] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.681363] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP1203N TL10 PQ: 0 ANSI: 5 [ 0.681613] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.681769] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/111 GiB) [ 0.681948] sd 0:0:0:0: [sda] Write Protect is off [ 0.681955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.682008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.682316] sda: sda1 [ 0.689352] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.689400] sd 0:0:1:0: [sdb] 234493056 512-byte logical blocks: (120 GB/111 GiB) [ 0.689508] sd 0:0:1:0: [sdb] Write Protect is off [ 0.689514] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.689560] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.689848] sdb: [ 0.694069] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5 [ 0.697901] sdb1 sdb2 sdb3 [ 0.708193] sd 0:0:1:0: [sdb] Attached SCSI disk [ 0.709729] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray [ 0.709736] Uniform CD-ROM driver Revision: 3.20 [ 0.709962] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.710086] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 0.712290] scsi 1:0:1:0: CD-ROM BENQ DVD DD DW1640 BSHB PQ: 0 ANSI: 5 [ 0.720321] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 0.720588] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.720716] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 0.731888] Freeing initrd memory: 13393k freed [ 0.747200] Freeing unused kernel memory: 656k freed [ 0.748152] Write protecting the kernel text: 4676k [ 0.748229] Write protecting the kernel read-only data: 1840k [ 0.789439] ramzswap: disk size set to 508720 kB [ 0.799189] udev: starting version 151 [ 0.885929] Adding 508716k swap on /dev/ramzswap0. Priority:100 extents:1 across:508716k SS [ 0.951733] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 0.986987] Linux agpgart interface v0.103 [ 1.034314] vga16fb: initializing [ 1.034323] vga16fb: mapped to 0xc00a0000 [ 1.034478] fb0: VGA16 VGA frame buffer device [ 1.047037] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.050270] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 1.114208] alloc irq_desc for 22 on node -1 [ 1.114215] alloc kstat_irqs on node -1 [ 1.114229] b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.117508] Floppy drive(s): fd0 is 1.44M [ 1.136156] FDC 0 is a post-1991 82077 [ 1.147578] usb 2-1: configuration #1 chosen from 1 choice [ 1.172176] ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0 [ 1.172234] b44.c:v2.0 [ 1.193490] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:6e:d7:2c:60 [ 1.269457] Console: switching to colour frame buffer device 80x30 [ 1.389032] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 1.566663] usb 3-2: configuration #1 chosen from 1 choice [ 1.607746] usbcore: registered new interface driver hiddev [ 1.607878] usbcore: registered new interface driver usbhid [ 1.607885] usbhid: v2.6:USB HID core driver [ 1.626167] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 1.626792] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 1.711464] xor: automatically using best checksumming function: pIII_sse [ 1.729019] pIII_sse : 2406.000 MB/sec [ 1.729028] xor: using function: pIII_sse (2406.000 MB/sec) [ 1.735698] device-mapper: dm-raid45: initialized v0.2594b [ 1.923440] EXT3-fs: INFO: recovery required on readonly filesystem. [ 1.923446] EXT3-fs: write access will be enabled during recovery. [ 4.367972] kjournald starting. Commit interval 5 seconds [ 4.367995] EXT3-fs: sdb1: orphan cleanup on readonly fs [ 4.368027] ext3_orphan_cleanup: deleting unreferenced inode 32817 [ 4.386471] ext3_orphan_cleanup: deleting unreferenced inode 671951 [ 4.393416] ext3_orphan_cleanup: deleting unreferenced inode 61725 [ 4.400344] ext3_orphan_cleanup: deleting unreferenced inode 61731 [ 4.403941] ext3_orphan_cleanup: deleting unreferenced inode 61732 [ 4.403962] ext3_orphan_cleanup: deleting unreferenced inode 61734 [ 4.403983] ext3_orphan_cleanup: deleting unreferenced inode 61736 [ 4.404017] ext3_orphan_cleanup: deleting unreferenced inode 61739 [ 4.411209] ext3_orphan_cleanup: deleting unreferenced inode 61741 [ 4.411233] ext3_orphan_cleanup: deleting unreferenced inode 573443 [ 4.422952] EXT3-fs: sdb1: 10 orphan inodes deleted [ 4.422957] EXT3-fs: recovery complete. [ 4.436176] EXT3-fs: mounted filesystem with ordered data mode. [ 29.451029] Adding 996020k swap on /dev/sdb2. Priority:-1 extents:1 across:996020k [ 29.817256] udev: starting version 151 [ 30.322889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.367924] intel_rng: FWH not detected [ 30.408118] lp: driver loaded but no devices found [ 30.447804] Linux video capture interface: v2.00 [ 30.802579] EXT3 FS on sdb1, internal journal [ 30.839395] gspca: main v2.7.0 registered [ 30.854358] parport_pc 00:08: reported by Plug and Play ACPI [ 30.854410] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 30.948314] lp0: using parport0 (interrupt-driven). [ 31.642045] type=1505 audit(1272708946.630:2): operation="profile_load" pid=613 name="/sbin/dhclient3" [ 31.642639] type=1505 audit(1272708946.630:3): operation="profile_load" pid=613 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 31.642961] type=1505 audit(1272708946.630:4): operation="profile_load" pid=613 name="/usr/lib/connman/scripts/dhclient-script" [ 32.968123] type=1505 audit(1272708947.957:5): operation="profile_load" pid=697 name="/usr/sbin/ntpd" [ 33.516977] nvidia: module license 'NVIDIA' taints kernel. [ 33.516983] Disabling lock debugging due to kernel taint [ 34.108848] ppdev: user-space parallel port driver [ 34.110390] gspca: probing 0ac8:301b [ 34.110795] cfg80211: Calling CRDA to update world regulatory domain [ 34.153976] cfg80211: World regulatory domain updated: [ 34.153984] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 34.153989] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.153995] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 34.154000] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 34.154005] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.154010] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 34.215923] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 34.216451] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 34.448373] zc3xx: probe sensor -> 000a [ 34.448379] zc3xx: Find Sensor PB0330. Chip revision 0 [ 34.452478] gspca: probe ok [ 34.452516] usbcore: registered new interface driver zc3xx [ 34.452521] zc3xx: registered [ 34.672572] rt2500pci 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 34.771891] phy0: Selected rate control algorithm 'minstrel' [ 34.773781] Registered led device: rt2500pci-phy0::radio [ 34.773829] Registered led device: rt2500pci-phy0::quality [ 35.049072] alloc irq_desc for 17 on node -1 [ 35.049079] alloc kstat_irqs on node -1 [ 35.049094] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 35.049172] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 35.064366] kjournald starting. Commit interval 5 seconds [ 35.064594] EXT3 FS on sdb3, internal journal [ 35.064603] EXT3-fs: mounted filesystem with ordered data mode. [ 35.472021] intel8x0_measure_ac97_clock: measured 52044 usecs (2508 samples) [ 35.472027] intel8x0: clocking to 48000 [ 41.479308] type=1505 audit(1272708956.465:6): operation="profile_load" pid=827 name="/usr/share/gdm/guest-session/Xsession" [ 41.482671] type=1505 audit(1272708956.469:7): operation="profile_replace" pid=828 name="/sbin/dhclient3" [ 41.483288] type=1505 audit(1272708956.469:8): operation="profile_replace" pid=828 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 41.483623] type=1505 audit(1272708956.469:9): operation="profile_replace" pid=828 name="/usr/lib/connman/scripts/dhclient-script" [ 41.489723] type=1505 audit(1272708956.477:10): operation="profile_load" pid=829 name="/usr/bin/evince" [ 41.497847] type=1505 audit(1272708956.485:11): operation="profile_load" pid=829 name="/usr/bin/evince-previewer" [ 41.502750] type=1505 audit(1272708956.489:12): operation="profile_load" pid=829 name="/usr/bin/evince-thumbnailer" [ 41.513569] type=1505 audit(1272708956.501:13): operation="profile_load" pid=831 name="/usr/lib/cups/backend/cups-pdf" [ 41.514314] type=1505 audit(1272708956.501:14): operation="profile_load" pid=831 name="/usr/sbin/cupsd" [ 41.517880] type=1505 audit(1272708956.505:15): operation="profile_load" pid=832 name="/usr/sbin/mysqld-akonadi" [ 42.251802] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 42.251809] apm: disabled - APM is not SMP safe. [ 42.344980] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.377007] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.147402] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 44.147440] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 44.147515] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 49.956680] wlan0: deauthenticating from 00:19:5b:f7:12:94 by local choice (reason=3) [ 49.957066] wlan0: direct probe to AP 00:19:5b:f7:12:94 (try 1) [ 49.959328] wlan0: direct probe responded [ 49.959340] wlan0: authenticate with AP 00:19:5b:f7:12:94 (try 1) [ 49.960941] wlan0: authenticated [ 49.960998] wlan0: associate with AP 00:19:5b:f7:12:94 (try 1) [ 49.963780] wlan0: RX AssocResp from 00:19:5b:f7:12:94 (capab=0x471 status=0 aid=1) [ 49.963795] wlan0: associated [ 49.965039] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 50.071766] padlock: VIA PadLock not detected. [ 50.156043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 50.416424] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 50.660078] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 50.916061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 51.168682] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 51.364062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 51.624057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 51.804034] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 51.984098] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 52.236151] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 52.436069] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 52.784075] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 53.216068] end_request: I/O error, dev fd0, sector 0 [ 53.268056] end_request: I/O error, dev fd0, sector 0 [ 53.504061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 53.796063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 54.501131] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 55.617921] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 56.252060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 56.408029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 56.661071] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 56.861054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 57.772024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 57.929042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 59.616032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 59.996019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 60.436012] wlan0: no IPv6 routers present [ 64.132017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 68.505029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 68.780029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 69.164037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 97.920025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 100.000088] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 100.920028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 103.044022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 106.016029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 108.629080] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 108.709035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 109.000021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 109.432017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 114.560065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 114.812019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.021023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.228031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.445098] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.648020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 116.053019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 116.244029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 119.112017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 129.977034] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 130.860018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 131.957022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 132.427513] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 135.076036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 140.344017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 168.548017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 168.729020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 171.057048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.064035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.365037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.565023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.768019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.980019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.184044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.392029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.788039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 179.702623] ata1: drained 32768 bytes to clear DRQ. [ 179.761879] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 179.761886] ata1.01: BMDMA stat 0x65 [ 179.761892] ata1.01: failed command: READ DMA [ 179.761900] ata1.01: cmd c8/00:00:3f:7f:46/00:00:00:00:00/f0 tag 0 dma 131072 in [ 179.761902] res 59/01:e8:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 179.761906] ata1.01: status: { DRDY DRQ ERR } [ 179.761937] ata1: soft resetting link [ 179.940307] ata1.00: configured for UDMA/100 [ 179.948312] ata1.01: configured for UDMA/100 [ 179.948330] ata1: EH complete [ 180.959906] ata1: drained 32768 bytes to clear DRQ. [ 181.019110] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 181.019116] ata1.01: BMDMA stat 0x65 [ 181.019122] ata1.01: failed command: READ DMA [ 181.019130] ata1.01: cmd c8/00:00:3f:7f:46/00:00:00:00:00/f0 tag 0 dma 131072 in [ 181.019132] res 59/01:e8:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 181.019136] ata1.01: status: { DRDY DRQ ERR } [ 181.019167] ata1: soft resetting link [ 181.196305] ata1.00: configured for UDMA/100 [ 181.204316] ata1.01: configured for UDMA/100 [ 181.204334] ata1: EH complete [ 182.217189] ata1: drained 32768 bytes to clear DRQ. [ 182.276394] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 182.276399] ata1.01: BMDMA stat 0x65 [ 182.276406] ata1.01: failed command: READ DMA [ 182.276414] ata1.01: cmd c8/00:00:3f:7f:46/00:00:00:00:00/f0 tag 0 dma 131072 in [ 182.276415] res 59/01:e8:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 182.276420] ata1.01: status: { DRDY DRQ ERR } [ 182.276451] ata1: soft resetting link [ 182.456306] ata1.00: configured for UDMA/100 [ 182.464313] ata1.01: configured for UDMA/100 [ 182.464331] ata1: EH complete [ 183.482799] ata1: drained 32768 bytes to clear DRQ. [ 183.542178] ata1.01: limiting speed to UDMA/66:PIO4 [ 183.542185] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 183.542190] ata1.01: BMDMA stat 0x65 [ 183.542196] ata1.01: failed command: READ DMA [ 183.542204] ata1.01: cmd c8/00:00:3f:7f:46/00:00:00:00:00/f0 tag 0 dma 131072 in [ 183.542206] res 59/01:e8:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 183.542210] ata1.01: status: { DRDY DRQ ERR } [ 183.542242] ata1: soft resetting link [ 183.720305] ata1.00: configured for UDMA/100 [ 183.728304] ata1.01: configured for UDMA/66 [ 183.728322] ata1: EH complete [ 184.748407] ata1: drained 32768 bytes to clear DRQ. [ 184.807729] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 184.807735] ata1.01: BMDMA stat 0x65 [ 184.807741] ata1.01: failed command: READ DMA [ 184.807749] ata1.01: cmd c8/00:00:3f:7f:46/00:00:00:00:00/f0 tag 0 dma 131072 in [ 184.807751] res 59/01:e8:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 184.807755] ata1.01: status: { DRDY DRQ ERR } [ 184.807786] ata1: soft resetting link [ 184.984325] ata1.00: configured for UDMA/100 [ 184.992309] ata1.01: configured for UDMA/66 [ 184.992347] ata1: EH complete [ 186.005690] ata1: drained 32768 bytes to clear DRQ. [ 186.064905] ata1.01: limiting speed to UDMA/33:PIO4 [ 186.064914] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 186.064922] ata1.01: BMDMA stat 0x65 [ 186.064930] ata1.01: failed command: READ DMA [ 186.064943] ata1.01: cmd c8/00:00:3f:7f:46/00:00:00:00:00/f0 tag 0 dma 131072 in [ 186.064945] res 59/01:e8:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 186.064952] ata1.01: status: { DRDY DRQ ERR } [ 186.064989] ata1: soft resetting link [ 186.244303] ata1.00: configured for UDMA/100 [ 186.252321] ata1.01: configured for UDMA/33 [ 186.252347] sd 0:0:1:0: [sdb] Unhandled sense code [ 186.252351] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 186.252356] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] [ 186.252365] Descriptor sense data with sense descriptors (in hex): [ 186.252369] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 186.252390] 00 46 7f 57 [ 186.252398] sd 0:0:1:0: [sdb] Add. Sense: Address mark not found for data field [ 186.252406] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 46 7f 3f 00 01 00 00 [ 186.252424] end_request: I/O error, dev sdb, sector 4620119 [ 186.252462] ata1: EH complete [ 187.304605] ata1: drained 32768 bytes to clear DRQ. [ 187.363981] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 187.363990] ata1.01: BMDMA stat 0x65 [ 187.363999] ata1.01: failed command: READ DMA [ 187.364022] ata1.01: cmd c8/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 dma 4096 in [ 187.364025] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 187.364033] ata1.01: status: { DRDY DRQ ERR } [ 187.364070] ata1: soft resetting link [ 187.544308] ata1.00: configured for UDMA/100 [ 187.552353] ata1.01: configured for UDMA/33 [ 187.552380] ata1: EH complete [ 188.634798] ata1: drained 32768 bytes to clear DRQ. [ 188.637925] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 188.637932] ata1.01: BMDMA stat 0x65 [ 188.637938] ata1.01: failed command: READ DMA [ 188.637946] ata1.01: cmd c8/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 dma 4096 in [ 188.637948] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 188.637952] ata1.01: status: { DRDY DRQ ERR } [ 188.637984] ata1: soft resetting link [ 188.816527] ata1.00: configured for UDMA/100 [ 188.824327] ata1.01: configured for UDMA/33 [ 188.824346] ata1: EH complete [ 189.844153] ata1: drained 32768 bytes to clear DRQ. [ 189.903526] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 189.903532] ata1.01: BMDMA stat 0x65 [ 189.903538] ata1.01: failed command: READ DMA [ 189.903546] ata1.01: cmd c8/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 dma 4096 in [ 189.903548] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 189.903552] ata1.01: status: { DRDY DRQ ERR } [ 189.903584] ata1: soft resetting link [ 190.080329] ata1.00: configured for UDMA/100 [ 190.088306] ata1.01: configured for UDMA/33 [ 190.088322] ata1: EH complete [ 191.101438] ata1: drained 32768 bytes to clear DRQ. [ 191.160640] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 191.160646] ata1.01: BMDMA stat 0x65 [ 191.160652] ata1.01: failed command: READ DMA [ 191.160660] ata1.01: cmd c8/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 dma 4096 in [ 191.160662] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 191.160666] ata1.01: status: { DRDY DRQ ERR } [ 191.160697] ata1: soft resetting link [ 191.340305] ata1.00: configured for UDMA/100 [ 191.348307] ata1.01: configured for UDMA/33 [ 191.348325] ata1: EH complete [ 192.424796] ata1: drained 32768 bytes to clear DRQ. [ 192.426477] ata1.01: limiting speed to PIO4 [ 192.426488] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 192.426497] ata1.01: BMDMA stat 0x65 [ 192.426506] ata1.01: failed command: READ DMA [ 192.426519] ata1.01: cmd c8/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 dma 4096 in [ 192.426521] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x2 (HSM violation) [ 192.426528] ata1.01: status: { DRDY DRQ ERR } [ 192.426577] ata1: soft resetting link [ 192.604305] ata1.00: configured for UDMA/100 [ 192.612306] ata1.01: configured for PIO4 [ 192.612323] ata1: EH complete [ 193.681649] ata1: drained 32768 bytes to clear DRQ. [ 193.695384] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 193.695393] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 193.695403] ata1.01: failed command: READ MULTIPLE [ 193.695416] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 193.695419] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 193.695427] ata1.01: status: { DRDY DRQ ERR } [ 193.695463] ata1: soft resetting link [ 193.872302] ata1.00: configured for UDMA/100 [ 193.880305] ata1.01: configured for PIO4 [ 193.880327] sd 0:0:1:0: [sdb] Unhandled sense code [ 193.880330] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 193.880336] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] [ 193.880345] Descriptor sense data with sense descriptors (in hex): [ 193.880348] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 193.880369] 00 46 7f 57 [ 193.880378] sd 0:0:1:0: [sdb] Add. Sense: Address mark not found for data field [ 193.880386] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 46 7f 57 00 00 08 00 [ 193.880404] end_request: I/O error, dev sdb, sector 4620119 [ 193.880429] ata1: EH complete [ 194.960018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 195.406183] ata1: drained 32768 bytes to clear DRQ. [ 195.477321] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 195.477328] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 195.477334] ata1.01: failed command: READ MULTIPLE [ 195.477343] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 195.477344] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 195.477349] ata1.01: status: { DRDY DRQ ERR } [ 195.477380] ata1: soft resetting link [ 195.660345] ata1.00: configured for UDMA/100 [ 195.668313] ata1.01: configured for PIO4 [ 195.668332] ata1: EH complete [ 195.976021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 196.700286] ata1: drained 32768 bytes to clear DRQ. [ 196.759636] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 196.759645] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 196.759654] ata1.01: failed command: READ MULTIPLE [ 196.759667] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 196.759670] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 196.759678] ata1.01: status: { DRDY DRQ ERR } [ 196.759717] ata1: soft resetting link [ 196.936305] ata1.00: configured for UDMA/100 [ 196.944317] ata1.01: configured for PIO4 [ 196.944335] ata1: EH complete [ 197.552084] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 198.012573] ata1: drained 32768 bytes to clear DRQ. [ 198.033390] ata1.01: limiting speed to PIO3 [ 198.033400] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 198.033408] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 198.033417] ata1.01: failed command: READ MULTIPLE [ 198.033430] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 198.033433] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 198.033440] ata1.01: status: { DRDY DRQ ERR } [ 198.033481] ata1: soft resetting link [ 198.212313] ata1.00: configured for UDMA/100 [ 198.220326] ata1.01: configured for PIO3 [ 198.220344] ata1: EH complete [ 199.258672] ata1: drained 32768 bytes to clear DRQ. [ 199.307388] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 199.307394] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 199.307400] ata1.01: failed command: READ MULTIPLE [ 199.307408] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 199.307410] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 199.307414] ata1.01: status: { DRDY DRQ ERR } [ 199.307445] ata1: soft resetting link [ 199.484304] ata1.00: configured for UDMA/100 [ 199.492326] ata1.01: configured for PIO3 [ 199.492343] ata1: EH complete [ 199.968022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 200.563755] ata1: drained 32768 bytes to clear DRQ. [ 200.581327] ata1.01: limiting speed to PIO0 [ 200.581333] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 200.581339] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 200.581345] ata1.01: failed command: READ MULTIPLE [ 200.581353] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 200.581355] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 200.581359] ata1.01: status: { DRDY DRQ ERR } [ 200.581390] ata1: soft resetting link [ 200.760301] ata1.00: configured for UDMA/100 [ 200.768444] ata1.01: configured for PIO0 [ 200.768462] ata1: EH complete [ 201.805335] ata1: drained 32768 bytes to clear DRQ. [ 201.870721] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 201.870727] ata1.01: ST-ATA: BUSY|DRQ persists on ERR|DF, dev_stat 0x59 [ 201.870733] ata1.01: failed command: READ MULTIPLE [ 201.870742] ata1.01: cmd c4/00:08:57:7f:46/00:00:00:00:00/f0 tag 0 pio 4096 in [ 201.870744] res 59/01:08:57:7f:46/00:00:00:00:00/f0 Emask 0x3 (HSM violation) [ 201.870748] ata1.01: status: { DRDY DRQ ERR } [ 201.870779] ata1: soft resetting link [ 202.048324] ata1.00: configured for UDMA/100 [ 202.056552] ata1.01: configured for PIO0 [ 202.056582] sd 0:0:1:0: [sdb] Unhandled sense code [ 202.056589] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 202.056598] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] [ 202.056610] Descriptor sense data with sense descriptors (in hex): [ 202.056616] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 202.056645] 00 46 7f 57 [ 202.056657] sd 0:0:1:0: [sdb] Add. Sense: Address mark not found for data field [ 202.056668] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 46 7f 57 00 00 08 00 [ 202.056693] end_request: I/O error, dev sdb, sector 4620119 [ 202.056733] ata1: EH complete [ 202.556021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 202.853083] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).